Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 99,800Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681935_1Tender No
GE (AF) Gurgaon No 1/GUR-65/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
S&F pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in eaves sheet/ board covering or of similar type, fixed with self tapping screws with bitumen washer including necesary mild steel flats, angles etc and scres for fixing with truss members of any material, complete in all respect as specified and directed.
34
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.
28.45
-
-
S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/ hollow section, channel or flat sections) independent fixing with welding etc. including distance pieces, cleats etc. using FE-410W (Grade E-250 quality "A") complete in all respect as specified and directed.
2085
-
-
S&F Framed work such as grills, gratings, with ornamental & intricate design etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders,framed balusters, walk ways; railings, & similar work conforming to Fe 290 GDE -E-165
2615
-
-
S&F Welded steel wire fabric supplied and fixed, complete to wood or steel menbers not exc 4.00 kg per sqm, complete all as specified and directed by Engr-in-Charge.
25
-
-
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, confirming to Fe 410-W (Gde-E-250) quality A, complete all as specified and directed by Engr-in-Charge.
110
-
-
M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge.
279
-
-
Excavation in trenches nexc 1.50m wide and n exc 1.5m deep, for foundation etc. or for shafts walls,cess pits, manholes, pier holes etc.and getting out in soft/loose soil, complete all as specified and as directed
46.65
-
-
M&L for PCC 1:4:8 type D2 in foundation using 40mm graded stone aggregate as in foundation ,mass concrete etc complete all as specified and as directed.
2.5
-
-
M&L for RCC M-25 nominal mix in footing, plinth beam,foundation,base of columns etc. basement slabs,under-reamed piles and mass concrete complete and all as specified and as directed by Engr-in charge
3.22
-
-
Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed.
2.34
-
-
Formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter etc for rough finished surfaces.
6
-
-
Formwork to sides of pillars, posts, struts, piers, columns & stanchions in Square, rectangle or polygonal any shape and not exceeding 200 mm thick shelves etc for rough finished surfaces.
20.8
-
-
S & F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping etc and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
265
-
-
- Ditto - as per item No. 16 above here-in-before but 8 mm dia as in stirrups spacers and binder etc.,
155
-
-
Dismantling of brick work or stone/ boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles, complete in all respect as specified and directed by Engineer-in-Charge.
15
-
-
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.
21.5
-
-
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching, roof levelling course, bed block for flooring, rungs, window cills etc complete all as specified and directed by Engr-in-charge
2.8
-
-
Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures)
1198
-
-
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)
388
-
-
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium Channel, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed by Engineer-in-charge.
587
-
-
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.
457
-
-
M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.(Note :- Rate included for four storey building including scaffolding and all safety measures)
410
-
-
M & L for 10mm thick rendering in CM (1:3) on brick/stone/concrete surfaces of ceiling finished the surface even & smooth without using extra cement including preparing of new plastered surface of ceiling and applying two coats of white oil bound Distemper. complete all as specified and directed by Engr-in-Charge.
40
-
-
M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. (Note:-including necessary scaffolding upto 4th Storey)
430
-
-
M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 3 mm thick (in two layers), wall care putty, complete in all respect as specified and directed.
410
-
-
M&L for preparation of plastered or unplastered decorated surfaces on ceilings by vaccum based standing machine all as specified, removal of nails etc and filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat oil bound distemper white or colured by auto roller, complete in all respect as specified and directed by Engr-in-Charge.
40
-
-
M&L for preparation of plastered or unplastered decorated surfaces of walls by vaccum based standing machine all as specified, removal of nails etc and filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil bound distemper white or colured by auto roller, complete in all respect as specified and directed by Engr-in-Charge.
110
-
-
M&L for complete removal of existing treatment from old decoratd plasterred surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty and applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion anti fungal paint 100% acrilic or approved white or colured over a coat of approved primer by auto roller, complete in all respect as specified and directed by Engr-in-Charge.
70
-
-
M&L for preparation of old decorated steel and steel based surfce of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete in all respect as specified and directed by Engr-in-Charge.
30
-
-
Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.
7.8
-
-
M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate)as in plinth protection and courtyard, finished even and smooth/fair with out using extra cement complete all as specified
72
-
-
Surface excavation, not exc 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil, complete in all respect as specified and directed.
160
-
-
M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed
10.2
-
-
M&L for 100 mm thick PCC, type D-2, 1:4:8 (using 40 mm crushed and graded stone aggregate) as in footpath, floor finished even and fair without using extra cement and making impressions of expanded metal whilst the concrete is green, complete in all respect as specified and directed.
160
-
-
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) & remove rubbish from MoD Land, complete all as specified and directed by Engr-in-charge
121
-
-
M&L for providing 50 mm thick PCC 1:2:4, Type B-0 (using 12.5 mm Graded Stone Aggregate) mixed with water proofing compound @3% by weight of cement, as in sub floor etc., including rough top surface to receive floor finish, complete all as specified and as directed.
170
-
-
M&L for providing and laying of 40 mm thick spark proof mastick flooring with square mesh as required, confirming to IS-8374 and other relevant specification on concrete surfaces and floor surface cleaning, applying one coat fo priming bitumen primer @ 0.3 Kg/ Sqm using blown bitumen on concrete on surface before spark proof mastic flooring, complete all as specified and directed by Engr-in-Charge.
120
-
-
M&L for skid/ non skid glazed ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed by Engr-in-charge.
45
-
-
M&L for glazed ceramic colour tiles of of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.
35
-
-
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm,but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Laid on Floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.
15
-
-
Ditto as per item no above but in skirting including 10mm thick back coat in CM 1:3 complete all as specified and directed by Engr-in-charge
3
-
-
S&F 1000 ltrs rotational moulded polyethylene three layered water with EPI coated storage tanks (cylindrical vertical with closed top) hoisted and fixed with all necessary fittings in position including taking down existing water tank of 250 to 500 ltrs or removing of existing RCC old tank, complete all as specified and directed by Engr-in-charge .
2
-
-
S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other Situ-ation including taking down of old GI tubing complete all as specified and as directed.
30
-
-
S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors/walls including Taking down old GI tubing, complete all as specified and as directed.
70
-
-
S&F in repairs, 20 mm Bore gun metal Gate/Globe half turn valves with iron wheel/Lever fixed-in-repairs complete all as specified and directed by Engineer in charge.
4
-
-
S&F Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed.
6
-
-
S&F Bib Cock 15mm Bore (dia), Chromium Plated Long Body Bib Cock, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
5
-
-
S&F concealed stop valve CP 15mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed
2
-
-
S&F two way brass CP bib taps 15mm bore cast copper alloy with crutch or butterfly screwed down screwed for iron pipe or for brass ferrul and fixed in repair complete all as specified and as directed
2
-
-
S&F in repair chromium plated shower rose fancy type fixed to 15 mm bore pipe all as directed by Engr-in-Charge
1
-
-
S&F in repair Vitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed.
1
-
-
S&F in repair Brass CP towel rail 20 mm dia, including Taking down of old towel rail of any size, complete as all specified and directed.
2
-
-
S&F in repair Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (Excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, White, Closed Pattern with Recessed Bottom and Cover including SS Steel Chromium Plated Hanging Device, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.
2
-
-
S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.
2
-
-
S&F in repair Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, Chromium plated pillar tap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.
3
-
-
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engr-in-Charge.
10
-
-
M&L for replacement of 100mm CI floor/ nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge
5
-
-
S&F in repair looking mirror 600x450mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engr-in-Charge.
2
-
-
S&F Fancy type two way Pillar Taps mixer 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.
1
-
-
S&F Brass CP Health Faucet, as Approved, including Taking down unserviceable Health Fosset of any description, complete as all specified and directed.
2
-
-
Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortar up to 100 mm dia and removing to store.
12
-
-
S&F PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls/Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed.
6
-
-
S&F PVC (SWR) Bend suitable for PVC (SWR) Pipes 75mm in Bore (dia) with access door, jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
4
-
-
S&F 75 mm dia PVC (SWR) Tee with access door suitable for PVC (SWR) Pipes 75mm in Bore (dia), jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
1
-
-
S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls with oval access door
6
-
-
S&F in repair 100mm dia CI bends, diminishing pieces or tapers complete all as specified and directed.
1
-
-
S&F in repair 100 mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and directed.
1
-
-
S&F in repair stack clamp made out of GI angle and 10mm dia U bolt and nut with washer for 75 and 100 mm dia pipe complete all as specified and directed.
15
-
-
S&F for 25mm dia MS powder coated Curtain rod with decorative nobes on both the and MS bracket for fixing in the wall by drilling and fixing wooden gutties inclunding remove old rod etc. and as directed by Engr-in-charge
10
-
-
Taking dwon chowkats or frames with shutters (without taking off shutters fromk the frames) not exc 1.5 sqm each, complete in all respect as specified and directed.
13
-
-
Taking down chowkat or frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but not exc 4.00 sqm, each as doors, windows & ventilators etc. and removal from site, complete all as specified and directed by Engr-in-charge.
3
-
-
Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm and removing to store complete all as specified and as directed.
3
-
-
S&F PVC Solid moulded Architrave Door Frame of Size 50X47mm & more made out of min 5.0mm Coloured with Plastic Trim decorated PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructions complete all as specified and as directed.
10
-
-
S&F Factory Made PVC Solid moulded Architrave Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications complete all as specified and as directed.
2.8
-
-
S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed.
15
-
-
S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
2
-
-
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete.
10
-
-
S&F 150 mm long Aluminium anodised handles, cast type, complete in all respect as speicfied and directed by Engr-in-Charge.
10
-
-
S&F aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed as per specified (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as per specified. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per specified. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as specified. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per specified. (g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent.
(h) Six lever mortice lock brass on in each door.
(j) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass/Plain glass(Colour) 5mm thick.
9.1
-
-
S&F aluminium coloured power coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per specified
(b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per specified. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per specified.
(e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per specified.
(f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with "H" Section. Note : If ground requirement for sliding window/AC window contractor should provide as per direction of Engineer-in-Charge without any price adjustment.
29
-
-
S&F aluminium anodized duco grill DG 208 design as per approved pattern including aluminium U Channel etc complete all as specified and directed by Engr-in-Charge.
32
-
-
S&F Sheet Glass,4.0mm thick Ordinary, Glazing as in Window Frames fixed with Wooden oil putty/rubber beads, not exc. 0.50 Sqm in Each Pane and fixed in repairs, complete all as specified and as directed.
5
-
-
S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, etc, complete all as specified and as directed.
15
-
-
Removal of excavated soil to a distance exc 1.5 KM and not exc 5.00 KM incl loading, unloading and stacking etc complete all as specified and as directed.
50
-
-
S&F aluminium colour powder coated frame and partition for cubicals with glazed/pre laminated particle board panels fabricated including aluminium powder coated beading, rubber gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following :- (a) Aluminium colour powder coated frame section 101.60x44.45x1.93 mm fixed as specified, Make-Jindal (b)12 mm thick prelaminated particle board (pre laminated both face) exterior grade ISI Marked . (c) Tinted glass/plain glass 5mm thick Make : Saint gobain/Modigaurd. Note: If the requirement is for full glass or full prelaminated particle board panel at site the contractor shall provide the same as per direction of Engr-in-Charge.
10
-
-
S&F looking mirror full size not exc 2 sqm of selected quality glass mounted on 8 to 10 mm thick commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and as directed by Engr-in-Charge.
2
-
-
Material and Labour for brick masonry using sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed complete all as specified and as directed
1
-
-
M&L for Vitrified tiles 10 mm thick dark shed/ double charged/ ultracharged (rectangular) polished, area of each tile exc 0.42 sqm but not exc 1.00 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed by Engineer-in-Charge.
55
-
-
Dismantling of boarding, any description, fixed in any position with nails/ screws, complete all as specified and directed by Engr-in-charge
85
-
-
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & drawing complete all as specified and as directed by Engineer- in- Charge.
85
-
-
S&F 5 mm thick PVC sheet fillet of wdth 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed by Engr-in-Charge.
220
-
-
S&F 12 mm thick Toughned glass with Air Force/ 13 BRD logo of size exc 0.6 sqm but not exc 1.20 sqm etched as required in doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, with 02 Nos fancy handle of size 300 mm long, locking arrangement, complete all as specified and directed by Engr-in-Charge (Note:- Rate of etched logo with specified size is inclusive of rate quoted by the contractor).
2.6
-
-
S&F vanishing roller/ vertical blinds as required for windows/ door/ ventilator of any colour and pattern with exc 1.5 sqm but not exc 4.00 sqm each, as approved by Engr-in-Charge including connected items i.e. rod, hooks etc with complete fittings, complete all as specified and directed by Engr-in-charge.
5
-
-
S&F in repair 18/19 mm thick prelaminated particle board interior grade prelaminated one/ two side with decorative choice as required fixed with screws as in cup board shutters & shelves and pelmet boxes etc, complete all as specified and as directed by Engineer- in- Charge. Make : Duro/National/Archid Ply wood.
5
-
-
S&F Contineous (piano) hinges, mild steel powder coated of 40 mm width of flaps(when open) complete all as specified.
3
-
-
S&F in repair, 40mm Magnet catcher fixing in cup board as approved by engr-in-Charge
10
-
-
S&F brass handles fancy type projection drop (75 mm) on screwed plate, complete all as spd and directed by Engineer in Charge.
8
-
-
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete in all respect as specified and as directed by Engr-in-Charge.
60
-
-
Providing & fixing false ceiling With fully perforated 12mm thick micro tegular edged at all heights with GRG ( Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture,design and patters having moisture content lessthan 2%. Humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS 476 (part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 3000mm,cross-T of size 15x32 of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvenizing @ 80 grams per sqm)i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm lenght and L shape level adjuster of size 85x25x2mm Galvenised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work complete in all respect as per specifications, drawing and as per directions of the Engineer-in-charge
60
-
-
Demolition reinforced cement concrete in any position including cut of bars as required, complete all as specified and directed.
1.6
-
-
Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc.; complete in all respect as specifified and directed.
0.25
-
-
M&L for rough finished surfaces of concrete formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc, complete all as specified and directed by Engr-in-Charge.
2.5
-
-
M&L for 40 mm thick PCC type B-1, 1:2:4 in floor (using 20 mm crushed and grades stone aggregate) finished fair and even complete in all respect as specified and directed.
100
-
-
M&L for Chequered Cement Concrete Tiles 30 cm x 30 Cm x 25 mm thick pre-printed coloured, Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including 15mm thick Screed Bed in CM (1:4) as in Path, complete all as specified and directed by Engr-in-Charge.
30
-
-
Providing and laying heavy duty non-skid coloured digital printed parking tiles of size 400mmx400mm X 8-10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tile colour over and including 15mm thick screed bedding in CM 1:6, complete in all respect as specified and directed.
70
-
-
Taking down broken/ unserviceable RCC jali at any height and any position, complete all as specified and directed by Engr-in-charge.
15
-
-
M&L for precast cement concrete type B-0 1:2:4, using 12.5 mm graded aggregate ) louvres and Jallies , 25 mm thick including all moulding at any height of bldg set in cement sand mortar 1:2 complete all as specified and directed by Engr-in-charge. (Note : - Rate inclusive of all arrangement for scalfolding and safety precautions) .
15
-
-
S&F mild steel work conforming to Fe-310-0 or 410-0 as in bands, hold fasts, wall ties, wind ties straps, supports and stay for rain water pipes,clamps and similar articles complete all as specified and directed.
68
-
-
S&F Framed bracket of angles or tees with web & flanges cut to shape, drilled & countersunk for screw, including bending & welding angles, as necessary, gusset plates, riveting, etc., n exc 10kg each brackets, conforming to Fe 290 GDE -E-165
110
-
-
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
20
-
-
Preparing surfaces of new steel and iron work, ends of posts, backs of chowkats, etc., exc 0.1 sq. m but n exc 0.5 sq. m each of any description and girth, not otherwise described, and treated with tar or coal tar black paint, etc as directed by Engr-in-Charge.
0.2
-
-
Fixing only three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including water tank cover and three tank nipples of 20 mm nominal bore dia hoisted and fixed in position, all as specified in SSR part I, complete in all respect as specified and directed by Engr-in-Charge.
1
-
-
S&F 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
1
-
-
S&F Sink with draining board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1050x 460x bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.
1
-
-
S&F 32 mm dia waste fitting brass chromium plated for basin/ sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge.
1
-
-
Surface dressing not exceeding 15 cm deep in soft soil, complete in all respect as specified and directed by Engr-in-Charge.
15
-
-
BLANK
-
-
-
Excavation in post holes each n.exc 0.50 cum, getting out, in soft/loose soil and removing surplus soil to a distance n.exc 50m, complete all as specified and directed by Engr-in-charge.
4
-
-
M&L for reinforced cement concrete pipe 150 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.
15
-
-
M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 150mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.
15
-
-
M&L for PCC (1:2:4) Type B-2 (40mm graded aggregate) as foundation filling and mass concrete for steel post.
0.5
-
-
M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed by Engr-in-charge
0.09
-
-
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.
27
-
-
Supply only liquid water proofing compound complete all as specified and as directed by Engr-in-charge.
1
-
-
M&L preparing new surface on walls and applying 2 coats of cement paint over a coat of primer on externally walls, complete in all respect as specified and directed by Engr-in-Charge.
15
-
-
M&L for 100 mm thick PCC 1:2:4 Type B-1 (20 mm Graded Stone Aggregate) as in floor etc., including rough top surface to receive floor finish, complete all as specified and as directed.
11.6
-
-
S&F 110 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/in floors/ walls, complete in all respect as specified and directed.
3
-
-
S&F 110 mm bore of PVC (SWR) bends any radius, complete in all respect as specified and directed.
3
-
-
S&F 110 mm bore of PVC (SWR) junction single, (Single T) equal or unequal, complete in all respect as specified and directed.
1
-
-
S&F PVC (SWR) 110 mm internal bore cowl, complete in all respect as specified and directed.
1
-
-
E/M PORTION
-
-
-
Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.
108
-
-
Taking down carefully by unscrewing from the boards/outlets boxes fittings and fixtures such as switches, sockets ceiling, rose, lamp holders, tube light fittings, regulators etc and making good of disturbed surfaces
108
-
-
Taking down of existing old unserviceable submain wiring complete all as specified and as directed.
190
-
-
Taking down of existing old unserviceable distribution box including MCB/MCCB complete all as specified and as directed.
5
-
-
Taking down ceiling light fitting of any wattage of size for taking credit complete all as specified and as directed.
10
-
-
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multistranded copper conductor in and including cutting of chases to lay PVC rigid concealed conduit (medium grade), exposed to surface wherever required including conduit as specified and making good to surface by using CM 1:3, and using of wall finish paint to match the existing surface, as specified including all fittings and conduit accessories also complete including PVC insulated and unsheathed FRLSH single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one, one way switch complete all as specified and as directed by Engineer-in-charge.
Note: Cost for cutting chases and making good to match the existing surface shall be deemed to be included in the quoted rate.
-
-
-
For one light point controlled by one single pole switch.
50
-
-
For one fan/exhaust/wall mounted point controlled by one single pole switch.
10
-
-
For one 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 sqmm
14
-
-
For 3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size
14
-
-
All as per item No 140 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant low smoke ( FRLSH ) cable for 1 5 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc including taking down of old u/s wiring required complete all as specified and directed.
20
-
-
S&F in replecement of Modular switch, one way 6 Amps , 1 module as specified.
78
-
-
S&F in replecement of Modular socket, 2/3 pin 6 Amps , 2 module as specified.
66
-
-
S&F in replecement of Modular switch, one way 16 Amps , 1 module as specified.
20
-
-
S&F in replecement of Modular socket, 2/3 pin 6/16 Amps , 2 module as specified.
20
-
-
Supply & Fixing of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified & directed by Engineer - In-Charge.
30
-
-
S&F steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc complete all as specified & directed by Engineer - In-Charge.
6
-
-
Supply & fix Modular White cover plate with frame for 1/2 module complete all as specified & directed by Engineer - In-Charge.
8
-
-
Supply & fix Modular White cover plate with frame for 3 module complete all as specified & directed by Engineer - In-Charge.
12
-
-
Supply & fix Modular White cover plate with frame for 6/ 8 module complete all as specified & directed by Engineer - In-Charge.
8
-
-
S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core FRLSH Grade and one run of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ AC plug points complete all as specified and as directed.
Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.
Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes and making good to surfaces in wall/floor for passing in or through conduit.
90
-
-
S&F submain wiring with unsheathed multi-stranded FRLSH Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one run of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ AC plug points complete all as specified and as directed.
Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.
Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes and making good to surfaces in wall/floor for passing in or through conduit.
100
-
-
Supply and fix in replacement of factory made epoxy polyster powder coated distribution board SP&N 4 way fabricated from minimum 1.6 mm thick CRCA sheet with single door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 4 outgoings complete all as specified and confirming to IS: 8623 (Make: Legrand /Siemens). Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate. Make: Legrand /Siemens/Schneider.
1
-
-
Supply and fix in replacement of factory made epoxy polyster powder coated distribution board SP&N 6 way fabricated from minimum 1.6 mm thick CRCA sheet with single door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 8 outgoings complete all as specified and confirming to IS: 8623 (Make: Legrand /Siemens). Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate. Make: Legrand /Siemens/Schneider.
2
-
-
S & F MCB SPN of rating 40 Amp, 240 Volt, 10 KA, 'C' series type complete all as specified and as directed.
10
-
-
S&F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .
16
-
-
S&F in repalcement of MCB SP 40 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .
2
-
-
S&F Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole MCB of 20 Amps,complete all as specified and directed.
4
-
-
Supply and fixing LED building security light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
4
-
-
Supply and fixing LED flood light 100 watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
2
-
-
Supply , installation , testing and commissioning of diesel engine driven generating set of 40 kVA/ 32 kW capacity, 3 phase, 4 wire, 415 Volts, 1500 RPM, AC power supply with power factor 0.8 coupled directly to self excited, self regulated brushless AC alternator suitable for ambient conditions mounted on a common base plate engine model No. 3R1190ETA4GI and couple with KG make alternator water colled with standard panel accautic, encloser of base complete with relay panel for automatic starting on main failure (AMF) control panel and conforming to IS complete with integral acoustic enclosures(should have silent features) modular bolted construction & pure polyester based coating to long life in all weather conditions & for outdoor application/installation, integrated design thereby facilitating/easy handling the design of integral acoustic enclosures should be approved by National Physical laboratory as per Central Pollution Control Board(CPCB-IV) latest regulation/norms with fuel tank , battery & standard accessories & PCC platform of appropriate dimensions for acoustic enclosures 45cm above ground level as recommended by manufacturer, tools & spares as provided by Manufacturer all as specified & directed with the following specifications:
1
-
-
NOTE : (i) The capacity of Gen Set shall be net after all due de-rating factors as per relevant ISI designs. (ii) Rate offered shall be include cable and cable connections from the Generator to AMF panel with minimum 2 runs of suitable size cable.
-
-
-
(A) ENGINE : water cooler diesel engine at 1500 RPM , adequate capacity to match the 40 kVA alternator under NTP conditions with provision of 10% over load for 1 hour in every 12 hours running conforming to BS 5514/IS10001/10002. The engine shall consists of the following: (i) Fly wheel with starter ring (ii) Flexible coupling with guard (iii) Cooling Fan (iv) Radiator with guard and water pump engine mounted (v) Dynamo of suitable capacity (vi) Air Cleaner, heavy duty, dry type (vii) Fuel injection Pump. (viii) Radiator fan(Blower type) with guard (ix) Electronic/ A1 class governor (x) Fuel filter ( mounted) (xi) Lubricating oil filters(mounted) and initial filling of Engine oil (xii) Lubricating oil pump(Gear type) (xiii) 12 V self regulating alternator belt driven by engine. (xiv) Exhaust Silencer heavy duty residential type, with sound not exceeding 60 dB complete with exhaust piping of suitable dia up to and outside the building covered with asbestos impregnated rope duly cladded with aluminium sheet, adequate to create draft for safe exhaust without transferring vibration to building/ walls duly insulated with asbestos impregnated rope. (xv) Corrosion resistor/scale inhibitor (xvi) Starter 24 V DC (xvii) lubricating oil cooler (xviii) Turbo charger (xix) Instrument panel complete with : (a) Auto/Manual starting switch with duplicate key (b) Lubricating oil temperature gauge (c) Lubricating oil pressure gauge (d) Water temperature gauge (e) Battery charging ammeter (f) Battery charging indicating lamp (g) Hour meter with RPM indicator (h) Safety control against high temperature of water. (j) Safety control against low lubricating oil pressure (k) Over speed stop with double driven adaptor.
-
-
-
(B) BRUSHLESS ALTERNATOR : (i) Alternator coupled to engine indigenous make through a flexible coupling mounted on sturdy steel fabricated base frame suitable for mounting on a permanent foundation, brushless alternator shall be conforming to BS-2613 or relevant of IS-4722/IS13364. (ii) Type :- self excited, self regulated with automatic voltage regulator(iii) Rating:- 40 KVA at 0.8 PF lagging 4 pole horizontal at NTP condition. (iv) Speed:- 1500 RPM (v) System :- 415 V +/- 2.55 AC 3 phase 4 wire 50 Hz. (vi) Connection :- 4 wire star connected (vii) Enclosure :- Screen protected drip proof (IP-23) (viii) Ventilation :- Self ventilated (ix) Insulation :- Insulation class H
-
-
-
(C ) CONTROL PANEL :- The DG set control panel for mounting oil pressure, hours run, emergency stop button, RPM meters, water temperature etc which are required to check for smooth functioning of DG sets during its running period. All other safety provision shall be provided as per direction of Engineer-in-charge.
-
-
-
(D) ONE SET OF ACCESSORIES COMPRISING OF :- (a) FUEL TANK , made out of Sheet steel 16 SWG and capacity as per manufucturer norms with level indication arrangements, stop cock, , drain plug, Fuel strainer, air vent and fuel supply pump complete with piping from tank to pump and to engine including return of overflow. Fuel tank capacity as per manufacturer's norms instructions. (b) SEMI ROTARY PUMP:- Manually operated fuel pump for filling diesel in the tank of adequate capacity with inlet connection to the tank with 5 meter flexible hose pipe heavy duty for suction of diesel from barrel. (c) BATTERY :- Electric starting equipment comprising of the following : Heavy duty battery 24 plates 12 volts 150 AH (01 Nos) connected to the system fully charged including copper lead and battery terminals complete. Make: Exide/Amaron (d) Base plate :- Fabricated out of MS channel ISMC of suitable size for fixing of DG set all as specified by the manufacturer.
-
-
-
(E) AMF PANEL :- The AMF panel suitable for 40 KVA DG set factory made out of CRCA steel 16 SWG sheet floor mounting type and front operated type, totally enclosed dust, damp and vermin proof, all doors and joints will be suitably casketed to form dust and vermin proof. The panel would be powder coated minimum thickness of 50 microns, stove enameled paint finished after elaborate pre treatment to form a long lasting characteristic. The control panel will be complete in all respects with fuses, wiring and labels etc. The following will be incorporated in the AMF panel :- (a) Multi-functional meter digital (Amp meter+ volt meter +Power factor+ KW+ KWH) -01 No (b) Alternator voltage monitor- 01 No (c) Main voltage monitor -01 No ( d) Ammeter DG Analog -01 No ( e) Voltage DG Analog -01 No (f) Power fuse link -06 Nos (g) Power fuse base -06 Nos (h) Main power contactor three pole-01 No (j) DG power contactor three pole- 01 No (k) Indicator lamp(RYB) - 01 set (l) MCB (for control circuit - 10 Nos (m) Auxiliary contactor -02 Nos (n) Automatic battery 24 Volt charge -01 No (o) Terminal O/L relay -01 No (p) Terminals (for control cable) -06 Nos (q) One set of copper bus bar of suitable capacity (r) online changeover 04 pole 200 Amps , suitable for 415 volts AC Supply-02 Nos
-
-
-
Civil Works : All civil works related to foundation, installation of panel and equipments including making good of existing structure if disturbed during installation and commissioning of Gen Set (Total depth of foundation shall be min 300 mm with anti-vibration pads) deemed to be included in the quoted rate.
-
-
-
NOTE : (i) The make of Diesel engine / Alternator shall be of Kirloskar / Cummins / Crompton Greaves/Ashok Leyland. (ii) Necessary ducts and PCC cover to be provided for cable route from generator to AMF Panel and mains to AMF Panel as directed by Engineer-in-Charge. (iv) Standard tools Kit and Hand pump for filling diesel to the tank shall be supplied by the contractor. (v) Necessary testing of equipment and water load for testing before handing over the work (Phase I and Phase II test ) shall be carried out by the contractor to the entire satisfaction of the Accepting Officer or any person authorised by him and the satisfactory results shall be kept in MES records duly signed by the Contractor, Engineer-in-Charge and Testing Officer. (vi) For Phase I and Phase II test is deemed to be included in the rate quoted by the Contractor. Phase I shall be carried out by Engineer-in-charge. Phase-II shall be carried out by Engineer -in-charge, Rep of Accepting Ofiicer and Contractor. (vii) Contractor shall bring diesel for testing for 24 Hours of Test Run.
-
-
-
Earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm, 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion . (Concrete pit shall be 20 cm to 30 cm away from main pit).
4
-
-
Material and labour for XLPE insulated armoured heavy duty electric cable of size 50 sqmm 3.5 core with aluminum conductor 1100 volts grade with cross sectional area of the following with screened, pvc bedded, galvanized steel strip or wire including laying in trench, passing through pipe, bone and road and complete all as specified and directed by engr-in-charge :-
40
-
-
Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
22.5
-
-
Removing excavated material soil n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed.
3.5
-
-
Material and labour Bricks, dry, well brunt bricks laid in trenches for cable protection all as specified.
0.24
-
-
M&L for sand filling in trenches for cushioning of cable complete all as specified and directed.
2.4
-
-
S & F air termination , single pointed copper rod ,12 mm dia and 300 mm long.
14
-
-
M & L for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm dirilled and screwed including 03 nos 8mm dia 25 mm long hex head screw complete all as specified and directed.
2
-
-
M & L for lightening conductor copper strip 20 x 3.15 mm in replacement to aluminium strip drawn in GI pipe or burried in ground complete all as specified.
80
-
-
M & L for GI pipe light grade 40 mm dia for protection of lightening conductor laid in ceiling/roof or fixed to wall complete all as specified.
12
-
-
S&F 15 mm bore GI tubing, medium grade galvanized with all fitting and laid in trenches complete.
60
-
-
S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends to iron pipe and fixed to 15 mm bore pipe complete.
2
-
-
M & L for PCC 1:3:6 type C2 using 40 mm grade stone agg as in PCC block foundation complte all as specified.
0.5
-
-
Earthing complete with copper plate earth electrode 600x600x3.15 mm connected to copper strip 20x3mm size complete all as speccified and directed.
2
-
-
Material & Labour for copper brazing with copper strip/copper rod as directed by Engr in charge.
20
-
-
S & F PVC insulator with nut bolts screws for fixing of copper/aluminum/GI strip on wall/PCC blocks all as specified and directed.
30
-
-
S&F , 40/42 Watt (+/- 5%) LED recess mounting fitting(2' x 2') CRCA powder coated having polycarbonate diffuser powedered by independent electronic LED driver haing IP 20 protection,CCT 6000 K,230/240 VAC,lumen efficacy 140 lm/w including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.
10
-
-
S&F wall mounted 3-5 W indoor spot light all as specified and directed.
20
-
-
S&F 20 mm rigid concelaed PVC non mettallic conduit including junction boxes, tees, bends, elbow reducers, bell mouth tube ends including all accesssories such as couplers, lock nuts, saddle etc all for cables and wires and making good to the surfaces as specified and directed.
80
-
-
Supply, Installation ,commissioning and testing invertor type 5 star rating air cooled split unit air conditioner electric driven single phase of capacity 2 TR, Eco friendly refrigerant, hi wall split units indoor and outdoor unit complete with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with 5 star rated, auto restart facility,100% copper tube and condenser including excess copper tubing if required beyond the lenght 7.5 mtrs supplied with AC unit and PVC conduit of 15mm dia not exceeding 2.5 mtr long for water drain and making good to disturbed surface with cement mortar ratio 1:3 and testing complete all as specified and directed by Engineer - in-charge.
2
-
-
S&F nylon braided PVC pipe of size 20mm dia outer suitabel for split AC drain including fixing accessories such as claps scews rawl plugs etc complete all as specified and directed
12
-
-
S&F pre-fabricated AC stand suitable for wall mounting or floor mounting made with mild painted with synthetic enamel paint with anti vibration rubber pads including grouting in wall applicable for wall mounting type complete all as specified
2
-
-
M&L for suctionand discharge copper tubing of size 1/2 inch and 1/4 inch dia and 0.5mm thickness from indoor unit to outdoor unit of split type AC 2 TR capacity including soldering and braizing complete all as specified and directed. Note:- Suction and discharge copper tubing together wil be measured as one unit of running metre.
12
-
-
All as per item No 184 above but copper tubing size 5/8 inch and 3/8 inch dia and 0.5mm thickness
12
-
-
M&L for insulating the suction and discharge copper tubing from in door unit to outdoor unit of split type Acs of capacity 1.5/2.0 TR capacity with neoprene foam sleeves incuding sealing by applying adhesive tape fo brown or white colour to avoid minimum contact with atmosphere complete all as specified and directed
12
-
-
Supply, installation, testing and commissioning voltage stabilizer for automatic operation single phase naturally air cooled indoor type and wall mounting type and designed for input variation between 170 volts to 250 volts with output voltage stabilized at 230 vols with accuracy + 2.5% including timedelay relay and LCD display of 5 KVA rated capacity complete. Make: Blue Bird/Volina/Sinetrac or from the make specified in "list of makes'.
2
-
-
Dismantling and taking up old existing unserviceable Test Point Terminal Block made of any material complete all as specified and as directed by Engr in charge.
3
-
-
Material & Labour for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8mm dia 25 mm long hexagonal head screw and connected to copper / Aluminium / GI strip complete housed in a PVC junction box complete all as specified and as directed.
28
-
-
S&F in trenches/withwall/in door floor GI pipe medium grade ISI marked including jointing, testing and fitting (ISI Marked) etc complete all as specified fo the 40mm bore sizes:-(Excavation and earth work will be measured and paid seperataly)
200
-
-
Note :- The amount of Rs 67856/- against Schedule of Credit on Srl Page 162 shall be deducted from the total amount quoted against Sch 'A'
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%