Military Engineer Services Tender

M&L for wall care putty upto 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on wall surfaces complete all as specified & directed by Engineer-in-Charge.

M&L for priming plastered or unplastered surfaces of walls with alkiresistant priming paint by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for two coats oil emulsion distemper white or coloured by auto roller on wall surfaces complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of plastered or un plastered old decorated surfaces of ceiling by Vacuum based sanding machine all as specified, filling cracks/hole by applying wall care putty and applying one coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from old decorated plastered surfaces of ceiling by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty, complete all as specified & directed by Engineer-in-Charge.

M&L for wall care putty upto 2mm thick on ceiling as required (multi purpose mixer shall be used for uniform and proper mixing of putty) complete all as specified & directed by Engineer-in-Charge.

M&L for priming plastered or unplastered surfaces of ceiling with alkiresistant priming paint by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of distemper oil emulsion on ceiling surface by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 10 mm thick rendering in cement mortar 1:3 on fair faces of concrete/ceiling surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation for newly plastered surface of ceiling complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation of newly plastered surfaces of walls by Vacuum based sanding machine complete all as specified & directed by Engineer-in-Charge.

Supply and Fixing in repairs, Looking Mirror selected quality of size 900 mm x 600 mm x 6 mm thick, having four holes on corners fixed to walls with CP Brass screws with fancy type head top complete all as specified and directed by Engr-in-Charge.

M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge.

M&L for two coat of cement base paint on walls complete all as specified and as directed by Engineer-In-Charge.

M&L for 6mm thick Plywood 6mm thick, BWR Grade, type BB fixed with Screw including taking down old plywood of any description in the wall etc including two coat synthetic enamel paint over a coat of primer complete all as specified and as directed .

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified. Note :- Payment for providing grooves shall be measured and paid seperataly under respective item of Schedule .

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :

Removal of debris/malwa to a distance exc 10 Km but n exc 15.00 Km out side MD land and filling in low lying area complete all as specified and as directed by Engr in Charge.

Note :- 1. The preparation and painting work shall be executed by authorized applicator of paint manufacturer only. 2. Contractor shall submit the MOU letter from paint manufacturer within 15 days from commencement of work. 3. Contractor shall procure the paint after approval of make from GE in three equal parts, 1st part within 15 days of commancement and rest 2nd parts at equal intervals or earlier if required and to be kept in users costudy under intimation to Engr-in-charge as per HQ CESC policy letter No210007/131/155/E2 (Wks) Army dated 26 Apr 2020 on periodical services. 4. Periodical work shall be completed with in 7 days after handover of key of new allotted qtrs, in case of delay panality @ Rs 1000/- per day per qtrs. 5. Necessary cleaning of painting/distemper marks from floor, doors, window, cleaning of furniture and window panes, pelmet box, Pelmet box/Drapery rod is deemed to be inclusive of rate quoted by the contractor. Non cleaning of floor shall be recovered @ Rs 1000/- per qtr for the same. 6. Contractor shall procure/brought to site the sanding machine, auto roller, paint mixing machine and other specified T&P within 15 days from the date of commancement. 7. Electric meter during welcome maintenance will be born by contractor at the rate as specified in CA, initial and final meter reading shall be recorded in handing taking notes. 8. work will be strictly executed by mechinised means/ tools (spray machine) as required for smart periodical services. In case where work by mechinised means / tools is not feasiable then work can be carried out through auto roller or any other mean (As directed) after obtaining direction from Engineer-in-Charge.