Military Engineer Services Tender

M&L for PCC 1:4:8 type D-2, (40mm graded Stone aggregate) as in Foundation ,filling and Mass Concrete.

M & L for brick work with sub class 'B' Bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 as complete, all as specifed and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, surface channel,bed block for rungs, window cills etc including necessary form works complete all as specified and as directed by Engr-in-charge

Demolition of brick masonry, built in cement mortar of any description all as specified and as directed by Engineer-in-Charge.

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scafolding and all safety measures)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete external surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.

M&L for preparing new decorated plastered surfaces of walls including cornices plasters by brooming down or steel wire brusing, scraping down, smoke spots and M&L for applying two coat of Oil emulsion paint 100% acrylic of approved colour over a coat of primer and over 2 to 3 mm thick birla putty punning complete all as specified and as directed by Engineer-in-charge

S & F vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor finishes complete all as specified and as directed .

M&L for suspended false ceiling consisting of suitable GI sections of ‘T’ Angle & FI as per Std engineering practices with ‘E’ board classic ceiling boards 4mm thick in grid of 0.60x0.60mtr including cutting holes and making good holes for main joints, suspending with 4mm dia GI wire to roof slab, roof trusses, purlins & rafters etc complete all as specified and as directed .

Taking down chowkats or frame with shutter of area exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.

S&F aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed as specified (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as specified. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per spd. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as spd. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per spd. (g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent. (h) Six lever mortice lock brass one in each door. (j) 12 mm thick particle board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass/Plain glass(Coloured) 5mm thick.

S & F MS Framed work such as grills, gratings as in duct with ornamental & intricate design for windows, ladder etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars, incl hinges, framed balusters, walk ways; railings & similar work conforming to Fe 290 GDE -E-165

M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge.

Removing of surplus soil excavated material and debries to a distance exc 10Km but n exc 15Km and deposited where directed at level not exceeding 1.5m above the starting deposited complete all as specified and as directed.

Excavation in post holes not exc 0.5 Cum, getting out, returning filling in layers n exc 25cm in thickness and removing surplus soil to a distance n exc 50 in Soft/Loose soil, complete all as specified and as directed by Engr-in-Charge

M&L for PCC 1:3:6 type C-2, (40mm graded Stone aggregate) as in Foundation ,filling and Mass Concrete complete all as specified and as directed by Engr-in-Charge.

M&L for Mild Steel Structural Work as in Stanchion and Column including covering plate from Steel Sections conforming to Fe-410-0 or Fe-310-0 including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed.

M&L for Mild Steel Structural Work as in Rafter and Purlins including covering plate from Steel Sections conforming to Fe-410-0 or Fe-310-0 including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed.

S &F 0.50 mm thick Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100mm thick for sub base complete all as specified and directed.

M&L for Cement concrete type B-2, 1:2:4 (40mm graded aggregate) 100 mm thick as in floor base complete all as specified and directed.

E/M Schedule

Supply, install,commissioning and testing Invertor type 5 star rated air cooled split unit air conditioner electric driven single phase of capacity 2 TR,Eco friendly refrigerant, hi wall split units indoor and outdoor unit complete with cordless remote control unit and with inbuilt air ioniser and Plasma filter for better indoor air quality with 5 star rated, auto restart facility, 100 % copper tube and condenser , including excess copper tubing if required beyond the length supplied with AC unit and PVC conduit of 15mm dia not exceeding 2.5 mtr long for water drain and making good to disturbed surface with cement mortar ratio of 1:3 and testing complete all as specified and directed by Engineer-in-charge. Make :Voltas Model No 4502863 -245V ADZ or equivalent in LG/ Hitachi / Daikin as approved. Note:- (i) Rate quoted for items includes cost of all civil work like cutting to wall ceiling, floor, filling with PCC, finishing the surfaces with existing to match etc, if required for installation of AC unit as directed. (ii) Required copper pipes for installtion shall be deemed to be included in the quoted rates (iii) Old item retrieved shall be removed deposited to the AGE E/M store , the cost of the dismantling transporting and depositing shall bedeemed to be included in qouted rate

Supply and fixing Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2.0 KVA

M&L for sub main wiring of four run with 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-and-caping of size 25 x 16 mm medium grade and accessories of suitable size and fixed on wall/ceiling including two run of 6.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

Supply & fixing sheet metal enclosure for 220 volts 20 Amps with a three pin and earth plug top with socket and one single pole MCB 20 amps complete as well as specified and directed.

M&L for extension of AC duct of suitable size from existing line to work space upto 10 mtr length with necessary civil wk as per site requirement including testing complete all as specified and directed by Engr-in-charge

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core of 1.1 KV grade

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc. and getting out soft/ loose soil complete.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm complete.

Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Supply and laying clean dry sand for cable cushioning including gently punning down complete. Note :- Compacted / punned thickness of sand shall be measured for the purpose of payment.

M&L for old size , burnt brick, sub class 'B', laid in trenches, abutting each other with a gap not exceeding 10 mm , laid flat over the cable for cable protection complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregates) for filling in road cuts/ hard standing etc all as specified and as directed.

Supply, Installation, Testing and Commissioning of Waterless Maintenance Free Earthing Based on Pre-Casted Conductive Earthing Electrode Dimensions Length x Dia (mm): 10000 x 80 using 17.2mm Solid Conductors (Copper Bonded) upto bore depth level with copper bonded terminals, lugs & latches. Conduction: Non Ionic Movement of Ions with multi point dissipation contacts exceeds grade 25 concrete with Ph neutral internal material with eco friendly having relative density of 890-990 kg/m3. Earthing material is having 3000 times more effective than Bentonite. The Earthing electrolytic corrosion resistance is 86% reduction in corrosion with Short Circuit Current (Tested): Peak: 40 KA RMS: 22 Kilo amps for 1 Second also having mechanical strength of Grade 25 concrete. The Earthing high fault current test withstand of 1686 V for 500ms. The Earthing Standards as per: IEEE 80:2000 & BS 7430, Resistance value is Less than 1.0 Ohm. The Heavy Duty Earth Pit Cover will be provided. Warranty: 03 Years Make: Marconite / ITPC MetChem / Curenite / Kratonite / KE Elephant / Or MES Approved make with similar specifications.

Supply fabrication, installation & commissioning of dust & vermin proof totally enclosed, Indoor type LT, 3 phase 4 wire feeder pillar box factory made (CPRI approved), double door cubical type of suitable size made by 2.0 mm thick ms sheet with MS angle iron frame of size 40 x 40 x 6mm , front door opening with locking arrangement complete painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary fixing with PCC 1:2:4 of size 0.3m x 0.3m x 0.6m for 4 Nos legs, inclusive of under mentioned items fixed inside with suitable arrangement vertically operated an internal connection with PVC insulated stranded single core copper cable of suitable size of using insulated copper strip of appropriate size and connection of all incoming and outgoing cable included extended the cable from cable loop if required using aluminium/Copper cable terminal sockets / lugs as required duly crimpled comprising of following: Size of LT Panel box is 1.2 x 0.9 x 0.5 Mtr. INCOMING:- (i) MCCB AC 415 volts, adjustable thermal & adjustable magnetic setting. 4 pole current rating 200 Amps, breaking capacity 36 KA =01 No. Make : legrand/siemens/schiender/Havells (ii) 4 strip copper bus bar of size 25x10 mmthickness and 0.9 Mtr long with specifix colour (R,Y,B) including insulation sleeves - 01 set. (iii) Metering panel comprising, volt meter and ammeter, digital type with selector switches, CTs control fused and indicating lamps make of volt meter , ammeter AE/IMP as specified. and make of indicating lamps legrand/L&T complete all as specified and directed. OUTGOING: (i) MCCB, 100 Amps ,AC 415 volts 4 pole, breaking capacity 16 KA =03 No's .

Supply, installation, commissioning and testing for 105KVA =105 KW 5* ups System with Inbuilt Isolation Transformer with CVCF in 3:3 configuration. with ,battery backup time 15-20 mints battery interlinks ups to battery cable 2 years Warranty : As per MPS standard Model –IND –REG-3300 Part No 3300105. FEATURES : HSN CODE 85044090 battery- 85072000 stand & links 73012090 • True Online, double conversion, PWM, IGBT-4 technology. • DSP technology Fully digitized microprocessor control design • 0.99 output power factor • True Galvanic Isolation transformer design • High frequency, pure sine wave output • Suitable for leading power factor loads • N+X parallel redundancy • LCD display • Back feed protection • Wide input voltage and frequency window • Zero transfer time • Superior overload capability • High battery reliability (battery test, manual and automatic) • Smart battery management system monitors the battery charging and discharging status • RS232 interface standard, dry contacts, USB, RS485 and SNMP as optional

Supply, installation, testing and commissioning of Silent Diesel engine driven generating set 82.5 KVA (66KW) 415Volts 3 phase 50 HZ confirming "IS 10001/10002 : Diesel engines meeting the latest CPCB norms for emission complete with comprising the following:-

(A) Engine: (i) RPM 1500 (ii) Liquid cooled type

(B) Alternator: (i) Capacity - 82.5 KVA (ii) Brushless 3 phase 0.8 power factor 1500RPM/ 50Hz, SPDP enclosure with H class insulation confirming to IS-4722 *IP-23 Protection * Permanent lubricating bearing * Permissible overload of 10% for one hour in 12 hours operation.

(C) AUTO MAINS FAILURE panel for 82.5 KVA DG set with all connection & accessories with necessacry bypass arrangements.

(D) Others: (i) Fule tank (ii) Electrical battery voltage 12Volts with Battaries. Make:- Exide (iii) Micro-processor based Genset controllers display a host of genset parameters - Phase voltages & currents, frequency, Reverse power, Genset KVA, KW, KVAr, KWH, Power factor, Canopy Temperature, Lub oil pressure, Enginer temperature, RPM, Run hours, Number of starts, fuel level, Auto/Manual stop, battery charge condition & AMF features. (iv) Diagnostic Features:- Battery Charging failure, Over/Under speed, over current, over/under voltage, over KW, phase seq, phase missing, mains under voltage, earth fault trip & fuel usage alarm.

(E) BASE PLATE :- Base plate shall be MS fabricated and strongly welded duly ribbed suitable for receiving engine, alternator alongwith flexible coupling it shall be include set of bolts, washers, rubber coupling, drip tray and protective screen around coupling complete. Note: The complete generating set including engine/alternator shall be factory assembled by manufacturer or its autorized dealer as approved for assembling the DG sets. The DG set shall be assembled by OEM.

(F) DG SET FOUNDATION : DG set shall be installed on PCC M-15 foundation complete all as per recommendation and specification of OEM. It shall be extended 01 Meter all around the DG set acoustic enclosure. It shall be 300mm above ground level deemed to be included in quoted rates.

(G) ACOUSTIC ENCLOSURE FOR DG SET The DG shall be covered with Acoustic enclosure fabricated of MS channel & CRCA sheet 2mm thick having doors, insulation sides and top by mineral rock wool confirming to IS-8183 of adequate thickness acoustic louver/outlet, ventilation system, complete as per manufacturer recommendation with wiring and lightening arrangements, duly painted with weather proof & anti corrosive chemical. Forced ventilation shall ve provide by axial flow fan 1440 RPM suitable capacity exhaust fan and inside temp shall not be rise more than 5-8 degree centigrade.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

S&F TPN vertical loadline DBs are fitted with busbars, neutral links, blanking plates (without MCCBs) 415 Volts 4 way double door type complete all as specified and directed.

S&F TPN vertical loadline DBs are fitted with busbars, neutral links, blanking plates (without MCCBs) 415 Volts 8 way double door type complete all as specified and directed.

S&F TPN 415 Volts 4 way double door type DB complete all as specified and directed.

S&F Distribution board SPN 240 Volts 02 ways single door complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA suitable for fixing in VTPN distribution board complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable thermal and fixed magnetic setting type 100 Amps with breaking capacity 16 KA suitable for fixing in VTPN distribution board complete all as specified and directed.

S & F MCB SPN of rating 40 Amp, 240 Volt, 10 KA, 'C' series type complete all as specified and as directed.

S & F MCB SPN of rating 6-32 Amp, 240 Volt, 10 KA, 'C' series type complete all as specified and as directed.

S & F MCB TPN 63 Amps, 415 Volt, 10 KA, 'C' series type complete all as specified and as directed.

M&L for point wiring for 15 Amp switch socket for power point complete with 2.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20X12 mm PVC casing-n- copping and its accessories, cadmium screws and including 2.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing the specified and directed.

M&L for point wiring for 5 Amp switch socket independent board complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20X12 mm PVC casing-n- copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing the specified and directed.

S&F Modular switch, one way 6 Amps , 1 module as specified.

S&F Modular Socket , 6 A-2/3 Pin combined 2 module all as specified and directed.

S&F twin socket modular type heavyduty out let 6 pin 6/16 Amps 2 module,

S&F switch Modular type 16 Amps , single pole one way 240 volts one module as specified.

Supply & fix Modular White cover plate with frame for 3 module

M&L for sub main wiring of four run with 06 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-and-caping of size 25 x 16 mm medium grade and accessories of suitable size and fixed on wall/ceiling including two run of 6.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

M&L for sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC casing-and-caping of size 25 x 16 mm medium grade and accessories of suitable size and fixed on wall/ceiling including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

S&F IP65, 200 watt Energy saving, environment friendly & robust Highbay/ Mediumbay LED luminaire with high efficacy including necessary arrangements complete all as specified and as directed. Make : Havells Cat part No BAYBRITESAUCERHBP 200W LED757 WBTOLT G / equivalent specification make of Crompton/Orient/Bajaj

Note The amount of Rs 900/- against Schedule of Credit on Page No 140 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance