Military Engineer Services Tender

Material and labour for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint @1.80 lit / 10 sqm (undiluted) as per approved manufacturer's instruction over prepared and primed surface of external wall. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. MAKE : - Apex Ultima Protek Asianpaints / Nerolac excel top guard / Berger weathercoat long life 10.

Material and labour for applying two coats of oil bound emulsion distemper on prepared & primed wall ( internal) and ceiling surfaces of approved tint complete all as specified & as directed.

Material and labour for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old decorated steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for writing letters or figures (Block, Roman, Italic or Indian) on plastered surfaces with using black synthetic enamel paint on back ground and letter & numbers written with white synthetic enamel paint of 150mm hight etc complete all as specified and directed.

Taking down cement mortar or lime plaster of any description from stone or brick wall or concrete surface etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed.

Material and labour for ready mix plaster of average thickness 15mm on brick work or concrete surfaces surfaces finished even and smooth including necessary scaffolding complete as per manufacture's in instruction and as directed. Note for all painting works above: - The following measures shall be ensured by contractor before & during execution of the work - (a) All painting works shall be got executed through original material manufacturing company and their authorized applicators as approved by GE and contractor will submit MOU with manufacturing company and their authorized applicator alongwith performance gurantee. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Contractor shall submit gurantee from OEM of 07 Years for effectiveness of painting carried out by them from certified date of completion. (d) Contractor shall deposit entire quantity of material (proprietory materials) in sealed containers required for painting works covered in the work in custody of Engineer-in-Charge / rep of Engineer-in-Charge. (e) The material as required shall be issued to contractor by rep of Engineer-in-Charge on daily basis and empty containers / bags shall be deposited in the store of Engineer-in-Charge by Contractor for verification of consumption / coverage prescribed by manufacturer. (f) After completion of painting work contractor shall remove and clean all droplets / stain of paint left on the floor, glass & joinery. (g) The work shall be executed upto 12m height and cost of suitable scaffolding shall be deemed tobe included in quoted rates. (h) Sample patch of 10sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. (j) Work for item Nos 2.00, 3.00, 4.00 and 5.00 shall be carriedout by fully automatic machines. The rate is inclusive for the same.

Demolition of cement concrete (reinforced) and (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Material and labour for Reinforcement Cement Concrete (Nominal Mix) Type B0 1:2:4 (12.5 mm graded aggregate) as in chajja,fin, facia,louvrs,parapets and railing exc 60 cm in height,newel,balustrade and like including necessary welding of XPM with existing reinforcement if required at site also include necessary form work complete all as specified and directed.

Material and labour for reinforcement TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping staps/lintals and including mild steel wire not less than 0.9mm dia or securing with clips complete all as spd and directed.

NOTE:- Amount of credit of Rs. 1300.00 for retrieved materials is mentioned in Schedule of Credit Page No 26 of tender documents in pdf form which will be deducted offline while acceptance of tender.