Military Engineer Services Tender

S&F butt hinges stainless steel 100mm long medium weight etc complete all as specified and directed.

S&F aluminium anodised extruded fabricated type handle 150mm long etc complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed etc complete all as specified and directed.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames exceeding 1.5 Sqm but not exceeding 4 sqm incl dismantling of brick work for hold fast complete all as specified and as directed.

S&F anodised aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hudrolic floor door spring (Make - Sandhu/Titz) shutters to be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBAIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of RCC/Stone/Concrete/brick walls/Asbestos cement sheet or plastered surface and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and size complete all as specified and as directed by Engineer-in-Charge. Note :- Sample of camouflaging pattern to be approved by GE as per user requirement

M&L for complete removal of existing treatment from RCC/Stone/Concrete/brick walls/Asbestos cement sheet or plastered surface and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and size over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Note ;- Sample of camouflaging pattern to be approved by GE as per user requirement.

M&L for complete removal of existing treatment from plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali-resistant primer over 1 mm wall care putty complete all as specified and directed.

M&L for preparation of plastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion on old surfaces upto any height including necessary scaffolding as required, complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old painted steel surfaces complete all as specified and as directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for 100mm thick PCC 1 :4 :8 type D-2 ( using 40mm graded mechanically crushed stone aggregate ) as in sub base of floors complete all as directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified.

M&L for PCC (1 : 2 : 4) type B0 (using 12.5mm graded mechanically crushed stone aggregate) as in roof kerbs, mud stop, benching, coping padding and the like complete all as specified and directed.

M&L for Chequered cement concrete prepolished colour tiles 30 cm x30 cm x 25 mm thick,set jointed and pointed in neat cement slurry in floor using grey cement with pigment.including 20 mm thick screed bedding in CM 1:6 over complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed .

M&L for Cleaning out of all the walls and floors of SWTs from the algae, vegetation including draining out of water and the like by suitable means and making good the disturbed surfaces where ever required incl material and labour complete all as specified and directed.

M&L for water proofing treatment to SWT Walls/Concrete floor as under :- (a) Making staging/scaffolding as per site requirement. ( b) Removing of loose concrete and existing plaster from the surface of SWTs. ( c) Chipping the entire surface to make roughen to receive the gunite. (d) fixing the additional reinforcement bars where the steel bars are rusted if reqd.. (f) Sand blasting the surface to remove the rust from the existing reinforcement if required. (g) Fixing of PVC nipple for grouting at honeycombed surface as per site condition if required. (h) Fixing of 3" x3"x10G welded wire mesh to the entire surface. (j) Applying of 50mm thick average guniting with CM 1:3.5 (1 cement : 3.5 course) sand with mixing of water proofing epoxy compound. (k) Grouting the nipples with non shrinkage compound. (l) Curing the gunited surface for 7 days and removing all the scaffolding etc complete.

S&F in repair stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples complete all as specified and directed. .

S&F 3mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each panes complete including hacking out old broken glass (any thickness) size , qauality or description from wooden/steel frames etc complete all as specified and directed.

Dismantling of boarding including fillets of any description fixed in any position with nails/screws etc complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixed at site on PVC frame as per specification and dwg complete all as specified and direcrted.

S&F 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame etc complete all as specified and direcrted.

Demoliton of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets ) any thickness, including cover fillets, complete all as specified and directed.

S&F powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves at appx 900mm cenetre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each swith lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified including 9 to 10mm thick ceiling tiles/board for insulation and accoustic purpose of size 600 x 600mm decorative type with silver foil coating on back side complete all as specified and directed. Ceiling board should of make : Saint Gobian/Armstrong/Gysboard/Hilux/Kingston for insulation and accoustic purpose fixed with staples with on snap grid and 4mm dia GI wire with nuts, bolts, adjustable arrangement and washers etc complete all as specified and directed.

Dismantling old unserviceable RCC/PVC water tank of capacity exceeding 250 but not exceeding 500 ltrs capacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed.

S&F in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs coloured oval type wash hand basin, size 550x400 mm, white flat back, irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe 32mm, coupling etc fixed as in counter slab etc complete all as specified and directed .

S&F in repairs, 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood back and fixed to wooden plugs with chromium plated brass screws and cup washers complete as specified and directed

S&F in repair CP grating of size 125mm complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts , flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed..

S&F in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete as specified and directed.

S&F in repair brass ball/lfloat valve with PVC ball complete suitable for 20mm bore pipe complete all as specified and directed

M&L for sand filling under floors/firing range pavement or in foundation including watering and consolidation. Note: Item is to be executed at any height of firing range. Porsion shall be deemed to be included in the quoted rate cost of necessary scaffolding and security

Supply and laying saw dust in small firing range but with compacted thickness as specified and directed. Note Item is to be executed at any height of firing range. Porsion shall be deemed to be included in the quoted rate cost of necessary scaffolding and security