Housing And Urban Development Authority Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Housing And Urban Development Authority Tender
Real Estate Service
Eprocure
Opening Date29 Mar 2025
Closing Date19 Apr 2025
Tender Amount₹ 3,44,90,719
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for Assessed Available Bid capacity is ( A x N x M - B ).
Technical Capacity
... View More
The bidder is required to have prior work experience in civil engineering works, specifically in RCC framed Structure building. The required prior work experience includes: * Three similar works each of value not less than 40% of the estimated cost put to tender.
* Two similar works each of value not less than 60% of the estimated cost put to tender.
* One similar work of value not less than 80% of the estimated cost put to tender. The estimated cost put to tender is Rs. 3,44,90,719.62. The bidder should have satisfactorily completed, as prime contractor, or sub-contractor, at least one similar work equal in value to half of the estimated cost of work or at least one Civil Engineering work equal in value to the estimated cost of work for which the bid is invited. The value of executed works shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 5% per annum, calculated from the date of completion to the last date of receipt of application for tender. The bidder is also required to provide information on the "Total annual volume of civil engineering construction work executed and payments received in the last five years preceding the year in which bids are invited" in the format: Year- [Amount in Rs. lakhs]
Year- [Amount in Rs. lakhs]
Year- [Amount in Rs. lakhs]
Year- [Amount in Rs. lakhs]
Year- [Amount in Rs. lakhs] No specific percentage is mentioned for this requirement.
Costs
EMD
₹ 6,89,820Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HIMUD_103153_1Tender No
NO HIMUDA SD E TENDER 6278-92 DATED 27.03.2025Tender Authority
Housing And Urban Development Authority ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Housing Colony Sanjauli, Phase III Khasra No.89,90 and 91 up Mohal Shahnaan II SH C o 6No 2BHK Flats Block No.18 B with Parking Floor and attic floor including internal and WS and SI ,Development of site,External WS,SS and RWHT.
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) i/c carriage of material in all leads and lifts.
0.46
6887
3168.02
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size )i/c carriage of material in all leads and lifts.
61.71
5441
335764.11
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size )i/c carriage of material in all leads and lifts.
57.84
5092
294521.28
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floor level, excluding the cost of centering, shuttering and finishing:1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) i/c carriage of material in all leads and lifts.
445.39
7773
3462016.47
... More
Providing & laying Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. i/c carriage of material in all leads and lifts.
769.08
565
434530.2
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. i/c carriage of material in all leads and lifts.
161.51
97
15666.47
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. i/c carriage of material in all leads and lifts.
59.67
591
35264.97
... More
Providing and laying of synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete (Outer surface plaster) by using 125gms of synthetic Polyester triangular fibre for 50 Kg cement used as per directions of Engineer-in-Charge. i/c carriage of material in all leads and lifts.
135
64
8640
... More
Providing and laying Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 Cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size ) i/c carriage of material in all leads and lifts.
38.5
8612
331562
... More
Providing and laying centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete i/c carriage of material in all leads and lifts.
107.26
271
29067.46
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc
462.77
565
261465.05
... More
Suspended floors, roofs, landings, balconies and access platform
909.6
647
588511.2
... More
Shelves (Cast in situ)
33.27
647
21525.69
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
1118.98
498
557252.04
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
678.45
686
465416.7
... More
Stairs, (excluding landings) except spiralstaircases
49.47
550
27208.5
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
115.71
277
32051.67
... More
Weather shade, Chajjas, corbels etc.,including edges
66.74
682
45516.68
... More
Providing & laying Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with PVC cross lock cover all complete upto plinth level including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more i/c carriage of material in all leads and lifts.
29180.1
110
3209811
... More
Providing & Laying Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding PVC cross lock cover all complete above plinth level including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more. i/c carriage of material in all leads and lifts.
39856.69
110
4384235.9
... More
Providing plaster drip course/ groove in plastered surfaceor moulding to R.C.C. projections.
245.92
52
12787.84
... More
Providing and laying in position mechanically mixed and vibrated design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level i/c carriage of material in all leads and lifts.
154.09
8194
1262613.46
... More
All works above plinth level upto all floor level.
262.29
8994
2359036.26
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand i/c carriage of material in all leads and lifts.
3.62
7882
28532.84
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) i/c carriage of material in all leads and lifts.
55.16
9164
505486.24
... More
Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto all floor level i/c carriage of material in all leads and lifts.
18.9
860
16254
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level up to all floor level in Cement mortar 1:4 (1 cement :4 coarse sand) i/c carriage of material in all leads and lifts. i/c carriage of material in all leads and lifts.
233.86
1110
259584.6
... More
Providing and laying autoclaved aerated cement blocks masonry with 150 mm/230mm/250mm/300mm thick AAC blocks in super structure above plinth level up to all floor level with RCC band at sill level and lintle level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer in charge (the payment of RCC band and reinforcement shall br maid for saperately) i/c carriage of material in all leads and lifts.
114.62
5738
657689.56
... More
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand) i/c carriage of material in all leads and lifts.
78.36
67
5250.12
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand i/c carriage of material in all leads and lifts.
16.35
5330
87145.5
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, mouldingand polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade area of slab over .50 sqm i/c carriage of material in all leads and lifts.
28.4
3641
103404.4
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work
37.03
355
13145.65
... More
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge i/c carriage of material in all leads and lifts.
96
295
28320
... More
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture i/c carriage of material in all leads and lifts.
79.26
1264
100184.64
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
70.02
4281
299755.62
... More
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
-
-
-
... More
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
... More
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium
-
-
-
... More
item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. i/c carriage of material in all leads and lifts.
-
-
-
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood. i/c carriage of material in all leads and lifts.
3.67
69076
253508.92
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws i/c carriage of material in all leads and lifts.
85.89
1740
149448.6
... More
Providing and fixing Eco Pine wood ceiling and pannelling with tongued and grooved jointing and screw (frame work/ 9mm ply wood to be measured and paid for separately) including carriage of material in all leads and lifts.
167.89
1711
287259.79
... More
Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) 9mm thick ply. i/c carriage of material in all leads and lifts.
167.89
1443
242265.27
... More
Providing and fixing door eye viewer in all type of flush/panelled door shutter including all necessary fittings complete including carriage of materials in ali leads and lifts. Circular
6
498
2988
... More
Providing and fixing wire gauge shutters using 35 mm thick galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws in 2nd class teak wood. including carriage of materials in ali leads and lifts.
24.57
4075
100122.75
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood.50x12mm.including carriage of materials in ali leads and lifts.
314.7
174
54757.8
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complet 25 mm dia including carriage of materials in ali leads and lifts.
170.22
296
50385.12
... More
Providing and fixing M.S. grills of required pattern in frames of windows /ventilater etc. with M.S. flats, square or roundbars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.including carriage of materials in ali leads and lifts.
97.2
177
17204.4
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.including carriage of materials in ali leads and lifts.
52
948
49296
... More
Providing and fixing bright finished brass 100 mm mortice latchwith one dead bolt and a pair of lever handles of approvedqualitywithnecessaryscrewsetc. complete.including carriage of materials in ali leads and lifts.
20
792
15840
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.including carriage of materials in ali leads and lifts. 50mm including carriage of materials in ali leads and lifts.
36
280
10080
... More
Fixing brass handles to required colour and shade with necessary screws, etc. complete including carriage of material in all leads and lifts 125mm (L.R)
36
8
288
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.including carriage of materials in ali leads and lifts.
22
1180
25960
... More
Fixing bright/ matt finished stainless steel tower bolts of approved quality & make with necessary screws etc complete : 300x10mm (L.R)
176
36
6336
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type including carriage of materials in ali leads and lifts.
72
40
2880
... More
Providing and fixing WPC doors frames 100mmx63mm (Single Rebate) having density 750kg/cum or more, fixed in position with Screws all complete as directed by Engineer-in-site, including carriage of material in all leads and lifts.
170.1
1033
175713.3
... More
Providing and fixing WPC frames for doors 125mmx 63mm (Double Rebate) having density 750kg/cum or more, fixed in position with Screws/ dash fashner all complete as directed by Engineer-in-site, including carriage of material in all leads and lifts.
149.9
1104
165489.6
... More
Providing and fixing factory made uPVC glazed/ wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/ coupler (where ever required) extruded profile having minimum wall thickness of 1.70mm for Series R1 & R2 profiles and 2.10mm for Series R3 and R4 profiles onfirming to EN: 12608 in any shape, colour and design duly reinforced with galvanised mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and inline sash adaptor (where ever required) of appropreate dimension, EPDM gasket, hardware (Brand HOPPE, ROTO, GODREJ and KINLONG), SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367:Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing confirming to CPWD specification & direction of Engineer-in-charge. Section of steel reinforcement and cross sections of UPVC profiles to be as per design approved by Engineer-in-charge. Wire mesh/ Glazing of plain/ toughned/ laminated/ double glass unit with/ without high performance coatings as per design requirements and confirming to IS: 3548 & IS:16231. Note: Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed 45m/sec as per IS 875 - Part3 (ii) Sites with structure height more than 20m for all wind speeds.
-
-
-
... More
(I) Three track, three panels sliding windows with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 (I-60) series with frame (98mm & above) X (40mm & above) & both glazed and fly screen sash (30mm & above) X (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel (5-10-5mm DGU) along with multi-point locking system. (Height upto 1.85 m ). including fixed portion of DGU wherever required.
163.64
11374
1861355.91
... More
(II) Casement window with Double Rebate Frame with one Side Hung Glazed Panel (with Double Toughned Glass Unit 5-10-5mm DGU) and one Side Hung wire mesh Panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel: Using R3 Series (I-60) with frame (110mm & above) x (45mm & above) & glazed sash (55mm & above) x (65mm & above) & fly screen sash (30mm & above ) x (55mm & above) (Height upto 1.85 metre). including fixed portion of DGU wherever required.
18.54
19554
362533.01
... More
Providing and fixing 25mm thick High density WPC Board confirming to IS standard marked with both side decorative for cupboard shutters& shelves edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing consealed hinges conforming to IS:3818 marked with necessary screw etc all complete.including carriage of materials in ali leads and lifts.
205.51
2267
465891.17
... More
Fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125mm (LR)
144
12
1728
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials in ali leads and lifts.
18956.01
103
1952469.03
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.including carriage of materials in ali leads and lifts.
3.24
8246
26717.04
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.using M.S. angle 40x40x6 mm for diagonal brases including carriage of materials in ali leads and lifts.
1.44
4448
6405.12
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.including carriage of materials in ali leads and lifts.
28
171
4788
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials in ali leads and lifts.
1057.98
130
137537.4
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of materials in ali leads and lifts.
553.82
548
303493.36
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.including carriage of materials in ali leads and lifts.
3.75
480
1800
... More
Stone filling behind retaining
walls :including carriage of materials in ali leads and lifts.
654
1536
1004544
... More
Providing and laying antiskid vetrifide floor tiles size 600x600mm (thickness not less than 10mm with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours all shades laide on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete including carriage of materials in ali leads and lifts.
178.18
1535
273506.3
... More
Providing and laying vitrified floor tilesof size 600x1200mm thickness not less than 10mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.complete including carriage of materials in ali leads and lifts.
451.81
1347
608588.07
... More
Providing and fixing Digital tiles of size 600x1200mm thickness not less than 8mm conforming to IS: 15622, of any size of approved make in all colours,as approved by Engineer -in -charge,in skirting,risers of steps and dedos,over 12mm thick bed of cement mortoe 1:3(1cement:3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in ali leads and lifts.
439.23
1430
628098.9
... More
Providing and laying vitrified tiles thickness not less than 8mm any size with water absorption less than 0.08% and conforming to IS: 15622, of approved make,and manufactures, in all colours and shade,in skirting, riserof steps, laid over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete .including carriage of materials in ali leads and lifts.
45.21
1527
69035.67
... More
Providing and fixing Aluminium sheet ceiling with 1mm thick Aluminium sheet in panets of aluminium channels base frame in ceiling with aluminium screws and aluminium beading 40x2mm complete (Aluminium channels base frame to be measured and paid for separately)including carriage of materials in ali leads and lifts.
107.22
1727
185168.94
... More
Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7including carriage of materials in ali leads and lifts.
185
333
61605
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.including carriage of materials in ali leads and lifts.
8
195
1560
... More
Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand).including carriage of materials in ali leads and lifts.
10
108
1080
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameterincluding carriage of materials in ali leads and lifts.
122.4
291
35618.4
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°/110mm dia.including carriage of materials in ali leads and lifts.
16
225
3600
... More
Shoe (Plain) 110 mm dia
8
232
1856
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110mm dia including carriage of materials in ali leads and lifts.
64
248
15872
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. including carriage of materials in ali leads and lifts.
8
97
776
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.including carriage of materials in ali leads and lifts.
473.87
890
421744.3
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) & Valley including carriage of materials in ali leads and lifts.
146.94
409
60098.46
... More
Flashings/ Aprons.( Upto 600 mm)
155.36
367
57017.12
... More
Gutter (600 mm over all girth)
60.18
1016
61142.88
... More
Providing and fixing M.S. BP Sheet1.66mm to 2mm thick in eaves board / facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in ali leads and lifts.
89.72
1895
170019.4
... More
Providing and fixing Aluminium Double bubble thermal insulation sheet 300 GM, 8mm thick including carriage of material in all leads and lifts.
167.89
725
121720.25
... More
Providing and fixing thermal insulation of ceiling (under deck insulation )with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bagsfixed to ceiling with metallic cleats(50x50x3mm)@60 cm and wire mesh of 12.5mm x24 gauge wire mesh for top most ceiling of building including carriage of materials in ali leads and lifts.
167.89
534
89653.26
... More
15 mm cement plaster on the fair side of brick/concrete/stone walls in Cement Mortar 1:6 (1 cement:6 sand). including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.
1638.31
269
440705.39
... More
20 mm cement plaster on the rough side of brick/concrete/stone walls in Cement Mortar 1:6 (1 cement:6 sand). including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.
1638.31
320
524259.2
... More
15 mm cement plaster on the rough side of brick/concrete/stone walls in Cement Mortar 1:6 (1 cement:6 sand). including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.
12
365
4380
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) to ceiling/sloppy roof including carriage of material in all leads and lifts.
906.12
206
186660.72
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. including carriage of material in all leads and lifts.
799.07
128
102280.96
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts.
375.02
118
44252.36
... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. including carriage of material in all leads and lifts.
12.96
46
596.16
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including carriage of material in all leads and lifts.
2288.9
114
260934.6
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials in ali leads and lifts.
4182.73
99
414090.27
... More
Providing and applying Melamine polishing on wood work (one or more coat).including cleaning the surface even and smooth including carriage of material in all leads and lifts.
167.89
106
17796.34
... More
Fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts.(L.R)
72
15
1080
... More
Stone solling properly hand packed filling interstices with spalls and consolidating with hand ramming including spreading watering and ramming of binding materials moorum or earth etc. complete as per H.P.P.W.D.specification 100mm spread thickness (finished work including materials and labour) including carriage of material in all leads and lifts.
23.63
757
17887.91
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick paver block of m-35 grade with approve colour and design and pattern including carriagr of material in all lead and lifts.
209.51
923
193377.73
... More
Fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(L.R)
22
1361
29942
... More
Fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.:(L.R)
22
230
5060
... More
Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Single/ Double Bowl.:(L.R)
8
1714
13712
... More
Fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.:(L.R)
14
32
448
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.including thicknessincluding carriage of material in all leads and lifts.
22
112
2464
... More
Fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.:(L.R)
22
99
2178
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia/40mm dia including thicknessincluding carriage of material in all leads and lifts.
34
122
4148
... More
Providing and fixing 100 mm steel grating or nahani trap.including thicknessincluding carriage of material in all leads and lifts.
62
97
6014
... More
Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions):(L.R)
14
599
8386
... More
Fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.:(L.R)
14
419
5866
... More
Fixing toilet paper holder : C.P. brass: including necessary secrews(L.R)
14
186
2604
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :100 mm dia
2.76
520
1435.2
... More
75 mm dia
4.14
372
1540.08
... More
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 75 mm including thicknessincluding carriage of material in all leads and lifts.
62
1139
70618
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.110 mm dia.including thicknessincluding carriage of material in all leads and lifts.
71.6
330
23628
... More
75 mm dia.
150.4
315
47376
... More
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.110 mm dia.including thicknessincluding carriage of material in all leads and lifts.
14
277
3878
... More
75 mm dia.
20
213
4260
... More
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.110 mm dia.including thicknessincluding carriage of material in all leads and lifts.
8
249
1992
... More
75 mm dia.
8
199
1592
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete110 mm dia.including thicknessincluding carriage of material in all leads and lifts.
14
178
2492
... More
75 mm dia.
20
128
2560
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.110 mm dia.including thicknessincluding carriage of material in all leads and lifts.
14
235
3290
... More
75 mm dia.
40
178
7120
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.110 mm dia
12
121
1452
... More
75 mm dia.
18
100
1800
... More
Providing and fixing air admitave valve (cowel) ISI marked including fixing with approved adhesive etc. complete110 mm dia.including thicknessincluding carriage of material in all leads and lifts.
5
185
925
... More
75 mm dia.
6
156
936
... More
Fixing towel ring round shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.:(L.R)
30
58
1740
... More
Fixing 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms:(L.R)
14
253
3542
... More
Fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.:(L.R)
14
2493
34902
... More
Fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws:(L.R)
22
215
4730
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.1216 (16 mm OD) pipeincluding thicknessincluding carriage of material in all leads and lifts.
164.72
417
68688.24
... More
1620 (20 mm OD) pipe
211.9
457
96838.3
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal boreincluding thicknessincluding carriage of material in all leads and lifts.
217.4
372
80872.8
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore including thicknessincluding carriage of material in all leads and lifts.
8
621
4968
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Vertical.including thicknessincluding carriage of material in all leads and lifts.
8
536
4288
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15mm nominal bore including thicknessincluding carriage of material in all leads and lifts.
66
138
9108
... More
Fixing C.P. brass shower rose with 15 or 20 mm inlet(L.R):
14
19
266
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design with common brunt clay FPS (non modular)brick Ist class designation 7.5 including thicknessincluding carriage of material in all leads and lifts. :
3
1806
5418
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design with common brunt clay FPS (non modular)brick Ist class designation 7.5 including thicknessincluding carriage of material in all leads and lifts.
1
11169
11169
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :20 mm nominal bore with including thicknessincluding carriage of material in all leads and lifts.
24
236
5664
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.cluding carriage of material in all leads and lifts.
8000
9
72000
... More
Fixing C.P. brass bib cock of approved quality conforming to IS:8931 15mm nominal bore(LR)
14
33
462
... More
Fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (LR)
38
40
1520
... More
Fixing Mixer for kitchen sink with casted swinging spout at top 15mm nominal bore (L.R.)
8
40
320
... More
Fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore(L.R.)
54
33
1782
... More
Fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (L.R.)
40
32
1280
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
70
79
5530
... More
Providing and laying upto floor two level cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete including form work in :String courses coping bed plates,
anchor blocks plain window sills and the like.cluding carriage of material in all leads and lifts.
1.28
11589
14833.92
... More
Providing & laying V-shape P.C.C. drain of size 45x25cm with cement concrete 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) and curing complete including form work etc thickness of concrete will be as 10cm complete as per the direction of the Engineer-in-charge.including carriage of material in all leads and lifts.
77.16
1081
83409.96
... More
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :upto 600 mm dia .including carriage of material in all leads and lifts.
0.28
18096
5066.88
... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :150 mm dia Ductile Iron Class K-9 pipes .including carriage of material in all leads and lifts.
54.8
1419
77761.2
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
24
297
7128
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .including carriage of material in all leads and lifts.
12
2421
29052
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
... More
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .including carriage of material in all leads and lifts.
4
11617
46468
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
... More
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.including carriage of material in all leads and lifts.
4
22752
91008
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20 mm diameter round bar including carriage of material in all leads and lifts.
26
359
9334
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.H D - 20, Circular shape 560 mm internal diameter including carriage of material in all leads and lifts.
1
1501
1501
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameter
1
573
573
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting (I) Ist courses of applying cement slurry cinotuergsrealocfeampepnlytinbgasceedmterenat tsmluernryt f@or 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off unction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).including carriage of material in all leads and lifts.
179.44
555
99589.2
... More
Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete :including carriage of material in all leads and lifts.
54
90
4860
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%