Military Engineer Services Tender
... More
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_696830_2Bid Award Id
ViewTender No
GE/SRA/T-68/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for applying two coats of weather proof exterior emulsion paint, mixed in consistency as per manufacturer's instructions, added with suitable stainer to achieve the desired colour shade, and applied over plastered/concrete floorings, hardstanding, links etc, in camouflage pattern (as per users recommendations) using spray machine complete all as specified and directed by Engineer-in-Charge.
28200
-
-
... More
NOTES:- 1) Painting shall be done by using airless paint sprayer machine having adequare pressure.
2) The work lies inside technical area of Sirsa Air Force Station. Since, the station is an active flying station, there may be restrictions on working hours. Contractor shall keep in mind the above aspect while quoting his rates. No claim shall be entertained during currency of work.
3) Quoted rate shall be deemed to include for all T&P required for complete removal of layers of paint.
(4) Quoted rate shall be deemed to include for cost of cement paste or cement mortar to be required for filling in cracks, voids etc.
5) Contractor shall procure the paint & primer directly from manufacturer and submit purchase voucher accordingly. Procurement from dealers is not acceptable under the subject contract.
(6) Paint and primer shall be supplied in sealed containers and shall be kept in MES Store under custody of concerned JE (Civil). The contractor's supervisor shall be responsible for daily collection of container from the concerned JE (Civil).
-
-
-
... More
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.
575
-
-
... More
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on external surfaces of brick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
475
-
-
... More
Supply only Liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed.
5
-
-
... More
M&L for preparing new Plastered surfaces of external walls, upto 4 storey height and treating with one coat of suitable exterior cement primer complete all as specified and directed.
475
-
-
... More
M&L for applying two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over new plastered wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, upto 4 storey height complete all as specified and directed.
475
-
-
... More
M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed.
100
-
-
... More
M&L for preparing new rough cast plastered surfaces of external walls, upto 4 storey height and treating with one coat of suitable exterior cement primer complete all as specified and directed.
100
-
-
... More
M&L for applying two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over rough cast external plastered surfaces complete all as specified and as directed.
100
-
-
... More
SCHEDULE 'A' PART-II
(COMPRESENVE MAINTENANCE NORTHERN SIDE)
-
-
-
... More
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.
0.5
-
-
... More
M&L for Cement Concrete 1:4:8 type D2 (40mm Graded Stone Aggregate) 100mm thick in Sub-bases, complete all as specified and directed.
132.25
-
-
... More
M&L for Cement Concrete 1:2:4 tybe B1 (20mm Graded Stone Aggregate) 100mm thick as in flooring complete all as specified and directed.
1
-
-
... More
M&L for Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40mm thick as in paths/Hardstanding finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.
100
-
-
... More
M&L for Cement Concrete 1:3:6 type C2 (40mm Graded Stone Aggregate), 75mm thick in plinth protection finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.
100
-
-
... More
M&L for laying pre-polished 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; incl taking out existing old paver blocks and removing from site complete all as specified and directed.
(NOTE: Sand cushioning shall be measured and paid separately)
100
-
-
... More
M&L for sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed.
2.5
-
-
... More
M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
0.25
-
-
... More
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.
401.91
-
-
... More
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed.
Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
10
-
-
... More
Supply only Liquid Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
0.5
-
-
... More
M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed.
519.05
-
-
... More
M&L for preparation of newly plastered surfaces and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions, upto 4 storey height complete all as specified and directed.
10
-
-
... More
M&L preparing newly Rough Cast plastered surfaces of Walls and applying two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior Primer (as per Manufacturer's instructions), complete all as specified and directed.
519.05
-
-
... More
Demolition of Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. Incl removal of debsris from site complete all as specified and directed.
8.8
-
-
... More
M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and directed.
8.4
-
-
... More
M&L Brick work using Serviceable Bricks obtained from Item No. 15 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and directed.
0.4
-
-
... More
Dismantling of Asbestos cement (corrugated, semi-corrugated, plain, etc.) sheets in roof/wall coverings and removal from site complete all as specified and directed.
61.56
-
-
... More
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
51.56
-
-
... More
S&F pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
10
-
-
... More
Dismantling structural steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed.
2.63
-
-
... More
M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.
(NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
207.66
-
-
... More
M&L for preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and directed.
14.4
-
-
... More
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed.
0.5
-
-
... More
M&L for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
50
-
-
... More
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets incl removal from site complete all as specified and as as directed.
106.99
-
-
... More
S&F false ceiling with powder coated exposed G.I. grid suspension system consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle, wall angle fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c, Main Runners placed @ 1200mm, Cross Tee 1200mm inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm and additional cross tees of 600 mm placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm, grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit complete all as specified and directed. Note: Ceiling board will measured and paid seperately under appropriate item.
41.89
-
-
... More
S&F 12mm thick mineral fibre core ceiling board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed on GI Snap Grid Frame Work with Steel Screws, complete all as specified and directed.
41.89
-
-
... More
S&F 30mm Thick ACOUSTIC PERFORATED PRELAM PVC WALL PANELLING consisting of Prelam PVC Perforated panels having wall thickness of 5mm ( ±0.25 ) PVC sheet of Density 600 Kg/Cum Manufactured by an ISO-9001-2015 certified Company, and 25 mm thick Glasswool / Rockwool pasted with perforated sheet with suitable adhesive.The battons of 25mm thick and 50mm wide should have in their center a groove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC battons. The PVC battons shall be fixed to the wall using 75mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC battons of 5mm ( ± 0.5 ) thick PVC Sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the panels, using solvent cement. 900 heat bent strips of 5mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints / pillars etc. complete as per direction of Engr-in-charge, manufacturer’s specification & drawing.
(NOTE: Quoted rate shall be deemed to include for PVC battens, 25 mm thixk glasswool/rockwool and 5mm thick prelam perforated panels)
120
-
-
... More
S&F 6mm thick HPSC cement fibre plain building boards, fixed to wall, including finishing with 1.5 mm thick wall putty complete all as specified and directed.
5
-
-
... More
Dismantling Floor, Paver Tiles, Hearth or Wall Tiling, etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.
275.73
-
-
... More
M&L for providing Joint Free HD matt finish Ceramic tiles, coloured, joint free, 9-10 mm thick (Square/rectangular), area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
50
-
-
... More
-ditto- as per Item No 2.32 above but for matt finish ceramic tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate. Length and type of tiles in skirting shall be same as that of floor.
5
-
-
... More
M&L for Non-skid Glazed Ceramic Coloured/Printed floor Tiles 400x400x6.0 to 7.0mm thick in Flooring, set and jointed in Neat Cement Slurry and pointed in White/Coloured Cement, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
31.72
-
-
... More
M&L for Coloured Glazed Ceramic Tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles, laid over and including 10mm thick rendering as Screed or backing coat of wall tile in Cement Mortar 1:4, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
168.94
-
-
... More
M&L Vitrified Coloured Tiles 9 to 10mm thick (Square/ Rectangular), Double Charge, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
49.59
-
-
... More
M&L Vitrified Coloured Tiles 9 to 10mm thick (Square/ Rectangular), Double Charge, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, including goruting of joints complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. Grouting shall be measured and paid seperately.
118.8
-
-
... More
M&L for grouting joints of ceramic floor tiles, having 3mm joint width using epoxy grout mix of 0.70 Kg of organic coated filler of desired shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg) including filling/grouting and finishing complete all as specified and directed.
(NOTE: This item shall be executed only for Item No 37 here-in-before)
118.8
-
-
... More
M&L Vitrified Coloured Tiles 9 to 10mm thick (Square/ Rectangular) Double Charge, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
1
-
-
... More
M&L for providing outdoor ceramic Floor (Paver) Tiles, 400 x 400 x 9.0 to 10mm thick, highly abrasive, Anti-skid, Impact Resistant, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
(NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
180.29
-
-
... More
M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Machine cut Kota Stone Slab 20-25mm thick in Flooring, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
37.5
-
-
... More
M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Granite (of any type) Tiles, 18-20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed.
NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
3
-
-
... More
Demolition Cement Concrete (Reinforced) of slab, facia, chajjas, sunshade, chullah hoods and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed.
0.5
-
-
... More
M&L for RCC 1:2:4 (type B1) using 20mm graded aggregate as counter/platform supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
NOTE : MS reinforcement shall be measured and paid seperately.
0.5
-
-
... More
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.
5
-
-
... More
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
40
-
-
... More
S&F in repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and directed.
2
-
-
... More
S&F in repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and directed.
2
-
-
... More
S&F in repair Looking Mirror 5.0mm thick of size 600x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror complete all as specified and directed.
1
-
-
... More
S&F in repair Brass Chromium Plated Tubular Towel Rail 20mm dia, 60 Cm long with Brackets complete all as specified and directed.
5
-
-
... More
S&F in repair stainless steel Grating Round 100mm dia with waste hole jointing with Solvent Cement complete all as specified and directed.
2
-
-
... More
S&F in repair Chromium Plated health faucet with 1mtr stainless steel tube indcluding necessary fitting and fixtures complete all as specified and directed.
2
-
-
... More
S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and directed.
1
-
-
... More
S&F in repair brass chromium plated Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.
2
-
-
... More
S&F in repair Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed.
(NOTE: Quoted rate shall be deemed to include for the cost of waste coupling and waste pipe)
2
-
-
... More
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
2
-
-
... More
S&F in repairs Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces complete all as specified and directed.
5
-
-
... More
S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed.
7
-
-
... More
S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps,waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe (NOTE: Cost of CP wate coupling and PVC waste pipe is deemed to be included in the quoted rates)
3
-
-
... More
S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adapter Nuts of PVC, complete all as specified and directed.
2
-
-
... More
S&F in repair PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
1
-
-
... More
S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid on floor, complete all as specified and directed.
3
-
-
... More
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid on floors, complete all as specified and directed.
3
-
-
... More
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with PVC clips, complete all as specified and directed.
1
-
-
... More
S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls with PVC Clips, complete all as specified and directed.
5
-
-
... More
S&F in repair PVC (SWR) 75mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement , complete all as specified and directed.
2
-
-
... More
S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement , complete all as specified and directed.
2
-
-
... More
S&F in repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.
2
-
-
... More
S&F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.
2
-
-
... More
S&F in repair 75 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed.
2
-
-
... More
S&F in repairs 110 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed.
2
-
-
... More
S&F in repair PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.
2
-
-
... More
Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and directed.
9.65
-
-
... More
-ditto- but for 20 mm bore, medium grade GI pipes
10
-
-
... More
Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and directed.
5.65
-
-
... More
-ditto- but for 20 mm bore, medium grade GI pipes
8
-
-
... More
Refixing Old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No 74 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required ordered at Sites), complete all as specified and directed.
4
-
-
... More
-ditto- but for 20 mm bore, medium grade GI pipes
2
-
-
... More
S&F in repair Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Long Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and directed.
4
-
-
... More
S&F in repair Chromium plated brass Bib cock with wall flange, short body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
1
-
-
... More
S&F in repair Chromium plated brass Pillar tap, with aerator, fixed to wash hand basin, complete all as specified and directed.
1
-
-
... More
S&F in repair 15mm bore chromium plated single lever central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed.
8
-
-
... More
S&F in repair Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed Both Ends for Iron Pipe or for Unions complete all as specified and directed.
2
-
-
... More
S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed.
4
-
-
... More
S&F in repair Chromium plated brass two way Angle valve, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed.
4
-
-
... More
S&F in repairs for waste coupling chromium plated for sink /wash basin, suitable for 32mm dia waste pipe complete all as specified and directed.
(NOTE: This item shall only be measured for replacement in existing sinks, basins etc)
10
-
-
... More
S&F in repair PVC Waste Pipe 32mm bore (dia), 60-75 cm length (as required at Site), complete all as specified and directed.
(NOTE: This item shall only be measured for replacement in existing sinks, basins etc)
6
-
-
... More
S&F in repair chromium plated brass over head shower rose (100 mm dia) with arm , with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed.
3
-
-
... More
Taking down Wooden Chowkat or Frame with Shutter (without taking off Shutter from the Frame), exc. 1.5 Square Metre but not exc. 4.0 Square Metre Each, complete all as specified and directed.
42
-
-
... More
Taking down Chowkat or Frame (any type) with Shutter (without taking off Shutter from the Frame), n.exc. 1.5 Square Metre Each, complete all as specified and directed.
30
-
-
... More
Taking down and refixing of Shutters of any description in same opening n exc 1sq. m each complete all as specified and directed.
2
-
-
... More
Taking down Shutters of any description n exc 1 sqm each complete all as specified and directed.
1
-
-
... More
Taking down Shutters of any description n exc 1 sqm each complete all as specified and directed.
6
-
-
... More
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for fixing wire mesh including one shop coat of priming, complete all as specified and directed. (NOTE : Sheet glass for glazing shall be measured and paid seperately)
0.58
-
-
... More
M&L for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290, (Gde E- 165) complete all as specified and directed.
165
-
-
... More
S&F 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, incl bending or turning up, mitred angles, etc. as required complete all as specified and directed.
4
-
-
... More
S&F in repairs Steel rolling shutters, conforming to IS 6248-1979, thickness of laths 1mm, gear operated (mechanical) type with bevel gear box and crank handle, ball bearing, as specified including top cover, anchoring rod, hasp and staple, locking arrangement; erected in position as indicated including finishing with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
8.75
-
-
... More
S&F factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows & other frames/chowkhat of size 50x110mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N(Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.
(NOTE: MS hold fast/lugs or SS dash fasteners shall be paid for seperately. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made)
25
-
-
... More
-ditto- but for WPC frame/chowkhat of size 65 X 125 mm
50
-
-
... More
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with aluminium butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed.
(Note: Aluminium butt hinges and necessary S.S screws shall be paid separately)
24
-
-
... More
-ditto- but for 30mm thick wire mesh WPC door shutter with stainless steel (SS 304) wire mesh with wire dia 0.63 mm and average width of aperture 1.4 mm in both sides with member dimensions as under :-
(i) Top and middle rails :- 100 mm x 30 mm (ii) Lock rail :- 150 mm x 30 mm (iii) Bottom rail :- 200 mm x 30 mm (iv) Styles :- 150 mm x 30 mm
(Note: Quoted rate shall be deemed to included for the cost of SS wire mesh. Aluminium butt hinges and necessary S.S screws shall be paid separately)
16
-
-
... More
S&F Flush Door Shutter 35mm thick, Solid Core Construction with Block Board core and Plywood face Panels commercial type on both side with Decorative face Veneer with Lipping/Frame to match and fitted to Steel Frame, complete all as specified and directed.
3
-
-
... More
M&L Second Class Hardwood Plain Framed Panelled Shutter factory made 35mm thick (any number of Panels) with Panels of 12mm thick Veneered Particle Board, medium density or 12mm thick Plywood Board, BWR with commercial veneering on both faces and fitted to Steel Frame, complete all as specified and directed.
3
-
-
... More
M&L for 35mm thick second class hard wood Glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
(Note: SS Wire mesh & Butt hinges shall be paid separately)
3
-
-
... More
S&F Factory made solid PVC door frame (chowkhat) of size 100 mm x 45mm made out of 5mm thick single side prelam PVC Sheet & edges painted to match with the prelam sheet, frame reinforced with MS square tube of size 40mm x 20mm of 19 guage throughout the frame, fixed in opening as per specification & drg and as per manufacturer instructions complete all as specified and directed.
45
-
-
... More
M&L for Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC Sheet polyurethane painted on the front face & 2 mm thick prelam PVC sheet on back face with particle board core suppling & fixing in the frame at site with aluminium hinges ss per specification & drawing and fixing in the Frame complete all as specified and directed.
NOTE : Aluminium Hinges will be Measured and Paid under appropriate Item.
15
-
-
... More
S&F Butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
30
-
-
... More
S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Extruded Section, Fabricated type, anodised, complete all as specified and directed.
52
-
-
... More
S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and directed.
10
-
-
... More
S&F powder coated (medium thickness of powder coating 50 micron) anodised aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
97.37
-
-
... More
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable 150 mm long peg stays (01 No), hinges type B-21 100 mm long (02 Nos), suitable handle - 01No each shutter etc as per manufactures instruction complete all as specified and directed.
(NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle etc as described in item. Sheet glass shall be measured seperately)
29
-
-
... More
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc as per manufactures instruction complete all as specified and directed.
(NOTE:- Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle, Mortice Lock etc as described in item. Sheet glass shall be measured seperately)
28.39
-
-
... More
S&F powder coating aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.
30
-
-
... More
S&F Sheet Glass 5.50 mm thick, Tinted (as approved by GE), fixed to Aluminium Windows of size exc 0.50 sqm each pane complete all as specified and directed.
6
-
-
... More
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing in Square exc 0.50 Sqm in Each Pane of aluminium Windows complete all as specified and directed.
4.1
-
-
... More
S&F Sheet Glass 4.0mm thick, Frosted (as approved by GE), fixed to Aluminium Windows of size exc 0.50 sqm each pane complete all as specified and directed.
10
-
-
... More
S&F 12mm thick Prelaminated particle board / Engineered Wood Board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to aluminium frame work etc complete all as specified and directed.
1
-
-
... More
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
3
-
-
... More
S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
10
-
-
... More
Hacking out old broken Glass (any thickness, size, quality or description) from Wooden or Metal Frames, glazed with putty or fixed with beads, complete all as specified and directed.
1
-
-
... More
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and directed.
1
-
-
... More
S&F in repair Aluminium Handle 150mm long (weight not less than 120 Gram), Extruded Section, Fabricated type, anodised, complete all as specified and directed.
2
-
-
... More
S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and directed.
52
-
-
... More
S&F in repair Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and directed.
4
-
-
... More
S&F Aluminium Barrel Tower Bolt 100mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and directed.
90
-
-
... More
S&F in repair Aluminium Barrel Tower Bolt 100mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and directed.
10
-
-
... More
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed.
10
-
-
... More
S&F in repairs Door Spring of Mild Steel 150mm long, Ordinary Rat Tail type, Rod patteren Springs including Roller and Roller Plate welding with frame , etc., complete all as specified and as directed.
2
-
-
... More
Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hung /Sliding Type including replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and directed.
NOTE : Cost of Materials required for smooth functioning of Shutter shall deem to be included in the Quoted Unit Rate.
12
-
-
... More
M&L preparing new or previously untreated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying two Coat of Synthetic Enamel Paint (First quality), over a coat of wood primer complete, including cleaning the surface, all as specified and directed.
12.6
-
-
... More
S&F in repair Door Closer Aluminium (Die cast) body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram , complete all as specified and directed.
19
-
-
... More
S&F in repair Double Action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, Other Parts made of Mild Steel heavy duty, complete all as specified and directed.
1
-
-
... More
S&F in repair Mild Steel Mortice Lock 100mm in size, 4-Lever, Vertical type, complete all as specified and directed.
1
-
-
... More
S&F in repairs coloured rubberized interocking type floor tiles, suitable for gyms, tyre storage, etc non-slippery, shockproof, of size 600mm X 600mm X 15 mm thickness, fixed with suitable adhesive as per manufacturer's instructions complete all as specified and directed.
40
-
-
... More
S&F in repair Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side domes (as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and directed.
22.37
-
-
... More
GENERAL NOTES (APPLICABLE TO ALL ITEMS):-
(1) Certain items may be found to be repeated in the three parts of Schedule 'A'. Contractor shall ensure that same rate is quoted for such items irrespective of the location of work. If any variation is observed in the quoted rates, the lowest quoted rate from all the three parts of Sch 'A' shall be considered for payment purpose. No claim shall be entertained during currency of work.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements