Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 5,54,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HBC_86487_1Bid Award Id
ViewTender No
2019/HPHC/JULY-11/ 04Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Clearing grass and removal of the rubbish upto distance of outside the periphery of the area cleared. HSR 6.27 CP370%
15515.51
-
21.45
Cement conc. 1:8:16 with brick ballast 40mm nominal size in foundation and plinth. (HSR 10.26) (CP 450%)
89.99
-
300.2
Cement concrete 1 : 6 : 12 with stone aggregate 40 mm Nominal size in foundation and plinth.(HSR 10.32)(CP 450%)
159.81
-
348.25
Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.39) CP.450%
87.28
-
403.1
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41) (CP 450%)
3.02
-
615.6
ement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level. (HSR 10.59) (CP 450%)
0.47
-
629.15
3rd Storey
0.84
-
636.45
4th Storey
0.12
-
643.75
Cement concrete 1:1 ½:3 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level.(HSR 10.60) (CP 450%)
14.26
-
708.75
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (10.81+10.95)(C.P 450%) Ist storey
4.25
-
1034.6
2nd storey
1.78
-
1041.9
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects.(HSR 10.82+10.95)(C.P 450%) Ist storey
91.16
-
1084.8
2rd storey
64.24
-
1092.1
3rd Storey
2.81
-
1099.4
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects.(HSR10.86+10.95)(CP450%) Ist storey
361.74
-
1188.75
2rd storey
67.55
-
1196.05
3rd Storey
4.55
-
1203.35
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by Item Nos. 10.82, 10.86 to 10.88 not exceeding 10 cm thickness excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects.(HSR 10.89+10.95(a))(CP 450%) 2nd Storey
0.95
-
1716.25
Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement complete in all respect (HSR 10.90+10.95(a)) (CP 450%)
142.8
-
774
Cement conc. 1:1.5:3 with stone aggregate 20mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, i/c consolidation, finishing and tamping complete (HSR 10.132+10.95(a)) (CP 450%)
97.8
-
729.3
First class brick work laid in cement sand mortar 1:6 in foundation and plinth.(HSR11.2)(CP600%)
119.22
-
393.45
First class brick work laid in cement sand mortar 1:4 in foundation and plinth. (HSR 11.4) (CP 600%)
118.3
-
424.6
First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinthlevel.(HSR11.7)(CP600%) 4th storey
1.94
-
439.2
11.43 cm thick brick wall laid in cement (HSR 11.48(a)(CP 600%) 3rd Storey
7.3
-
57
Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plster 1:4 or pointing, as required. (HSR 11.78)CP600% 2rd storey
304.16
-
7.2
P/L autoclaved aerated (cellular) concrete light weight blocks (as per IS:2185, Part 3) masonary in non load bearing walls using block of size 625mmx250mmx100mm with cement sand mortar 1:4 in superstructure complete in all respect. (HSR 11.104) CP 0% 1st Storey
179.64
-
480.15
2rd storey
311.79
-
486.8
3rd storey
7.3
-
493.45
P/L Autoclaved Aerated (cellular) concrete light weight blocks (as per IS: 2185, part 3) masonary in nonload bearing walls using block of size 625mmx250x200mm with cement sand mortar 1:6 in superstructure complete in all respect. HSR.11.105 CP.0% 1st Storey
379.9
-
4129
2rd storey
115.88
-
4186.75
3rd storey
56.19
-
4244.5
4th storey
1.94
-
4302.25
Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16(HSR13.50)(CP240%)
11
-
12.3
Cement concrete 1:1.5:3 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64) (CP 240%)
263.83
-
6.03
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work.(HSR13.89)(CP20%) a) 100 mm
164.9
-
182
Providing and fixing PVC bend ISI mark. A)100MMDIA (HSR13.90a)(CP20%)
29
-
97.4
Terracing consisting of 19mm thick heat resistant tiles for roof insulation 300x300mm laid on 20mm thick 1:3 cement sand mortar i/c grouting (HSR 13.97) CP 0%. (HSR 13.97) CP 0% 3rd storey
402.96
-
1045
4th storey
16.3
-
1052
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1) (CP 400%)
569.1
-
36.95
Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping (HSR 14.4) (CP 400%)
519.68
-
15.35
Conglomerate floor 25mm thick cement concrete topping 1:2:4 (HSR 14.8) CP 400%
1088.8
-
22.4
Conglomerate floor 40mm thick cement concrete topping 1:2:4. HSR.14.9 CP 400%
15
-
31.5
Precast coloured chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings.(HSR 14.45+Note) CP 400% 1st Storey
149.11
-
111.48
Extra for nosing in marble stone for treads. (HSR 14.50) (CP 90%) (Labour rate only)
118.11
-
19
Kotah stone flooring 25 mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.(HSR14.62)(CP250%) 1st Storey
294.89
-
201.95
2ndstorey
99.25
-
202.25
Extra for nosing in treads of steps of Kotah Stone slab. HSR.14.65. CP.200%(Labour rate)
26.82
-
6.1
Kota stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR 14.66) (CP 250%) 1st Storey
23.97
-
237
2nd Storey
12.62
-
237.3
Providing & fixing virtified tiles of size 600x 600mm of approved make in floori-ng laid in any pattern as specified over 20 mm thick cement coarse sand mort-ar 1:3 and jointed with white cement slu-rry mixed wih pigment to match the shade to tiles (HSR 14.89) CP.-15%
583.29
-
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting /dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to matyh the shade to tiles. NOTE:- Tile shall be of premium quality(first qualit) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS & RAK.(HSR 14.90)(CP -15%)
43.18
-
929.8
Providing and fixing ceramic tiles/ anti skid tiles of size of size 400mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thic cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. NOTE:- Tile shall be of premium quality(first qualit) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS & RAK.(HSR 14.91)(CP -15%) 1st Storey
80.56
-
624
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thic bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete(HSR14.92) CP.0% (a) 300 mm × 450 mm
270.81
-
648.15
Laying and fixing Baroda Green Marble stone in all shades 15mm to 18mm thick in skirting/dado,riser of steps, pillars and wall facing ,laid in any pattren as specified over base of 12mm thick cement coarse sand motar 1:3 and joineted with while cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels ect. (excluding the cost of granite stone) (HSR 14.95) (CP 0%)
29.44
-
1267
Laying and fixing Baroda Green Marble stone in all shades 15mm to 18mm thick in skirting/dado,riser of steps, pillars and wall facing ,laid in any pattren as specified over base of 12mm thick cement coarse sand motar 1:3 and joineted with while cement slurry mixed with pigment to match the shade of granite granite stone (excluding the cost of granite stone) (HSR 14.96) (CP 0%)
107.39
-
1281
12mm thick cement plaster 1:4 (HSR 15.5) (CP 500%) 1st storey.
3295.91
-
12.7
2nd storey
498.77
-
12.88
3rd storey
182.67
-
13.06
4th storey
14.42
-
13.24
15mm thick cement plaster 1:4 (HSR 15.10)(CP 500%) 1st Storey
1499.26
-
15.65
2nd Storey
84.18
-
15.83
3rd Storey
184.71
-
16.01
4th storey
7.2
-
16.19
10 mm thick cement plaster 1:4(HSR15.52)(CP500%) 1st storey
1021.16
-
12.65
2rd storey
399.65
-
12.83
3rd storey
19.24
-
13.01
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1)(CP 230%)
364.37
-
4.6
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2)(CP 230%)
364.37
-
3.75
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3)(CP 230%)
872.03
-
9.4
Applying priming coat with metal primer on New steel or iron work including preparation of surface. (HSR 16.9)(CP 230%)
279.9
-
3.15
Distempering with washable oil bound distemper (of approved manufacture) two coats excluding priming coat on new work.(HSR 16.58)(CP 230%)
3762.55
-
9.1
Providing two coats of exterior acrylic emulsion paint (HSR 16.79) (CP 0%)
5716.94
-
48.75
Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand parper to get and even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. (HSR 16.81) 230%
9479.67
-
11.35
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- BOTH side electrical face (HSR 17.93(a) CP.165% -17.18 Note i) 25 mm thick
53.93
-
387.15
ii) 35 mm thick
97.86
-
436.15
Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete- (HSR 17.82 (C )) (CP 300%) I.S.I designation no. III (size of door 851 mm to 1000 mm)
27
-
216.5
Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded buildt up standard tubular sections/approciate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screw or with fixing cilps or with expansion hold fasteners including necessary filling up of gaps at junstions at top bottom asn sides with required neoperne felt etc. Aluminium sections shall be smooth rust free straighty mitered adn jointed mechaniucally snap beading for glazing panefing CP brass stainless steel sorwer all complete Fixed portion (Anodized aluminium transparent or dyed to required shade according to Is; 1868 minimum anodic coating of grade AC15) powder coating of 50 micron. (HSR 17.95 + note (i))(CP 15%)
116.87
-
257.3
providing and fixing aluminium work for doors , windows, ventilators and partitions with extruded built up standard tubular sections/apppropriate Z sections and other sections of approved make conforming to IS; 733 and IS 1285 fixed with rawlplugs and screws or with, fixing slips or with expansion hold fasteners inscluding necessary filliongup of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling C.P brass /stainless steel screws,etc complete. 50 micron powder coated (HSR 17.96+Note) with powder coating 50mm. CP.15%
914.78
-
268.7
Providing & fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforning to IS;12823 grade 1 type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p brass/stainless steel screws etc.complete. (HSR 17.97) CP.5% (b) Pre-Laminated particle board with decorative lamination on both sides.
1.52
-
780.3
P/F glazing in aluminium work for doors, windows, ventilator to IS 733 and IS 1285 complete in all respect. (HSR 17.98 b) CP.15% (a) with float glass panes of 4.00mm thickness
73.5
-
609
(b) with float glass panes of 5.00mm thickness
71.5
-
700
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.(HSR 18.12)(CP 500%) Cold twisted defrneed (Ribbed)
121.28
-
1040.35
Steel cold twisted defirmed (Ribbed) bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete.(HSR 18.22)(CP 500%)
854.54
-
927.05
S/F glass panes i/c special meta sash putty of approved make. HSR 18.30b CP.500% b)glass panes 4mm thick, exceeding 40 sq. dm areas.
73.55
-
115.4
Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:-as per HSR 18.34 (d) (C.P. @ 500%) a) 89X50X40mm wide single rebate.
332.93
-
71.55
b) door and window frame of size 76 mm X 68 mm with 35 mm wide single rebate.
211.5
-
58.6
C) door and window frame of size 127 mm X 50 mm with 40 mm wide double rebate.
695.7
-
76.8
TOTAL CIVIL HSR
-
-
-
P.H. (HSR-PART)
-
-
-
Excavation of trenches in streets, lanes or in Open areas for storm sewer, sewers running by Gravity nd manholes to full depths as shown In drawings including shoring timbering of Poling boards, frame System type, dressing to correct Sections and dimensions, according to templates and levels, Dewatering, provision for diversion of traffic, cutting trees and Bushes etc. Night signals, profiles, pegs, sight rails, oning rods,Crossing over trenches for access to the houses, watching fencing, Etc., fixing and maintenance of caution boards, refilling of trenches, Watering of refill, in 15 m layers, ramming and restoration of Unmetalled or unpaved surface to original condition and removal Of surplus soil from site of work, upto a lead of 1 Km in ordinary soil(HSR 6.10 a)(CP 370%)
22
-
1189
Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth.(HSR10.28)(C.P450%)
10.71
-
318.65
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth(HSR 10.41)(CP450%)
18.08
-
615.6
CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design. Size 450 mm x 450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 40 kg with C.C. topping ) (HSR 29.84) CP.450% 450x600mm inside Size 600×900mm inside
10
-
690
Providing salt glazed stoneware pipe grade in standard length of 600 mm each pipe marked with IS 651 and their lowering cutting jointing and testing as described in Hsr item no 29.38 29.39 29.40 i/c the cost of jointing material as well as carriage loading unloading stacking handling rehandling etc complete in all respect to the satisfaction of the EIC(HSR 29.95)(CP5%) b) 200mm
105.28
-
253
PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I BRACKETS for building into wall including Painting; 32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug; 15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jamnuts or couplings best design ( as approved by the Engineer- In-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC.HSR.30.41 (iv)CP.340% Size 550 mm x 400 mm with one tap
6
-
407
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.68) ( e)CP.340% Towel Ring
10
-
53.5
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. (HSR 30.70)(C.P. @ 340%). a) C.P BRASS i) Soap dish Large b) VITREOUS CHINA WARE White
13
-
59
i) Soap dish 160 mm
13
-
30
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.(HSR 30.71 a)(CP340%) 600 mm x 450 mm
9
-
107
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) (HSR 30.75)(CP 340%) a) Bib cock long body
17
-
116
c) Bib cock
18
-
100
Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge)HSR 30.76a CP340% 15 MM STOP COCK Stop cock male and female end
19
-
101
concealed stop cock with flange
10
-
130
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS.HSR.30.93, CP.300% 15 mm alkahene pipe inlet connection
14
-
10.5
CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION (HSR 30.95(C ))(CP 340%) (d)Size 75 mm x 50 mm (Labour Rate)
881.36
-
4
PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN, minimum depth of water should be 150 mm with a minimum seal 50 mm. (HSR 30.114)(CP 340%) a) 100 mm internal diameter S.W. gully trap
6
-
166
Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Enginer in charge.(HSR 30.119)(CP0%) 1000 Ltr
3
-
5263
500 Ltrs
2
-
2682
TOTAL P.H HSR
-
-
-
E.I. HSR
-
-
-
Supply and Erection of miniature circuit breaker/isolator 240/415 Volts in existing distribution board i/c making necessary connections, as per HSR 31.17 (C.P.@ 30%) (A) Miniature circuit breakers of 9 KA breaking capacity. ii) SPMCB 6 Amp to 32 amp
98
-
95
ii) SPMCB 40 to 63Amp
1
-
113
iii) SPN MCB 40 to 63 Amp
3
-
240
iii) TP MCB 40 to 63 Amp
2
-
377
iii) TPNMCB 40 to 63 Amp
2
-
499
Supply and Erection OF FITTING AND ACCESSORIES as per HSR 31.18 (C.P.@ 200%) xi) Bakilite angle/straight button holder large size.
25
-
6.2
xxvi) S/E of hexagonal MS box 1.6mm thick, 8cm,7.5cm deep top covered with MS lid by means of screws i/c 10mm dia. 30cm long MS rod made into suitable suspension hook & with 3mm thick backlite sheet erected in RCC slab complete.
51
-
26.3
PIPE LAYING, as per HSR 31.21(C.P.@ 350 %) XXX) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. b) PVC pipe 80 mm dia.
60
-
42
EARTHING, as per HSR 31.22 (C.P.@ 350 %) i) Earthing with GI earth pipe 4.5mtr. long and 40mm dia with masonry enclosure on the top etc. as required.
4
-
378
ii) Extra for using salt & charcoal/coke for pipe earth electrode as required.
4
-
125
iii)Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.
8
-
453
iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired.
4
-
1149
v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
12
-
186
xv)Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.
152
-
20.3
xiv) Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.
50
-
117
(xix) S/E of GI tape 20mm x 3mm thick on surface or recess for connection etc as required with all labour and material.
30
-
14.1
xvi) Providing and fixing 4.00 mm dia G.I wire on surface or in recess for loop earthing as required.
72
-
3.4
Supply and Erectionof under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches as per HSR 31.26 (C.P.@ 140 %) (Xi) 16 sq mm 4 Core cable ( Armd)
750
-
46.8
xxv) 25 sq mm, 3 ½ Core cable (Armd)
120
-
49.9
xxvi) 35 sq mm, 3 ½ Core cable (Armd)
150
-
60.2
(xxix) 70 Sqmm 3.5 core Ar Al Cable (Armd)
250
-
100.3
xxxxi) 25Sq.mm, 4 core armoured cable.
55
-
56.3
S/E suitable compression type brass cable gland for under ground cable. (HSR 31.28) (CP 140%) iI) 10 to 16 Sqmm 2 to 4 core Cable.
2
-
6.7
iii) 25 Sqmm to 50 Sqmm 2 to 4 core.
8
-
16.8
iv) 70 Sq mm to 95 Sq mm cable 3 to 3 ½ Core
2
-
22.5
MISCELLANEOUS: , as per HSR 31.35 (C.P.@130 %) ix)S/E of al. lugs heavy duty i/c crimping etc. upto the entire satisfaction of the Engineer-in-Charge of the works. (b) 10 Sq mm
4
-
1.1
(d) 16 Sq mm
150
-
1.6
e) 25 Sqm
26
-
1.8
f) 35 Sqm
20
-
2.6
(h) 70 Sq mm
12
-
5.1
Supply & Erection PVC unsheathed Copper conductor cable single core 1100 Volts grade in pipe of suitable size( excluding cost and erection of pipe), as per HSR 31.40 (C.P.@10%) (i) Size 1.50 Sqmm
3000
-
10.2
(iii) Size 4.00 Sqmm
1200
-
24.5
v) Size 10.00 Sqmm
120
-
50
SHEET STEEL ENCLOSURE: Supply & erection of sheet steel enclosure Double door distribution boards suitable for MCBs etc. recessed in wall with rag bolts i/c bonding to earth& necessary connections, as per HSR 31.41 (C.P.@ 10%) i) SP&N 4 way (Horizontal)
2
-
650
iii) SP&N 12 way (Horizontal)
1
-
1110
ix) 4-way, TP&N ( Verticle)
1
-
3850
x) 8-way , TP&N ( Verticle)
1
-
4890
P/F Modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. HSR 31.56(C.P.@ 0 %) 10 amp 1 way switch
10
-
87
10 amp socket
10
-
106
20 amp 1 way switch
5
-
116
16 amp socket
5
-
165
Call bell Ding-Dong
1
-
99
fan regulator
51
-
397
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate i/c concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required to complete the job in all respect as per HSR 31.57(C.P@0%) 1&2 module
22
-
101
Supply, installation,testing and commissioning of wall / free standing floor mounting dust and vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment / switch wear.Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3mm thick for separately cable alloey to BBC from switch chamber extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring ( copper) and fuse protection (Only outer area on all sides shall be measured) as per HSR 31.63 (C.P @ 0%)
8
-
2160
Supplying and fixing of copper bus bar duly tinned by means of SMC/ DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect as per HSR 31.64 (C.P @ 0%)
25
-
525
Pdg. and fixing digital metering equipment for LT cubical Panel consisting of 96mmx96mm 0-500V, volt meter with selector switch, Amp. meter (of required ratio up to 600/5 amp.) with selector switch and required C.Ts 3 Nos., a set of 3 no phase indicating lamps RYB LED. HSR 31.65 (C.P @ 0%)
1
-
4050
Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect..HSR 31.66 (C.P @ 0%) i) Rotary handle up to 125A, MCCB
1
-
675
Supply and erection of moulded case circuit breaker single pole/four pole on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.69) (CP 0%) iv) Four Pole MCCB 6 to 63 Amp
8
-
5152.5
v) Four Pole MCCB 100 Amp
4
-
5347
vii) Four Pole MCCB 200 Amp
1
-
10500
S/E of heavy duty 4 pole ON LOAD Change load over breaker switch suitable for operation of 415 volt AC supply complete with handle assembling having door interlock and interlocking arrangement on existing panel i/c making necessary connections with petty material required to complete the job. HSR 31.74 (C.P @ 0%) iii) 100 amp 4 pole ON LOAD changeover switch
1
-
5700
Supply and laying muticore telephone cable condoctor 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/ channel and making necessary connection complete in all respect and upto the entire satisfaction of the Engineer- in - Charge of the work. HSR 31.78 (C.P @ 0%) i) 2 Pair telephone wire
450
-
7.94
ii) 5 Pair telephone wire
200
-
19
S/E/T/C of CAT 6 cable in existing PVC conduit/PVC Channel complete in all respect with all labour and material required to complete th job in all respect( HSR - 31.80 ) ( CP-0% )
450
-
28.5
Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed with in a lead of 30 metres(HSR 6.6) (CP 425%)
27.96
-
1108.1
Cement concrete 1 : 6 : 12 with brick ballast 40 mm Nominal size in foundation and plinth. (HSR 10.30 + CP 450%)
5.45
-
329.95
Cement concrete 1: 1.5 : 3 with stone aggregate 20 mm nominal size in foundation and plinth.(HSR 10.42) (CP 450%)
12.13
-
702.5
First class brick work laid in cement sand mortar 1:4 in foundation and plinth. (HSR 11.4) (CP 600%)
16.9
-
424.6
12mm thick cement plaster 1:4 (HSR 15.5) (CP 500%)
71.33
-
12.7
Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete.(HSR 16.24) (CP 230%)
71.33
-
11.15
Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces.( Ist quality) (HSR 16.25) (CP 230%)
71.33
-
4.15
Providing 2 coats of exterior acrylic emulsion paint (HSR 16.79) ( CP 0%) b) Ist quality
639
-
48.75
Steel work fixed independentlty w/o connecting plates i/c cutting, hoisting and fixing in position . (HSR 18.1) (CP 500%) c) Tee's, angles & channels
9.44
-
964.1
Supply, hoisting and placing in position tubular trusses i/c runners, purlins, consisting of steel tubes confirming to IS. specification of tested quality duly welded with fillet welds 6 mm thick throughout i/c wind bracing. Open end of pipe sealed with 3 mm thick plate i/c the cost of nuts & bolts, where bolts connections are specified at flange joints i/c one coat of ready mixed red oxide zink cromate primer of approved quality, assembling and fixed in position complete in all respect. (HSR 18.14) (CP 500%)
7.74
-
1283.15
P/F hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled section with 3 mm thick flat iron cover molding of 12.5 mm width fixed with machine screws welded complete in all respect. (HSR 18.33) (CP 500%)
49.9
-
104.1
Centring and shuttering for flat surfaces such as suspended floors, Roofs, landings, chhajjas, shelves etc. inclination not exceeding 25 degree with horizontal Note-:In case the inclination of the R.C.C. slab is more than 25 degree, the Labour as well as through rate of item no. 9.1 shall be increased by 10 percent and nothing extra shall be paid for lesser inclination.(HSR 9.1) (CP400%)
12.08
-
40.65
Centring and shuttering for columns (square or rectangular or Polygonal in plan) (HSR 9.9) (CP400%)
17.84
-
49.45
Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects. (a) extra over item No. 10.79 to 10.94 if 1:1.5:3 mix is used, instead of 1:2:4 ((CP(HSR10.82 +10.95 ) (CP 450%)
5.46
-
1084.8
Cement concrete 1:2:4 with stone arrregate 20mm nominal size for reinforced concrete work for walls exceeding 20cm thickness ( stsight and curved) beams, girders,stairs,columns,(squreor rectangular) battens and lintels etc. excluding steel reinforcement but including centring and shuttering laid in position complete in all respect (a) extra over item No. 10.79 to 10.94if1:1.5:3 mix is used, instead of 1:2:4 ((CP(HSR10.86 +10.95 ) (CP 450%)
2.03
-
1188.75
Fe-500 EQRTMT steel bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete.( HSR 18.22) ( C.P 500% )
10.08
-
927.05
Providing and Fixing CAST IRON DOUBLE FLANGED SWING CHECK TYPE REFLUX(NON-RETURN) VALVES PN-1.6 MARKED WITH IS:5312 including nuts and bolts marked with IS:1363, Rubber sheet marked with IS:638 etc. carriage loading, unloading,stacking handling , RE-handling etc. Complete in all respects to the satisfaction of Engineer-in-charge.(Makes AARKO, VENUS, LEADER, BIR, JA, UPADHAY)HSR(28.10(A)(CP10%) i) 100MM i/d
2
-
3362
TOTAL E.I. (HSR)
-
-
-
DSR Civil
-
-
-
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as
per the architectural drawings with 18 mm thick stone slab over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment of
matching shade including rubbing , curing and polishing etc. all complete as
specified and as directed by the Engineer-in-ChargePolished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. DSR 8.13.1
25.81
-
2937.7
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868), transparent or dyed to
required colour or shade, with nuts and screws etc. complete :250x16 mm DSR 9.96.2
51
-
189.2
300x16 mm DSR 9.96.1
4
-
212.45
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating
not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required
colour or shade, with necessary screws etc. complete : DSR9.97 200x10 mm DSR9.97.3
67
-
76.15
150x10 mm DSR9.97.4
283
-
64.3
100x10 mm DSR9.97.5
132
-
49.2
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating
not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour or shade, with necessary screws etc. complete DSR 9.100 125 mm DSR 9.100.1
176
-
51.1
100 mm DSR 9.100.2
210
-
45.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour and shade, with necessary screws etc. complete.DSR 9.101.2 Twin rubber stopper
84
-
38
Providing and applying (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and
locations, finished in smooth line and level etc. complete. DSR 2016/13.78
2322.48
-
217.35
Providing and fixing stainless Steel (grade 304) rainling made of hollow tube chanles plates etc. including welding granding buffing poluctions and making curvatura (Where ever required) and fliing the same with necessary stainless steel nuts boltas complete including fixing the raling with nessary accessnaress and stainless steel door fasteners floor or the side of waist slab with suitable arragement as per approval of engineer in charge (Far payment purpose only weight of stainless steel mumbers shell be considered excluding fixing accessress such as nuts bolats fasteners etc) DSR 2016 /13.28
504.9
-
472.4
Providing and fixing concertina coil fencing with punched tape concertina coil 600
mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6
metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4
m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied
with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I.
barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge,
with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile
strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre
(cost of M.S. angle, C.C. blocks shall be paid separately)DSR2016 16.53
614.17
-
255
turfing of lawn with planting of selection no. 1 superior quality grass with machinery including ploughing the land leveling and dressing applying farm yard manure in 2.5 cm layer application of insecticide/pesticide to safe guard against soil borne disease CSR 32.21 CP 15%
3335.11
-
48.94
Total DSR Civil
-
-
-
DSR PH
-
-
-
Providing and fixing water closet squatting pan(Indian type W.C. pan) wih 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe with all fitting and fixtures complete, including flush pipe with manually controlled device (Handle lever) conforming to IS :7231 with all fittings and fixtures complete including cutting and making goods the walls Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests DSR17.10.1.3
5
-
3494
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:
13983 with C.I. brackets and stainless steel plug 40 mm, including painting of
fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 200 mm Kitchen sink with drain board
DSR 17.10.1.3
2
-
3772.35
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia DSR 17.28.1.1
12
-
75.6
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.DSR 17.78
6
-
9685.7
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall DSR 18.7 25mm dia of pipeline
98.87
-
216.2
32mm dia of pipeline
340.22
-
289.05
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. DSR 18.8 15mm dia of pipeline
19.93
-
246.2
20mm dia of pipeline
69.57
-
284.85
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) DSR 18.17.1 i)20mm i/d pipe
5
-
396.55
ii)25mm i/d pipe
5
-
428.2
iii)32mm i/d pipe
7
-
500.75
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 i)15mm i/d pipe
5
-
147.75
ii)20mm i/d pipe
5
-
170.95
iii) 25mm
15
-
205.8
iv) 32mm dia pipe
13
-
240.65
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.15 mm nominal bore, weighing not less than 32 gmsDSR 18.75.1
54
-
28.85
Total DSR PH
-
-
-
DSR Items EI Part
-
-
-
Supplying and fixing following Modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.( DSR - 1.24 ) (C.P. @ 0%) 1.24.6 ) Telephone socket outlet
9
-
119
1.24.7) TV antena socket outlet
1
-
119
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm soild copper conductorPE insulated, shieeeeelded with fine tinned copper braid and protected with PVC sheath in the existing surfca/recessed steel/PVC conduit as required.( DSR - 1.19 ) ( CP - 0% )
50
-
33
DSR EI Part
-
-
-
DSR Fire Fighting Part (16.11)
-
-
-
Supplying , fixing , testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. i) 100 mm dia (DSR item no. 16.11.1.4)
3
-
4120
FIRE DETECTION AND ALARM SYSTEM(CONVENTIONAL) DSR ( 17.1) S/I/T/C of main control and indicating panel made of 16 SWG MS sheet to accommodate the following items duly powder coated in approved color with louvers for ventilation , locking arrangement , audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone panel for fire alarm system. 250 Watt amplifier racks suitable for operation on 230 V AC/24V DC supply conforming to IEC -268-3 complete with all accessories as required -2 nos( one to act as standby) Talk back master station with LED PTT ( Press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/ communication suitable for 20 Nos talk back unit-1 set. Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc.complete as required-1 set. Amplifier change over switch for inter changing amplifier -1 no. Monitor panel for loudspeaker complete with output selector , ON/OFF switch fuse , visual indications etc complete as required -1 no. Gooseneck microphone with stand and ON/OFF switch -1 no Main ON/OFF switch , fuse indication lamps, DC & AC voltmeters & ammeters , terminal blocks etc. complete as required-1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos 12 Volt , 60 AH each sealed maintenaance free batteries-1 setMake: Honeywell/ Agni/Edwards.(DSR 17.1.10)
1
-
69084
supply, installation,testing & Commisioning of manual call boxes of M.S.Construvtionall point in surface/ Recess with stainless steel chain & hammer assembely complete with glass & push button etc. as required. (Make : Cooper / Hochiki / National / Safeway) ( DSR 17.1.3)
2
-
462
supply, installation,testing & Commisioning fire alarm sounder with facility to make annoucement , mounted in ABS Box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.(Make : Cooper / Hochiki / National / Safeway) ( DSR 17.1.7)
2
-
478
S/laying of 2x1.5 sqmm fire alarm armoured cable , 600/1000 v rated with annealed copper conductor having XLPE insulation , steel wire armouring & FRLS outer sheath complete as required.( DSR 17.5.2)
350
-
141
Supply,Installation, Testing and Commissioning of smoke detector with built in LED and Mounting Base Complete with all Connections etc. Make: Honeywell/ Agni/Edwards ( DSR 17.1.2)
4
-
1141
Supply and Fixing of 25 mm dia MS flexible pipe with PVC coating along with all ancillaries & accessories like Coupler etc. As required . ( DSR 17.5.4)
100
-
50
Providing and Placing on Terrace ( at all floor levels) polyethlene water storage tank ,IS:12701 marked , with cover and suitable locking arrangement and Making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support tank. Circular/ Rectangular Tank ( DSR18.48)
10000
-
7.25
TOTAL DSR Fire Fighting
-
-
-
NS CIVIL
-
-
-
P/F 25 mm thick finished red sand stone both side slightly rounded for partition and shleves in C B (NS)
43.19
-
754
Applying priming coat with exterior primer before provided weather shield exterior paint on outer walls on plastered / brick surface . (NS)
5716.94
-
25.7
Extra for granite polish on kota stone flooring (NS)
430.73
-
60
Earth filling with earth brought from out side including rolling watering ramming and compaction complete in all respect for irrespective lead and lift complete and fully atisfication of Engineer in - charge (NS)
4598.15
-
176
Providing and fixing mumty door consisting of mild steel angle iron frame 35x25x5mm thick cross brass 20x5mm @ 4nos at each side ) and two nos M S flats 50x6mm and covered with M S sheet 16 guage including locking arrangement ( with sliding bolt and T bolt) (NS)
125.9
-
74.35
Making chases in brick work for providing skirting flush with plaster NS
1182.54
-
26.45
Providing & fixing stainless steel wire mesh jali of 22 gauge and 316 grade in aluminium doors & windows IN ALUMINIUM sections including pvc/ neoprone gasket and labour for fixing etc. (excluding the cost of beadings, channels etc same will be paid in Aluminium work,) complete in all respect.N.S
80.03
-
800
Providing and fixing aluminium I-HOOK
61
-
30
P/F powder coated aluminium fitting of classic make complete in all respect.NS. (i)Sliding bolt 150x12 mm
39
-
120
Extra for moulding of granite stone etc. with machine polishing & edge complete in all respect as per NS.
33.3
-
85
Finishing of the laid cement concrete with vaccum dewatering system, surface vibrator and fine trowel complete in all respect. (NS)
653
-
61.75
Cutting groove in cement concrete work in road/taxi track of size 50mm deep. NS.
440.43
-
28
P/F SS 20mm dia hanging rod heavy quality i/c SS wall to wall clamps complete fixing in postion. (NS)
23.8
-
272
Providing and planting different type of plant i/c digging, planting, watering, manour, fertilizing etc complete in all respect. (NS) Hedge
300
-
8.15
Boganvila
30
-
23.44
Ashoka (7' to 8' high)
50
-
250
Erociria
46
-
180.76
Ficus Panda
6
-
180.76
Emli
5
-
180.76
making corbellng in RCC 1:1.5:3 i.e. shuttering Complete in all respect
304.32
-
266.3
Extra for labour for plaster on corbelling on parapit of building in any design & any height complete in all respect
304.32
-
127.2
Supply & Erection of of hi-rib profilrd sheeting 1000-1020 mm cover width 28.30 mm creast 200-150 mm centre to centre manufactured from 0.50 mm TCT Hi-Tensile bars galvalum sheet (AZ-150 gm aluminium zink alloy metallic coating sheet) complete with all labour and petty material required to complete the job i/c carriage, loading, unloading, westage, fixing on existing MS structure with STSC screws, nuts, bolts & washers etc.as required upto entire staisfactrion of Engineer-In-Charge of work.
25.84
-
698.8
Providing & Fixing chicken mesh jali i.e. nails & washers NS
506.46
-
42
TOTAL NS CIVIL
-
-
-
NS P.H.
-
-
-
Pdg. and fixing in position G. I. hooks for GI pipes complete. (NS)
113
-
10
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE C.P BRASS WALL MIXER (Jaquar Make Cat No. SQT-520) 15 MM (NS)
3
-
2323
Providing and Fixing of Pillar Cock Jaquar make Cat No. SQT-507 Complete in all respect. (NS)
6
-
690
Providing and Fixing of Over Head Shower Jaquar make Cat No. EOS-542 N Complete in all respect. (NS)
3
-
500
Providing and Fixing of Shower Arm Jaquar make Cat No. ALE-536 A Complete in all respect. (NS)
3
-
370
Providing and Fixing of Metropole Flush Valve Jaquar make Cat No. FLV-1093 Complete in all respect. (DNIT-NS)
3
-
3237
Providing and Fixing of Under Counter Basin Round Jaquar make Cat No. WB-02 Complete in all respect. (NS)
3
-
1440
Providing and fixing UPVC pipe class B complete with rubber ring and solvent (Supreme /prince)make complete in all respect a)110mm
97.03
-
315.95
b)90mm
57.38
-
261.3
Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe in side building N.S. a) 110mm i) Cowel
6
-
29.25
ii) PVC clamp
65
-
28.8
iii) Plain Bend/doorbend
21
-
151
iv) P -Trap
7
-
269
v) Socket
8
-
87
vi) Single junction with door
7
-
238
b) 90mm i) Cowel
6
-
25.4
ii) PVC clamp
16
-
17.65
iii) Plain Bend/doorbend
12
-
90.95
iv)Floor Trap
26
-
203
v) Socket
6
-
72.9
vi) Single junction with door
10
-
141.15
Providing and fixing CP jali with frame heavy quality complete in all respect. (NS)
26
-
200
Providing and Fixing of Waste Coupling Jaquar make Cat No. ALE-544 HT Complete in all respect. (NS)
11
-
344
constructio of onre no tube well with revese rotary boring hole 16" dia PVC pipe 7" dia of apollo make &delivery pipe jindal make 2" dia GI & KSB submersible moter pump 7.5 HP & panel board of 10 HP Bentek make i/c all necessary fitting
1
-
189876
TOTAL NS P.H
-
-
-
E.I. (N.S.) PART
-
-
-
Wiring in 1.5 sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & outer face plates complete (recessed type). (i) Fan Point with 10 amp one way switch :- b) Medium Point
30
-
500
(c) Long point
21
-
698
(ii) Light Point with 10 amp one way switch :- a) Short Point
27
-
305
b) Medium Point
39
-
473
c) Long Point
88
-
671
(iii) Twin Control Light Point with 2 way 10 amp switch:- (c) Long
8
-
782
(iv) Call Bell Point with bell push :- c) Long Point
1
-
686
(v) 5 Pin light plug point with 10 A switch & 10 A socket (wiring with 3 nos. copper wires of 1.50 Sqmm including earth wire for 3rd pin) a) Short Point
61
-
463
b) Medium point
11
-
665
(c) Long point
24
-
902
(vi) 5 Pin power plug point with 20 A switch & 16 A socket (wiring with 3 nos. copper wires of 4.00 Sqmm including earth wire for 3rd pin) (c) Long point
29
-
1420
S/E PVC pipe ISI Marked heavy guage i/c bend inspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect . i) 25mm dia on recessed
700
-
45
ii) 25mm dia on surface
60
-
39
iii) 32 mm dia recessed
20
-
53
iii) 32 mm dia Surface
20
-
48
S/E of LED 10 watt rectangular bulk head fitting with opal diffuser & 10 watt LED i/c erection of fitting in wall/Ceiling & making necessary connection to complete the job with all labour and petty material as required(Make:- Havells / Model- Endura Rugby or equiavalent model of other approved brands).
6
-
355
S/Eof fresh air fans (Exhaust fan) 200mm sweep PVC body with louver shutter, suitable for single phase A.C. 230 Volts, 50 HZ supply complete with all labour and petty material required to complete the job. (Havell's-Make & Model-Ventlair DX / Crompton Greaves-Make & Model-Brisk Air)
8
-
1388
S/Eof fresh air fans (Exhaust fan) 250mm sweep PVC body with louver shutter, suitable for single phase A.C. 230 Volts, 50 HZ supply complete with all labour and petty material required to complete the job. (Havell's-Make & Model-Ventlair DX / Crompton Greaves-Make & Model-Brisk Air)
2
-
1490
S/E of ISI marked propeller type ventilation fans (Exhaust fan) Size 300 mm, 1400 rpm Heavy Duty suitable for single phase A.C. 230 Volts, 50 HZ supply, A.C capacitor run conferming to IS:23/2/67 , complete with mounting ring with four no.s fixing holes without regulator as per rate contract specifications.with all labour and petty material required.( Havell's - Make & Model -Torboforce or Cormpton Greaves).
1
-
2914
Supply and erection of 300 mm aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National make)
1
-
365
Supply and erection of cable Management System of M.K./ Legrand make with accessories complete in all respect (White colour) :- PVC Commercial dado trunking of size 100 mm x 50 mm
50
-
721
PVC Cable divider 50 mm deep
50
-
78
PVC External Angle 90* of size 100mm x 50 mm
10
-
111
PVC End Cap of size 100mm x 50 mm
10
-
64
PVC Flat Tee of size 100mm x 50 mm
10
-
152
PVC Mounting Switch Boxes with plate 1 - 3 Module
15
-
96
PVC Mounting Switch Boxes with plate 4 - 5 Module
15
-
115
PVC Mounting Switch Boxes with plate 6 Module
5
-
180
CAT 6 RJ 45 Computer Jack
18
-
419
2 KVA online Interactive UPS ( Delta - Make ) system with 4 Nos 42 AH, 12 V ( Exide - Make ) Batteries for 30 Minutes Backup
1
-
41938
Supply and rection of vertical double door sheet enclosure distribution board (IP 43) suitable for MCCB as incomer recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. a) 4 way, TPN (Vertical, MCCB provision as incomer and provision for 12 Nos. 6-32 amp. MCB SP as outgoings)
2
-
6984
b) 8 way, TPN (Vertical, MCCB provision as incomer and provision for 24 Nos. 6-32 amp. MCB SP as outgoings)
2
-
8940
Supply and erection of surface/ Recessed mounting, energy efficient LED 6000 K round luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same in false ceiling with required material & making necessary connections etc :- i) LED 34/36/42W (2'x2') ( Havell's-Make & Model-LHEWEBP7PN1W036 Pluto Flat Panel or equivalent to other approved brands)
17
-
3327
ii) LED 18W Square app.(9''x9'') (Havell's - Make & Model - LHEBL JP7 IZ1W018 RITZ SQ or equivalent to other approved brands)
61
-
1864
S/E of surface mounting LED Batten fitting 1x 18 /20 watt, (4 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect. (Philips/ Havell's/ Crmpton/ Wipro make ) MODEL LL20-221-XXX-60HE OR EQUIVLENT
30
-
566
Supply and erection of surface mounting LED Batten fitting 1x 9/10 watt, (2 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect. Bajaj/Crompton Greaves/ Havell's/Philips/ WIPRO/HPL ) ( BAJAJ Model - BCLSB 10 W or Equivalent of other makes )
18
-
442
S/E of 45 watt LED 6K, die cast aluminium street light luminaire with IP-65 Protection complete in all respect.suitable for operation on 230 volts A.C supply ( Havell's - Model - LHETAXU7PN6J045 or equivalent model of Bajaj/Crompton Greaves/ WIPRO/Philips/HPL/GE)
19
-
4578
S/I/T/C of water cooler stainless steel body with 150 ltr /hr and 150 ltr storage capacity (USHA,Sidwal,Voltas Make) complete in all respect i/c all labour and petty material.
1
-
49185
S/I/T/C of high wall 1.5 TR capacity invertor type of 3 Star rating Split Air- conditioning unit ( Hitachi - Make & Model-RSD517HBEAW or equivallent make in O-GENERAL/DAKIN - Make) rated at 220 volts (+) (-) 10%,single phase, 50 cycle per second electric supply and consisting of condensing and indoor unit,control panel of the unit, LCD Cordless remote, internal control wiring, thermostats, all accessories , with hard 5 mtr. copper refrigerant & drain piping, 4 KVA three step wall mount voltage stablizer ( Microtek/ Live Guard Luminius / Logicstate / V-Guard/ Blue Bird Make) , MS stand and first charge of R-410 Gas & oil. The work should be completed in all respect including making repair of wall, floor and roof in original shape caused by making holes and chases et
2
-
50500
Supply, installation, testing and commissioning of refrigerant piping made of good quality copper tube with insulation & drain pipe of required dia for 1.5 TR/ 2 TR cap Split Air-conditioner recessed in wall complete with all labour and petty material required to complete the job.
20
-
800
S/E of 1400 VA Invertor ( Luminious / Microtek / Sukem make ) suitable for operation on single phase 230 volts, 50 HZ, AC supply with 2 nos 150 AH Exide batteries having warranty of 2 years i/c cost of trolly for batteries complete with all labour and petty material required i/c making necessary connections upto entire staisfaction of Engineer-in-Charge of the work.
2
-
30475
S/E PVC insulated 3 core, 1.50 sqmm copper conductor cable(unarmoured), 1100V, grade in existing pipe/pole, complete with all labour and petty material required i/c making necesary connections.
250
-
41
S/E of ceiling fan 1200 mm w/o regulator complete with blades, canopies, shackles down rod suitable for AC 230 V, 50 HZ supply i/c erection charges with petty materials required to comlete the job .( Havell's - Make & Model - ES-50, 5* rating/ Crompton Greaves - Make & Model as per brand list
51
-
1300
Supply and erection of 40 Watt 5700 K LED Post-Top Lantern luminaire Made in die-Cast Aluminium Spigot housing with decorative polycarbonate diffuser & IP-65 Protection fixed on existing pole. The work will be complete in all respect including making necessary connections, nuts & bolts and labour etc.
6
-
3162
SITC og EPABX system, complete in all respect consisting of following items:- i) EPABX machine equiped with4 trunks, & extensions and expendable type ( Make :- NEC,model-SL 1000)
1
-
23177
ii) Telephone set Model P-tel PT33
7
-
670
iii) Telephone set Model P-Tel PT55
1
-
1228
Supply & Erection of Commercial Mineral RO system of 40 Ltr/ hr. water Purification Capacity i/c fixing on wall with all petty material and labour reqd. (Make-Kent & Model-Elite-1 mineral RO-1052 equivallent make in)
2
-
38300
Supply & Erection of PVC Channel/Batten 40 X 60 mm i/c fixing on wall complete with all labour & petty material reqd. to complete the job.
10
-
243
S/E of PVC batten of size 25 mm x 16 mm double lock system,good quality fixed on roof /wall complete in all respect i/c petty material required to complete the job.
30
-
20
Supply installation,testing and commisioning of 2 MP, IP Camera with IR Image Sensor, 1/2.8” Progressive Scan CMOS, Lens 4mm @ F 2.0, Day Night IR cut filter with auto switch,Auto compression G.711/G.722.1/G.726/MP2L2, Image Resolution 1920x 1080,Network Storage Built in Micro SD/SDHC/SDXC slot, upto 128G, NAS (NFS,SMB/CIFS), Wifi range 50m, Power supply 12 V DC plus minus,10%, PoE, IP 67 complete in all respect including making necessary connections etc. ( Make – Hikvision or equivalent in CP Plus/Dahua )
8
-
6688
Supply, installation, testing and commisioning of 16 Channel NVR ( Make-Hikvision /CP Plus / Dahua ), with 2 SATA port & 2 USB Port Simultaneous live monitoring, recording, playback, backup and remote access, video recording Continuous, schedule, manual, alarm triggered; Protection of recordings upto 30days, backup External storage device via USB; PC or network drive via LAN,video out put HDMI, VGA (D-Sub),supply voltage 230 VAC i/c 2 Nos 4000GB (4 TB) Hard disc ( Western Digital - Make & Model-Survelliance Purpple) complete in all respect including making necessary connections & other petty material etc.
1
-
51897
Supply installation,testing and commisioning of Wall Mounted Racks 9U ( 550x 480x450)mm with two fans and 15and 5 amp power sockets and all required accessories ( NWR Make & Model-9U-5045 or equivalent in Data Rack /President ) & 1no. 16port L-3 managed POE giga byte Switchers (make-CISCO in D- LINK), 1no. 16port patch panel Loaded (make-D- LINK) & 1no. cable manager (make-D -LINK), 10nos patch cord of 1mtr. length complete in all respect including making necessary connections & other petty material etc.
2
-
38675
Supply and erection of VGA/HDMI Cable i/c connectors ( Falcon / Beldon - Make ) for NVR/Switcher/LED Monitor in existing PVC conduit pipe complete in all respect including making necessary connections etc.
10
-
442
Supply and erection of 43” LED TV (Samsung – Make & Model –43K5002 or equivalent model of Sony/Pansonic ) complete in all respect including making necessary connections etc but w/o cost of TV Cable & Set up box & dISC.
1
-
48372
S/E of 50/53/60 watt LED Flood Light pressure die cast housing with IP-65 Protection and efficient LED output for better distribution to be mount on existing building/ terrace complete in all respect.suitable for operation on 230 volts A.C supply( Crompton - Make & Model - LFLE50CDL or equivalent as per brand list of HPHC )
11
-
4575
Total EI NS
-
-
-
Estate Electrical NS Item
-
-
-
Supply, Installation, testing and commissioning of 40 KVA water cooled, silent diesel generating set complete with alternator rated at 3 phase, 415 volts, 0.8power factor, 50 cycle per second, 1500 RPM with AMF panel ( Outside the canopy) , Accoustic enclosure and battery charger etc. ( to be installed out door on existing plateform excluding cost of plateform) :-
1
-
600000
(A) Diesel Engine:-Engine multy cylinder, developing output BHP as per 40 KVA DG Set, at 1500 RPM, vertical totally enclosed water cooled, comprising compression ignition, electric start, 4 strok high speed diesel engine conforming to IS-4722, ISO – 3046, BS – 5514. The engine shall be complete with all standard and electrical accessories as per standard supply of manufactures. The engine shall be coupled with 3 phase 415 volts 50 cycle, 0.8 PF and 1500 RPM, alternator as per IS 4722/ BIS 2613 rated for 24 hours of continuous operation with 10 % over load capacity for one hour in every 12 hours in every 12 hours and comprising with:-
-
-
-
a) AMF panel of required size complete with all accessories as required.
-
-
-
b) On/Off start keys
-
-
-
c) Lube oil pressure guage
-
-
-
d) Fuel tank having capacity to run the D G Set min. 8 hours in first fill.
-
-
-
e) Residential silencer of required size and length i/c all necessary material as required.
-
-
-
f) 1 no. 12 volts, 130 AH, DC Mtc. Free batteries with leads and containers.
-
-
-
g) AVM pads fitted on base frame.
-
-
-
h) The base frame would be fabricated from suitable M.S. channel suitable machined to perfect alignment of the engine and alternator with rigid construction and necessary reinforncement to ensure minimum viberation
-
-
-
i) Any other accessories to make the generating set functional shall be installed as per manufactures specification
-
-
-
B) battery Charger :-Electronic battery charger shall be installed of required size and rating for charging of battery of D.G. set.
-
-
-
C) Acoustic Enclosure:-It shall be provided as per Technical specification as follows:-
-
-
-
1) Construction and Painting:-
-
-
-
i) The enclosure shall be fabricated out of 1.60 mm thick ( 16 SWG ) CIRCA sheet silent D.G.Set container shall be of modular construction with the provision to assemble and dismantle easily at site of work.
-
-
-
ii) The base frame shall be made of ISMC of suitable section)
-
-
-
iii) Durable industries system is to be provided on the doors and doors are fitted with high quality EPDM gasket to avoid leakage of sound .
-
-
-
iv) Weather proof anti corrosion treatment to be provided to the entire structure with powder coating.
-
-
-
v) Neutral / Body earthing points at the side of enclosure are to be provided.
-
-
-
vi) Emergency stop push button shall be provided outside the container.
-
-
-
vii) A tube fitting with tube rod for proper light inside canopy shall be provided.
-
-
-
2) Acoustic Insulation:-
-
-
-
i) Sound proofing of the enclosure shall be done with quality rock wood/ Mineral wood conforming to IS-8133-1933 of 25 mm thickness and density at 30 Kg / M compressed along with 3 mm thick vinyl sheet and non ferrous sheet.
-
-
-
ii) Exhaust pipe is to be thoroughly insulated by covering it with glass wool and further claded with aluminium sheet.
-
-
-
75 db A noise level as per latest central Pollution Control Board (CPCB)
-
-
-
Note:-Any other material required to complete the acoustic enclosure shall be installed as per manufactures specifications.
-
-
-
S/E of rubber mat of size 1 mtr x2mtr x 12 mm thick 11kv duty tested for 15 kv ISI marked (Heavy duty) complete in all respect including laying the same in position .
1
-
1859
S/E of danger plate written in 3 language enamelled paint of size 8"x6" of MS Plate of 16 guage sheet.
4
-
83
Supply & Erection of of hi-rib profilrd sheeting 1000-1020 mm cover width 28.30 mm creast 200-150 mm centre to centre manufactured from 0.50 mm TCT Hi-Tensile bars galvalum sheet (AZ-150 gm aluminium zink alloy metallic coating sheet) complete with all labour and petty material required to complete the job i/c carriage, loading, unloading, westage, fixing on existing MS structure with STSC screws, nuts, bolts & washers etc.as required upto entire staisfactrion of Engineer-In-Charge of work.
83.5
-
725
S/E of MS bucket stand suitable for 6 nos. fire buckets ( without buckets) made out of angle from of size 40mmx40mmx6mm i/c the cost of welding, labour and two coats of approved paint including one coat of red oxide.
1
-
1516
S/E of fire buckets of 9 liters capacity made out of 24 gauge GI sheet& duly painted with one coat of red oxide and two coat of approved paint in red colour written with fire as per fire protection complete with necessary sand filling in the bucket and labour etc.
6
-
241
S/E of 1.0 Mtr, 48 mm dia GI pipe bracket for fixing on the existing 7/8 mtr Hot Dip Galvanized octagonal pole complete with all labour and material required to complete the job in all respect upto the entire satisfaction Engineer in charge of the work. i) Single Arm
17
-
2150
i) Double Arm
1
-
2800
Total Estate Electrical NS
-
-
-
NS Items Fire Fighting
-
-
-
SUPPLY, INSTALLATION, TESTING. & COMMISSIONING OF: Make: Kirloskar/ Crompton Greaves Electrical Motor Driven Fire Pumping set suitable for automatic operation consisting of the following as per the specifications.
1
-
60000
a) Horizontally mounted, centrifugal type single/ multi stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 450 LPM against a total head of 30 M, pressure gauge with GM cocks on the delivery side including bypass arrangement (with 50 valve and upto 5M G.I. Medium pipes) for periodical testing of the working of the pumping set as per TAC rules
-
-
-
b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts +_ 15%, 3 phase, 50 HZ A.C. supply 1450 / 2900 RPM of suitable capacity (approx. 7.5 HP or as required) for the above pump coupled with flexible copuling including earthing as per relevant Indian Standard & specifications.
-
-
-
c) Common bed plate for mounting Pump and Motor fabricated of Motor fabricated of suitable M.S.Channel as per manufacturer*s recommendations.
-
-
-
d) Suitable Pump-Foundations as per manufacturer's design and 4 nos. Dunlop (cushy foot) heavy duty Antivibration mounting pads. ( for Hydrant down comer on terrace) starter, cable etc.
-
-
-
S/I/T/C of wall / free standing floor mounting dust and vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet with scopped roof & partitions with stiffners wherever required i/c powdered coated of approved shade with electrolyte grade hihg coductivity coppeer bus bar suitable for operation on 3 phase 4 wire, 415 volts, 50 HZ AC supply complete with all accessories for auto operation of 450 LPM pump e.g., single phase preventer, rotary switsh, ampere/voltmeter, starter of suitable capacity, pressure switch to start the pump at predetermined pressure necessary cable from panel to motor & 1 No FP MCCB 63 Amp., 25 KA, as incomer complete in all respect i/c all labour and petty material to complete the job upto entire staisfaction of E-I-C of work..
1
-
36000
P/F Black steel Pipes Heavy class IS 1239, including all fittings like, coupling, bends, elbows unions, tees, flanges reducers, offsets etc., making connections, all type of welded or screwed joints as per specifications and making connections required, including cutting holes and chases in brick or RCC walls and making good complete in respects of out side the ground. ( Make Surya, Jindal, TATA ) A) 100 mm dia
70
-
1500
B) 80 mm dia
10
-
1037
D) 25 mm dia
10
-
314
Painting MS pipes with two or more coats of synthetic enamel paint of first grade as per IS Specifications over one coat of red oxide zinc chromate primer including necessary surface preparation complete in all respects. A) 100 mm dia
70
-
40
B) 80 mm dia
10
-
32
D) 25 mm dia
10
-
10
Providing Pipe Protection for underground pipe from corrosion painticorrosive tape as per specification. B) 80/100 mm dia
10
-
90
Digging and back filling of trench for pipe line
10
-
160
Providing and fixing pressure gauge 100 mm dia with all accessories complete in all respects.( Feibig / Gluco / Prega / H Guru – Make )
1
-
1800
Providing and fixing pressure switch with accessories complete in all respects.( Switzer / Indfoss / V Tralag )
1
-
2400
Providing and fixing of 25 mm dia. Brass Air Release Valve 25 mm dia. Stop with brass stop cock, all accessories as required
1
-
1200
Providing, fixing, testing and commissioning ISI marked gunmetal fire hydrant valve 80 mm single outlet and fitted with 63 mm dia instantaneous female coupling at the outlet complete including companion flange gunmetal Blank cap and chain, nuts, bolts and 3mm thick compressed asbestor gasket at locations as per drawings confirming to IS 5290 Complete in all respects.( Minimax / Zenith / Newage / Vijay / Omex / G- Tech - Make).
2
-
4658
Providing and fixing gunmetal Two way fire brigade inlet with 63mm dia instantaneous type inlet and 150 mm dia flanged outlet with built in check valve for fire brigade connections to fire risers as per IS :904-1965 tested for 20kg/cm2 pressure complete in all respects with companion flanges, nuts, bolts, gaskets etc.
1
-
7600
Providing and fixing 1st Aid hose reel full swing with 20 mm dia 30 mtr long dia rubber lined dunlop pipe with shut of nozzle, of 6mm outlet. The hose reel shall conform to IS 884, 1969. Rate shall include 25mm dia pipe connection from riser to hose real including socket, nipples, elbows and 25mm dia globe valve complete in all respects. ( GETECH/ NEWAGE)
2
-
9176
Providing and fixing 63mm dia 15 mtr long reinforced rubber lined hosepipe conf. IS 636-1962, Part A with GM male and female coupling wire wound with GI wire complete in all respects( Make Newage/ Jayshree/CRC / Padmini / Jyoti /Tiger ).
4
-
4658
Providing & fixing fire authority approved M.S. hose box/ shaft door frame (size 900 (L) x 2100 (H) x 600 mm deep) made out of 16 SWG M.S. sheet Angle frame capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings & accessories. The box shall have a single or double glazed front glass door (with 4 mm thick glass) with lock & key arrangement & shall be painted with Fire red. (For Internal Hydran shaft.)
2
-
6600
Providing and fixing standard short size gunmetal branch pipe with gunmetal nozzle 15mm dia outlet with standard instantaneous type 63mm dia coupling. (ISI marked IS : 903).
4
-
2025
Providing and fixing fire extinguisher ISI marked complete in all respects. a) CO2 Type 4.5 kg ISI marked.(IS.15683)
3
-
6680
b) ABC Type 4 kg Capacity (multipurpose) ISI Marked (IS 15683)
2
-
2280
S/E of Powder Coted Finished galvanized steel Flush Fire doors of 2hrs Fire rating and tested in accordance with IS 3614 Part 2, & BS 476 Part 22: FRAME : - Door frames to be double rebate profile of 143 x 57 mm manufactured from 18 gauge galvanized steel, profile to have bending radius of 1.4 mm supplied in assembled form ready to install at site. SHUTTER : - Door Shutter in 46 mm thick manufactured from two 20 gauge galvanized steel sheets lock seam jointed at stile edges to form a double skin fully flush shell. Infill of Properitory insulation material to be provided for structural rigidity & additional reinforcements & sound Insulation complete with SS Ball bearing Hinges, Mortise dead lock, SS D-type Handles 300 x 22 mm long, Fire rated Door closer, 6mm thick fire rated wired vision panel of size 200 x 300 mm, Dash fastener with PVC cap i/c installation charges complete in all recpect with all labour and petty material required. MAKE: Pacific/Agni/Om Shakti/Kindle
4.2
-
8400
Total N.S Fire Fighing
-
-
-
LIFT NS
-
-
-
Supply, erection, testing and commissioning of 13 passengers (G+1) Electrical Traction Elevator Roomless , Gearless with With Speed of 1.0mtr/Second serving 2 Stops & 2 Opening with SS Vandal finish, hand rail, Front Mirror & Antiskid PVC Flooring to be erected in accordance with the following Technical Specification and as per latest IS Specification. vision panel minimize 550 mtr Height 150mtr wide in cach door with glass and greck
1
-
1737000
(i) Make of Lift :- OTIS / KONE / MITSUBISHI / SCHINDLER/ORBIS
-
-
-
ii) Type & capacity : Passanger Elevator App. 884 Kg. 13 person
-
-
-
iii) Speed mps : 1.0 mtr per second
-
-
-
iv) Travelling (max) in mtrs : Aprrox. 10 mtrs
-
-
-
v) Serving : (G+1) 2 stops, 2 opening all opening on same side)
-
-
-
vi) Power Supply : 415 V, 3 phase, 50 HZ A C supply.
-
-
-
vii) Control : simplex full collective control with or without atendant.
-
-
-
viii) Operation : Automatic
-
-
-
ix ) Motor : Permanent Magnet Synchronous ElectricTraction Gearless Motor to be hoisted on guide rail within the elevator hoistway .
-
-
-
x) Location of Motor : Motor to be hoisted above the rail within the elevator hoist way.
-
-
-
xi) Type of Drive : A. C . Variable Voltage Variable frequency with 16 Bit Microprocessor
-
-
-
xii) Car Size : min. 1100 mm x 2000 mm or as per manufacturer design.
-
-
-
xiii) Hoist way available : 1900 mm x 2600 mm
-
-
-
xiv) Car Enclosure : Bright Annealed Scratch Resistance Satainless Steel Panel.
-
-
-
xv) False Ceiling : Stainless steel false ceiling in hair line finish
-
-
-
xvi) Car Panel : stainless steel (scratch free) Hair line finish
-
-
-
xvii) Flooring : G ,1 ( Antiskid PVC Flooring )
-
-
-
xviii) Clear Opening of door : 900 mm wide x 2000 mm high
-
-
-
xix) Door Operation : Automatic DC/AC with adjustable Door Opening and closing timings with center opening sliding door
-
-
-
x) Door Frame : Stainless steel in hair line finish
-
-
-
Other Features:
-
-
-
i) Battery operated intercom,emergency alarm and emergency light with maintance free rechargeable battery.
-
-
-
ii) Adjustable guide shoes.(Ensures good ride comfort)
-
-
-
iii) Digital direcion & position indicator in Car & at all landings.
-
-
-
iv) Integral full height car opening panel with luminous combined with direction arrows, overload warning indicator and services cabinet
-
-
-
v) Hands free press and speak intercom with EPABX for three way communication.
-
-
-
vi) Automatic rescue device with Manual rescue Lever (to rescue the Passanger in case of emergency) the device will bring the elevators to the nearest floor and open the door automatically in Case of power / phase failure / low voltage.
-
-
-
vii) Full height infrared safety curtain( Highly sensitive safety device for safe entrance & exit of the Passanger into the Car & automatic floor announcer.
-
-
-
viii) Diffused lighting in car.
-
-
-
ix) Cross floow fans=2 Nos.
-
-
-
x) Looking mirror in side of lift car.
-
-
-
xi) Face plate Finish : stainless steel in hair line.
-
-
-
xii) Face plate : Rectangular.
-
-
-
xiii) A three feet high railing shall be provided on car top
-
-
-
xiv) The motor shall be high starting torque and low starting current and shall be arranged for self lubrication.
-
-
-
xv) Proper weight screen shall be provided at the hoist way.
-
-
-
xvi) Fire retardant compound coated traveling cable shall be used.
-
-
-
xvi) 2 Phase Device Fire Man Drive & Fireman switch at ground floor
-
-
-
xvii) Micro Movements L.E.D. based Buttons .
-
-
-
xviii) Load Weighing device with overload bypass feature.(Audio Visual over load indicator in the car)
-
-
-
xix) Steel items such as Door Frames Sill Angles, Fascia Plates, Spring Buffers.
-
-
-
xx) Braille fixtures, Lift announcement system, Pit ladder, Hand rail , Pressure sensing device & Additional Car Gate Lock .
-
-
-
xxi) Three Side Hand Rails in Stainless Steel Finish
-
-
-
xxii) System Capable of withstanding +10% to –10% Variation in Supply Voltage Fluctuations. ( C.V.T should be provided for Protection of lift against Single phase, Low voltage & over voltage)
-
-
-
xxiii) Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel
-
-
-
xxiv) Fire Rated Landing Doors for a Period of One Hour Only.
-
-
-
xxv) The whole machinery shall be mounted on appropriate anti vibration supports to minimize voice and vibration.
-
-
-
xxvi) A handrail not less than 0.60mtr long and 1.0 mtr. Above floor level shall be fixed adjacent to the control panel..
-
-
-
xxvii) The time of automattically closing door shall be minimum 5 seconds and the closing speed shall not exceed 0.25mtr./ Seconds
-
-
-
xxviii) Overspeed governor ( Electro-mechanical device that prevents free fall in case the lift is travelling at speed more than 10% of the rated speed in downward direction.
-
-
-
xxix) All other required features relates the operation of lift by the Handicapts & Blind person as per instruction of lift inspector.
-
-
-
Total Lift
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements