Institute Of Himalayan Bioresource Technology Tender

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work including necessary repair of wall with white cement based wall putty.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing aluminium compositie panels of exterior applications, 3 mm thick with aluminium thickness of 0.25 mm, with PVDFcoating, in approved clours including filling the joints with exterior application Silicon in false ceiling/wall panels. The frame work will be M.S. tubes and will be paid in basic item of structural steel work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Renovation of existing Dining Chair (Hostel) Seat size 18"x16" including change of seat cushion with 40 density 100mm thick. New cushion & change of cloth (cost excluding cloth to be given) melamine polishing etc. complete.

Renovation of existing Dining Table Frame work including repolishing etc. complete size 1.04x0.75x0.60

Providing and fixing cloth of approved make 54" wide as per sample approval by the department.

Providing and fixing Kitchen cabinets of size 2.10(L)x1.00m) (H)x 0.60m wide of HDMR Board of 18mm thickness. The cabinets consist of 6 Nos. equal size Drawers made of HDMR board of 18 mm thickness, each drawers shall be fixed on 2 no. 8" thick NICKON hinges of approval make. The cabinets shall be fixed with stainless steel handles etc. complete. (Only Front Area shall be measured for payment purpose only

Providing and fixing vertical louvers in existing blinds with replacement of cloth vista cubee Q 1003/MAC imperial profile PR-394 complete including replacement of chain & weight in complete all respect

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FRLS insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required. (Modular Accessories Make: Anchor Roma/ Havells Crabtree/ Wipro North West ). i) Group C

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. i) 2x4 sqmm + 1x4 sqmm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. i) 3 pin 5/6 A socket outlet

Supplying & fixing 2 Module Stepped type Electronic Fan Regulator on existing Modular Plate Switch box including connection but excluding modular plate extra as required. (Modular Accessories Make: Anchor Roma/ Havells Crabtree/ Wipro North West )

Supplying & fixing suitable size GI/ PVC box with modular plate in front on surface or in recess, including providing & fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (Modular Accessories Make: Anchor Roma/ Havells Crabtree/ Wipro North West )

Installation, testing and commissioning of pre wired, fluorescent fitting/ compact fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, inc connection with 1.5 sqmm FRLS insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length(upto 30 cm) with 1.5 sqmm FRLS insulated, copper conductor, single core cable inc providing and fixing Phenolic laminated sheet cover on the fan box etc. as required.

Supplying & fixing suitable size GI/PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No. 3 Pin 5/6 Amp. Modular socket outlet and 2 Nos. 5/6 Amp. Modular switch, connections etc. as required. ( FOR LIGHT PLUGS TO BE USED IN NON RESIDENTIAL BUILDING). (Modular Accessories Make: Anchor Roma/ Havells Crabtree/ Wipro North West )

Supplying of 5 star rated Ceiling Fans 1200 mm sweep with white colour. (Make: Havells/ Bajaj/ Crompton) .

Supplying and testing of LED Batten light 20W having extruded aluminium body. (Make: Philips / bajaj/ Wipro ).