Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 11,75,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Addl/aln To Bludings In Khetrapal Vihar, Jadunath Vihar
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_691843_1Tender No
80904Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
730.8
-
-
... More
S&F pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
4948.05
-
-
... More
S&F pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
2847.55
-
-
... More
S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105mm x 60mm and as required for cupboards (consisting two shutters) including 06 Nos hinges of size 75mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE complete all as specified and directed..
1341.57
-
-
... More
Note for item No 7.00 (i) : Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the disturbed surfaces complete all as specified and directed. (ii) Concrete for back filling in frame and for fixing holdfast PCC nominal mix 1:2:4 type B 0 considered in same and unit rate of hinge & PCC are included in this quoted rate. (iii) For payment purpose, area of front elevation shall be considered.
-
-
-
... More
S&F 30mm flush door shutters, solid core construction, with block board core and plywood face panels, commercial type both sides complete all as specified and directed.
2242
-
-
... More
S&F factory made 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed.
1311.7
-
-
... More
S&F factory made mild steel windows (Box Type) with side hung shutters including glazing bars to receive glass, dovetailed or welded with and including necessary welding, riveting, tower bolt, handle, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 Sheet (1/3, 2/3, 3/3) complete all as specified and directed.
1475.88
-
-
... More
S&F factory made mild steel windows (Box Type ) with side hung shutters without glazing bars but including sash bars to receive wire gauge, dovetailed or welded with and including necessary welding, riveting, tower bolt, handle, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed.
1475.88
-
-
... More
S&F factory made mild Steel ventilators with top hung shutter (Box Type) to receive glass or wire guage and steel peg stay with and including necessary welding, riveting, tower bolt, handle, holdfast & hinges complete all as specified and directed.
276.6
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
103.57
-
-
... More
M&L framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards frame and similar work con- forming to Fe.290 Gde-E-165 with and including necessary cutting and welding complete all as specified and directed.
10357
-
-
... More
M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
7225
-
-
... More
M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
4000
-
-
... More
M&L PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in steel chowkhats, hold fasts and bed blocks etc including necessary form work complete all as specified and directed.
73
-
-
... More
S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.
2580
-
-
... More
Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beading with necessary self-tapping riveting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones as directed.
830
-
-
... More
Supply and fixing acrylic frosted/figured sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beading with necessary self-tapping reviting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame and punching or drilling out old glazing pins/spring clips and providing and fixing new ones as directed.
455
-
-
... More
S&F stainless steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed.
2899
-
-
... More
S&F 250 mm long aluminum alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.
1563
-
-
... More
S&F 200mm size aluminum anodised, barrel tower bolt of extruded section complete all as specified and directed.
5046
-
-
... More
S&F extruded aluminum alloy handles 150 mm long fabricated type anodised complete all as specified and directed.
5046
-
-
... More
S&F 140mm long aluminum anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.
2397
-
-
... More
S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.
636
-
-
... More
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
141.5
-
-
... More
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
22800.64
-
-
... More
M&L for 50mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed.
2656
-
-
... More
M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed.
Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjacent tiles. This provision rate shall be included in rate quoted by the contractor.
2125.25
-
-
... More
M&L non skid coloured designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed.
Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjacent tiles. This provision rate shall be included in rate quoted by the contractor.
11417.47
-
-
... More
All as per item No.36 above but on skirting over with and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.
Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjacent tiles. This provision rate shall be included in rate quoted by the contractor.
983.58
-
-
... More
M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450mm x 300mm x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 complete all as specified and directed. Note:- Tiling work shall be done with spacer of 3 to 5 mm and using tile leveling machine for checking level of adjacent tiles. This provision rate shall be included in rate quoted by the contractor.
8274.34
-
-
... More
M&L Black granite (of any type), 20 mm thick machine cut laid over cement screed as in cooking platform and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of the Black granite stone including cutting and polishing with and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
742.5
-
-
... More
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed.
554.05
-
-
... More
M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case tread area).
1330
-
-
... More
M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed (Note : Single piece tiles will be placed on the surface of stair case riser area).
370
-
-
... More
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
2480
-
-
... More
Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas upto three storeys, RCC Water tanks and similar suspended work and making good the disturbed area in CM 1:3. and of any type and description not otherwise described for complete all as specified and directed.
103
-
-
... More
M&L RCC 1:2:4 Type-B1 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.
16
-
-
... More
S&F TMT Mild Steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and as directed.
1518
-
-
... More
Use and waste formwork of soffits of suspended slabs such as roof slab, floor slabs, landings, shelves and similar work, not exc 200mm thick (horizontal or sloping flat) rough finished surfaces of concrete complete all as specified and directed.
320
-
-
... More
Dismantling roof tiles, single layer on roofs complete all as specified & directed.
5712
-
-
... More
Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) complete all as specified & directed.
Note :-The rate quoted by the contractor shall be including of removal of mud phuska at a distance exc. 1.5km but not exc. 5.00km and depositing where directed.
571.2
-
-
... More
M&L for preparation of roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles with and including providing 50 mm thick (average) PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope as in bedding, coping and kerb complete all as specified and directed.
285.6
-
-
... More
M&L for providing 10mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30%) over slab and applying coat of epoxy primer with resin and hardner with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm and applying 2nd coat solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm over derived 1st coat complete all as specified and directed.
Make:- M/S Asian Paints Ltd., M/S STP Ltd, M/S Sika India Pvt. Ltd or equivalent in.
Note:- (a) The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the directions of Engr-in-Charge. (b) Primer shall be used as recommended by manufacturers of waterproofing coating is to be applied. The firm will give six-year warranty of their products and same shall be applied using their authorized applicant.
5712
-
-
... More
S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) while excluding fixing bolt, flushing cistern, flushing pipe and inclusive of plastic water closet seat cover and mild steel chromium plated or aluminised hinging device and complete all as specified and directed.
96
-
-
... More
S& F in repair Brass SS Jet Spray with 1 meter pvc tube and complete all as specified and directed.
96
-
-
... More
S&F as in repair vitreous China, squatting pan, Orissa Pattern, size 580 mmx 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size (P or S type) including connection to trap and to flushing pipe, anti-symphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed.
165
-
-
... More
S&F as in repairs 10 Ltr capacity PVC valve less symphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe of 32mm dia and brackets complete fixed in wall and floor to trap of WC as required complete all as specified and directed.
261
-
-
... More
S&F in repair Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded) (Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed.
261
-
-
... More
Taking up or down 15mm bore steel water GI tube / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed .
2970
-
-
... More
Supply and laying of CPVC pipe (outer dia of pipe 16mm) SDR-11 and plain CPVC SDR-11 & brass fittings (i.e. brass elbow, brass tee, male/female brass threaded adaptor and brass union) on walls / ceiling or lying in floor complete all as specified fittings & connections and MS clamps / clips and necessary screwing as required and fixed with without concealed to walls with and including making good disturbed surfaces by using white cement & cement mortar (1:4) mixed with pigment to match the existing surface complete to the entire satisfaction of Engineer-in-charge.”
2970
-
-
... More
Note for item No. 53 above:- 1. Brass fittings (i.e elbow, tee, male/female brass threaded adaptor) will be fixed where CP bib tap, CP angle cock, CP stop cock and brass union will be used for interconnecting GI and CPVC pipe.
2. Cost of brass fittings as used in this item included in the unit rate of this item and nothing extra is payable on this account.
3. CPVC pipe shall be fixed on the surface. However in certain places these pipe shall be cross through wall by cutting suitable size of hole. However unit rate of this item also includes the making good the existing surface where the old pipe has been taking down and make good with match with existing specification.
-
-
-
... More
S&F Brass Elbow for special fittings of 16mm bore CPVC pipe complete all as specified and directed
6375
-
-
... More
S&F Brass Tee for special fittings of 16mm bore CPVC pipe complete all as specified and directed
4550
-
-
... More
Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed complete all as specified and directed.
5824
-
-
... More
S&F 20 mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.
4366
-
-
... More
Re-fixing old 20mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as required in new or old position and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.
Note : Old pipe retrieved vide item No 57 shall be reused in the work and cost of new fittings as required is include in the quoted rates against this item.
1458
-
-
... More
Dismantling water tank, open or closed, in position and removing to store of capacity exceeding 500 liters but not exceeding 1000 Ltrs complete all as specified and directed.
261
-
-
... More
S&F as in repair 15mm dia CP angle valves complete all as specified and directed.
1305
-
-
... More
S&F Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed.
Make : Cat No. MQT-519KN of ESSCO Jaquar or equaivalent Prayag / Somany
261
-
-
... More
S&F CP Central Hole Basin Mixer with ‘poup waste with 450 mm long braided hoses complete all as specified and directed. Make : Jaquar or equivalent in Prayag / Somany
261
-
-
... More
S&F CP Sink Mixer with Swinging Casted Spout with Aerator complete all as specified and directed. Make : Jaquar or equivalent Prayag / Somany Note:- Cost of taking down of existing bib taps included in the unit rate of this item and nothing extra is payable on this account. However unserviceable bib taps shall be considered in the schedule of credit.
261
-
-
... More
S&F as in repair 15 mm bib tap (fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Make : jaguar or equivalent Prayag / Somany
783
-
-
... More
S&F as in repair 15 mm bib tap two way (fancy type), wall flange, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Make : jaguar or equivalent Prayag / Somany
96
-
-
... More
S&F in repair of 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
522
-
-
... More
S&F CP soap dish holder fixed to plugs with chromium plated brass screws complete all as specified and directed.
261
-
-
... More
S&F in repair chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed.
261
-
-
... More
S&F stainless steel peg set of six heavy weights complete all as specified and directed.
522
-
-
... More
S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.
1305
-
-
... More
S&F 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
261
-
-
... More
S&F chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with screws complete all as specified and directed.
261
-
-
... More
S&F superior quality SS Curtain rod, 20mm dia and including SS bracket 2 Nos of each opening and fancy type SS side knob of required shape and size 2 Nos of each opening as approved by GE and complete all as specified and directed.
3350
-
-
... More
S&F as in repair single/multi-PVC (SWR) floor trap 75mm dia, plain with grating including joining to waste pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed.
585
-
-
... More
Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed.
4300
-
-
... More
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors including necessary MS clamps complete all as specified and directed.
3000
-
-
... More
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors including necessary MS clamps complete all as specified and directed.
1300
-
-
... More
S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.
109
-
-
... More
S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.
524
-
-
... More
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.
261
-
-
... More
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.
261
-
-
... More
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.
261
-
-
... More
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
263
-
-
... More
M & L for Brick work with Fly Ash Bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete and all as specified and directed.
240
-
-
... More
M & L for Brick work of Fly Ash Bricks old size, straight or curved on plan to any in half brick thick walls, built in cement mortar 1:4 complete and all as specified and directed.
830
-
-
... More
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed.
57323
-
-
... More
M&L rendering 10 mm thick in CM 1:6 on fair face of brick /concrete surfaces of any description and finishing the surfaces even and smooth without using extra cement complete with complete all as specified and directed.
33450
-
-
... More
M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of complete all as specified and directed.
25350
-
-
... More
M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of with and including complete removal of existing treatment of any layer of wall by sanding with internal dust extraction system for clean environment and complete all as specified and directed.
33150
-
-
... More
M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash on undecorated surface complete all as specified and directed.
8100
-
-
... More
M&L preparing old plastered or unplastered surfaces of walls and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of wall complete all as specified and directed.
6120
-
-
... More
M&L for rendering 5mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed.
6790
-
-
... More
M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on undecorated surface complete all as specified and directed.
6790
-
-
... More
M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of ceiling surfaces complete all as specified and directed.
9780
-
-
... More
M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed.
Note :- Water proofing compound shall be measured and paid separately.
20830
-
-
... More
Supply only liquid water proofing compound.
564
-
-
... More
M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of acrylic smooth exterior paint over and including one coat of exterior wall primer as approved by Manufacture complete all as specified and directed.
20830
-
-
... More
M&L for Complete removal of existing treatment by sanding with internal dust extraction system for clean environment, washing down and stopping of distempered and painted surfaces and applying two coats of acrylic smooth exterior paint over and including one coat of exterior wall primer as approved by Manufacture complete all as specified and directed.
16760
-
-
... More
S&F rotational moulded polythene water storage tank, 3 Layer 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.
261
-
-
... More
S&F 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms.) complete all as specified and directed.
261
-
-
... More
S&F as in repairs 20mm bore dia nipple suitable for HDPE water tank (Min weight 20mm-45gms) fixed complete all as specified and directed.
522
-
-
... More
M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
878
-
-
... More
M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers all as specified and directed.
26
-
-
... More
S&F as in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including PTMT waste coupling & waste pipe 900mm long complete all as specified and directed.
261
-
-
... More
S&F Kitchen rack Overall size 750mm x 600mm x 250xmm complete all as specified and directed.
261
-
-
... More
S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed.
261
-
-
... More
M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed: -
(i) Demolition of PCC in Sunken portion/floor and cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including S&F in repair 40mm dia, 450mm long medium grade spout pipe and cutting holes in bricks or RCC wall for spout.
(ii) Rendering of uneven surfaces at bottom and sides up to floor level with 15mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by weight of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out.
(iii) All junctions’ points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or equivalent make in Fosroc / Thremax as approved by GE.
210
-
-
... More
(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.
(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or or equivalent make in Fosroc / Thremax as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcement: Sika Fab-1 or or equivalent make in Fosroc / Thremax as approved by GE over base coat as per manufacturer’s instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion.
(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and injunctions sloping towards spout.
(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint.
(viii) The sunken floor shall be filled with lean concrete 1:5:10 typr E2 (40mm graded stone aggregate).
Note:- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorized applicators of chemicals. Cost of testing and all M&L is included in the rates quoted above
(ii) For payment purpose, the plan area of sunken floor shall be measured.
-
-
-
... More
Cutting holes into or through cement concrete slabs and cutting through reinforcement chajjas, etc reinforced or otherwise surfical area n.exc 100 sqcm as directed to insert angle iron for holding chajjas / coller platforms as required complete all as specified and directed.
15708
-
-
... More
S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated), for cooler stand, chajjas complete all as specified and directed.
6525
-
-
... More
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and in chajjas, fixed with self-tapping screws complete all as specified and directed.
1200
-
-
... More
S&F rolled mild steel framed work as in doors or gates of angle or other section conforming to FE-410-W (Gde-E-250) Quality A, with gusset plates, rails braces, etc complete drilled for fixing of sheets and including steel sheeting or other covering and hanging and fixing complete as in garage door and roof access door complete all as specified and directed.
1500
-
-
... More
Providing and Erecting steel props (upto Full Height, braced at center, resting on wedge and block to support the structure provisionally during repair work and maintaining them in position till required and complete all as specified and directed.
2449.43
-
-
... More
Chipping of loose/ damaged /cracked / previously repaired / delaminated or weak concrete by chiseling to expose the sound core concrete where ever required and to expose rusted reinforcement up to depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and directed.
2449.43
-
-
... More
Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using product as approved by GE, with density 1.01 Kg/ltr at 30 degree Celsius and consumption: 0.2 Kg/Sqm/coat complete all as specified and directed.
Note: The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar).
489.89
-
-
... More
Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption: 3.75 kg/Sqm for two coats and Product requirements: carbonation resistance: 2 mm of chemical compound as approved by GE corresponds to 20 mm thick of normal mortar, bond strength 1N / Sqmm according to ASTM C 882-78 complete all as specified and directed.
Note: The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar)
489.89
-
-
... More
Providing extra reinforcement with TMT bars as per site design requirement including straightening, cutting, bending, placing in position ,binding with GI wire of 18 gauge etc complete in all respects .Additional reinforcement with adequate lap length & rings at required spacing shall be tied with existing reinforcement using binding wire or welded complete as per site requirement and directions.
1.5
-
-
... More
Providing and fixing rebar of required length 160 mm & diameter 16mm with Epoxy Resin wherever required in RCC members including power drilling, cleaning of holes by air pressure, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete as per site requirement and directions.
452
-
-
... More
Providing and fixing rebar of required length 200 mm & diameter 20mm with Epoxy Resin wherever required in RCC members including power drilling, cleaning of holes by air pressures, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete as per site requirement and directions.
315
-
-
... More
Providing and fixing shear connectors of 16 mm dia TOR steel upto 160 mm Length Epoxy Resin RCC Members including power Drilling, cleaning of holes, insertion of epoxy, placing shear connectors in position to ensure the bond as per manufacturer recommendation complete as per site requirement and directions.
452
-
-
... More
M&L for Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including preparation of surface thoroughly with brush and cleaning complete where ever required with using Product as approved by GE with Consumption: 0.4 kg/Sqm and Product requirements: Complies with ASTM C 881-78, Type II Grade 2 Class B+C complete all as specified and directed.
2449.43
-
-
... More
Providing and fixing water tight centering & shuttering including bolting, strutting, propping etc. including removal of form work from column, beam, slab etc. complete as per site requirement complete all as specified and directed.
2449.49
-
-
... More
Supply and apply a ready to use non shrink, cementitious free flow micro-concrete (100 mm) using Product: as approved by GE, Product requirements: compressive strength 60 N/Sqmm (28 days) according to ASTM C 1107-99 complete all as specified and directed.
21
-
-
... More
M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fiber reinforced thixotropic cement mortar as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed .
1950.53
-
-
... More
M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture as per manufacturer's instructions as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. The gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions and directed.
1950.53
-
-
... More
M&L for providing and fixing 12-16mm dia injection ports non-returnable nozzle by drilling, cleaning and sealing holes 50-75 mm deep with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents as approved by GE as in beams, columns, slab and parapets as per the technical specifications and manufacturer's instructions complete all as specified and directed.
810
-
-
... More
M&L for grouting by nozzles with low viscous moisture insensitive, High strength, epoxy resin grout as approved by GE with pressure not exceeding 2-3 Kgf/Sqcm till the nozzle refuses to take further grout including cutting extra length of the nozzle after the grout hardens and finishes as per the technical specifications and manufacturer's instructions complete all as specified and directed.
810
-
-
... More
Making 'V' Groove of 3mm wide and 3mm deep over crack line by electrically operated grinder with diamond concrete saw blade and cleaning it by Air Blower as directed.
13.9
-
-
... More
Supply and apply of rust non shrink repair mortar for nonmoving cracks in plaster and walls Product Consumption: 25 RMT/Kg for crack size of 6mm x 6mm Density: 0.85 Kg/l at 27°C etc. complete all as specified and directed.
4632
-
-
... More
Supply and Apply of ready to use water resistant White Cement Based Finishing /smoothing material in 1.5 mm thickness for indoor and outdoor plastered surfaces. Product Coverage :1.2 Kg powder /Sqm/mm thickness System Requirement: tensile Adhesion 1.0 N/mm2 at 28 days (According to EN1348) water capillary Absorption 0.8 ml at 24 Hrs as per Karsten Tube Test, Water Retentivity 98% (according to EN 196-3)
2865.84
-
-
... More
Chipping of unsound weak concrete /cover of reinforcement over slab, columns and walls or as per site requirement by chiseling maximum upto 40 mm depth and disposal of malwa from site as per instructions.
2851.94
-
-
... More
Supply and Apply a glass fiber reinforced acrylic modified Cementitious coating system
Base coat : Consumption Base Coat: 1.5 Kg/ m2
Reinforcement Top Coat: Consumption of Top Coat: 1.5Kg/ m2
System requirements: Density 2.00 Kg/Ltr
Compressive Strength: 20 N/mm2 , bond Strength 2.00 N/mm2 , approve for potable water contact
2851.94
-
-
... More
Supply and Apply a epoxy resin based solvent free bond coat Product Consumption: 0.4 Kg/m2
Product Requirements: Comlies with ASTM C 881 Type II Grade 2 Class B+C
2851.94
-
-
... More
Supply and Apply a pre Batched one component polymer modified cementitious patch repair mortar for a thickness of 20 mm or as directed by Engr-In-Charge Product Yield: Approx: 0.84 ltr/Kg
System Requirements: compressive strength =50 N/mm2 (28 days) according to ASTM C 109 ;flexural = 3 N/mm2 (7 days) according to ASTM C 293-79
2851.94
-
-
... More
Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC column, chajjas, slabs, Beams, Lintels etc. removing all loose rust/scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical ( mate pidilite) and tide reinforcement bars/IRC fabric 50mmx50mmx12 gauge if required to reinforcement concrete bond primer to exposed surfaces and applying cement mortar 1:3:4 with MPC ( one part cement 3 part sand and 1 part 6mm course aggregate) 2 and average thickness note less than 20mm including IRC 50mmx50mmx12mm gauge or reinforcement bars in the removing debris all as specified and directed by GE
Note:- The rate quoted by contractor shall be included for necessary scaffolding required for the work. Nothing extra shall be paid on this account
5410
-
-
... More
M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded graded stone aggregate) in foundations, filling and mass concrete and in sub base of flooring/ hard standing complete all as specified and directed
3098
-
-
... More
Providing and laying 60 mm thick factory made chamfered edges cement concrete paver block (Rubber Moulded) of M-30 grade with approved colour ,design and patter as in footpath, park ,lawn, driveway, or light traffic parking, etc of required strength thickness and size made by table vibratory method using PU mould laid in required color and pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding / laying of interlocking paver blocks into the sand beddings layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting the paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
1550
-
-
... More
M&L Chequered cement concrete tiles 20 cm X20 cm X 25 mm thick over 15 mm thick screed bed of CM 1:6 in floors, set, jointed and pointed in neat cement slurry with gray cement and pigment and complete all as specified and directed
1550
-
-
... More
M&L Pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate) kerb Stone exc. 10cm in width and, setting in CM 1:4 and complete all as specified and directed.
28
-
-
... More
Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed.
180
-
-
... More
Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 200mm dia complete all as specified and directed.
185
-
-
... More
S&F RCC pipe 150mm dia class NP-2 laid to slope in trenches jointed and tested complete with collars complete all as specified and directed.
180
-
-
... More
S&F RCC pipe 200mm dia class NP-2 laid to slope in trenches jointed and tested complete with collars complete all as specified and directed.
185
-
-
... More
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.
180
-
-
... More
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe complete all as specified and directed.
185
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
133
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
101
-
-
... More
Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
32
-
-
... More
M&L for cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete and in sub base of flooring/ hard standing complete all as specified and directed
2.8
-
-
... More
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete all as specified and directed.
1.3
-
-
... More
M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square/ rectangular/ circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:6 including necessary use and waste of formwork and demolition of existing RCC cover slabs complete all as specified and directed.
4.7
-
-
... More
M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
785
-
-
... More
Taking down copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. Note: - Cost of cutting/chasing in brick/stone masonry included in the unit rate of this item and nothing extra is payable on this account.
8703
-
-
... More
Taking down ceiling fan/exhaust fan of any sweep, sealing cable end, dismantling blades and removing fan and blades to store, removing regulator, and disconnecting electric connection from ceiling rose etc. and deposit to MES store yard of AGE E/M GE West Hisar complete all as specified and directed
816
-
-
... More
Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
3360
-
-
... More
M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid nonmetallic conduit of dia not less than 20mm dia or suitable size medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type modular pressed steel box covered with modular cover plate and frame for housing switch, socket , fan regulators etc complete, all as specified & directed. (Note: - Switches, sockets etc shall be measured and paid for separately under respective items of BoQ' ).
4482
-
-
... More
All as per item No 155 above but ceiling fan /exhaust fan point controlled by one Number one way switch.
1320
-
-
... More
All as per item No 155 above but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.
1017
-
-
... More
All as per item No 155 above but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.
756
-
-
... More
All as per item No 154 above but for one bell/buzzer point controlled by one bell push
261
-
-
... More
All as per item No 155 above but for One Light point controlled by two, two-way switches with cables 1.5sqm size
84
-
-
... More
All as per item No 155 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one no, one way switch on independent board
783
-
-
... More
S&F in repair modular type switch 1-way 6Amp, 230Volts 1 module complete all as specified and directed
7575
-
-
... More
S&F in repair modular type switch 1-way 16Amp, 230Volts 2 module complete all as specified and directed
783
-
-
... More
S&F in repair modular type switch 2-way 6amp, 230Volts 1 module complete all as specified and directed
168
-
-
... More
S&F in repair modular type bell push, 5 Amp 240 Volts complete all as specified and directed.
261
-
-
... More
S&F in repair modular type socket 6Amp - 5 pin combined 2 module 230 volts AC complete all as specified and directed
1773
-
-
... More
S&F in repair modular type socket 6Amp/16 Amp - 6 pin combined 2 module 230 volts AC complete all as specified and directed
783
-
-
... More
S&F in repair modular type Ceiling fan regulator 2 module electronic step type of suitable wattage (minimum 120 Watt), 230V suitable for 1200/1400 mm BLDC/Normal ceiling fan etc. complete all as specified and directed
756
-
-
... More
S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 6 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including accessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishing the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge.
Note:- Two lengths of 6 Sqmm cable, one length of 6 Sqmm cable and one length of PVC conduit will be measured as one length.
3360
-
-
... More
S&F in repair Modular ceiling rose surface Bakelite 65mm x 50mm, 3 terminals with back plate etc. complete all as specified and directed.
2061
-
-
... More
S&F in repair Bell ding dong type, AC, 230 Volts, single pole. complete all as specified and directed.
261
-
-
... More
S&F in repair sheet metal enclosure distribution board SP&N, 08 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, complete all as specified & directed.
261
-
-
... More
S&F in repair of MCB, Single Pole Rated Capacity 06 to 32 Amps, 240 Volt Breaking Capacity 10 KA, 'C' Curve complete all as specified and directed. Note:- (i) DB catered separate item under this schedule for payment purpose.
(ii) Make of the MCB shall be same of the DB
1566
-
-
... More
S&F in repair of MCB, single pole and neutral rated capacity 32 amp, 240 volt breaking capacity 10 kA,' C' curve complete all as specified and directed. Note:- (i) DB catered separate item under this schedule for payment purpose.
(ii) Make of the MCB shall be same of the DB
261
-
-
... More
M&L Earthing in replacement complete with galvanized mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to earthing test point all as specified and testing on completion including provision of earth wire protected by galvanised iron 15 mm bore medium grade pipe with all fittings from the earth electrode fixed along pole with and including 25 x 6mm flat
84
-
-
... More
iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth electrode to bottom of the earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm x 300 mm (inner) and 250 mm deep including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel, CI frame etc complete all as specified and directed. Note:
(i) The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.50 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover. Reinforcement in cover shall be of 8mm dia TMT bars laid @150mm c/c both ways.
(ii) Item includes the cost of GI pipe for protection of earth wire including earth wire up to 7.5 Metre.
(iii) Any variation of GI pipe and GI wire below or above 7.5 metre shall be adjusted through deviation.
(iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides.
-
-
-
... More
S&F in repair of wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminum housing, high transmissibility diffuser, high lumen output box type fitting, 230 volts and integrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065 ALI or its equivalent in Philips, Havells.
1539
-
-
... More
S&F in repair of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Make: Cat Part No LTTB2F10WLEDEW BATTEN of C&S equivalent of makes as mentioned in Appx 'B' list of makes.
261
-
-
... More
S&F in repair of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
42
-
-
... More
Supply and fix ceiling fans complete with blades, down rods, remote control unit and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE and Five star rated with brushless with direct current (BLDC) with remote control unit complete all as specified and directed.
243
-
-
... More
Supply and fixing exhaust fan, made out of sturdy Engineering Plastic AC single phase, 230 Volts of size 250 mm sweep with blades, frame and louvers complete all as specified and as directed.
261
-
-
... More
Supply and fixing in repairs decorative wall light, stainless steel rust free fixture with white glass diffuser including 10 watt capacity minimum LED filament lamp complete all as specified and directed. Make : Havells Voila wall Light or equivalent in makes as specified in Appx ‘B’ of Particular specification.
756
-
-
... More
S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro.
84
-
-
... More
Supply, fixing and testing in replacement of factory made sheet metal enclosure size of 900mm x 900mm x 200mm, powder coated, indoor type suitable for wall / floor mounting (incl all arrangement for fixing) made out of 2mm thick CRCA sheet having independent compartments suitable for incomer MCB, refixing of 06 Nos x Single Phase energy meter and S&F outgoing 06 Nos x MCB SPN and one set of indicator lamp,
39
-
-
... More
provided with front hinged shutter with lockable arrangement and clear glass to visualize the meter reading without opening the compartment with sufficient working space, prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of size 6 sqmm from bus bar to each meter compartment (for Phase, neutral and earth wire) and outgoing connections from meter to respective outgoing MCB duly crimped with copper thimbles complete all as specified and directed and consisting of following :- (i) Bus bar for 3 Phase system of 4 x 200 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front openable shutter - 01 Set.
(ii) MCB 4 Pole 415 Volts, 63 Amps 10kA - 01 No
(iii) MCB SPN 25 Amps 10 KA 'C' curve - 07 Nos
(06 for Qtrs and 01 for staircase and Security Light)
(iv) Indicators lamps LED in Red/Yellow/Blue colour- 01 Set of three
Note :- The quoted rates deemed to be inclusive of removing the serviceable energy meter from old panel and refixing complete.
-
-
-
... More
Supply, fixing and testing in replacement of factory made sheet metal enclosure size of 1200mm x 900mm x 200mm, powder coated, indoor type suitable for wall / floor mounting (incl all arrangement for fixing) made out of 2mm thick CRCA sheet having independent compartments suitable for incomer MCCB, refixing of 09 Nos x Single Phase energy meter and S&F outgoing 09 Nos x MCB SPN and one set of indicator lamp, provided with front hinged shutter with lockable arrangement and clear glass to visualize the meter reading without opening the compartment with sufficient working space, prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of size 6 sqmm from bus bar to each meter compartment (for Phase, neutral and earth wire) and outgoing connections from meter to respective outgoing MCB duly crimped with copper thimbles complete all as specified and directed and consisting of following :-
3
-
-
... More
(i) Bus bar for 3 Phase system of 4 x 200 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front openable shutter - 01 Set.(ii) MCB 4 Pole 415 Volts, 63 Amps 10kA - 01 No(iii) MCB SPN 25 Amps 10 KA 'C' curve - 10 Nos((06 for Qtrs and 01 for staircase and Security Light)(iv) Indicators lamps LED in Red/Yellow/Blue colour- 01 Set of three Note :- The quoted rates deemed to be inclusive of removing the serviceable energy meter from old panel and refixing complete.
-
-
-
... More
Supply and fix modular lamp holder, insulated body, with modular straight back plate suitable for batten fittings & complete all as specified & directed
1800
-
-
... More
Refixing only ceiling fan/ exhaust fan of any sweep complete with all necessary electrical connections from ceiling rose to fan, fan blades Hisar complete all as specified and as directed.
816
-
-
... More
Taking down hot water geyser of capacity 25 after disconnecting all necessary electrical/Mechanical connections from MCB Box/Switch Board/wall nut &bolts and deposit to MES store yard of AGE E/M GE Hisar complete all as specified and as directed.
261
-
-
... More
Refixing of hot water geyser of capacity 25 and connecting all necessary electrical/Mechanical connections to MCB Box/Switch Board/wall nut & bolts and collect from MES store yard of AGE E/M GE Hisar complete all as specified and as directed.
261
-
-
... More
PVC connection 450mm long with PTMT nuts at either ends suitable for inlet connection 15mm bore (for Hot water and Cold water for Geyser) complete all as specified and as directed.
522
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%