Military Engineer Services Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Dec 2024
Closing Date11 Jan 2025
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689770_1Tender No
GEK-77/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SPECIAL REPAIR TO BLDG NO P-10 (OR MD ACCN) (03 x QTRS) AT SOLAN AND SPECIAL REPAIR TO BLDG NO P-3 OFFR MESS STAFF ROOM and OFFR MESS STORE P-02 AT SOLAN MILITARY STATION UNDER GE KASAULI
SPECIAL REPAIR TO BLDG NO P-10 (OR MD ACCN) (03 x QTRS) AT SOLAN AND SPECIAL REPAIR TO BLDG NO P-3 OFFR MESS STAFF ROOM AND OFFR MESS STORE P-02 AT SOLAN MILITARY STATION UNDER GE KASAULI
BOQ Items
... More
Supply and fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having Zinc coating 150 gm per sqm (Az-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
65
-
-
... More
Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slab/blankets, any thickness, including cover fillets and removal from site complete all as specified and as directed.
197
-
-
... More
Dismantling timber scantling in framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position, complete all as specified and as directed.
520
-
-
... More
Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed.
4
-
-
... More
Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and as directed.
5.8
-
-
... More
Supply and Fixing for GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and as directed. Note:- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified and as directed.
197
-
-
... More
Supply and Fixing mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed .
1800
-
-
... More
Supply and fixing rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe-410-W (Grade E-250) quality ‘A’ complete all as specified and as directed.
400
-
-
... More
Supply and fixing for rolled mild steel in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc., quality confirming to Fe-290.Gde-E-165 complete all as specified and as directed.
2800
-
-
... More
Supply and fixing water storage tank 500 ltr capacity HDPE triple layer, white coloured, conforming to IS , fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe including taking down the unserviceable water tank and removing from site, complete all as specified and as directed.
4
-
-
... More
Supply and fixing ball brass valve 20mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
4
-
-
... More
Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in hard/dense soil complete, all as specified and as directed.
6.5
-
-
... More
Returning filling in including spreding, leveling, watering and well ramming in layers not exc 25 cm each in soil complete, all as specified and as directed.
4.75
-
-
... More
Removing excavated materials to a distance not exc 50 m and depositing where directed at level n exc 1.5 above the starting points complete, all as specified and as directed.
1.75
-
-
... More
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 100mm) complete all as specified and directed.
22
-
-
... More
Supply and fixing 150mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and as directed.
(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
22
-
-
... More
Demolition of cement concrete (unreinforced), of any description and in any position, not otherwise specifically provided for, and removal of the rubbish/ demolished material outside defence land complete all as specified and as directed.
35
-
-
... More
Material and labour for applying water proofing treatment to sunken slab comprising of the following specifications complete all as specified. (i) Cleaning of roof surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material,dirt,dust etc. (ii) 15mm thick cement plaster on concrete surfaces in cement mortar (1:3) using and including water proofing compound @3% by weight of cement finished even and smooth without using extra cement, (iii) First layer of cement slurry @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm of approved make and allowed layer to air cure for 04 hours.
(iv) Second layer of cement slurry @ 0.244 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm and allowed layer to air cure for 04 hours.. Note :- The water proofing treatment shall be carried out by the manufacturer or his authorised applicators and contractor shall also provide 07 years Guranttee for water proofing treatment carried out in the work. Sunken slab will be tested for 48 hour before carring out other works in sunken floor.
2
-
-
... More
Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course, finished even and fair to receive floor finishes, complete all as specified and directed.
50
-
-
... More
Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation, filling and mass concrete, complete all as specified and directed.
30
-
-
... More
Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and ditected.
5.5
-
-
... More
Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and directed.
105
-
-
... More
Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and directed.
1.8
-
-
... More
Material and labour for providing reinforced cement concrete 1:11/2:3 type A1 (using 20mm graded mechanically crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roof, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.
1.8
-
-
... More
Material and Labour TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed.
185
-
-
... More
Use and waste of formwork to sides and soffits of roof beams, cantilever, bressummers ,lintels , shelves including supports and similar work for rough finished flat surfaces of concrete, complete all as specified.
20
-
-
... More
Dismantling floor, hearth or wall tiling of any description (Ceramic/PCC/Terrazo) and any thickness, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..
295
-
-
... More
Material and labour Non Skid coloured ceramic tiles, joint free, premium/1st quality, 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick screed bed in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.
33
-
-
... More
Material and labour glazed ceramic coloured tiles premium/1st quality in vertical surfaces/skirtings/dados of size 300x600 x7mm/ 450x 350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.
125
-
-
... More
Material and labour double charged light shade vitrified tiles premium quility joint free 10 mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but not exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.
125
-
-
... More
Material and labour double charged light shade vitrified tiles premium quility joint free 10 mm thick (square/ rectangular) cut from tiles of same description as of floor tiles as in serial item No 30 above but 100mm to 200mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.
12
-
-
... More
Stone slabs and tiles of any description or thickness in floors , aprons etc. (Demolition Laid, bedded and pointed in any mortar) complete all as specified and as directed by the Engineer-in-Charge.
55.2
-
-
... More
Material and labour for 18mm thick granite (of any type) work (table rubbed and polished and moulding) in kitchen platforms over and including 10mm thick in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite, complete all as specified.
10
-
-
... More
Material and labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cooking platforms and likes complete all as specified
20
-
-
... More
Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and applying neat cement slurry @ 3.00 kg /sq.m, complete all as specified
145
-
-
... More
Material and labour for Screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone complete all as specified and directed.
145
-
-
... More
Material and labour for machine cut kota stone slab 18-22 mm thick (of size not less than (55 cm x 55 cm) laid in flooring and jointed and pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and cement screed bed , complete all as specified.
145
-
-
... More
M & L machine cut kota stone slab flooring 16 to 18 mm thick in skirting , riser of steps, dados etc, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.
13
-
-
... More
Material and labour, coloured chequered cement concrete tiles 300x300x25mm thick, factory made, ISI marked (IS 13801-1993), with grey cement & pigment, laid with neat cement slurry as in path, pavement ,floors, etc. @ 3Kg/Sqm over & including 20mm thick screed bed of cement mortar (1:6), pointed in white cement with matching colour pigment, complete all as specified and directed.
384
-
-
... More
Taking down chowkats or frames area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr-in-charge.
27
-
-
... More
Taking down chowkats or frames area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr-in-charge.
34
-
-
... More
Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat and refixing in the same opening after erasing complete all as specified.
2
-
-
... More
Supply and fixing Factory made pressed steel frames for doors fabricated from 1.25 mm thick sheet, with double rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming, frame size 125 x 60 mm, complete all as specified
55
-
-
... More
Supply and fixing Factory made pressed steel frames for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming, frame size 105 x 60 mm, complete all as specified and as directed by the Engineer-in-Charge.
57
-
-
... More
Material and Labour for plain cement concrete 1:3:6 type C-0 (using 12.5 mm graded mechanically crushed stone aggregates) as in filling of door frame, complete all as specified and directed.
5
-
-
... More
Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and as directed by the Engineer-in-Charge.
39
-
-
... More
Supply and fixing Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
13
-
-
... More
Supply and fixing for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified.
0.15
-
-
... More
Supply and fixing factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge.
24
-
-
... More
Supply and fixing factory made flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed by the Engineer-in-Charge.
20
-
-
... More
Supply and fixing factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed by the Engineer-in-Charge.
15
-
-
... More
Supply and fixing 35mm thick 2nd class softwood factory made glazed and skeleton for door shutters, open rebated and prepared to receive glass, gauze, etc . divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc for door .; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge
20
-
-
... More
Material and labour 18 mm thick pre laminated particle board exterior grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet , shelves for cupboard, frame with door if required including 3mm thick 2nd class hardwood leaping patti on cut edge of boards as in repair complete all as specified and as directed by the Engineer-in-Charge.
15
-
-
... More
Material and labour for design cover fillets of standard hard board, 40mm wide and 4.5mm thick, and fixing with screws, complete all as specified and directed by Engineer-in-charge.
30
-
-
... More
Supply and fixing in repair, continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete all as specified.
20
-
-
... More
Supply and Fixing in repair magnet catcher 75 mm brass body fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and as directed by the Engineer-in-Charge.
12
-
-
... More
Supply and fixing mild steel hinges, medium weight cold rolled mild steel, size 100mm, ISI marked, complete all as specified and directed .
40
-
-
... More
Supply only mild steel hinges, medium weight cold rolled mild steel, size 100mm, ISI marked, complete all as specified and directed .
100
-
-
... More
Supply only mild steel butt hinges medium weight , cold rolled, 50mm, ISI marked, complete all as specified and directed .
85
-
-
... More
Supply and fixing 250 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed .
28
-
-
... More
Supply and fixing in repair 250 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed .
3
-
-
... More
Supply and fixing, aluminium anodised barrel tower bolts of extruded section, 150mm, ISI marked, complete all as specified and directed .
49
-
-
... More
Supply and fixing, aluminium anodised barrel tower bolts of extruded section, 100 mm, ISI marked, complete all as specified and directed .
55
-
-
... More
Supply and fixing in repair, aluminium anodised barrel tower bolts of extruded section, 150mm, ISI marked, complete all as specified and directed .
3
-
-
... More
Supply and fixing, extruded aluminium alloy handles with plates, fabricated type, anodised 125mm size, ISI marked, complete all as specified and directed .
30
-
-
... More
Supply and fixing, extruded aluminium alloy handles with plates, fabricated type, anodised 150mm size, ISI marked, complete all as specified and directed .
25
-
-
... More
Supply and fixing, extruded aluminium alloy handles with plates, fabricated type, anodised 100mm size, ISI marked, complete all as specified and directed .
60
-
-
... More
Supply and fixing in repair, extruded aluminium alloy handles with plates, fabricated type, anodised 150mm size, ISI marked, complete all as specified and directed .
3
-
-
... More
Supply and Fixing Hasp and staple Size of 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, ISI marked, complete all as specified and directed.
6
-
-
... More
Supply & Fixing 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge
24
-
-
... More
Supply and Fixing Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed .
14
-
-
... More
Supply and fixing double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed .
30
-
-
... More
Supply and fixing in repair, double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed .
3
-
-
... More
Supply and Fixing 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified and directed .
12
-
-
... More
Supply and Fixing Factory made box type steel window with side hung shutters (wire mesh type) with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing/guard bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed . (Note: Guard bars and shutter glass & wire mesh measured separately)
23
-
-
... More
-Ditto-as Item No 77.00, window shutters (glass type) but without glazing/guard bars.
23
-
-
... More
Supply and Fixing Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for both glass and wire mesh type with glazing bars (measured each separately) and 04 nos pintle hinges & 04 Nos 150mm mild steel tower bolt, 02 nos steel peg stay, 02 nos steel handle to each shutter dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. (Note: Guard bars and shutter glass & wire mesh measured separately)
4
-
-
... More
Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; angle iron chowkats for door ,barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290-Gde E-165 complete all as specified.
265
-
-
... More
Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge
36
-
-
... More
Supply and fixing figured glass 3mm thick pin head type, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified.
2
-
-
... More
Supply and fixing for sheet glass 4mm thick, ordinary quality and glazing with oil putty, in square not exceeding 0.5 Square metre in each pane or with wooden beads to wooden shutters, complete all as specified.
20
-
-
... More
M & L for Prepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified.
260
-
-
... More
M & L for Prepration of new painted wooden or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint,over one coat of pink primer complete all as specified and directed.
160
-
-
... More
Material and labour for Preparation of old steel surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
20
-
-
... More
Material and labour for Preparation of old wooden surface, of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
40
-
-
... More
Supply and Fixing Stainless steel 20 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall with finals/finnels, connected accessaries, rubber packing, required screws and rawal plugs, fixed in repair, complete all as specified and directed.
70
-
-
... More
Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed by Engr-in-charge.
19
-
-
... More
Material and labour for walling of square rubble stone masonry,well bonded, bedded and solidly hearted, built in cement mortar 1:4 in parapet walls,abutments brought upto courses complete all as specified and as directed.
10
-
-
... More
Material and labour for walling of square rubble stone masonry,well bonded, bedded and solidly hearted, built in cement mortar 1:4 in parapet walls,abutments brought upto courses but except stone complete all as specified and as directed.
Note- The serviceable stones obtained from Serial item No- 89.00 will be used after removing motar, cleaning with water, etc.)
2
-
-
... More
Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.
5
-
-
... More
Material and Labour for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:6) , complete all as specified. ( Note- The serviceable bricks obtained from Serial item No- 89.00 will be used after removing motar, cleaning the bricks with water, etc.)
2
-
-
... More
Material and labour for taking down cement or cement lime plaster of any description on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.
950
-
-
... More
Material and labour for rendering in cement mortar 1:4, 15mm thick, on surfaces of any description of brick work or concrete surfaces for double storey bldg, mixed with an including integral WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair complete all as specified and as directed.
440
-
-
... More
Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkaline resistant primer complete all as specified and as directed.
440
-
-
... More
Material and Labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement complete all as specified.
10
-
-
... More
Material and labour for three coat of white wash on newly plastered surface of ceiling including preparation of ceiling surfaces complete all as specified and directed
10
-
-
... More
Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and fair without using extra cement complete all as specified and as directed.
700
-
-
... More
Material and labour applying 2 to 3 mm thick wall care putty white cement based in two or more coats to achive smooth surfaces complete all as specified and as directed by the Engineer-in-Charge.
700
-
-
... More
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller over a coat of primer, complete all as specified and as directed.
700
-
-
... More
Material and labour for complete removal of old existing treatment of surfaces and after that 2mm thick wall care putty to obtain smooth regular/ even finish using sand paper and applying two coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge.
110
-
-
... More
Material and labour for preparation of old decorated plastered surfaces of ceiling and applying two coats of white wash on ceiling surfaces, complete all as specified and directed.
35
-
-
... More
Material and labour for complete removal of existing treatment of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including sand paper or iron patti / flat complete all as specified.
110
-
-
... More
Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed .
165
-
-
... More
Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed .
70
-
-
... More
Supply and fixing of 15mm dia steel tubes, medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.
145
-
-
... More
Supply & fixing of 20 mm dia steel tubes, medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.
60
-
-
... More
Refixing steel water tubing of 15 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.
20
-
-
... More
Refixing steel water tubing of 20 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.
10
-
-
... More
Supply and fixing in repaircast iron soil, waste and vent spun pipes 100 mm bore, ISI marked, in any length, with or without ears, with cement joints, fixed to wall and laid in trenches or in floors complete, all as specified.
15
-
-
... More
Supply and fixing in repair, cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, fixed to wall and laid in trenches or in floors complete, all as specified and directed.
25
-
-
... More
Supply and fixed in repair, cast iron ‘P’ or ‘S’ trap, 100 mm size, complete, all as specified and directed.
3
-
-
... More
Supply and fixed in repair, cast iron Bend 100 mm dia with duck's foot or heel rest complete, all as specified and directed.
2
-
-
... More
Supply and fixed in repair, cast iron 'T' junction 100 mm dia with or without oval acess door complete, all as specified and directed.
3
-
-
... More
Supply and fixed in repair, cast iron sockets (double) collars, 100mm dia complete, all as specified and directed.
3
-
-
... More
Supply and fixed in repair, cast iron Branch pieces 100mm, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete, all as specified and directed.
3
-
-
... More
Supply and fixing in repair, cast iron bends (any radius) 75mm dia diminishing pieces or tapers complete, all as specified and directed.
3
-
-
... More
Supply and fixing in repair, cast iron bends (any radius) 75 mm dia ,diminishing pieces or tapers fitted with oval access door, complete, all as specified and directed.
6
-
-
... More
Supply and fixed in repair, cast iron sockets (double) collars, 75mm dia complete, all as specified and directed.
3
-
-
... More
Supply and fixing in repair, cast iron branch pieces, 75 mm dia, single (equal or unequal), ordinary or inverted or with parallel branches complete, all as specified and directed.
3
-
-
... More
Supply and fixed in repair, cast iron 'T' junction 75 mm dia with or without oval acess door complete, all as specified and directed.
3
-
-
... More
Supply and fixing in repair Cast Iron cowl 75 mm dia complete, all as specified and directed.
2
-
-
... More
Supply and fixed in repair Cast iron floor trap 75mm dia of outlet with grating, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete and making good the disturbed surface to match the existing surface and after taking out the existing floor trap, complete all as specified and directed.
9
-
-
... More
Supply and fixing in repair, 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.
(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
2
-
-
... More
Supply and fixing in repair, 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.
(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
2
-
-
... More
Supply and fixing in repair, 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed.
(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
2
-
-
... More
Supply and fixing in repair, 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.
(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)
2
-
-
... More
Supply and fixing in repair, 100mm bore PVC (SWR) 'P' or 'S' trap including jointing with solvent cement complete all as specified and as directed.
1
-
-
... More
Supply and fixing in repair, 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)
1
-
-
... More
Supply and fixing in repair, 110mm bore UPVC (SWR) junction single (Single T) equal or unequal with access doors complete all as specified and as directed.
1
-
-
... More
Supply and fixing in repair, 110mm bore UPVC (SWR) reducer including jointing with solvent cement, complete all as specified and as directed.
1
-
-
... More
Supply and fixing in repair, 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)
1
-
-
... More
Supply and fixing in repair, 75mm bore UPVC (SWR) junction single (Single T) equal or unequal with access doors complete all as specified and as directed.
1
-
-
... More
Supply and fixing in repair, 75 mm bore UPVC (SWR), vent cowls including jointing with solvent cement, complete all as specified and as directed.
1
-
-
... More
Supply and fixing in repair, 75mm bore UPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed .
2
-
-
... More
Supply and fixing in repair, bib tap, long body, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed. Make- PRIMA Cat No PLF-6202 or equivalent model in makes mentioned in Appendix 'B' of tender document.
Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.
12
-
-
... More
Supply and fixing in repair,15mm bore pillar tap, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ complete all as specified and directed. Make--PRIMA Cat No PPL-5309 or equivalent model in makes mentioned in Appendix 'B' of tender document.
Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.
2
-
-
... More
Supply and fixing in repair, angle cock, 15mm dia, cast copper alloy, chromium plated, ISI marked, screwed down, high pressure with capstain head, screwed both ends for iron pipes or for unions complete all as specified and as directed. Make-Prima Art No- PLF-6205 or equivalent model in makes mentioned in Appendix 'B' of tender document .
Note: Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.
20
-
-
... More
Supply and fixing in repair, stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with capstain head, (concealed type) with sliding flange, screwed both ends for 15mm bore pipes or for unions complete all as specified and directed. Make- PRIMA Cat No PLF-6210 or equivalent model in makes mentioned in Appendix 'B' of tender document.
Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.
3
-
-
... More
Supply and fixing in repair, overhead shower rose, 125mm dia, round shape, single flow with shower arm 15 mm size, for wall mounted showers, complete all as specified and directed. Make- Cat No PSH-4407 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document.
Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.
3
-
-
... More
Supply and fixing in repair, chromium plated central hole wash hand basin mixer with regular spout without Popup waste system with 450mm long braided hoses all as specified. Make- Jaguar, Cat No 7167B or 1678 or equivalent model in makes mentioned in Appendix 'B' of tender document.
11
-
-
... More
Supply and fixing in repair, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bore complete all as specied and directed.
Make- Cat No PGT-1402 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document.
5
-
-
... More
Supply and fixing in repair, Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 15 mm bore complete all as specied and directed.
Make- Cat No PGT-1401 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document.
5
-
-
... More
Supply and fixing in repair, vitreous china, wash hand basin, white, flat back, of size 550x440mm including painted CI brackets, embedded in wall in CM 1:4, with and including suitable size PVC waste pipe, PVC connections and chromium plated waste coupling, etc., complete all as specified and as directed.
4
-
-
... More
Supply and fixing in repair, stainless steel sink, 1.00mm thick for kitchen, with waste coupling, 32 mm, Hard PVC flexible waste pipe, washers, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union etc., overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm complete.
4
-
-
... More
Supply and fixing in repair stainless steel plate rack, made out of 1.00mm thick sheet of size 24"x36"x10" deep, ISI marked, fixed as in repairs complete all as specified and directed.
Make- Cat No PPR-1653 of PRIMA or equivalent model in makes mentioned in Appendix 'B' of tender document.
3
-
-
... More
Supply and fixing of brass chromium plated tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
Make- PRIMA Cat No PDX -4501 A or ESSCO Cat No-1111 or Prayag Cat No. BA-20 or equivalent model in makes mentioned in Appendix 'B' of tender document.
Note- Contractor shall submit a guarentee certificate for tubular towel rail from manufacturer to Engineer-in-Charge before claiming payment.
8
-
-
... More
Supply and fixing in repair, vitreous china coloured squatting pan of orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc including making good to existing floor surface and connection to flush pipe etc. complete all as specified and directed.
4
-
-
... More
Supply and fixing in repair of virgin polypropylene cistern, 10 litre capacity, ISI marked, coloured, low level complete with PVC bend/flush pipe and making all connections including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed.
4
-
-
... More
Supply and fixing in repair, PVC connections 600mm long with PTMT nuts and PVC washers on both ends fixed to 15 mm bore of pipe complete all as specified and directed.
20
-
-
... More
Supply and fixing in repair, looking mirror of size 450mmx600mm and 5.5mm thick, selected quality, bevelled edges, glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair, CP grating doom (openable type) 100mm dia with or without waste hole both.(minimum weight 25 gms) complete all as specified and directed.
12
-
-
... More
Supply and fixing in repair, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed.
6
-
-
... More
Supply and fixing in repair,, soap dish size 160x160x90mm, vitreous china white, fixed to plugs with chromium plated brass screwscomplete all as specified and directed.
8
-
-
... More
M & L for taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by the Engineer-in-Charge
101
-
-
... More
Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III .
59
-
-
... More
Description same all as per item No. 157.00 but for One 3 pin, 5 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-Charge.
19
-
-
... More
Description same all as per item No. 157.00 but for One 3 pin 5 Amps socket outlet controlled by one switch on Same board, complete all as specified and as directed by Engineer-in-Charge.
12
-
-
... More
Description same all as per srl item No 157.00 here-in-before but for one socket outlet 15 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.
11
-
-
... More
Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed.
13
-
-
... More
Supply and fixing switch piano 5/6 Amps, flush button type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed.
90
-
-
... More
Supply and fixing switch piano 15/16 Amps flush botton type one way 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.
11
-
-
... More
Supply and fixing socket outlet 2 in 1, 5 pin 6 Amp multi pin flush type, 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.
31
-
-
... More
Supply and fixing Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose, 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.
11
-
-
... More
Supply and fixing Ceiling rose surface bakelite 65x50mm three terminals including provn of PVC blocks, complete all as specified and as directed.
40
-
-
... More
Supply and fixing LED lamp 9watt capacity B22 polycorbonate, isolate body complete all as specified and directed.
13
-
-
... More
Supply and fixing switch piano, bell push, 6 Amps , flush type, 230V, 50 Hz supply, AC supply, ISI Marked, complete all as specified and directed.
3
-
-
... More
Supply and fixing for Bell, electric, Ding Dong AC, 230 volts, single pole fixed in repair complete all as specified and directed.
3
-
-
... More
Supply and Fixing LED 22 watt integrated batten with inbuilt lithium ion battery with minimum 4 hour back up including removing of unserviceable light fitting complete all as specified and as directed by the Engineer-in-Charge.
13
-
-
... More
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
4
-
-
... More
Supply and fixing LED light fitting with high out put diffuser 4 feet, 20 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
15
-
-
... More
Supply and fixing LED surface mounted bulk head luminaries 8-10 watt, IP 65, PVC housing, surge protection including driver & LED lamp etc complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light as in repair complete all as specified and as directed .
5
-
-
... More
Supply and Fixing LED security light 35 watt LED with lence and water/weather proof powder coated high pressure dia cast housing with IP-66 built - in control driver, aluminium reflector, heat resistant toughened clear glass, connector block, surge protection fixed on ceiling/pole/wall with fixing arrangement fixed with nuts/bolts and 1.5 sqmm 3 core flexible wire from ceiling rose to light fitting complete including taking down old secrity fitting any type all as specified and directed as per Complete.
3
-
-
... More
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
6
-
-
... More
Supply and fixing in replacement sheet metal enclosure, (ISI marked), conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, triple pole & neutral (TPN), horizontal type suitable for fixing MCB, 415 volts, 4 way with 200 Amp rated copper bus bar, flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection, necessary PCC work and making smooth the disturbed surface complete all as specified and as directed .
1
-
-
... More
Supply and fixing sheet metal MCB DB, SPN, 8 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed.
5
-
-
... More
Supply and fixing MCB, double Pole, AC supply, 240 volts, 40 Amps, 'B' series,10 kA rupturing capacity and making connections complete all as specified and as directed.
3
-
-
... More
Supply and fixing MCB, double Pole, AC supply, 240 volts, 40-63 Amps, 'C' series,10 kA rupturing capacity and making connections complete all as specified and as directed.
2
-
-
... More
Supply and fixing Isolator 4 Pole 'B' series, 100 amps capacity, AC 415 V, 10kA complete all as specified and directed
1
-
-
... More
Supply and fixing MCB, Single Pole, AC supply, 240 volts, 06 to 32 Amps, 'B' series,10 kA rupturing capacity and making connections complete all as specified and as directed.
28
-
-
... More
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.
25
-
-
... More
M & L for sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuity conductor connected to common earth dolly including concealed on wall/ceiling surfaces in PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed.
Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.
25
-
-
... More
Supply and Fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA 'B' curve complete all as specified and as directed by the Engr-in-charge.
3
-
-
... More
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, hermostate, NRV, connection piece etc.and including taking down unserviceable and deposit to E/M Store.
Note:- Geyser will be fitted with fastners-04 Nos including bolts washers etc and making good disturbed surface complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and fix exhaust fan, steel body AC single Phase. 230V, of size 300mm sweep, 900 rpm, with, blades, frame and louvers shutters, mounting on walls with holding down bolts, nuts, washers with cutting holes into or through stone/brick walls for fixing of exhaust fan including making good the cutting and matching the surface with existing surfaces and connection of flexible copper conductor cable three core ceiling rose to fan and testing including taking down unserviceable and depositing to E/M Store complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete as in repair complete all as specified and as directed.
2
-
-
... More
Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of size 4 mm dia or tape and overall PVC sheathed 16 Sqmm nominal cross section,4 core ,stranded conductor , in service connections complete all as specified and as directed.
30
-
-
... More
Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of size 4 mm dia or tape and overall PVC sheathed 10 Sqmm nominal cross section,4 core ,stranded conductor , in service connections complete all as specified and as directed.
60
-
-
... More
Supplying & fixing in replacement of double walled corrugated HDPE duct pipe of 40 mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittinggs for cable protection complete all as specified and directed.
86
-
-
... More
Supply and Fixing steel meter box of size 90x95x20 cm box with thickness of steel 2mm including double door for opening with lockable arrangement incl steel knob, hinges, plater for hanging of meter 02 Nos and DBs 03 Nos etc with 4mm thick plain glass (size 6"x6") for provn of meter reading complete all as specified and directed by Engineer-in-Charge.
1
-
-
... More
Amount of credit of Rs. 156027.56 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements