Northern Railway Tender

Fabricating & supplying and fixing of angle 75x75x8 for Gauge lie runner rod on steel channel/H-Beam sleepers bridges including fixing by drilling holes opening but and bolts and refixing same tools & plans, labour as complete job.

"Description: IR for complete rate for boxing ballast and ballast profiling after deep screening/unloading of ballast as directed by site Engineer asper standard ballast profile (IRPWM)including heaping of ballast in tamping zone keeping rail foot and sleeper top free from ballast, spacing and squaring of sleepers, gauging, cleaning of muck, proper fixing off as tening, attention of track during each round of tamping by TTM machine in relation to pre and post attention works as laid down in para226 of IRPWM. Payment shall be made only on ceir respective of nos of TTM packing rounds and after relaxation of normal speed and restoration of complete ballast profile. It includes removal of wooden blocks/joggle fishplates from track and refixing the same after machine working, removal of guard rail on bridge approaches temporarily and refixing the same. For turn-out portion the length along main line and lead curve shall be measured separately.

"Complete item rate for opening out, removing Deep screening of ballast up to cess level by using 25mm square mesh sieve inclined (unclination 60 degree to horizontal) putting of screened ballast into the track and providing 300mm clean ballast cushion below the bottom of sleepers, with initial aligning, boxing, grading , leveling of track to approved longitudinal and 32 transverse profile, gradinf, kutcha packing levelling of track and fittings wherever required(with non- infringing track jacks), cess cutting upto 1.0 metre form toe of ballast on both side to track. as per CE's circulats (issued form time to time) as per IRRPWM (corrected up to date) and leading, disposing of released muck/earth at nominated places with average lead of 100m. the rate is complete with contractors own labour, tools, plants etc. extra ballast required for railsing the cushion will llbe supplied by the railway. so nothing extra shall be paid to the contractor except the accepted rates, whatsoever the case may be. "