Military Engineer Services Tender

M&L for providing cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in foundation filling and mass concrete , post holes, cills, steps; seismic and other similar bands, plinth courses, string courses, ramp, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , on roofs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc including necessary formwork complete all as specified and as directed.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates complete all as specified and as directed.

M&L for preparation of new surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specified and as directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa with hot dip alloy of 55% Al, 43.5% Zinc and 1.5% silicon and finished with resin coat on both side @ 150 gm/sqm as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and as directed.

Surface dressing upto a depth of 15 cm (on average) as in soft/loose soil complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 ( 40 mm aggregate ) as in subbase to floor complete all as specified and as directed.

Machine pressed precast concrete interlocking colour rubberised paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade finishes complete all as specified and as directed. ( Note : pattern/design to be pre approved by Engr-In-Charge).

M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and as directed.

M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.

M&L for Rendering 15mm thick in Cement Mortar 1:4 (Externally) on Fair Faces of Brick Walls finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for applying two coats of cement based paint including preparation of surfaces complete all as specified and as directed.

S&F for stainless steel Gde-304 oil and grease trap 2 mm thick of size 900 x 600 x 600 mm alongwith its connection and accessories including inlet and outlet connecting to outer manhole etc complete all as specified and directed

M&L for Anodised powder coated aluminium frame for doors, windows, ventilators and fixed type partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Note : Any type of connceted accessories is included in the quoted rate.

S&F 5.5 mm Sheet plain/tinted glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, rubber beading, glazing clips and all necessary fittings complete all as specified and as directed.

S&F 12 mm Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/aluminium of frame all as specified and directedcomplete all as specified and as directed.

S&F PVC Board Scratch and strain free (weight not less 10.5 Kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated and one side plain, 18/19mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

S&F Magnetic Door Catcher medium grade to hold approx 1000 mm opening cabinet door and Fixed-in-repairs complete all as specified and as directed.

S&F Stainless steel frog hinges suitable for kitchen cupboards 22 mm PVC Board etc for smooth movement, and Fixed-in-repairs,complete all as specified and as directed.

Supply and install, testing and commissioning of high wall split units AC all weather type indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with of capacity 1.5 Ton minimum 5 star rating and EER 3.2 complete incl fixing brackets/clamp etc complete all as specified and as directed. Make - Voltas/LG/Hitachi.

S&F Voltage stabilizer for automatic operation, single phase, naturally air cooled indoor type and designed for input variation between 150V-285 Volt with output Voltage stabilized at 230 with acccuracy of +- 2.5% and capacity of 3 KVA complete all as specified and as directed.

M&L for sub main wiring with PVC insulated, fire retardant (FR), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4 sqmm (Nominal area) drawn into new conduit of any size and type with and including one run of 2.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green coour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Conduit/ casing- caping and accessories shall be measured separately by contractor.

M&L for Regid non-metallic PVC conduit 20 mm (external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified and as directed.

S&F PVC Drain pipe of size 15 mm complete all as specified and as directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A and 240V complete all as specified and as directed.

S&F GI stand for outdoor unit complete all as specified and as directed.

S&F Desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CUM per hour (or nearest size) complete all as specified and as directed.

Supply, installation erection and testing commissioning of Galvanized steel high mast lighting system of 16 meter in two section suitable for 50 m/s wind speed ,with head frame ,winch mounting braket ,luminaries carriage suitable to install 08 nos luminaries in symmetrical arrangement along with raising lowering system comprising double drum winch 06mm dia SS wire rope ,trailing cable,connector,integral power tool motor ,manual handle,junction box,lightening finial and complete Foundation Accessories which includes , each set consists of 06 Nos. of M 30 X 850 mm bolts with minimum 8mm thick Anchor Plate minimumum 75mm dia for cable entry or as OEM recommendation. Note- The contractor shall submit the foundation drawing of 16 m high mast light vetted by any Govt Engeering college before execution of foundation work complete all as specified and as directed. Make:- BAJAJ or Equivalent out of makes spd in list of makes. Note :-High Mast Light will be inspected at factory premises in the presence of nominated officer of the Accepting Officer before disptch to the site. All the arrangements for factory inspection shall be made by contractor within the overall cost quoted and nothing extra shall be payable in this account .

S&F 200W LED Flood Lights luminaries Energy saving, envirnmental friengly, long life, exclusive innovative diecast aluminium IP 65 flood light, suitable for highlighting architechtureal façade and general purpose lighting of epoxy powder cated CRCA MS housing with epoxy power coated aluminium heat sink with system wattage with 120 degree view angle, 90 lumen/watt, luman maintenace 70% at 50000 hrs, color temperature of 5000-6500k, Color rendering and LM80 test compliance. The driver must be integral APFC and constant current type haveing THE 20% and power factor0.90 with short circuit protection, open protection, reverse polarity protection, high voltage portection complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. The LED used in fitting is of make must be of CREE/NICHIA/OSRAM/PHILIPS. Note :- (a) Make shall be Bajaj/Phillips/Havells/Crompton/Poly cab (b) Make of luminaire and driver shall be same" (c) System efficiency shall not be less than 90 lumens /watt.

S&F Twin dome LED aviation Light IP66, Color Red, Lamp Power - 17W, Weight - 3Kg, LED Number - 604, Long Life LED - 100000Hrs, 230 VAC, Illumination - Uniform 360 Degree, Body - Aluminum Alloy (LM-6), Intensity - 800 Mcr, Cover - UV Stabilizewr polycarbonate Dome complete all as specified and as directed.

Supply, installation, testing & commissioning LT Timer panel board, out-door type, suitable for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of 3 mm thick CRCA sheet outer with following items:- Busbar 4 Pole, Aluminum,150 Amps - 01 Set; 63A, FP. MCCB 25/30 KA, with spreader link - -1 No; METERING:- Digital Voltmeter range 0-500V , Ammeter range 0- 100 Amps +CT : 320/5 A -1 Set ; RYB Indicating Lamp LED type 240 V AC - 01 set ; Astronomical Timer switch -01 No; 4Pole, 63 A (AC1) contactor -01 No; MCB ,SP 6A -01 No; ON indicator -01 No; Auto mannual switch -01 No; OUTGOINGS:- MCB TPN 32A, 10 KA - 03 Nos; Reverse Forword DOL starter : 05 HP -01 No; ON indicator -01 No; 3Pole, 12 Amps contactor - 02 Nos; Push button FOR INCHING Function - 02 Nos; Selector switch ( Reverse-Forward ) -01 No;Thermal bi-metalic O/L Relay (4.5-7.5 A) -01 No; ON indicator -01 No; MCB SP 6Amps for control -01 No. complete all as specified and as directed.

M&L for PCC 1:4 :8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over above, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.Note :The contractor shall be responsible for the design of foundation and satisfactorily safe working condition for the design life of the Mast complete all as specified and as directed.

All as per item No 37 hereinbefore but as in strips.

M&L for RCC M-30 Nominal Mix (20mm graded aggregate) as in foundation,including rafts,footings,foundation including rafts,footings ,beams,plinth beams bases for columns etc basement slab under reamed piles and mass concrete complete all as specified and as directed.

Supply and laying cable XLPE insulated screened PVC bedded. Galvanized steel strip or wire armoured ,electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core, jointing testing complete all as specified and as directed. Note:1:-Colour code for cable shall be approved by GE .2:-Pre despatch inspection by rep of AO shall be carried out within overall cost quoted. 3:- Name of formation shall be printed at every 1 RM Length ofcable.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers exc 25 cm thick complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted. Note : Punned down thickness shall be measured and paid .

M&L for sub class ‘B’ bricks old size laid flat dry in trenches over cable, across the direction of cable complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level at any type of strata ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised iron strip 32×6mm as earthing strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified and as directed.

S&F MCCB 160 Amps 4 Pole breaking capacity 35/36 KA with thermal and magnetic adjustable type complete all as specified and as directed.