Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 86,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_666576_1Bid Award Id
ViewTender No
GE/GUR-/NIT-20/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(c) Cleaning of hydraulic governer.
-
-
-
... More
(d) S&F Checking and toping up of coolant.
-
-
-
... More
(e) S&F in repair fuel filter.
-
-
-
... More
(f) S&F in repair air cleaner element.
-
-
-
... More
(g) Cleaning of radiator complete set.
-
-
-
... More
(h) Engine oil as per manufacturer specification and any other checking as per manufacturer instruction.
-
-
-
... More
All as per item No 1 (a) to 1 (h) here in before but 62.5 KVA DG Set Make - Kirloskar complete all as specified and as directed by Engr-in-charge.
3
-
-
... More
All as per item No 1 (a) to 1 (h) here in before but 20/25 KVA DG Set Make - Kirloskar complete all as specified and as directed by Engr-in-charge.
8
-
-
... More
S&F Solenoed switch suitable for upto 100 KVA DG Set complete all as specified and as directed by Engr -in-charge.
2
-
-
... More
S&F in repair ring gear of flywheel suitable for DG set upto 100 KVA complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
S&F in replacement of AVR VARIABLE SPEED DCDG suitable for DG set with input voltage range 415 Volt AC with neutral & Out put DC voltage suitable for DG set upto 100KVA complete all as specified and as directed by Engineer -in-charge.
4
-
-
... More
M&L for disconnection and opening of self starter assemlly 12/24 volt for repair from DG set upto 100 KVA and repair unserveceable part of self starter suitable size as required on site complete all as specified and directed. Note:- Rate are deemed to be include all worn out part including gear and winding complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for discaling of cooling system of DG set upto 100 KVA by radiwash with two times circulation of rediwash by means of running of engine and cleaning of fan blades, crakcase breather, radiator and its fins by means of high pressure air or water complete all as specified and as directed by Engr-in-charge.
6
-
-
... More
Supply only the following items of DG Set of various capacity complete all as specified and as directed by Engr-in-charge :-
-
-
-
... More
(a) Battery terminal, lug, bolts type suitable for heavy duty battery 12/24 V.
6
-
-
... More
(b) Battery leads for copper conductor multiwired 35 Sqmm.
8
-
-
... More
(c) Hinges for DG set door of any size, any type as required on site.
8
-
-
... More
(d) Servo cool plus Radiator coolent.
40
-
-
... More
(e) Low viscosity synthetic Engine oil 15W40.
120
-
-
... More
Dismantling existing U/S battery charger and S&F of SMPS type battery charger suitable for 12V DC with auto cut off from trickle to boost alongwith AC lead to charge the battery when DG set is not in use complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
S&F 'V' belt for fan pulley (set of 2 Nos) for DG set upto 100 KVA complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
S&F 'V' belt for alternator and water pump assembly for DG set upto 100 KVA complete all as specified and as directed by Engr-in-charge.
3
-
-
... More
S&F fuel hose pipe from fuel filter to fuel pump for DG set upto 100 KVA complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
S&F fuel pipe from fuel tank to fuel filter for DG Set upto 100 KVA complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for carrying out complete over hauling/servicing of DG set panel /AMF panel/control panel including checking and rewiring of faulty electrical circuit using 1.5 Sqmm FRLS copper conductor for DG set of any type/make /capacity and making all electric connection,including repair/replacement of Digital type display of DG set AMF panel with connecting items and testing for smooth operation complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
S&F of under/over voltage relay 3 phase 415V for DG set of capacity upto 100 KVA complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
S&F of battery voltage relay 12/24V DC complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
S&F of fuse for DG Set of capacity upto 100 KVA complete all as specified and as directed by Engr-in-charge.
6
-
-
... More
S&F in replacement of lead acid maintenance free battery 12V 130AH of existing type and size suitale for DG set complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
S&F in replacement of 63 to 160 Amps, 415V, 50 Hz, MNX Power contactor of coil voltage 240V complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
M&L for attending of any breakdown of standby power supply in any location, whenever required round the clock, rectify the fault and restore the standby supply within three hours after receipt of complaint of any nature ie engine, alternator, control panel/AMF pael etc complete all as specified and as directed by Engr-in-charge. Note- (i) The cost of replaced spare parts will be paid and measure seperatly. (ii) If complaint is not attended by contractor with in five hours the penalty of Rs 500/- per hour to be imposed and amount of penalty will be deducted from RAR. (iii) The cost of transportation (to and from) for all kind of necessary equipment /T&P shall be arranged/brought by contractor to complete the job at site or at E/M Yard and no extra cost shall be paid to the contractor to this effect. (iv) Complaint shall be lodged by telephonically so contractor to specify the telephone/mobile No who will receive the complaint round the clock.
10
-
-
... More
M&L for opening/taking out of injector of DG set of any type/capacity /make upto 100 KVA disconnection and opening of fuel injector assembly carrying complete overhauling/servicing fuel injection system with including replacement of injector repair kit including calibration of injector , checking the allignment and making proper fuel connector and testing for smooth operation complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
S&F in replacement of unsv thermostat with new thermostat alongwith complete assy for DG set commection testing complete all as specified and as directed by Engr-in-charge.
6
-
-
... More
M&L for complete overhauling/servicing of turbo charger, opening/taking out of turbo charger of DG set upto 100 KVA capacity, disconnection of air supply connection pipe etc including replacement of turbo charger repair kit, calibration testing of turbo charger system complete and re-assembling the same fitted with DG set properly in original position, checking the allignment and making all connection, testifng for smooth operation from authorised rep or service engineer from the manufacturer complete complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
S&F in replacement LED flood light 210 watt 230 V AC outdoor type with thermal management in
multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.
11
-
-
... More
S&F in replacement LED street light fitting 60 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-charge.
53
-
-
... More
S&F in replacement wheather proof PVC street light junction box of size 300x200x105mm including MCB SP 6 Amps and connecting terminals 4 way and fixing with street lights poles using necessary MS clamps, nuts, bolts, washers, lugs, for incoming and going cable etc of suitable size complete all as specified and as directed by Engr-in-charge. Note:- The rate quoted are inclusive of provision and fixing of suitable lugs and glands for cable connection
50
-
-
... More
M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
M&L for Attending Complaints by deploying sufficeient labour for rectification of leakage of UG water pipe lines of size 200 mm bore of any description such as CI/DI/GI pipe line at any location including necessary excavation, earth work, dewatering, cutting existing pipe lines including repairs with suitable flanges, Joints or any other material complete all as specified and as directed.
2
-
-
... More
All as per item No 29 herein before but of size 150mm dia pipe line.
12
-
-
... More
All as per item No 29 herein before but of size 100mm dia pipe line.
8
-
-
... More
All as per item No 29 herein before but of size 50mm dia pipe line.
4
-
-
... More
M&L for rectification of defective run lead joint by burning out lead joint in position including recovering lead and making new lead joint all as specified including bailing out water coming from defective joints by means of electric/diesel driven pump set, testing of the joint under full working pressure for the following CI/DI/GI Pipe lines complete all as specified and as directed by Engr-in-charge for the following:-
-
-
-
... More
(a) 200 mm dia.
2
-
-
... More
(b) 150mm dia.
8
-
-
... More
(c) 100 mm dia.
6
-
-
... More
M&L for rectification of defective rubber gasket flanged joints including replacing rubber gasket, bolts, nuts and washers for the following CI/MS pipe line complete all as specified and as directed by Engr-in-charge for the following:-
-
-
-
... More
a) 200 mm dia
2
-
-
... More
b) 150mm dia
8
-
-
... More
c) 100 mm dia
6
-
-
... More
M&L for attending leakage complaints of sluice valves by opening removing gland plate and pumping/taking out water from water pit and providing gland packing and refitting by replacing worn out bolts,nuts and washers complete all as specified and as directed by Engr-in-charge. Note: bolts,nuts and washers shall be provided by contractor without any cost.
4
-
-
... More
Demolition of existing valve pit chamber, M&L for masonry valve pit of size 900x900x900mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and as directed by Engr-in-charge.
3
-
-
... More
S&F CI/DI special fittings including breaking/taking out defective CI/DI special for spigot and socket end for CI mains upto 300 mm dia complete all as specified and as directed by Engr-in-charge.
60
-
-
... More
S&F in replacement cast iron flanged drilled heavy duty sluice valve with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion nuts and bolts with washers of size 80 mm bore etc complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
S&F in replacement cast iron flanged drilled heavy duty sluice valve with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion nuts and bolts with washers of size 100 mm bore etc complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
S&F in replacement cast iron flanged drilled heavy duty sluice valve with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion nuts and bolts with washers of size 150 mm bore etc complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
Taking out of sluice valve /NRV of size 80/150/100mm/200 mm from existing distribution CI /DI mains complete all as specified and as directed by Engr-in-charge.
11
-
-
... More
S&F in replacement cast iron flanged drilled heavy duty sluice valve with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion nuts and bolts with washers of size 200 mm bore etc complete all as specified and as directed by Engr-in-charge.
3
-
-
... More
Supplly and fix pig lead for jointing of CI/DI/GI pipe line complete all as specified and as directed by Engr-in-charge.
40
-
-
... More
Supplly and fix lead wool for jointing of CI/DI/GI pipe line complete all as specified and as directed by Engr-in-charge.
80
-
-
... More
Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 40mm dia bore complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 25mm dia bore complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 20 mm dia bore complete all as specified and as directed by Engr-in-charge.
8
-
-
... More
M&L for re-laying, cleaning, testing of existing CI/DI pipe line of following bore with spigot and socket end class LA complete all as specified and as directed by Engr-in-charge of following size:-
-
-
-
... More
(b) 100 mm dia.
120
-
-
... More
(c) 150 mm dia.
300
-
-
... More
(d) 200 mm dia.
100
-
-
... More
Taking down of existing GI tubing 40/50/80mm bore any type complete all as specified and as directed by Engr-in-charge.
130
-
-
... More
Taking down of existing GI tubing 25mm bore any type complete all as specified and as directed by Engr-in-charge.
120
-
-
... More
Supply laying, testing GI tubing 80mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and as directed by Engr-in-charge.
40
-
-
... More
Supply laying, testing GI tubing 50mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and as directed by Engr-in-charge.
40
-
-
... More
Supply laying, testing GI tubing 40mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and as directed by Engr-in-charge.
50
-
-
... More
Supply laying, testing GI tubing 25 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and as directed by Engr-in-charge.
110
-
-
... More
M&L for lifting and taking out the submersible pump set and motor of capacity Upto 20 HP including column pipe by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from the sump /bore well and lowering back the pump after repairing from the pump including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut bolts, washers/ packing to the existing header without any leakage complete all as specified and as directed by Engr-in-charge. Note :- Rate are deemed to be inclusive for jointing of Submersible Cable , reconnecting the delivery pipe line of submersible pump sets to water mains , testing for satisfactory running & continuous flow of water complete.
6
-
-
... More
M&L for repairs & Servicing of defective submersible pump of capacity upto 20 HP by dismantling the pump & removing unserviceable parts and assemble the pump properly after replacements of unserviceable parts complete all as specified and as directed by Engr-in-charge. Note:- (a) The rates are inclusive of transporting the pump from bore well site to repair work shop & back to site. (b) The rate are inclusive of turning / finishing work for fixing of parts properly.
6
-
-
... More
M&L for rewinding of Submersible motor of capacity upto 20 HP by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 03 Meter complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
Supply and fixing in replacement of flat copper cable 3 core 6 sqmm PVC insualted unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed by Engr-in-charge.
200
-
-
... More
Supply & fixing in replecement of coloumn pipe made out of GI pipe heavy grade 50 mm nominal bore each 3 meter length including both side flange duly welded with web complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
M&L for taking the water sample from semi under ground sump/bore well and submitted the sample of water to the Govt lab for testing of water ,Chlorine test and all chemical componants test complete all as specified and as directed by Engr-in-charge.
8
-
-
... More
M&L for rewinding of electric motor 15 HP 50 Hz 415V of mono block/centrifugal pump of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for rewinding of electric motor 10 HP 50 Hz 415V of mono block/centrifugal pump of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for rewinding of electric motor 0.5/ 1/1.5 HP 50 Hz 220V of mono block/centrifugal pump of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed by Engr-in-charge.
3
-
-
... More
M& L for complete dewatering and cleaning of underground sump of capacity 1.5 Lakh gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat white wash to wall , floor and ceiling , internal surface of reservoir where applicable complete all as specified and as directed by Engr-in-charge.
1
-
-
... More
M& L for complete dewatering and cleaning of Over head sump of capacity 0.5 Lakh gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat white wash to wall , floor and ceiling , internal surface of reservoir where applicable without disturbing regular water supply complete all as specified and as directed by Engr-in-charge.
1
-
-
... More
M& L for complete dewatering and cleaning of Over head sump of capacity 1 Lakh gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat white wash to wall , floor and ceiling , internal surface of reservoir where applicable complete all as specified and as directed by Engr-in-charge.
1
-
-
... More
Excavation in trenches not excceding 1.5m wide and not exceeding 1.5m depth in loose/soft soil and getting out soil complete all as specified and as directed by Engr-in-charge.
275
-
-
... More
Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed by Engr-in-charge.
240
-
-
... More
Removal of surplus sol to distance not exceeding 50m and depositing wgere directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.
35
-
-
... More
S&F in replacement submersible pump and motor copper winding, 12.5 HP, 130-150 mtr head, 150mm dia, 10 to 12 stages, 415V, 50 Hz 3 phase complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for Comprehensive maintenance and repair including replacement of defective parts & load testing of electric operatied crane 2 Ton capacity including cleaning of all parts, greasing & oiling for all moving parts including Runway rail, wire rope, Bridge drive wheel & Hook block complete all as specified and as directed by Engr-in-charge. Note: Man and material requierd for load testing and maints/servciing for EOT Crane shall be arrenge by contractor, No extra payment shall be given to the contractor on this account.
2
-
-
... More
M&L for repair & rewinding three phase EOT crane motor of hoist (existing size & model) including replacement of all defective parts & bearing of motor complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for Comprehensive maintenance and repair including replacement of defective parts & load testing of hand operated crane 01 Ton capacity including cleaning of all parts, greasing & oiling for all moving parts includings Runway rail, wire rope, & Hook block complete all as specified and as directed by Engr-in-charge. Note:- Man and material required for load testing shall be arrange by contractor, No extra payment shall be given to the comtractor on this account.
2
-
-
... More
Support and fixing in replacement of 415 Volts, 50HZ Power contactor up to 63 Amp, of coil voltage 240 Volts, installed at EOT crane panel complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
Supply and installation in replecement of Hot dipped Octagonal galvanized iron pole 8 mtr height, with necessary Foundation RCC 1:1:5:3 with 8Nos.16 mm dia tor bar as main bars and 8mm dia.Tor bars strips@190mm c/c as this reinforcement shall confirm to IS : 1786 latest edition.The foundation shall extend above surroundings ground/drive way level for 200 mm and have DWC 63 mm dia,PVC sleeve cast foundation for cable entry,Excavation,RCC and reinforcement etc as per manufacturer recommendation and the cost of necessary foundation , steel bars , strip as per Manufacturer instructions complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
M & L for Earthing complete with Copper earth plate electrode 60cmx60cmx3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using Copper strip 20×3mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 40 mm dia GI protection pipe light grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified and as directed by Engr-in-charge. Note : Copper strip 20x3mm upto 7.5 mtrs to be included in the quoted rate.
5
-
-
... More
Taking down Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
Supply and fixing Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
Taking down copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed by Engr-in-charge.
40
-
-
... More
Supply and fixing Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed by Engr-in-charge.
50
-
-
... More
Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled, screwed including 3 nos. 8mm dia 25mm long hex. head screw & brezing all joints complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
Taking down test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
M&L for repair and maintenance of servo controlled AC voltage stabilizer upto 450 KVA capacity 3 phase 415 volts, disconnecting from electric mains , by unscrewing the nuts bolts etc repair/maintenence by draining out the voltage stabilizer oil through the drain plug , dismantling both nut and bolt and lifting the top portion to carry out through inspection and clean the bottom portion of the voltage stabiliser tank by removing the mud and slurry and deposited material for prevention of short circuit and refixing in Original position after repair and testing complete all as specified and as directed by Engr-in-charge. Note : Additional items/Spare parts required to make serviceable, shall be measured and paid separately under respective items of BOQ.
2
-
-
... More
M&L for lifting of unserviceable servo voltage stabilizer of cap upto 450 KVA by opening of top cover and other items for checking of faults/repair and lowering / refixing the same in its original position after inspection to make it ready for transportation to carry out major repair work in workshop including transportation of unservicieable servo voltage stabilizer upto 450 KVA capacity from site location to workshop and back after repair and refixing/connection the same ( rate is deemed to be inclusive of transportation , T&P and men power ) complete all as specified and as directed by Engr-in-charge.
1
-
-
... More
Supply in replacement of Electronic sensing Control card (PCB). Suitable for Existing Make -Volina complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
Supply in replacement of PVC Connector 12 pin as per existing Make - Volina complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
Supply in replacement of Dimmer varic state unit 150 Amps for 250 KVA stablizer suitable for Existing Make complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
Supply only trigger (control) transformer with primary voltage 230 Volts and secondary voltage any desired voltage between 18 volt 500 mA suit the control cercuit of the stabilizer as per sample complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for defect rectification of LT XLPE cable 1100V grade of size 3.5x4 core 25 Sqmm to 185 Sqmm, laid in trenches by locating fault with help of electronic fault locating machine comprising of surge generator pules, ECHO fault locator with high frequency distance calculator complete all as specified and as directed by Engr-in-charge.
8
-
-
... More
M &L for cable jointing kit for 1.1 KV (Earthed) grade cable for straight through Heat shrink type complete with joining material and accessory suitable for 25 sqmm to 50 Sqmm 3.5 core XLPE armored aluminum conductor cable complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
M &L for cable jointing kit for 1.1 KV (Earthed) grade cable for straight through Heat shrink type complete with joining material and accessory suitable for 70 sqmm to 120 Sqmm 3.5 core XLPE armored aluminum conductor cable complete all as specified and as directed by Engr-in-charge.
6
-
-
... More
Material and labour for laying GI tubing of size 50 mm bore ,light grade for protection of under ground cable in trench /under road /croosing or fixed to wall /pole complete all as specified and as directed by Engr-in-charge.
25
-
-
... More
Supply and fix in repaement of flame proof cum water proof LED bulk head (circular type) light fitting of 70 watt, IP -66 protection of cast aluminium alloy material and heat and impact resistance toughen 'A' clear glass having anti corrosive epoxy powder coated finish complete with all acessories pre-wired and including connecting up with three core flexible copper conductor cable with suitable size incuing taking down old u/s flame prooflight fitting complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
Material and labour for brick masonry platform for tranformer having size 3.0 mtr x 3.0 mtr and total height 1.6 M (0.45 M below ground level including excavation and earth work, 1.15M above ground level including RCC slab 150 mm on top and refilling of sand/soil), PCC 1:4:8 type D-2 in foundation, sub class 'B' brick work in CM 1:4, 15mm thick rendering in CM 1:6 on all sides of platform upto 150 mm below ground level, supply and fixing of 02 Nos MS channels of suitable size for balancing of transformer, embedded in PCC 1:2:4 type B-1 up to 150mm thick RCC slab, including provn of stair case on one side complete all as specified and as directed by Engr-in-charge.
1
-
-
... More
M&L for danger notice plate of 1.6mm thick mild steel sheet vitreous enamelled white with letter figures and conventional skull and bones in signal red colour and fixed with MS clamp, bolt and nuts of approved size for LT 20x15cm complete all as specified and as directed by Engr-in-charge.
4
-
-
... More
S&F in replaement of aluminium thimble of suitable for 3.5/4 core 25/35 Sqmm LT XLPE cable complete all as specified and as directed by Engr-in-charge.
40
-
-
... More
S&F in replaement of aluminium thimble of suitable for 3.5/4 core 50 Sqmm LT XLPE cable complete all as specified and as directed by Engr-in-charge.
25
-
-
... More
S&F in replaement of aluminium thimble of suitable for 3.5/4 core 70 Sqmm LT XLPE cable complete all as specified and as directed by Engr-in-charge.
35
-
-
... More
S&F in replaement of aluminium thimble of suitable for 3.5/4 core 95/120 Sqmm LT XLPE cable complete all as specified and as directed by Engr-in-charge.
15
-
-
... More
S&F in replaement of aluminium thimble of suitable for 3.5/4 core 240 Sqmm LT XLPE cable complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
Excavating in post holes (or similar holes) each not exceding 0.5 cum ,geeting out, returning filling in and ramming earth or broken rubble mixed with earth around , in layesrs not excceding 25cm soft/loose soil complete all as specified and as directed by Engr-in-charge.
20
-
-
... More
M&L for cement concrete type B-1,1:2:4 (40mm graded stone aggregate) as in foundations, fillimng and mass concrete complete all as specified and as directed by Engr-in-charge.
4.32
-
-
... More
Fixing only chain link fencing including line wires,any mesh,size and type of any type of standards, rails,straining bolts etc including provision of binding wire complete all as specified and as directed by Engr-in-charge.
62
-
-
... More
Supplying only Chain link MS galvanised fencing,any size,any type (weight not exc 4kg/sqm) complete all as specified and as directed by Engr-in-charge.
62
-
-
... More
S&F 11 to 15 mm dia of shank mild steel screw bolts (machine made) with haxagonal or square heads at one end and screwed the other end, or screw both end,each scrwed and to fitted with washer and one haxagonal or square nut bolt but length exc 5cm and not exc 10cm long complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
M& L for mild steel round bar 10mm dia and over,cut tolength,bent to shape rquired,including cranking,bending spirally for hopping columns,hooping ends with binding with and including mild steel wire (annealed) not less then 09mm dia or securing with clips for Gd-I,Fe-432 (part-I) complete all as specified and as directed by Engr-in-charge.
30
-
-
... More
M&L for prepration of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engr-in-charge.
20
-
-
... More
S&F Hand rails,half round or other steel section or core for wooden hand rail straight portion,drilled ans countersunk for balusters running bars for doors balusters,nosing to steps including embeding in concret and screwing etc.Wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed ,drilling holes ,notching for wire ,etc flat iron fillets(for securing wire mesh etc) including all neccesary drilling ,bolting or riveting etc and similar work confirming to Fe-290 Grade E-165 complete all as specified and as directed by Engr-in-charge.
250
-
-
... More
Supply, installing, testing and commissioning in replacement of factory made and tested (including CPRI type tested certified panel) LT Panel board ,cubical compartmentalized , out door type double door , plate form mounted, suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated aluminium bus bars four pole installed on porcelain/SMC insulator. The panel shall be dust and vermin proof. IP-65 class protection and shell be made of 3.15 mm CRCA MS sheet, and 50x50x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front and rear opening type, with apron for cable entry closing locking arrangement including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size ( but not less than 2.5 Sqmm) complete all as specified and as directed by Engr-in-charge and comprising of the following :- (a) Incoming :-
(i) MCCB 4 pole , 200 Amps,50 Hz,415 Volts, 36 KA, - 01 Nos (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter 0-250 Amp digital type with 4 way rotary selector switch-01No
1
-
-
... More
(iv) CTs ratio 400/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three
(vi) Aluminium bus bar of rating 400A- set of four (b) Outgoing
(i) MCCB 4 pole , 100 Amps,50 Hz,415 Volts, 25 KA - 02 Nos
(ii) MCCB 4 pole , 63 Amps,50 Hz,415 Volts, 25 KA - 02 Nos
(c) Platform of Panel. Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level.
-
-
-
... More
S&F in replacement L.T. lightning arresters for outdoor use, non-liner resistor type, horn gap and choking coil, maximum working pressure 1100 volts after taking down old existing un serviceable lightning arrester etc complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
Supply and fixing in renewal of 3 pole power contactor ML-6, 40 Amps,mounted on any type/description LT panel/feeder pillar/wall after taking down old existing un serviceable contactor etc complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
Supply and fixing in renewal of 3 pole power contactor MNX-110, 63 to 110 Amps mounted on any type/description LT panel/feeder pillar/wall after taking down old existing un serviceable contactor complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for preparation, cleaning of surface and painting of old street/security light pole upto 11 mtrs long with one coat of red oxide primer and two coat synthetic enamel aluminium paints including marking of pole numbers with black colour paint complete all as specified and as directed by Engr-in-charge.
80
-
-
... More
Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as directed by Engr-in-charge. Note : Punned down thickness shall be measured and paid .
29
-
-
... More
Supply and laying un-reinforced precast concrete LV cable cover class Type I with 250 x 150 x 40 mm, complete all as specified and as directed by Engr-in-charge.
2300
-
-
... More
Supply and fix GI pipe light grade of following sizes for cable protection in trenches/ at PCC poles for loopin/ loopout of cable and cable entry at bldg/block end, complete all as specified and as directed by Engr-in-charge of the following size:-
-
-
-
... More
i) 80 mm dia.
30
-
-
... More
ii) 40 mm dia.
10
-
-
... More
Supply & install in repair testing , commissioning of feeder pillar board Kiosk type ,LT(415 Volts, 50 Hz , 3-phase, 4 wire supply) floor mounted , factory assembled, outdoor type weather and vermin proof (Protection Class IP-54) made out of 40m x 40mm x 6mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet with front hinged opening, rubber lining, locking arrangement ,powder coated externally and internally after seven tanks treatment and lifting channel, fully compartmentalized design comple Bus Bar chamber comprising 4 Nos aluminium strip bus bars air insulated and PVC sheathed capacity 400 Amps with colour coding complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M&L for cutting,clearing bushes/small plants and grass surrounding the E/M installations and removing the debris to a distance of 50m complete all as specified and as directed by Engr-in-charge.
800
-
-
... More
S&F MCCB 100 A ,3 pole ,16 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
S&F MCCB 125 A ,3 pole ,16 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed by Engr-in-charge.
5
-
-
... More
S&F MCCB 250 A ,3 pole ,16 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed by Engr-in-charge.
2
-
-
... More
M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
Supply, laying and testing in replacement cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade with following cross sectional area complete all as specified and as directed by Engr-in-charge of the following size (Note : Provision of suitable double crimpped lugs, glands and suitable size aluminium thimbles deemed to be included in quoted rates.):-
-
-
-
... More
XLPE LT Cable 3.5 core 120 Sqmm.
160
-
-
... More
XLPE LT Cable 3.5 core 50 sqmm.
120
-
-
... More
XLPE LT Cable 4 core 25 sqmm.
220
-
-
... More
Taking down the existing LT cables from trenches of any size complete all as specified and as directed by Engr-in-charge.
500
-
-
... More
Taking down and dismantling HPSV street/flood/garden light fitting with GI bracket for 70/150/250 watt capacity of any make/type from pole/GI pipe unserviceable items to be kept in safe custody and taken as credit complete all as specified and as directed by Engr-in-charge.
50
-
-
... More
Supply and Fixing in replecement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete all as specified and as directed by Engr-in-charge. Note : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor
15
-
-
... More
Supply and Fixing in replecement circular LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete all as specified and as directed by Engr-in-charge. Note : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor.
12
-
-
... More
M&L for GI bracket for street light fitting made of 40mm bore light grade GI tube bent to shape required, fixed with and including MS flat iron clamps, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete including taking down the existing bracket and refixing and connecting up the light fitting etc complete all as specified and as directed by Engr-in-charge.
20
-
-
... More
Supply and Fixing LED street light luminaire 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-charge.
30
-
-
... More
Supply and Fixing LED street light luminaire 70 Watt 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including two run PVC multi stranded copper conductor of size 1.5 Sqmm 2 core for street light fitting to junction pole box complete all as specified and as directed by Engr-in-charge.
50
-
-
... More
Supply and fixing weather proof street light junction box of size 300 x 200 x 105mm including MCB SP 6 Amps and connecting terminals 4 way and fixing with street light poles using necessary MS clamps, nuts, bolts washers, lugs for incoming and out going cables, gland for cable etc of suitable size complete all as specified and as directed by Engr-in-charge. Note : The rates quoted are inclusive of provision and fixing of suitable lugs and glands for cable connection.
55
-
-
... More
Supply and Fixing LED post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engr-in-charge.
15
-
-
... More
Supply and fixing LED Solar street light fitting 20 Watt including galvanized steel pole in built, suitable size and capacity lithium ion battery, solar panel, charge controller with dusk down sensor complete Including excavation, earth work and PCC 1:3:6 for fixing of solar light pole complete all as specified and as directed by Engr-in-charge.
10
-
-
... More
Supply and Fixing in replecement LED Decorative Garden light for 360 degree indirect light IP-65 grade of proterction with High power LED of 10 watt with resistance to impact and corrosion. Glare free and better uniformity Milky version complete all as specified and as directed by Engr-in-charge.
15
-
-
... More
M&L in replacement for sub main wiring with two single core 1.5 sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 20 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 1.5Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire, cable lugs complete all as specified and as directed by Engr-in-charge.
160
-
-
... More
S & F in replacement MCCB 4 Pole, 415 V, 630 Amps with breaking capacity 50 KA complete all as specified and as directed by Engr-in-charge.
1
-
-
... More
S & F in replacement MCCB 4 Pole, 415 V, 400 Amps with breaking capacity 50 KA complete all as specified and as directed by Engr-in-charge.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements