Himachal Pradesh Tourism Development Corporation Tender

ELECTRICAL CONTROL PANEL--Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type,fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable door, dust and vermin proof, powder coated of approved shade after 7 tank treatment process,cable alley ,interconnection with suitable size copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump and diesel pump set complete as per CPWD specification with following in coming and outgoings, suitable for operation on 415V,3 phase,50Hz Ac supply with enclosure protection class IP 42 as required: INCOMING:- 250A, 50KA 4pole MCCB, Ics= 100% Icu rating. Digital Voltmetre 0-500V with selector switch Digital Ammeter (0-400 A) with selector switch and CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps & Set of copper Bus Bar 300A OUTGOING:- All outing feeders for pumps should have digital ammeter with selector switchs, and LED type ON, OFF, trip indicating lamps) MAIN FIRE PUMP:-125 A, 50kA TPN MCCB, Icu=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload proction, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation-2 SETS JOCKEY PUMP:- 63 A, 50kA TPN MCCB, Icu=100% Icu, with suitable HP fully automatic Star/Delta starter with overload proction, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.-2SETS DETAIL OF DIESEL ENGINE CONTROL:- Control for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode. Indicating lamps for high/low lub. Oil pressure, high high water temp and engine on indication. Battery charge suitable for 12V/24V DC with boost and trickle selector switch,0-30V DC volt meter, and 0-20A dc Ammeter. All standard relays and accessories for automatic operation of deisel engine. SYSTEM CONTROLLER:- Designing, supply, installation, testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, terrace pump in sequence as per specification consisting of relays, timers, sensors, annuniciation window for fault indication, complete as per specification includingcarriage of material in all leads & lifts. Breakers should be of L&T/Schneider/ABB/Siemens/C&S make

SUB-HEAD E : HYDRANTS & ACCESSORIES.Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( Type-A) with blank Gunmetal/Stainless steel Cap and chain as required including carriage of material in all leads & lifts. Make:- Lifeguard/Minimax/Safefire Single headed Gunmetal

Supplying and fixing single headed external yard hydrant valve with 1 nos 63mm dia instantaneous FM Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( Type-A) with blank Gunmetal/Stainless steel Cap and chain as required including carriage of material in all leads & lifts. Make:- Lifeguard/Minimax/Safefire Single headed Gunmetal

Providing installation, testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nut, washers etc.as required including carriage of material in all leads & lifts. Make:- Zoloto/Kirloskar/Leader/Sant 65 mm dia

150 mm dia

Providing, installation, testingand commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia hole with stainless steel flange including carriage of material in all leads & lifts. Make:- Zoloto/Kirloskar/Leader/Sant 80 mm dia

150 mm dia

Supplying and fixing 63mm dia, 15 m RRL hose pipe with 63mm dia male and female coupling duly bound with GI wire, riverts etc. conforming to IS 636 (type-A) as required including carriage of material in all leads & lifts. Make:- Lifeguard/Minimax/Safefire Gun Metal

Supplying and fixing first-aid hose reel with MS construction spray painting in post office red, conforming to IS 884 complete with following as required.20mm nominal internal dia water hose thermoplastic (textile reinforced) type- 2 as per IS: 12585 20mm nominal internal gun metal globe valve and nozzle. Drum and brackets for fixing the equipments on wall Connections from riser with 25mm dia stop gun metal valve and M.S pipe and socket including carriage of material in all leads & lifts. Make:- Lifeguard/Minimax/Safefire 40 metre

Supplying and fixing 63mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzel conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required including carriage of material in all leads & lifts. Make:- Lifeguard/Minimax/Safefire Gun metal

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required including carriage of material in all leads & lifts. Make:- Lifeguard/Minimax/Safefire 2 way-100mm dia M.S pipe

4 way-150mm dia M.S pipe

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air relase valve on top and flange connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required including carriage of material in all leads & lifts. Make:- Lifeguard/Minimax/Safefire

Supply, fixing, testing and commission of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required including carriage of material in all leads & lifts. Make:- Zoloto / Kirloskar /Leader / Sant 40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hyraulically driven mechanical gong bell sound continuous alarm when the wet riser/sprinkler system activates, pressure gauge, emergency release, strainer, pressur switch, cock valve complete with drain valve and bypass, test control box, ball valve, MS pipe of required size, flange, orifice plate,gasket etc of following size as required including carriage of material in all leads & lifts. Make:- Zoloto/Kirloskar/Leader/Sant 150mm dia

Providing and fixing weather proof cabinet of size not less than 0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in red colour suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required including carriage of material in all leads & lifts. Make Lifeguard/Minimax/Safefire

Providing, fixing, testing and commissioning of pressure vessel (minimum 450 mm dia & 2000 mm height) for pressurization of hydrant system complete with pressure switches, pressure gauge, valves at outlet / drain to operate as per operating sequences including 80 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required including carriage of material in all leads & lifts. Make Agni/Lifeguard/Minimax/Safefire .

Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour including carriage of material in all leads & lifts. Make:- Agni/ Lifeguard/Minimax/Safefire .

Providing & fixing cast iron foot valve complete with flange including carriage of material in all leads & lifts. Make:- Zoloto/Kirloskar/Leader/Sant 150mm dia.

Supplying,installing,testing & commissioning 200 mm wide hot dip galvanised iron cable trays for Pumps of standard brand including carriage of material in all leads & lifts.

Providing and fixing standard firemans axe with heavy rubber handle including carriage of material in all leads & lifts.Make Lifeguard/Minimax/Safefire

Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm system, monitoring system including connections, interconnections etc complete as required. 2 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required alongwith 1 Set of Battery charger trickle cum boost to take complete load of fire alarm system complete with all accessories including providing and fixing of 2 Nos. 12 volt, 60 AH each sealed maintenance free batteries -1 set including connections, interconnections etc complete as required including carriage of material in all leads & lifts Panel Make:- Agni Suraksha/Minimax/System Sensor Battery: Exide/Amaron - 2 Nos. (one to act as standby)