Northern Railway Tender

I/R for supply and fixing GRP/ SMC (sheet moulding compound) panel tanks ISI marks on each panel with certificate of ISI (IS 14399 of 1996). The tank shall be assembled by using GRP / SMC panel of 1m x 1m, 1x2m or 1x1.5m as per site requirement on Independent steel staging of 10 m height or as required which shall be paid separately.The panel should be stand hydrostatic pressure of at least 4 times the working load and should be provided with HDG nut,bolts/washer, rubber foam 3 gasket, cleats, including air vent PVC support of 110 mm dia for the roof top panel. The tank will be manufacture a s per manufacturers specification and meets all ISI standards. All MS parts inside/outside should be hot dip galvanized to avoid rust .The tank should have ladders inside and outside, provision of inlet/ outlet/overflow/drain etc. complete in all respects with all leads and lift to any distance as a complete job. The rate includes all lead, lifting at any height, loading, unloading, all taxes, charges, all labour and material, T & P as a complete job nothing extra will be paid whatsoever the case may be.

Supplying and fixing o f gangway with M.S. chequered plate 0.75 m having 7 mm thickness and length as approved by the site engineer. The cost include cutting to size drilling of 14 4 mm dia holes, supplying and fixing 14mm dia nuts and bolts with 5mm thick 50mm dia washer as per RDSO drawing number B-1636/1/R-2 o f approved design and specification a s per annexure A and welding with contractor T & P, L & M, lead, lift, loading, unloading, transporting, scaffolding taxes etc. complete. Including its galvanizing as directed by the engineer in charge. So nothing extra will be paid except the accepted rates. Whatsoever the case may be .

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer -in-charge,letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and 5 fixing the same to the plate of structural framework by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300mm centre to centre all along the periphery as well as in two vertical rows alongwith theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners,lowering down the structural frame work from the gantry, fixing and erecting thesame in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 16@ 46<46@ 1 Overhead informatory road signage