Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 4,66,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HBC_88909_1Bid Award Id
ViewTender No
2019/HPHC/JULY-13/ 18Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Ground Floor
551.06
112003
40.65
1st floor
215.37
48081
44.65
2nd floor
29.17
7096
48.65
Centering and shuttering for faces of walls, partitions, retaining walls, well steining and the like (ertical or battering) including attached pilaster,s buttresses etc (HSR 9.5) (CP 400%)
405.3
111154
54.85
Centring and shuttering for sides and soffits of beams haunchings, girders, bressumers and lintels as per HSR 9.7 (C.P.@400 %) Basement
326.78
100975
61.8
Ground Floor
497.49
143775
57.8
Ist floor
150.17
46403
61.8
Centering and shuttering for staircase with sloping soffits including riser and stringers (HSR 9.8) (CP 400%)
21.46
5462
50.9
Centring and shuttering for columns ( square or rectangular or polygonal in plan ) as per HSR 9.9(C.P.@400 %)
281.68
69645
49.45
Centring and shuttering for columsn (circular or curved in plan) as per HSR 9.10 (C.P.@ 400%) Basement
21.22
7151
67.4
Ground Floor
14.85
4707
63.4
Shuttering for faces of concrete foundations and foundations beams (vertical or battering), as per HSR 9.13 (C.P.@ 400%) Basement
232.64
40305
34.65
Ground Floor
163.85
25110
30.65
1st floor
83.84
14525
34.65
2nd floor
23.38
4518
38.65
Cement concrete 1 : 8: 16 with stone ballast 40 mm Nominal size in foundation and plinth., as per HSR 10.28 (C.P.@450 %)
18.16
31827
318.65
Cement concrete 1 : 4 : 8 with stone aggregate 20 mm Nominal size in foundation and plinth. As per HSR 10.38 (C.P 450%)
2.77
6399
420
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects., as per HSR 10.81+10.95a (C.P.@450 %)
4.26
24241
1034.6
Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in Slabsexcluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects.10.82 + 10.95(a) C.P 450% 1st Storey
1.87
11157
1084.8
Cement concrete 1:1 ½:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. As per HSR 10.86+10.95a +(C.P.@ 450%) 1st Storey
9.59
62701
1188.75
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) Footings etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. HSR 10.90+10.95a (C.P.@ 450%)
5.55
23626
774
First class brick work laid in cement sand mortar 1:6 in foundation and plinth.As per HSR No. 11.2+ (C.P @600%)
58.64
161503
393.45
First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. As per HSR No. 11.7 + (C.P @600%) 1st Storey
2.26
6557
414.45
11.43 cm thick brick wall laid in cement sand mortar 1:4 As per HSR No. 11.48 + (C.P @600%) 1st Storey
16.91
6522
55.1
2nd Storey
16.91
6635
56.05
Providing and fixing factory manufacture jail of reinforced cement conrert consist of cement , coarse sand and 10 mm and 8 mm dia for steel outer frame of jail will be 50mm wide and 25mm wide and 25 mm thick with smooth finishing as per design approved i/c fixing in osition upto any height with cement sand mortar 1:4 complete in all respect HSR 11.103 CP-0 %
44.41
28867
650
P&L autoclaved aerated (cellular) concrete light weight blocks (as per IS: 2185, part 3) having density of 550 to 650 kg/m3 and compressive strength of 4.0 N/mm2 masonary in non load bearing walls using 100 mm thick AAC blocks completed in all respect (ii) with polymer modified adhesive of rupted make as approved by Engineer-In-Charge in superstructure complete in all respect. HSR 11.104 (CP 0%) Basement
6.81
3315
486.8
Ground Floor
5.76
2766
480.15
1st Floor
19.23
9361
486.8
P&L autoclaved aerated (cellular) concrete light weight blocks (as per IS: 2185, part 3) having density of 550 to 650 kg. m3 and compressive strength of 4.0 N/mm2 masonary in non load bearing wall using more than 100 mm thick AAC blocks complete in all respect (ii) with polymer modified adhisive of reputed make as approved by Enginner-in-Charge in superstructure complete in all respect. HSR 11.105 (CP 0%) Basement
74.52
311997
4186.75
Ground Floor
96.95
400307
4129
1st Floor
52.29
218925
4186.75
2nd floor
20.61
87479
4244.5
Top khurra 0.6 m x 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR no. 13.50)240%
10
418
12.3
Cement concrete 1:1.5:3 gola 10 cm x 10 cm quadrant along junction of roof with parapet wall finished smooth where specially specified. (HSR13.64)240%
230.8
4732
6.03
Providing & Fixing PVC Rain water pipe 6 kg pressure of ISI mark in cement mortar during masonary work. As per HSR 13.89 (CP @ 20%) 150 mm dia
9.14
3692
336.65
100 mm dia
91.44
19970
182
Providing & fixing PVC Bend ISI mark as per HSR 13.90 (CP 20%) 150 mm dia
6
1191
165.4
100 mm dia
20
2338
97.4
Terracing consisting of 19mm thick heat resistant tiles for roof insulation, 300mm x 300mm laid on 20mm thick 1:3 cement coarse sand mortar including grouting with neat white cement over average 75mm thick screed of 1:8:16 including two coats of bitumen laid hot at 1.65 Kg per sqmt on top of RCC slab and cleaning of top surface complete. The tile shall be made of white cement blended with fibrous polymer having flextural stress value of 150kg/cm2 and thermal conductivity value 0.18 w/m.k., as per HSR 13.97 (C.P. @ 0%) 2nd Storey
346.77
359947
1038
3rd storey
175.93
183847
1045
4th storey
19.23
20230
1052
Screed of 50 mm thick cement concrete 1:2:4 to be laid below the topping, as per HSR 14.4 (C.P.@400 %) 1st Floor
867.99
66618
15.35
2nd Floor
149.01
11660
15.65
Conglomerate floor 25 mm thick cement concrete topping 1:2:4 HSR 14.8 ( C.P.+ 400%) 1st Storey
11.9
1333
22.4
Flat brick or tile flooring laid dry over a bed of 6 mm thick cement sand mortar 1:6 grouted with cement sand morar 1:4 and top surface to be left clean after wire brushing. HSR 14.24 ( C.P.+ 400%) 1st Storey
17.39
2782
32
Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. HSR 14.45 C.P 400%
143.25
72592
101.35
Kotah stone flooring 25mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone.HSR 14.62 CP 250% Basement
58.18
41184
202.25
Ground Floor
527.42
372794
201.95
1st Floor
38.59
27317
202.25
Kotah stone 20 mm thick in skirting risers of steps, dados, pillars and wall facing (lining) in any pattern laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc.HSR 14.66 CP 250% Basement
11.04
9169
237.3
Ground Floor
18.35
15221
237
1st Floor
45.23
37566
237.3
P/F vitrified tiles of size 600x600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement concrete coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note: Tile shall be of premium quality (first quality) of reputed manufacturer like : NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK & SIMPOLO As per (HSR No. 14.89) +(CP-15%) Basement Basement, G.F & 1st Floor
114.14
89675
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting /dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to matyh the shade to tiles. NOTE:- Tile shall be of premium quality(first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK. (HSR 14.90)(CP -15%)
12.92
10211
929.8
Pvdg & fixing ceramic tiles/anti skid tiles of size 400mm*400mm or above size of approved make in flooring,laid in any pattren as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with while cement sluury mixed with pigment to match the shade of tiles. Note: tile shall be primium quality (first quality) of reputed manufacturer like NOTCO,KAJARIA,SOMANI,ORIENT,JOHNSONS & RAK. HSR 14.91 C.P 0 %
49.93
26483
624
Pvdg & fixing 1st quailty ceramic glazed wall tiles confirming to ISO 15622(thikness to be specified by the manufacturer )of approved make in all colour shade expect burgundy,bottle green, black of any size as approved by Engineer-In-Charge in skirting,risers of stems and dados over 12mm thick cement coarse sand mortar 1:3 and jointed with while cement sluury mixed with pigment to match the shades complete. (b) Size of ceramic Giazed tiles 300*450mm HSR 14.92 C.P 0% Ground Floor + Basement
179.16
116123
648.15
12 mm thick cement plaster 1:4, as per HSR 15.5 (C.P.@500 %) Basement
313.8
24100
12.8
Ground Floor
1164
88697
12.7
1st Floor
241.69
18678
12.88
2nd Floor
153.36
12017
13.06
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.HSR 16.1 CP 230%
201.57
3060
4.6
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. HSR 16.2 CP 230%
201.57
2494
3.75
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.HSR 16.3 CP 230%
271.74
8429
9.4
Applying of priming coat with metal primer on new steel or iron work i/c preparation of surface.( Ist quality ) As per (HSR No.16.9)+ (CP 230%)
161.3
1677
3.15
Distempering with washable oil bound distemper (of approved manufacture) two coats including priming coat on new work. HSR 16.58 CP 230%
6839.75
205398
9.1
Providing two coats of exterior acrylic emulsion paint (b)1st quality. As per HSR No.16.79+ (C.P.@ 0%)
2679.36
431042
48.75
Providing and applying two coats white cement based putty over plastered surface and grinding the surface smoothwith sand paper to get an even and smooth finish including cost and carriage of all metrial, labour charges, scaffolding, sundries etc. complete(J.K./Birla Cement). HSR 16.81 CP 230%
2679.36
100355
11.35
Supplying and fixing hydraulic door closer I.S.I mark, with necessary screws, etc. Complete.as per HSR 17.82 © (C.P. @ 300%) ( C )I.S.I. designation No.III ( size of door 851mm to 1000mm
14
12124
216.5
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- HSR 17.93-note CP 165% commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges:- 25 mm thick
35.93
36862
387.15
35 mm thick
48.06
55548
436.15
Providing and fixing Aluminium work for doors,windods,ventilators and partitins with extruded built up standard tubular sections/appropiate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or withfixing clips or wiht expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sidea wiht required neopene felt etc aluminium sections shall be smooth ,rust free staright mitered and jointed mechanically wharever required including clean angle, Aluminium snap beading for glazing/paneling C.P brass/stainless steel screws,ect complete. Shutters of doors ,windows & ventilators including providing and fixing of hinges/pivote and making provision for fixing of fitting wherever required inculde the cost of PVC/neo[rene gasket required incuding Aluminimum fitting.HSR 17.96 CP 15%
360.92
111526
268.7
Providing and fixing glazing in aluminimum doods. Windows ventilator shutter and partitions etc with pvc/neoprene gasket etc complete (cost of aluminium snap beading shall be paid in basic items) HSR 17.98 CP 15% With flote glass panaes of 4.00mm thickness W
16.8
11766
609
Wrought iron and mild steel (using angles, flats squre bars, tees and channels)ladders,grills grating frames,window guards,iron doors openable or fixed stair case or parapet or any other type of railing,gates and tree guards stc. Including cost of scews and welding rods or bolts and nuts complete fixed in position.As per HSR (18.12) C.P 500%
19.26
120223
1040.35
Stair case railing of 40 mm internal dia G.I pipe class ‘B’ as per I.S. No. 1239 as hand rail using flats and square bars as supporting members and base plate welded as per design specified including cutting, welding rods and complete fixed in position. HSR 18.13 a CP 500%
1.56
10830
1157
Cold twisted deformed( ribbed/ TOR steel ) bars for R.C.C works where not included in the complete rate of RCC including bending, binding and placing in positon complete., as per HSR 18.22(C.P.@ 500%)
1087.55
6049279
927.05
Supplying and fixing glass panes including special metal sash putty of approved make HSR 18.30 CP 500% glass panes 4 mm thick, exceeding 40 sq dm areas.
72.42
50144
115.4
Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:-HSR 18.34 CP 500% door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate
73.38
25800
58.6
door and window frame of size 89mmx50mm with 40 mm wide single rebate.
136.55
58621
71.55
door and window frame of size 127 mm X 50 mm with 40 mm wide double rebate.
300.53
138484
76.8
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed. as per HSR 24.1 (C.P. 370%)
743.2
3229
92.45
Total HSR ITEMS
-
-
-
DSR CIVIL ITEMS
-
-
-
Pdg./Fixing in position Aluminium fittings ISI marked Powder coated of 50 micron for doors and windows i/c screws complete in all respect DSR 2016 Sliding Bolt (250mm x 16mm) 9.96.2
35
6622
189.2
Sliding Bolt (300mm x 16mm) 9.96.1
2
425
212.45
Tower bolt (200 x 10mm) 9.97.3
17
1295
76.15
Tower bolt (150 x 10mm) 9.97.4
37
2379
64.3
Tower Bolt (100 mm x 10 mm) 9.97.5
44
2165
49.2
Handle (125mm) NS
38
1942
51.1
Handle (100mm) 9.100.2
44
1984
45.1
Handle (200mm) NS
36
2052
57
I Hook NS
22
660
30
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in approved design. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. All completed as per direction of Engineer-incharge. DSR 2016/ 11.53
48.31
77477
1603.75
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. DSR 2016/ 16.68
278.7
171596
615.7
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) DSR 2016/ 16.69
5.09
25514
5012.65
Extra for providing & making hardening compound of approved qualityDSR 2016/ 16.44
566
26291
46.45
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. DSR 2016 /13.78
4063.91
883291
217.35
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR 10.28
425.06
200798
472.4
Total DSR CIVIL ITEMS
-
-
-
NS CIVIL ITEMS
-
-
-
Applying priming coat on exterior plastered surface complete in all respect. NS
2679.36
68860
25.7
Providing & fixing of red stone in all shades in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 complete in all respect as per approved NS
35.74
26948
754
Cutting grooves in cement concrete work in Road / Taxi track of size 4mmx50mm etc complete
384.05
10753
28
Finishing and laid Cement concrete with vaccum dewatering system surface and fine trowel complete in all respect.
743.2
45893
61.75
P & F stainless steel wire mess jali of 22 gauge, clear aperture 1.4mm in 304 grade in aluminium door & window in aluminium section including PVC/Neoprone gasket & Labour for fixing (excluding the coast of beading, channel etc, the same will be paid in aluminium work
92.02
73616
800
Extra on account of labour for plaster for cornice RCC/Brick work in facia/parapet of various building in any design/ any height
176.59
22462
127.2
Making of Corbelling of RCC 1:1.5:3 i/c shuttering as per design NS
176.59
47026
266.3
Providing & Laying ready mix concrete M-25 grade concrete for RCC in fully automatic batching plant and transported to site of work in transit mixer including pumping of RMC from transit mixer to site of laying excluding the cost of centring and shuttering, finishing the reinforcement including cost of admixtures in recommended proportions as per IS 9103 to accelerate / tetard setting of concrete improve workability with impairing strength and durability as per direction of Engineer in Charge with 340 Kg of cement.
1257.92
7395312
5879
Providing and cutting hole size 100 to 125 mm dia in RCC through core cutter machine complete
16
11034
689.6
Providing & Laying ready mix concrete M-10 grade concrete for RCC in fully automatic batching plant and transported to site of work in transit mixer including pumping of RMC from transit mixer to site of laying excluding the cost of centring and shuttering, finishing the reinforcement including cost of admixtures in recommended proportions as per IS 9103 to accelerate / tetard setting of concrete improve workability with impairing strength and durability as per direction of Engineer in Charge with 220 Kg of cement.
162.98
748893
4595
Providing & laying granite stone of superior quality not less than 17mm thick laid over 12mm thick cement mortor 1:3 and jointed with neat cement slurry mixed with pigment to match the shade complete in all respect to the entire satisfaction of Engineer-in- Charge
4.88
14523
2976
Total NS CIVIL ITEMS
-
-
-
HSR PH ITEMS
-
-
-
Earth work in excavation in foundations, trenches Of under ground structures sullage drains, etc., and Other similar works in ordinary soild including Dressing of bottom and sides, to correct levels and templates, cutting Of trees and bushes, dewatering of rain water, diversion of traffic, fixing And maintenance of caution boards, and night singnals, crossing over Trenches for access to houses, watching stacking of excavated soil, clear From the edge of excavation, and subsequent filling, where required around Masonry, in 15 cm layers, with compaction and disposal of surplus Soil as directed within a lead of 30 metres for depth upto 2 METRES BELOW NATURAL GROUND LEVEL (For Public Health works only)as per HSR 6.7 ( CP @ 370% )
63.79
2794
932
Excavation of trenches in streets, lanes or in Open areas for storm sewer, sewers running by Gravity nd manholes to full depths as shown In drawings including shoring timbering of Poling boards, frame System type, dressing to correct Sections and dimensions, according to templates and levels, Dewatering, provision for diversion of traffic, cutting trees and Bushes etc. Night signals, profiles, pegs, sight rails, oning rods,Crossing over trenches for access to the houses, watching fencing, Etc., fixing and maintenance of caution boards, refilling of trenches, Watering of refill, in 15 m layers, ramming and restoration of Unmetalled or unpaved surface to original condition and removal Of surplus soil from site of work, upto a lead of 1 Km in ordinary soil., as per HSR6.10a (C.P.@ 370%) For depth not exceeding 3 Mtr depth.
53.06
2965
1189
CUTTING HOLES UPTO 23 CM SQUARE THROUGH STONE MASONARY OR BRICK WORK IN CEMENT WALLS FOR PIPES AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND FINISHING according to existing finish where required., as per HSR 28.24 (C.P.@300 %) (a) 11.43 cm thickness of the walls
10
560
14
b) 22.86 cm thickness of the walls
20
1628
20.35
P/F in brass / gunmetal ferrules by drillign and tapping cast iron / DI / GI pipe line of all diameter and making connections i/c carraige, loading, unloading etc. complete in all respect, to the satisfaction of Engineer -in charge (excavation will be paid separately). (HSR 28.54 + CP 10%) 10mm i/d ferrule
1
169
154
Constructing brick masonry inspection chambers sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/C.C. topping. 50 mm thick with 455 mm x 455 mm/ 455 mm x 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design.(HSR 29.84) (Derived Rate) CP 450 % (c) size 600 mm x 900 mm inside ( with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg. With R.C.C. slab)
15
43682
529.48
Providing and Fixing SFRC manhole covers and frames marked with IS:12592 including setting the same to correct lines & levels in 1:2 cement sand mortar over manhole including carraige, loading, unloading, stacking, handling, rehandling etc. complete in all respect to the satisfaction of Engineer- in - charges, as per HSR 29.94 (C.P.@ 5%) Type : Extra heavy duty set (HD-20) 560mm clear opening
17
19635
1100
Providing SALT GLAZED STONE WARE PIPEWS GRADE 'A; IN STANDARD LENGTH OF 600 mm each pipe marked with IS: 651 AND THEIR LOWERING , CUTTING, JOINTING AND TESTING AS DESCRIBED IN hsr ITEM No. 29.38,29.39.29.40 including the cost of joointing materials as well a carriage, loading ,unloding , stacking, handling, re-handling etc, complete in all respects to thesatisfaction of Engineer-in-charge.per HSR 29.95 (iv) (C.P.@5%) b) 150mm dia
571.5
119415
199
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF TWO URINALS FLAT BACK OR ANGULAR LIPPED FRONT 610 HIGH IN VITREOUS CHINA-WARE WITHOUT 5 LITRES CAPACITY BEST INDIAN MAKE C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE ETC., COMPLETE AS FULLY DESCRIBED IN ITEM NO. 30.25 ABOVE. as per HSR 30.26 (CP @ 340%) Derived Rate Range of Two urinals (i) White
3
17760
1345.47
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D INLET.(C) C.P brass with revolving joint HSR 30.66 CP 340%
4
2147
122
P/F in position best Indian make paper holders fixed into wall with C.P. brass screws complete in all respects including cutting and making goods with walls etc. HSR. 30.67 (a) CP.340%
4
484
27.5
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.68 + CP 340%) (a) 25 MM DIA C.P BRASS ADJUSTABLE (ii) 600 mm long.
4
1074
61
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. 30.70 a i(CP 340%)Soap dish 160 mm
4
1038
59
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. a) Indian make, As per HSR No. 30.71+ (C.P.@ 340%) a(ii) 600 x 450mm
4
1883
107
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE COAT AND HAT HOOKS fixed into wall with C.P Brass screws and rawl plugs etc. COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. As per HSR No. 30.73+ (C.P.@ 340%) C.P BRASS Two way
20
3784
43
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) HSR 30.75 CP 340% Bib cock long body
10
5104
116
Bib cock Short body
4
1848
105
Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) HSR 30.76 CP 340% 15 MM STOP COCK Stop cock male and female end
24
10666
101
Concealed stop cock with flange.
6
3432
130
Providing and fixing C.P brass liquid soap container of best quality (as required by the Engineer-in-charge) HSR 30.77 CP 340%
4
924
52.5
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS. HSR 30.93 c CP 300% 15 mm alkahene pipe inlet connection+B5656
20
840
10.5
PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS HSR 30.110 CP 340% 20 mm internal diameter
5
1056
48
PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN, minimum depth of water should be 150 mm with a minimum seal 50 mm. HSR 30.114 CP 340% 100 mm internal diameter S.W. gully trap
4
2922
166
Providing and fixing HDPE WATER STOREGE TANKS of Sintex,Dipast,O.K Superme make with covers/lods marked with IS:12701 on roof top of building including cost of hoisting and placing in position ,making connections with inlet and outlet pipes,providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples,washers,flanges for connection in tanks complete in all respect to satsfaction of Engineer-In-Charge.(Expect civil work). HSR 30.119 CP 0% 1000 ltr.capacity
5
26315
5263
Total HSR PH ITEMS
-
-
-
DSR PH ITEMS
-
-
-
Providing and fixing white vitreous china pedestal type water closet (Europeantype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : DSR 17.2/ 2016 W.C. pan with ISI marked white solid plastic seat and lid 17.2.1
2
6837
3418.7
DSR 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: DSR 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
6988
3494.2
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and the cost of
cutting chases and making good the same including testing of joints complete
as per direction of Engineer in Charge. Internal work - Exposed on wall DSR 18.8.1 15 mm dia nominal outer dia pipe
15.54
3826
246.2
18.8.2 20 mm dia nominal outer Dia pipe DSR 18.11.2
37.49
10679
284.85
18.7.3 32 mm dia nominal outer dia pipe
35.05
14472
412.9
P/F PVC waste pipe for sink or wash basin i/c PVC Waste pipe fitting complete Semi riged Pipe 32mm dia DSR 17.28.1.1
11
832
75.6
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1A 20 mm nominal bore
10
3966
396.55
18.17.2 32 mm nominal bore
5
2504
500.75
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (i) Kitchen Sink with drain board 510x1040 mm bowl depth 200 mm DSR 17.10.1.3
1
3772
3772.35
Providing and fixing union coupling for GI pipes. DSR 18.46 a) 15mm i/d of pipe line
5
1179
235.75
b) 20mm i/d of pipeline
10
2612
261.15
d) 32mm i/d of pipeline
5
1921
384.25
Total DSR PH ITEMS
-
-
-
NS PH ITEMS
-
-
-
Pdg. & fixing SWR UPVC pipe classic type ‘B’ and specials ISI marked (Kissan, Prince, Finolex make) including fitting joint solvent mixture complete in all respect- a) 110mm dia
95.71
30240
315.95
b) 90mm dia
51.82
13541
261.3
Specials for 110mm dia pipe i) Cowel
2
59
29.25
ii) Clamp
50
1440
28.8
iii) Door Bend
6
996
166
v) socket
30
2597
86.55
Door Tee
14
2324
166
vi) single junction with door
10
1660
166
b) 90mm dia pipe i) Cowel
2
51
25.4
ii) clamp
10
280
28
iii) Bend
4
364
90.95
iv) socket
15
1094
72.9
Door Tee
6
810
135
v) single junction with door
4
565
141.15
vi) Floor trap
18
1959
108.85
Pdg. and fixing in position CP jali ( brass ) of heavy quality,100mm dia of standard make approved by Engineer Incharge, complete in all respect (make, Viking, Chilly, Camry) N.S.
18
3600
200
Providing & Fixing in position MS Hooks for GI Pipe Line complete NS
50
500
10
Providing & Fixing in position under counter wash basin round/ Jaquare make with fitting complete (Cat No. WB-02)
4
5760
1440
Total NS PH
-
-
-
E.I. (HSR) PART
-
-
-
Supply and Erection of miniature circuit breaker/isolator 240/415 Volts in existing distribution board i/c making necessary connections, as per HSR 31.17 (C.P.@ 30%) (A) Miniature circuit breakers of 9 KA breaking capacity. ii) SPMCB 6 Amp to 32 amp
64
7904
95
iii) SPNMCB 40/63 Amp
1
312
240
ii) TPN MCB -32 Amp
12
6287
403
Supply and Erection OF FITTING AND ACCESSORIES as per HSR 31.18 (C.P.@ 200%) xi) Bakilite angle/straight button holder large size.
44
818
6.2
xvii) Ceiling rose flush / Surface type
27
324
4
xxvi) S/E of hexagonal MS box 1.6mm thick, 8cm,7.5cm deep top covered with MS lid by means of screws i/c 10mm dia. 30cm long MS rod made into suitable suspension hook & with 3mm thick backlite sheet erected in RCC slab complete.
35
2762
26.3
EARTHING, as per HSR 31.22 (C.P.@ 350 %) iii)Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.
2
4077
453
v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
2
1674
186
xv)Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.
40
3654
20.3
Erection and carriage of fans ( HSR - 31.20 ) ( CP - 130%) i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station/Good transport/PWD store to the site of work.
35
1047
13
Supply and Erectionof under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches as per HSR 31.26 (C.P.@ 140 %) xlii) 35 sq mm, 4 Core cable (Armd)
180
28426
65.8
STREET LIGHT. (HSR 31.30) (CP 270%) xv) Supply and erection of 32 mm dia meter 1.5 m long bracket (B-class) making an angle of 10o to 15o with horizontal plane for mounting street light fitting fixing of G.I. brackets on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps Including cost of cutting, welding of G.I pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.
2
755
102
S/E suitable compression type brass cable gland for under ground cable. (HSR 31.28) (CP 140%) iii) 25 Sqmm to 50 Sqmm 2 to 4 core.
2
81
16.8
MISCELLANEOUS: , as per HSR 31.35 (C.P.@130 %) ix)S/E of al. lugs heavy duty i/c crimping etc. upto the entire satisfaction of the Engineer-in-Charge of the works. (f) 35 Sq mm
8
46
2.5
Supply & Erection PVC unsheathed Copper conductor cable single core 1100 Volts grade in pipe of suitable size( excluding cost and erection of pipe), as per HSR 31.40 (C.P.@10%) (i) Size 1.50 Sqmm
2500
28050
10.2
(iii) Size 4.00 Sqmm
400
10780
24.5
iv) Size 6.00 Sqmm
180
7049
35.6
SHEET STEEL ENCLOSURE: Supply & erection of sheet steel enclosure Double door distribution boards suitable for MCBs etc. recessed in wall with rag bolts i/c bonding to earth& necessary connections, as per HSR 31.41 (C.P.@ 10%) iii) SP&N 12 way (Horizontal)
2
2442
1110
ix) TP&N -4 way (Vertical)
6
25410
3850
P/F Modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. HSR 31.56(C.P.@ 0 %) fan regulator
35
13895
397
Blanking Plate
55
1375
25
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate i/c concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required to complete the job in all respect as per HSR 31.57(C.P@0%) 1& 2 module
5
505
101
Supply, installation,testing and commissioning of wall / free standing floor mounting dust and vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment / switch wear.Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3mm thick for separately cable alloey to BBC from switch chamber extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring ( copper) and fuse protection (Only outer area on all sides shall be measured) as per HSR 31.63 (C.P @ 0%)
3.5
7560
2160
Supplying and fixing of copper bus bar duly tinned by means of SMC/ DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect as per HSR 31.64 (C.P @ 0%)
3.5
1838
525
Pdg. and fixing digital metering equipment for LT cubical Panel consisting of 96mmx96mm 0-500V, volt meter with selector switch, Amp. meter (of required ratio up to 600/5 amp.) with selector switch and required C.Ts 3 Nos., a set of 3 no phase indicating lamps RYB LED. HSR 31.65 (C.P @ 0%)
1
4050
4050
Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material reqd. to complete the job in all respect..HSR 31.66 (C.P @ 0%) i) Rotary handle up to 125A, MCCB
3
2025
675
S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work. HSR 31.67 (C.P @ 0%) i) HDPE pipe 63 / 50 mm outer dia / inner dia.
160
15200
95
Supply and erection of moulded case circuit breaker single pole/four pole on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.69) (CP 0%) iv) Four Pole MCCB 6 to 63 Amp
2
10305
5152.5
v) Four Pole MCCB 100 Amp
1
5347
5347
Supply and laying muticore telephone cable condoctor 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/ channel and making necessary connection complete in all respect and upto the entire satisfaction of the Engineer- in - Charge of the work. HSR 31.78 (C.P @ 0%) i) 2 Pair telephone wire
500
3970
7.94
ii) 5 Pair telephone wire
150
2850
19
Supply and erection of Hot water pipe medium clas ( B- class) GI as per IS 1239 with 25mm thick insulation of 48 kg/cu.m. density and K value + 0.03 W/MK R value +1.67 sq.m C/W to withstand and temp. of 250deg.,erected in wall or surface including all labour and material required to complete the job in all respect. (HSR 30.120 CP -0%) b) 20mm internal dia of pipe line
30
9060
302
supply and erection of Taps of made of Gunmetal ISI marked including all labour and material required to complete the job in all respect. (HSR 30.121 CP-0%) b) 20mm dia
4
1120
280
Supply, installation , testing and Commisioning of solar water heating system with copper Absorber made of copper sheet 34 gauge/copper tube ( at least 10nos.) 12.7mm dia 0.56 mm thick riders and 2 nos headers of copper tube dia 25mm thickness,0.71mm with flat plate collector length 1860mm, width 1240mm and height 100mm.The collector box shall be of aluminum extruded channel of size 100 mm x 25mm and 1.6 mm thick. All water carriage system system should with stand 4.5 Kg. cmsq pressure, complete duly insulated from back and front with glazing with stainless steel storage tank( insulated), with temperaature gauge, strainer,water meter 2nos. and HDPE/LDPE cold water tank duly erected on existing MS angle/channel stand with suitable electric backup its control and wiring etc. duly erected on roof top including all labour amd material required to complete the job in all respect. (HSR 30.123 CP -0%) v) 500 LPD Capacity
1
95700
95700
TOTAL E.I. (HSR)
-
-
-
E.I. (N.S.) PART
-
-
-
Wiring in 1.5 sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & outer face plates complete (recessed type). (i) Fan Point with 10 amp one way switch :- b) Medium Point
11
5500
500
(c) Long point
24
16752
698
(ii) Light Point with 10 amp one way switch :- a) Short Point
42
12810
305
b) Medium Point
50
23650
473
c) Long Point
73
48983
671
(iii) Twin Control Light Point with 2 way 10 amp switch:- b) Medium Point
1
545
545
(c) Long
7
5474
782
(v) 5 Pin light plug point with 10 A switch & 10 A socket (wiring with 3 nos. copper wires of 1.50 Sqmm including earth wire for 3rd pin) a) Short Point
37
17131
463
(c) Long point
9
8118
902
(vi) 5 Pin power plug point with 20 A switch & 16 A socket (wiring with 3 nos. copper wires of 4.00 Sqmm including earth wire for 3rd pin) b) Medium point
1
1018
1018
(c) Long point
21
29820
1420
S/E PVC pipe ISI Marked heavy guage i/c bend inspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect . i) 25mm dia on recessed
400
18000
45
ii) 25mm dia on surface
150
5850
39
iii) 32mm dia on recessed
30
1590
53
iv) 32mm dia on surface
20
960
48
Supply and erection of modular type switch socket accessories on existing modular box. a) Modular telephone socket jack with shutter RJ-11
5
715
143
S/E of fresh air fans(Exhaust fan) 200mm sweep PVC body with louver shutter, suitable for single phase A.C 230 volts, 50Hz supply complete with all labour and petty material required to complete the job. C.G model Briskair or Havells Model Ventilair DX
7
9716
1388
S/E of ISI marked propeller type ventilation fans (Exhaust fan) Size 300 mm, 1400 rpm Heavy Duty suitable for single phase A.C. 230 Volts, 50 HZ supply, A.C capacitor run conferming to IS:23/2/67 , complete with mounting ring with four no.s fixing holes without regulator as per rate contract specifications.with all labour and petty material required. C.G Model Heavy duty Havells Turbo force
20
58280
2914
Supply and erection of 300 mm aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National make)
20
7300
365
Supply, Testing & Commissioning of wall fan 16" sweep (400mm) Oscillating type complete with built-in regulator. The fan is to fixed on wall with suitable fixing arrangement including connection from nearest light point with cost of Cu wire required (Make-Havell's & Model-PLATINA / Crompton make & Model-HIGH FLOW LG White only) ..
1
2080
2080
Supply and erection of Surface / Recess mounting LED 6000 K luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same in ceiling with required material & making necessary connections etc :- i) LED 8/12W Round/ Square Fitting surface mounting
12
20808
1734
ii) LED 15/18 W Round/ Square Fitting surface mounting
69
128616
1864
S/E of surface mounting LED Batten fitting 1x 18 /20 watt, (4 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect.
16
9056
566
S/E of LED 10Watt rectangular bulk head fitting complete with 10watt LED Lamp & opal diffuser i/c erection of fitting on Wall & making necessary connection with wire complete with all labour & other petty material required.(Endura Rugby in Havell's/ Philips/Crmpton/ Wipro/ Bajaj- Make )
3
1065
355
S/E of 45 watt LED 6K, die cast aluminium street light luminaire with IP-65 Protection suitable for operation on 230 volts A.C supply complete in all respect. Make Havells Model LHETAXU7PN63045 or equilent
2
9156
4578
S/E of 50/53/60 watt LED Flood Light pressure die cast housing with IP-65 Protection ( Discreet type) suitable for operation on 230 volts A.C supply and efficient LED output for better distribution to be mount on existing building/ terrace complete in all respect. C.G Model LFLE50CDC or eqilent
7
32025
4575
S/E PVC insulated 3 core, 1.50 sqmm copper conducter cable(unarmoured), 1100V, grade in existing pipe/pole, complete with all labour and petty material required i/c making necesary connections.
45
1845
41
S/E of hot press moulded SMC junction box (Sintex, Hansel, Somshiva) with hinged cover on existing pole/wall complete with clamps, nuts & bolts, DIN channel for erection of SPMCB/TPNMCB and copper terminal block for 3 phase 4 wire system including labour, petty material and making necessary connections etc but excluding cost of MCB. (i) Size 185 mm x 165 mm x 60 mm (inside) & 225 mm x 205 mm x 65 mm (outside)
2
1718
859
S/E of fire existingushers duly erected/hangs on wall with hooks i/c the cost of hook, screws etc with all labour and material required to complete the job in all respect to the entire satisfaction of the Engineer- in - Charge of the work. i) ABC type 4 Kg capacity
10
22800
2280
ii) CO2 type 4.5 Kg capacity
10
66800
6680
Supply, installation, testing and commissioning of Rooftop Grid interactive SPV Power Plants of 2 KWp (DC output) but without Battery bank ( Solar panels of 250 wp X 8 nos. poly crystalline modules) including Comprehensive maintenance for a period of 5 years from date of commissioning of the system including on grid string inverter as per HAREDA/MNRE Terms & conditions & Techanical specifications complete with Module mounting structure for RCC roof, AC & DC copper cables,Earthing for solar structure and inverter including arrestor & ACDB box, metal trays, conducting material, switches, SPD's, AC/DC disconnect, clips, fasteners etc. as reqd.to complete all Civil, Mechanical & Electrical works of the system.
5000
208500
41.7
S/I/T/C of water cooler stainless steel body with 150 ltr /hr and 150 ltr storage capacity / Bluntor/,Sidwal,Voltas Make) complete in all respect i/c all labour and petty material.
1
49185
49185
Supply & Erection of Commercial Mineral RO system of 40 Ltr/ hr. water Purification Capacity i/c fixing on wall with all petty material and labour reqd. (Make-Kent & Model-Elite-1 mineral RO-1052 equivallent make in)
2
76600
38300
Supply and erection of 55” LED Commercial TV (Pansonic – Make & Model –m LH-55-RM1DX or equivalent model of Samsung/ Sony ) complete in all respect including making necessary connections etc.but w/o cost of TV Cable & Set up box & disc.
1
100750
100750
Supply & Erection of PVC Channel/Batten 40 X 60 mm i/c fixing on wall complete with all labour & petty material reqd. to complete the job.
10
2430
243
S/E of PVC batten of size 25 mm x 16 mm double lock system,good quality fixed on roof /wall complete in all respect i/c petty material required to complete the job.
30
600
20
Supply installation,testing and commisioning of 2 MP, IP Camera with IR Image Sensor, 1/2.8” Progressive Scan CMOS, Lens 4mm @ F 2.0, Day Night IR cut filter with auto switch,Auto compression G.711/G.722.1/G.726/MP2L2, Image Resolution 1920x 1080,Network Storage Built in Micro SD/SDHC/SDXC slot, upto 128G, NAS (NFS,SMB/CIFS), Wifi range 50m, Power supply 12 V DC plus minus,10%, PoE, IP 67 complete in all respect including making necessary connections etc. ( Make – Hikvision or equivalent in CP Plus/Dahua )
12
80256
6688
Supply, installation, testing and commisioning of 16 Channel NVR ( Make-Hikvision /CP Plus / Dahua ), with 2 SATA port & 2 USB Port Simultaneous live monitoring, recording, playback, backup and remote access, video recording Continuous, schedule, manual, alarm triggered; Protection of recordings upto 30days, backup External storage device via USB; PC or network drive via LAN,video out put HDMI, VGA (D-Sub),supply voltage 230 VAC i/c 2 Nos 4000GB (4 TB) Hard disc ( Western Digital - Make & Model-Survelliance Purpple) complete in all respect including making necessary connections & other petty material etc.
1
51897
51897
Supply installation,testing and commisioning of Wall Mounted Racks 9U ( 550x 480x450)mm with two fans and 15and 5 amp power sockets and all required accessories ( NWR Make & Model-9U-5045 or equivalent in Data Rack /President ) & 1no. 16port L-3 managed POE giga byte Switchers (make-CISCO in D- LINK), 1no. 16port patch panel Loaded (make-D- LINK) & 1no. cable manager (make-D -LINK), 10nos patch cord of 1mtr. length complete in all respect including making necessary connections & other petty material etc.
1
38675
38675
Supply and erection of VGA/HDMI Cable i/c connectors ( Falcon / Beldon - Make ) for NVR/Switcher/LED Monitor in existing PVC conduit pipe complete in all respect including making necessary connections etc.
10
4420
442
Total Electrical NS Amount
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements