Military Engineer Services Tender

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing complete all as specified and directed.

S&F galvanised mild Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F galvanised mild Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs bib taps 15mm dia fency type brass Chromium Plated with long body screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

M&L for in repairs 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for in repairs 110mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 15mm bore stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair for 15 mm dia angular stop valves of chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repair vitreous china wash hand basin star white size 550mm x 400 mm including CI brackets, PTMT waste coupling,waste pipe 32 mm bore complete all as specified and directed.

S&F in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets .Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern. Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).Wash down water closet (Pedestal pattern),complete all as specified and directed.

S&F in repair for 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative board includind aluminum beading complete all as specified and directed.

S&F for stainless steel sink with out drainage board made of stainless steel 1 mm thick sheet for kitchen with waste coupling waste pipe , washer and including all necessary item including fixing to brackets and connected union to pipe complete of overall size 495 x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Plastic water closet seat cover , black, white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in repair for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and directed.

M&L for dismantling water tanks exc 250 but not exc 500 Litres, and removing to store complete all as specified and directed.

M&L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position including supply and fixing 20mm dia ball valves high pressure of PTMT withepoxy coated aluminium rod and high dencty plastic ball , tank nipple all as specified in SSR Part-I, complete all as specified and directed. Note : Water storage tank shall be White in colour.

S&F in repair Polyethylene lid for water storage tank of capacity 500 Ltrs complete all as specified and directed.

S&F in repair of 20mm dia ball valves high pressure of PTMT withepoxy coated aluminium rod and high dencty plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each and making good the disturbed surfaces complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and making good the disturbed surfaces complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

S&F for factory made 2nd hard wood 35 mm thick plain framed panelled shutter( two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (part-1) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for factory made 2nd hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc. (with out sash bars),edges or framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and directed.

S&F for framed work as in door of angle or other section with gusset plate , rails , braces, etc complete drilled for fixing of steel sheeting or other covering. Door etc, to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing including one shop coat of zink chromate primer paint confirming to F-410W GDe-250 A complete all as specified and directed.

S&F Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gaused Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) pintol hinges 12 x 75 mm - 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c. (viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) Two coat of Synthetcitc enamel paint over one coat of primer (x) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in glazed / gazed skelton shutter of window (xi) 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane fixed in glaxed / gazed skelton shutter of window. (xii) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F 200mm long aluminium, anodised, barrel tower bolts of extruded swction and fixed complete all as specified and directed.

S&F for 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and directed.

S&F Butt hinges, stainless steel medium weight 100 mm size complete all as specified and directed.

S&F for mild steel 300 mm ordinary rat tail rod pattern springs including rollers and roller plate etc complete all as specified and directed.

Dismantling of boarding with grid of any type/ size as in CB / Wardrobes/ false ceiling or fixed in any position in hardware (if any) etc complete all as specified.

S&F 18mm thick LEAD FREE PVC celuka ply of both side plain of approved colour other than white colour fixed with screws solvent cement / adhesive to make kitchen / bed rooms cabinet sides top and bottom and shelves inside the cabinets including Knobs and hinges complete as per manufacturer's specifications complete all as specified and directed.

S&F as in repair mild steel door shutter two leaves with frame of 20 gauge MS sheet (all around) and leaves of 21 gauge MS Sheet ( all as per Godraj Pettern) with three way locking arrangement with brass lock with duplicate key and CP handle including two coats of spray painting over a coat or red oxide primer complete fixed in existing cupboard fixed with necessary nuts, bolts including embedded in PCC 1:2:4 (area of opening shall be measured)complete all as specified and directed.

S&F in repair Continuous (piano hinges) 30mm width of flap Paino hinges, mild steel bright finish (width of flap 30mm) complete all as specified and directed.

M&L Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails of 2nd class hardwood of sectional area exc 13 sqcm not exceeding 25 sqcmcomplete all as specified and directed.

S & F 75mm brass handles, cast type, polished bright complete all as specified and directed.

S & F brass body ball catches with 8mm dia steel ball and striking plate including letting incomplete all as specified and directed.

S&F in repairs stainless steel grating cover 100mm dia fixed in repairs complete all as specified and directed.

S&F in repair 32mm dia brass chromium plated waste coupling for wash hand basins fixed in repair complete all as specified and directed.

S&F in repair 38mm dia brass chromium plated waste coupling for kitchen sink fixed in repair complete all as specified and directed.

Resecuring or easing & adjusting shutters of any description n exc 1 sq. m each, without taking down shutterscomplete all as specified and directed.

Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and directed.

Removing and refixing of steel door shutter exc 1.00 sqm but n exc 2.00 sqm incl cutting welding and adjusting as per opening complete all as specified and directed.

M&L for running welding in repairs thickness to metal to be welded n exc 6mm complete all as specified and directed.

Preparation of new surfaces of wooden of any description not other wise decribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed.

Preparation of new surfaces of steel any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for hacking out old broken glass exc 1.5 sq m (any thickness, size, quality or description) from metal frame including punching or drilling out glazing pins/springs clips and providing and fixing new ones complete all as specified and directed.

S&F in repair for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed.

M&L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed.

M&L Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles premium quility 7 to 8 mm thick,(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. 15mm thick screed bed in cm 1:4 complete all as specified and directed.

M&L Non Skid coloured ceramic tiles joint free premium/1st quality of same description as of floor tiles in serial item No 63 above but 100mm to 200 mm height in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles premium quility in vertical surfaces such as skirting /dados and riser to steps area of tiles 350mm x250mm x7mm/450x350x7mm thick set and jointed and pointing in white or coloured cement to match over 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate complete all as specified and directed.

M&L for Stainless steel plate rack of size 31" x 30" x 10" of load capacity not less than 30 kg including fixing with stainless stell screws including taking down of old plate rack of any description complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt,etc from PVC/RCC tanks and mouths of circulating pipe of exc 250litre and not exceeding 1000 litre capacity & writing on the tank with synthetic enamel paint not less than 70mm long and 2mm wide of words in shape like cleaned on : 15.06.2021 complete all as specified and directed. NOTE :- Unit rate shall be included to make Small fittings such as elbow, socket, reducer, tee, union etc .

Note:- Amount of credit of Rs. 54450.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17 of tender documents in pdf form which will be deducted offline while acceptance of tender.