Himachal Pradesh Irrigation And Public Health Department Tender

Providing horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Mather and Platt/KSB/Kirloskar as per BIS:1520-1980 / IS 5659-1970 with up to date amendments, read with BIS: 9137-1978 or latest edition suitable for lifting Raw water for under mentioned characteristics with CI impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to squirrel cage screen protected drip proof induction motor 2900 RPM of standard make such as Kirloskar/Crompton/NGEF and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 15% of the duty point head. The motor should be as per BIS: 325-1978 with up to date amendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:- Both the pumps will run Simultaneously.

Discahrge (Q) : - Total :- 16.970 LPS

Or 61.092 Cum/Hr