National Highways Authority Of India Tender

Earthing and Lightening Arrestor Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. (but without charcoal or coke and salt) as required and as per approval and direction of Engineer in Charge. Complete in all respect.

Extra for using salt and charcoal / coke for pipe earth electrode as required and as per approval and direction of Engineer in Charge. Complete in all respect.

Supplying and Laying 25 mm x 3 mm GI Strip at 0.5 meter below ground as strip earth electrode including soldering etc. as required and as per approval and direction of Engineer in Charge. Complete in all respect.

Supplying and Laying 25 mm x 3 mm GI Strip in 40 mm dia GI Pipe as / from earth electrode including soldering etc. as required and as per approval and direction of Engineer in Charge. Complete in all respect.

Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required and as per approval and direction of Engineer in Charge. Complete in all respect.

Supply and erection of Hot Dip Galvanized octagonal pole of 3 mm thickness with base plate including cost of nut and bolts, earthing studs integral cable termination arrangement 5 mm thick bakelite base plate on suitable welded MS/GI bracket 32 amp 4 way connector 2 nos. 10 Amp SP MCB, end cover and all accessories as supplied by the manufacturer including providing RCC foundation of M25 grade (1 Cement: 1 Stone Aggregate: 2 Coarse sand) i/c exacavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respect and nas per direction of Engineer-in-Charge. Lux: (Required 40 uniform Lux throughout as per IRC and IS/BIS specifications as applicable) (10 metre long pole with top dia 100 mm and bottom dia 200 mm with base plate os size 350 x 350 x 20 mm & electric connection from concern department).

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2, laid 0.75 metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfactuion of the Engineer-inCharge of the work. DWC /HDPE pipe 63 mm of outer diameter/50 mm of inner diameter as per IS 16205,part 24 shall be supplied and erected.

Transformer: Design, Supply & erection of transformer of standard make Required 25 KVA 11/0.433 KVA rating outdoor type 11 KVA V.C.B, panel, G.O. switch, H. Pole , H.T metering panel, APFC panel, battery charges, 11 KVA substation, entire cable network from G.O. switch to H.T metering equipment and from H.T metering to Transformer. From transformer to main to L.T, panel earthling, safety equipment, fenced enclosure for transformer, and any other contingent thereto complete in all respect as per approved make and directions of Engineer-in-charge as per respective capacity of 25 KVA

Supply and erection of Hot Dip Galvanized octagonal pole of 3 mm thickness with base plate including cost of nut and bolts, earthing studs integral cable termination arrangement 5 mm thick bakelite base plate on suitable welded MS/GI bracket 32 amp 4 way connector 2 nos. 10 Amp SP MCB, end cover and all accessories as supplied by the manufacturer including providing RCC foundation of M25 grade (1 Cement: 1 Stone Aggregate: 2 Coarse sand) i/c exacavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respect and as per direction of Engineer-in-Charge. Lux: (Required 40 uniform Lux throughout as per IRC and IS/BIS specifications as applicable) (8 metre long pole with top dia 100 mm and bottom dia 200 mm with base plate os size 350 x 350 x 20 mm. & electric connection from concern department)

Supply & Erection of double Arm Bracket made of 40mm dia G l pipe B class lSl 1.25 mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top after fabrication the bracket shall be hot dip galvanized fixed with ornamental cap duly welded painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work.

Supply and Erection of LED Street Light Fitting of LED 40 lux with cast aluminium body & toughened glass including the cost of all accessories as supplied by the manufacturer including the cost of all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work.

Supply & Erection of 65 Amp. 3 Phase automatic / digital time switch of HSN code 8537 along with contactor of required capacity of movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickle cadium call for 150 hours in the event of power failure including cost of all petty items complete in all repsect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply & Erection of Underground cable loose in existing pipe or trenches complete in all respect upto up to the entire satisfaction of Engineer-in-Charge of the work.

16 Sqmm. 4 Core cable (Armoured)

25 Sqmm. 4 Core cable (Armoured)

Supply & Erection of Single Arm Bracket made of 40mm dia G l pipe B class lSl 1.25mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top after fabrication the bracket shall be hot dip galvanized fixed with ornamental cap duly welded and painted with 2 coats of alumininum paints on bracket including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work.

Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material at approved locations to control speed. The close graded premix surfacing material type B shall conform to technical clause 512 of MORT&H specifications

Total Estimated Cost

Bidder to quote single rate as tender premium % above or discount below the total estimated cost mentioned above.

I/We hereby agree to execute the above work on the tender premium or discount quoted here on the total estimated cost mentioned above. I/we understand that filling of both cells meant for premium or discount at a time will render my/our bid as non responsive.

Bid price in Rs.