National Highways Authority Of India Tender

Providing and laying bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder PMB-76 @ 5.4%, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per MORT&H specifications.

Road Marking with Thermoplastic Compound Road marking with hot applied thermoplastic ompound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications.

Moulded Shank Road Stud Supplying and fixing of single mould twin shank reflective road studs made out of polycarbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications.

Total

Dismantling Works

Milling on Bituminous Surface: Dismantling of existing damaged Bitumen surface by cold Milling Machine up to any depth and hauling the milled material up to any lead and stacking at nearest recycling Plant site.

Recovery for milled material:- Recovery shall be made for retrieved milled material at the rates specified herein ( i.e. @ 20% of rate quoted for item of BC). Note:- Material obtained from dismantling of existing BC and DBM layer has been calculated @ 60% of the retrieved material as per theoretical calculation. The agency shall take away this material at the fixed rate @ 20% of quoted rate of BC. If actual material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The dismantled material can be used in any of the items for the work after modification (bringing it to required specifications) so as to fulfil requirements of MoRTH specification clause 519 and after approval from the employer. In case it is not possible to use this material on the work the agency can take away this material. However, recovery of material shall be made for the quantity exhibited in the BOQ and at the rates specified herein irrespective of the fact that material is used in the work or not. Bidder/Agency may visit site before quoting rates and make his assessment for the extent of retrieved material.

Total

Total Estimated Cost

Bidder to quote single rate as tender premium % above or discount below the total estimated cost mentioned above.

I/We hereby agree to execute the above work on the tender premium or discount quoted here on the total estimated cost mentioned above. I/we understand that filling of both cells meant for premium or discount at a time will render my/our bid as non responsive.

Bid price in Rs.