Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 59,982Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_669224_1Tender No
GE(SOUTH)/AMB-22/2024-2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Material and labour for factory made PVC moulded, dark grey coloured coloured with grey cement and no pigment, interlocking designer paver blocks (double glassy), of approved shape, confirming to IS-15658-2006, 60mm thickness, M-35 grade, as in path, hard standing, etc. complete all as specified and directed.
NOTE : - Size and shape of interlocking tile shall be approved by GE before incorporation of work
270
-
-
... More
Material and labour for factory made PVC moulded, dark grey coloured coloured with grey cement and no pigment, interlocking designer paver blocks (double glassy), of approved shape, confirming to IS-15658-2006, 80mm thickness, M-40 grade, as in path, hard standing, etc. complete all as specified and directed.
NOTE : - Size and shape of interlocking tile shall be approved by GE before incorporation of work
40
-
-
... More
Material and labour for providing and laying of precast cement concrete solid concrete block, type B-1, 1:2:4 (using 20mm graded stone aggreagate) confirming to IS 2185 (Part-I) 2005 of 45/30 cm high, 10 cm thick and of suitable width including chamfers, weatherings, throating etc as in kerb continuous edging jointed in cement mortar 1:4 and struck flush pointing as the work proceeds and finishing with neat cement flush joint etc complete all as specified and directed.
1
-
-
... More
Material and labour for PCC type B-1 (1:2:4) using 20 mm graded aggregate as in kerbs of mud stops, rounded or chamfered on edges, etc complete all as specified and directed.
1
-
-
... More
Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with 85/25 grade bitumen and sand (1:3 ratio) mixture complete all as speciifed and directed.
100
-
-
... More
Material and labour for cleaning the roots top surfaces, brick tiles or concrete surfaces by picking, vegitation roots, sweeping clean and washing down with water to remove dust etc and filling & damaged joints of brick tiles in CM 1:4 complete all as speciifed and directed.
100
-
-
... More
Material and labour for 40mm thick average thickness PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) with WPC @ 2% as in roof padding, levelling course and finishing top surfaces even and smooth using extra cement to receive APP membrane complete all as specified and directed
100
-
-
... More
Material and labour for APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm below APP and two coats water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface complete all as specified and directed. NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.
120
-
-
... More
Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 250 litres and not exceeding 500 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engineer-in–charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it.
3
-
-
... More
Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 500 litres and not exceeding 1000 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engineer-in–charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it.
1
-
-
... More
Supply and fixing of 5 mm thick solid coloured / textured PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
50
-
-
... More
Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos/PVC/ metal / Gysum sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed.
NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.
50
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and directed.
880
-
-
... More
Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
400
-
-
... More
Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.
50
-
-
... More
Material and labour for premium quality, dark shade vitrified ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) complete all as specified and directed.
50
-
-
... More
Material and labour for premium quality coloured glazed ceramic tiles (350x 450x 7 to 8mm thick) as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement plaster 1:4 finished rough surface to receive tiles complete all as specified and directed.
150
-
-
... More
Material and labour for 18 to 20mm thick granite stone of black shade work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges complete all as specified and directed.
15
-
-
... More
Material and labour for machine cut kota stone slab 20-25 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
200
-
-
... More
Material and labour for machine cut kota stone slab 18-20 mm thick size of each stone in single piece (of length not more than 1200mm), laid on vertical surfaces of riser of steps, skirting/dado, over and including cement screed bed 15 mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
15
-
-
... More
Supply and fixing of heavy duty tiles (coloured), good grip series, size 400 mm x 400 mm x 10 mm thick, pattern as approved, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed including demolitin of floor etc complete all as specified and directed. NOTE : - Design/pattern shall be as approved by GE before execution of work.
100
-
-
... More
Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.
10
-
-
... More
Material and labour for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
8
-
-
... More
Material and labour for brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) complete all as specified and directed. NOTE : - Old bricks obtained from demolition shall be re used. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.
2
-
-
... More
Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as speciifed and directed
350
-
-
... More
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:6 finished even and smooth without using extra cement complete all as speciifed and directed.
150
-
-
... More
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 finished even and smooth without using extra cement complete all as speciifed and directed.
350
-
-
... More
Material and labour for rendering 10mm thick in CM (1:3) on ceiling surfces finished even and smooth without using extra cement complete all as specified and directed.
10
-
-
... More
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer complete all as specified and directed.
150
-
-
... More
Material and labour for preparation of old decorative surface of wall including washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and as directed.
200
-
-
... More
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.
350
-
-
... More
Material and labour for preparation of old decorative surface of wall etc by washing rubbing down including scrapping and applying one coat of cement base paint of any tint complete all as specified and directed.
500
-
-
... More
Material and labour for preparation of new plastered surfaces of ceilings and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer complete all as specified and directed.
10
-
-
... More
Material and labour for preparation of old decorative surface of ceilings and applying one coat of oil bound distemper complete all as specified and as directed.
30
-
-
... More
Material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel complete all as specified and directed.
100
-
-
... More
Material and labour for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
60
-
-
... More
Material and labour for preparation of old decorative surface of walls, chajjas, balcony, pillars, fascia etc (for red border) by washing & rubbing down etc and applying one coat of exterior emulsion paint complete all as specified and directed.
100
-
-
... More
Taking up or down steel tubing/ and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed.
70
-
-
... More
Supplying and laying of CPVC pipes 16mm OD SDR 11 & Plain CPVC SDR 11 fittings complete to walls and ceilings or laid in floors including making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
70
-
-
... More
Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed.
40
-
-
... More
Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings complete to walls or laid in floors/roofs including making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed.
40
-
-
... More
Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. NOTE: - Tank shall be white and make of tank shall be engraved on the tank.
5
-
-
... More
Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. NOTE: - Tank shall be white and make of tank shall be engraved on the tank.
4
-
-
... More
Supply and fixing in repair of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.
9
-
-
... More
Supply and fixing in repair of stop cock, fancy type, chromium plated, long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified.
(NOTE: - Weight of stop cock shall not be less than 0.575 Kg)
10
-
-
... More
Supply and fixing in repair of CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed. (NOTE: - Weight of bib tap shall not be less than 0.575 Kg)
20
-
-
... More
Supply and fixing in repair of vitreous china squatting pan of 'Orissa' pattern' size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed.
3
-
-
... More
Supply and fixing in repair of vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified.
5
-
-
... More
Supply and fixing in repair of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair of 10 litre capacity virgin polypropylene cistern, white at low level complete with 32 mm bore PVC flush pipe of suitable length, PVC connection 450 mm long having PTMT nuts including bracket and making all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair of fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as directed.
10
-
-
... More
Supply and fixing in repair of chromium plated towel rail 600mm long complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair of chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union with shower arm complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair of anodised aluminium grill of diamond size 100x100mm of dia 6mm including necessary joining cleats, anodised aluminium snap beading screws, complete all as specified and directed.
10
-
-
... More
Supply and fixing in repair of aluminium body door closer hydraulically regulated, designation, No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg, complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair of vitreous china bowl urinal flat back, size of 465X355X265 mm white with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:4 complete all as specified and as directed.
5
-
-
... More
Supply and fixing in repair of 32/38 mm PVC waste pipe for wash hand basin,urinal and sink complete all as specified and directed.
20
-
-
... More
Supply and fixing in repair of PVC connections 450/600 mm long and 15mm dia PTMT with PVC washers on both ends, complete all as specified and directed.
10
-
-
... More
Supply and fixing in repair of PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
10
-
-
... More
Supply and fixing in repair of CP Jet spray for with 1.5 mtr long pipe fixed in EWC complete all as specified and directed.
8
-
-
... More
Supply and fixing in repair of CP health faucet with 1.5 mtr long pipe fixed in EWC complete all as specified and directed.
8
-
-
... More
Supply and fixing in repair of CP grating 100/75 mm dia with or with out holecomplete all as specified and directed.
12
-
-
... More
Demolition and breaking up drain pipes internal dia 100/75 mm in wall or floor postion (Salt glazed ware, AC or Reinforced concrete, PVC or any other type) complete all asspecified.
60
-
-
... More
Supply and fixing of PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or in floors complete as specified and directed.
40
-
-
... More
Supply and fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floor complete as specified and directed.
20
-
-
... More
Supply and fixing in repairs of 100mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed.
7
-
-
... More
Supply and fixing in repairs of 75mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed.
5
-
-
... More
Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.
2
-
-
... More
Supply and fixing in repair of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg board or commercial plywood, fixed with aluminium angled frame and two CP MS hanging arrangements complete all as specified and directed.
5
-
-
... More
Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.
(NOTE : - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
15
-
-
... More
Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.
(NOTE: - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
10
-
-
... More
Taking down shutter of any descritption exceeding 1.00 sqm each but not exceeding 2.00 sqm each including removal from site complete all as specified and directed.
10
-
-
... More
Supply and fixing of providing Solid WPC Door frame size ( 125mm X 65mm Double Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed. The door frame should be Water Proof, Termite Proof, Fire Retardent and having excellent screw holding capacity.
75
-
-
... More
Supply and fixing of providing solid WPC door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed . The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity.
45
-
-
... More
Supply and fixing of 30 mm thick moulded WPC factory made 100% solid door (confirming as per IS : 4020) made from 100% lead free single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kh/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be water proof, termite rpoof,fire retardent and having screw holding capacity complete all as specified and directed.
54
-
-
... More
Supply and fixing of providing 30 mm thick factory made 100% Solid WPC (Wood polymer Composite) gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company
18
-
-
... More
Supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.
10
-
-
... More
Supply and fixing of factory made 35 mm thick, second class hard wood rail and style, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commrcial veneering on both faces ace, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.
5
-
-
... More
Supply and fixing of 2nd class (hollock) factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.
5
-
-
... More
Supply and fixing of factory made PVC hollow door frame of size 50mm x 47mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos, 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos of screws to be provided for each vertical numbers & minimum 02 Nos for horizontal member) complete all as specified and directed.
15
-
-
... More
Supply and fixing of wood free EPS factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face including fixing in frame at site with 03 Nos stainless steel hinges, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.
4
-
-
... More
Supply and fixing in repair of aluminium alloy anodized (powder-coated) door frame and partly glazed shutters with hollow aluminium anodized sections including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip, jointing cleats, rubber packing, gasket, dead lock 4 levers, 02 Nos aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and directed. Sections of frame and door shall be as follows : -
(a) Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick (b) Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c) Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick.
(d) Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick.
(e) Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick.
(f) Gauging clip weighing not less than 0.097kg/metre.
NOTE:- Glass pane shall be measured and paid separately
10
-
-
... More
Supply and fixing in repair of aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as specified for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, stainless steel hooks and eyes, aluminium anodized barrel tower bolts, glazing clips, joint cleats, rubber packing, gaskets etc for series-B “ Jindal” section numbers for casement window.complete all as specified and directed comprising of followings :-
(a)Frame of section 101.6mm x 44.45mm x 2.10 mm thick and section for shutter 47.62 mm x 44.45 mm x1.95 mm thick.
(b) Mullion 53 mm x 52 mm x 2 mm thick not less than 1.065 kg/mertre.
(c) Glazing clip weighing 0.259kg/mtr. (d) Window shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98 mm and thickness 2.37mm weighing 0.875kg/mtr and 01 no for each open able leaf. NOTE: - Glass pane shall be measured and paid separately.
5
-
-
... More
Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skelton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable including PCC (C-O ,1:3:6 using 12.5 graded stone aggregate) bed blocks for hold fasts including taking down existing window any type complete all as specified and directed.
NOTE: - (i) For the purpose of measurement & payment double shutter both glazed and gauzed with frame shall be considered as one unit.
(ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of red oxide primer . The pattern of grill shall be all as shown on drawing.
(iii) Glazing, wire mesh and painting shall be measured and paid for separately.
4
-
-
... More
Supply and fixing in repair of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work.
(Make : Elixir Met Form Pvt Ltd. / A2Z Infra Solutions / Urban Space)
20
-
-
... More
Supply and fixing of 18 mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification including fitting i.e. magnetic catcher,stainless steel handle approved including dismentaling existing board any type complete all as specified and directed.
40
-
-
... More
Dismantling asbestos cement, steel roof sheets (corrugated, semi corrugated etc) sheets any pattern in roof covering in patches etc of any description complete all as specified and directed.
520
-
-
... More
Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of red/any colour, having tensile strength of 550 MPa, as in chajjas and protection, fixed with self tapping screws or J type hooks including rubber washer etc complete all as specified and as directed. NOTE : - The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
40
-
-
... More
Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of red/any colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc complete all as specified and as directed. NOTE: - The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
400
-
-
... More
Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based plain steel sheet, 0.50mm thick, conforming to IS-15961, of red/any approved colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc complete all as specified and as directed. NOTE: - The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.
40
-
-
... More
Material and labour for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L-type or J-type or cranked hook bolts including washer in patchs etc complete all as specified and directed.
40
-
-
... More
Material and labour for PCC in roof kerbs of mud stops, rounded or chamfered on edges type B1 (1:2:4) using 12.50 mm graded aggregate including dismantling of existing PCC complete all as specified and directed.
2
-
-
... More
Material and labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
10
-
-
... More
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
1
-
-
... More
Supply and fixing of 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed .
30
-
-
... More
Supply and fixing of 200mm long aluminium anodised barrel tower bolts of extruded section complete as specified and directed.
30
-
-
... More
Supply and fixing of 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete as specified and directed.
15
-
-
... More
Supply and fixing of 150 mm helical door spring to mild steel chowkhats or in wooden frame through welding or screws, complete as specified and directed.
3
-
-
... More
Supply and fixing in repair of 150 mm helical door spring to mild steel chowkhats or in wooden frame through welding or screws, complete as specified and directed.
2
-
-
... More
Supply and fixing in repair of sheet glass 3mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed.
30
-
-
... More
Supply and fixing in repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed.
30
-
-
... More
Supply and fixing of 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.complete as specified and directed.
8
-
-
... More
Supply and fixing of sheet glass 3mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed.
3
-
-
... More
Supply and fixing of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed.
3
-
-
... More
Supply and fixing in repair of mild steel 32mm dia, 1.6mm thick, PVC coated, fancy type, heavy duty wood grain shade drapery rod, including lattoos, brackets & wall end sockets, complete all as specified and as directed.
110
-
-
... More
Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, ISI marked for kitchen with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and directed.
2
-
-
... More
Material and labour for repair to steel rolling shutter (chain pulley type) not exc 12 sqm each in area as clear opening by replacing unserviceable parts such as pulley, springs, hood cover, anchoring rod, ball bearings, shaft, etc. including necessary welding, cleaning, greasing, oiling, making in servicable condition as required, one coat of red oxide zinc chrome primer including taking down rolling shutter and re-erecting/refixing the the rolling shutter in same location complete all as specified and directed.
3
-
-
... More
Material and labour for repair to steel rolling shutter (gear operated type) area exc 12 Sqm but not exc 25 sqm each as clear opening by replacing unserviceable parts such as gear box, springs, hood cover, anchoring rod, ball bearings, shaft, etc. including necessary welding, cleaning, greasing, oiling, making in servicable condition as required, one coat of red oxide zinc chrome primer including taking down rolling shutter and re-erecting/refixing the the rolling shutter in same location complete all as specified and directed.
2
-
-
... More
Material and labour for running welding in repairs thickness of metal to be welded not exceeding 6 mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, in the case of metal exceeding 3 mm thick complete all as specified and as directed.
10
-
-
... More
Supply and fixing in repair of helical springs of size not exceeding 50 Cm long as required for rolling shutters etc all as specified and directed.
1
-
-
... More
Supply and fixing in repair of helical springs of size exceeding 50 Cm long as required for rolling shutters etc all as specified and directed.
1
-
-
... More
Supply and fixing in repair of mild steel gear box including gear wheels of rolling shutter machine cut with vertical MS shaft 25mm bore heavy grade complete all as specified and dircted.
2
-
-
... More
Supply and fixing in repair of steel rolling shutters, gear operated type with bevel gear box and crank handle with ball bearing , and thickness of laths 1.00 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type gear operated type with bevel gear box and crank handle complete complete all as specified and directed
25
-
-
... More
Supply and fixing in repair of steel rolling shutters, without ball bearing , and thickness of laths 1.00 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type gear operated type with bevel gear box and crank handle complete complete all as specified and directed
72
-
-
... More
Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete complete all as specified and directed. NOTES : - (i) The ATT work shall be carriedout through specialised agency as approved by GE in writing and chemical used shall be approved before execution of work. (ii) 5% amount of the total amount of ATT shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.
30
-
-
... More
NOTE:- Amount of credit of Rs. 98,780.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements