Military Engineer Services Tender

Attending of complaints pertaining to faulty/Non-functional/working state of all accessories/equipments pertain to internal Electrification /ceiling fan/exhaust fan/DBs through telephone or in person during the working hours on detailment by MES Service centre for JCOs/ORs Md Accn of Hisar Mil Stn by deploying electrician and helper for locating and rectifying the faults which includes fault from Elect Meter/TPN/SPN DB onwards to Sub Main /Point wiring including replacement of fixtures like power and light socket, fan,exhaust fan, bell, security light of bldgs etc complete and carrying out repairs to the extent of disconnection and dismantling of faulty wires, submain wires, battens, bulk head lights conduits, boxes, Main switches, MCB, DBs, fan regulators, ceiling fans,exhaust fans and other E/M faults pertaining to particulars equipments for the rectification of defect and refixing of existing dismantled serviceable articles complete all as directed. Scope of work shall include:- (i) Replacement of bulbs /tubes held by users which will be handed over the repairer if so required. (ii)Taking down ceiling fan/exhaust fan of any make and any sweep at site, cleaning dust and opening up for examination, cleaning all parts and providing fresh lubricant to bearing/bush (oil or grease reqquired) fixing the fan in position after assembling and adjustment for proper running including testing for smooth running complete all as specified and directed. (iii) Installation of PVC canopy of Ceiling fan, blades of ceiling/exhaust fan, capacitor of any size for ceiling/exhaust fans, MS down rod for ceiling fan, frame and louvers for exhaust fans, hanging hook with washer,nut,bolts and rubber packing complete. (iv)The rate of job refers to maintaining the station internal electrification during the work excluding holyday /Sunday as directed by Einginner incharge . (v) The rate inclusive of maintaing daily complaint (point ) wise register/complaint slip etc signed by both parties or as directed by Engineer in charge (VI) The cost making good and matching the existing disturbed surface caused during these complaints shall be deemed to be included in this item . (VII) All the T&P required for excution of works shall be arranged by the contractor . (VIII) Cost taking down and ; removing and refixing of MCB DB,MCBs,LED Lights,switches,sockets,PVC blocks, Cover plates,bulb holder,junction box,fan regulator,capacitor etc item to; be replaced / repaired shall be deemed to be included in this item. Note: (i)Penality will be charged @ 250 Rs per day on absent of either mechanic/helper or Both. (ii) Cost of cable PVC copper flexible of size 23/0.0076 three core from ceiling rose to fan will be paid under appropriate item of schedule.

Dis-assembling carefully ceiling fans (any make) of 1200/1400mm sweep, cutting & removing old copper winding wire and rewinding the same with new super enameled copper wire of suitable size / gauge and weight not less than 325 gms including providing insulation by varnishing, oiling and greasing, replacing bearing and gun metal shaft required and reassembling back including testing complete. Note :- (i) Cost of bearings provided shall be measured in this item and nothing will be paid extra on this account. (ii) Working space if required, will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises (iii) If winded fan found unserviceable within six month of rewinding,contractor will repair the same without any extra cost. (iv)Cost of Machining work in body of ceiling fan by taking out worn out bearing, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account. (v) Cost of carrying ceiling fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard (vi) Cost of shaft will be paid under appropriate item of Schedule.

Dis-assembling of exhaust fan of size 250mm/ 300mm AC 230 Volts, 50 Hz 900/1400 RPM for repair, removing existing burnt winding wire, bearing/bushes, flexible wire, shaft, check nuts, frame and rewinding with super enameled copper windings wire of suitable size and weight not less than 450gms and replacement of bushes, bearings, shafts, check nuts, bolts and washers, greasing, varnishing and reassembling back including testing complete. Note :- (i) Cost of bushes/bearings, provided shall be measured and paid in this item and nothing extra shall be paid on this account. (ii) Working space if required,will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises. (iii) If winded exhaust fan found unserviceable within six month of rewinding,contractor will repair the same without any extra cost. (iv)Cost of Machining work in body of exhaust fan by taking out worn out bush, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account. (v) Cost of carrying exhaust fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard. (vi) Cost of shaft will be paid under appropriate item of Schedule.