National Highways Authority Of India Tender

REMOVAL of unauthorized boards/hoardings & dead animals/birds Removing the dead animals/birds laying on the complete Highway length and burying them at proper safe locations outside ROW complete in all respect with all lead and lifts as per para 6.8 'Performance Standard' of scope of work of IRC SP 84 2019 and as per direction of the Engineer in charge. Removal of unauthorized boards/hoardings within ROW including gas cutting if required and stacking, transportation, depositing the said material with department, etc complete as directed by the Engineer- in- Charge.

Cleaning slab/box type culverts, Major & Minor Bridges and pipe culverts, lined/unlined drain including clearing, cleaning and reshaping of upstream and downstream faces of those culverts with in the ROW in the entire project length. The Job includes disposal of excess material recovered site including vegetation outside ROW with all leads and lifts complete in all respect as per direction of Engineer in charge and as per road maintenance Standard clause no.6.5 of IRC SP 95-2011.

Carrying out the proper cleaning, and removing of dust/silt/trash/ plastic/rubbish/ garbage/waste from the carriageway, (unit length for total width of carriageway LHS+RHS Including median width), foot paths, verges (Including the verges central median) by mechanical means and from shoulders up to toe line of the embankment including side slopes manually and disposing of the waste material at a suitable place outside ROW with vehicle tracking system with all leads and lifts complete in all respect and manually if required and as directed and approved in maintenance manual by the engineer incharge.

For cleaning of MCW (Both Sides)

For cleaning of SR (Both Sides)

Maintenance of median and the existing plants by basin making, weeding-hoeing, cleaning, watering, mixing good earth and manure, leveling and dressing of median, uprooting and removal of weeds, cutting grass, disposal of all muck within all leads and lifts outside ROW regularly to keep the median clean and plantation in healthy and good condition. The job also includes the cleaning and removal of spilled over earth from median to main carriageway in the portion adjacent to the kerbs all along the median complete in all respect and as per direction of engineer in charge and as per provision given in MORTH Specification and IRC specifications and as directed by Engineer-in-charge.

Restoration of Rain Cuts The work shall consist of earthwork as per procedure given in Clause 305 of MoRTH Specification for restoration of rain cuts in the embankment and shoulders using suitable material and compacting the said rain cut as per procedure given in Clause 3002 of MoRTH and directions of the Engineer-In-Charge.

Maintenance of Earthen Shoulder (filling with fresh soil) Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment as per technical clause 3003 of MORT&H specifications

Minor repair of damaged Single faced W-Beam metal crash barrier made out of members. Job includes repair of old damaged member and neatly refixing the old member in all respects including straightening of members, as directed by Engineer in charge including Fasteners and fixing etc complete in all aspect as per specification given in IRC 119-2015.

Retro Reflective Sheeting Tape of size 75x75 mm on the vertical posts of existing W beam crash barrier complete as per MoRTH specifications clause and technical clause IRC:55-2014. and direction of Engineer-in-charge within all leads and lifts as per approved drawings.

Maintenance of Solar Blinker with respect to any damages caused in pole, battery , any electric fixture, light or any other damages as per Tecchnical Specifications and as per directions of the Engineer In-Charge.

Operation & Maintenance of Highway Lighting Electric Poles including replacement/repair of Foundation, damaged pole, cable, MCB, bulbs / LED lights of suitable wattage as decided by IE or Authority, of required lux 40 (to be maintained throughout the Year 24x7) and all other electric fixture complete in all respect as per direction of Engineer in charge and as per road maintenance Standard given IRC SP 95-2011 and Technical Specifications conforming to MORTH specifications in complete aspect.

Painting on concrete surface of kerb and concrete crash barrier Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm complete as per drawings and Technical Specifications conforming to MORTH specifications clause no. 803 and as per directions of the Engineer In-Charge.

Cautionary sign board 900x900x900mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4mm thick aluminum Composite material (ACM) sheeting having aluminum skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminum alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .

Mandatory sign board 900mm circular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. Fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .

Informatory sign board 800x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .

Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and IRC 67 2012, fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground including foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in India condition conforming to clause 6.7 of IRC 67- 2012.

Total Estimated Cost

Bidder to quote single rate as tender premium % above or discount below the total estimated cost mentioned above.

I/We hereby agree to execute the above work on the tender premium or discount quoted here on the total estimated cost mentioned above. I/we understand that filling of both cells meant for premium or discount at a time will render my/our bid as non responsive.

Bid price in Rs.