Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Healthcare and Medicine
Eprocure
Opening Date5 Jul 2024
Closing Date24 Sep 2024
Tender Amount₹ 1,25,00,00,000
Costs
EMD
₹ 15,00,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_615934_3Bid Award Id
ViewTender No
CA NO. CEPZ-17/2023-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Lumpsum price worked out by the contractor for Earth Work and site clearance Works as listed in Schedule 'A' Part-IV.
1
-
63260843.5
Lumpsum price worked out by the contractor for Protective Works as listed in Schedule 'A' Part-V.
1
-
21662234.92
Lumpsum price worked out by the contractor for Roads, Path, Culverts and Hardstandings works as listed in Schedule 'A' Part-VI.
1
-
61190041.26
Lumpsum price worked out by the contractor for Sewage Disposal works as listed in Schedule 'A' Part-VII.
1
-
11584908.94
Lumpsum price worked out by the contractor for Area Drainage works as listed in Schedule 'A' Part-VIII.
1
-
13055034.48
Lumpsum price worked out by the contractor for Security fencing and Gate works as listed in Schedule 'A' Part-IX.
1
-
7945298.15
Lumpsum price worked out by the contractor for Rain Water Harvesting Works as listed in Schedule 'A' Part-X.
1
-
1979631.24
Lumpsum price worked out by the contractor for External Electrification Works as listed in Schedule 'A' Part-XI.
1
-
31484710.18
Lumpsum price worked out by the contractor for External Water Supply Works as listed in Schedule 'A' Part-XII.
1
-
1762362.4
Lumpsum price worked out by the contractor for Lightning Protection works as listed in Schedule 'A' Part-XIII.
1
-
677625.4
Lumpsum price worked out by the contractor for DG Set works as listed in Schedule 'A' Part-XIV.
1
-
47344
Lumpsum price worked out by the contractor for Fire Fighting works as listed in Schedule 'A' Part-XV.
1
-
23349525
Lumpsum price worked out by the contractor for Refrigeration Works as listed in Schedule 'A' Part-XVI.
1
-
4199431.2
BLANK
-
-
-
(BOQ Schedule 'A' Part-XVIII). Internal Electrification.
-
-
-
Supply and fix LED lamp 3W suitable for back plate for angle/ battern fitting. (Night Lamp)
277
-
-
Supply and fixing of indoor type surface mounted Linear LED fitting white CRCA powder coated with total system wattage 18-20W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 lm/W and minimum system lumens 2000.
1125
-
-
Supply and fixing of indoor type 10W surface/wall mounted LED batten fitting (Mirror Light) covered by diffuser, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type. (similar to BCLSB 10W LED Mirror light or equivalent) (LED Mirror Light/Bedhead side)
447
-
-
Supply and fixing of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 10-12W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 lm/W and minimum system lumens 1000.
457
-
-
Supply and fix portable Shadow less light fitting complete with emergency power unit & battery back up for min 30 minutes (3 KVA), having dome of 650 mm dia, fully counter balanced and fixed on suspension rod, capable of having axial rotation of 360 deg. The unit to be suitable for minor OT and Capable for operation on 230 V single phase, 50 cycles mains supply having lux level 70,000. (For Major OT having lux level 70,000)
4
-
-
M&L for PVC concealed conduit 15mm and all accessories (ISI marked) of 1.8mm thickness, heavy grade of suitable size for provision of passing of cable/wire for TV, Intercom, Tele phone , Data, complete all as specified and as directed.
18500
-
-
M&L including terminations of Co-axial TV RG-6 grade, 0.7 mm solid annealed bare electrolytic grade copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
2350
-
-
M&L Cable TV splitter 4Way O/G with 1-Way I/C complete incl mounting inside PVC Box of Suitble size flushed to wall.
38
-
-
M&L for modular TV Co-axial socket outlet 1 module on the existing modular plate & switch box including connections complete all specified and directed.
64
-
-
M&L for PVC conduit and all accessories (ISI marked) of 1.8mm thickness, heavy grade of suitable size for provision of passing of cable/wire for TV, Intercom, Tele phone , complete all as specified and as directed.
750
-
-
M&L for modular 250Volts Telephone socket outlet (RJ-11) with shutter 1 module on the existing modular plate & switch box including connections complete all as specified and directed.
201
-
-
M&L of 1 or 2 Module Modular base & cover plate on existing modular metal/PVC boxes etc. as required
307
-
-
M&L 1 or 2 Module (75 mmX75 mm) modules, 0.8mm thick GI box for modular switches in recess etc as required.
450
-
-
M&L for Telephone cables with high density polyethelene insulated, solid annealed high conductivity bare copper with DIA 0.5mm, paired , polyester taped and sheathed with high oxygen index Fire retardent PVC compound , generally conforming to ITD specifications G / WIR-06/02. May 94 of 4-Pair drawn through PVC conduit and connecting and testing complete.
10342
-
-
Supply and fix exhaust Fan 300mm sweep, 900RPM, heavy duty complete with all acccessories internal pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.
63
-
-
Supply and fix louvers suitable for exhaust Fan 300mm sweep of GI sheet incl fixing arrangement like nut, bolts, washers etc complete all as specified and as directed.
63
-
-
Supply and fix exhaust Fan 450mm sweep, 900RPM, heavy duty metal body complete with all acccessories internal pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.
7
-
-
Supply and fix louvers suitable for exhaust Fan 450mm sweep of GI sheet incl fixing arrangement like nut, bolts, washers etc complete all as specified and as directed.
7
-
-
M&L for concealed point wiring with single core FRLS PVC insulated & unsheathed cable with multistranded copper conductor 1.5 sqmm drawn in & including PVC conduit of suitable size (ISI marked) having thickness not less than 1.8mm with all accessories heavy grade in wall/ceilling including FRLS PVC insulated unsheathed single core cable 1.5 sqmm copper wire as earth contunity conductor, complete all as specified for the following. Note : Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained:-
-
-
-
(i) Three corridor light point controlled by one MCB Controlled. MCB Cost not include.
5
-
-
(ii) Four corridor light point controlled by one MCB Controlled. MCB Cost not include.
7
-
-
(iii) Five corridor light point controlled by one MCB Controlled. MCB Cost not include.
6
-
-
(iv) Six corridor light point controlled by one MCB Controlled. MCB Cost not include.
5
-
-
(v) Seven corridor light point controlled by one MCB Controlled. MCB Cost not include.
5
-
-
(vi) Eight corridor light point controlled by one MCB Controlled. MCB Cost not include.
3
-
-
(vii) Nine corridor light point controlled by one MCB Controlled. MCB Cost not include.
2
-
-
(viii) Ten light point controlled by one, Corridore light point controlled by one, MCB Controlled. MCB Cost not include.
2
-
-
LIGHT FIXURE INBUILT (PIR SENSOR) Supply and fixing of reccessed 2'x2' inbuilt PIR sensor white CRCA powder coated white after phosphochromate treatment. High transmittance polystyrene opal diffuser forglare free symmetric light distribution.High efficiency long life LED package with lumenefficacy of 140lm/W with a viewing angle of 120° to ensure better lumen output ( For detailed photometric data, please refer LM 79 report & IES file).Built in Isolated, SELV Output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test as per IS:15885 Part 2/Sec 13 & CISPR15. PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range.They are small, inexpensive, low-power, easy to use and don’t wear out.
104
-
-
G.I. PERFORATED CABLE TRAY
Supply, fabrication and installation of G.I. Sheet factory fabricated perforated type cable trays complete with all bends, tees, elbows, reducers etc. of various width (galvanisation thickness not less than 80 microns) with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. as per IS code 2629-1985. (The cost of angle iron/ 'C' Channel, Fastner & GI Down rod shall be included here).
-
-
-
(i) 100mm tray, 1.6mm thick 40mm collar.
300
-
-
(ii) 150mm tray, 1.6mm thick 40mm collar.
1150
-
-
(iii) 300mm tray, 2mm thick 40mm collar.
450
-
-
(iv) 450mm tray, 2mm thick 40mm collar.
190
-
-
G.I. LADDER TYPE CABLE TRAY
Supply, fabrication and installation of G.I. Sheet factory built in ladder type cable trays complete with all bends, tees, elbows, reducers etc. with rungs at every 250mm spacing of various width in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. as per IS code 2629-1985. (All bends & tee shall be of factory built-in of same make as that of tray).
-
-
-
(i) 450mm tray, 2mm thick, (75X15X2 side channel) (rung-35X15X2mm)
250
-
-
(ii) 600mm tray, 2mm thick, (75X20X2 side channel) (rung-35X15X2mm)
160
-
-
Nurse Call System
Supply, Installation Testing and Commissioning of Microprocessor controller Nurses station with terminal monitor with in built power supply , with charger enclosed in a powder coated cabinet . Having with Reset, alarm/ buzzer, Call acknowledge with battery back up, battery charger complete system as per technical specifications and as per required of following suitable configuration. complte as required.
-
-
-
(i) 24 Way
10
-
-
(ii) 16 Way
14
-
-
Supply Installation Testing & Commissioning of Bed Call Push Button with LED indication and Flexiable Cord with button , Call Reset , Call Indication, station for each Bed complete as required.
250
-
-
Supply Installation Testing & Commissioning of Pull cord station for toilet with LED indication and flexiable cord with button, Call Reset, Call Indication, station for complete as required.
75
-
-
Supply Installation Testing & Commissioning of LED Indicators Module at Outside of each ward complete as required.
115
-
-
Supplying & Laying of 4-pair Unshielded twisted pair with a cross filler (+), meeting Category 6 standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-2 & IEC 60754-1 respectively in the existing surface/ recessed Steel/ PVC conduit as required.
14500
-
-
VTPNDB-1(12-WAY) TYPICALLY BLOCK-A, B, C, D & E (NON-ESSENTIAL / ESSENTIAL) & UPS O/P Panel (Indoor Use) INCOMER-1 FROM MDB-1,2,3,4&5 NON-ESSENTIAL / ESSENTIAL PANEL SUPPLY Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
8 way (4 + 24), Double door
6
-
-
12 way (4 + 36), Double door
29
-
-
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
35
-
-
(BOQ Schedule 'A' Part-XIX). . ELECTRICAL PANELS (INTERNAL AREA PANEL) . Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to Sub-Station at various locations, handling, assembling, installation in correct aligned position, making proper connections, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of the following Modular cubical type construction, Electrical Panels up to 450Volts ±10%, 3Phase, 4Wire, 50Hz ±6%, are housed in CRCA Sheet bolted cubicle made up of 3.15mm for non-stress members & 2.0mm for all stress bearing members and 3.15mm for Removable Glad Plate & base Frame Meterial, unless specified otherwise, vermin proof hinged lockable doors & door earthed for each compartment provide bus bar interconnections for incoming and outgoing, Single front compartmentalized, totally enclosed, free standing, Floor / Wall mounted type as case may, indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site. The Bus bars will be Copper purity 99.9% / electrolytic grade E91 Aluminium duly sleeved with Helogen Free heat shrink coloured Insulated tube confirming to RoHS & IEC 6068-3-247 Standard. Provide electrical insulating shrouds, reusable type covers for busbars Boots on corners Panels will be painted with Powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB/MCCB. General Notes for site visit report for Panels/ Rising Main before submitting GA.
-
-
-
The Manufacturer must visit the site before submitting GA drawings and submit a report consisting following: (a) Possible height for Panel. (b) Possible width for Panel. (c) Back access will be possible or not. (d) Cable entry will be from top or bottom. (e) If entry from bottom whether MS. Stand is required or not. (f) If the panel is wall mounted whether the wall is available or not.(g) Path for movement of transportation of panel is possible or not i.e length, width etc. and the transportation sections shall be designed accordingly. (h) Sufficient space available at front & back after door opening. (i) Sufficient height available above panel for cable drop. (j) Actual floor to floor height for rising mains. Also, refer to General Notes and Specifications for Panels/ Boards. (a) Contractor to submit manufacturer's selection charts, Discrimination check certificate, insulation material & corners cover on bus-bars for approval. (b) If mentioned fault rating of bus-bar and circuit breaker is unavailable consider next available upside rating. (c) Mimic diagram shall be provided on all panels. (d) It is recommonded that only one make of switchgear to be used in a board / Panel. (e) All live accessible parts shall be shrouded and all equipment shall be finger touch proof. SMC shrouds busbar supports shall be used. Padlocking facility shall be provided on all MCCB feeders doors and switch handles shall be locakble in OFF position. (f) Equipments will be offered for following routine test only:- i). Check of Bill of Materials as per approved drawing, ii). Visual and Dimensional Check, iii) Functional Check, iv) HV/Megger test as per relevant IS. v) Type tests from CPRI of any two panels as choice of electrical consultant.
-
-
-
(g) Minimum/Maximum Operating height:- 300/1800 respectively. (h) Sealing Arrangement:- PE Foam Rubber Gasket. (i) Bus Bars Supports:- Non-Hygroscopic, Non Carbonising, Corrosinn Resistant, SMC Supports. (j) 1 Set of connector (Phase+Neutral) shall be provided in cable alley for all outgoing with interconnection wires between MCB and Connector. (k) All floor mounted electrical panel shall have a common hot dip G.I. earth bar of size minimum 32mm x 6mm at the rear and wall mounted panel with earth stud at bottom both side. Electrical panels incomer above 35kA shall have a common hot dip Aluminium earth bar of size minimum 50mm x 6mm at the rear in bottom. (l) Bottom base channel of floor standing panel shall be made of M.S. angle iron, not less than 50mm x 50mm x 5mm thick for panel overall height upto 1800mm and above in height 75mm x 75mm x 6mm thick, fabrication shall be done in transportable sections. Similarly, All outdoor use panel shall have bottom base stand of minimum 450mm M.S. angle iron 32mmx 32mmx6mm with fixing arrangement in RCC foundation. (m) No derating shall be applicable upto ambient temp. 50ºC for all breakers and selected components. (n) Each door other than bus bar section shall be 2 numbers wing knob cabinet cam lock with master key lock made of zinc alloy powder coated housing, handle and chrome plated cylinder and nut CL001. (o) Minimum Air Clearances between bus bars; (Calculation with required supporting document shall be submitted by Panel manufecturer along with GA diagram). P-P=32mm, P-N=32mm,P-E=26mm and N-E=26mm. (p) Panel Power and control Wiring all FRLS PVC insulated. AC voltage circuit-1.5 sqmm Red,Yellow,Blue &Black Current circuit-1.5 sqmm Red,Yellow,Blue &Black AC Control circuit-1.5 sqmm White for Phase & Black for Neutral DC Control circuit-2.5 sqmm Grey Power circuit- Red,Yellow,Blue for Phase & Black for Neutral
-
-
-
Labelling:- Computerised Laminated Aluminium Name Plate with White letters on Blue/Black Background For Each Feeder and Panel Itself. (q) The treatment of Panel Shall be Fully automatic 9-tank process for metal treatment which consists of Solvent/ Alkaline Degreasing, Activation, Water Raising, De-rusting, Phosphating, Passivation and Water drying. (r) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (s) If mentioned fault and Automatic transfer switch rating is unavailable consider nearby upside rating. t) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (u) Total Discrimination of system shall be checked and required setting shall be made. If any component required to change will change free of cost. The switch-gear & Panel manufacturer (jointly) will submit discrimination check report duly checked and signed on company letter head. (v) Indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site as required. Note: All necessary interfacing shall provide an earmarked terminal boards for SCADA signals as per specification & requrments for each Electrical Panel. Note:- Refer to above General Notes and Specifications for Panels/ Boards follow Item no. 72 To 92.
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-A (GROUND FLOOR) FOR NON-ESSENTIAL LOAD DB-1 BLOCK-A (NON-ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-1 NON-ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) Legrand to be check upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 2 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1, 2 & 3-BLOCK-B GROUND TO THIRD FLOOR FOR NON-ESSENTIAL LOAD. SDB-1, 2 & 3 BLOCK-B (NON-ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Third floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
3
-
-
INCOMER-1 FROM MDB-2 BLOCK-B NON-ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 2 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-E SECOND FLOOR FOR NON-ESSENTIAL LOAD. SDB-1 BLOCK-E (NON-ESSENTIAL PANEL) (Indoor use located at Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-4 BLOCK-D NON-ESSENTIAL PANEL SUPPLY 1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 150 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 5 Nos. 40 Amp 4P MCB 2 Nos. 63 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-A (FIRST FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-A (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-1 BLOCK-A ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 4 Nos. 40 Amp 4P MCB 4 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 2 Nos. 25 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-B ( LOWER GROUND FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-B (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB- BLOCK-B ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB 6 Nos. 32 Amp 4P MCB 2 Nos. 32 Amp DP MCB 2 Nos. 25 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-2 -BLOCK-B ( FIRST & SECOND FLOOR) FOR ESSENTIAL LOAD. SDB-2 BLOCK-B (ESSENTIAL PANEL) (Indoor use located at First floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-2 BLOCK-B ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 1 Nos. 40 Amp 4P MCB 5 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 6 Nos. 25 Amp 4P MCB
-
-
-
Supplying,Receiving, fixing, testing & commissioning of below described SDB-5 -BLOCK-B (THIRD FLOOR) FOR ESSENTIAL LOAD. SDB-3 BLOCK-B (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-2 BLOCK-B ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 1 Nos. 40 Amp 4P MCB 8 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 7 Nos. 25 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1 -BLOCK-C ( LOWER FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 1 Nos. 40 Amp 4P MCB 10 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 2 Nos. 25 Amp 4P MCB
-
-
-
Supplying,Receiving, fixing, testing & commissioning of above described SDB-3-BLOCK-C (THIRD FLOOR) FOR ESSENTIAL LOAD. SDB-3 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 150 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCCB 1 Nos. 40 Amp 4P MCB 3 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-4-BLOCK-C (TERRACE FLOOR OT AHU) FOR ESSENTIAL LOAD. SDB-4 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 4 Nos. 63 Amp 4P MCCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-4-BLOCK-C (SECOND FLOOR) FOR ESSENTIAL LOAD. SDB-2 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. Refer to Cat no. - Trinity-VAF. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 2 Nos. 40 Amp 4P MCB 6 Nos. 25 Amp 4P MCB 3 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-D (FIRST FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-D (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-4 BLOCK-D ESSENTIAL PANEL SUPPLY 1 Nos.200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. Refer to Cat no. - Trinity-VAF. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB 7 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 6 Nos. 25 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-2-BLOCK-D (SECOND FLOOR) FOR ESSENTIAL LOAD. SDB-2 BLOCK-D (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry)..
1
-
-
INCOMER-1 FROM MDB-4 BLOCK-D ESSENTIAL PANEL SUPPLY 1 Nos.200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 4 Nos. 40 Amp 4P MCB 3 Nos. 32 Amp 4P MCB 2 Nos. 32 Amp DP MCB 4 Nos. 25 Amp 4P MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described SDB-3 -BLOCK-E (Second FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-E (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER-1 FROM MDB-5 BLOCK-E ESSENTIAL PANEL SUPPLY 1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCCB 1 Nos. 40 Amp 4P MCB 8 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB
-
-
-
Supplying, Receiving, fixing, testing & commissioning of below described Panel LIFT PANEL (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry). INCOMER 1 No. 160A TPN MCCB METERING & INDICATION 1 set of R,Y,B phase indicating lamps 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's BUS-BAR 1 Set of 250A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 5 Nos. 63A 4P MCCB .
1
-
-
LIFT DB (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry). INCOMER 1 No. 63A TPN MCCB+ELCB METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 2 Nos. 40A TPN MCB . 2 Nos. 32A TPN MCB . 4 Nos. 16A SP MCB . 4 Nos. 10A SP MCB .
3
-
-
(BOQ Schedule 'A' Part-XX). FIRE FIGHTING SYSTEM
-
-
-
Supply and fix Mild Steel class 'C' diesel pump exhaust pipe 150mm dia with one layer of 25mm thick asbestos rope insulation and including all fitting clamp/ structural steel supports complete all as specified and as directed.
20
-
-
Supply and fix Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and as directed.
2
-
-
Supply, instalation, testing & commissioning of Strainer 300mm dia for suction made from MS body with bottom and top removable flanges with nuts, bolts etc complete all as specified and as directed.
2
-
-
Supply, Installation, testing and commissioning of resilient rubber lined single arch Vibration eliminators suitable for raw water up to 45 C temperature, working pressure 10.0 kg/cm2 and test pressure 20 kg/cm2 for 200mm dia pipe complete all as specified and as directed.
3
-
-
All as per item no. 68 above but 150 mm dia pipe
3
-
-
All as per item no. 68 above but 65 mm dia pipe
2
-
-
All as per item no. 68 above but 50 mm dia pipe
2
-
-
SPRINKLER & ITS PIPING (FIRE FIGHTING SYSTEM)
-
-
-
Supply and fixing 25 mm dia inspection & testing assembly with gun metal Gate valve, gun metal sight glass, drain valve (Ball valve 50mm dia) & connection to drain. complete all as specified and as directed.
34
-
-
FIRE DETECTION & ALARM SYSTEM)
-
-
-
Supplying and Fixing FRLS insulated copper conductor, 2 core, 1.50 sqmm in existing steel conmduits all as specifed & as directed by Engineer-in-Charge.
16500
-
-
Supplying and fixing of 25 mm dia. 1.6 mm thick ISI Mark M.S. conduit as per IS:9537 Part-3 along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit
14000
-
-
Supply, Installation , Testing and Commissioning of Network Repeater Panel with minimum 10" Color Touch Screen display with QWERTY Keypad, mapping minimum 2,00,000 points on network. The NRP shall act as an independent node communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation UL & FM Approved complete all as specified & as directed by Engineer-in-Charge.
1
-
-
Supply, installation, testing and commissioning of fire alarm control panel complying with BS EN54 & Vds 12 Loop panel with 250 detectors/Device (Detector & Device should be in any combination) should be expandable upto 20 Loops. (a) Loop length should be 1.6 KM (b) 7' color screen touch display (c) 10000 log history (d) Minimum 3 Ethernet port (2 for networking, 1 gor 3rd party integration) (e) Minimum 2 no of Rs 485 port (f) 24 hrs back-up with 24 volt sealed maintainence free batteries with automatic charger 30 mil backup during alarm condition. (g) OPC / Modbus should be inbuilt for BMS integration. (h) Controller should be 100% rebundant (j) With GSM dialer to message / call minimum 5 number
5
-
-
Supply, installation, testing and commissioning of Detectors complying with and type certified to EN-54 & Vds Addressable type heat detector with inbuilt isolator or with isolator base with rate of rise cum fixed temperature as per IS 2175. All required accessories like KB box, glands and etc should be part of proposal.
15
-
-
Supply, installation, testing and commissioning of Detectors complying with and type certified to EN-54 & Vds Addressable type multisensor detector with heat and smoke combination with inbuilt isolator base. All required accessories like JB box, glands and etc should be part of proposal - (above false ceiling).
744
-
-
Supply, installation, testing and commissioning of Detectors complying with and type certified to EN-54 & Vds Addressable type multisensor detector with heat and smoke combination with inbuilt isolator base. All required accessories like JB box, glands and etc should be part of proposal - (below false ceiling).
906
-
-
Supply, installation, testing and commissioning of Loop powered sounder um strobe, inbuilt isolator as per NFPA 72 (a) Minimum 24 different tone. (b) shall be loop powered (No extra power supply, cable or control module should be required) (c) Minimum 4 sound level (d) Sound pressure should be upto 92 dB.
49
-
-
S & F of addressable monitor module shall be EN-54 clarified
49
-
-
S & F remote response indicators shall be EN-54 clarified
758
-
-
S & F Addressable control module shall be EN-54 clarified
20
-
-
S & F Addressable monitor module shall be EN-54 clarified
15
-
-
S&F short circuit isolator EN 54 certified
25
-
-
Supply, installation, testing and commissioning of Microprocessor based addressable flush fitting detector / Invisible detector for smoke, optical component, for flush fitting in steel - reinforced concrete ceiling or suspended ceilings, protection against external light in accordance with EN54-7, Chamber integrity monitoring, optical fault display, self monitoring of sensors, programmable for timed automatic sensitivity selections with Junction Box and other accessories as required. the detector shall be EN-54 Approved - operation theaters ICU. If flush fitting / flat surface detector not available than bidder to quote SITC of Aspiration system for OT Room size (12ft x 12 Ft) with single pipe system. Aspiration pite to be considered 110 mtr. Adjustable sensitivity of up to 0.05% / m light observation. Monitoring of pipe for breakage and obstruction. All ASD should be connected with each other, with all required accessories for aspiration detection.
12
-
-
Supply, installation, testing and commissioning of addressable automatic fire detector for monitoring of ventilation ducts which can perform alarm pattern analysis, with even response sensitivity for all fires with smoke development with inbuilt isolators as per NFPA 72 style 7 wiring requirements & special housing for accommodating the detector, such that the trigger display remains visible after installations, having features of contamination detection, detector remote inquiry, Self-monitoring, automatic addressing, Additional manual addressing for the use of existing networks with stub branches, Integrated isolators at input and output so that all elements in the loop maintain operational availability, even is there is a short circuit (Detectors without inbuilt isolators may be considered with an additional isolator Module per detector)
10
-
-
(i) Suction header for fire fighting :- M&L for fabrication of header made out of heavy duly MS Pipe 300 mm dia not less than 12 mm thick and not less than 10 mtr long duly painted and welded on both sides with suitable holes – 07 Nos of size two 250 mm dia (incoming) and 5 Nos outgoing (150 mm dia 3 Nos, 65 mm dia 02 Nos). Job includes welding 02 Nos, 250 mm dia, 3 Nos, 150 mm dia 02 Nos 65 mm dia MS pipe 600 mm long, heavy grade at one end and other end duly welded with MS flange having thickness not less than 10 mm, duly holes drilled matching with sluice valve flange 250 mm, 150m and 65 mm dia all as directed by Engr-in-Charge.
1
-
-
(ii) Delivery header for fire fighting :- M&L for fabrication of header made of heavy duty MS pipe 250 mm dia not less than 12 mm thick and not less than 10 mtr long duly painted and welded on both sides with suitable holes – 10 Nos of size three 150 mm (incoming), 04 Nos 80 mm dia (incoming) 03 Nos 150 mm dia (outgoing) Job included welding 6 Nos 150 mm dia, 04 Nos 80 mm dia MS pipe 600 mm long, heavy grade at one end and other end duly welded with MS flange having thicjness not less than 10 mm / duly holes drilled matching with sluice valve flange, 150 mm 80 mm all as directed by Engr-in-Charge.
1
-
-
FIRE FIGHTING SYSTEM (ELECTRICAL PANEL)
-
-
-
Supplying, fixing, testing & commissioning of FIRE FIGHTING PANEL (Indoor) use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry / Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry.
1
-
-
Incomer :- 1 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L, S/C & E/F) of fault breaking capacity 35 KA (Ics = Icu=100%) upto 415 V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides MCCB shall conforming to IS-1397-2 1993 as amended METERING, INDICATOR AND RELAYs :- PROVIDE 3 NOs. Resin cast CTs, Class -1.0 and MFM True RMS type digital with min. features of measurements A,V, Hz and RS-485 port for BMS with class -1.0 accuracy for all outgoing feeder. Refer to Cat No. Trinity – VAF. E-Series R,Y,B phase indication lamps with 4 Nos. SP HRC fuses as per fault requirement for each incomer.
-
-
-
OUTGOINGS:- NOTE :- All Starters shall be High Performance Star Delta / DOL Motor Starters as specified (Type 2 Co-ordination with MPCB / MCCB at 415 V as specified in BOQ) Type 2 Co-ordination selection shall be in consideration of that the jockey pump motor should be minimum IE3 efficiency and rest other motors shall be of IE2 efficiency. 1 Set of TP MCCB (Motor duty) of 35 kA with thermal over load relay each for 60 HP Star-Delta motor starter type II co-ordination alongwith 3 Nos. TP power contactors (AC 3 Duty) with inbuilt 2NO + 2NC contract and necessary additional potential free auxiliary contractor, CT operated digital Ammeter with selector switch, Red, Green & Yellow indicating Lamps each with control SP MCBs , Start / Stop Push buttons, Auto / Manual / Off selector switch, Timer, 230 Vac, 0-30 second and SPP complete as required, for 1 Nos. Main Fire Pumps 1 Set of TP MCCB (Motor duty) of 35 kA with thermal over load relay each for 75HP Star-Delta motor starter type-II co-ordination along with 3 Nos. TP power contactors (AC 3 Duty) with inbuilt 2 NO + 2NC contact and necessary additional potential free auxiliary contractor CT operated digital Ammeter with selector switch, Red, Green & Yellow Indicating Lamps each with control SP HRC fuses, Start/Stop Push buttons, Auto / Manual /Off selector switch, Timer, 230 Vac, 0-30 second and SPP complete as required, for 1 Nos. Main Hydrand 1 Set of TP MPCB of 50 KA with Thermal over load relay each for 30 HP Star-Delta motor starter type-II co-ordination along with 3 Nos. TP power contractors (AC3 Duty) with inbuilt 1NO + 1 NC contact with necessary additional potential free auxiliary contractor. CT operated digital ammeter with selector switch, Red, Green & Yellow indicating Lamps each with control SP HRC Fuses, Start / Stop Push buttons, Auto / Manual / Off selector switch, Timber, 230 Vac, 0-30 Second and SPP complete as required, for 1 Nos. Water curtain Pump 2 Set of TP MPCB of 50 KA with Thermal over load relay each for 7.5 HP DOL motor starter type-II co-ordination along with TP power contactors (AC3Duty) with inbuilt 1 NO+1NC contract with necessary additional potential free auxiliary contractor, CT operated digital Ammeter with selector switch, Red, Green & Yellow indicating Lamps each with control SP HRC Fuses, Start / Stop Push buttons, Auto / Manual / off selector switch, timer, 230 Vac, 0-30 Second and SPP complete as required, for 2 Nos Jockey Pumps. Provide fully automatic Diesel Engine Starting panel complete with battery charger, Hooter, Anuncitor window, Transformer, Rectifier, Ammeter, Voltmeter, push butten, relay, in side panel including control wirings etc. complete as required.
-
-
-
Note :- CABLE CONNECTION Following provisions to be made in the fire panel :- Audio visual alarm & indications having disconnect / reset facility with a range of ½ km. Annunciator to be provided in the fire panel with hooter and acknowledge, test and reset P Bs. The indication shall come on when electrical diven pump set fails to start on pressure drop or when there is power failure during pressure drop. Facility for mode selection i.e auto or manual test & local / remote. Protection failure & control cabing. Panel shall be interlocked in such a way when fire pump starts on pressure drop in the header, supply to working chiler A/c plant is disconnected. Remote indication of ON / OFF/ TRIP shall be provided through potential free contact. Provision of remote starting / stopping (manuals) of the engine shall be made. Note :- All pumps operation shall be controlled by flow switches. The logic of control panel based on specification attached. All pumps shall be works automatically or manually. 5 Amp power required for diesel engine pump from main fire fighting panel. (panel starter shall be based on pumps motor rating if any changes in motor rating the starter rating shall change and fabrication shall start only after approval of drawing).
-
-
-
Provide 3 Nos indicating lamps for status indication “ON” “OFF”, Tripped due to earth fault on each incomer . TVSS AND BUS BARS: - 600 AMPS TP+N, 50KA, 500 Volts grade bus bar chamber of suitable length with Aluminum busbars mount on SMC supports. All interconnections shall be with FRLS PVC insulated copper flexible colour coded wires, current density of bus-bars shall not be less than 1 Amps / sq.mm for Aluminum and 2 Amps / Sq.mm for copper cross sectional area of Bus Bar.
-
-
-
M & L Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.30mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified.
NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
42
-
-
M & L Earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including copper strip of size 20 x 3 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified. NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
20
-
-
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.30mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI wire of size 4 mm by means of bolts, nuts, check nuts and washers of GI. 15 mm bore GI pipe light grade for protection of GI wire from earth plate to testing point for protection, 20mm bore GI pipe medium grade for water with wire mesh and funnel for watering including necessary excavation and earth work, PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified.
NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50 m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item. (iv) The earth chamber shall be constructed 5 m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate quoted for this item.
38
-
-
Supply and fix double compression steel gland for fixing armoured cable in panel of size 2 core 6 Sq mm to 16 sq mm size.
60
-
-
Description all as Sl Item No 97 but for cable of size 4 core 6 to 16 sq mm
110
-
-
Description all as Sl Item No 97 but for cable of size 4 core 25 to 35 sq mm.
18
-
-
Description all as Sl Item No 97 but for cable of size 3½ core 50 sq mm to 70 sq mm.
28
-
-
Description all as Sl Item No 97 but for cable of size 3½ core 95 sq mm to 120 sq mm.
22
-
-
Description all as Sl Item No 97 but for cable of size 3½ core 150 sq mm.
16
-
-
Description all as Sl Item No 97 but for cable of size 3½ core 240 sq mm to 300 sq mm.
86
-
-
Supplying, fixing hot dipped GI ladder type cable tray with 60mm collar including grouting / anchor fastener supports from wall/ceiling etc for the following:-
-
-
-
(i) 450mm tray, 2mm thick, (75X15X2 side channel) (rung-35X15X2mm)
150
-
-
(ii) 600mm tray, 2mm thick, (75X20X2 side channel) (rung-35X15X2mm)
180
-
-
(iii) 900mm tray, 2.5mm thick, (100X20X2.5 side channel) (rung-40X15X2.5mm)
250
-
-
Supply, installation, testing and commissioning of LED Gate Light 20-22W with spun aluminium white power coated top cover and seamless GI pipe bottom housing for control gear. Luminaire to be provided with base plate and fixing holes for directly mounting on the concrete pedestal. Power factor of greater PF0.95 THD 10% & ingress protection IP65 to be provided.
8
-
-
M&L for Junction Box of polycarbonate body top hinged including 3 phase and neutral aluminium bus bar of suitable capacity (280 x170 x130 mm) with hinges and locking arrangement MS clamp made of 40 x 3mm flat having aluminium bus bar (2 Nos) an MCB SPN for ON/OFF control of street light complete in all respect including 2 nos. gi pipe 1.5" dia having 1 mtr. length each and chuck nut for cable connection etc. as per direction of E/I.
90
-
-
M & L Wiring with 3x1.5 sq. mm. PVC insulated copper conductor 1100 V grade wires in existing pole including connecting at the lighting fixtures complete.
900
-
-
(BOQ Schedule 'A' Part-XXI). EXTERNAL ELECTRIFICATION. Supplying, fixing, testing & commissioning of Main LT Panel as described below. Main LT Panel Non-Essential (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to Sub-Station at various locations, handling, assembling, installation in correct aligned position, making proper connections, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of the following Modular cubical type construction, Electrical Panels up to 450Volts ±10%, 3Phase, 4Wire, 50Hz ±6%, are housed in CRCA Sheet bolted cubicle made up of 3.15mm for non-stress members & 2.0mm for all stress bearing members and 3.15mm for Removable Glad Plate & base Frame Meterial, unless specified otherwise, vermin proof hinged lockable doors & door earthed for each compartment provide bus bar interconnections for incoming and outgoing, Single front compartmentalized, totally enclosed, free standing, Floor / Wall mounted type as case may, indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site. . The Bus bars will be Copper purity 99.9% / electrolytic grade E91 Aluminium duly sleeved with Helogen Free heat shrink coloured Insulated tube (make-GALA or Eq.) confirms to RoHS & IEC 6068-3-247 Standard. Provide electrical insulating shrouds, reusable type covers for busbars Boots on corners Panels will be painted with Powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB/MCCB.
-
-
-
INCOMER:-1, 2 & 3 FROM TRANSFORMER:- 3 No.1000 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw 100% upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. BUS - COUPLER:- 2 No. 1000Amps 4P EDO type Air circuit breaker without protection release of fault breaking capacity 50KA (Ics=Icu=Icw 100% upto 433V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB, terminals suitable for Bus bar connections on both sides.
-
-
-
METERING, INDICATOR AND RELAYs:- E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 4Nos indicating lamps on each ACB for status indication "ON","OFF", tripped Due to Earth fault & Trip circuit healty and true operation counter for all ACB. 'ON/OFF/TRIP Due to E/F or ELR' Indication lamps each with MCB/HRC fuses for each outgoing and buscoupler. All ACBs incomer and outgoing in main LT panel shall surely be provided with zone selective interlocking. The releases shall be suitable to communicate between incomer breaker and outgoing breakers enabling zone selective interlocking. The manufacturer shall supply all equipment like ZSI module, power supply and wiring connectors to implement ZSI.It shall be provided only when ACB is an incomer and atlest one ACB outgoing is used. Wherever 4 Pole ACBs used, it shall have fully rated neutral equal to rating of the breaker & shall be protected against over-load faults with provisions for settings neutral unprotected, neutral protection at 0.5In and neutral protection at 1.0 In to ensure precise neutral protection. Provide seprate 3Nos. Dual ratio dual tape Resin cast CTs, Class-1, in each transformer Incoming for single to capacitor panel APFCR. CT-Operated Enersol make- MFR-4810 Multi Function Panel mounted Meter - (96 mm x 96 mm) covering Load Manager MF 48 with Import/Export & RS485 port all electric basic, Power & Energy parameters 4 quadrant including THD% V& A phasewise for all incommers with class - 1.0 accuracy. CT-Operated Enersol make- MF-4210 Multi Function Panel mounted Meter - (96 mm x 96 mm) covering Load Manager MF 42 without RS 485 Port , All electric basic, Power & Energy parameters including THD% V& A phasewise for all outgoing with class-1.0 accuracy.
-
-
-
TVSS & BUS BARS SECTIONS:- 1500Amps TP+N, 50kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1 Amps/sq.mm for Aluminium and 2 Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS CONNECTED AS SHOWN IN SLD:- 2 No.800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. 2 Nos. 630A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
8 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 Nos. 315A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 250A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended
-
-
-
4 Nos. 160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 2 Nos. 125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 Nos. 100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 No Surge protection device Type 1 ( Class B), 4 Mode , connected between each phase to neutral & neutral to earth.Impulse Current Iimp 40KA per Phase ( 10/ 350µs) . SPD with 100A 4P Control MCB/ MCCB all necessary accessories and wire connections with each busbar Earth leakage protection relay with 300mA to 3000mA with ZCT for each outgoing MCCB. Including Electrical & Mechanical interlocking between each Incomers and buscouplers as shown in SLD, Auto D.G. selection and Start/Stop, Load management including PLC Expansion Module, Sheild wire, NC01 cable, PLC restart/refreash, Power Supplies, arrangement Nesecarry arrangments, Softwere and Hardwares need to be provided for interlocking. 1KVA online UPS with minimum 15 minutes backup, built in battery for PLC system.
-
-
-
General Notes for site visit report for Panels/ Rising Main before submitting GA. The Manufacturer must visit the site before submitting GA drawings and submit a report consisting following: (a) Possible height for Panel. (b) Possible width for Panel. (c) Back access will be possible or not. (d) Cable entry will be from top or bottom. (e) If entry from bottom whether MS. Stand is required or not. (f) If the panel is wall mounted whether the wall is available or not.(g) Path for movement of transportation of panel is possible or not i.e length, width etc. and the transportation sections shall be designed accordingly. (h) Sufficient space available at front & back after door opening. (i) Sufficient height available above panel for cable drop. (j) Actual floor to floor height for rising mains. Also, refer to General Notes and Specifications for Panels/ Boards. (a) Contractor to submit manufacturer's selection charts, Discrimination check certificate, insulation material & corners cover on bus-bars for approval. (b) If mentioned fault rating of bus-bar and circuit breaker is unavailable consider next available upside rating. (c) Mimic diagram shall be provided on all panels. (d) It is recommonded that only one make of switchgear to be used in a board / Panel. (e) All live accessible parts shall be shrouded and all equipment shall be finger touch proof. SMC shrouds busbar supports shall be used. Padlocking facility shall be provided on all MCCB feeders doors and switch handles shall be locakble in OFF position. (f) Equipments will be offered for following routine test only:- i). Check of Bill of Materials as per approved drawing, ii). Visual and Dimensional Check, iii) Functional Check, iv) HV/Megger test as per relevant IS. v) Type tests from CPRI of any two panels as choice of electrical consultant.
-
-
-
(g) Minimum/Maximum Operating height:- 300/1800 respectively. (h) Sealing Arrangement:- PE Foam Rubber Gasket. (i) Bus Bars Supports:- Non-Hygroscopic, Non Carbonising, Corrosinn Resistant, SMC Supports. (j) 1 Set of connector (Phase+Neutral) shall be provided in cable alley for all outgoing with interconnection wires between MCB and Connector. (k) All floor mounted electrical panel shall have a common hot dip G.I. earth bar of size minimum 32mm x 6mm at the rear and wall mounted panel with earth stud at bottom both side. Electrical panels incomer above 35kA shall have a common hot dip Aluminium earth bar of size minimum 50mm x 6mm at the rear in bottom. (l) Bottom base channel of floor standing panel shall be made of M.S. angle iron, not less than 50mm x 50mm x 5mm thick for panel overall height upto 1800mm and above in height 75mm x 75mm x 6mm thick, fabrication shall be done in transportable sections. Similarly, All outdoor use panel shall have bottom base stand of minimum 450mm M.S. angle iron 32mmx 32mmx6mm with fixing arrangement in RCC foundation. (m) No derating shall be applicable upto ambient temp. 50ºC for all breakers and selected components. (n) Each door other than bus bar section shall be 2 numbers wing knob cabinet cam lock with master key lock made of zinc alloy powder coated housing, handle and chrome plated cylinder and nut CL001. (o) Minimum Air Clearances between bus bars; (Calculation with required supporting document shall be submitted by Panel manufecturer along with GA diagram). P-P=32mm, P-N=32mm,P-E=26mm and N-E=26mm. (p) Panel Power and control Wiring all FRLS PVC insulated. AC voltage circuit-1.5 sqmm Red,Yellow,Blue &Black Current circuit-1.5 sqmm Red,Yellow,Blue &Black AC Control circuit-1.5 sqmm White for Phase & Black for Neutral DC Control circuit-2.5 sqmm Grey Power circuit- Red,Yellow, Blue for Phase & Black for Neutral
-
-
-
Labelling:- Computerised Laminated Aluminium Name Plate with White letters on Blue/Black Background For Each Feeder and Panel Itself. (q) The treatment of Panel Shall be Fully automatic 9-tank process for metal treatment which consists of Solvent/ Alkaline Degreasing, Activation, Water Raising, De-rusting, Phosphating, Passivation and Water drying. (r) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (s) If mentioned fault and Automatic transfer switch rating is unavailable consider nearby upside rating. (t) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (u) Total Discrimination of system shall be checked and required setting shall be made. If any component required to change will change free of cost. The switch-gear & Panel manufacturer (jointly) will submit discrimination check report duly checked and signed on company letter head. (v) Indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site as required. Note: All necessary interfacing shall provide an earmarked terminal boards for SCADA signals as per specification & requrments for each Electrical Panel. Note:- Refer to above General Notes and Specifications for Panels/ Boards follow Item no. 38 To 58.
-
-
-
Supplying, fixing, testing & commissioning of AMF PANEL Cum Emergency Panel as described below. Main LT Panel Essential (Indoor use located at Service Building on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER D.G. SET - 1&2 500 kVA . INCOMER LT PANEL NON-ESSENTIAL BUS SECTION-I&II 2 No. 800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. 1 Nos. 630A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 No. 800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides.
-
-
-
2 No. 800A 4P, AC1 duty, Power Contactor with wide band coils and with minimum 2NO+2NC contact placed after incomer circuit breaker. Start/Stop illuminated push buttons, Auto/Manual/off selector switch 2P/2W+OFF, ON/OFF/TRIP indicator, Timer each backed up with HRC fuses provide on each power contactor. . INCOMER D.G. SET - 3 200 kVA . INCOMER LT PANEL NON-ESSENTIAL BUS SECTION-III . 1 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 Nos. 250A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 Nos. 400A 4P, AC1 duty, Power Contactor with wide band coils and with minimum 2NO+2NC contact placed after incomer circuit breaker if provided. Start/Stop illuminated push buttons, Auto/Manual/off selector switch 2P/2W+OFF, ON/OFF/TRIP indicator, Timer each backed up with HRC fuses provide on each power contactor.
-
-
-
BUS - COUPLER 1 No. 800Amps 4P EDO type Air circuit breaker without protection release of fault breaking capacity 50KA (Ics=Icu=Icw upto 433V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB, terminals suitable for Bus bar connections on both sides. 1 No. 400Amps 4P MCCB circuit breaker without protection release of fault breaking capacity 50KA (Ics=Icu=Icw upto 433V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB, terminals suitable for Bus bar connections on both sides. METERING, INDICATOR AND RELAYs . E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Electrical & mechnically Interlocking between all incomers and bus coupler (if) in such a way two different source supply are not pallel at one time.
-
-
-
AMF/Cranking & Auxilary Relay micro-controller based unit 3P4W to automatic generator start/stop, Three Phase montoring & measures for A,V&Hz and LCD displays 20 x 4 Line. Password protected programmable parameters and stored in a non volatile memory for information is retained in the event of complete loss of battery power. AMF can be operated in "AUTO","QAUTO" (Quick Auto) or "MANUAL" mode. The unit shall features a non-erasable incremental "DG run hour" and "maintenance hour. The "CT ratio" should site selectable. Self powered by a wide input (9-36VDC) power supply and ON/OFF delay site configurable timers. include with 3Nos. Resin cast CTs, Class-1. Provide control accessories like automatically controlled constant voltage constant current, 24/12 V DC battery charger with battery charging indication, battery charged indication, Over charged battery protection, low battery protection, High Voltage protection, charger on - AC, DC Ammeter, DC Voltmeter, 8 window fault annunciater with inbuilt P.B and Hooter, trip alarm and reset etc. for each D.G. Set incomer. TVSS & BUSBARS SECTIONS:- 1200 Amps TP+N, 50kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible wire b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1 Amps/sq.mm for Aluminium and 2 Amps/sq.mm for copper cross sectional area of Bus Bar.
-
-
-
OUTGOINGS 2 No. 800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. 1 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 Nos. 315A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 250A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended
-
-
-
3 Nos. 200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 2 Nos. 100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 No Surge protection device Type 1 ( Class B), 4 Mode , connected between each phase to neutral & neutral to earth.Impulse Current Iimp 40KA per Phase ( 10/ 350µs) . SPD with 100A 4P Control MCB/ MCCB all necessary accessories and wire connections with each busbar
-
-
-
PLC FOR INTERLOCKING, & LOAD MANAGEMENT PLC based Automatic / Manual Synchronisation and check synchronising Panel with auto and manual operation and Load Manager for both Mains and DG power, whose function will be to determine the Load, decide how many DG sets to be synchronised, perform Synchronisation and supply power to the load. Supplier to submit the Bill of materials for the above functions also provide motorised potential meter for each generator for voltage correction. Including Electrical & Mechanical interlocking between each Incomers and buscouplers as shown in SLD, Auto D.G. selection and Start/Stop, Load management including PLC Expansion Module, Sheild wire, NC01 cable, PLC restart/refreash, Power Supplies, arrangement Nesecarry arrangments, Softwere and Hardwares need to be provided for interlocking. 1kVA online UPS with minimum 15 minutes backup, built in battery for PLC system.
-
-
-
Supplying, fixing, testing & commissioning of capacitor Panel-1, 2 & 3 as described below.
3
-
-
Capacitor Panel-1, 2 & 3 (200 kVAR) Capacitor Panel (Indoor use located at Service Building on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry). INCOMER 1 Nos. 200 A TP+NL MCCB , 25kA METERING & INDICATION . (i) 1 set of phase indicating lamps (ii) 1 No. Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232 C port. Controller should mounted on the front side of the panel. BUS-BAR 1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS (i) 2 Nos.of 100A TP MCCB with suitable AC -3 duty contactor (ii) 2 Nos.of 63A TP MCB with suitable AC -3 duty contactor (iii) 4 Nos.of 40A TP MCCB with suitable AC -3 duty contactor (iv) 2 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly. (v) 2 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly. (vi) 4 Nos. 12.5 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
-
-
-
Note:The capacitor panel shall also stipulate the following (i) All the capacitors shall be suitable for 525 V (ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided. (iii) Heavy duty exhaust fans to be provided for cooling (iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging or leading. (v) The APFC shall be protected from following * over-voltage & voltage unbalance * Over temperature-system should be in standby mode and automatically restart after above condition restored. * Total Harmonic Distortion
-
-
-
Supplying, fixing, testing & commissioning of MDB-1 (FOR NON-ESSENTIAL) as described below. MDB-1 BLOCK-A (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
4 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos. 63 A TP+NL MCB . 1 Nos. 40 A TP+NL MCB .
-
-
-
Supplying, fixing, testing & commissioning of MDB-2 BLOCK-B (FOR NON-ESSENTIAL) as described below. MDB-2 BLOCK-B (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.315 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 3 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
4 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos. 40 A TP+NL MCB.
-
-
-
Supplying, fixing, testing & commissioning of MDB-3 BLOCK-C (FOR NON-ESSENTIAL) as described below. MDB-3 BLOCK-C (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar.. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories.
-
-
-
OUTGOINGS 4 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB. 1 Nos. 40 A TP+NL MCB.
-
-
-
Supplying, fixing, testing & commissioning of MDB-4 BLOCK-D (FOR NON-ESSENTIAL) as described below. MDB-4 BLOCK-D (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
1 Nos. 63A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 16KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos. 40 A TP+NL MCB.
-
-
-
Supplying, fixing, testing & commissioning of MDB-5 BLOCK-E (FOR NON-ESSENTIAL) as described below. MDB-5 BLOCK-E (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.250 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 400 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 5 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB. 1 Nos. 40 A TP+NL MCB.
-
-
-
Supplying, fixing, testing & commissioning MDB-1 BLOCK-A (FOR ESSENTIAL SUPPLY) as described below. MDB-1 BLOCK-A (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.250 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 400 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB.
-
-
-
Supplying, fixing, testing & commissioning of MDB-2 BLOCK-B (FOR ESSENTIAL SUPPLY) as described below. MDB-2 BLOCK-B (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.315 A TP+NL , 35kA, MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 3 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 3 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB.
-
-
-
Supplying, fixing, testing & commissioning of MDB-3 BLOCK-C (FOR ESSENTIAL SUPPLY) as described below. MDB-3 BLOCK-C (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos. 315 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 400 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 3 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 2 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB
-
-
-
Supplying, fixing, testing & commissioning of MDB-4 BLOCK-D (FOR ESSENTIAL SUPPLY) as described below. MDB-4 BLOCK-D (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos.315 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 3 Nos.200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB
-
-
-
Supplying, fixing, testing & commissioning of MDB-5 BLOCK-E (FOR ESSENTIAL SUPPLY) as described below. MDB-5 BLOCK-E (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos. 200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
-
-
-
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB
-
-
-
Supplying, fixing, testing & commissioning of PANEL-8 (FOR OTHER ANCILLIARY NON-ESSENTIAL PANEL) as described below. MDB-8 (FOR ANCILLIARY BUILDING NON-ESSENTIAL PANEL) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
1
-
-
INCOMER 1 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories.
-
-
-
OUTGOINGS 2 Nos. 160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 3Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 2Nos.63A TP+NL MCB 1Nos.40A TP+NL MCB
-
-
-
Supplying, fixing, testing & commissioning of FEEDER PANEL-1 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described below. FEEDER PANEL-1 (FOR ANCILLARY BUILDING ) Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 125A TP+NL MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 3 Nos. 63 A TPN MCB. 2 Nos. 40A TPN MCB. 2 Nos. 32A TPN MCB. 2 Nos. 32A DP MCB. 9 Nos. 25A DP MCB.
1
-
-
Supplying, fixing, testing & commissioning of FEEDER PANEL-2 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described blow. FEEDER PANEL-2 (FOR ANCILLARY BUILDING ) Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 160 A TPN MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 250A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 3 Nos. 63 A TPN MCB. 2 Nos. 40A TPN MCB. 2 Nos. 32A TPN MCB. 6 Nos. 32A DP MCB. 4 Nos. 25A DP MCB.
1
-
-
Supplying, fixing, testing & commissioning of FEEDER PANEL-3 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described below. FEEDER PANEL-3 Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 125 A TPN MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 3 Nos. 63 A TPN MCB. 2 Nos. 40A TPN MCB. 3 Nos. 32A DP MCB. 7 Nos. 25A DP MCB.
1
-
-
Supplying, fixing, testing & commissioning of FEEDER PANEL-4 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described below. FEEDER PANEL-4 Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 63A TPN MCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 2 Nos. 32A TPN MCB. 9 Nos. 25A DP MCB.
1
-
-
Supplying, fixing, testing & commissioning of MDB-9 OUTDOOR TYPE (FOR EXTERNAL LIGHTING) as described below. MDB-9 Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 100A TPN MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 250A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 1 Nos. 63 A TPN MCB. 1 Nos. 40A TPN MCB. 5 Nos. 32A TPN MCB.
1
-
-
Supplying, fixing, testing & commissioning of FEEDER PANEL-1&4 EXTERNAL LIGHT (FOR EXTERNAL LIGHTING) as described below. FEEDER PANEL-1 & 4 EXTERNAL LIGHT use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 Nos. 32A TP+NL MCB. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. Refer to Cat no. - Trinity-VAF. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Start/Stop illuminated push buttons, Auto/Manual/off selector switch 2P/2W+OFF, ON/OFF/TRIP indicator, Timer each backed up with HRC fuses provide on each power contactor. TVSS & BUSBARS SECTIONS 4x25x6 SQMM, 415volts grade busbar chamber of suitable length with Copper bus-bars mount on SMC supports current density of bus-bars shall not be less than 2 Amps/sq.mm for copper cross sectional area of Bus Bar. For interconnections provide 3 x 100A tinned copper insulated prong type short links with end cap , 4Nos. neutral bus bar (For three phase & One common), 3Nos earth bar, din bar as required. The cost shall include required minimum 10sqmm copper insulated colour coded interconnection wire set, circuit identification lables & laminated wiring detail chart as standard. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories
2
-
-
OUTGOINGS: 1Nos. 32A DP 'C' Curve MCB with central overload trip mechanism and flag indication with central overload trip mechanism and flag indication of 10kA breaking capacity connected before timer used for Guard Room DB. 3Nos. 32 DP RCCB (30mA) one per phase. 3Nos. 32 DP Power Contactor one per phase each with Auto/Manual selector and self Start/Stop illuminated switch. 1No. 1 Channel yearly programming cycle Astronomical time switches with in- built 5 years battery back up and USB keys. Conform to IEC 60730, Operating voltage : 230V, 50Hz, Hager make-EE181 or Eq. Make. 1No. 2 Channel yearly programming cycle Astronomical time switches with in- built 5 years battery back up and USB keys. Conform to IEC 60730, Operating voltage : 230V, 50Hz, Hager make-EE181 or Eq. Make. 20Nos. 6-32 SP 'C' Curve MCB with central overload trip mechanism and flag indication with central overload trip mechanism and flag indication of 10kA breaking capacity devided equally in per phase or as indicated in Single line diagram. All MCB with central overload trip mechanism and flag indication's shall be mounted on din channel inside closed chambers shall have Acrylic sheet infront and front door should be a glass for see thru.
-
-
-
Supplying, fixing, testing & commissioning of FEEDER PANEL-2&3 EXTERNAL LIGHT (FOR EXTERNAL LIGHTING) as apecified & as directed by Engineer-in-Charge. FEEDER PANEL-2 & 3 EXTERNAL LIGHT use located in external area on Rock or soft Soil as case may be with bottom cable entry.. INCOMER 1 Nos. 32A TP+NL MCB. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. Refer to Cat no. - Trinity-VAF. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Start/Stop illuminated push buttons, Auto/Manual/off selector switch 2P/2W+OFF, ON/OFF/TRIP indicator, Timer each backed up with HRC fuses provide on each power contactor. TVSS & BUSBARS SECTIONS 4x25x6 SQMM, 415volts grade busbar chamber of suitable length with Copper bus-bars mount on SMC supports current density of bus-bars shall not be less than 2 Amps/sq.mm for copper cross sectional area of Bus Bar. For interconnections provide 3 x 100A tinned copper insulated prong type short links with end cap , 4Nos. neutral bus bar (For three phase & One common), 3Nos earth bar, din bar as required. The cost shall include required minimum 10sqmm copper insulated colour coded interconnection wire set, circuit identification lables & laminated wiring detail chart as standard.. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories.
2
-
-
OUTGOINGS: 3Nos. 32 DP RCCB (30mA) one per phase. 3Nos. 32 DP Power Contactor one per phase each with Auto/Manual selector and self Start/Stop illuminated switch. 1No. 1 Channel yearly programming cycle Astronomical time switches with in- built 5 years battery back up and USB keys. Conform to IEC 60730, Operating voltage : 230V, 50Hz, Hager make-EE181 or Eq. Make. 1No. 2 Channel yearly programming cycle Astronomical time switches with in- built 5 years battery back up and USB keys. Conform to IEC 60730, Operating voltage : 230V, 50Hz, Hager make-EE181 or Eq. Make. 20Nos. 6-32 SP 'C' Curve MCB with central overload trip mechanism and flag indication with central overload trip mechanism and flag indication of 10kA breaking capacity devided equally in per phase or as indicated in Single line diagram. All MCB with central overload trip mechanism and flag indication's shall be mounted on din channel inside closed chambers shall have Acrylic sheet infront and front door should be a glass for see thru.
-
-
-
Construction of brick masonry valve pit of size 1.2 x 1.2 x 1.2 m (internal dimension of chamber) with brick work in cement mortar 1:4 including plastering internally and pointing externally as the work proceeds complete with MS sheet cover 3.15mm thick and angle iron frame 40mmX40mmX6mm with handle, locking arangement and painting with two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces including earth work & excavation in any type of soil, disposal of surplus spoil not exceeding 50m concrete etc all as specified and shown on drawing.
14
-
-
Description all as per Item No 129 above but of size 900mm x 900mm x 1050mm.
10
-
-
M&L for Platform brick masonary with surface finshing using extra cement for the installation of transformer of size 3000x2500x1200mm complete with chain link fencing and gate all shown in drawing No. CEPZ/TD/350/08, complete all as specified and directed.
3
-
-
(BOQ Schedule 'A' Part-XXII). EXTERNAL WATER SUPPLY
-
-
-
Supply, laying , jointing and testing of DI (Ductile iron) pipe 80 mm bore spigot and socketed type of class K-9 conforming to IS 8329 of 2000 with inside surface of centrifugally cement mortar lined laid in trenches/ on ground suitable for & including rubber gasket (Push-on) joint and jointing material complete all as specified and diorected.
1040
-
-
Material & labour for fabrication of header made out of heavy duty MS pipe 250 mm dia not less than 12mm thick and not less than 10mtr long duty painted and welded on both sides with suitable holes-07 Nos of siges one 150mm dia (incoming) and 6 Nos (outgoing) (4 Nos 80mm dia, 1 Nos 50mm dia and one Nos 40mm dia). The job includes welding 06 No 80mm, 50mm and 40mm dia MS pipe 600 mm long 'heavy grade at one end and other end duly welded with MS flange having thickness not less than 10mm, duly holes drilled matching with the holes of sluice & Gate valve flange 80mm, 50mm and threaded for 40mm dia and including 6 No MS pipe piece 600 mm ling 80mm, 50mm and threaded for 40mm dia heavy grade welded with MS flange having thickness not less than 10mm duly holes drilled matching with the holes of sluice & gate valve flange 80mm, 50mm and threaded for 40mm dia complete all as directed by Engr-in-charge.
1
-
-
M&L for providing & fixing in position 25mm dia lawn hydrants consisting of 25mm dia Ball valve, GI nipple and threaded hose reeiver complete all as specfied and as directed by Engr-in-charge
4
-
-
Constructions of Brick masonary valve pit of size 90x90x90 Cm (internal dimension of chamber ) with earth work in ant type of soil, PCC M-10 type C-2 as in foundation, bricks work in CM 1:6, 23 cm thick, 15 mm thick plaster in cement mortar 1:4 internally and externally flush pointed in same mortar as the work proceeds. lfooring shall be 40mm thick in PCC M-15 (Nominal Mix) laid over 75mm thick hard core. top cover shall be made out of MS sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking arranagement at other side with 50mm pad lock complete including painting with 2 coat of synthetics paint over one coat of red oxide primer complete all as specified and as shown on drawing all as specified and as directed.
15
-
-
Constructions of Brick masonary valve pit of size 120x120x120 Cm (internal dimension of chamber ) with earth work in ant type of soil, PCC M-10 type C-2 as in foundation, bricks work in CM 1:6, 23 cm thick, 15 mm thick plaster in cement mortar 1:4 internally and externally flush pointed in same mortar as the work proceeds. lfooring shall be 40mm thick in PCC M-15 (Nominal Mix) laid over 75mm thick hard core. top cover shall be made out of MS sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking arranagement at other side with 50mm pad lock complete including painting with 2 coat of synthetics paint over one coat of red oxide primer complete all as specified and as shown on drawing all as specified and as directed.
26
-
-
Supply, installation, testing & commissioning of factory assembled compact self contained fix speed hydropneumatic system comprising of following :- (a) Vertical, Non-self Priming, multistage, inline, centrifugal clear water pumps with cast iron Pump housing, S.S 304 impeller and SS-316 shaft, C.I Base & head, TEFC motor, “F” insulation class, IP55 enclosure class, 2900 RM (With mechanical seal) Vendor to submit performance curves and technical catelogue of the proposed model for review and information.
(b) Food Graded Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts / bolts etc. complete (size of pressure vessel shall be of suitable capacity or as per manufacturer calculation / recommendation) with electrical panel. (c) Panel mounted microprocessor PID controller with pressure sensor transmitter (one dedicated to each pump) minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class -2 protocol through RS 485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection.
(d) Set of accessories such as pressure switches, pressure transducers, valve (butterfly / valve, NRV of PN 16 / PN 10.00 pressure rating) Vibration isolator, GI “heavy class’ suction and delivery header & interconnection piping, level controller, pressure gauge inter connecting power and control cabling etc. complete with vibration eliminators of required quantity.
Flow rate : 2 LPS each Head : 35 Mtr, E.Load 2 KW or as per manufacture required for : domestic water transfer for D-block.
2
-
-
Supply and fix CI Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and as directed by Engr-in-charge.
7
-
-
Supply and fix Strainer Y type conforming to IS, of size 50mm (2") dia complete all as specified and as directed by Engr-in-charge.
1
-
-
Supply and fixing, testing & commission of size 50mm dia resilent rubber lined single arch vibration eliminators suitable for raw water up to 45 C temperature, working pressure 10.0 Kg/cm2 and test pressure 20 Kg/cm2
2
-
-
Supply laying jointing and testing of DI (Ductile iron) pipe of 150 mm dia spigot and socketed type of class K-9 confirming to IS 8329 of 2000 with inside surface of centrifugally cementy mortar lined, laid in trenches/ on ground suitable for & including rubber gasket (Push-on) joint and jointing material complete all as specified and directed.
3320
-
-
M&L for cutting of roads for laying of pipe of any size and type complete all as specified and directed. Repair to road cutting by providing soling with broken boulders or quarried stone and applying cold emulsion mixed with aggregate as per manufacter's instructions including necessary compaction by rolling etc match complete all as specified and directed.
5
-
-
(BOQ Schedule 'A' Part-XXIII). LIGHTENING PROTECTION
-
-
-
M&L of Earthing comlete with Galvanised steel earth plate electrode 60 cmx60 cm x 6.00mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal ad common salt alternatively upto 90 cm and connected with and including GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of GI 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type c-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part-I of SSR Part-I (2009) complete all as specified and directed by Engr-in-charge. NOTE:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item.
(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item
(iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
39
-
-
DG SET
-
-
-
Supply, installation, commissioning and testing of Diesel engine driven Water cooled generating set of capacity 200 kVA, 415 volts, BHP as per manufacture recommendation, AC supply, 50 Hz, 3 phase 4 wire, 0.8 PF at NTP, speed 1500 RPM at Yol mounted on common base frame with flexible coupling and meeting the requirement of IS-4722/BIS specification with CPCB 4 + standard DG set has RECD (Retrofit emission control device), acoustic enclosures fabricated out of CRCA sheets as per manufacture recommendation. Sound proofing of enclosures is done with high quality foam conforming to IS-8183 for 75 dBT 01 metre complete including PCC foundation in all respect as per norms of OEM.
1
-
-
Technical Specification of DG Set - Electric Generating set placing the engine and A.C. Generator on M.S. frame duly bolted, coupled, aligned, tested and housed within the acoustic enclosure complete with the followings: DIESEL ENGINE: Water cooled diesel engine of adequate capacity tp produce power otput of 200KVA at 1500 RPM generally in accordance with latest BIS/IS specification, 12 volts self starting including maintenance free battery of suitable capacity, charging dynamo/ alternator, air cleaner, diesel/ oil filters, complete in all respect. The engine shall be capable of taking 10% over load for one hour for every 12 hours running confirming to the environment (PROTECTION ACT 1986) (29 pf 1986) and as amended vide Gazette of India Notifications Part-II sections-III Sub Section (I) dated 12 Jul 2004. A.C. Generator – Brush less type, Synchronous, A.C. Generators continuously rated for 415 Volts, 3 Phase, 4 Wire, 50 HZ, 1 power factor (lagging) at 1500 RPM, 4 Pole, screen protected, drip proof, horizontal foot-mounted type, self-excited, selfregulated with static excitation system, Class ‘H’ insulation. The Alternator is capable of developing rated output &able to take 10% overload for one hour at every 12 hrs of operation.
-
-
-
ACCESSORIES:
Base Frame : The Diesel Engine and the A. C. Generator will be mounted on a suitable base frame of sturdy to minimize vibration and ensure easy maintenance. Fuel Tank : Daily service fuel tank of sheet metal of suitable capacity complete with drain valve, air vents inlet and outlet connection. Batteries : Battery (Dry and uncharged) of suitable Amp-Hr capacity along with leads for connection. Manually operated Standard Alternator Control Panel fabricated out of sheet steel angle, iron, structure, acid treated for anti-corrosion, floor mounting, cubicle pattern, powder coated dust and, vermin proof, complete with internal wiring and with the followings: • Powder coated control panel manufactured with CRCA sheet provides: • MCCB of suitable rating with short circuit protection • Controller which displays voltage, current, KW, PF, Frequency, KWh. • Indicating lamps for “Load On” and “Set Running” • Current transformers of suitable ratings • Copper Cables of suitable capacity with incoming and Outgoing terminations • Control fuses duly wired and ferruled Technical Specification of Acoustic Enclosure Salient Features: • Approved by ARAI, the nodal agency of CPCB 4 + standards • Compact, modular construction and sleek design with low noise level 75 dBA, at a distance of 1 Meter from Canopy in free field conditions. • Soundproof, weather-proof and environment friendly silent set. • Ready-to-use silent DG Set, which eliminates need of foundation or grouting. • Single bearing generator with Anti vibration mounting ensures minimal vibration. • Steel outer construction with 1.6mm CRCA sheet with heavy-duty fabricated base frame and inbuilt fuel tank. • Attenuators are placed in the hot air outlet and cooling air inlet. • Residential type exhaust silencer is mounted on the enclosure. • Illumination arrangement inside the canopy.
-
-
-
Warranty –(For DG set) : Warranty is for 5 years from the date of completion subject to the use of genuine parts and recommended lube oil and coolant maintenance by authorised person/dealer only. Standard Manual Control panel Illumination Box
-
-
-
Supply, installation, commissioning and testing of Diesel engine driven Water cooled generating set of capacity 500 kVA, 415 volts, BHP as per manufacture recommendation, AC supply, 50 Hz, 3 phase 4 wire, 0.8 PF at NTP, speed 1500 RPM at Yol mounted on common base frame with flexible coupling and meeting the requirement of IS-4722/BIS specification with CPCB 4 + standards, DG set has RECD (Retrofit emission control device), acoustic enclosures fabricated out of CRCA sheets as per manufacture recommendation. Sound proofing of enclosures is done with high quality foam conforming to IS-8183 for 75 dBT 01 metre complete including PCC foundation in all respect as per norms of OEM.
2
-
-
Technical Specification of DG Set - Electric Generating set placing the engine and A.C. Generator on M.S. frame duly bolted, coupled, aligned, tested and housed within the acoustic enclosure complete with the followings: DIESEL ENGINE: Water cooled diesel engine of adequate capacity to produce power output of 500 KVA at 1500 RPM generally in accordance with latest BIS/IS specification, 12 volts self starting including maintenance free battery of suitable capacity, charging dynamo/ alternator, air cleaner, diesel/ oil filters, complete in all respect. The engine shall be capable of taking 10% over load for one hour for every 12 hours running confirming to the environment (PROTECTION ACT 1986) (29 pf 1986) and as amended vide Gazette of India Notifications Part-II sections-III Sub Section (I) dated 12 Jul 2004. A.C. Generator – Brush less type, Synchronous, A.C. Generators continuously rated for 415 Volts, 3 Phase, 4 Wire, 50 HZ, 0.8 power factor (lagging) at 1500 RPM, 4 Pole, screen protected, drip proof, horizontal foot-mounted type, selfexcited, self-regulated with static excitation system, Class ‘H’ insulation. The Alternator is capable of developing rated output &able to take 10% overload for one hour at every 12 hrs of operation. ACCESSORIES:
Base Frame : The Diesel Engine and the A. C. Generator will be mounted on a suitable base frame of sturdy to minimize vibration and ensure easy maintenance. Fuel Tank : Daily service fuel tank of sheet metal of suitable capacity complete with drain valve, air vents inlet and outlet connection. Batteries : Battery (Dry and uncharged) of suitable Amp-Hr capacity along with leads for connection.
-
-
-
Control Panel: Manually operated Standard Alternator Control Panel fabricated out of sheet steel angle, iron, structure, acid treated for anti-corrosion, floor mounting, cubicle pattern, powder coated dust and, vermin proof, complete with internal wiring and with the followings: • Powder coated control panel manufactured with CRCA sheet provides: • MCCB of suitable rating with short circuit protection • Controller which displays voltage, current, KW, PF, Frequency, KWh. • Indicating lamps for “Load On” and “Set Running” • Current transformers of suitable ratings • Copper Cables of suitable capacity with incoming and Outgoing terminations • Control fuses duly wired and ferruled Technical Specification of Acoustic Enclosure • Approved by ARAI, the nodal agency of CPCB 4 + standards • Compact, modular construction and sleek design with low noise level 75 dBA, at a distance of 1 Meter from Canopy in free field conditions. • Soundproof, weather-proof and environment friendly silent set. • Ready-to-use silent DG Set, which eliminates need of foundation or grouting. • Single bearing generator with Anti vibration mounting ensures minimal vibration. • Steel outer construction with 1.6mm CRCA sheet with heavy-duty fabricated base frame and inbuilt fuel tank. • Attenuators are placed in the hot air outlet and cooling air inlet. • Residential type exhaust silencer is mounted on the enclosure. • Illumination arrangement inside the canopy. Terms & Conditions: Warranty –(For DG set) : Warranty is for 5 years from date of supply or the completion of 5000 hrs. Which earlier, subject to the use of genuine parts and recommended lube oil and coolant maintenance by authorised person/dealer only. Standard Manual Control panel Illumination Box
-
-
-
M & L for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.00mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified.
NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
18
-
-
(BOQ Schedule 'A' Part-XXIV). .SUMMER COOLING APPLIANCES
-
-
-
Supply, installation, connecting, testing and commisxsioning of voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designe for input variation between 170V to 250V with output voltage stabilizd 230V with accuracy of +2.5% and of capacity 1.0 KVA specified and directed.
50
-
-
Supply and fix Refrigerator, electric driven (single phase) capacity 260 Ltr BEE, 5 star rated smart inverter complete as per specified and directed by Engr-in-charge.
2
-
-
Supply and fix Refrigerator, electric driven (single phase) capacity 190 Ltr BEE, 5 star rated smart inverter complete as per specified and directed by Engr-in-charge.
23
-
-
S&F electric storage water heater Geysers, 25 ltr capacity, 5 star rating including proper fixing with suitable nuts and bolts and supply with proper PVC connection for incoming and outgoing water connection through geyser complete all as specified and directed.
42
-
-
(BOQ Schedule 'A' Part-XXVI). . AIR CONDITION PLANT (HVAC) (A) INTERNAL
-
-
-
Supply, Installing, testing and commissioning of Double skin construction Air handling Units as per specification. All AHU’s shall be draw thru, complete with filter section, minimum 8/6 row deep (8 row deep for TFA, 6 row deep for all others, unless specified otherwise in BOQ below) chilled water coil of copper tube & aluminum fins, squirrel cage induction motor suitable for use with variable frequency drive, primary & secondary condensate drain pans duly insulated, forward/backward curved, centrifugal fan(s), belt drive, vibration isolators. Fan motor shall be suitable for 415+ 10% volts & confirm to EFF1, 50Hz, 3 phase AC supply and shall have high efficiency motors. AHU shall be selected for a maximum face velocity of 500 FPM across cooling coil and across filters. Minimum thickness of AHU casing shall be 25mm as per specification for ceiling suspended and 43mm for AHU. The CSU’s noise level shall be NC 40 for all the areas.
Air handling capacities
-
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BASEMENT BLOCK C TFA AHU 446 2.4 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE LOWER GROUND FLOOR BLOCK B TFA AHU 2080 11.2 30 1.1 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE GROUND FLOOR BLOCK A TFA AHU 420 2.3 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK B TFA AHU 390 2.1 30 0.37 CS AHU
2
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK C TFA AHU 150 0.8 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 210 1.2 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK D TFA AHU 344 1.8 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 440 2.4 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK E EMERGENCY BEDS 2800 3.6 32 1.1 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 874 4.7 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE FIRST FLOOR BLOCK A DELIVERY SUITE TFA AHU 1407 7.1 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1632 9.2 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK B FAMILY WARD I 4 BED GYNAE 1300 1.6 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE 5 BED GYNAE 1400 1.7 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE 4 BED (M) 1450 1.8 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1000 5.3 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1050 5.6 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK C PAED. OPD TFA AHU 260 1.4 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK D FAMILY WARD II 6 BEDS (M & S) 1320 1.7 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE 6 BEDS (P) 2000 2.6 30 1.1 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE 4 BEDS (P) 1280 1.6 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1180 6.4 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 780 4.2 30 0.37 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK E 6 BEDS-MEDICAL 1525 2.0 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE WARD I TFA AHU 1370 7.4 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA SECOND FLOOR BLOCK A MEDICAL WARD II TFA AHU 190 1.0 30 0.37 CS AHU BLOCK C
1
-
-
OPERATION THEATRE DESCRIPTION CFM TR STATIC MM KW TYPE *PRE OT (6 rows cooling coil & 2 rows 900 1.0 30 0.50 CS AHU heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE *POST OT (6 rows cooling coil & 2 rows 900 1.5 30 0.50 CS AHU heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE STERILE ZONE (6 rows cooling coil 1655 2.7 30 0.50 CS AHU & 2 rows heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE *CLEAN ZONE (6 rows cooling coil & 2 rows 1350 4.6 30 0.10 CS AHU heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU (8 rows cooling coil & 3 750 4.0 28 0.37 CS AHU rows heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK D ACUTE MED 4 BEDS 1500 1.9 30 0.5 CS AHU (6 rows cooling coil & 2 rows heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE ICU * 4 BEDS (6rows cooling coil & 2 rows 2200 2.7 32 1.1 CS AHU heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU (6rows cooling coil & 2 2277 12.2 35 1.5 CS AHU rows heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA TFA AHU (6rows cooling coil & 2 795 4.2 30 0.5 CS AHU rows heating coil)
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA BLOCK E HOSPITAL ADMIN TFA AHU 320 1.7 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA THIRD FLOOR BLOCK B 6 BEDS-SURGICAL WARD I 1650 2.1 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA 6 BEDA-SURGICAL WARD I 1610 2.1 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA 7 BEDS-SURGICAL WARD I 1630 2.1 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA TFA AHU 695 3.7 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA TFA AHU 765 4.1 30 0.5 CS AHU
1
-
-
DESCRIPTION CFM TR STATIC MM KW TYPE TFA BLOCK D TFA AHU 260 1.4 30 0.5 CS AHU
1
-
-
OPERATION THEATER AIR HANDLING UNITS Supply, installation, testing and commissioning of sectionalized construction double skin blow thru type Air Handling Units (AHU kit) for operation theatres. AHU shall comprise of following sections: Modular Double skin Horizontal treated fresh units made of 46+2mm thick PUF insulated panels thermal Break extruded aluminum profiles with 0.8mm thick pre-coated GI Outer Sheet & 0.8mm thick Plain AL inner sheet (a) Supply Air Stream (i) Filter sections consisting of flange type pre filter (MERV-8). Face velocity across filter should not be more than 500FPM. (ii) Coil size shall be selected for air velocity of 500 ft/minute with minimum 8 row deep chilled water cooling coil & 3 row deep hot water heating coil made of not less than 0.41mm thick tube & 12.7mm dia tube. Coil should be tested at 21kg/sq.cm. (iii) Humidifier section with Pan type humidifier (humidifier shall be located externally in the attic space, next to AHU) (iv) Heat Recovery Section with heat recovery wheel of min efficiency 75%. (v) Fan section with plug type SISW Backward Curved High Efficiency EC fans with efficiency complaining to IE3. EC motor should be BLDC motor. With inbuilt speed control. EC motor should be BMS compatible. (vi) Discharge plenum section with MERV-13 filter. (vii) Volume control dampers of extruded aluminum construction in supply, return and exhaust air streams (sized for 100% volume of air). Maximum leakage rate from dampers shall be in accordance with AMCA standard 500 as indicated in Table 6.2.3.3.4 of ASHRAE standard 90-1-2001.
-
-
-
(b) Exhaust Air Stream: (i) Filter sections consisting of flange type pre filter (MERV-8). Face velocity across filter should not be more than 500FPM. (ii) Heat recovery Section with heat recovery wheel. Of min efficiency 75%. (iii) Fan section with plug type SISW Backward Curved High Efficiency EC fans with efficiency complaining to IE3. EC motor should be BLDC motor. With inbuilt speed control. EC motor should be BMS compatible (iv) Volume control dampers of extruded aluminum construction in supply, return and exhaust air streams (sized for 100% volume of air). Maximum leakage rate from dampers shall be in accordance with AMCA standard 500 as indicated in table 6.2.3.3.4 of ASHRAE standard 90-1-2001. (v) Dehumidifier section comprising of molecular sieve desiccant wheel & steam regeneration arrangement. Quoted price shall also include cost of control wiring in 25mm dia MS conduit. Following motorized dampers (including actuators) shall be provided as part of AHJ’s: (i) Motorised damper for 100% fresh air (equivalent to 85% of supply air fan capacity) (ii) Motorised modulating damper for exhaust air (equivalent to exhaust air quantity mentioned for each AHU). (iii) Motorised ON/OFF damper for 100% exhaust air for smoke evacuation (equivalent to return air fan capacity).
-
-
-
Motorised ON/OFF damper for 100% exhaust air for smoke evacuation (equivalent to return air fan capacity). Description CFM TR KW SP POSITIVE WINDOW MINOR OT Supply Air 3070 10.4 19.3 125 Return Air 2763 Fresh Air 3070 exhaust Air 2763 POSITIVE WINDOW OT Supply Air 3700 12.6 23.3 125 Return Air 3330 Fresh Air 3700 exhaust Air 3330 AHU as described above Note: (i) All AHU’s shall be supplied with hydrophilic coating on fins. (ii) Frame-work for coils of all AHU’s shall SS-304 constructions. (iii) Motors for all blowers shall be belt-less type (direct driven) & high efficiency EFF-1 (iv) Efficiency of AHU blowers shall be 65% (v) The steam control values (ON/OFF and modulating type) shall be compatible with BMS and able to accept 4-20
1
-
-
FAN COIL UNITS
-
-
-
Supply, installing, testing and commissioning of vertical, horizontal powder coated Fan Coil Units, Blow thru type, each complete with 3 rows deep chilled water coil & one or more centrifugal fans, aluminium/ synthetic cleanable filters, primary & secondary condensate drain pans duly insulated, casing coil, piping connections through copper pipes, condensate drain connection, wiring, control wiring in conduit upto the thermostat boxes. All fan coil units shall be suitable for 220+ 6% volts, 50 cycles single phase power supply. Fan coil unit shall be of following arrangements and refrigeration capacity. All Fan Coil units shall be with 3 to 5mm wg external static pressure. The nosie level be NC 37 for all rooms.
-
-
-
3.0 TR nominal capacity
8
-
-
3.0 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
1
-
-
2.5 TR nominal capacity
3
-
-
2.5 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
2
-
-
2.0 TR nominal capacity
24
-
-
2.0 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
3
-
-
1.5 TR nominal capacity
54
-
-
1.5 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
7
-
-
1.0 TR nominal capacity
11
-
-
1.0 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
2
-
-
CONTROL PANEL FOR AIR HANDLING UNITS
-
-
-
Supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted control panels. Wiring and earthing terminating into MCCB in each panel shall be provided by the electrical contractor.
All internal wiring and Aluminium earthing of air handling unit motors from the panel shall be included.
All terrace control shall be suitable for outdoor application IP 55/65
The panel shall include the following components and accessories.
a. Suitable rating incoming MCCB/MCB
b. Suitable rating AC-3 duty contractor(s), overload relay with builtin single phasing preventor. Star delta timer (For S/D starters).
c. 96 sq.mm. digital voltmeter, ammeter, selector switches, CTs & control MCBs.
d. Phase indicating lights & control MCBs.
e. Push buttons for manual start/stop of motor.
f. ON status indicating light for starter with control MCB.
g. Minimum 2 pole auto/manual selector switch
h. Time delay relay for delayed restart of motor.
i. 220/24V control transformer for 2 way motorized valve.
j. Interlocking terminals & wiring for fire damper, motorized dampers etc. as per control
k. All panels with more than one outgoing starter feeder shall be provided with separate MCCB/MCB for incoming & outgoing
The number of AHU control panels shall be as follows.
-
-
-
25 amps MPCB, upto 7.5 HP DOL starter.
48
-
-
1 No. 32 amps incoming MCCB, 2 Nos. 25 amps MCCBs and 2 Nos. 5 HP DOL starters, 1No. 25 amps MCB, 40 amps MPCB, 15-20 HP Star Delta starters, 63 Amp MCPB 25 to 30 HP star delta. Note:- The selection contractor and relay shall be done as per Type-2 coordination chart
2
-
-
AXIAL FLOW FANS:Supply, installation, testing and commissioning of Tube/Vane Axial Fans (Fans shall be AMCA certified), complete with TEFC motor, drive and vibration isolators, Motor shall be suitable for 415 + 10% volts, 50 cycles, 3 phase AC supply and shall be High efficiency class EFF1 for all the fans. The fan shall be low RPM and selected for low noise level. Fan capacities based on 30-35 mm WC static pressure, shall be as follows :
Note : Fan installed in open area shall be provided with weather cowl. Cowl shall be molded to cover and overlap the entire fan casing and base support to protect it from adverse condition.
-
-
-
PRESSURIZATION FANS:LOBBY PRESSURIZARION-CFM-4500, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-3
2
-
-
LOBBY PRESSURIZARION-CFM-4600, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-3
1
-
-
LIFTWELL PRESSURIZATION-CFM-12000, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-10
2
-
-
LIFTWELL PRESSURIZATION -CFM-11300, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-10
4
-
-
COOLING/HEATING THERMOSTAT
-
-
-
Supply, installation, testing and commissioning of THERMOSTAT (AHU) cooling/heating. The thermostat shall be electronic room temperature controller with digital display & fan speed control, capable of providing individual space temperature control for cooling/heating application. The controller shall produce output to cooling/heating coils in response to load change in rooms. The controller shall be designed to modulate two control services such as 2 way motorized valves for chilled/hot water duty.
50
-
-
Supply, installation, testing and commissioning of snap acting THERMOSTAT (FCU) cooling/heating. The thermostat shall be electronic room temperature controller with digital display & fan speed control, capable of providing individual space temperature control for cooling/heating application. The controller shall produce output to cooling/heating coils in response to load change in rooms. (Including wiring from thermostat to Actuator).
115
-
-
CONTROL PANELS FOR FANS:Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted control panels, including anchoring into the wall, wiring terminating into MCCB and copper earthing, in each panel shall be provided by the electrical contractor.
All wiring and copper earthing of motors from the panel shall be included. All outgoing shall be provided with stop / manual / auto/ selector switch to facilitate operation through BAS. All starters shall be provided with potential free contact for connections to Building Automation System. The panel shall include the following components & accessories.
(a) Suitable rating incoming MCCB/MCB
(b) Suitable rating AC-3 duty contactor(s), overload relay with builtin single phasing preventor, star delta timer (For S/D starters).
(c) 96 sq. mm. digital voltmeter, ammeter, selector switches, CTs & control MCBs.
(d) Phase indicating lights & control MCBs.
(e) Push buttons for manual start/stop of motor.
(f) ON status indicating light for starter with control MCB.
(g) Minimum 2 pole auto/manual selector switch & 1 NO + 1 NC potential free aux. contacts for use by Building automation system.
(h) Time delay relay for delayed restart of motor
(i) Interlocking terminals & wiring for fire damper, motorized dampers etc. as per control scheme.
The number of control panels shall be as follows
-
-
-
25 amps MPCB, upto 7.5 HP DOL starter.
3
-
-
32 amps MPCB, 10/12.5 HP Star Delta Starters
6
-
-
Supplying, installing, testing and commissioning of Ultrasonic humidifier (For operation theatre air handling units identified below), complete with stainless steel tank with float valve, water makeup, overflow and drain connections. The transducer shall be interlocked with float switch, supplied with humidifier, and humidistat. Necessary potential free contacts shall be provided for BMS operation.
-
-
-
AHU NO-POSITIVE WINDOW MINOR OT, AHU CAPACITY-2550, HUMIDIFER CAPACITY-10 LPH
1
-
-
AHU NO-POSITIVE WINDOW OT, AHU CAPACITY-3700, HUMIDIFER CAPACITY-10 LPH
1
-
-
AHU NO-ICU ROOM, AHU CAPACITY-2500, HUMIDIFER CAPACITY-10 LPH
1
-
-
PIPING-CHILLED WATER, HOT WATER: Supply and fixing in position the following MS heavy class (C) pipes cut to required lengths and installed with all welded joints, providing and fixing in position the necessary fittings like elbows, tees and reducers, mating flanges & sockets for BAS:
-
-
-
200 mm dia
50
-
-
150 mm dia
50
-
-
125 mm dia
580
-
-
100 mm dia
120
-
-
80 mm dia
200
-
-
65 mm dia
325
-
-
50 mm dia
400
-
-
40 mm dia
390
-
-
32 mm dia
580
-
-
25 mm dia
535
-
-
20 mm dia
1330
-
-
Supply, Installation, testing & commissioning of Manual Butterfly valves with matching flangeswith feasibility of changing the inner lining if wornout handles with lockage.Pressure rating - PN-16.
-
-
-
150 mm dia
2
-
-
125 mm dia
4
-
-
100 mm dia
2
-
-
80 mm dia
14
-
-
65 mm dia
6
-
-
50 mm dia
14
-
-
40 mm dia
4
-
-
32 mm dia
21
-
-
25 mm dia
23
-
-
20 mm dia
27
-
-
Supply and fixing the following ball valves without strainer all as specified & as directed by Engineer-in-Charge
-
-
-
25 mm dia
14
-
-
20 mm dia
101
-
-
Supply, installation, testing & commissioning of ball valve with strainer all as specified & as directed by Engineer-in-Charge
-
-
-
32 mm dia
10
-
-
25 mm dia
14
-
-
20 mm dia
101
-
-
Supply, installation, testing & commissioning of Globe Valve all as specified & as directed by Engineer-in-Charge
-
-
-
25 mm dia
14
-
-
20 mm dia
101
-
-
Providing and fixing the following ‘Y’ Strainers in position rating PN-16
-
-
-
50 mm dia
2
-
-
40 mm dia
4
-
-
32 mm dia
11
-
-
25 mm dia
17
-
-
20 mm dia
25
-
-
Supply, installation, testing and commissioning of TWO WAY MODULATING VALVES (AHU) provided with spring return function & fitted with modulating actuators in chilled water return lines at each air handling unit. The actuator shall have required shut off capability of minimum 4 bar rating. The valves & actuators for AHU’s shall be compatible with Building Automation System. The actuator shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Building Automation System. The valve shall be suitable for following pipe sizes and provided with matching flanges and accessories.
-
-
-
65 mm dia
5
-
-
50 mm dia
2
-
-
40 mm dia
4
-
-
32 mm dia
11
-
-
25 mm dia
15
-
-
20 mm dia
18
-
-
Supply, installation, testing and commissioning of pressure independent balancing cum 2 way control valve provided with spring return function in chilled water lines at each fan coil unit. The actuator of the motorized valve shall have required shut off capability of minimum 4 bar rating with 230 V / 24 V transformer duly encased and wired. The valves shall be suitable for following pipe sizes.
-
-
-
25 mm dia
14
-
-
20 mm dia
101
-
-
Supplying, installation, testing and commissioning of 19 mm Auto air vents
16
-
-
Supplying and fixing in position SS 304 the industrial Dial type pressure gauges with gun metal valves.
118
-
-
Providing and fixing in position SS 304 the mercury-in- glass industrial Dial type thermometers.
118
-
-
Providing and fixing in position the Drain- Cock with ball valve 25 mm dia
16
-
-
Providing and fixing in position the following UPVC pipes for drain cut to required lengths and installed with all screwed joints, and providing and fixing in position the necessary elbows, tees and reducers as per specifications.
-
-
-
40 mm dia pipes
450
-
-
32 mm dia pipes
530
-
-
25 mm dia pipes
300
-
-
20 mm dia pipes
655
-
-
Supplying and fixing in position Automatic Balancing valves in position conforming to technical specifications Pressure rating-PN-16:
-
-
-
150 mm dia
2
-
-
125 mm dia
2
-
-
100 mm dia
2
-
-
80 mm dia
2
-
-
65 mm dia
3
-
-
50 mm dia
8
-
-
40 mm dia
4
-
-
32 mm dia
15
-
-
25 mm dia
20
-
-
20 mm dia
27
-
-
Supply, Installation, testing and commissioning of Motorised Butterfly valve (MODULATING) of following sizes with counter flanges and accessories Pressure rating - PN-16
-
-
-
50 mm dia
2
-
-
40 mm dia
4
-
-
32 mm dia
11
-
-
25 mm dia
17
-
-
20 mm dia
25
-
-
AIR DISTRIBUTION
-
-
-
Supply, Fabrication, installation and testing of sheet metal ducts (Factory Fabricated Ducts) in accordance with the approved shop drawings and as required by the specifications.
-
-
-
Maximum Duct Size-1-750 mm Gauge-26, Joint Type- C & S Connector
4300
-
-
Maximum Duct Size-751-1000 mm Gauge-24, Joint Type- TDF Flange.
330
-
-
Maximum Duct Size-1001-1200 mm Gauge-22, Joint Type- TDF Flange, Bracing Spacing-JTR or ZEE BAR
180
-
-
Maximum Duct Size-1201-2100 mm Gauge-20, Joint Type- TDF Flange, Bracing Spacing- JTR or ZEE BAR
440
-
-
Maximum Duct Size-2101-2400 mm Gauge-18, Joint Type- TDF Flange, Bracing Spacing- JTR or ZEE BAR
180
-
-
Maximum Duct Size-2401-above mm Gauge-16, Joint Type- TDF Flange, Bracing Spacing- JTR or ZEE BAR
20
-
-
Supply, fabrication, installation and testing the Flexible connections constructed of fire resistance flexible double canvas sleeve as per the approved shop drawings.
31
-
-
Supply, installation and testing of galvanised steel construction Louver dampers within ducts to be provided with suitable ducts lever and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.as per the approved shop drawings and specifications.
71
-
-
Supply, installation, testing and commissioning of Motorised combined smoke & fire damper complete with control panel, inter connecting wiring at locations shown in approved shop drawings and specifications.
-
-
-
Smoke & Fire Dampers.
5
-
-
Control Panel & Wiring, actuators.
12
-
-
Supply, installation, testing and balancing of powder coated Extruded Aluminium supply Air Grilles with volume control dampers in accordance with the approved shop drawings and specifications. With horizontal fixed bars.
37
-
-
Supply, installation, testing and balancing of Air Grilles without volume control dampers for return/exhaust air in accordance with the approved shop drawings and specifications. With horizontal fixed bars powder coated extruded aluminium.
18
-
-
Supply, installation, testing and balancing of Square Shape ceiling diffusers with removable core & anti smudge ring & volume control dampers as per approved drawings and specifications. Powder coated extruded aluminium construction.
50
-
-
Supply, installation, testing and balancing of powder coated Square shape return air diffusers with removable core, antismudge ring & without volume control damper as per approved shop drawings & specifications. Powder coated extruded aluminium construction.
75
-
-
Supply, Fabrication, installation and testing of the Insulated Flexible Duct, complete with connecting rings, duct supports etc as per standards and specification of following sizes:-
-
-
-
250 mm dia
50
-
-
200 mm dia
50
-
-
100 mm dia
100
-
-
150 mm dia
100
-
-
Supplying & fixing of opposed blade Volume control dampers in supply air duct collars as per approved shop drawings and specifications.
40
-
-
Supply, installation, testing and balancing of inlet air louvers with bird screen and volume damper for fresh air, as per approved shop drawings & specifications. Powder coated/Anodised extruded aluminium construction.
31.5
-
-
Supply, installation, testing and balancing of louvers with bird screen for exhaust air as per approved shop drawings & specifications. Powder coated/Anodised extruded aluminium construction.
26
-
-
Supply and handing over to client(as spare) of 600 mm x 600 mm x 150 mm (deep) HEPA filters (efficiency 99.97% down to 0.3 microns)
4
-
-
Supply, installation, testing and commissioning of back draft dampers in pressurization fans
8
-
-
Supply, Fabrication, installation and testing Kitchen exhaust ducting of sheet 16 G Mild Steel. Suitable access doors shall be provided at every 3m.
325
-
-
THERMAL INSULATION
-
-
-
Supply, installation and testing of Acoustic lining with Neoprene faced fibreglass in supply and return air ducts as per the specifications. All ducts shown cross hatched on the approved shop drawings shall be provided with acoustic lining as per the specifications:
-
-
-
25 mm thick
550
-
-
50 mm thick
10
-
-
Supplying, installing and testing of 19 mm thick insulation with protective coating on chilled water and condensate drain piping and fitting like valves, flanges union, etc. as per the approved shop drawings and specifications, the 'R' value should be minimum R-0.35:
-
-
-
25 mm dia pipes
535
-
-
20 mm dia pipes
1330
-
-
40 mm dia condensate drain pipes.
450
-
-
32 mm dia condensate drain pipes
530
-
-
25 mm dia condensate drain pipes
300
-
-
20 mm dia condensate drain pipes
655
-
-
Supply, installation and testing of 25 mm thick insulation with protective coating on chilled waterpipes and fittings like valves, flanges and unions, etc. as per approved drawings and specifications, the 'R' value should be minimum R-0.35 for the following:-
-
-
-
100 mm dia pipes
120
-
-
80 mm dia pipes
200
-
-
65 mm dia pipes
325
-
-
50 mm dia pipes
400
-
-
40 mm dia pipes
390
-
-
32 mm dia pipes
580
-
-
Supply, installation and testing of 32 mm thick insulation with protective coating on chilled water pipes and fittings like valves, flanges and unions, etc. as per the approved shop drawings & specifications, the 'R' value should be minimum R-0.35:
-
-
-
200 mm dia pipes
50
-
-
150 mm dia pipes
50
-
-
125 mm dia pipes
580
-
-
WATER COOLED CHILLED WATER UNITS
-
-
-
Supply, Installation, testing, connection and participation in commissioning of SCREW WATER CHILLING UNITS each complete with 150 TR actual capacity (300 TR PLANT CAPACITY ) at specified conditions, screw compressor, motor, starter panel machine mounted, water cooled condenser, insulated chiller, flow switch at chiller and condenser, vibration isolators, integral refrigerant piping and wiring, accessories as required and called for, automatic and safety controls mounted in central micro-processor based console panel and all mounted on a steel frame complete as per specifications. Motor shall be suitable for 415±10% 50 cycles. 3 phase AC supply. Refrigerant used shall be Ozone friendly R-134a/R-123 as detailed in specifications. The chilling unit shall be compatable with BMS system. (2W + 01SB)
CHILLER
Chilled Water IN 54 DEG F
Chilled Water OUT 44 DEG F
Fouling Factor 0.0005
CONDENSER
Condenser Water IN 87 DEG F
Condenser Water OUT 97 DEG F
Fouling Factor 0.001
Minimum COP 5.4
IPLV 6.17
should confirm to ARI 550/590-1998
REFRIGERANT
R-134a /R-123
3
-
-
Supplying, installing, testing and commissioning of PN16 rated Axial Split Coupled Vertical Inline Pump complete with CI Casing, Bronze impeller (as per specifications), SS 416 Shaft, mechanical seal(should be easily replaceable without disturbing the pump shaft and motor shaft). The pump motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase power supply. The motor selected shall be energy efficient having efficiency (Class I) at full load ranging between 91.5% to 94% in accordance with motor rating as per specification. Minimum pump efficiency shall be 75%. The motor of pumps shall be suitable for operation on variable frequency drive and confirm to EFF1/IE2. Variable Application Pump to be provided with IP55 motor mounted integrated VFD for sensorless/wireless control and VFD should be capable to vary till 60Hz to meet the desired duty parameters.2 Nos of Wireless sensors must be considered for each zone and if any wiring required to pump controller shall be included in cost. Motor Mounted Integrated VFD should be pre-wired to motor from the OEM factory for unit responsibility. All pumps shall be properly aligned at manufacturer's facility. The pumps are compatable with BMS system. Separate Controller with IP54 protection to be provided for controlling chilled water pump and motorised by pass valve to maintain the minimum flow through chiller in case of load variation is below the minimum flow of chillers.
The quoted price shall include cost of thermal insulation and cladding for chilled water Pumps. Pumps shall be selected as per following parameters;
-
-
-
Primary chilled water Pumps (including one as standby) for chilling units Flow rate = 360 USGPM, Pump Head = 15M of water column, Pump Motor HP = 7.5 HP.
3
-
-
Condenser Water Pumps (including one as standby) Flow rate = 450 USGPM, Pump Head =18M of water column, Pump Motor HP =12.5 HP
3
-
-
Secondary chilled water Pumps suitable for operation with VFD (including one as standby) for Zone A, Hospital Blocks Flow rate = 488 USGPM, Pump Head = 30M of water column, Pump Motor HP = 20 HP
2
-
-
Secondary chilled water Pumps suitable for operation with VFD (including one as standby) for Zone B including OT Block and ICU Block Flow rate = 235 USGPM, Pump Head = 25M of water column, Pump Motor HP =10 HP
2
-
-
Primary Hot water Pumps (including one as standby) for Hot Water Generator Flow rate = 50 USGPM, Pump Head = 15M of water column, Pump Motor HP = 2.0 HP
3
-
-
Secondary Hot water Pumps suitable for operation with VFD (including one as standby) for Zone B including OT Block and ICU Block Flow rate = 66 USGPM, Pump Head = 25M of water column, Pump Motor HP = 3 HP
2
-
-
COOLING TOWER
Supply, installation, testing and commissioning of Induced Draft Cooling Towers for air conditioning system. Each tower shall be complete with FRP basin, mounted on structural steel rail supports with spring vibration isolators. casing, distribution system, twin cell, filling, louvers, OSHO approved access ladders & platforms, electronic water level control, fan and motor. Motor shall be suitable for operation on VFD and rated for 415±10% volts, 50 cycles, 3 phase power supply, Isolator panel at cooling tower and earthing, shall also be included. The noise level shall not exceed 60 dBA at a distance of 15 meter from the cooling tower and it must be ensured that no noise & vibrations under any circumstances gets transmitted surroundings. Tower for air conditioning system shall be selected on the basis of water temperature 87-97° F, ambient wet bulb 80° F and nominal capacity shall be as follows. Cooling tower for (300 TR PLANT CAPACITY) plant having flow rate of 450 USGPM each @ 87-97° F water temperature (200 TR EACH)
2
-
-
HOT WATER GENERATOR
Supply, installation, testing and commissioning of Electric Hot Water Generator of following Matching electrical immersion heater banks.
All automatic and safety controls such as manual reset, high temperature cut off, step Electrical panel mounted on generator frame complete with internal wiring, contractors, Interconnecting cables between panel and heater.
Thermometers and pressure gauges at inlet and outlet of electric hot water generator.
Hot Water Generator as described above of Capacity 100 KW (including one as standby)
Inlet Water Temperature 100 °F
Outlet Water Temperature 120 °F
Flow Rate = 50 GPM
No. of Steps = 8
Smallest heater bank shall be 25 KW
CHILLED/HOT WATER EXPANSION TANK
3
-
-
Supplying, installing, testing and commissioning of MS construction OPEN TYPE EXPANSION TANK with valves along with necessary accessories
-
-
-
Expansion tank of size 1.0 mx1.0 mx 1.0 m for Chilled Water System
1
-
-
Expansion tank of size 0.5 mx 0.5 mx 0.5 m for Hot Water System
1
-
-
MAIN HVAC PANEL-PLANT ROOM
Design, manufacturing, supply, installation, testing & commissioning of the following panels suitable for operation on 415V, 3 phase, 4 wire, 50 Hz. supply system. The panel shall be indoor, free standing, floor/wall mounted, sheet metal enclosed, cubicle type, dust & vermin proof, fully compartmentalized(Form-4B) made out of 2mm with 14 SWG CRCA sheet steel complete with aluminium bus bars, powder coating, necessary wiring, cable glands etc. The scope of work also include necessary power & control cabling, complete interlocking between all equipments as per sequence of operation, earthing of equipments, cable trays, end terminations etc. The Panel shall be suitable for TOP and Bottom Entry both. Cabling & earthing on to the incomer shall be provided by the electrical contractor. All motor feeder incomers shall be suitable for motor duty application. All starter feeders shall be equipped with minimum 2 pole auto/manual selector switch & 1 NO + 1 NC potential free aux. contacts for use by Building automation system & comprising of the following:
INCOMER -1 & 2 (From different sections of Main LT Distribution Panel)
800 amps (50kA) 4P EDO type air circuit breaker with built in Overload, Short Circuit, Earth Fault, Under Voltage and Over voltage microprocessor based release with minimum 10 Trip History data with LED/LCD Display unit and measurment as per specification and with following accessories
Note: The two incomers of panel shall be electrically interlocked in such a way that only one Multifuction meter of accuracy class-I, with 3 Nos. 800/5 amps, CL-1, 10VA CTs to measure Real Time
1
-
-
Real Time
Total active energy (KWH/MWH)
Maximum demand (KVA/MVA) (KW/MW)
Maximum demand reset count.
Instantaneous power factor
Logging of active energy eight time of a day
Current
Voltage
Frequency / Harmonics
Breaker ON / OFF / TRIP indicating lights with control MCB’s.
BUS BAR
1000 amps TPN (50 KA), 91E grade Aluminium bus bars with insulated colour coded heat.
OUTGOING
Three(3) Nos. 315 amps TPN, MCCB, 50KA, TO 100KW starter of 150TR chiller. Each of Three(3) Nos. 315 amps TPN, MCCB,50KA, TO 100KW Hot Water Generator (HWG) Pump. Three(3) Nos. 32 amps, TPN MPCB's To 7.5 HP as an outgoing feeders to 1 No. Primary Two(2) Nos. 63 amps, TPN MPCB's To 20 HP VFD complete as required as an outgoing Two(2) Nos. 32 amps, TPN MPCB's To 10 HP VFD complete as required as an outgoing Three(3) Nos. 40 amps TPN MPCB's , 12.5 HP, as an outgoing feeders to 1 No. Condensor Two(2) Nos. 20/25 amps TPN MPCB's, for 3.0 HP VFD complete as required as an outgoing Three(3) Nos. 16/20 amps TPN MPCB's, for 2.0 HP, as an outgoing feeders to 1 No. Primary Two (2) Nos. 32 amps TPN MPCB's, 10 HP, as an outgoing feeders to 1 No. Cooling Tower
-
-
-
SPARES
Spare Space for One (1) No. 630 amps TPN, MCCB, 50KA, There shall be space to accommodate the VFD in compartment.
Two (2) Nos. 63 amps TPN MCCB's for space to accommodate 15 HP Star Delta starters.
Three (3) Nos. 32 amps TPN MPCB's for space to accommodate DOL starters.
Motor control centre as described above (Kindly Refer SLD before manufacturing the Panels)
Notes:
1) All incoming & outgoing shall be BMS Compatability.
1) MCCB's shall be motor duty and suitable for 50 KA (ICS) fault current.
2) Both incomers shall be electrically interlocked.
3) Necessary cable alleys, space for spare switches, internal wiring, control wiring/cabling and copper earthing of all equipment shall also be included. All MCB’s/MCCB’s shall be motor duty rating.
4) All MCCB’s shall be with Neutral Link.
5) The final selection of relay, contactor and timer shall be done as per Type-2 Coordination chart.
6) There shall be sufficient space to accommodate the VFD in line with breaker wherever it is required within the panel.
-
-
-
PIPING - CHILLED WATER & CONDENSER WATER
Supply and fixing in position the following MS heavy class (C) pipes cut to required lengths and installed with all welded joints, providing and fixing in position the necessary fittings like elbows, tees and reducers, mating flanges & sockets for following:-
-
-
-
200 mm Dia
220
-
-
150 mm dia
210
-
-
125 mm dia
70
-
-
100 mm dia
70
-
-
80 mm dia
30
-
-
65 mm dia
30
-
-
40 mm dia
25
-
-
25 mm dia
30
-
-
Supply, Installation, testing and commissioning of Motorised Butterfly valve (MODULATING) of following sizes with counter flanges and accessories Pressure rating - PN-16
-
-
-
150 mm dia
14
-
-
125 mm dia
7
-
-
100 mm dia
1
-
-
Supply, Installation, testing & commissioning of Manual Butterfly valves with matching flanges. The valves should have feasibility of changing the inner lining if wornout and the handles should have lockable facility. Pressure rating - PN-16
-
-
-
200 mm dia
6
-
-
150 mm dia
12
-
-
125 mm dia
6
-
-
100 mm dia
6
-
-
80 mm dia
6
-
-
65 mm dia
2
-
-
40 mm dia
4
-
-
25 mm dia
32
-
-
Supplying and fixing the following Dual Plate Check valves with Pressure rating - PN-16 matching flanges in position conforming to technical specifications for following due:
-
-
-
150 mm dia
5
-
-
125 mm dia
3
-
-
100 mm dia
2
-
-
Supply and fixing the following ‘Y’ Strainers in position Pressure rating - PN-16 conforming to technical specifications:
-
-
-
150 mm dia
5
-
-
125 mm dia
3
-
-
100 mm dia
2
-
-
Supply and fixing in position the following automatic back wash type Pot strainers :
-
-
-
200 mm dia pipes-chilled water
1
-
-
200 mm dia pipes-condenser water
1
-
-
Supply, installation, testing and commissioning of Flexible connections of suitable pressure rating to be installed at pumps, chillers, suction, discharge and at pipes crossing building expansion joints.
-
-
-
150 mm dia pipes
16
-
-
125 mm dia pipes
12
-
-
100 mm dia pipes
4
-
-
Supplying, installation, testing and commissioning of 19 mm Auto air vents
10
-
-
Supplying and fixing in position SS 304 the industrial Dial type pressure gauges with gun metal valves.
32
-
-
Supplying and fixing in position SS 304 the mercury-in- glass industrial Dial type thermometers.
12
-
-
Supplying and fixing in position the Drain- Cock with ball valve 25 mm dia
10
-
-
Supplying and fixing in position Automatic Balancing valves Pressure rating - PN-16 in position conforming to technical specifications for the following:
-
-
-
150 mm dia
3
-
-
125 mm dia
3
-
-
PIPING - HOT WATER : Providing and fixing in position the following MS heavy class (C) pipes cut to required lengths and installed with all welded joints, providing and fixing in position the necessary fittings like elbows, tees and reducers, mating flanges & sockets for BAS:
-
-
-
80 mm dia
35
-
-
65 mm dia
130
-
-
50 mm dia
10
-
-
Supply, Installation, testing and commissioning of Motorised Butterfly valve with Pressure rating – PN-16 (MODULATING) of following sizes with counter flanges and accessories
-
-
-
65 mm dia
3
-
-
50 mm dia
2
-
-
Supply, Installation, testing & commissioning of Manual Butterfly valves with Pressure rating - PN-16 matching flanges. The valves should have feasibility of changing the inner lining if wornout and the handles should have lockable facility.
-
-
-
65 mm dia
19
-
-
25 mm dia
16
-
-
Supply and fixing the following Dual Plate Check valves with Pressure rating - PN-16 matching flanges in position conforming to technical specifications :
-
-
-
65 mm dia
5
-
-
Supply and fixing the following ‘Y’ Strainers Pressure rating - PN-16 in position conforming to technical specifications:
-
-
-
65 mm dia
5
-
-
Supply and fixing in position the following automatic back wash type Pot strainers of size 65 mm dia
1
-
-
Supply, installation, testing and commissioning of Flexible connections of suitable pressure rating to be installed at pumps, hot water generator, suction, discharge and at pipes crossing building expansion joints.
-
-
-
65 mm dia pipes.
16
-
-
Supplying, installation, testing and commissioning of 19 mm Auto air vents.
8
-
-
Providing and fixing in position SS 304 the industrial Dial type pressure gauges with gun metal valves.
16
-
-
Providing and fixing in position SS 304 the mercury-in- glass industrial Dial type thermometers.
6
-
-
Providing and fixing in position the Drain- Cock with ball valve 20 mm dia.
7
-
-
Providing and fixing in position Automatic Balancing valves Pressure rating - PN-16 in position conforming to technical specifications 65 mm dia.
3
-
-
THERMAL INSULATION
-
-
-
Supply, installation and testing of 25 mm thick insulation with protective coating on chilled water, hot water pipes and fittings like valves, flanges and unions, etc. as per for following pipes approved shop drawings and specifications, the 'R' value should be minimum R-0.35:
-
-
-
100 mm dia pipes
70
-
-
80 mm dia pipes
70
-
-
65 mm dia pipes
130
-
-
Supply, installation and testing of 32 mm thick insulation with protective coating on chilled water, hot water pipes and fittings like valves, flanges and unions, etc. as per the approved shop drawings & specifications, the 'R' value should be minimum R-0.35:
-
-
-
200 mm dia pipes
130
-
-
150 mm dia pipes
130
-
-
125 mm dia pipes
70
-
-
Supply, installation and testing of insulation IN TRENCH/BURIED chilled & hot water pipes and fittings etc. as per the approved shop drawings & specifications, the 'R' value should be minimum R-0.35:
-
-
-
150 mm dia pipes
60
-
-
100 mm dia pipes
60
-
-
65 mm dia pipes
60
-
-
AIR CONDITIONING PLANT
-
-
-
Supply, install, commissioning and testing of commercial Air curtain unit for preventionofdust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified.
-
-
-
In OT of size -2400x2500MM DOOR SIZE
3
-
-
In ICU of size -2400x2500MM DOOR SIZE
1
-
-
In NICU of size- 2400x2500MM DOOR SIZE
1
-
-
(BOQ Schedule 'A' Part-XXVII). INTERNAL ELECTRIFICATION AXIAL FLOW FANS
-
-
-
Supply, installation, testing and commissioning of Tube/Vane Axial Fans (Fans shall be AMCA certified), complete with TEFC motor, drive and vibration isolators. Motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase AC supply and shall be High efficiency class EFF1 for all the fans. The fan shall be low RPM and selected for low noise level. Fan capacities based on 35 mm WC static pressure (25mm for Toilet exhaust fans and LLB fans), shall be as follows :Note: Fan installed in open area shall be provided with weather cowl. Cowl shall be molded to cover and overlap the entire fan casing and base support to protect it from adverse condition.
-
-
-
TOILET EXHAUST FANS
-
-
-
TOILET EXHAUST FAN (CFM 420)
1
-
-
TOILET EXHAUST FAN (CFM 770)
1
-
-
TOILET EXHAUST FAN (CFM 1350)
1
-
-
TOILET EXHAUST FAN (CFM 3915)
1
-
-
TOILET EXHAUST FAN (CFM 1210)
1
-
-
TOILET EXHAUST FAN (CFM 1210)
1
-
-
TOILET EXHAUST FAN (CFM 2200)
1
-
-
TOILET EXHAUST FAN (CFM 650)
1
-
-
TOILET EXHAUST FAN (CFM 1407)
1
-
-
TOILET EXHAUST FAN (CFM 560)
1
-
-
TOILET EXHAUST FAN (CFM 2700)
1
-
-
TOILET EXHAUST FAN (CFM 1700)
1
-
-
TOILET EXHAUST FAN (CFM 2950)
1
-
-
TOILET EXHAUST FAN (CFM 1300)
1
-
-
TOILET EXHAUST FAN (CFM 1070)
1
-
-
TOILET EXHAUST FAN (CFM 800)
1
-
-
TOILET EXHAUST FAN (CFM 935)
1
-
-
TOILET EXHAUST FAN (CFM 990)
1
-
-
TOILET EXHAUST FAN (CFM 1025)
1
-
-
LAUNDARY EXHAUST FAN (CFM 7700)
1
-
-
LAUNDARY EXHAUST FAN (CFM 7700)
1
-
-
PLANTROOM FANS
-
-
-
HVAC PLANT ROOM EXHAUST (CFM 13000)
1
-
-
HVAC PLANT ROOM SUPPLY (CFM 13000)
1
-
-
PLUMBING PLANT ROOM EXHAUST (CFM 3400)
1
-
-
PLUMBING PLANT ROOM SUPPLY (CFM 3400)
1
-
-
LT ROOM EXHAUST (CFM 10000)
1
-
-
LT ROOM SUPPLY (CFM 10000)
1
-
-
STP EXHAUST FAN (CFM 10300)
1
-
-
STP SUPPLY FAN (CFM 10300)
1
-
-
ETP EXHAUST FAN (CFM 6300)
1
-
-
ETP SUPPLY FAN (CFM 6300)
1
-
-
Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±10% volt single phase 50 cycles AC supply.
-
-
-
CSSD-AUTOCLAVE-BASEMENT (CFM 465)
1
-
-
AUTOPSY-BASEMENT (CFM 360)
1
-
-
SPECIMEN STORE-PATHOLOGY (CFM 250)
1
-
-
SPECIMEN CUBICALS-PATHOLOGY (CFM 220)
1
-
-
STOOL,URINE &EXAM-PATHOLOGY (CFM 240)
1
-
-
SLUICE- DELIVERY ROOMS-FF (CFM 170)
1
-
-
HP STERILIZER ROOM (CFM 400)
1
-
-
HAEMAT LAB (CFM 300)
1
-
-
HISTOLOGY LAB (CFM 300)
1
-
-
CHEMICAL LAB-1 (CFM 300)
1
-
-
OTHER SEROLOGICAL LAB (CFM 400)
1
-
-
BLOOD SCREENING LAB (CFM 650)
1
-
-
DELIVERY ROOM (CFM 360)
1
-
-
AUTOCLAVE (CFM 230)
1
-
-
PANTRY-BLOCK C- G FL (CFM 200)
1
-
-
SECOND FLOOR
-
-
-
DU/SL- BLOCK B (CFM 215)
1
-
-
DIRTY UTILITY- BLOCK B (CFM 240)
1
-
-
DIRTY UTILITY- BLOCK D (CFM 400)
1
-
-
THIRD FLOOR
-
-
-
DIRTY UTILITY-BLOCK B (CFM 265)
1
-
-
SOILED LINEN &DU BLOCK D (CFM 310)
1
-
-
TOILET EXHAUST FANS
-
-
-
SECOND FLOOR -BLOCK A (CFM 1100)
1
-
-
TOILET EXHAUST -SF-BLOCK C (CFM 160)
1
-
-
TOILET EXHAUST -FF-BLOCK E (CFM 250)
1
-
-
Supplying, installing, testing and commissioning of direct driven PROPELLER FANS for exhaust air as shown in drawings. Each fan shall be complete with permanent split capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed louvers for weather protection as required. Fan selection arrangement and Electrical characteristics shall be as follows :
-
-
-
225 mm dia 900 RPM fan suitable for 220±6% volts 50 cycles, 1 phase AC supply.
45
-
-
300 mm dia 900 RPM fan suitable for 220±6% volts 50 cycles, 1 phase AC supply.
4
-
-
Supply, Installation, Testing and Commissioning of Electrostatic Type Kitchen Exhaust Air Cleaner (Dry Scrubber) complete with the following accessories, components etc. making it a completely functional dry scrubber suitable for Kitchen Hood Exhaust.
1
-
-
1. Casing - Shall be made of 0.63 mm galvanized pre-plasticized/powder coated sheet on outside and 0.63 mm GI sheet inside with PUF foam of 36 kg/m3 density insulation in between sheets to make 25 mm thick panels.
2. Pre Filter Section with Wire Mesh SS Filters for Coarse Particle Removal
3. Electrostatic Precipitator Section - Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder coated, SS Spiked ionizers to create high voltage DC field, aluminium collector plates which should be alternatively charged positive and negative with large collecting area with deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE/DOP test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state.
4. Fan Section with DIDW Backward Curved Fan having following capacity @ specified SP and should be complete with suitable TEFC Induction Motor and Belt Drive arrangements. Capacity: 12300 cfm @ 75mmwg SP
Motor: 7.5KW.
-
-
-
Supplying, installing, testing and commissioning of CELLULOSE FILL AIR WASHER (Including fans), giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing, SS water sump , Cellulose fill, water distribution header, GI piping, Audco make butterfly valves, for quick fill; isolation of tank and pumps, Y strainers for pumps and necessary fittings.
1
-
-
The quoted price shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen fabric filters and drift eliminators. The price shall also include horizontal monoblock pumps of Beaconweir / KBL make of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water alongwith starter panel. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor.each complete with squirrel cage induction motor (mounted internally), airfoil centrifugal fan belt drive and vibrations isolators.Motors shall be suitable for 415 +- 10% volts, 50 cycles , 3 phase AC supply an static pressure shall be as indicated . Fan-motor assembly (as whole) shall be statically & dynamically balanced to grade G6.3 as per ISO-1940/AMCA 204-3. It shall be suitable for outdoor duty and complete with duct flexible connections and volume control damper . CFM-11050
-
-
-
CONTROL PANELS FOR FANS.;Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted control panels, including anchoring into the wall, wiring terminating into MCCB and copper earthing, in each panel shall be provided by the electrical contractor. All wiring and copper earthing of motors from the panel shall be included. All outgoing shall be provided with stop / manual / auto / selector switch to facilitate operation through BAS. All starters shall be provided with potential free contact for connections to building automation system. The panel shall include the following components & accessories. a. Suitable rating incoming MCCB / MCB. b. Suitable rating AC-3 duty contractor (s), overload relay with builtin single phasing preventor, star delta timer for S/D starter.
c. 96 sq.mm digital voltmeter, ammeter, selector switches, CTs & Control MCBs. d. Phase indicating lights & control MCBs. e. Push buttons for manual start/stop of motor. f. On status indicating light for starter with control MCB. g. Minimum 2 pole auto / manual selector switch & 1 NO + 1 NC potential free aux. contracts for use by building automatic system. h. Time delay relay for delayed restart of motor. i. Interlocking terminals & wiring for fire damper, motorized dampers etc. as per control scheme. The number of control panels shall be as follows :- 25 amps MPCB, upto 7.5 HP DOL starter. 32 amps MPCB, 10/12.5 HP Star Delta Starters.
-
-
-
25 Amps MPCB, upto 7.5 HP DOL starter.
28
-
-
32 Amps MPCB, 10/12.5 HP Star Delta Starters
2
-
-
(BOQ Schedule 'A' Part-XXVIII). MISC ITEMS. Supplying, Installing, Testing & Commissioning of the Central Control Stations consisting of the following
1
-
-
Supply, installation, testing and commissioning of Intel Core i3-4150 Processor (Dual Core, 3MB, 3.50GHz w/HD4400 Graphics) (338-BEED), 8GB Dual Channel DDR3L 1600MHz (4GBx2) (370-AAPE), Intel Integrated Graphics, 128GB Solid Drive (400-ADLX), Windows 7 Professional, English, 64bit, US English (QWERTY) Dell KB212-B QuietKey USB Keyboard Black (580-AAQX), Up to 90% efficient PSU Base 49.5cm (19.5 INCH) Non-touch with Camera, Integrated (321-BBGU), 8x Slimline DVD+/-RW Drive (429-AAMY), Dell USB Optical Mouse MS111 (570-AACR), ENERGY STAR Version 6.0 (387-BBEZ), System Power Cord (Philipine/TH/US) (450-AAOJ), Safety/Environment and Regulatory Guide (English/French/Dutch) (340-AGIK), 1-Watt BIOS (340-ABMZ), Heat Sink for Integrated Graphics (412-AADE) with 20 Inch Monitor
-
-
-
A4 Size Laser Printer
1
-
-
Supplying, Testing and Commissioning of the Graphical Software providing the facility to create / provide the following, static and animate the Graphics, Navigation between pages, display of logs, changing the time zones.The BMS platform shall natively support standard communication protocols such as Modbus / BACnet™. The software should be Web Based Software Required to remotely monitor the system for 5 concurrent users.
This software should have all kinds of dedicated application required to operate a Chiller Plant Manager, all the licenses required to make Chiller Plant Manager fully function shall a part of this software. IT SHOULD HAVE INBUIT FEATURE OF EMAIL FOR SENDING CRITICAL ALARMS WITHOUT ADDITING ANY EXTERNAL SOFTWARE/HARDWARE. IT SHOULD HAVE INBUILT FEATURE OF ENERGY MONITORING.
1
-
-
Supplying, Testing and Commissioning of the necessary Hardwares/Softwares for Integrating it with 3rd party Devices on Bacnet/Modbus. Integrator module Shall be of Controller Manufacturer only. (a) chiller-3 Nos, (b) Variable speed pump VFD-11 Nos
1
-
-
Supply, Installation, Testing & Commissioning the following equipment: Network controller - Providing, installing, testing and commissioning of Network Supervisory Controller unit for connecting all controllers to it and transferring data to PC platform.(A) The unit shall comply following codes and standards: UL and CE.(B) The unit shall support OPEN STANDARD protocol BACnet and Modbus (C) Shall be able to store reports and event logs.(D) WEB ENABLED.The controller shall be capable of connecting the future expansion DDCs / Integrators. The Controller shall be able to support both Modbus & BACnet controllers. It should have at least 3 configurable ports for connecting BACNET/MSTP devices & all these ports should be capable to work as Modbus port. Each port should be able to take at least 60 DDCs in a single loop. It should be capable of storing data at least for 30 hours without any battery in case of power failure & should have micro SD card for backup recovery. It should have capability to connect expansion modules for enhanced flexibility. It should be web enabled and should be able to work with any kind of search engine, it should have wi-fi capability to connect with remote devices. It should freely support Android and MAC mobile applications for remotely managing the system through GPRS for wi-fi connectivity without any additional cost. It should have a feature to be used as a gateway/router for 3rd party applications on BACNET. It should be web enabled and should not require any software for controlling/monitoring of hard wired points. HIS CONTROLLER SHOULD WORK AS A CHILLER PLANT MANAGER MODULE ON WHICH CPM PROGRAMMES & LOGICS CAN BE WRITTEN, NO CHINA MADE CONTROLLERS ARE ACCEPTED.
1
-
-
Programmable and Application specific controller - Providing, installing, testing and commissioning of filed mounted BACNet IP controllers of the following configurations and as per below specifications: (A) The programmable controllers processors shall be 32-Bit, 50 MH, BACnet Compatible.The DDC Controllers should be on BACnet, UL listed & BTL tested. The DDC controller shall be as per the I/O Summary. The Controller shall have built in memory, minimum 4 GB, to save, Alarms, Trends, Schedules & graphics for the connected points. Controller shall have onboard LAN port. Providing, installing, testing and commissioning of vandal proof, lockable and secure MS cabinets for the Controllers along with all accessories shall be part of this item. NO CHINA MADE CONTROLLERS ARE ACCEPTED. Maximum 4 AHU to be connected per DDC panel. Minimum 15% spare IO Points needs to be kept.
1
-
-
Supply, installation, testing & commissioning of the following Sensors :
-
-
-
Differential Pressure switch across the Air Handling Units for indicating the fan & filter status
8
-
-
Current Relay
22
-
-
Duct type temperature sensors for measuring Return air temperature at the Air Handling Units
13
-
-
Immersion Temperature Sensor
11
-
-
Outside Temp + RH Sensor
1
-
-
Single level switch for CT
2
-
-
Ultrasonic Clampon Flow Meter
1
-
-
Wall mounted display type & RH temperature sensor
3
-
-
Water Pressure differential pressure transmitter
3
-
-
Supply, Installation, Testing & Commissioning of the following cables as per the specifications:
-
-
-
Unshielded Signal Armoured Cables, 2 C X 1.0 Sq.mm. stranded tinned Cu Conductor, PVC sheathed type. Signal Cable from Controllers to Sensors shall be used.
5500
-
-
Shielded Communication Armoured Cables, 2 C X 1.0 Sq.mm.stranded tinned Cu Conductor, PVC sheathed. Communication Cable from Controllers to Controllers & to Third Party Devices shall be used.
300
-
-
Unshielded Signal Armoured Cables, 3 C X 1.5 Sq.mm. stranded tinned Cu Conductor, PVC sheathed type. Signal Cable from Controllers to valve shall be used.
100
-
-
Cat6e Cable with PVC Conduit
100
-
-
Supply and fixing GI perforated cable trey for the following sizes including providing removable cover knock out holes and fixing accessories complete as required including floor supports, bonds, access boxes and tap off boxes as per specification and cross over as per site requirement
-
-
-
(a) 25 x 50 x 25mm
125
-
-
(b) 25 x 100 x 25mm
100
-
-
Programming and commissioning of entire system
1
-
-
Supply and installation of external thermal insulation with protective coating on ducts as per specification the ‘R’ value should be minimum R-0.6.
(a) 19mm thick insulation for return air ducts and supply ducts in return air path.
1100
-
-
(b) 13mm thick insulation for supply air ducts.
1500
-
-
(BOQ Schedule 'A' Part-XXIX). MEDICAL GAS PIPELINES SYSTEM.
-
-
-
Supply, Instllation testing and commissiong of copper piping as per technical specification BS: 13348 as mentioned here-in-after. Note :- Installation of piping shall be carried out all as per international standards with utmost cleanliness. Only pipes, fittings and valves which have been degreased as per International standards shall be used, pipe fixing clamps for upto 28mm diameter, pipes shall be non ferrous suitable for the diameter of the pipe. For the pipes of the size above 28mm rigid metallic hanging or cemented supports to be used. The main lines to the building to be taken overhead through metallic poles or through underground ducts with inspection removable slabs, All pipe joints shall be made using inert gas fluxless brazing method. All joints shall be of copper to copper and shall be brazed by silver brazing filler material without flux. During brazing, joints shall be continuously purged with oil free dry nitrogen to prevent the formation of copper oxide on the inside surface of the joint. All pipes shall be installed without springing or forcing and shall be protected against mechanical injury. Testing: After erection, all the new pipes cleaned or purged with the help of dry nitrogen gas. Complete system shall be tested with dry nitrogen 2 times of working pressure for 24 hours. Painting: All existing and exposed pipes shall be painted with two coats of synthetic enamel paint with color codification as per international standards. All concealed pipes to have gas identification bands / labels at appropriate distance. All pipes which are embedded in the walls shall be tested/painted/labeled and properly insulated. Certification: It is to be ensured that pipes are fit for the particular service and complete cross connection (anti-confusion) test shall be carried out. Distribution piping system: MATERIAL (PIPE): Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS: EN 13348 medical grade pipe. Third party inspection shall be carried out for copper piping with a certificate (Eg. Lloyd’s or TUV or SGS). Fittings shall be made of copper and suitable for a working pressure of up to 17 bar and specially made for brazed socket type connections. Copper fittings shall comply with EN 1254:1 factory degreased and brazing filler metals shall comply with EN 1044. Fitting shall be degreased, individually packed for medical use. Installation & testing Installation of piping shall be carried out with utmost cleanliness. Only pipes, fittings and valves that have been degreased and fittings shall be used at site. Pipe fixing clamps shall be of non-ferrous or non-deteriorating plastic suitable for the diameter of the pipe.
-
-
-
Inert gas welding technique shall be adopted by passing oxygen free nitrogen gas inside the copper pipes during silver brazing, in order to avoid carbon deposition inside the copper pipes, only copper-to-copper joints are permitted on site except threaded or flanged joints may be made where pipelines are connected to items such as valves and control equipment. No flux shall be used for joining Copper to Copper joints and on for joints made on site. Copper to copper joints shall be brazed using a 2% silver-copper phosphorous brazing alloy CP104. A total of 5 joints shall be cut out for examination to establish the quality of the joints being made on site. The insides shall be clean and free from oxides and particulate matter and the minimum penetration of the brazing alloy at any point shall be three times the wall thickness of the tube. If the joints examined do not conform to these requirements, then adjacent joints shall be cut out and examined until the extent of faulty workmanship has been made good. Copper-to-brass or gunmetal joints shall only be made under controlled conditions off site. The joints are ordinarily used to join short copper pipe tails to brass, gunmetal or bronze fittings to permit their connection into the pipeline. The sub-assemblies shall be degreased and individually sealed in bags or boxes before delivery to site. Adequate supports shall be provided while laying pipelines to ensure that the pipes do not sag. Suitable sleeves shall be provided wherever pipes cross through walls / slabs. All pipe clamps shall be non-reactive to copper.
After erection, the pipes are to be flushed with dry nitrogen gas and then pressure tested with dry nitrogen at a pressure equal to twice the working pressure or 150 psig, whichever is higher for a period of not less than 24 hours.
Maximum interval between supports (Horizontal and Vertical) shall be as under:-
(12mm Pipe - 1.5m, 15mm pipe - 1.5m, 22mm pipe – 2m, 28mm pipe-2m, 35mm pipe-2.5m, 42mm pipe -2.5m, 54mm pipe - 2.5m, 76mm pipe – 3meter)Painting. All the pipes from manifold/plant upto the outlets should be painted with two coats of synthetic enamel paint and colour codification should be as per standards followed and with consultation with competent authorities of the Institute.
-
-
-
(i) 76mmODX1.5mm thick
40
-
-
(ii) 54mmODX1.2mm thick
50
-
-
(iii) 42mm ODX1.2mm thick
70
-
-
(iv) 28mmODX 0.9mm thick
1420
-
-
(v) 22mmODX 0.9mm thick
3300
-
-
(vi) 15mm ODX 0.9mm thick
1650
-
-
(vii) 12mm ODX 0.9mm thick
930
-
-
Supply,Installation, testing and commissioning of gas outlet points for Oxygen, Nitrous Oxide, Air, AGSS & Vacuum system as per technical specification of HTM 02-01/ISO 7396-1/NFPA99 standards and all as specified here-in-after. Note:- Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The anaesthetic gas scavenging (AGS) terminal unit shall conform to BS6834: 1987/NFPA99. The gas terminal unit shall be as per EUQ medical device regulation (here-in-after called as MDR) / medical device directeive (here-in-after called as MDD). The gas terminal unit should be EU MDR / MOD Certified from notified body having four digit notified body number of American UL/ETL Listed. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be fixed to the backplate by means of a tamper proof clip-fit mechanism. The first fix shall incorporate a maintenance valve (except for vacuum) and a test plug. The test plug shall provide an effective blank to enable carcass pressure testing. The second fix plastic components shall be manufactured with the pin index permanently moulded into the gas specific socket. The socket assembly shall retain a capsule assembly, containing the check valve and probe ‘O’ ring seals. The replaceable capsule assembly shall enable all working parts subject to wear through usage to be replaced as a factory tested assembly, thereby reducing maintenance time. Each termination block assembly shall be pressure tested by the pressure decay method.
Terminal units shall be gas specific and only accept the correct medical gas probe. Gas specific components shall be pin-indexed to ensure that a correct gas specific assembly is achieved so that in normal course of dismantling for repair or maintenance, parts from other gases cannot inadvertently be used. Wall mounted terminal units shall incorporate an anti-rotation pin to engage with connected downstream medical equipment ensuring correct orientation.
All screws, probe roller pins, locking springs and the anti-rotation pin shall be manufactured from stainless steel. The second fix assembly shall be incorporate three injection moulded parts in fire-retardant nylon 66. All wetted parts (except seals) shall be brass or copper. Copper stubs pipes shall be manufactured from phosphorous de-oxidised non-arsenical copper to BS EN 1412:1996 grade CW024A, manufactured to metric outside diameters in accordance with BS EN 13348:2001 R250 (half hard) or Type K for all gas services. All user accessible parts, 2nd fix, gas ID ring, plaster box, fascia cover and inks shall include a silver antimicrobial additive for inherent antimicrobial protection.
Terminal units installed in walls, bedhead trunking, headwalls or fixed pendants shall be connected to the pipeline with a copper stub pipe. Pressure gases and vacuum shall incorporate a 12mm copper stub pipe or 1/2” O.D. copper Type K with a swaged end for direct connection to a 12mm O.D. copper tube without the need for an extra fitting, thereby requiring only a single brazed joint to be made. Terminal units for anaesthetic gas cavenging shall incorporate a 15mm O.D. copper stub pipe.
-
-
-
(i) for Oxygen
331
-
-
(ii) for Nitrous Oxide
4
-
-
(iii) for Compressed Air ( 4 Bar )
47
-
-
(iv) For Compressed Air (7 Bar)
5
-
-
(v) For Vacuum
331
-
-
(vi) For AGSS/WAGD
3
-
-
Supply,Installation, testing and commissioning of matching probe/adopter with one end suitable for hose & other end suitable for terminal units as per technical specifications NFPA99/HTM 02-01/ISO 7396-1 : MATCHING PROBE / ADOPTERS FOR, GAS OUTLETS as per NFPA-99 latest edition / HTM 02-01 listed one end of matching probes shall be suitable for Medical Gas Outlet point & other end shall be suitable for hose for Oxygen, Nitrous Oxide, Compressed air 4 bar, compressed air 7 bar, DISS connection, vaccum.
-
-
-
(i) for Oxygen
331
-
-
(ii) for Nitrous Oxide
4
-
-
(iii) for Compressed Air ( 4 Bar )
47
-
-
(iv) for Compressed Air (7 Bar)
5
-
-
(v) for Vacuum
331
-
-
(vi) for AGSS/WAGD
3
-
-
GAS ALARMS Supply,Installation, testing and commissioning of TOUCH SCREEN MASTER ALARM PANEL which shall comply with NFPA99/HTM 02-01/ISO 7396-1 standard. NOTE:- It shall be EUROPEAN CE certified from notified body having 4 digit notified number/American ETL or UL or ATL Listed.Master Alarm System panel shall be microprocessor based with individual microprocessors on each area display and sensor board. The sensors shall be capable of local or remote mounting. Each area display module/sensor unit shall be gas specific & with an error message display for an incorrect connection. Alarm shall be capable with hospital BMS facility. Master Alarm panel allow users to set up customized instructions for each alarm signal, to appear on the screen when the signal is in alarm. Alarm shall be with the touch screen interface on the alarm panel LCD. Edit or Incorporate user-defined instructions into an emergency response plan by the hospital facility. Alarm shall be capable of monitors up to 25-60 local inputs. The alarms shall be field expandable with the facility for addition of extra modules up to six services to be accommodated per standard box. A built-in web server in each panel allows a remote operator to display the alarm's web page and view alarm signals, pressures, and other networked devices. Each specific service shall be provided with numerical digital read comprising of 0-250 psi for positive pressure and 0-30 inch Hg for vacuum. The touch screen panel readout shall provide a constant indication of each service being measured. Minimum screen size shall be 7-8 inches Touch Screen LCD Display. A bar graph trend indicator shall be provided for each service indicating a green “NORMAL”, yellow “CAUTION” and a red “HIGH” or “LOW” alarm condition. Under normal operation the bar graph display shall move up and down in the green range depending on service usage. If an alarm occurs, the “RED” alarm light will flash and an audible alarm will sound. Pushing the “ALARM SILENCE” button will cancel the audible alarm but the unit will remain in the alarm condition until the problem is rectified. The default set points shall be +/- 20% variation from normal condition. In the calibration mode the following parameters shall be field adjustable:
1
-
-
High/Low set points Imperial /Metric Units Repeat alarm enable/disable Set points shall be adjustable by two on board push buttons. In addition, “PUSH TO TEST” & “ALARM SILENCE” buttons shall be easily accessible to operate and test the unit. Combination master/area alarms shall have no moving parts and shall require no maintenance after initial installation. • Medical Gas Pipleine plant room/manifold alarm system shall indicate the following O2/N2O/Co2 gases pressure Normal / Low / Hi with digital read out Medical Air System pressure Normal / Low / Hi with digital read out Medical Vacuum System pressure Normal / Low / Hi with digital read out The emissions from alarms shall conform with EMC standards or as per guideline of standard to be followed.
-
-
-
TOUCH SCREEN AREA ALARM PANEL Supply,Installation, testing and commissioning of Medical Gas Area Alarms which shall comply with NFPA99/HTM 02-01/ISO 7396-1 standard. It shall be EUROPEAN CE certified from notified body having 4 digit notified number/American ETL or UL or ATL Listed. Note:- It shall be capable of monitoring up to 6 gas services by means of pressure sensors that detect deviations from the normal operating limits. It shall have each gas service shall be displayed on LCD touch screen Panel. The area alarm shall be controlled by LCD display touch screen having minimum size should be 6 inches . An audible warning shall sound simultaneously with any failure indication and a mute facility shall be provided. Following a mute selection the audible will resound after approximately 15 minutes, or shall operate simultaneously shall a further alarm condition occur. A “Mute” switch shall be provided inside the panel for use during any maintenance resulting in prolonged pipeline or plant shutdown. This facility shall automatically reset when the gas service returns to normal. . The alarm panel shall have a ‘Test’ facility to prove the integrity of the internal circuits, Gas status and audible warning.
Each alarm shall provide a green LED to indicate that electrical power is available at the panel and a red LED to indicate ‘System Alarm’. In the event of a system fault or electrical power supply failure the ‘System Alarm’ LED shall illuminate (flashing).
The emissions from alarms shall conform with EMC standards or as per guideline of standard to be followed.
Pressure sensor scale shall include negative and positive pressure scall, allowing one sensor to cover all gas and vacuum supply monitoring. Electrical connectors shall be designed for frequent disassembly. Spade connectors are not acceptable. The gas status bar shall indicate Green steady for normal condition, and change to red flashing for fault conditions. Loss of comunication with the gas sensor is indicated by changing the pressure reading to “ERR” and gas ID bar to Red steady. The gas pressure is displayed for each service along with a vertical bar showing the alarm set points relative the the live pressure reading.
A single tamper proof fastener shall be used to gain access to the hinged door. The hinge shall operate through a minimum of 120° to provide adequate access. It shall have each gas service shall be displayed on LCD to show ‘Normal’ (green), ‘Low’ and ‘High’ pressure (red) conditions. Medical vacuum systems shall be displayed in the ‘Normal’ (green) and ‘Low’ vacuum (red) conditions.
-
-
-
(i) 2 Gas Service
15
-
-
(ii) 3 Gas Service
7
-
-
(iii) 5 Gas Services
2
-
-
ZONAL VALVE BOX WITH GAUGES Supply,Installation, testing and commissioning of Zonal Valve boxes which shall be manufactured of 18 gauge steel/aluminium sheet with white enamel finish. The valve box shall have a sliding, opaque door with pull ring and clear gauge window. The removable window cannot be replaced when any valve is closed. The frame assembly shall be capable of adjusting for variances in wall thickness up to 1”. The window shall conceal piping and mounting screws. Window shall be labeled “Caution Medical Gas Shut - Off Valves - Close Only in Emergency.” Provide clear viewing space in the window to display the gas service, the pressure gauges and the label for areas controlled by the valve.
a) All Medical Gas Valves along with Gauges shall be incorporated with Valve box and shall conform to HTM0201/ISO 7396-1/NFPA 99. Valves shall be ball-type, with Teflon seats and adjusting stem packing gland with Teflon stem seal.
b) Ball valves shall be rated 600 WOG, actuate from full “ON” to full “OFF” by 90 degree turn of vinyl gripped valve handle. c) Furnish and install only valves with factory installed BS EN 13348 copper tubing or type K copper tubing extensions.
d) Minimum Gas Valves size should be 15mm & 22mm or 1/2'' & 3/4''
e) All valves shall be cleaned for oxygen, capped and sealed in a polyethylene bag for shipping and storage.
f) Colour coded self-adhesive gas labels for compliance with NFPA 99/HTM 02-01/ISO 7396-1 labeling shall be applied. Apply labels to each valve in the assembly for gas service identification according to manufactures recommendations. g) Zone valves shall include 1.5 inch pressure gauge reading 0 to 100 psig for oxygen, air, nitrious oxide , CO2; 0 to 300 psig for surgical air; and 0 to 30 HG for vacuum. h) All zone valve boxes assemblies shall read pressure downstream and vacuum upstream of the valve as NFPA 99/HTM0201/ISO 7396-1. Valves shall be piped left to right with right being on patient side. The medical gas valve box should be CE marked and fully satisfy the requirement as per HTM0201/ISO 7396-1/NFPA99.
-
-
-
(i) 2 Gas Service
15
-
-
(ii) 3 Gas Service
7
-
-
(iii) 5 Gas Services
2
-
-
Supply, Installation, Testing & Commissioning of Oxygen Fully Automatic Manifold Gas Panel which shall comply to HTM 02-01/NFPA99/ISO 7396-1. Note- The manufacturer shall provide evidence of Electromagnetic compatibility (EMC) for the manifold, e.g., an EMC test certificate. The pressure sensor monitors the pressure in each bank of cylinders and bank pressure gauges attached to each bank regulator (1st stage). A pressure sensor measures delivery pressure, and a delivery pressure gauge is attached to each line (2nd stage) regulator for easy service. The system incorporates a 7 inches touch screen color display, graphical interface to indicate pressure in each bank of cylinders and line pressure. All alarms are shown on display with a color indication as per code requirement, and the history of the alarms can be accessed through the logs. A mechanical pressure gauge backs up the digital display in case of power failure. To increase safety, the control system has an electronic warning signal to inform the user to perform regular maintenance. The warning shall be reset once the maintenance is done. When cylinder capacity, pressure, and quantity are corrected and updated in the control system, it provides an estimated average gas consumption, with a clear indication for cylinders with gas phase inside. All electrical components are in a separate enclosure to limit dust and water penetration and simplify electrical connection with BMS and Alarms. The control system supports RS485 and BAC net communication network. The control system is linked with plug and socket connectors for easy removal. For added safety, the voltage inside the panel does not exceed 24V D.C. The control system has a 1024*768 high-resolution 7-inch capacity touch screen. It has a “screen saver” function to extend the life time of the display to more than 20,000 hours. The display may run at a reduced 30% brightness to save screen life. The screen comes to full brightness if any alarm conditions are active and revert to 30% brightness 5 minutes after the manifold system returns to normal. The control system has a restricted Setup Mode to adjust warning levels for line pressure, selecting a pressure measurement system between the bar and psi. Additionally, a Service Mode is provided to allow alarms to be deactivated during commissioning and service and manual operation selection of a duty bank. Service mode is accessible with secured ID and Password. The manifold panel has automatically changes to supply the distribution system from the “Standby” bank when the pressure in the “Duty” bank falls to a predetermined level. Each side of the manifold can be fully isolated via a full-flow ball valve, facilitating servicing of any regulator without supply interruption. The inlet of the 1st stage (bank) regulator is protected from the particulate matter by a 25µm sintered bronze filter. There is a fail-safe system In the event of power failure. The left bank supply is a primary source, with full supply pressure and flow continuity. The right bank supply will take over when the left bank is empty. Once the primary left bank is refilled, it will remain a primary source. Upon power restoration, the unit reverts to the original bank of cylinders. Once a change over has occurred, and the cylinders have been replaced, the system automatically resets alarm conditions. Manual changeover arrows allow servicing on either side of the system to be achieved. The manual changeover to an already exhausted side is blocked for safety reasons.
1
-
-
The manifold panel should be certified with a ‘C.E.’ Mark as a Class IIb medical device according to MDR* ( Medical Device Regulation) (E.U.)2017/745 from notified body having 4 digit notified body number or American ETL/UL/ATL lsited. All polymers and elastomers in the gas flow that can be subjected to working pressure greater than 3,000 kPa are halogen-free. The materials selected are compatible with oxygen and other types of gases. In addition to the digital control panel, panel should be equipped with analog gauges to give you the peace of mind that you can always monitor gas pressure and operation. The manifold automatically changes from the depleted primary supply bank to the secondary supply bank without fluctuation in line pressure utilizing dome bias loading and unloading of the bank regulators. After replacement of the depleted cylinders, the manifold automatically indicates the replaced cylinder bank as the secondary supply. Manifold shall have integrated test point (Terminal unit) system same as mentioned under ''Terminal Units/Gas Outlets'' specifications. Built-in test terminal unit. A medical gas terminal unit is built in for easy testing. It removes the need to install terminal units, copper pipes, brazing, and testing on-site, giving you additional installation time and cost savings. In addition, Gem shield terminal units offer high durability and antimicrobial protection at any time. Manifold Panel must be real-time remote monitoring and reporting of the functioning of the manifold. It shall provide push notifications and access to manifold system details wherever hospital managment needs. Panel has an integrated non-return valve along with a lockable isolation valve to the distribution system to ensure compliance with HTM/ISO/NFPA99 standards. Built-in test terminal unit. A medical gas terminal unit is built in for easy testing. It removes the need to install terminal units, copper pipes, brazing, and testing on-site, giving additional installation time and cost savings. Manifold Panel must be real-time remote monitoring and reporting of the functioning of the manifold. It shall provide push notifications and access to manifold system details wherever hospital managment needs. Panel has an integrated non-return valve along with a lockable isolation valve to the distribution system to ensure compliance with HTM/ISO/NFPA99 standards. The manifold panel should be igntion tested or adbiatic testing as per ISO 10524-2. Bidder shall submit reference Ignition or Adbiatic certificate for technical evaluation. The manifold control system will supply a flow of 1500-2000 L/ Min at 50-60 psi.
-
-
-
Supply, Installation, Testing and Commissioning of Oxygen Manifold ( 16+16) as per technical specifications given here-in-after. Note:-The cylinders shall not be included in the quoted price. : Oxygen Manifold 16+16 As per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1 latest edition. The Modular Manifold system shall comprise of extendable bank's of 16+16cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & High pressure brass fitting made of high tensile brass shall be used. Flexible copper tail pipes with bull nose RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves. high pressure flexible tail pipes should be made of copper pipe of ID 1/4 " x 15 swg the manifold shall be tested hydraulically at 225 Kg/ cm2 pressure. it shall be degreased for oxygen service and shall be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains which shall be galvanized.
1
-
-
Supply, Installation, testing and commissioning of 10 cylinder Emergency Oxygen Supply System with fully automatic manifold control as per technical specifications given here-in-after. Note:- The cylinders shall not be included in the quoted price. : Emergency Oxygen System - As per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1 latest edition. The Modular Manifold system should comprise of extendable bank's of 10 cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & High pressure brass fitting made of high tensile brass should be used. Flexible copper tail pipes with bul nose RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves,isolation valve & Manual regulator. high pressure flexible tail pipes shall be made of copper pipe of ID 1/4 " x 15 swg. The manifold should be tested hydraulically at 225 Kg/ cm2 pressure. It shall be degreased for oxygen service and shall be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains which shall be galvanized.
1
-
-
OXYGEN FLOW METER WITH HUMIDIFIER BOTTLE (CE MARKED) Supply, Installation, testing and commissioning of OXYGEN FLOW METER WITH HUMIDIFIER BOTTLE It shall be as per Class I of Medical Device Directives (93/42/EEC) & CE marked. It shall be manufactured in an ISO 13485:2003 quality management system duly certified constructed in accordance with the requirement of international standard. Back Pressure Compensated flow meter for accurate gas flow measurement with following features:
A) Control within a range of 0-15 LPM.
B) It shall meet the precision and durability standard.
C)The flow meter body shall be made of brass chrome plated materials.
D)The flow tube and components shall be made of clear, impact resistant polycarbonate.
E)Flow tube shall have large and expanded 0-15 LPM range for improved readability at low flows.
F) Inlet filter of stainless steel wire mesh to prevent entry of foreign particles
G) The humidifier bottle shall be of capacity 200ml and shall be made of unbreakable & reusable polycarbonate /polysulfone/polypropylene material autoclavable at 121 degree centigrade.
285
-
-
Supply, Installation, Testing & Commissioning of N2O Fully Automatic Manifold Gas Panel with Heater Kit (L+R) which shall be comply to HTM0201/NFPA99/ISO 7396-1 and as per following technical specifications. Note:-The manufacturer will provide evidence of Electromagnetic compatibility (EMC) for the manifold, e.g., an EMC test certificate. The pressure sensor monitors the pressure in each bank of cylinders and bank pressure gauges attached to each bank regulator (1st stage). A pressure sensor measures delivery pressure, and a delivery pressure gauge is attached to each line (2nd stage) regulator for easy service. The system incorporates a 7 inches touch screen color display, graphical interface to indicate pressure in each bank of cylinders and line pressure. All alarms are shown on display with a color indication as per code requirement, and the history of the alarms can be accessed through the logs. A mechanical pressure gauge backs up the digital display in case of power failure. To increase safety, the control system has an electronic warning signal to inform the user to perform regular maintenance. The warning shall be reset once the maintenance is done. When cylinder capacity, pressure, and quantity are corrected and updated in the control system, it provides an estimated average gas consumption, with a clear indication for cylinders with gas phase inside. All electrical components are in a separate enclosure to limit dust and water penetration and simplify electrical connection with BMS and Alarms. The control system supports RS485 and BACnet communication network. The control system is linked with plug and socket connectors for easy removal. For added safety, the voltage inside the panel does not exceed 24V D.C. The control system has a 1024*768 high-resolution 7-inch capacity touch screen. It has a “screen saver” function to extend the lifetime of the display to more than 20,000 hours. The display may run at a reduced 30% brightness to save screen life. The screen comes to full brightness if any alarm conditions are active and revert to 30% brightness 5 minutes after the manifold system returns to normal. The control system has a restricted Setup Mode to adjust warning levels for line pressure, selecting a pressure measurement system between the bar and psi. Additionally, a Service Mode is provided to allow alarms to be deactivated during commissioning and service and manual operation selection of a duty bank. Service mode is accessible with secured ID and Password. The manifold panel has automatically changes to supply the distribution system from the “Standby” bank when the pressure in the “Duty” bank falls to a pre-determined level. Each side of the manifold can be fully isolated via a full-flow ball valve, facilitating servicing of any regulator without supply interruption. The inlet of the 1st stage (bank) regulator is protected from the particulate matter by a 25µm sintered bronze filter. There is a fail-safe system In the event of power failure. The left bank supply is a primary source, with full supply pressure and flow continuity. The right bank supply will take over when the left bank is empty. Once the primary left bank is refilled, it will remain a primary source. Upon power restoration, the unit reverts to the original bank of cylinders. Once a change over has occurred, and the cylinders have been replaced, the system automatically resets alarm conditions.
1
-
-
Manual changeover arrows allow servicing on either side of the system to be achieved. The manual changeover to an already exhausted side is blocked for safety reasons. The manifold panel shall be certified with a ‘C.E.’ Mark as a Class IIb medical device according to MDR* ( Medical Device Regulation) (E.U.)2017/745 from notified body having 4 digit notified body number or American ETL/UL/ATL lsited. All polymers and elastomers in the gas flow that can be subjected to working pressure greater than 3,000 kPa are halogen-free. The materials selected are compatible with oxygen and other types of gases. In addition to the digital control panel, panel shall be equipped with analog gauges to give you the peace of mind that you can always monitor gas pressure and operation. The manifold automatically changes from the depleted primary supply bank to the secondary supply bank without fluctuation in line pressure utilizing dome bias loading and unloading of the bank regulators. After replacement of the depleted cylinders, the manifold automatically indicates the replaced cylinder bank as the secondary supply. Manifold should have integrated test point (Terminal unit) system same as mentioned under ''Terminal Units/Gas Outlets'' specifications. Built-in test terminal unit. A medical gas terminal unit is built in for easy testing. It removes the need to install terminal units, copper pipes, brazing, and testing on-site, giving you additional installation time and cost savings. In addition, Gem shield terminal units offer high durability and antimicrobial protection at any time. Manifold Panel must be real-time remote monitoring and reporting of the functioning of the manifold. It shall provide push notifications and access to manifold system details wherever hospital managment needs. Panel has an integrated non-return valve along with a lockable isolation valve to the distribution system to ensure compliance with HTM/ISO/NFPA99 standards. Built-in test terminal unit. A medical gas terminal unit is built in for easy testing. It removes the need to install terminal units, copper pipes, brazing, and testing on-site, giving you additional installation time and cost savings. Manifold Panel must be real-time remote monitoring and reporting of the functioning of the manifold. It shall provide push notifications and access to manifold system details wherever hospital managment needs. Panel has an integrated non-return valve along with a lockable isolation valve to the distribution system to ensure compliance with HTM/ISO/NFPA99 standards. The manifold panel should be igntion tested or adbiatic testing as per ISO 10524-2. Bidder has to submit reference Ignition or Adbiatic certificate for technical evaluation. . The manifold control system will supply a flow of 1500-2000 L/ Min at 50-60 psi.
-
-
-
Supply, Installation, Testing and Commissioning of Nitrous Oxide Manifold ( 1+1) as per technical specifications as mentioned here-in after. The cylinders shall not be included in the quoted price. : N2O manifold header as per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1. The Modular Manifold system shall comprise of extendable bank's of 4+4 cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & high pressure brass fitting made of high tensile brass shall be used. Flexible copper tail pipes with bull nose RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves. High pressure flexible tail pipes shall be made of copper pipe of ID 1/4 " x 15 swg the manifold shall be tested hydraulically at 225 Kg/ cm2 pressure. It shall be degreased for oxygen service and be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pig tail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non – return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains .
1
-
-
Supply, Installation, testing and commissioning of 2 cylinders emergency N2O supply system with fully automatic manifold control including Heating Kit as per technical specifications as mentioned here-in after. Note:-The cylinders shall not be included in the quoted price. Emergency Oxygen System shall be as per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1. The Modular Manifold system should comprise of extendable bank's of 10 cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & high pressure brass fitting made of high tensile brass shall be used. Flexible copper tail pipes with bull nose LH RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves,isolation valve & manual regulator. High pressure flexible tail pipes shall be made of copper pipe of ID 1/4 " x 15 swg. The manifold shall be tested hydraulically at 225 Kg/ cm2 pressure. It should be degreased for oxygen service and shall be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pig tail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non – return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains .
1
-
-
Supply, Installation, testing and commissioning of Combined Medical Air System with minimum Duplex configuration in one package. The combimned medical air plant capacity shall be 2100 LPM includes running & standby (One running + One standby) designed to provide Pharmacopeia grade medical air for health care facilities. The unit shall be equipped with the HTM0201/ISO 7396-1/NFPA99 mandated features as per compliant medical gas pipeline systems. Medical Air compressors with integrated compressors, duplex dryers, duplex filtration, instrumentation and controls all assembled in one package . All controls between compressors & dryers are connected and wired. Oil Lubricated Screw/Oil Free Scroll/Oil Free Screw/Oil Free tooth compressors shall be equipped with integrated VSD/VFD drive mechanism. Intelligent human machine interface incorporating on board flash memory and real-time clock for recording operational parameters in the event log. The central control system shall operate at low voltage and include BMS connection for system fault, system emergency, reserve fault and pressure fault. The central control unit shall incorporate a user friendly 5” high-definition coluor touch screen display with clear pictograms and LED indicators, providing easy access to system operational information. The controller shall be equipped with the remote monitoring function.
The air system shall incorporate minimum duplex compressors suitable for both continuous and frequent start/stop operation at a nominal outlet pressure of 1000 kPa (10 bar). Each compressor output 1200 LPM @ 9-10 bar pressure. The noise level of the each compressor shall be maximum 62dB(A).
The duplexed filter and dryer module shall incorporate high efficiency water separators, oil coalescing general purpose & high efficiency filters, heatless regenerative desiccant dryers, activated carbon filters with hopcalite catalyst and bacterial filters. The performance of the filters shall be according to technical specifications given here-in-after.
• Oil coalescing general purpose filter: mass efficiency of 99,3%,
tested according to ISO 8573-2 & ISO 12500-1;
• Oil coalescing high efficiency filter: mass efficiency of 99,92%,
tested according to ISO 8573-2 & ISO 12500-1;
• Activated carbon filter: max remaining total oil content of 0,003
mg/m³, tested according to ISO 8573-5 & ISO12500-2;
1
-
-
• Bacterial filter: particle count efficiency of 99,98% at
MPPS=0.06μm, tested according to ISO 12500-3.
The dryer control system shall incorporate a Purge Control Management system with digital dew point minitor that freezes the regeneration of the desiccant once adequate dew point is reached in the inactive tower. Only when the dew point level in the active tower deteriorates to an unacceptable level will the intelligent controller switch towers.
Dryer shall be equipped with central control system shall operate at low voltage and include BMS connection for system fault, system emergency, reserve fault and pressure fault. The central control unit shall incorporate a user friendly 5” high-definition color touch screen display. with clear pictograms and LED indicators, providing easy access to system operational information. The controller shall be equipped with the remote monitoring function.
The air receiver shall be supplied with relevant test certificates. Each air receiver shall be fitted with a zero-loss electronic drain valve. The receiver assembly shall be fitted with a pressure safety valve,
set at 10% receiver over pressure with a pressure gauge. The receivers shall be installed separately and sized according to the design guidelines. The system shall be tested at factory as a complete medical device. In case of NFPA99 compliance system, there shall be confirmation/declaration from OEM on their letter head and third party factory test report.
-
-
-
Supply, Installation, testing and commissioning of Medical Vacuum Supply System conform to HTM0201/ISO 7396-1/NFPA99 with Duplex Configuration (One running + One standby) in one package as per technical specifications as mentioned here-in after. Note:-Vacuum pumps shall employ automatic rotation of the lead pump to maximize pump life and ensure even wear. It shall ensure the minimum pipe line vacuum level of -450mmHg is maintained at the plant service connection point at the rated volumetric ‘free air’ flow rate with two pumps with one pump on standby. The bacteria filtration system shall be ‘duplexed’ such that each filter can be isolated for replacement of the filter cartridge. The vacuum pumps shall be single-stage, oil-sealed and air-cooled rotary vane vacuum pumps driven by an electric motor. Pumps shall be specifically designed to work with clean air, inert gas or small amounts of water vapour the pump has an inlet port with exhaust port and a gas ballast valve. Vacuum pumps shall be air-cooled, oil lubricated rotary vane type suitable for both continuous and frequent start/stop operation. A rotor with three vanes is positioned inside the pump cylinder and it is supported by means of two bearings. Rotors shall be driven by IE3 efficiency electric motors. Pump inlets shall include an integral non-return valve to prevent oil suck back and pressure increases in the vacuum system. Each vacuum pump shall have an integral separator filter to ensure a virtually oil-free exhaust. Each pump shall be fitted with anti-vibration pads between the pump foot and mounting frame. The pumps shall have mineral oil to ensure a long service interval. Each Vacuum Pump produces minimum 4000LPM. The factory packaged skid frame mounted vacuum systems consists of rotary vane vacuum pumps, duplex bacteria filteration, pre-wired control panel. interconnecting wiring & piping. The package Medical Vacuum system should be integrated with Verical Vacuum Receiver.
Bacteria Filters The duplex bacteria filter system shall incorporate high efficiency filter elements. A differential vacuum indicator shall be installed across the filter to indicate blockage. Additional pressure sensors shall be installed at the inlet and outlet of the filter to measure the pressure drop across the filters. Each filter shall be designed and sized to carry the full plant design flow capacity with a pressure drop not exceeding 33mbar (25mmHg). Bacteria Filter elements shall have penetration levels not exceeding 0.005% when tested by the sodium flame method in accordance with BS 3928:1969 and utilizing particles in the 0.02-to-2-micron size range. Drain flasks shall be connected to each filter. Drain flasks shall be manufactured from transparent material with a polymer coating on the inner and outer surfaces to maintain a seal in the event of inadvertent breakage of the Pyrex flask. All drain flasks shall be suitable for sterilization and be connected via a manual isolating valve.
1
-
-
Control System
The central control system shall provide an intelligent human machine interface incorporating on board flash memory and real-time clock for recording operational parameters in the event log. The central control system shall operate at low voltage and include BMS connection for common fault. Visualization of plant inputs, outputs, and status through a web browser, using a simple. The central control unit shall incorporate a user friendly 4.3” high- definition touch screen displays with clear pictograms and LED indicators, providing easy access to system operational information. The controller shall be equipped with an integrated 4G module for remote monitoring of the equipment. Cascading of vacuum pumps shall be achieved by measuring the vacuum level at the plant inlet with a pressure transducer.
A mechanical back-up facility shall ensure continued operation in the event of a control system malfunction. The control system shall normally employ automatic rotation of the lead pump to maximize pump life and ensure even wear. Vacuum receiver(s) shall be supplied with relevant test certificates and have a total volume of at least 100% of the plant output in 1 minute in terms of free air aspired at normal working pressure. Each vacuum receiver shall be powder coated from inside and outside. The receivers shall be installed separately and sized according to the design guidelines.
-
-
-
WARD VACUUM UNIT (CE marked)
Supply, installation, testing and commissioning of Medical Device Directives (MDD) / Medical Device Regulation (MDR) (Class-I) (93/42/EEC) & CE marked. It shall be manufactured in an ISO 13485:2003 quality management system duly certified constructed in accordance with the requirement of international standard. It must consist of technical specifications given here-in-after.
1. One number of Suction Regulator and 1no of 1000 ml polysulfone /polycarbonate/polypropylene collection jar.
2. Suction Regulator - rSunction regulator shall be supplied with a safety jar, antibacterial filter and an anti-overflow safety device& shall have wide membrane continuous suction controller
3. WVU shall have vaccum levels: 0-760 mm of Hg and gauge fitted with a protective bumper device. 4. It shall be provided with on / off knob allowing for the quick restoration of a readjusted vacuum level. 5. Adjustment knob with a colour coded for 0 to 760 mm of Hg. Should have Polysulfone/polycarbonate 100cc safety jar, autoclavable at 121º C, unbreakable, fitted with an anti-overflow safety device and equipped with a plastic antibacterial filter. It shall be totally transparent, to ensure perfect sucked liquid visibility.
285
-
-
Theatre Suction Unit ( CE marked)
Supply, installation, testing and commissioning of Theatre Suction Unit Certified as per Class I of Medical Device Directives (MDD) / Medical Device Regulation (MDR) (93/42/EEC) & CE marked. It shall be manufactured as per ISO 13485:2003 quality management system duly certified constructed in accordance with the requirement of international standard. It will be trolley mounted. The unit will include one regulator having gauge and mounted on the trolley stand, having two reusable each 2000 ml plastic collection bottles mounted on the base of trolley unit and connected with regulator & low pressure tube inter-connections. Safety Jar 200 cc to be provided with regulator. The collection jar is made of unbreakable material, which is fully auto-cleavable at 121 Degree Centigrade.
2
-
-
Supply installation testing and commissioning of high pressure hose antistatic duly colour coded for Oxygen, Nitrous Oxide Compressed air and vacuum as per technical specifications as mentioned here-in after. It shall be as per International standard, antistatic and colour coded rubber tube – white for oxygen, blue for nitrous oxide, black for compressed air and yellow for vacuum with low pressure tubes for vacuum application.
150
-
-
HORIZONTAL/ VERTICAL BED HEAD PANEL (CE marked)
Horizontal/ Vertical Bed Head Panel (CE marked)-1200mm upto 2 Gas Outlets, configurations along with electrical switches. It shall confirm to HTM 02-01/ NFPA 99/EN/DIN/ISO 7396-1. The design shall be approved by the respective institute before installation and it is responsibility of the bidder after getting order they have to discuss with respective hospital authority and finalized the Bed Head Panel (Vertical/Horizontal) as per site condition. - Efficient, Safe & Robust design in extruded aluminium section. - Smooth curved surfaces, and choice of base colour and fascia plates. - Unit should have integrated rail system to mount accessories - The headwall system should be constructed of aluminium extrusions joined together to form a carcass to suit the particular application. Unit should be factory assembled for electrical and mechanical components. - Segregation of services i.e. Low voltage supplies, High Voltage supply and Medical gases should be maintained with minimum 2 tier/2 channel arrangements. - Front fascia plate should be removable individually to access for respective service.
- It should have one rail for mounting Accessories.
- Each bed-head unit shall be supplied with electrical and electrical outlets pre-fitted. Gas Outlets, Electrical sockets and others accessories configuration as follows for:
1200mm Bed Head Trunking configuration
1. O2 x 1
2. Vac x 1
3. 5 /15A combined Electrical socket with switch- 4 nos. 4. Vacuum Jar holder- 1 no. 5. Cut out/provisin for Nurse call bell
6. RJ45 socket/Ethernet-1
7. SS Basket Gas Outlets,
4
-
-
HORIZONTAL/ VERTICAL BED HEAD PANEL (CE marked)
Horizontal/ Vertical Bed Head Panel (CE marked)- 1500mm for upto 4/5outlets configuration along with electrical switches. It shall confirm to HTM 02-01/ NFPA 99/EN/DIN/ISO 7396-1. The design shall be approved by the respective institute before installation and it is responsibility of the bidder after getting order they have to discuss with respective hospital authority and finalized the Bed Head Panel (Vertical/Horizontal) as per site condition. - Efficient, Safe & Robust design in extruded aluminium section. - Smooth curved surfaces, and choice of base colour and fascia plates. - Unit should have integrated rail system to mount accessories - The headwall system should be constructed of aluminium extrusions joined together to form a carcass to suit the particular application. Unit should be factory assembled for electrical and mechanical components. - Segregation of services i.e. Low voltage supplies, High Voltage supply and Medical gases should be maintained with minimum 2 tier/2 channel arrangements. - Front fascia plate should be removable individually to access for respective service.
- It should have one rail for mounting Accessories.
- Each bed-head unit shall be supplied with electrical and electrical outlets pre-fitted. Gas Outlets, Electrical sockets and others accessories configuration as follows for 1500mm Bed head trunking:
1. O2 x 1/2
2. Air x 1
3. Vac x 1/2
4. 5 /15A combined Electrical socket with switch- 4 nos.
5. Vacuum Jar holder- 1 no. 6. Cut out/provisin for Nurse call bell
7. RJ45 socket/Ethernet-1
8. SS Basket.
36
-
-
HORIZONTAL/ VERTICAL BED HEAD PANEL (CE marked)
Horizontal/ Vertical Bed Head Panel (CE marked)- 1800mm for 6/8 Outlet configurations along with electrical switches. It shall confirm to HTM 02-01/ NFPA 99/EN/DIN/ISO 7396-1. The design shall be approved by the respective institute before installation and it is responsibility of the bidder after getting order they have to discuss with respective hospital authority and finalized the Bed Head Panel (Vertical/Horizontal) as per site condition. - Efficient, Safe & Robust design in extruded aluminium section. - Smooth curved surfaces, and choice of base colour and fascia plates. - Unit should have integrated rail system to mount accessories - The headwall system should be constructed of aluminium extrusions joined together to form a carcass to suit the particular application. Unit should be factory assembled for electrical and mechanical components. - Segregation of services i.e. Low voltage supplies, High Voltage supply and Medical gases should be maintained with minimum 2 tier/2 channel arrangements. - Front fascia plate should be removable individually to access for respective service.
- It should have one rail for mounting Accessories.
- Each bed-head unit shall be supplied with electrical and electrical outlets pre-fitted. Gas Outlets, Electrical sockets and others accessories configuration as follows for 1800mm Bed head trunking:
1. O2 x 2
2. MA x 2
3. Vac x 2
4. 5 /15A combined Electrical socket with switch- 8 nos. 5. Vacuum Jar holder- 1 no. 6. Cut out/provisin for Nurse call bell
7. RJ45 socket/Ethernet-1
8. SS Basket
9
-
-
Single arm Celling Pendent for the O.T. as per technical specification :Single Arm Pendant for Operation Theatre CE Marked, Multimovement Pendent shall be new design motorized Single arm(900mm) with up & down movement of 515 mm and load carrying capacity of 100-150 kg. The arm should rotated upto 330º- 340ºwith adjustable stopper. An extremely quite electric motor should reduce noise to a minimum, dampened stoppers and very low hand forces for horizontal movements should contribute to an ergonomically optimised workplace. The pneumatic brake system should adapted to various safety requirements and construction facilities. Modern and very quite, high performance motors shall well special spindles shall be used to realize precise & steady movement. As a safety feature the motor shall equipped with an over load protection. The large interior cross section for supply lines offers shall completely new applications with 120 mm diameter. The stoppers shall be infinitely variable from 0-330º-340º "service head shall be provided with the modular design to achieve maximum supply with minimum required space.service head should designed to host, Base, Gas Module, Electric Module and shelves . Upto 8 Gas outlets & 10 Electrical switches. Racks & shelves shall be provided to mount the equipments like monitor etc. The total length of the manager shall be 800mm. pendent shall be have 1 arms with shelves as per following details: a. Horizontal arm system - 1
b. Weight carrying capacity - 100-150 kg
c. 5/15 Amp. Electrical sockets without switches - 8 to 10 Nos.
d.Shelfs with side rails - 2 Nos.
e.Provision to fix Gas outlets(i.e.) as per distribution chart
f. Gas interface set for interface plate - 1
g.Ceiling mounting system for interin ceiling upto 1000 - 1
h. Interface plate with electrical fittings - 1
i. Ceiling cover for interin ceiling - 1
2
-
-
Double arm Ceilling Pendent for the O.T. as per technical specfication : Swievel Double arm Surgeon Pendent CE Marked Multimovement Pendent is a new design motorized (1000+800) arm with up & down movement of 515 mm and load carrying capacity of 80 kg. The arm can be rotated upto 330º- 340ºwith adjustable stopper. An extremely quite electric motor reduces noise to a minimum, dampened stoppers and very low hand forces for horizontal movements contribute to an ergonomically optimised workplace. The newly developed pneumatic brake system can be adapted to various safety requirements and construction facilities. Modern and very quite, high performance motors as well special spindles are used to realise precise & steady movement. As a safety feature the motor is equipped with an over load protection. The large interior cross section for supply lines offers completely new applications with 120 mm diameter. The stoppers are infinitely variable from 0-330º-340º "service head is provided with the modular design in shape to achieve maximum supply with minimum required space.service head is designed to hosts, Base, Gas Module, Electric Module and shelves . Upto 8 Gas outlets & 10 Electrical switches. Racks & shelves are provided to mount the equipments like monitor etc. The total length of the manager is 1000mm. Surgeon pendent will have 2 arms with shelves as per following details: a. Horizontal arm system - 2
b. Weight carrying capacity - 80kg
c. 5/15 Amp. Electrical sockets without switches - 8Nos.
d.Shelfs with side rails - 2 Nos.
e.Provision to fix Gas outlets(i.e.) Oxygen- 2, Vaccum- 2, Air 4 bar-1, Air 7 bar-1 & WAGD-1 no. f. Gas interface set for interface plate - 1
g.Ceiling mounting system for interin ceiling upto 1000 - 1
h. Interface plate with electrical fittings - 1
i. Ceiling cover for interin ceiling - 1
1
-
-
ANESTHESIA GAS SCAVENGING SYSTEM (AGSS)
The Anesthetic Gas Scavenging (AGS) System shall comply with HTM 02-01, HTM2022 and either EN ISO 7396-2 or BS 6834. The AGS system shall be a dedicated, specifically designed active extraction and disposal system for waste anesthetic gas as per technical specifications as mentioned here-in after. Note:- Each pump shall provide a flow of minimum 500 LPM. The AGS pump assemblies shall be skid mounted and included on the skid shall be the duplex pump(s), motor control unit(s) with starter/isolator, moisture drain flask and flexible connector(s) to connect the plant to the pipeline. Each pump shall include an electric motor and directly coupled impeller assembly. Impeller bearings in the pump(s) shall not require lubrication. The pump(s) shall be air cooled and rated for continuous operation.
Control System
Control panel shall incorporate an emergency panel isolation switch facility, which controls all electrical power to the exhauster unit, remote start switch panels and system indication lights. All control and status indication circuitry shall be limited to 24V a.c. A green ‘POWER ON’ indicator shall be fitted to the starter/isolator panel and shall illuminate whenever power is available to the 24V control and indication circuit. A ‘HAND/OFF/AUTO’ switch shall be provided to control operation of the pump, running the pump continuously when selected to ‘HAND’. When selected to ‘AUTO’, control of the pump shall be passed to the remote start switch panels. Operation of any of the remote start switches shall activate the pump. The pump shall continue to run until all remote switches are selected ‘OFF’.
The starter/isolator panel shall incorporate a thermal protection overload device. The thermal protection overload device shall also monitor the electrical power supply and phase input. In the event of a fault, the overload device shall break the circuit to the pump, preventing operation until the system is manually re-set. Operation of the overload device shall also break the circuit to the remote start switch panels, extinguishing the green running indicator.Simplex starter/isolator panels c/w alarm pressure switch and duplex units incorporate line pressure switch. This line pressure switch monitors vacuum levels and provides an additional control of the remote start switch and starter/isolator panel green ‘RUNNING’ indicators. The pressure switch shall also include a digital display providing an accurate readout of the vacuum level in the pipeline in order to assist with installation/commissioning and annual re-commissioning. Where a duplex system is installed each pump shall be controlled by a motor control panel to enable servicing of either pump or control gear whilst maintaining system operation. AGSS remote switch for Duplex AGSS pumps.
Duplex installations shall use remote start switches that include an amber ‘PLANT FAULT’ indicator. This shall illuminate, if either pump is set to ‘HAND’ or if one of the overloads trip. A red ‘PLANT EMERGENCY’ indicator shall also be provided and shall illuminate on all remote start switch panels if the vacuum level falls below the pressure switch set point level when the pump has been called. The on/off rocker switch shall include a green illuminated surround to indicate ‘mains on’.
AGSS system shall be classified as class I according to EU MDR. EU MDR (Medical Device Regulation EU 2017/745) repeals MDD (Medical Device Directive
93/42/EEC). Copy of declaration/confirmation document from OEM shall be submitted by the bidder.
1
-
-
Supply installation testing and commissioning of MEDICAL LINE VALVE, AS PER CE CERTIFIED / UL LISTED AS PER TECHNICAL SPECIFICATIONS : MEDICAL LINE VALVE, AS PER BS EN 1057 STANDRADS AS PER TECHNICAL SPECIFICATIONS ISOLATING VALVE RB/RN/SIM/AUDCO All ball valves as per BS 1057 are rated at 400 psig, as well as full vacuum ( 29.9" Hg). Valves go from full ON to full OFF by turning the vinyl-gripped valve handle 90 degree Locking-type handles may be ordered separately when required. Copper tubing is factory installed to help prevent valve seat damage during soldering. main and riser valves are not required to be installed in a box unless specially noted or required.
-
-
-
(i) 15mm OD
28
-
-
(ii) 22mm OD
30
-
-
(iii) 28mm OD
8
-
-
(iv) 42mmOD
4
-
-
(v) 54mmOD
2
-
-
(BOQ Schedule 'A' Part-XXX). MECHANICAL LAUNDARY PLANT.
-
-
-
(i) 25Kg Capacity side loading machine Supply, Installation , testing & commisioning of 25Kg Capacity, side loading machine (slucing machine ), steam heated : TECHNICAL SPECIFICATION FOR HEAVY DUTY WASHING MACHINE • The machine shall be Side Loading type, 25 Kg Capacity dry weight filling per charge, single Compartment.
• The inner basket shall be made of stainless steel SS 304 quality with minimum thickness of 18 SWG and outer basket shall be made of stainless steel SS 304 quality with minimum thickness of 16 SWG.
• Inside basket door shall be provided with double locking arrangements of latches. First lock by spring action and second by turning ‘T’ bolt in clockwise direction.
• The minimum Inner Basket Dimensions shall be 700 mm Dia x 960 mm length, to a corresponding minimum volume of 415 litres.
• Wash Motor shall be minimum of .75 kw on 415v, 3Phase, 50c/s, A.C.
• Forward and reverse timer to be provided to allow the basket to rotate in forward direction for few rotations and automatically in reverse direction for few rotations to avoid tangling of linen inside the machine and for a better wash
• A motor drives shall be through set of multiple pulleys and ‘V’ belts.
• The machine shall perform pre-wash, wash with soap solution and rinsing cycles
• The machine shall be fitted with Digital temperature controller to cut off heaters at the preset temperature automatically.
• The door shall be interlocked electrically to ensure that the electrical drive system do not function until the door is firmly closed.
• The machine shall not START if the door is left open.
• The inside basket doors shall have spring lock.
• An overflow arrangement shall prevent the machine from flooding with water.
• Thermal overload relay should cut off the supply to motor during overloading.
• The manufacturer should have ISO 9001: 2015 quality management system
• The supplier should agree for demonstration of the quoted model, if needed by the end user.
2
-
-
(ii) 50 Kg Capacity side loading machine Supply , Installation , testing & commisioning of 50Kg Capacity, side loading washing machine, steam heated. :TECHNICAL SPECIFICATION FOR HEAVY DUTY WASHING MACHINE
• The machine shall be Side Loading type, 50 Kg Capacity dry weight filling per charge, single Compartment.
• The inner basket shall be made of stainless steel SS 304 quality with minimum thickness of 18 SWG and outer basket shall be made of stainless steel SS 304 quality with minimum thickness of 16 SWG.
• Inside basket door shall be provided with double locking arrangements of latches. First lock by spring action and second by turning ‘T’ bolt in clockwise direction.
• The minimum Inner Basket Dimensions shall be 1130 mm Dia x 910 mm length, to a corresponding minimum volume of 735 litres.
• Wash Motor shall be minimum of 2.2 kw on 415v, 3Phase, 50c/s, A.C.
• Forward and reverse timer to be provided to allow the basket to rotate in forward direction for few rotations and automatically in reverse direction for few rotations to avoid tangling of linen inside the machine and for a better wash
• A motor drives shall be through set of multiple pulleys and ‘V’ belts.
• The machine shall perform pre-wash, wash with soap solution and rinsing cycles
• The machine shall be fitted with Digital temperature controller to cut off heaters at the preset temperature automatically.
• The door shall be interlocked electrically to ensure that the electrical drive system do not function until the door is firmly closed.
• The machine shall not START if the door is left open.
• The inside basket doors shall have spring lock.
• An overflow arrangement shall prevent the machine from flooding with water.
• Thermal overload relay should cut off the supply to motor during overloading.
• The manufacturer should have ISO 9001: 2015 quality management system
• The supplier should agree for demonstration of the quoted model, if needed by the end user
2
-
-
(iii) 50kg hydro extractor Supply , Installation, testing & commisioning of 50kg hydro extractor : TECHNICAL SPECIFICATION FOR HEAVY DUTY HYDRO EXTRACTOR
• The machine shall be direct drive type hydro extractor, 50Kg Capacity dry weight filling per charge
• The inner basket shall be made of stainless steel SS 304 quality with minimum thickness of 10 SWG and outer basket shall be made of stainless steel SS 304 quality with minimum thickness of 14 SWG.
• Minimum dimensions of the Inner basket shall be : 1000mm dia x 300mm depth.
• Extractor Motor shall be minimum of 10 HP
• Power Supply: 415v, 3Phase, 50c/s, A.C. Supply.
• The inner basket shall be designed for free rotation.
• Control system should have LED indications.
• Shall be provided with manual program selection for different time settings
• The controller unit shall consist of main MCB and starter arrangement for the drive motor
• Door interlocked to drive mechanism
• Air lock to prevent door opening when machine in operation
• Thermal overload protection for motor
• Outside basket shall be suspended on tough springs of machine frame so as to avoid any vibration due to uneven load on high speed. • Suitable size of drain designed for faster draining of water and avoids flooding of machine • The entire machine shall be suspended to minimize vibration. • The set of angular contact ball bearing should be provided to ensure free rotation of inner basket and designed to accept varying axial and thrust loads at high speed. • The manufacturer should have ISO 9001: 2015 quality management system • The supplier should agree for demonstration of the quoted model, if needed by the end user.
2
-
-
(iv) 50Kg capacity End Loading drying tumbler Supply , Installation , testing & commisioning of 50Kg capacity, End Loading drying tumbler : TECHNICAL SPECIFICATION FOR HEAVY DUTY DRYING TUMBLER • The machine shall be End Loading type Drying tumbler, 50Kg Capacity dry weight filling per charge
• The minimum dimensions of the Inner Basket shall be 1220mm dia x 965mm depth, corresponding to a minimum volume of 1150 litres
• The inner basket shall be made of stainless steel SS 304 quality with minimum thickness of 16SWG.
• The outer cover shall be made of Mild steel with powder coated with minimum thickness of 16SWG.
• Motor for drive and exhaust shall be minimum of 3.5 HP capacity
• The outer basket shall house an operating control panel with digital temperature controller, timer, push buttons etc. for main supply.
• The machine shall be provided with suitable steam radiotor and to be fitted at the top of outer basket and is designed for maximum utilisation of heat.
• Forward and reverse timer to be provided to allow the basket to rotate in forward direction for few rotations and automatically in reverse direction for few rotations to avoid tangling of linen inside the machine and for a better drying
• Power Supply: 415v, 3Phase, 50c/s, A.C. Supply.
• Self cleaning lint screen of ample size, shall be provided
• A timer for automatic forward-reverse rotation of drive motor is provided in the control panel.
• Auto timed by digital timer with illuminated display of lapse time.
• The machine shall be stop automatically at the end of preset time thus ensuring correct use of dryer.
• Auto-reverse prevents entanglement of linen also ensures faster drying.
• Electrical interlocking of door for drive.
• Dynamically balanced aluminium impeller fan directly mounted on motor shaft.
• The manufacturer should have ISO 9001: 2015 quality management system
• The supplier should agree for demonstration of the quoted model, if needed by the end user.
3
-
-
(v) Calendaring machine Supply, Installation, testing & commisioning of Calendaring machine, Single roll, Electrically Heated, 375mm x 1830mm : TECHNICAL SPECIFICATION FOR SINGLE ROLL FLAT WORK IRONER (CALENDERING MACHINE)
• For pressing of bed sheet, pillow cover, etc.
• The machine shall be Single Roll, Calendaring Machine, feeding & delivery on opposite sides.
• Pneumatic lifting through Air compressor with pressure 8Kg/cm2 and 3 CFM.
• The minimum roll size shall be 375mm dia x 1830mm long,
• Speed of rolls shall be 3 to 6 mtrs./minute.;
• Should have Drive and Exhaust Motor
• Electrical Heater Load: 14.4 KW on 415/440 V AC, 3 phase.
• Two fixed speed / variable speed drive shall be provided
• Roll/s padded with multi layers of Stainless steel Wool & covered with two rounds of Polyester cloth. Stainless steel wool padding ensures longer life of padding & reduces the down-time. Also, it maintains porosity for efficient removal of moisture ensuring wrinkle free ironing.
• Each roll is provided with separate Exhaust Blower Dynamically balanced aluminium impeller mounted directly on motor shaft.
• Metal powder coated Feeding tray & Delivery Table of ample sizes shall be provided.
• Full length Finger Guard is electrically interlocked with drive & pneumatic system.
• The Frame is well protected against corrosion. The Chest is rigidly fixed on the frame with fasteners. The Steam Chamber of the chest has a multi- pass arrangement, which ensures fast and uniform heating of the ironing surface of the chest.
• The padding shall be designed to provide elasticity and hardness to the rolls and thus ensuring even pressing of flat linen.
• The pneumatic control system consists of air filter, regulator, lubricator, pressure gauge, solenoid valves and quick exhaust valves.
• Finger guard shall protects the operator`s fingers from getting crushed between the roller and the chest. The slightest disturbance of the finger guard stops the drive to the rollers and lifts both the rollers away from the chest.
• During operation if power supply fails the rollers lift away from the chest automatically thus protecting the cloths and the roller covers from getting scorched.
• The machine can not iron without compressed air supply ensuring that the safety system is in operation whenever the machine is used for ironing.
• Separate safety pawls are provided for each roller which locks the rollers in the lifted position whenever the power fails and both rollers remain in locked/lifted position even without air after that.
2
-
-
(vi) Flat Bed press Supply , Installation , testing & commisioning of Flat Bed press, 1500x750 : TECHNICAL SPECIFICATION FOR FLAT BED PRESS
• For pressing of trousers, pants, flat linen etc.
• The head opening shall be Pneumatic through Air compressor with pressure 6Kg/cm2 and 3 CFM.
• Size of buck 1500mm x 750mm (60”x30”).
• Electric Connected load: 10.8 KW on 3 phase 4 wires, 440V AC supply;
• The Frame shall be fitted with head, buck and levers.
• The buck shall be padded with one layer of asbestos clothes, one layer of cotton knitted padding/two layers of blanket and covered with cotton cloth • Heating on both HEAD (Top plate) & BUCK (Bottom plate). • Head plate of Stainless Steel shall be Polished / buffed. • Both Head & Buck shall be insulated & covered with powder coated panels. • Head shall remain in UP/OPEN position even without AIR • Metal powder coated work table of ample size. • All panels shall be powder coated.
• Air Filter, Air Pressure regulator with gauge , Lubricator & air inlet valve shall be provided. • The closure of the machine shall be done by pressing of the two hand levers to be provided in the front. The releasing of any of the levers will make the head to open thus ensuring the safety of the operator. • It shall have Pressure Adjusting Device, to suit the requirements of different kinds of fabrics or garments of varying thickness. The unit shall have self aligning system, to give even pressing to uneven thickness of garments • All operations pneumatic & Head closing by simultaneous pressing of two push buttons for operator's safety • Auto timed through Digital Timer --preset time on counter & lapse time by Illuminated display for automatic opening of Head as per preset time. • The manufacturer should have ISO 9001: 2015 quality management system • The supplier should agree for demonstration of the quoted model, if needed by the end user.
1
-
-
(vii) Table mounted Electric Hand Iron Supply, Installation, testing & commisioning of Table mounted Electric Hand Iron :TECHNICAL SPECIFICATION FOR ELECTRIC HAND IRON WITH TABLE
• Heavy Duty electric hand Iron: 1KW
• The electric hand iron shall be manufactured out of gun metal and cast iron.
• Wooden top Table on structural steel frame work.
• The manufacturer should have ISO 9001: 2015 quality management system.
4
-
-
(viii) Wet linen Trolley Supply, Installation, testing & commisioning of Wet linen Trolley GRANDIMPIANTI /CLEANCARE //MPS / NEMR /STERIS / GETTINGE
: -TECHNICAL SPECIFICATION FOR WET LINEN TROLLEY Purpose: To transport / carry the wet linen Description: Complete stainless steel 304 Grade construction for long rust free life. Trolley sides have pressed ribs for extra strength. Corners would be rounded for easy movement and fitted with rubber bumpers to avoid any damage. These trolleys would be mounted with 4 Nos. swiveling type rubber wheels on ball bearings.; These trolleys have a perforated S.S. mesh at the bottom are fitted with a drain valve. The front two castors are fixed type and the rear two are of swivelling type.; Wheels: 4” dia Thread free castors Overall Size: 800mm Length x 600mm width x 710mm height The manufacturer should have ISO 9001: 2015 quality management system The supplier should agree for demonstration of the quoted model, if needed by the end user.
5
-
-
(ix) Dry linen Trolley Supply, Installation, testing & commisioning of Dry Linen Trolley : TECHNICAL SPECIFICATION FOR DRY LINEN TROLLEY Purpose : To carry the dry linen Description : Complete stainless steel 304 Grade construction for long rust free life. Trolley sides have pressed ribs for extra strength. Corners would be rounded for easy movement and fitted with rubber bumpers to avoid any damage. These trolleys would be mounted with 4 Nos. swiveling type rubber wheels on ball bearings., The trolley is designed for light weight, rugged and easy manoeuver. Four castors are provided in the frame.; Wheels: 4” dia Thread free castors Overall Size: 1000mm Length x 600mm width x 810mm height The manufacturer should have ISO 9001: 2015 quality management system The supplier should agree for demonstration of the quoted model, if needed by the end user.
5
-
-
(x) Finish Linen Rack Supply, Installation, testing & commisioning of Finish Linen Rack :TECHNICAL SPECIFICATION FOR FINISH LINEN STORAGE RACK
• Floor mounted, storage rack with five nos. shelves are used to store the linen
• Frame is fabricated of 40mm square Stainless steel 304 Grade pipes.
• The legs are provided with adjustable nylon. Bullet feet.
• The shelves are fabricated of 16 SWG Stainless Steel 304 Grade sheets ground polished to smooth surface. Edges are welded together & polished at corners.
• Overall Size: 1830mm Length x 535mm Width x 1830mm Height
• The manufacturer should have ISO 9001: 2015 quality management system
• The supplier should agree for demonstration of the quoted model, if needed by the end user.
2
-
-
(xi) Air Compressure Supply , Installation , testing & commisioning of Air compressor, 3 HP : TECHNICAL SPECIFICATION FOR
AIR COMPRESSOR
• Air compressor with 160 litres tank
• Motor capacity shall be 3 H.P. Air Compressors with Electric Motor, Electrical Switch Gear and Automatic Control System, Air Receiver, No-heat Air Dryer, Pressure Regulator, interconnecting piping with necessary valves and fittings thereof.
Specifications:
Capacity 14cfm at 8.5 kg/cm2
Drive
Electric Motor 1(one) Nos.
Capacity 3 HP.
Speed 1440 rpm (syn.)
Drive Belt drive
Electricity supply 440 volt, 50 Hz. 3 phase
Starter Star/Delta Control & Switchgear/ L & T with overload protection.
Air Receiver 160 ltr Air Dryer 10 cfm
1
-
-
(xi) Steam Boiler 600 Kg Supply , Installation , testing & commisioning of Steam Boiler 600 Kg NON IBR The boiler should be of coil design
Pressure switch should have one NO-NC point which indicates level of water in feed water tank
Limit switch of the boiler should have NO-NC point which indicates blow down valve open and close
Condition Tic of the boiler should have NO-NC point which indicates the temperature
Boiler should start giving steam in less than 10 minutes time frame
Boiler should have reverse flame design for high turbulence
Boiler should be double jack design
Boiler should have stainless steel inner shell
The manufacturer should have ISO 9001:2015 quality management system
The supplier should agree for demonstration of the quoted model , if need by the and user
Design of the fabrication should be of reversible flame Evaporation capacity of the boiler should be 600kg/hr
The working pressure of the boiler should be minimum 10.54 kg /cm 2
Boiler should have automatic water feeding with minimum capacity of 2 hp branded pump
Mode of combustion in the boiler should be forced draught fully automatic
Boiler should have the minimum efficiency of 90+_2%
Coil pipe used in the boiler should be CS boiler tube, with the minimum thickness of 3.66mm
Inner and outer drum of the boiler should have coil 3 pass design
Boiler shell should have inner side of 75mm thickness insulation with SS sheet lining
Top and bottom cover should have the minimum of 75 mm refractory lining
Boiler should have chimney on the top side of the boiler and chimney should be fully insulated
Diesel tank with minimum capacity of 200 litres and should have the feature of automatic feeding should be supplied by the supplier. Required chiney work for boiler is scope of work.
1
-
-
(xii) Vacuum Table Supply, Installation, testing & commisioning of Vacuum Table : vaccum ironing table
heavy duty electric iron - 1kw
the ironing table should have foam, cloth, antina, spring set, linen rack. table size should be minimum 30''*48''*50''
table motor should be of minimum 1hp with heavy blower on the top of motor for heavy suction the manufacturer should have ISO9001:2015 quality management system
the supplier should agree for demonstration of the quoted model, if need by the and user.
1
-
-
(xiii) MTO dry cleaning 15 kg Supply , Installation , testing & commisioning of MTO dry cleaning 15 kg mto dry cleaning machine (15kg) the machine should have an inner drum of 15kg capacity
inner drum of the machine should be of aisi 304 grade the machine should have a minimum of .37kw capacity the extracting motor should be of minimum 1.5kw capacity minimum inner drum size of the machine should be 700mm*470mm minimum inner drum volume should be 180ltrs machine should have minimum 3 filters for the maximum recovery of the fuel the manufacturer should have ISO 9001:2015 quality management system the supplier should agree for demonstration of the quoted model, if need by the and user.
1
-
-
(xiv) Marble table Supply, Installation, testing & commisioning of Marble table marble table heavy duty electric iron- 1kw table should be made of ss 304 in the bottom and marble surface tablesize should be minimum 30''*48''*50''the manufacturer should have ISO 9001:2015 quality management system the supplier should agree for demonstration of the quoted model, if need by the and user.
2
-
-
(BOQ Schedule 'A' Part-XXXI). (SPECIAL ITEMS) MODULAR OPERATION THEATRE Supply & Installation of Walls of SMS material as per specifications : Walls for Operating Area European CE marked, The framework made of upright ledgers and profiles made of 1.5mm thick galvanized steel sheet. They should folded structural steels with a suitable section for the loads. The structure components be joined together by means of coupling systems in order to create a solid reticular frame, able to support different infill panels of weight is up to 8 Kg/sq the “Z” upright forms the vertical part of the frame and be quipped with proper drilling of 32mm ( height partial drilling) suitable for the panel coupling without suing screws between the prights and edges of the panel there is a suitable PVC adhesive seal with a thickness firm of 3mm to ensure air and dust sealing. At the lower end of the upright an adjustment foot should allow the easy levelling of the structure and, the necessary compression of the ancharge between ceiling and floor. The ledgers should the elements that constitute the basic module of the structure. They should be inserted on the proper hooks by pressure between two uprights, Moreover some “U” profiles , to be placed in horizontal position on the upper and lower part of this structure, constitute its extension with a depth of 64mm together with the metal panels with a thickness of 18mm and the PVC adhesive seal. The structure can be provided with stiffening ledgers or profiles for sliding door fixing and other accessories according to needs. Total thickness of the partition wall:100mm Skin PANELS ( double wall 1 side-partition wall 2 sides): Module skin panels should have a height exceeding 3 mtrs up to a maximum of 3.5m from the floor and a width that should vary from a minimum of 280mm to a maximum of 1200mm”they can be made of different types of finishing; using solid surface material The panels should be made of solid surface material thick 3mm backed by structural panel thick 15mm consisting of a trapezoidal aluminium corrugated core glued between two flat of aluminium sheet. The Solid Mineral Surface (SMS) material should be dent free antibacterial & fire resistant. The Solid Mineral Surface (SMS) should not require any paint & should have in built antibacterial properties.
1
-
-
The material should be manufactured for about two third with aluminium hydroxide and a third with acrylic resin and natural pigments. The aluminium hydroxide should give the product a particular strength and the quality of the acrylic resin ensure should cleanliness, water resistance and colour stability over time. The material should have antibacterial activity (% reduction99%). On the inner sides of the panels thee should slotted holes for their anchorage to the support hooks fixed to the structure uprights, This fastening system should allows obtaining all the following results: The panel should be self centring with consequent joint alignments between panel and panel, ensuring aesthetic balance. The connection between hook and panel should be designed so that the panel, due to its weight, is compressed against the PVC seals coating the entire structure helping to reduce noise transmission. The fixing system of the panels should ensures that there is no accidental breakway of the panel, even If it is subjected to stress for more safety and stability: The connection system should allows disassembling and assembling each panel without moving the others near it. Its flexibility the partition wall should satisfy all the inspection and /or the maintenance needs required by modern workplaces (for example electrical installations, hydraulic installations, medical gases etc.) all the panels can be removed over their entire length and on both sides. The lower part of the panel should be equipped with a profile prepared for the laying and the coupling of the horizontal skirtings that need to re enter with the respect to the panel. The inner angles (which are at 900) in operating rooms or in similar environments should made up of a panel without interruption of continuity that covers the angular area of the wall. The panel should characterized by a double specular folding at 135 0 ( or variable folding according to the requirements). All the panels should be drilled according to specific needs ( ex ventilation grids of the room) The panels should be perfectly sealed together by means of thermoplastic rubber gaskets inserted by pressure and free of projections. Properties & Features of Solid Mineral Surface Material .(1) Density g/cm3 1,7., (2)Hardness (Barcol) 60, (3) Water Absorption % 0,023, (4) Heat Expansion (1 x 10”in/in”/F) 2,1 (5) Ignition Test 38, (6) Tensil Strength, psi 6500, (7) Elongation At Yeld % 0,2, (8), Flexural Strength, 8ft;o,5lb 72D-79000, (9) Water Resistance, g/1000cycl Unbreakable, (10)Lustre Stable Resistance 0,05, (11) High Temperature Resistance Uninfluential, (12) Boiling Water Resistance Uninfluential, (13) Stain Resistance Uninfluential, (14) Chemical Resistance Uninfluential
-
-
-
Supply & Installation of Ceiling of as per specifications The hermetic suspended ceiling should be a loading structure in heavy gauge material forming the frid on which the ceiling panels (made of steel painted material). The modular grid, which can be 600 x 600 mm, or variable, allows the integration of sealed lighting fixtures, air anemostats and / or various service units. The variable module grid should make it possible to adapt the size of the ceiling module to match the equipment to be mounted. It should also allow the use of different module sizes within the same room.The grid should be formed of loading profiles, suspended from the ceiling slab, to which the crossbar profiles are secured by means of rigid mechanical couplings. The thus formed grid should be rigid and remains perfectly stable during all the subsequent site operations.The suspended ceiling should be hermetically sealed by means of silicon gasket application. The function of silicon sealing should be that of assuring an airtight environment in the room and eliminating cervices in which dust could accumulate. The gaskets to be made of non toxic silicon in compliance with regulations applicable to clean rooms - 01 LOT
-
-
-
Planair Ceiling (Plenum box – Air Diffuser) – as per technical specification : The filtering unit should be designed for the controlled diffusion of air filtered through absolute filters for application in hospital with installation in the ceiling above the operating area. 2)Made with panels and filter holding plenum box in stainless steel and frame in natural anodised aluminium. 3)External dimension minimum 2600x2000 should be made with 4 filters of minimum 1220x610 and 2 filters of minimum 915x610 mm. Max flow should be 6500 m3/hour. 4)The plenum box and diffuser should be made in AISI 304 stainless steel. 5)The plenum box of each filter holder should have all connected by a second plenum box in order to have only two connecting point for a easy installation. System should be complete with series of absolute filter providing H14 (EN1882) class filtration and a weighted efficiency of 99.999% in the following standard module: 6) Filter should be made with fire-proof glass microfiber filtering baffle, water repelling, heat sealed yarn. The sealant should bea bi-component polyurethane with a polyurethane seal bonded into a single piece. Range of employ: Maximum temperature 80 °C-Relative humidity 100%-∆Pt final suggested 600 Pa-∆Pt max 1000 Pa
Dimension (mm) -915x610 , 1220x610
Normal flow rate (m3/h) -900, 1200
Filtering surface (m2)- 16.5, 22
Initial Dp at 0.45 m/s (Pa) - 120, 120 - 1 LOT
-
-
-
Double peripheral lights-Indigenous 08 Nos as per technical specification : Peripheral lights of size 600 x 600 mm will be provided with stepped finish aluminium reflector and will be of A class for use in clean room application. The peripheral light diffusers will be constructed from opal prismatic diffuser material in aluminium frames. Light will be generated from high frequency electronic ballast’s complete with colour corrected fluorescent tubes. The ceiling will incorporate supports to secure it to the main structural frame of the modular operating theatre. The laminar flow ceiling will be able to provide integrated lamp support system, ease of maintenance and long life system. Control equipment for the peripheral lighting will be provided in the theatre control panel to allow independent control of the lighting levels by the surgical team.The operation procedures can never be affected by shadows, shimmering lights and dazzling eyes. This has been achieved by the lighting system with sufficient illumination level at the wound site and to provide flicker less design lighting control system Controls for the peripheral lighting will be provided in the theatre control panel to allow independent control of the lighting levels by the surgical team.
-
-
-
Touch Surgeon Control Panel 01 Nos with screen not less 22 "as per technical specification 1) The Control panel can be configured to incorporate all the services that Operation Theatre staff required.
2) The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable.
3) The panel will contain 6 services as follows: a). Time day clock
b). Time Elapsed Clock
c). Temperature & Humidity Indicator d). General/peripheral Lighting control
e). Medical Gas Alarm Panel – upto 6 gases
f) Hepa Filter status
3) All high voltage equipment is installed in a separate enclosure.
4) The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre.
5) All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels.
6) Individual fuses or miniature circuit breakers will protect all internal circuits.
7) All internal wires will be marked with plastic ferrule type cable markers, for ease of identification
-
-
-
X-ray Viewing Screen – 01 Nos, as per technical specification : The theatre will be equipped with a 2-plate X-Ray viewing screen. It will be designed to provide flicker free luminance for the film viewing purpose. It is installed flushed with the theatre wall for hygienic and ease of cleaning purpose. The X-Ray viewing screen is designed for the purpose of front access. The X-Ray viewing screen will be illuminated by 4 pieces of high frequency fluorescent lamps and the dimming will controlled by the usage of dimming ballast with Philips make rotary control. The diffuser is able to diffuse the light evenly and to provide enough luminance for film viewing. It is made of high quality opaque acrylic sheet. The film is held firmly by using spring-loaded clips for ease of mounting and demounting. The body is built by using electrolysed steel with powder coated to BS standards.
-
-
-
Static dissipative Flooring (Tile Form) – (cladding type OT) as per technical specification : The floor finish in the operating room will be 2mm Static dissipative PVC tiles, laid on a semi conductive adhesive base. The floor finish will terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Flooring will fulfil EN 649 of US requirements. It will have chemical resistance as per EN 423 . It will have electrical resistance conforming to EN 1081/IEC 61340. All joints will be welded and the plastic wall finish will overlap the floor coving by 25mm, to provide a continuous sealed surface.A floor screed will be provided, flat to within a tolerance of +/- 3mm over any 3-metre area. Onto this sub floor, a self-levelling compound will be laid prior to laying of the floor finish.The self-levelling compound will be of the type that does not promote bacteriological growth. Copper grounding strips (0.05mm thick, 50mm width) will b laid flat on the floor in the conductive adhesive and connect to copper wire of grounding - 01 LOT
-
-
-
Scrub Station – 01 Nos as per technical specification : The scrub station will be equipped with 2 bay scrub stations. The scrub station will be made of high-grade stainless steel 304 with stain polish finish and wired to the current IEE regulations & BS 7971. The scrub stations control system will be based on advanced microprocessor. The scrub station will be sensor-activated 24VAC. The scrub station will be provided with user selectable time out control. The supply will not be interrupted in case of power failure or maintenance. The station will be equipped with thermostatic mixing valve to control the temperature of hot / cold water supply. The washing faucet will be made of Chrome plated brass hand.
-
-
-
Automatic Sliding Door – 01 Nos as per technical specification size 1500 x 2100 The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
-
-
-
Automatic Sliding Door – 01 Nos as per technical specification size 1000 x 2100 The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
-
-
-
Writing Board with magneting system 01Nos of size:- 1000x700x60mm Deep made out G.P Sheet to be flushed with the wall system complete set as per enclosed tender technical specificationsl. : One Operating List Board should be provided in each Operating Theatre and should be made of Ceramic Magnetic white board. Operating List Board should be flush mounted.
-
-
-
Cascade Pressure stabiliser 01 Nos having muliti 304 grade stainless steel blade to control the room air pressure : Pressure Relief Dampers should be provided in each room to prevent cross contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty area. Counter-weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room. Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance. The PRD should remain closed at pressure below the set pressure and should open fully at pressure only fractionally above the threshold pressure.The body should be epoxy powder coated as per standard BS colors. First class electrolyzed steel plate should be used for body and with high grade SS304 Stainless Steel for bladders.
-
-
-
Storage unit 01 Nos of size 1666 x 865 x 350mm having two shelves & Stainless steel having 5mm thick glass door & mounted flush with the theatre wall. : The storage unit should be made with 1.50 mm thick EGP Zinc coated sheet panels. Storage Cabinet should be divided in two equal parts and each part should have individual glass doors with high quality locking system. Each part should be provided with racks.
-
-
-
View window 01 Nos of size 1000 mm x 1000mm with motorised blinds as per enclosed tender technical specifications.
-
-
-
DIGITAL DISPLAY TOUCH SCREEN 01 Nos of size not less then 30" (WORK STATION) with steel painted outer case as per enclosed tender technical specificationsl. Touch Surgeon Control Panel with screen not less 22 " ·Bidder must submit third party CE certification along with tender documents. Self attested certification not valid.
·The Control panel can be configured to incorporate all the services that Operation Theatre staff required.
·The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable.
The panel will contain 6 services as follows: . Time day clock
. Time Elapsed Clock
. Temperature & Humidity Indicator . General/peripheral Lighting control
. Medical Gas Alarm Panel – upto 6 gases
. Hepa Filter status
. All high voltage equipment is installed in a separate enclosure.
. The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre.
. All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels.
· Individual fuses or miniature circuit breakers will protect all internal circuits.
· All internal wires will be marked with plastic ferrule type cable markers, for ease of identification.
-
-
-
Electrical Wiring inside OT - 01 Lot
-
-
-
OT Light: DOUBLE COMBINATION OT CEILING LIGHT WITH LED TECHNOLOGY marked as per technical specification enclosed :DOUBLE COMBINATION OT CEILING LIGHT WITH LED TECHNOLOGY – 01 Nos marked Approved should have the following Features: Two Major Dome/light head Single Colour Pure White LED,s Reflector based LED Technology Arrangement of LED in such a way that Shadow Free / Deep cavity illimination is achieved Special design to maximize the field of illumination and optimized illumination depth should have good laminar flow properties Easy and less time consumng service access of electronics on the light head dome surface Aluminium Housing for better heat management ESG safety glass for simple and fast disinfection process 360 deg rotation of domes/lightheads / arms for unlimited positioning of light heads MIS Lightning Feature on domes Technical Data of Light Heads: Major (2) Central Illumnination Ec (1mt) 160000 lux x 160000 lux Intensity Range (Lux) 30%-100% Life time of light source (h) /= 50,000 Light Field Diameter (mm) 180-300 Depth of Field L1+L2 (mm) /= 850 CRI (Ra) /=96 R9 /=96 Colour Temp(K) /=4500 Rated Power Output less or equal to 65W at 24V DC Light Head Power Consumption 200 VA+/- 10% Radiant Energy around 3,4mW/m2lx Temp increase 1 deg Power Supply-Primary Voltage(V AC) 90-240 Rotation 360 deg Operating Range /= 1700 mm Adjustment of the spring arm / = 1175 mm Approx wt of each LH /= 18kg Specifications for Centrally Mounted Camera System Should have the following Features: To be mounted on central area of LH should have a wall mounted control Technical Data: Sensor : 1/4" Super HAD CCD ,Lines and Gaps: 768x576 Video standards: PAL Pixels: minimum 444000 Aspect Ratio: 4-3,16-9 Minimum Illumination: 1 Lux S/N Ratio 50 dB Minimum working distance: 10mm/Wide800mm/Tele Power Supply : via LH/ Max 12 W Video outputs: Y/C IT port: RS 232, Zoom 18x optical zoom,4x digital zoom f:4.1-73.8 mm Power Supply: via OR light, max.12 W Image stabilizer Yes Focus Automatic, manual Iris: Automatic, manual White balance: Automatic, manual Should be 30-32” High Definition Progressive Scan Flat-panel Medical Grade Monitors with ceiling mounted spring arm suspension to support high definition/HDTV progressive Scan images and should be able to support and display DVI/HDTV, RGBHV, S-Video, Composite video signals. Aspect ratio 16:9/16:10. Resolution – 1920X1080 or more The flat Panel suspension should be ready with the cables for integration of High Definition Digital (DVI/HDTV), RGBHV (High Resolution), SVHS (S-Video), Composite video signals to travel from the various sources of video like endoscopic camera, room camera, in light camera, high definition flat panel monitors, while assuring native resolution / signal.
-
-
-
OT Light HD Camera 01 Nos
-
-
-
OT Light monitor 01 Nos
-
-
-
OT Table - 01 Nos marked as per technical specification enclosed : 1. Product should be of international quality FDA & CE approved certified ISO 13485:2003 certified. 1. Product should be of international quality FDA & CE approved certified ISO 13485:2003 certified. 2. The five section table top should X-Ray translucent for fluoroscopy with c-arm with radiolucent mattress and facility to load X-Ray cassettes to the table. There should be no metal frame across especially between back and seat section. 3. With remote control the following positions should be possible. a. Table up and down b. Table top longitudinal sliding both cranially and caudially. The total sliding should be atleast 350 mm or better c. Side tilt / lateral left and right d. Trendlenburg and Reverse Trendlenburg. e. Back section up and down. f. Flex / Reflex positioning should be pre-programmed and therefore should be achievable by press of a single button. g. Powered Floors lock and unlock with manual emergency release. h. Auto levelling 4. Radiolucent five section table top in head section, back section, seat section with perineal cut and split leg section. 5. Inbuilt Battery backup about 80-100 operations during power failure 6. Should have Inbuilt override control fixed in the centre column. 7. All metal components of the table should make of aluminium or stainless steel SUS304 with at least two antistatic heavy duty castors. 8. Should have accessory rails on both sides to hold various accessories. 9. Should be suitable for patient load proof at least 270 kg. 10. Self compensating floor locking device. 11. The mattress should be a pressure management pad mattress with at least 80 mm thicknesses. 12.Safety :A. IEC 60601-1:- Medical electrical equipment-Part 1: General requirement for basic safety and essential. Perforation-Edition 3.1; B. IEC 60601-2-46:- Medical electrical equipment-Part 2-46: Particular requirements for the basic safety and Essential Performance-Collateral Standard: Usability-Edition 2.0 IEC 60601-1-6: Medical Electrical Equipment-Part 1-6: General Requirements for Basic Safety and Essential Performance-Collateral Standard Usability-Edition 2.0 Technical data • Height adjustment minimum should be 700 mm or lesser. • Side Tilt 20 deg or more • Back section adjustment 80 deg up and 40 deg down or more. • Leg section adjustment 15 deg up and 90 deg down or more. • Trendlenburg adjustment at least 30 deg. • Extendable head rest 60 deg up and 90 deg down. • Tabletop Width (w/o Side Rails) should be more than 500mm. • The table length (With Extendable head Plate) should be at least 2000mm • Powered longitudinal sliding – 350mm or more, should be possible both head side & leg side. Total long sliding should be more than 110 mm towards leg side and more than 230 mm on head side. Should be supplied with the following accessories: o Padded arm boards o Anaesthesia screen frame with clamps o Restrain strap o Leg crutches o Side rail clamp
-
-
-
MODULAR ICU Supply & Installation of Walls of SMS material as per specifications : Walls for Operating Area CE Marked / UL Listed marked, The FRAMEWORK should be made of upright ledgers and profiles entirely made of a galvanized steel sheet with a thickness of 1.5mm. They should folded structural steels with a suitable section for the loads. The structure components should be joined together by means of coupling systems in order to create a solid reticular frame, able to support different infill panels whose weight is up to 8 Kg/sq the “Z” upright forms the vertical part of the frame and should be quipped with proper drilling of 32mm ( height partial drilling) suitable for the panel coupling without suing screws between the prights and edges of the panel there is a suitable PVC adhesive seal with a thickness firm of 3mm to ensure air and dust sealing. At the lower end of the upright an adjustment foot should allow the easy levelling of the structure and, the necessary compression of the ancharge between ceiling and floor. The ledgers should the elements that constitute the basic module of the structure. They should be inserted on the proper hooks by pressure between two uprights, Moreover some “U” profiles , to be placed in horizontal position on the upper and lower part of this structure, constitute its extension with a depth of 64mm together with the metal panels with a thickness of 18mm and the PVC adhesive seal. The structure can be provided with stiffening ledgers or profiles for sliding door fixing and other ccessories according to needs. Total thickness of the partition wall:100mm Skin PANELS ( double wall 1 side-partition wall 2 sides): Module skin panels should have a height exceeding 3 mtrs up to a maximum of 3.5m from the floor and a width that should vary from a minimum of 280mm to a maximum of 1200mm”they can be made of different types of finishing; using solid surface material The panels should be made of solid surface material thick 3mm backed by structural panel thick 15mm consisting of a trapezoidal aluminium corrugated core glued between two flat of aluminium sheet. The Solid Mineral Surface (SMS) material should be dent free antibacterial & fire resistant. The Solid Mineral Surface (SMS) should not require any paint & should have in built antibacterial properties.
1
-
-
The material should be manufactured for about two third with aluminium hydroxide and a third with acrylic resin and natural pigments. The aluminium hydroxide should give the product a particular strength and the quality of the acrylic resin ensure should cleanliness, water resistance and colour stability over time. The material should have antibacterial activity (% reduction99%). On the inner sides of the panels thee should slotted holes for their anchorage to the support hooks fixed to the structure uprights, This fastening system should allows obtaining all the following results: The panel should be self centring with consequent joint alignments between panel and panel, ensuring aesthetic balance. The connection between hook and panel should be designed so that the panel, due to its weight, is compressed against the PVC seals coating the entire structure helping to reduce noise transmission. The fixing system of the panels should ensures that there is no accidental breakway of the panel, even If it is subjected to stress for more safety and stability: The connection system should allows disassembling and assembling each panel without moving the others near it. Its flexibility the partition wall should satisfy all the inspection and /or the maintenance needs required by modern workplaces (for example electrical installations, hydraulic installations, medical gases etc.) all the panels can be removed over their entire length and on both sides. The lower part of the panel should be equipped with a profile prepared for the laying and the coupling of the horizontal skirtings that need to re enter with the respect to the panel. The inner angles (which are at 900) in operating rooms or in similar environments should made up of a panel without interruption of continuity that covers the angular area of the wall. The panel should characterized by a double specular folding at 135 0 ( or variable folding according to the requirements). All the panels should be drilled according to specific needs ( ex ventilation grids of the room) The panels should be perfectly sealed together by means of thermoplastic rubber gaskets inserted by pressure and free of projections. Properties & Features of Solid Mineral Surface Material .(1) Density g/cm3 1,7., (2)Hardness (Barcol) 60, (3) Water Absorption % 0,023, (4) Heat Expansion (1 x 10”in/in”/F) 2,1 (5) Ignition Test 38, (6) Tensil Strength, psi 6500, (7) Elongation At Yeld % 0,2, (8), Flexural Strength, 8ft;o,5lb 72D-79000, (9) Water Resistance, g/1000cycl Unbreakable, (10)Lustre Stable Resistance 0,05, (11) High Temperature Resistance Uninfluential, (12) Boiling Water Resistance Uninfluential, (13) Stain Resistance Uninfluential, (14) Chemical Resistance Uninfluential
-
-
-
Supply & Installation of Ceiling of as per specifications The hermetic suspended ceiling should be a loading structure in heavy gauge material forming the frid on which the ceiling panels (made of steel painted material). The modular grid, which can be 600 x 600 mm, or variable, allows the integration of sealed lighting fixtures, air anemostats and / or various service units. The variable module grid should make it possible to adapt the size of the ceiling module to match the equipment to be mounted. It should also allow the use of different module sizes within the same room.The grid should be formed of loading profiles, suspended from the ceiling slab, to which the crossbar profiles are secured by means of rigid mechanical couplings. The thus formed grid should be rigid and remains perfectly stable during all the subsequent site operations.The suspended ceiling should be hermetically sealed by means of silicon gasket application. The function of silicon sealing should be that of assuring an airtight environment in the room and eliminating cervices in which dust could accumulate. The gaskets to be made of non toxic silicon in compliance with regulations applicable to clean rooms - 01 Lot
-
-
-
Double peripheral lights-Indigenous 06 Nos, as per technical specification : Peripheral lights of size 600 x 600 mm will be provided with stepped finish aluminium reflector and will be of A class for use in clean room application.
-
-
-
X-ray Viewing Screen 01 Nos, as per technical specification : The theatre will be equipped with a 2-plate X-Ray viewing screen. It will be designed to provide flicker free luminance for the film viewing purpose. It is installed flushed with the theatre wall for hygienic and ease of cleaning purpose. The X-Ray viewing screen is designed for the purpose of front access. The X-Ray viewing screen will be illuminated by 4 pieces of high frequency fluorescent lamps and the dimming will controlled by the usage of dimming ballast with Philips make rotary control. The diffuser is able to diffuse the light evenly and to provide enough luminance for film viewing. It is made of high quality opaque acrylic sheet. The film is held firmly by using spring-loaded clips for ease of mounting and demounting. The body is built by using electrolysed steel with powder coated to BS standards.
-
-
-
Touch Surgeon Control Panel with screen not less 22 "– 01 Nos, as per technical specification 1) The Control panel can be configured to incorporate all the services that Operation Theatre staff required.
2) The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable.
3) The panel will contain 6 services as follows: a). Time day clock
b). Time Elapsed Clock
c). Temperature & Humidity Indicator d). General/peripheral Lighting control
e). Medical Gas Alarm Panel – upto 6 gases
f) Hepa Filter status
3) All high voltage equipment is installed in a separate enclosure.
4) The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre.
5) All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels.
6) Individual fuses or miniature circuit breakers will protect all internal circuits.
7) All internal wires will be marked with plastic ferrule type cable markers, for ease of identification.
-
-
-
Static dissipative Flooring (Tile Form) as per technical specification : The floor finish in the operating room will be 2mm Static dissipative PVC tiles, laid on a semi conductive adhesive base. The floor finish will terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Flooring will fulfil EN 649 of US requirements. It will have chemical resistance as per EN 423 . It will have electrical resistance conforming to EN 1081/IEC 61340. All joints will be welded and the plastic wall finish will overlap the floor coving by 25mm, to provide a continuous sealed surface.A floor screed will be provided, flat to within a tolerance of +/- 3mm over any 3-metre area. Onto this sub floor, a self-levelling compound will be laid prior to laying of the floor finish.The self-levelling compound will be of the type that does not promote bacteriological growth. Copper grounding strips (0.05mm thick, 50mm width) will b laid flat on the floor in the conductive adhesive and connect to copper wire of grounding - 01 Lot
-
-
-
Automatic Sliding Door - 01 Nos, as per technical specification size 1500 x 2100mm The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
-
-
-
Writing Board with magneting system Size:- 1000x700x60mm deep 01 Nos made out G.P Sheet to be flushed with the wall system complete set as per enclosed tender technical specificationsl. One Operating List Board should be provided in each Operating Theatre and should be made of Ceramic Magnetic white board. Operating List Board should be flush mounted.
-
-
-
Cascade Pressure stabiliser 01 Nos having muliti 304 grade stainless steel blade to control the room air pressure : Pressure Relief Dampers should be provided in each room to prevent cross contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty area. Counter-weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room. Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance. The PRD should remain closed at pressure below the set pressure and should open fully at pressure only fractionally above the threshold pressure.The body should be epoxy powder coated as per standard BS colors. First class electrolyzed steel plate should be used for body and with high grade SS304 Stainless Steel for bladders.
-
-
-
Srorage unit 02 Nos of size 1666 x 865 x 350mm having two shelves & Stainless steel having 5mm thick glass door & mounted flush with the theatre wall. The storage unit should be made with 1.50 mm thick EGP Zinc coated sheet panels. Storage Cabinet should be divided in two equal parts and each part should have individual glass doors with high quality locking system. Each part should be provided with racks.
-
-
-
ICU Ceiling Pendent 01 No CE Marked / UL Listed : The supply unit will meet the high standards for a safe and reliable operation in the ICU.
The supply unit will have upgrading capability of new functions for adaptation to future requirements.
All surfaces will be resistant against corrosion and disinfectants.
Colour of painted surfaces: RAL 9002
The functional units of the supply unit will be completely assembled and tested by the manufacturer. Ergonomic, optimized supply unit consisting of the following functional units:
Pendant should had electrical / Pneumatic brakes Ceiling fixture set for installation to concrete ceiling structure.
Ceiling interface for connection of supply unit with electrics and gases delivered from site. Media columns of 800 mm with Provision for terminal units for medical gas supply/gas evacuation, (5 nos), high- and low voltage power supply (10Nos) Workstation components such as shelves (nos), drawers (1 Nos), & one IV rod of 800mm for mounting Syringe pumps • The above shelf could be adequate enough to mount 15” screen Multipara monitor of 15 Kg
• The below shelf could be adequate enough to mount ventilator
• The drawer will be equivalent to shelf size. Will have central rotation facility (Swivel range) at least 3300
Complete unit including intermediate ceiling construction and installation. The previously mentioned functional units will be coordinated mechanically, functionally and ergonomically, thus presenting a complete medical supply unit. Finished floor to bottom edge of suspended ceiling will be 800 mm.
-
-
-
Supply & Installation of partion of curtain with IV track at each bed - 01 Lot
-
-
-
Electrical work inside room, wiring, switches etc and air conditioning not included in items here-in-before to be supply and fix - 01 Lot
-
-
-
MODULAR LABOUR ROOM Supply & Installation of Walls of SMS material as per specifications : Walls for Operating Area imported European CE marked. The framework be made of upright ledgers and profiles entirely made of a galvanized steel sheet with a thickness of 1.5mm. They should folded structural steels with a suitable section for the loads. The structure components should be joined together by means of coupling systems in order to create a solid reticular frame, able to support different infill panels whose weight is up to 8 Kg/sq the “Z” upright forms the vertical part of the frame and should be quipped with proper drilling of 32mm ( height partial drilling) suitable for the panel coupling without suing screws between the prights and edges of the panel there is a suitable PVC adhesive seal with a thickness firm of 3mm to ensure air and dust sealing. At the lower end of the upright an adjustment foot should allow the easy levelling of the structure and, the necessary compression of the ancharge between ceiling and floor. The ledgers should the elements that constitute the basic module of the structure. They should be inserted on the proper hooks by pressure between two uprights, Moreover some “U” profiles , to be placed in horizontal position on the upper and lower part of this structure, constitute its extension with a depth of 64mm together with the metal panels with a thickness of 18mm and the PVC adhesive seal. The structure can be provided with stiffening ledgers or profiles for sliding door fixing and other ccessories according to needs. Total thickness of the partition wall:100mm Skin PANELS ( double wall 1 side-partition wall 2 sides): Module skin panels should have a height exceeding 3 mtrs up to a maximum of 3.5m from the floor and a width that should vary from a minimum of 280mm to a maximum of 1200mm”they can be made of different types of finishing; using solid surface material The panels should be made of solid surface material thick 3mm backed by structural panel thick 15mm consisting of a trapezoidal aluminium corrugated core glued between two flat of aluminium sheet. The Solid Mineral Surface (SMS) material should be dent free antibacterial & fire resistant. The Solid Mineral Surface (SMS) should not require any paint & should have in built antibacterial properties - 01 Nos
1
-
-
The material should be manufactured for about two third with aluminium hydroxide and a third with acrylic resin and natural pigments. The aluminium hydroxide should give the product a particular strength and the quality of the acrylic resin ensure should cleanliness, water resistance and colour stability over time. The material should have antibacterial activity (% reduction99%). On the inner sides of the panels thee should slotted holes for their anchorage to the support hooks fixed to the structure uprights, This fastening system should allows obtaining all the following results: The panel should be self centring with consequent joint alignments between panel and panel, ensuring aesthetic balance. The connection between hook and panel should be designed so that the panel, due to its weight, is compressed against the PVC seals coating the entire structure helping to reduce noise transmission. The fixing system of the panels should ensures that there is no accidental breakway of the panel, even If it is subjected to stress for more safety and stability: The connection system should allows disassembling and assembling each panel without moving the others near it. Its flexibility the partition wall should satisfy all the inspection and /or the maintenance needs required by modern workplaces (for example electrical installations, hydraulic installations, medical gases etc.) all the panels can be removed over their entire length and on both sides. The lower part of the panel should be equipped with a profile prepared for the laying and the coupling of the horizontal skirtings that need to re enter with the respect to the panel. The inner angles (which are at 900) in operating rooms or in similar environments should made up of a panel without interruption of continuity that covers the angular area of the wall. The panel should characterized by a double specular folding at 135 0 ( or variable folding according to the requirements). All the panels should be drilled according to specific needs ( ex ventilation grids of the room) The panels should be perfectly sealed together by means of thermoplastic rubber gaskets inserted by pressure and free of projections. Properties & Features of Solid Mineral Surface Material .(1) Density g/cm3 1,7., (2)Hardness (Barcol) 60, (3) Water Absorption % 0,023, (4) Heat Expansion (1 x 10”in/in”/F) 2,1 (5) Ignition Test 38, (6) Tensil Strength, psi 6500, (7) Elongation At Yeld % 0,2, (8), Flexural Strength, 8ft;o,5lb 72D-79000, (9) Water Resistance, g/1000cycl Unbreakable, (10)Lustre Stable Resistance 0,05, (11) High Temperature Resistance Uninfluential, (12) Boiling Water Resistance Uninfluential, (13) Stain Resistance Uninfluential, (14) Chemical Resistance Uninfluential
-
-
-
Supply & Installation of Ceiling of as per specifications The hermetic suspended ceiling should be a loading structure in heavy gauge material forming the frid on which the ceiling panels (made of steel painted material Imported). The modular grid, which can be 600 x 600 mm, or variable, allows the integration of sealed lighting fixtures, air anemostats and / or various service units. The variable module grid should make it possible to adapt the size of the ceiling module to match the equipment to be mounted. It should also allow the use of different module sizes within the same room.The grid should be formed of loading profiles, suspended from the ceiling slab, to which the crossbar profiles are secured by means of rigid mechanical couplings. The thus formed grid should be rigid and remains perfectly stable during all the subsequent site operations.The suspended ceiling should be hermetically sealed by means of silicon gasket application. The function of silicon sealing should be that of assuring an airtight environment in the room and eliminating cervices in which dust could accumulate. The gaskets to be made of non toxic silicon in compliance with regulations applicable to clean rooms - 01 Lot.
-
-
-
Double peripheral lights-Indigenous – 06 Nos as per technical specification : Peripheral lights of size 600 x 600 mm will be provided with stepped finish aluminium reflector and will be of A class for use in clean room application.
-
-
-
X-ray Viewing Screen 01 Nos as per technical specification :The theatre will be equipped with a 2-plate X-Ray viewing screen. It will be designed to provide flicker free luminance for the film viewing purpose. It is installed flushed with the theatre wall for hygienic and ease of cleaning purpose. The X-Ray viewing screen is designed for the purpose of front access. The X-Ray viewing screen will be illuminated by 4 pieces of high frequency fluorescent lamps and the dimming will controlled by the usage of dimming ballast with Philips make rotary control. The diffuser is able to diffuse the light evenly and to provide enough luminance for film viewing. It is made of high quality opaque acrylic sheet. The film is held firmly by using spring-loaded clips for ease of mounting and demounting. The body is built by using electrolysed steel with powder coated to BS standards.
-
-
-
Touch Surgeon Control Panel 01 Nos with screen not less 22 "– as per technical specification 1) The Control panel can be configured to incorporate all the services that Operation Theatre staff required.
2) The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable.
3) The panel will contain 6 services as follows: a). Time day clock
b). Time Elapsed Clock
c). Temperature & Humidity Indicator d). General/peripheral Lighting control
e). Medical Gas Alarm Panel – upto 6 gases
f) Hepa Filter status
3) All high voltage equipment is installed in a separate enclosure.
4) The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre.
5) All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels.
6) Individual fuses or miniature circuit breakers will protect all internal circuits.
7) All internal wires will be marked with plastic ferrule type cable markers, for ease of identification.
-
-
-
Static dissipative Flooring (Tile Form) 01 Nos as per technical specification : The floor finish in the operating room will be 2mm Static dissipative PVC tiles, laid on a semi conductive adhesive base. The floor finish will terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Flooring will fulfil EN 649 of US requirements. It will have chemical resistance as per EN 423 . It will have electrical resistance conforming to EN 1081/IEC 61340. All joints will be welded and the plastic wall finish will overlap the floor coving by 25mm, to provide a continuous sealed surface.A floor screed will be provided, flat to within a tolerance of +/- 3mm over any 3-metre area. Onto this sub floor, a self-levelling compound will be laid prior to laying of the floor finish.The self-levelling compound will be of the type that does not promote bacteriological growth. Copper grounding strips (0.05mm thick, 50mm width) will b laid flat on the floor in the conductive adhesive and connect to copper wire of grounding
-
-
-
Automatic Sliding Door 01 Nos as per technical specification size 1500 x 2100 The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
-
-
-
Writing Board 01 Nos with magneting system Size:- 1000x700x60 Deep made out G.P Sheet to be flushed with the wall system complete set as per enclosed tender technical specificationsl. One Operating List Board should be provided in each Operating Theatre and should be made of Ceramic Magnetic white board. Operating List Board should be flush mounted.
-
-
-
Cascade Pressure stabiliser 01 Nos having muliti 304 grade stainless steel blade to control the room air pressure Pressure Relief Dampers should be provided in each room to prevent cross contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty area. Counter-weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room. Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance. The PRD should remain closed at pressure below the set pressure and should open fully at pressure only fractionally above the threshold pressure.The body should be epoxy powder coated as per standard BS colors. First class electrolyzed steel plate should be used for body and with high grade SS304 Stainless Steel for bladders.
-
-
-
Srorage unit 02 Nos of size 1666 x 865 x 350mm having two shelves & stainless steel having 5mm thick glass door & mounted flush with the theatre wall. The storage unit should be made with 1.50 mm thick EGP Zinc coated sheet panels. Storage Cabinet should be divided in two equal parts and each part should have individual glass doors with high quality locking system. Each part should be provided with racks.
-
-
-
ICU Ceiling Pendent 01 No CE Marked / UL Listed The supply unit will meet the high standards for a safe and reliable operation in the ICU.
The supply unit will have upgrading capability of new functions for adaptation to future requirements.
All surfaces will be resistant against corrosion and disinfectants.
Colour of painted surfaces: RAL 9002
The functional units of the supply unit will be completely assembled and tested by the manufacturer. Ergonomic, optimized supply unit consisting of the following functional units:
Pendant should had electrical / Pneumatic brakes Ceiling fixture set for installation to concrete ceiling structure.
Ceiling interface for connection of supply unit with electrics and gases delivered from site. Media columns of 800 mm with Provision for terminal units for medical gas supply/gas evacuation, (5 nos), high- and low voltage power supply (10Nos) Workstation components such as shelves (nos), drawers (1 Nos), & one IV rod of 800mm for mounting Syringe pumps • The above shelf could be adequate enough to mount 15” screen Multipara monitor of 15 Kg
• The below shelf could be adequate enough to mount ventilator
• The drawer will be equivalent to shelf size. Will have central rotation facility (Swivel range) at least 3300
Complete unit including intermediate ceiling construction and installation. The previously mentioned functional units will be coordinated mechanically, functionally and ergonomically, thus presenting a complete medical supply unit.
Finished floor to bottom edge of suspended ceiling will be 800 mm.
-
-
-
Supply & Installation of partion of curtain with IV track at each bed - 01 Nos
-
-
-
Electrical work inside room, wiring, switches etc and air conditioning not included in items here-in-before to be supply and fix - 01 Lot
-
-
-
CSSD Stainless Steel racks with 5 shelves, Size: 1830mm length x 535mm width x 1830mm height : technical specifications for stainless steel storage rack with 56 shelves for receiving area • Shall be made of good quality Stainless Steel SS 304; Size: 1830mm L x 535mm W x 1830mm H
• Floor mounted type, storage rack with five shelves to store the medical instruments
• Frame shall be fabricated of 40mm square Stainless steel pipes, legs shall be provided with adjustable nylon Bullet feet; Frame thickness , 14SWG.
• The shelves are fabricated of 16 SWG Stainless Steel sheets ground polished to smooth surface
• Edges are welded together & polished at corners
1
-
-
Stainless steel work table 01 No with two sink. size: 2400 x 650 x 900mm : technical specifications for stainless steel work table with sinks • Complete stainless steel SS 304 body construction, 16SWG thickness.
• Should have good quality water inlet, air inlet valve, drain and overflow connections with manual drain valve, for washing of instruments.
• Shall have provision for attaching spray gun rinser (air / water)
• Separate hot and cold water faucet above each sink
• Shall have Two Sinks made of stainless steel SS 304 quality, 16SWG thickness, are designed in a way to minimize splash, Minimum size of each sink shall be 700 x 440 x 240mm • Shall have an undershelf made of stainless steel SS304, , 16SWG thickness., shelf size: 2355mm Length x 400mm width, fitted at 300mm above floor level
• Frame (square) shall be made of stainless steel SS 304 quality, 14SWG thickness.
• All the joints shall be welded and fine finished
-
-
-
Spray gun riser 01 No with eight attachments : technical specification for spray gun rinser with 8 attachments • Various sizes and shapes of minimum eight attachments made of good quality Stainless Steel to be used for cleaning syringes, catheters, endoscopes, cyst scopes, other instruments and articles used in sterile services.
• Shall be capable for minute jet of spray of compressed air / water
• 1/4"BSP connection with SS breaded Hose • The water/air pressure should be released, regulated and fully controlled by the spray gun trigger.
• Should be suitable to be connected with the wash station with double tank.
-
-
-
Ultrasonic cleaner, 01 No Capacity 30 litres.: technical specificatioon for ultrasonic cleaner • Shall be made of Stainless Steel SS 304 quality, 18SWG thickness of body, door and paneling.
• The Ultrasonic generator and the ultrasonic cleaning bath are built in one integral cabinet with castor wheels
• Shall be designed for ultrasonic generation with PZT transducers for mechanical vibration in the cleaning liquid
• Shall have a minimum volume of 30 liters, with ultrasonic frequency of 30 KHz (+/- 3 KHz), ultrasonic power of 500 Watts
• Transducers: PZT – elements in sandwich form.
• Should be supplied with suitable SS Lid and baskets
• Volume – 30 litres
-
-
-
Washer disinfector 01 No with inbuilt drier, double door, 250-275 litres capacity, Electrical load: 20KW : technical specification for micro processor controlled washer disinfector with inbuilt dryer - double door • Should be made of good quality Stainless Steel and the unit shall have double door stainless steel SS 304 quality, 16SWG thickness. ; All connecting pipes shall be made of good quality stainless steel
• Body and Frame shall be made of Stainless steel 304 quality, 14SWG thickness.
• The external panel shall be made of stainless steel 304 quality, , 18SWG thickness.
• Inner chamber volume shall be 250 to 275 Litres approx. and can handle up to 1200 instruments per hour; • Shall be designed to wash, rinse and drying all kinds of surgical instruments, anesthetic and respiratory tubing, suction devices, bottles and other glassware. • Microprocessor control for all services, programming and statistic functions – three preset programs and process shall be automatically controlled in a time regulated sequence.
• Double wall with insulation to run with minimum sound and heat emission; Shall be provided with Silicon type gasket for door
• Temperature: Washing at 50 to 65 deg.C; Thermo disinfection at 80-90deg.C
• Hot or cold water Spray through rotating arms, Automatic Disinfectant loading through dosing pump
• Effective Drying: The instruments and hoses are dried very thoroughly, inside out. An air particle filter ensures that the drying air is free from particles.
• Shall be fitted with Sensor to detect level in soap tank and easy refilling system, Sensor for water in chamber to avoid dry run, have powerful water circulation pump, four spray arms, dual dosing pump etc. • Electrical load – 20KW, 415 V, AC, three phase & N, 50Hz
-
-
-
Drying Cabinet, 01 No of capacity: 275 litres approx : techical specificaton for drying cabinet • Shall be designed to dry washed surgical instruments, utensils, glassware etc., by hot air blow
• Cabinet casing, door and shelves should be made of stainless steel SS304 quality • Shall be of minimum volume of 275 liters and with 8 shelves kept for drying at a time
• Shall have Double wall construction with insulation between panels to reduce heat losses and noise
• The unit has an adjustable temperature range of 70 – 90 deg C
• Shall be operated on an electrical connection 230V, AC, single phase 50 Hz
-
-
-
Stainless Steel Work table 01 No with undershelf :techical specification for stainless steel work table with undershelf
• Work table for packing of instruments, all smooth ground corners. • Table shall be made of Stainless steel 304 quality, 16SWG thickness.
• It shall have under shelf, made of stainless steel 304 quality , 16SWG thickness. and fixed on the frame.
• Dimension: 1200mm x 600mm x 900mm H
-
-
-
Stainless Steel control and packing table 01 No, of size: 2000mm Length x 1400mm width x 1400mm height : technical specifications for control and packing table
• Shall be made of good quality Stainless Steel SS 304, thickness of 16 SWG
• Shall have minimum two shelves for separation, control and packing of various sets of sterilized goods forwards, clinics, operation theatre etc.,
• Shall have Stainless steel 304 quality 1 no. drawer, 18SWG thickness, underneath the table and also with nylon adjustable leveling bullets for legs
• Shall have provision for electrical connections for sockets of 5 Amps & 15 Amps
• All the joints shall be welded and fine finished.
• Table overall size – 2000mm length x 700mm Width x 1400mm H
-
-
-
Stainless Steel Table mounted Heat Sealing machine 01 No : technical spcification for stainless steel table mounted continuous band sealer • This sealer with conveyor is suitable for small bags packaging and adopts electronic constant temperature control system and speed adjusting transmission mechanism. It can seal plastic films of various materials.
• Temperature Range: 0 – 300oC
• Sealing speed: 0-12mtr/min
• Sealing film thickness: 0.02-0.80mm • Sealing width: 6-15 mm
• Power supply: 220-240 / 50 Hz 1 Phase , • Power consumption 500 W
• Conveyor Loading: 5Kg
• Machine Size: 900mm x 420mm x 660mm
• Table shall be made of Stainless steel 304 quality, 16SWG thickness.
• It shall have under shelf, made of stainless steel 304 quality , 16SWG thickness.
• Table Size: 1200mm Length x 600mm width x 900mm height
-
-
-
Horizontal Rectangular High Pressure High Vacuum Radial Hinge type Double Door Sterilizer, 01 Nos Fully automatic cycle operation with printer, inner chamber size: 450mm width x 450mm height x 1200mm length, 250 litres volume : technical specifiocation for horizontal rectangular high pressure, high vaccum, fully automatic cycle processing, radial hinge type double door steam sterlizer • Steam sterilizer, horizontal Rectangular, with Double Hinged radial door • Inner chamber volume of around 200 to 250 liters with minimum Inner chamber dimensions of 45cm width x 45cm height x 120cm length. • Vacuum pump - Should have inbuilt water-ring type vacuum pump minimum 2HP/3HP to provide pre-vacuum and post-vacuum pulses, to withstand negative pressure and create high vacuum of 26”hg; • The sound level of vacuum pump shall be 80DP and no vibration. Vacuum pump brand shall be New Genre OR Vindi vak. This should also be fitted with suitable stainless steel condenser and pipings.
• Material : Inner chamber - Stainless steel SS 316 quality with a minimum thickness of 6mm; door – Stainless steel SS 316 quality with a minimum thickness of 12 mm; Radial Locking arm-made of Stainless steel SS 304 quality; • Inbuilt steam generator underneath the chamber shall be made of stainless steel SS 304 quality; • All connecting pipes shall be made of good quality stainless steel; Jacket-boiler quality steel; stand-mild steel with anticorrosion paint.
• Electrical immersion type heaters of 18 KW, equipment should be operated on 400-440 V, 3 phase with neutral, AC supply. • Should provide heat resistant SILICON door gasket withstand upto 140oC.
• The sterilizer shall have to draw the water, automatically through a feed water pump, when needed in the inbuilt boiler.; preferably Crompton make water pump
• Insulation of Glass wool thickness shall be 50-75mm. Insulation cover shall be made of good quality stainless steel 304 quality
• Should be provided with pneumatic operated valves and suitable Air compressor.
• Should provide analog gauges for chamber pressure and Jacket pressure;.
• The sterilizer shall be fitted with Pressure switch, Contactor, solenoid valves, pressure transmitter, steam trap, water reading glass, safety valve, plug screen, vacuum drier etc..as needed
• Working temperature of sterilizer is 121oC to 134oC and the corresponding pressure is 1.2 to 2.1 kg/cm2
-
-
-
• Should have microprocessor based controls, with touch screen display; Shall have Minimum of six programmable cycles, Bowie Dick test cycle, Leak test cycle etc., • Preferred make of HMI and PLC: Siemens / Allen Bradley / Mitsubishi • Shall have digital displays of Chamber Pressure, Chamber temperature, Cycle no., Batch no., Time & Date, Alarm indicator, Error code, Low water indicator etc.,
• Shall have validation port • Shall have provision for RS 232 port for data communication, In-built Real Time Clock with date and time • Should be supplied with a suitable Dot matrix printer that will automatically and continuously monitor and record dates, time of day, load, identification no. and operating parameters i.e. temperature, pressure and residence time, through out the length of the autoclave cycles.
• Accessories such as 1 No. Stainless steel SS 316 quality Loading/unloading Carriage and 2 Nos. Stainless steel SS 304 quality transfer trolley, should be supplied.
• The manufacturer / supplier should submit documents like IQ, OQ, DQ, PQ, Hydraulic test certificate, material test certificate, Gauge calibration certificate, master gauge calibration certificate, User manual in English and warranty certificate etc., at the time of commissioning of the sterilizer Horizontal Cylindrical High Speed Instrument sterilizer, Double door, Manual cycle operation 01 No : technical specification for horizontal cylinderical high speed instrument sterlizer (flash autoclave). double door • Shall be floor mounted - The sterilizer shall be manufactured as per IS specifications Mark IS: 3829 (Part-2) and also shall bear the certification.
• Volume of inner chamber – 75 litres to 80 liters; Minimum inner chamber dimensions – 400mm dia x 600mm depth
• Shall have Double door, radial, hinge type with pressure locking safety facility. The door unlocking shall be possible only when the chamber is exhausted.
• Single control through multiport valve to set and select the cycle manually
• Material : Inner chamber - Stainless steel SS 316 quality with a minimum thickness of 4mm; Radial hinge type door – Stainless steel SS 316 with a minimum thickness of 12 mm; Inbuilt steam generator – SS 304 quality; All connecting pipes shall be made of good quality stainless steel; Jacket-boiler quality steel; stand-mild steel with anticorrosion paint
• Working temperature of sterilizer is 134oC and the corresponding pressure is 2.1kg/cm2
• Electrical immersion type heaters of 18KW, equipment should be operated on 400-440 V, 3 phase with neutral, AC supply.
• Should have an auto-feed water pump with controller, that shall draw the water automatically whenever the level of water in the steam generator goes down during operation; preferably Crompton make
-
-
-
• Should provide heat resistant SILICON door gasket withstand upto 140oC.
• Insulation of Glass wool thickness shall be 50-75mm. Insulation cover shall be made of good quality stainless steel 304 quality
• Should provide analog gauges for chamber pressure and Jacket pressure; Necessary calibration certificates to be submitted during supply
• The sterilizer shall be fitted with Pressure switch, Contactor, Non return valve, steam trap, water reading glass, safety valve, dial thermometer, plug screen, vacuum drier etc..as needed
• Documents: user manual in English, Hydraulic test certificate, Material test certificate, IQ, OQ, DQ & PQ documents, Leak Test certificate, Gauge calibration certificate, Master Gauge calibration certificate and Warranty certificate Stainless Steel Table mounted gauze cutting machine 01 Nos: technical specification for stainless steel table mounted gauze cutting machine
• The unit should be fitted on the table formed out of SS304 quality material
• The low profile base plate drastically reduces the fabric distortion & drag.
• The close fitting of the wing of the base plate easily slips under the bottom ply without catching or snagging the cloth.
• The motor cooling fan dissipates heat build-up & directs the hot air-flow away from the operator.
• Operating handle and lever are positioned for maximum convenience.
• Blade can be sharpened by the automatic sharpening unit only when lever is pressed down, ensuring safety.
• Blade size – 200mm.
• Cutting capacity – 165mm
• Power – 230V Ac 50Hz, 0.75HP
• Table top made of stainless steel SS 304 quality, 16SWG thickness and frame made of stainless steel SS 304 quality, 14 swg
• Table Size:900x 600 x 900mm
-
-
-
Stainless Steel table trolley with 2 shelves, 01 Nos of size: 1080 x 550 x 900mm technical specification stainless steel table trolley with undershelf • The trolley is for use in the sterile goods store when batching sterile goods for delivery and also for short internal transport.
• Frame and body made of stainless steel 304 quality, 14SWG thickness and under shelf made of stainless steel SS 304 quality, 16SWG thickness.
• The trolley frame is provided with handle bars for easy movement
• The undershelf is mounted at 300mm above floor level with spacers on the trolley frame. • The shelf is fitted with buffer wheels
• The frame is fixed on 4 Nos. heavy duty castors swiveling castors for easy movement in narrow passage • Size: 1080 x 550 x 800mm
-
-
-
Stainless Steel Closed Distribution trolley 01 No: technical spcification for stainless steel closed distribution trolley
• Shall be made of good quality Stainless Steel SS 304 Base frame and body , 14SWG thickness. • Shall have heavy duty castor wheels with 2 Nos. fixed type and 2 Nos. swiveling type
• Shall have two foldable type door, the doors are designed to fold back against each end
• Shall be fitted with a central locking handle to operate rod at the top and bottom of the door – for opening and locking of the door
• Shall have minimum Two Stainless Steel shelves, 16SWG thickness.
• Size: 1280 x 650 x 1170mm
-
-
-
Stainless Steel racks with 5 shelves, 01 Nos of size: 1830mm length x 535mm width x 1830mm height : technical specification for stinless steel storage rack with 5 shelves for issuing area • Shall be made of good quality Stainless Steel SS 304; Size: 1830mm L x 535mm W x 1830mm H
• Floor mounted type, storage rack with five shelves to store the medical instruments
• Frame shall be fabricated of 40mm square Stainless steel pipes, legs shall be provided with adjustable nylon Bullet feet; Frame thickness , 14SWG.
• The shelves are fabricated of 16 SWG Stainless Steel sheets ground polished to smooth surface
• Edges are welded together & polished at corners
-
-
-
(BOQ Schedule 'A' Part-XXXII). OPERATION AND MAINTENANCE OF INSTALLATION
-
-
-
Maintainence and operation of E/M services operated from MEP (Mech, Electrical & plumbing) Plant Room for MH Yol consist of following equipments:- (a) Main receiving station with 630 KVA Transformer - 03 Nos (b) 500 KVA DG Set-02 Nos and 2000 KVA DG Set -01 No (c) 11KV VCB (01 Incomer and 03 Nos Outgoing)-01 No (d) Operation of all LT panels including rectification of electrical fault (e) HVAC (Air conditioning ) plant room of capacity 300TR including 03 Nos Chiller units, 02 cooling tower, 100KW Hot water Generator -02 Nos including all equipments such as Monoblock pump & motor set, AHU, FCU Axial fan and LT Panels including rectification of fault (f) Ext water services incl operation of sluice valve, checking and rectification of water pipe line leakage installed near MEP Plant room (g) Sewage treatment plant and effluent treatment plant including Equipments i.e Monoblock pump & motor LT Panels incl water storage tank etc. (h) Lifts - 06 Nos with lifts plant room including Equipments, three phase motors, LT panels Etc Shifts consists of electrician - 01 No, GM-01 No, Ref Mechanic - 01 Nos, Lift operator -01 Nos, Helper - 02 Nos
24
-
-
(BOQ Schedule 'A' Part-XXXIII). OPERATION AND COMPREHENSIVE MAINTENANCE OF INSTALLATION
-
-
-
Maintainence and operation of E/M services operated from MEP (Mech, Electrical & plumbing) Plant Room for MH Yol consist of following equipments:- (a) Main receiving station with 630 KVA Transformer - 03 Nos (b) 500 KVA DG Set-02 Nos and 2000 KVA DG Set -01 No (c) 11KV VCB (01 Incomer and 03 Nos Outgoing)-01 No (d) Operation of all LT panels including rectification of electrical fault (e) HVAC (Air conditioning ) plant room of capacity 300TR including 03 Nos Chiller units, 02 cooling tower, 100KW Hot water Generator -02 Nos including all equipments such as Monoblock pump & motor set, AHU, FCU Axial fan and LT Panels including rectification of fault (f) Ext water services incl operation of sluice valve, checking and rectification of water pipe line leakage installed near MEP Plant room (g) Sewage treatment plant and effluent treatment plant including Equipments i.e Monoblock pump & motor LT Panels incl water storage tank etc. (h) Lifts - 06 Nos with lifts plant room including Equipments, three phase motors, LT panels Etc Shifts consists of electrician - 01 No, GM-01 No, Ref Mechanic - 01 Nos, Lift operator -01 Nos, Helper - 02 Nos
36
-
-
(BOQ Schedule 'A' Part-XXXIV). LIFTS. Design manufacture, supply, installation, testing and commisioning of minimum of 20 passenger (1360 Kg) Machine Room Less Gearless Machine, 0.50 M/Sec speed and handing over the same to the owner in satisfactory working condition with A.C. variable voltage and variable freqency (V3F) control microprocessor based, Selective-Collective DUPLEX Control, directional control of cars, scratch free stainless steel (SS) of N-304, 18 gauge hairline finish enclosure, CAR Ventilation, automatic central clear opening car doors minimum of (1300Wx2400D and door opening width 1200mm) suitable for Hospital passenger / goods / service lift CAR Illumination & Fan, Full height infrared safety curtain, centre opening, landing doors and flooring with smooth anti skid surface, strong enough to take the rated load without any deformation or damage, including all approvals by local bodies, state/central statutory bodies, one month trial operation, testing at designed load, safety checks, sudden breaks check, speed check or any other test check as required by Engineer-in-Charge/owner. The cost shall include 24 months free comprehensive maintenance for defect liability period after completion of work and handing over of the lift in satisfactory working condition. The offer shall also include Automatic rescue device (ARD) automatic loading device to be operating with maintenence free batteries as specified by OEM and approved drawings of the lift at nearest floor in case of power failure, and intercom facility as per specifications. Available Clear Lift well as per architectural layouts (2300 W x 3100 D) to serve upto floors ( G+5 FLOORS). Note:- (a) Pre-commissiong test shall be carried out by lift inspector changes to be borne by contractor. (b) Contractor shall submit lift OEM detailed specification / design parametres, construction drags of all compoennets of lifts as per IS-14665 of Part-I of 2000 for approval of Accepting Officer before execution of work.
2
-
-
Design manufacture, supply, installation, testing and commisioning of minimum of 20 passenger (1360 Kg) Machine Room Less Gearless Machine, 0.50 M/Sec speed and handing over the same to the owner in satisfactory working condition with A.C. variable voltage and variable freqency (V3F) control microprocessor based, Selective-Collective DUPLEX Control, directional control of cars, scratch free stainless steel (SS) of N-304, 18 gauge Hairline finish enclosure, CAR Ventilation, automatic central clear opening car doors minimum of (2000Wx1500D and door opening width 1100mm) suitable for Hospital passenger / goods / service lift CAR Illumination & Fan, Full height infrared safety curtain, centre opening, landing doors and flooring with smooth anti skid surface, strong enough to take the rated load without any deformation or damage, including all approvals by local bodies, state/central statutory bodies, one month trial operation, testing at designed load, safety checks, sudden breaks check, speed check or any other test check as required by Engineer-in-Charge/owner. The cost shall include 24 months free comprehensive maintenance for defect liability period after completion of work and handing over of the lift in satisfactory working condition. The offer shall also include Automatic rescue device (ARD) automatic loading device to be operating with maintenence free batteries as specified by OEM and approved drawings of the lift at nearest floor in case of power failure, and intercom facility as per specifications. Available Clear Lift well as per architectural layouts (2300 W x 3100 D) to serve upto floors ( G+3 FLOORS). Note:- (a) Pre-commissiong test shall be carried out by lift inspector changes to be borne by contractor. (b) Contractor shall submit lift OEM detailed specification / design parametres, construction drags of all compoennets of lifts as per IS-14665 of Part-I of 2000 for approval of Accepting Officer before execution of work.
4
-
-
(BOQ Schedule 'A' Part-XXXV). ROADS, PATH, CULVERTS AND HARDSTANDINGS WORKS.
-
-
-
Providing and erecting direction/place identification retro-reflectrorised sign with 10 years warranty, manufacturer as per IRC:67:2018 using type XI ASTM D 4956-09 micro prismatic retro reflecting sheeting fixed over aluminium sheeting, 2mm thick with clause 801.3, supported on stainless steel hollow section post 50mm dia 4mm thick, firmly fixed to the ground by means of properly designed foundation with M-20 grade cement concrete 45x45x60cm, 60cm below ground level including painting all non-reflective faces with epoxy paint two coats over epoxy primer, complete all as specified and directed.
20
-
-
Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic stryene Acryloretrite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engr-In-Charge. The glow stud shall support a load of 13636 Kg tested in accordance with ASTM D4280. The slope of retro-reflective shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I:809 as recommended BS:Part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engr-In-Charge.
1317
-
-
Providing and fixing post delinator made of ABS round body fitted with 2 Nos 100mm dia high reflective reflectors and mounted on MS pipe of 60mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engr-In-Charge.
300
-
-
(BOQ Schedule 'A' Part-XXXVI). SEWAGE DISPOSAL.
-
-
-
Providing and fixing orage colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS: 10910, on 12mm dia steel bar conforming to IS:1786, having minmum cross section as 23mmx25mm and overall minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standerd drawing and suitable to with stand the bend, all as specified.
1035
-
-
RCC precast concrete HD-20, 100mm thick factory made circular manhole cover 900mm dia all as specified and shown on drawing.
207
-
-
(BOQ Schedule 'A' Part-XXXVII). AREA DRAINAGE.
-
-
-
Circular shape manhole cover set 560mm internal diameter HD-20 100mm thickness.
17
-
-
Circular shape manhole cover set 740mm internal diameter HD-20 100mm thickness.
49
-
-
(BOQ Schedule 'A' Part-XXXVIII). SECURITY FENCING AND GATE.
-
-
-
Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia, streched to 6m length, 50 Nos spiral turns per 6m length, spring core wire (2.59mm thick) of high tensile strength of 1620 N/sqmm with tape (0.25mm thick) hot dip galvanised upto 20 microns, weight of each coil 8.50 Kg and fixing the same on existing 'Y' shaped angle iron with 6 horizontal R.B.T (reiforced barbed tape wire stud tied with G.I staple sand G.I clips to retain horizontal clips shall be @ 5 Nos per 2 spiral turns approximate 125 clips per coil including necessary bolts complete all as specified and directed.
80
-
-
(BOQ Schedule 'A' Part-XXXIX). STP & ETP.
-
-
-
SEWAGE TREATMENT PLANT (MBBR Technology )-120KLD Supply, installation, testing & commissioning of120 KLD Sewage Treatment Plant based on attached growth technology using the 'Moving Bed Bio-media Reactor' (MBBR) process. The plant proposed shall be suitable to treat (120 KLD), with tertiary treatment of capacity 120 KLD at present.(Excluding Electro Mechanical equipment Cost such as pumps,filters,blowers measured seperately and paid seperatily.) Nature of effluent - Domestic Sewage from Toilet and kitchen waste. Daily average flow - 120 Cum / Day pH - 6.5 - 8.0 BOD5 - upto 250-350 Mg/L S. Solids - 250 - 400 Mg/L COD - upto 450-600 Mg/L Oil & Grease - 50 Mg / L Effluent Discharge After Filtation pH - 6.5 - 8.5 BOD5 - Less than 10 Mg/L S. Solids - Less than 100 Mg/L COD - Less than 250 Mg/L Oil & Grease: 10 Mg/L
1
-
-
(A) Civil Work - For 120 KLD (i) RCC Screen Chamber capacity 2.16 cum as per approved shop drawing in civil part.(Dim.in mm:1200x1500)effective height-1200. (ii) RCC Grease Chamber capacity 3.42cum as per approved shop drawing in civil part.(Dim.in mm:1200x1900)effective height-1500 (iii) RCC Raw sewage Collection cum Equalization sump capacity 49 m3+1.1m FB(Free boad.) in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:3700x3900)effective height-3400 (iv) RCC MBBR Tank capacity 19.36 m3+ 0.5m FB(Free boad.) in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:2200x2200)effective height-4000 (v) RCC Tube Each jobtler Tank 12.54 m3 in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:1500x2200)effective height-3800+0.7m FB(Free boad.) (vi) RCC Chlorine contact/Filter feed tank capacity 20 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:2500x2200)effective height-3650+FB( Free Boad )0.75 m (vii) RCC Sludge Holding Tank capacity 34 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:3700x2300)effective height-4000+FB (Free Boad)-0.5m (viii) RCC Soft water storage Tank capacity 23.1 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:2500x2200)effective height-4200+ FB (Free Boad)-0.3m (ix) RCC Treated Water Storage tank capacity 25.9 cum complete in all respect in civil paer as per approved shop drawing.(Dim.in mm:2800x2200)effective height-4200 + FB (Free Boad)-0.3m
-
-
-
(B) SEWAGE TREATMENT PLANT: Supply, installation, testing & commissioning of Stainless Steel Perforated Screen with suitable lifting arrangement (approximate size 450 mm wide x 600 mm high) with 10mm & 8mm clear spacing.
2
-
-
Supply, installation, testing & commissioning of digital type level indicator for automatic operation of the complete system with high/low level alarm System. (Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the mentioned components for the complete working of the STP and got it approved by the GE.
(Equalisation Tank, Clarified water Tank, Treated water Tanks etc.,)
1
-
-
Supply, installation, testing & commissioning of non clogging type pumps, having CI casing, CI impeller and SS Shaft complete with all accessories, motor 2850 RPM. Each pump should be operate to a curve required by the operating conditions connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically.
-
-
-
(i) Submersible Pumps in equalisation tank. 2 Nos. (1 working & one standby.)(Solid handling cap. 30-40 mm) Flow rate (each) = 6 m3 / hr. Head = 8-10 Mtr
1
-
-
(ii) Plant room sump pump 2 Nos (1 working + 1 standby ) .Outlet pipe of pump should will be connected to equalisation tank. Flow rate = 10 cum/hr. Head= 15 Mts (Solid handling size for this pump shall be 10 mm). Including Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels/angle section of MS shall be made by the STP contractor.
1
-
-
Supply, installation, testing & commissioning of Non clogging type horizontal centrifugal Sludge transfer / disposal / recirculation pumps (With Tube Setler tank) capable of handling solids upto 7 mm, having C.I. casing, C.I. impeller, SS shaft, IP 55, Class B insulation, mechanical seal complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, (with wiring) to control the level of sump automatically. 2Nos (1w+1stb.) (Solid handling size for this pump shall be 7 mm). Flow rate (each) = 15 m3 / hr. Head = 8-10 Mtr
1
-
-
Complete Air Diffusion System including following: Supply, Installation, testing and commissioning 2 Nos. twin type rotary air blowers capable of delivering approx. 110 cum/hr of free air at 0.6 kg/cm2 (one working & one standby) , driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.
1
-
-
Non clog type air dispersion system capable of handling 3-5cfm of air with oxygen transfer with efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so they can be replaced/repaired easily from platform at the top (fine bubble membrane diffusers)
-
-
-
For equalization tank -1 No.
1
-
-
For sludge holding tank - 1 No.
1
-
-
Floating Aerated Bio-media Reactor - 2Nos. Note : Air dispersion system shall be provided for Equalisation Tank, Sludge holding Tank and MBBR Tanks’.
1
-
-
Supply, installation, testing and commissioning of PVC floating media to be installed in Moving Bed Bio- Reactor - 2 Nos. and PVC tube deck setling media in Secondary Each jobtling Tank for 120 KLD daily sewage flow
1
-
-
Providing fixing testing and commissioning of inline flange mounted electro magnetic flow meter with IP 65 Protection, full base rubber liners, SS 316,electrodes, SS 304 /MS coil housing, ± 0.5% linearity, 24 VDC / 90-250 V, AC 50 HZ, 0to 55 degree celsius as per model selection, suitable for sewage water including all fittings and accessories complete with bye pass arrangement suitable for the required flow rate.
2
-
-
Providing fixing testing and commissioning of field/panel mounted pH meter with ABS weather proof IP 65 enclosure, LED indication for high and low pH ± 2% accuracy front keyboard calibration. pH Range: 0-14.
1
-
-
Providing and fixing single stage, monobloc horizontal, in-line pumps stainless steel , casing & impller- cast iron, pump shaft SS, mechanical seal coupled to a TEFC electric motor, 2900 RPM. Each pump should be operate to a curve required by the operating conditions connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply having IP 55 protection enclosure, vibration eliminating pads etc. complete with base and frame, nuts and bolts and necessary RCC foundations as per requirement and as per instructions
-
-
-
(i) Filter Feed Pumps for Recycled Water available from STP. Capacity : 7 cum/hr Head : 30 M No. of Pumps 2 Nos. (1 working + 1standby)
1
-
-
(ii) Description same as items nos 700 for Irrigation Water Transfer Pump Capacity : 24 M3/hr. Head : 50 M No. of Pumps 2 Nos. (1 working + 1standby)
1
-
-
Supply, installation, testing and commissioning of vertical floor mounted mild steel Epoxy filter of suitable size for required flow and head, provided with an inlet distributor. The vessel is painted externally and internally with epoxy and bitchromon paint with primer with frontal piping & valves, back wash system & filter media etc. complete with standard fittings like cover, pressure gauge at inlet & outlet, sampling cock, rinse drain valve, air vent valve with piping, bolts, nuts & rubber gaskets.
-
-
-
(i) M&L of Multigrade pressure sand filter media Flow rate : 7 cum/hr Filtration velocity : 12 cum/hr/sqm,Shell/Disc thickness : 6/8 mm,Filter Diameter : 900 mm.Frontal Piping : MSEP
1
-
-
(ii) M&L of Activated Carbon Filter Flow rate : 7 cum/hr Filtration velocity : 12 cum/hr/sqm,Shell/Disc thickness : 6/8 mm,Filter Diameter : 900 mm.Frontal Piping : MSEP
1
-
-
Supply, installation, testing and commissioning of Filter Press suitable for 120 kld daily average flow, plate size 18"x18"x17 nos plate manual with screw feed pumps (2 M3/hr at 50 m) 2 nos (1Working+1Standby), with interconnecting piping and poly dosing system of 2 M3/hr @ 50 m head capacity all complete.
1
-
-
Supply, installation, testing & commissioning of U.V. disinfection system suitable for waste water for a flow rate of 7 cum/ hr. approx, 4 No UV lamps (The unit should be suitable for waste water application)
1
-
-
Supply, installation testing and commissioning of chlorine dosing system comprising of dosing pump of capacity 0-6 LPH, suitable for 3kg/sqcm injection pressure chemical grade HDPE dosing tank of 100 Liter capacity.
1
-
-
Providing and fixing all piping (as described below) and isolation control Ball / butterfly valves of required sizes and numbers with all accessories, fittings, supports, clamps,, nuts, bolts, washers, puddle flanges for all tanks, other flanges, NRV's, flow control valves, flow measurement device, for making the system complete in all respects with anti corrosive protection. Valve Mak: Zoloto/Sant/AIP Butterfly Valve : Cast Iron Wafer type butterfly valves Check Valve : Cast Iron body dual plate wafer type check valve (NRV) UPVC pipe : All piping MSEP Pipe : Air grid piping-Submerged/non submerged PVC : Riser Pipe Dia from MBBR Tank-1 to MBBR Tank-2 and from MBBR Tank-2 to TubeEach setler. uPVC (Sch 40) : Pipe for Dewatering Pumps GI : All Submerged pipe for air grid MSEP : Frontal piping for Filter with butterfly valve
1
-
-
ELECTRICAL INSTALLATION FOR STP: M & L for LT feeder pillar box with, installation, testing and commissioning, factory fabricated prewired,, cubical type of appropriate size outdoor type with canopy of appropriate size, dust and vermin proof, made out of 50X50X6mm angle ironFrame/legs and 3.15mm thick CRCA sheet with openable shutters on bothsides (front & rear), powder coatedexternally and internally, having locking arragement mounted on four leg 90cm high (30cm below ground level and 60 cm above ground level ), Panel ,embedded in PCC(1:2:4)type B2 each of size 200X200X300mm complete all specified & directly by Eng.-IN-Charge to accomodate the following: Incoming a) Aluminium bus bar 250A for three phase and neutral duly insulated with sleeves of different color RYB. b) MCCB 160 Amp FP 25 kA-01 Nos. Outgoing MCB TPN 40 Amp-02 Nos. MCB TPN 32 Amp-02 Nos. MCB TPN 16 Amp-2 Nos. MCB TPN 10 Amp-18 Nos. MCB SPN 6-32 Amp-09 Nos. S/D Starter-10.0 HP-02 Nos. DOL Starter-7.5 HP-02 Nos. DOL Starter-5.0 HP-02 Nos. DOL Starter-3.0 HP-02 Nos. DOL Starter-2.0 HP-8 Nos. DOL Starter-1.5 HP-6 Nos. DOL Starter-1.0 HP-2 Nos.
1
-
-
EFFLUENT TREATMENT PLANT 24 KLD (PHYSICO-CHEMICAL PROCESS) SITC of 24 KLD Effluent Treatment Plant based on PHYSICO-CHEMICAL PROCESS. The plant proposed shall be suitable to treat (24 KLD)(Excluding Electro Mechanical equipment Cost such as pumps,filters,blowers measured seperately and paid seperatily.) Civil work only. Nature of effluent - Lab,laundary,OT's etc waste. Daily average flow - 24 Cum / Day Anticipated effluent parameters before treatment: Daily average flow : 24 cubm/Day PH : 5 - 9.0 BOD24 : 2240 - 600 mg/l S. Solids : 240 - 6240 Mg/l COD : 600 - 1240 mg/l Desired Effluent discharge standard after treatment: PH : 7.0 - 8.24 BOD24 : Less than 100 mg/l S. Solids : Less than 100 mg/l COD : Less than 250 mg/l
1
-
-
Civil Work 24 KLD ETP (i) RCC Screen Chamber Chamber capacity 1 cum as per approved shop drawing in civil part.(Dim.in mm:1000x1000)effective height-1000. (ii) RCC Raw sewage Collection cum Equalization sump capacity 15.3 m3+ 0.5m FB in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing (Dim.in mm:2800x2600)effective height-2100. (iii) RCC Batch Reactor 6.75m3+ 0.5m FB in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:1500x1500)effective height-3000. (iv) RCC Tube Each jobtler Tank 4.35 m3+0.6m FB in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing.(Dim.in mm:1500x1000)effective height-2900. (v) RCC Clear Water Storage tank capacity 6.3 cum complete in all respect in civil paer as per approved shop drawing.(Dim.in mm:1500x1500)effective height-2800+ 0.7m FB (Free Boad.). (vi) RCC Sludge Holding Tank capacity 5.85 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:1300x1500)effective height-3000.
-
-
-
Supply, installation, testing & commissioning of Stainless Steel Perforated, Corrugated Bar Screen with suitable lifting arrangement as hook of suitable lifting capacity as required to resist the lifting load.
2
-
-
EQUALIZED WASTE WATER TRANSFER PUMPS FOR ETP
-
-
-
Supply and fixing horizontal, centrifugal sludge recirculation pump. The pumps shall have CI casing, CI Impeller & CS shaft & sleeve with mechanical seal. MSEP common base frame.Pump Capacity 1 m3/hr @ 6-8 m head. (1w+1stb.)
1
-
-
Supply, installation, testing and commissioning Lime, Alum and Poly Electrolyte dosing system
Capacity - 50-100 LPH
1
-
-
Supply, installation, testing and commissioning of PVC tube deck media For ETP to be installed in primary tube tank alongwith suitable sludge removal arrangement.
1
-
-
Supply, installation, testing and commissioning of Filter Press suitable for 24 kld daily average flow, plate size 12"x12"x12 nos plate manual with screw feed pumps 2 nos (1Working+1Standby), 0.5HP with interconnecting piping and poly dosing system of 1 M3/hr @ 30 m head capacity all complete.
1
-
-
Interconnectiong Pipelines, valves & fittings for hospital waste water pretreatment for making system complete.
1
-
-
ELECTRICAL INSTALLATION FOR ETP :Supply, installation, testing and commissioning of LT feeder pillar box with, installation, testing and commissioning, factory fabricated prewired,, cubical type of appropriate size outdoor type with canopy of appropriate size, dust and vermin proof, made out of 50X50X6mm angle ironFrame/legs and 3.15mm thick CRCA sheet with openable shutters on bothsides (front & rear), powder coatedexternally and internally, having locking arragement mounted on four leg 90cm high (30cm below ground level and 60 cm above ground level ), Panel ,embedded in PCC(1:2:4)type B2 each of size 200X200X300mm complete all specified & directly by Eng.-in-Charge to accomodate the following:- Incoming a) Aluminium bus bar 63A for three phase and neutral duly insulated with sleeves of different color RYB. b) MCCB 40 Amp FP 16 kA-01 Nos. Outgoing MCB TPN 10 Amp-6 Nos. MCB SPN 6-32 Amp-03 Nos. DOL Starter-2.0 HP-2 Nos. DOL Starter-1.0 HP-4 Nos.
1
-
-
(BOQ Schedule 'A' Part-XL). INTERNAL WATER SUPPLY.
-
-
-
S&F for Bib taps 15 mm bore fancy type chromium plated long body of shank, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
300
-
-
S&F for chromium plated elbow operated tap of 15 mm dia all as specified and directed.
400
-
-
S&F for brass chromium plated wall mixer of 15 mm dia for hot and cold all as specified and directed.
200
-
-
S&F for wall hung brass chromium plated soap dispenser of capacity exc. 0.5 Ltr with touchless activation built-in-smart infra red sensor senses fixed with stainless steel screws complete all as specified and directed.
50
-
-
S&F for electronic hand drier through flow discharge, vaccum type motor/blower combination, infrared optical sensor with 35 second lockout feature heating element made of nichrome wire fixed with stainless srews to wall all as specified and directed.
50
-
-
Construction of underground tank of capacity 140 KLD all as specified and shown on drawing.
2
-
-
Demolition and dismantling works/Credit Works as listed in Schedule 'A' Part-XVII has been attached in tender in PDF format and the amount of Schedule i.e Rs. 6225932.10 shall be deducted from the total amount of BOQ to arrive at the contract sum.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements