Military Engineer Services Tender

Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete inclusive of guared bars 12mm square bar including taking down old unserviceable windows Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery (iii) Glazing, wire mesh & painting grill shall be measured & paid for separately.

Supply and fixing in repair of steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed

Supply and fixing (in repair) partly glazed aluminium alloy anodized (powder-coated) partition (Area of each panel not exceeding 1.5 Sqm each) with frame of size not less than 100 mm x 44.4 mm x 2 mm including packing with rubber gasket, standard aluminium beading around both sides including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel of aluminium partition as required complete all as specified and directed. NOTES :- 1. Glass pane shall be measured and paid separately. 2. Manufacturersof section : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or equivalent make as specified in appendix B.

Supply and fixing in repair of aluminium alloy anodized (powder-coated) door frame and partly glazed shutters with hollow aluminium anodized sections including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip, jointing cleats, rubber packing, gasket, dead lock 4 levers, 02 Nos aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and directed. Sections of frame and door shall be as follows : - (a) Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick (b) Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c) Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick. (d) Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick. (e) Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick. (f) Gauging clip weighing not less than 0.097kg/metre. NOTES: - 1. Glass pane shall be measured and paid separately. 2. Manufacturersof section : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or equivalent make as specified in appendix B.

Supply and fixing in repair of aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as specified for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, stainless steel hooks and eyes, aluminium anodized barrel tower bolts, glazing clips, joint cleats, rubber packing, gaskets etc for series-B “ Jindal” section numbers for casement window.complete all as specified and directed comprising of followings :- (a)Frame of section 101.6mm x 44.45mm x 2.10 mm thick and section for shutter 47.62 mm x 44.45 mm x1.95 mm thick. (b) Mullion 53 mm x 52 mm x 2 mm thick not less than 1.065 kg/mertre. (c) Glazing clip weighing 0.259kg/mtr. (d) Window shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98 mm and thickness 2.37mm weighing 0.875kg/mtr and 01 no for each open able leaf. NOTES : - 1. Glass pane shall be measured and paid separately. 2. Manufacturersof section : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or equivalent make as specified in appendix B.

Supply, fabricate and fixing in repair position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below,including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) NOTE: - Section No given above are of make Jindal, Contractor may use similar section of other make mentioned in relevent Appx

Supply and fixing in repair powder coated anodised aluminium grill made of mesh size 100x100mm of bar 8mm dia using U channel 25x12mm fixed to aluminium frame work complete all as specified and as directed.

Supply and fixing in repair of rubber Neoprene/ EPDM rubber gasket for aluminium door & windows complete all as specified and directed.

Supply and fixing in repair of double action floor spring hydraucally regulated made of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors complete all as specified and directed.

Supply and fixing of 5 mm thick tinted glass in square exceeding 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame with glazing clips, etc., complete all as specified and as directed.

Supply and fixing 3mm Sheet glass, ordinary quality, in squares Not exceeding 0.5 sq. m each and glazing with beads fixed with metal panel pins all as specified and directed

Supply and fixing of pressed steel frames for doors of size 165 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.

Supply and fixing of pressed steel frames for doors of size 105 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.

Material and labour 2nd class hardwood factory made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to choukats complete all as specified and directed.

Supply and fixing of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed.

Supply and fixing of factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. NOTE : - Manufacturers Test certificate to be submitted before incorporation.

Supply and fixing of factory made 35 mm thick, second class hard wood rail and style, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commrcial veneering on both faces ace, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed. NOTE : - Manufacturers Test certificate to be submitted before incorporation.

Supply and fixing of 250 mm aluminum anodised sliding door bolt with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.

Material and labour for preparing new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint (first quality) over a coat of red oxide primer complete all as specified and directed.

Material and labour for painting surfaces of wood (new) for any description not otherwise described over 10cm width of girth by applying two coats, of synthetic enamel paint over a coat of pink primer including preparation complete all as specified and directed.

Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed.

Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face including fixing in frame at site with 03 Nos SS hinges, 02 Nos aluminium tower bolt 200 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.

Matrerial and labour for plain cement concrete 1:2:4 type B-1 using 20mm mechanically graded crushed stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed.

Supply and fixing of LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.

Material and labour for plain fillets second class hardwood, square, rectangular or triangular in section exceeding 6 sq cm and not exceeding 13 sq cmclean sawn, serured with nails or brads complete all as specified and directed.

Material and labour for plain fillets second class hardwood, square, rectangular or triangular in section not exceeding 3 sq cm bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

Supply and fixing in repair continuous (Piano) hinges mild steel, bright finish or electro galvanised, width of flap 40mm complete all as specified and directed.

Supply and fixing 100mm long hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws completed as specified and directed.

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Supply and fixing of 300 mm aluminum anodised sliding door bolt with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.

Supply and fixing in repair of stainless steel butt hinges of 100mm length, cold rolled, medium weight complete all as specified and directed.

Supply and fixing of mild steel butt hinges of 75mm length, cold rolled, medium weight complete all as specified and directed.

Supply and fixing of mild steel butt hinges of 100mm length, cold rolled, medium weight complete all as specified and directed.

Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed.

Supply and fixing in repair of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed.

Supply and fixing in repair of 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed.

Supply and fixing in repair of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm all as specified and as directed.

Supply and fixing of continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 40 mm complete all as specified and as directed.

Supply and fixing in repair of 125mm double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed.

Supply and fixing in repair of mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing in repair of mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed to stone/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.

Supply and fixing of extruded aluminium alloy handles, fabricated type, anodized of size 150 mm long complete all as specified and directed.

Supply and fixing in repair of aluminium pre coated of choice colour designed type 25 mm tubular rod in curtain rod, 1.6mm fancy type including PVC golden colour brakets, latto and wall to wall socket etc., complete all as specified and directed.

Supply and fixing in repair of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm all as specified and as directed.

Supply and fixing in repair of aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Supply and fixing in repair galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed.

Material and labour for repair related to welding repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying Welder and helper for welding of n exc 6mm thick and n exc 2.5cm in length all as specified and directed

Material and labour for repair related to welding in repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying welder and helper for welding not exc 2.5cm in length thickness of welded exc 6mm and not exc 9 mm in different locations complete all as specified and directed.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply and fixing sheet glass 3mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed.

Supply and fixing in repair of sheet glass 3mm thick, ordinary quality and glazing with oil putty, in square not exceeding 0.5 Sqm each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed.

Supply and fixing in repair of 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane with oil putty or fixed with beads complete all as specified and directed.

Material and labour for resecuring without taking down chowkhats or frame not exceeding 1.5 Sqm each complete all as specified and as directed.

Material and labour for resecuring without taking down chowkhats or frame exceeding 1.50 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

Material and labour for resecuring or easing & adjusting without taking down shutters of any description not exceeding 1.0 Sqm each complete all as specified and as directed.

Material and labour for resecuring or easing & adjusting without taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.

Supply and fixing in repair of stainless steel plate rack 1mm thick of size 600 x 900 x 250 mm weighing not less than 10.0 Kg each fix with stainless steel screw to wall, complete all as specified and directed

Supply and fixing of 5 mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith corner and U channel beading of colour choice including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings etc and making good to match with existing surface effected for this area etc complete all as specified and directed.

Supply and fixing of 5 mm thick plain colour PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings etc and making good to match with existing surface effected for this area etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins pillars etc complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) including demolition of old brick /stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. NOTE : - Old serviceable brick obtained from demolition shall be reused. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.

Material and labour for brick work with sub class-"B" Bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick masonry built in cement mortar of any description etc complete all as specified and directed.

Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.

Material and labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in , set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality coloured glazed ceramic tiles 300 x 450 x 7mm to 08mm thick as in vertical surfaces in patches area not exceeding 5 Sqm, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or colour cement to match over 10 mm thick screed bed or bedding layers in CM 1:4 including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed. NOTE : - Rate will be inclusive any electrical board, fitting etc effected for removing and refixing and making good complete all as specified and directed.

Supply and fixing of false ceiling at all heights of perforated with fleece 595 mm x 595 mm x 0.5 mm TEGULAR EDGE TILES in global white powder quoted with 60-70 micron front coating and including regular 24 mm wide T-section flange colour white having rotary stitching on the main runner with web height 26 mm, exposed grid system including frame work comprises of main runner spaced at 1200 mm max (centre to centre), hangers (GI wire of 4 mm dia) to be fixed by hiliti consisting of HLS sleeve anchor fastencer of thread size 6.5 mm x 25/5 with soffit cleat made of galvinised steel of size 27 mm x 37mm x 25mm x 1.6mm and level clip in dimensions of 85mmx30mm 0.8mm at 600x1200 intervals. The last hanger at the end of each main runner shoud not be greater than 450 mm from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stiching) to be interlocked between main runner at 600 mm shall be 'T'shape section with single rotary stitching made of GS sheet and of size 15 mmx32mm and 3000mm long, crosssed runner shall be 'T' shaped with double rotary stiching made of GS sheet and size 15 mmx 32mm x 1200 mm long and perimeter wall angle shall be made from GS sheet and of size 19mm x 19mm and 3000mm long, colour white, centre to form 600 mm x 600 mm modules, cut cross tees longer than 600 mm to be supported independently, 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), complete including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified and directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc and making good to match with existing surface effected for this area etc complete all as specified and directed.

Supply and fixing of PVC false ceiling consisting of 600 mm x 600 mm, 5mm (+ 0.25) thick plain embossed PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x 1" (25 mm x 25 mm, 1 mm thick) in square pattern of grid sizes of 2' x 2' (600 mm x 600 mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc. complete as per direction of Engineer - In- Charge, Manufacturer's specification and drawing including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified and directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc and making good to match with existing surface effected for this area etc complete all as specified and directed.

Material and labour for re-securing/ adjusting existing false ceiling grid any type and making required tightning to remove sag portion/ depression in false ceiling grid including replacement of missing sections / suspenders etc complete all as specified and directed.

Supply and fixing in repair of pegs set of 6 Nos, power coated GI fixed with cadmium plated screws complete all as specified and as directed.

NOTE:- Amount of credit of Rs. 2,48,422.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.