Military Engineer Services Tender

Taking out unserviceable GI 3 way elbow from charpoy GI pipe and Supply and fixing new elbow 32 mm bore ISI marked matching with the existing shape and size complete all as specified and directed.

Taking out unserviceable GI check nut 10 mm thick 32 mm bore from charpoy GI pipe and Supply and fixing new check nut matching with the existing shape and size complete all as specified and directed.

Taking out unserviceable plastic newar from charpoy GI pipe and supply & weaving with new plastic newar 50 to 55 mm wide of best quality as approved by GE. Weaving shall be done closely as directed by Engineer-in-Charge including tightening of frame. All as shown in drg etc complete all as specified and directed.

REPAIR/RECANNING OF CHAIRS Material and labour for re-canning of Chair dining (FD-279) with plastic cane half round 2mm wide 0.4mm thick and border with 4mm wide and 0.40 mm thick half round plastice cane best quality as per Godrej pattern including removing of old cane complete all as specified and directed.

Material and labour for re-canning of Chair Easy (FD-229) with plastic cane half round 2 mm wide 0.4mm thick and border with 3 mm wide and 0.50 mm thick half round plastice cane best quality as per Godrej pattern including removing of old cane complete all as specified and directed.

Material and labour for re-canning of Chair Writing (FD-280) with plastic cane half round 2mm wide 0.4mm thick and border with 3 mm wide and 0.50 mm thick half round plastice cane best quality as per Godrej pattern including removing of old cane complete all as specified and directed.

Material and labour for re-canning of Bin solied linen both side with plastic cane half round 2mm wide 0.4mm thick best quality as per Godrej pattern including removing of old cane complete all as specified and directed.

Material and labour for re-canning of Stool dressing with plastic cane half round 2mm wide 0.4mm thick best quality as per Godrej pattern including removing of old cane and 4 Nos hard PVC shoe of 25 mm dia and 25 mm high shall be screwes to bottom of all legs complete all as specified and directed.

Material and labour for re-caning of chair verandah (FD-256) with plastic cane half round 4mm wide 0.4mm thick, best quality, as per Godrej pattern including removing of old cane complete all as specified and directed.

Material and labour for preparing of old surface of chair verandah (FD-256) steel and chair verandah MAP and applying one coat of synthetic enamel white paint including provision of 4 Nos rubber shoes for each chair complete all as specified and directed.

Material and labour for welding to chair verandah and chair verandah MAP complete all as specified and directed.

Material and labour for replacement of chair verandah MAP seat and back as per drawing and complete all as specified and directed.

Taking out unserviceable ply top from Charpoy GI pipe and supply and fixing new plywood 12 mm thick of size 1990mmx910mm exterior grade BWR ISI marked , IS code 303 Make : Archid ply. Before fixing of plywood all steel surface should be cleaned, loose part of charpoy to be framed and frame to be tightened including MS plate 3mm thick in round shape should be welded at the bottom of all legs also be welded . Making 03 nos hole of equal size on both long rail and 02 nos holes of equal size on both short rail by drill machine .S&F of 02 (Two) Nos of MS flat stiffners of size(40x5x900mm) at equal distance on both the long rails. M&L for painting of all charpoy GI pipe and MS stiffner with two Coat of synthetic enamelled aluminium paint over a coat of red oxide . After that plywood in all four Corners of the ply duly round Shape and smoothened by using sand paper etc should be fixed with cap type nut & bolts as per sample held with BSO (South) Furniture Yard . All as specified and directed by Engr In Charge . Note: Plywood will be dumped in advance before commencement of work along with purchase voucher of authorised manufacturer as per approved sample by GE. complete all as specified and directed.

NOTE: - (i) Amount of credit of Rs. 21,058.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender. (ii) Drawings are not attached with the tender documents and drawings with upto date revision as on End date of bid submission shall be applicable. These shall be referred from standard furniture drawings circulated by Engineer-in-Chief’s Branch which are supposed to be available with the contractor; however contractor may see these drawings in the office of BSO (South) Ambala in any working day during the office working hours.