Military Engineer Services Tender

Lumpsum price worked out by the contractor for "SITE CLEARANCE, EARTH WORK & EXCAVATION" as listed in Sch 'A' Part -II above/below the lumpsum price of Rs 4304.00 as inserted by MES for Sch 'A' Part -II .

Sch'A' Part-III (Road/Path/Hardstanding)

Lumpsum price worked out by the contractor for "Road/Path/Hardstanding" as listed in Sch 'A' Part III above/below the lumpsum price of Rs 2,65,071.08 as inserted by MES for Sch 'A' Part -III.

Sch'A' Part-IV (INTERNAL WATER SUPPLY)

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Sch 'A' Part IV above/below the lumpsum price of Rs 3231.52 as inserted by MES for Sch 'A' Part -IV.

Sch'A' Part-V (SEWAGE DISPOSAL)

Lumpsum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Sch 'A' Part V above/below the lumpsum price of Rs 87,780.35 as inserted by MES for Sch 'A' Part -V.

Sch'A' Part-VI (INTERNAL ELECTRIFICATION)

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Sch 'A' Part VI above/below the lumpsum price of Rs 1,19,389.18 as inserted by MES for Sch 'A' Part -VI.

Sch'A' Part-VII (EXTERNAL ELECTRIFICATION)

Lumpsum price worked out by the contractor for "Area Drainage" as listed in Sch 'A' Part VII above/below the lumpsum price of Rs 3,08,023.34 as inserted by MES for Sch 'A' Part -VII.

Sch'A' Part-VIII (EXTERNAL WATER SUPPLY)

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Sch 'A' Part VIII above/below the lumpsum price of Rs 19,650.06 as inserted by MES for Sch 'A' Part -VIII.

Sch'A' Part-XIII (MISC)

(B/R Items)

S&F pinup board 2.0mx1.4m in dimension green colour with double sided curved astra aluminium section and matt silver anodised finished frame with premium flocked fabric cloth surface and chrome plated corners on all sides with no sharp edges complete all as specified and as directed by engineer-in-Charge

S&F for non magnetic 3.0mx1.4m doble sided chalkbaord with sliding hanging clips green/white with double sided curved astra aluminium section and matt silver anodised finished frame chrome plated corners on all sides with no sharp edges complete all as specified and as directed by engineer-in-Charge

Supply and fixing of 15 mm bore brass chromium plated pillar cock quarter turn type Central hole basin mixer with pop waste system with 450 mm long braided hoses complete all as specified an directed.

Supply and fixing 20 mm di Gun metal gate valve with wheel head,screwed both ends for pipe and fixed complete all as specified and as directed by Engineer-in-change.

(E/M Items)

Supply, installing, testing and commissioning factory made and tested LT Panel Outdoor type of size 1050 X 450 X 1200 mm ( LxWxH ), platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars TPN of capacity 200 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, and made out of 3.15 mm thick CRCA mild steel sheet and mild steel & Angle frame work of 50 X 50 X 6 mm ), front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade complete with necessary PCC 1:3:6 foundation work as directed at site. The scope of work also comprising of the following:- INSTRUMENT CHAMBER:- (a) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with in-built selector switch- 01 Set. (b) Digital Amp Meter, 96X96mm, flush type rated 0-300 A, with in-built Selector switch- 01 Set. (c) C.T's 300/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (d) Red, Yellow, Blue Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three). INCOMING SUPPLY:- (i) MCCB 250 Amps 10/16 KA , 4 Pole with Adjustable thermal & fixed magnetic release 415 volts , 50Hz,=01 No., OUTGOING SUPPLY:- (i) MCCB 63 Amps 10 KA, 4 Pole with Adjustable thermal & fixed magnetic release 415 volts, 50Hz,= 03 Nos., (ii) MCB DP 20 Amps 10 KA, 240V , 50Hz,= 02 Nos.,