Jal Shakti Department Tender

Schedule A1- Pumping Machinery

Pumping Machinery :- Providing and installation of suitable Clear water submersible pumping set of KSB/ Calama/ Johnston/ Crompton/BS/ SABAR/ Oswal/ Kirloskar/WPIL make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps , cable clips, depth gauge NRV & Sluice valves of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in – Charge. The rates shall be for complete Job to run the machinery in proper working. and should meet with the requirements. (Ist stage). The offer should be include alongwith all its accessories required such as cables, panels etc. shall be part of the offer including standby arrangement, the rate shall be quoted with per set rate of pumping machinery. The HP are indicative. Since the re check and re-design of proposal/scheme is to be carried out by the lowest bidder, the design/drawings so approved by the competent authority after finalisation of design and drawings,any variation in HP and other accessories etc.The rate shall be worked out on prorata basis after approval of the competent authority and payment will be made accordingly. For detailed design parameters/ requirements are given (Refer Data sheet No. 1).

T/well Ambhera Dhiraj 6.77 LPS with Head of 72.97 m ( 2 Nos. Set i/e 1 Working & 1 Stand By )