Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date31 Aug 2024
Closing Date27 Sep 2024
Tender Amount₹ 48,00,000
Costs
EMD
₹ 96,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_669328_1Bid Award Id
ViewTender No
GE/Y-61/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Taking down shutters of any description not exc. 1 Sqm each and removing from site, complete all as specified and directed.
18
-
-
Dismantling plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.
300
-
-
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
250
-
-
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
50
-
-
Dismantling wrought iron or mild steel work of any description, complete all as specified and directed.
5
-
-
Rolled Mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed.
500
-
-
Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed.
400
-
-
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
20
-
-
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, complete all as specified and directed.
150
-
-
Aluminium anodized snap grid frame work of size 605 mm x 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer's catalogue/instruction), cutting holes for electrical fittings fixed on an including aluminium tee of size 25mmx25mmx1.50mm as main runner, aluminium tee of size 25mmx25mmx1.25mm as cross runner and aluminium angle of size 25mmx25mmx1.25mm at the perimeter suspended from soffit at approx 900mm centre to centre with hangers 6mm dia galvanized (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanized iron flat 40mmx3mm size, 60mm long and expansion hold fasteners 12.50mm dia, 40mm long including necessary scaffolding, complete all as specified and directed.
150
-
-
6mm thick non asbestos fiber cement building boards 600x600mm (Decorative E Board) as in ceiling fixed or laid/ inserted to timber/GI / aluminium framework fixed with nails and applying three coats of white wash, complete all as specified and directed.
150
-
-
Dismantling timber scantlingsin fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, framed or unframed work, complete all as specified and directed.
100
-
-
Second class hardwood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 13 & n. exc 25 sqcm, complete all as specified and directed.
125
-
-
Dismantling boarding, any discription fixed in any postion with nails, complete all as specified and directed.
105
-
-
S&F HDHMR board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber frame work as on wall panelling cup boards shutters (sliding or fixed), complete all as specified and directed.
50
-
-
S&F 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame-work, complete all as specified and directed.
55
-
-
Demolition of stones or brick masonry, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc., complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
5
-
-
Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
5
-
-
Disconnecting existing tanks and removing to store water tanks of capacity n.exc 500 ltr, complete all as specified and directed.
20
-
-
Disconnecting existing tanks and removing to store water tanks of capacity 500 to 1000 ltr, complete all as specified and directed.
10
-
-
Rotational moulded polyethylene water storage tank (three layered, cylinderical vertical with closed top) of capacity 500 Litres hoisted and fixed in position including ball brass valves, high pressure, with polythene float and flynut 20mm bore and making connections with existing water supply line, complete all as specified and directed.
20
-
-
Rotational moulded polyethylene water storage tank (three layered, cylinderical vertical with closed top) of capacity 1000 Litres hoisted and fixed in position including ball brass valves, high pressure, with polythene float and flynut 20mm bore and making connections with existing water supply line, complete all as specified and directed.
10
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
30
-
-
Plain cement concrete M-15, nominal mix, type B-0, using 12.50mm graded mechanically crushed stone aggregate as in floors, 25mm thick, surface finished even and fair to receive top surface, complete all as specified and directed.
480
-
-
Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved).
105
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
210
-
-
Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement(1:2) with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in kitchen platform, window cill /steps laid over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed.
25
-
-
Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile exc. 0.36 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
200
-
-
Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile exc. 0.36 Sqm, in vertical surfaces such as skirting and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.
20
-
-
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 10mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
150
-
-
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 10mm thick (Square/ rectangular) area of each tile not exceeding 0.38 sqm, as in skirting, dado etc . set and jointed in neat cement slurry and includingincluding 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed.
15
-
-
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 10mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.
75
-
-
Glazed coloured tiles of size 350x250/450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.
150
-
-
Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.
400
-
-
Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on other than fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.
150
-
-
Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement with WPC, complete all as specified and directed. Note :- water proofing compound shall be measured and paid separately
200
-
-
Rendering cement plaster 5mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.
50
-
-
Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty, complete all as specified and directed.
140
-
-
Preparation of newly plastered wall surfaces and appling two coats of cement base paint over a coat of white wash, complete all as specified and directed.
220
-
-
Three coats of white wash on newly plastered or previously undecorated surfaces of ceiling including preparation of surfaces, complete all as specified and directed.
50
-
-
Supply only integral water proofing compound (ISI marked) or approved brand.
15
-
-
Three coats of white wash on newly plastered or previously undecorated surfaces of wall including preparation of surfaces, complete all as specified and directed.
90
-
-
Pressed steel frames of size 105x60x1.25mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
40
-
-
Pressed steel frames of size 125x60x1.25mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
40
-
-
M&L for PCC 1:3:6 type C-1 with using 20mm graded stone aggregate as in bed block, bed plates etc. For embedding hold fasts etc. complete all as specified and directed.
0.3
-
-
Factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled 35mm thick shutters without interlocking rail and with one panel and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
38
-
-
Factory made second class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed.
22
-
-
30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
15
-
-
Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 160 of MES SSR 2010 Part-II, complete all as specified and directed.
50
-
-
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as specified and directed.
20
-
-
Plain cement concrete M-15, nominal mix, B-0 using 12.50mm graded mechanically crushed stone aggregate as in lintels upto 1.50 metre clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounde or chamfered angles and throating, complete all as specified and directed.
Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.
0.45
-
-
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, fixed in repairs, complete all as specified and directed.
45
-
-
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, complete all as specified and directed.
12
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and removing from site, complete all as specified and directed.
10
-
-
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete and providing and fixing new one, complete all as specified and directed.
15
-
-
Sheet glass 4mm thick ordinary quality and glazing with oil putty wooden beads in squares, not exc. 0.5 sqm in each pane, complete all as specified and directed.
22
-
-
Figured glass, pin head type 4mm thick and glazing with oil putty/ wooden beads in squares, not exc. 0.5 sqm in each pane, complete all as specified and directed.
3
-
-
Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, fixed, complete all as specified and directed.
60
-
-
Extruded aluminium alloy handles, (ISI marked), fabricated type, anodised, of size 150mm, complete all as specified and directed.
60
-
-
Butt hinges (ISI marked), medium weight, cold rolled, stainless steel 100mm long, complete all as specified and directed.
75
-
-
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed.
18
-
-
Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 100mm, fixed, complete all as specified and directed.
60
-
-
Extruded aluminium alloy handles, (ISI marked), fabricated type, anodised, of size 100mm, complete all as specified and directed.
45
-
-
Butt hinges, (ISI marked), medium weight, cold rolled, stainless steel 75mm long, complete all as specified and directed.
21
-
-
Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed.
90
-
-
Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, complete all as specified and directed.
60
-
-
Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed complete, including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets with including 32mm dia PVC long bend flush pipe 90cm long pipe, fixed in repair, complete all as specified and directed.
20
-
-
Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with PVC ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20mm graded crushed stone aggregate complete all as specified,including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe, fixed in repair, complete all as specified and directed.
10
-
-
Wash basins, Vitreous China coloured (oval type) size 435mmx505mmx180mm, excluding tap etc. including cast iron brackets duly painted including cutting and pinning in ends and making good disturbed surfaces in cement mortar 1:3 as well as matching with existing with 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and union for discharge pipe, waste, chain and plug and porcelain stopper, chain and plug, PVC 32mm dia flush pipe and all accessories and fixed in repairs, complete all as specified and directed. Make:- Cat Part No KUS-WHT-35601 of 'Jaquar' or equivalent in makes mentioned in Appendix 'C').
10
-
-
Wash basins, Vitreous China (Flat back or angle back type) size 550mmx400mm including 32mm dia waste fittings, brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed with provision of Pillar taps, fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and directed.
15
-
-
32mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/Sqcm fixe to wall etc including short lengths, with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good, complete all as specified and directed.
50
-
-
Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.
105
-
-
Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.
45
-
-
Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed.
105
-
-
Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor/ sunken floor spout, complete all as specified and directed.
45
-
-
Chromium plated brass over head shower rose, 150mmx150mm size, square shape, single flow with rubit cleaning system, fixed in repair, complete all as specified and directed. Make:- Cat Part No OHS-CHR-35495 of Jaquar or equivalent make mentioned in Appx 'C'.
25
-
-
Stop valve, cast copper alloy, fancy type chromium plated, with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed. Make:- Cat Part No CON-083KN/CON-089KN of Jaquar or equivalent make mentioned in Appx 'C'.
30
-
-
Stop/Angle valve, cast copper alloy, fancy type chromium plated, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed. Make:- Cat Part No CON-053KN/CON-059KN of Jaquar or equivalent make mentioned in Appx 'C'.
20
-
-
Bib taps with flange, 15mm bore, cast copper alloy with crutch or butterfly handle, chromium plated fancy type, screwed down, high pressure screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and directed. Make:- Cat Part No OPL-15037/VGP-81037 of Jaquar or equivalent make mentioned in Appx 'C'.
50
-
-
Pillar tap 15mm bore, cast copper alloy, fancy type, single lever basin mixer witout pop up system with 450mm long braided hoses and base flange for iron pipe and fixed in repair, complete all as specified and directed. Make:- Cat Part No KUB-350511FB of Jaquar or equivalent make mentioned in Appx 'C'.
30
-
-
15mm bore, Brass, chromium plated wall Mixer With hand shower for mixing hot or cold water, screwed for iron pipe, fixed in repair, complete all as specified and directed. Make:- Cat Part No FUS-29267 of Jaquar or equivalent make mentioned in Appx 'C'.
25
-
-
Chromium Plated, toilet Paper Holder of stailess stell with rod and Flap, fixed in poistion with chromium plated (CP) brass screws, fixed in repair, complete all as specified and directed.
25
-
-
Brass Chromium Plated, tubular towel rail, 19mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified and directed.
25
-
-
Soap dish, chromium plated, fixed to plugs with chromium plated, brass screws and fixed in repair, complete all as specified and directed. Make:- Cat Part No ACN-1131N of Jaquar or equivalent make mentioned in Appx 'C'.
25
-
-
Waste coupling PTMT, bore dia of discharge pipe 32mm (half or full threaded) (minimum wt 32mm-45gms), complete all as specified and directed.
15
-
-
PVC connection 15mm size with PTMT nuts at boths end 600mm long and fixed in repair, complete all as specified and directed.
15
-
-
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed with chromium plated brass screws, complete all as specified and directed. Make:- Cat Part No ACN-1173N of Jaquar or equivalent make mentioned in Appx 'C'.
30
-
-
Supply and fixed in repair PVC valveless, crystal white, syphonic action type flushing cistern 10 litres capacity, superior quality, low level with inlet, ball valve, float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long snd 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed, complete all as specified and directed. Make:- Cat Part No 2602 of Cera or equivalent make mentioned in Appx 'C'.
30
-
-
Metal finish fancy type curtain rod 25mm dia including brackets, globes, cleats, fixed to walls, fixed in repair, complete all as specified and directed.
80
-
-
600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers and fixed in repair, complete all as specified and directed.
40
-
-
Brass Chromium Plated, tubular towel rail, 60cm long without lower hangers, fixed in repair, complete all as specified and directed. Make:- Cat Part No CAN-1181FHN of Jaquar or equivalent make.
28
-
-
20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
15
-
-
20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.
20
-
-
25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.
20
-
-
20mm bore Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions including 1 No. 20mm union cutting, threading existing GI pipe at a level of 1.8m, and fixed in repairs complete, complete all as specified and directed.
20
-
-
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 110mm including fixing adjustable clamps complete, complete, including taking up or down old pipe, complete all as specified and directed.
200
-
-
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 75mm including fixing adjustable clamps complete, complete, including taking up or down old pipe, complete all as specified and directed.
200
-
-
PVC (SWR) bends any radius, 110mm bore jointed with solvent cement and fitted with oval access door, complete all as specified and directed.
10
-
-
PVC (SWR) bends any radius, 75mm bore jointed with solvent cement, complete all as specified and directed.
10
-
-
PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, jointed with solvent cement, provided with oval access door, complete all as specified and directed.
10
-
-
PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, jointed with solvent cement, provided with oval access door, complete all as specified and directed.
10
-
-
PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified and directed.
15
-
-
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, fixed in repair, complete all as specified and directed.
30
-
-
15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed fixed in repair, complete all as specified and directed.
15
-
-
Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm, fixed in repair, complete all as specified and directed.
20
-
-
40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.
15
-
-
Aluminium handles (ISI marked), cast type, anodised of size 75mm, complete all as specified and directed.
15
-
-
Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 125mm, complete all as specified and directed.
15
-
-
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 30mm, complete all as specified and directed.
42
-
-
Mortice lock, brass, vertical type, size 100 mm, 4 lever, fixed into aluminium door shutter, complete all as specified and directed.
9
-
-
Sheet glass 5.5mm thick ordinary quality and glazing with glazing clips, ruber neoprene packing, aluminium beads in squares, not exc. 0.50 sqm in each pane, complete all as specified and directed.
15
-
-
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, complete all as specified and directed.
5
-
-
Aluminium (diecast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed.
25
-
-
Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick cement rendering in two layers of 10mm each (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs etc, complete all as specified and directed.
20
-
-
Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 26/13. Make : As per Appendix 'C'.Note:- (i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.
50
-
-
S & F for telescopic channel, 1mm thick, fixed to wooden sliding shutter of cup boards, kitchen racks/drawers etc with suitable size cadmium screws, complete all as specified and directed.
30
-
-
Magnet catcher with magnet for cupboards, complete all as specified and directed.
30
-
-
Steel plate rack of size 600mmx750mmX250mm made of stainless steel 0.60mm thick fixed with plugs, washers and steel screws including fixed in wall with screws ands PVC sleeve of required or fixing arrangement complete and fixed in repair, complete all as specified and directed.
18
-
-
Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long easy flex in chrome finish tube and wall hook, fixed in repair, complete all as specified and directed. Make:- Jaquar, Cera, Prayag
50
-
-
PVC toilet cabinet of size 350x450mm with shelf assembly including mirror mounted shutter, fixed to wall with screws etc, complete all as specified and directed. Make:- Cat Part No 551 of Prayag or equivalent make.
17
-
-
Jet spray stainless steel fixed in repair, complete all as specified and directed. Make:- Jaquar, Cera, Prayag
18
-
-
S&F 20mm dia stainless steel curtain rails with fixing and brackets, stops, rollers and fixed to walls, fixed in repair, complete all as specified and directed.
250
-
-
Water profing treatement of sunken portion/water tank/terrace/padding using high solid content single component water based liquid applied elastomeric water proofing membrene as ASTMC 836 and ASTMD 6083, thickness of the memberane shall be 1.5mm, having solid content of more than 80% elongation of 500+(-) 50% laid over reinforcing layer on non woven geo-textile mesh of 40/50 50gms, including applying self primer coat by diluting with 1:1 ratio @ 0.20 kg per sqm and suface preparation including cleaning of existing treatement and 10mm thick plaster including water proof compound as per manufacturer instructions, complete all as per specified and directed by Engineer-in-Charge.
400
-
-
Taking down aluminium door shutter n. exc 2 Sqm each, taking out servicable glass panes, hydraulic door clocer, but hinges, double action hydraulically regulated floor spring and other fittings, if required carefull and refixing in the same opening after repairs of unserviceable or loosened joints/cleats of top rail/bottom rails/lock rails and styles etc and fixing old serviceable glass, any thickness with rubber packing and aluminium beadings, fixing of old servicable hydraulic door closer, double action door spring duly oiling/greasing and fixing all servicable fitting, complete all as directed by Engr-in-Charge.
NOTE;- Unservicable door closer, double action floor spring, glass panes and other fittings etc shall be replaced and paid under separate items of schedule.
10
-
-
Natural colour 15 micron anodized aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM. (b) Shutter top member 83.50 x 44.45 x 1.70 mm weighing 1.243 Kg/RM. (c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM. (d) Shutter lock rail 83.50x44.45x1.70mm weighing 1.243 Kg/RM. (e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm. (f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.60 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-1 using 12.5mm graded stone aggregate to fix hold fasts all as directed. Note:- (i) Shutter shall be fixed with heavy floor spring ISI marked and pivot, brass lock with duplicate keys.
6
-
-
Natural colour 15 micron three track sliding anodized aluminium window chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing window handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a) Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881Kg/RM. (b) Shutter top member 47.62 x 44.45 x 1.14 mm weighing 0.607 Kg/RM. (c) Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM. (d) Natural colour 15 micron anodised aluminium anodised frame of chowkhat of section 85.00x44.45x1.80mm weighing 1.302 Kg/RM, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed. (e) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (f) The size of Anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and aluminium anodised aluminium tower bolt of size 100mm (02 Nos).
8
-
-
Disconnecting existing PVC/ferro cement/MS tanks capacity exc.250 litres but n. exc 500 litres, for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed by Engr-In-Charge.
70
-
-
Disconnecting existing PVC/ferro cement/MS tanks capacity exc.500 litres but n. exc 1000 litres, for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed by Engr-In-Charge.
35
-
-
M&L for sunken slab treatment comprising of following:- (a) Taking out/down old existing sunken slab treatment including tiling, PCC and cleaning the old RCC surfaces of sunken slab including removal of the rubbish out of campus complete all as specified. (b) M&L for 25mm thick PCC type B-1 using 20mm graded stone aggregate over cleaned sunken slab surfaces. (c) M&L for applying bitumen priming coat/tack coat over PCC @ 0.30 Kg/Sqm. (d) M&L for 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15cm end lap torch sealed and bound. (e) M&L for applying bitumen grade 85/25 over primer coat @ 1.20 Kg/sqm. (f) M&L for 25mm thick plastering (in two layers 15mm 1st layer, 10mm second layer) in CM 1:4 mixed with liquid water proofing admixture as per manufacturer instructions over 225mm thick PCC 1:4:8 using 40mm graded stone aggregate complete all as specified and directed by Engr-In-Charge.
19
-
-
Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including light fiitings any type, switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, tube light fitting, regulator etc. and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed.
270
-
-
Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed.
15
-
-
Point wiring with 1.50 Sqmm copper conductor FRLS (Multi strand) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduit medium grade, ISI marked of suitable size with all fittings/ accessories such as bends, cross, elbow, tees etc. of suitable size and also including PVC insulated ISI marked unsheathed 1.50 Sqmm copper multistranded conductor, 1100 volts grade FLRS as phase, neutral and earth wire connected to common earth dolly and including concealed MS pressed steel (modular sunken box) of suitable sizes terminal boxes made from 1.60mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. and modular cover plate as top cover (ISI marked) for one light point or one fan/exhaust fan point or one bell point, independent, controlled by one way switch/ push button complete all as specified and directed. Note:- (i) Wiring colour code i.e Red/Yellow/Blue for phase, Black for neutral and Green for earth shall be maintained. (ii) Point wiring is considered for modular switches and sockets. Rate of metallic sunken box and other connected accessories required for modular point wiring included in quoted rates. (iii) Rate of modular switch and sockets will be paid seperately under relevant item.
100
-
-
All as per serial item No '135' above, but for one 3 pin 5 Amps socket outlet on the same board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.
10
-
-
All as per serial item No '135' above, but for one 3 pin 5 Amps socket outlet on the independent board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.
10
-
-
All as per serial item No '135' above, but for 3 pin 15 amps socket out let on independent with 2.50 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.50 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed.
10
-
-
All as per serial item No '135' above, but for one light point controlled by two way switchs.
5
-
-
M & L for point wiring with 1.50 sqmm (Nominal Area) FRLS PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including PVC junction box /MS pressed steel cadmium plated terminal box not less than 1.60 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated hylam sheet top cover (ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.50 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/ fan point controlled by one switch Note : (i) Wiring Colour code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained.
(ii) Chase cutting if required shall be measured and paid separately under relevant items in this schedule.
100
-
-
All as per serial item No '140' above, but for one 3 pin 5 Amps socket outlet on the same board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.
10
-
-
All as per serial item No '140' above, but for one 3 pin 5 Amps socket outlet on the independent board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed.
10
-
-
All as per serial item No '140' above, but for 3 pin 15 amps socket out let on independent with 2.50 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.50 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed.
10
-
-
All as per serial item No '140' above, but for one light point controlled by two way switchs.
5
-
-
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
50
-
-
Supply and fix modular switch piano flush type one way 6 Amps, 1 module, 230V, Fixed, complete all as specified and directed.
240
-
-
Supply and fix modular switch piano flush type one way 16 Amps, 1 module, 230V, Fixed, complete all as specified and directed.
20
-
-
Supply and fix modular switch piano flush type two way 6 Amps, 1 module, 230V, Fixed, complete all as specified and directed.
10
-
-
S&F Modular socket 6 Amp 3 Pin, two module 230 Volts, complete all as specified and directed.
40
-
-
S&F Modular socket 6/16 Amp 5 Pin, two module 230 Volts, complete all as specified and directed.
20
-
-
Supply and fix modular bell switch 6 Amps, 1 module Fixed, complete all as specified and directed.
5
-
-
S&F Modular fan regulator step type 100 Watt one module 230 volts, complete all as specified and directed.
5
-
-
Ceiling rose, surface type 3 terminals 65x20mm, fixed in repair, complete all as specified and directed.
150
-
-
Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, fixed in repair, complete all as specified and directed.
10
-
-
Supply and fixed in repair LED Bulb 9 watt, cool/warm white 6500K/3000K, suitable for base B22/E27, 230V, complete all as specified and directed.
10
-
-
Supply and fixed in repair LED invertar Bulb 12 watt, cool/warm white 6500K/3000K, suitable for base B22/E27, 230V, complete all as specified and directed.
10
-
-
Supply and fix in repairing LED Adore 2.8 W having base suitable for B22/ E27/ E14 holder CDL Candle Lamp, WW/ CDL, 6500/3000 K, 230 volts complete all as required at site and directed by Engr - in - Charge. Make:Havells / Polycab/Bajaj /CG
5
-
-
Supply and fix in repair modular Bell Push with indicator 6 Amps, 1 module including all As per existing make complete all as specified and directed by Engr-in- Charge.
5
-
-
Supply and fix in repair modular step type fan regulator, 2 Module including all As per existing make complete all as specified and directed by Engr-in- Charge.
5
-
-
Supply and fix modular cover plate with frame, 1 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
20
-
-
Supply and fix modular cover plate with frame, 3 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
30
-
-
Supply and fix modular cover plate with frame, 8 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
50
-
-
Supply and fix modular cover plate with frame, 10 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
20
-
-
Supply and fix modular cover plate with frame, 12 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
10
-
-
Single pole and neutral sheet metal enclosure with a two pin and earth plug top and socket complete with one double pole MCB 20 Amps, fixed in repair, complete all as specified and directed.
5
-
-
Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 8 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed.
10
-
-
Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 12 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed.
2
-
-
Supply and fix distribution board iron clad TPN DB double door with IP-43 protection 415 V 3 Phase 50 HZ 4 Way complete with appropriate size of copper busbar and neutral link complete and incl cutting chasing to wall for fixiing DB and making good the disturbed wall to match with existing surface, complete all as specified and directed.
2
-
-
M & L for vertical DB iron clad factory made TPN 4 Way, MCCB as incomer and MCB SP as out going, double door DB IP 43 protection level, incl Blanking plate, lugs etc complete and neutral link with one MCCB 4 pole 415V 100 Amps rating with rupture capacity 16KA incl connection, fixing flushed to wall, necessary grouting, making good with CM 1:4 and painted to match exisitng wall color, complete all as specified and directed. (outgoing MCB will be measured seperately)
1
-
-
MCB SP 6 to 32 Amp, 240 Volts, 10 KA, C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
106
-
-
MCB SPN 32 Amp, 240 Volts, 10 KA C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
10
-
-
MCB SPN 63 Amp, 240 Volts, 10 KA C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
2
-
-
MCB TPN 63 Amp, 415 Volts, 10 KA C series including taking out old, complete all as specified and directed. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
1
-
-
S & F MCB, 4 Pole, 63 A capacity, 415 V, 10 KA, C series including taking down old MCB 4 Pole, complete all as specified and directed. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.
1
-
-
S & F MCB, 4 Pole, 100 A capacity, 415 V, 10 KA, C series including taking down old MCB 4 Pole, complete all as specified and directed. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.
1
-
-
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed.
Note:- (i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
75
-
-
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface casing caping medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed.
Note:- (i) One run of PVC casing caping, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
75
-
-
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed.
Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
75
-
-
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface casing caping medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring, complete all as specified and directed.
Note :-(i) One run of PVC casing caping, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
75
-
-
Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 10 watt LED, 230V, and making connection with 2 core copper twisted flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light, complete all as specified and directed.
500
-
-
Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 20 watt LED, 230V, and making connection with 2 core copper twisted flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light, complete all as specified and directed.
1000
-
-
LED tube light fitting integral type 1x20W, 230V, LED tube light fitting invertar light (cool day light, normal white and warm white in one fitting) 4 hours backup with extruded polycarbonate, environment friendly, energy efficient ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, incluing taking out old light fitting any type, complete all as specified and directed.
250
-
-
Supply and fixing of bldg security light 30 Watt New generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source and lens enbedded PC cover having TOP opening seperate toughtned glass/verminproof driver compartment, SPDs with IP66 protection and impact resistance of IK07, suitable for pole dia 43mm (max) connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of size 32mm dia lenght 1.20m along with clamps, including taking down old light, complete all as specified and as directed.
30
-
-
Supply and fixing decorative wall light fixture made up of polycarbonate, with 9W LED invertar lamp B22 base with 4 hours backup complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, including taking out old light, complete all as specified and directed.
200
-
-
Supply and fix in repair modular switch piano flush type one way 6 Amps, 1 module, 230V, complete all as specified and directed.
100
-
-
Supply and fix in repair modular switch piano flush type one way 16 Amps, 1 module, 230V, complete all as specified and directed.
50
-
-
Supply and fix in repair modular socket out 6/16 Amps, 5 pin, 2 module, 230V, complete all as specified and directed.
50
-
-
Supply and fix in repair modular Bell switch 6 Amps, 1 module, 230V, complete all as specified and directed.
20
-
-
Supply and fix in repair modular socket out 6 Amps, 3 pin, 2 module, 230V, complete all as specified and directed.
50
-
-
Supply and fix in repair modular step type fan regulator, 1 Module, 100 Watt, 230V, complete all as specified and directed.
20
-
-
Material and labour for PVC Casing & Caping of size (20 x 12) mm ISI Marked suitable for electrical wiring, complete all as specified and directed.
10
-
-
Material and labour for PVC Casing & Caping of size (26 x 16) mm ISI Marked suitable for electrical wiring, complete all as specified and directed.
10
-
-
Material and labour for uPVC electrical conduit pipe of size 20mm dia (heavy duty) Ivory color ISI marked suitable for electrical wiring including junction box, tees and bends etc, complete all as specified and directed.
10
-
-
Material and labour for uPVC electrical conduit pipe of size 25mm dia (heavy duty) Ivory color ISI marked suitable for electrical wiring including junction box, tees and bends etc, complete all as specified and directed.
10
-
-
Material and labour for electrical round sheet PVC material used for covering junction boxes, fan mounting and other electrical opening on wall, complete all as specified and directed by Engr-in-Charge.
10
-
-
Supply and fixing in repair MCB Protected socket (modular AC box) 3 Module with MCB SP of capacity 25 Amp and power socket for geyser, complete all as specified and directed by Engr - in - Charge.
5
-
-
M & L for rendering 15mm thick in cement mortar 1:6 on internal fair faces of brick walls or on concrete surfaces, finished even and smooth with using using extra cement, complete all as specified and as directed.
20
-
-
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.50m below ground level, connecting to galvanised iron wire 4.00mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.
NOTE :- Item of earthing includes the cost of 7.5 m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work.
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements