Military Engineer Services Tender

M&L for pin type porcelain vitreous white/brown/green insulator including one galvanized mild steel spindle and two galvanized iron washer and nut complete suitable for 1100 V grade 100mm height 65mm dia complete all as specified and directed

M&L for shackle type porcelain vitreous, white brown or green insulator for working pressure 1.1 kv of size 75 mm height and 90 mm dia including galvanized mild steel straps of section 31 x 3 mm size 12 mm dia bolt nut and washers complete all as specified and directed .

M&L for Cross arms bracing supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shapes or sizes as indicated or directed and inclusive of one primer coat,one under coat and one finishing coat of paint complete all as specified and directed

M&L for Dismantling of ACSR conductors after unbinding from insulators complete all as specified and directed

Supply and fixing in replacement of ACSR conductor weasel (6/1/2.59 mm) to be drawn straight horizontal on over head lines on existing poles including binding with insulators. Weight of conductor shall be measured straight horizontal distance between centre of two adjacent poles and calculating weight of conductor of size and length by adding 3% extra for sag ,jointing jumpers,etc complete all as specified and directed,

S&F in replacmement LT spacer 02 way fix type made out of PVC material and suitable to work on 1100 volts fixed between 02 conductors in any position along the LT line for any size of conductor along the feeder complete all as specified and directed.

S&F in replacement LT spacer 05 way spiral type made out of PVC material and suitable to work on 1100 volts fixed between 05 conductors in any position along the LT line for any size of conductor along the feeder complete all as specified and directed.

Supplying, laying, jointing and testing in replacement in trenches, passing through ducts/pipes, fixing along poles, jointing and testing ; XLPE cable insulated, screened, PVC bedded, galvanized steel wire or strip armoured electric power cable (heavy duty) with aluminium stranded conductor 1100 volts grade of size 3.5 core 240 Sq mm including taking down old unserviceable cable complete all as specified and directed

All as per BOQ srl item No.11.00 here in above but of size 3.5 core 150 Sqmm complete all as specified and directed

All as per BOQ srl item No.11.00 here in above but of size 3.5 core 120 Sqmm complete all as specified and directed

All as per BOQ srl item No.11.00 here in above but of size 3.5 core 95 Sqmm complete all as specified and directed

All as per BOQ srl item No.11.00 here in above but of size 3.5 core 70 Sqmm complete all as specified and directed

All as per BOQ srl item No.11.00 here in above but of size 3.5 core 50 Sqmm complete all as specified and directed.

All as per BOQ srl item No.11.00 here in above but of size 3.5 core 35 Sqmm complete all as specified and directed

All as per BOQ srl item No.11.00 here in above but of size 4 core 25 Sqmm complete all as specified and directed

All as per BOQ srl item No.11.00 here in above but of size 4 core 16 Sqmm complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation laying of cables etc and getting out in soft loose soil complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil completed all as specified and directed

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point as in soil complete all as specified and directed

M&L for sand cushioning to cable with a layer of sand 8cm deep before laying the cable and 15cm deep after laying the cable (punned down to 18cm depth after laying and stretching of cable) complete all as specified and directed Note: Punned down thickness of 18cm shall be measured for payment purpose only.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed

S&F GI tubing 80 mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position including taking down existing one complete all as specified and directed

All as per BOQ srl item No. 25.00 here in above but of size 50mm bore complete all as specified and directed

All as per BOQ srl item No. 25.00 here in above but of size 40mm bore complete all as specified and directed

M&L for making bore to road/cement path/hard standing for providing GI pipe 40/50/80 mm both end socketed for passing armoured cable incl making good the disturbed surface complete all as specified and directed

S&F end joint kit in replacement for 1.1 KV grade suitable for outdoor type terminal heat shrinkable type joints with jointing material for 3.5 core XLPE armoured aluminium conductor cable of size 185/240/300 Sq mm complete all as specified and directed

S&F end joint kit in replacement for 1.1 KV grade suitable for outdoor type terminal heat shrinkable type joints with jointing material for 3.5 core XLPE armoured aluminium conductor cable of size 70/150 Sq mm complete all as specified and directed

S&F end joint kit in replacement for 1.1 KV grade suitable for outdoor type terminal heat shrinkable type joints with jointing material for 4 core XLPE armoured aluminium conductor cable of size 35/50 Sq mm complete all as specified and directed

S&F end joint kit in replacement for 1.1 KV grade suitable for outdoor type terminal heat shrinkable type joints with jointing material for 4 core XLPE armoured aluminium conductor cable of size 16/25 Sq mm complete all as specified and directed

S&F joint kit in replacement kit for 1.1 KV grade suitable for straight through heat shrinkable type joints with jointing material for 3.5 core XLPE armoured aluminium conductor cable of size 185/240/300 Sq mm complete all as specified and directed

S&F joint kit in replacement kit for 1.1 KV grade suitable for straight through heat shrinkable type joints with jointing material for 3.5 core XLPE armoured aluminium conductor cable of size 70/150 Sq mm. complete all as specified and directed

S&F joint kit in replacement kit for 1.1 KV grade suitable for straight through heat shrinkable type joints with jointing material for 4 core XLPE armoured aluminium conductor cable of size 25/35/50 Sq mm complete all as specified and directed

S&F in repairs MCCB 63 Amp, 4 pole rupturing capacity 16 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repairs MCCB 100 Amp, 4 pole rupturing capacity 16 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repairs MCCB 125 Amp, 4 pole rupturing capacity 16 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repairs MCCB 160 Amp, 4 pole rupturing capacity 36 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repairs MCCB 200 Amp, 4 pole rupturing capacity 36 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repairs MCCB 250 Amp, 4 pole rupturing capacity 36 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repairs MCCB 350 Amp, 4 pole rupturing capacity 36 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repairs MCCB 400 Amp, 4 pole rupturing capacity 36 KA with fixed thermal release fixed magnetic protection complete all as specified and directed. .

S&F in repairs MCCB 630 Amp, 4 pole rupturing capacity 50 KA with fixed thermal release fixed magnetic protection complete all as specified and directed.

S&F in repalcement Bus Bar Chamber of size 30cm x 30cm x 15cm suitable of 3 phase 433 Volts outdoor type and neutral made out of 3.15 mm thick M S Sheet with 100 Amps rated aluminium busbar (4 Nos ) PVC sleeves and coloured (Red,Yellow,Blue and Black) with locking arrangments and fixing the busbar on the wall with necessary fixing arrangement complete alongwith all necesary cable connection with thimbles nut bolts etcs,lugs and cable gland including 2 coat of grey colour paint over a coat of red oxide primer all as directed.

All as per BOQ srl item No. 45.00 here in above but of size 60cmx60cmx45cm with 400Amps busbar complete all as specified and directed

S&F including taking down LT feeder pillar panel weather proof outdoor type double door fabricated out of 3.15mm thick CRCA sheet with epoxy powder coating of RAL-7035( Siemens grey) shade with matt finish with seven tank pre treatment process.The panel shall be fabricated by CPRI approved manufacturer only.The panel shall be compartmentized designed totally enclosed ,dust & vermin proof,confirming to degree of protection IP-55,gasket between all adjacent units and beneath all covers shall be provided to render the joint dust proof. All doors and covers shall be provided with cylindrical panel locked .The panel shall be provided with alluminium bus bars,electrolytic grade of adequate rating or as specified below.The bus bars and interconnecting links shall be insulated with heat shrinkable PVC sleeve with RYB and black colour coding.The bus bar shall be supported on unbreakable,non hygroscopic,SMC insulated supports at sufficiently close interval to prevent bus bars sag and shall be housed in a dedicated compartment.The panel shall be prewired with FRLS PVC insulated copper conductors cables of suitable size properly tagged and secured. The panel shall be provided with digital Voltmeter/Ammeter with cast resign CTs & RYB LED indicating lamps at incoming. The panel shall be provided with heavy duty steel cable glands of adequate size for incoming & ali outgoing cables.the panel shall be provided with manufacturer name plate,skull & bone danger notice board etc. the panel shall be provided with 04 numbers 50mmx50 mmx6mm thick angle iron supports duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth at per site requirement.All MCCBs shall be provided with spreader links with phase seperator on both sided and suitable extended rotary handle for incoming MCCB complete all as specified and as directed.. the panel shall be provided with and including the following accessories : (a) Aluminium bus bar -600 Amps rating suitable for 3 phase 4 wire system INCOMING:- (i) MCCB 4P 400 Amps 36 KA breaking capacity with adjustable thermal & adjustable magnetic over load protection- 01 Nos (ii) Digital Ammeter 0-200 Amp-01 Nos (iii) Digital Voltmeter 0-500 Volt-01 Nos (iv) LED Indicating lamp R,Y, B-01 Nos OUTGOING:- (i) MCCB 4P -200Amps 25 KA breaking capacity with fixed thermal & fixed magnetic over load protection -02 Nos (ii) MCCB 4P -100Amps 25 KA breaking capacity with fixed thermal & fixed magnetic over load protection with-02Nos

S&F including taking down LT feeder pillar panel weather proof outdoor type double door fabricated out of 3.15mm thick CRCA sheet with epoxy powder coating of RAL-7035( Siemens grey) shade with matt finish with seven tank pre treatment process.The panel shall be fabricated by CPRI approved manufacturer only.The panel shall be compartmentized designed totally enclosed ,dust & vermin proof,confirming to degree of protection IP-55,gasket between all adjacent units and beneath all covers shall be provided to render the joint dust proof. All doors and covers shall be provided with cylindrical panel locked .The panel shall be provided with alluminium bus bars,electrolytic grade of adequate rating or as specified below.The bus bars and interconnecting links shall be insulated with heat shrinkable PVC sleeve with RYB and black colour coding.The bus bar shall be supported on unbreakable,non hygroscopic,SMC insulated supports at sufficiently close interval to prevent bus bars sag and shall be housed in a dedicated compartment.The panel shall be prewired with FRLS PVC insulated copper conductors cables of suitable size properly tagged and secured..The panel shall be provided with digital Voltmeter/Ammeter with cast resign CTs & RYB LED indicating lamps at incoming. The panel shall be provided with heavy duty steel cable glands of adequate size for incoming & ali outgoing cables..the panel shall be provided with manufacturer name plate,skull & bone danger notice board etc. the panel shall be provided with 04 numbers 50mmx50 mmx6mm thick angle iron supports . duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth at per site requirement.All MCCBs shall be provided with spreader links with phase seperator on both sided and suitable extended rotary handle for incoming MCCB complete all as specified and as directed.. the panel shall be provided with and including the following accessories : (a) Aluminium bus bar -600 Amps rating suitable for 3 phase 4 wire system INCOMING:- (i) MCCB 4P 400 Amps 36 KA breaking capacity with adjustable thermal & adjustable magnetic over load protection -01 Nos (ii) Digital Ammeter 0-200 Amp-01 Nos (iii) Digital Voltmeter 0-500 Volt-01 Nos (iv) LED Indicating lamp R,Y, B-01 Nos OUTGOING:- (i) MCCB 4P -100Amps 16 KA breaking capacity with fixed thermal & fixed magnetic over load protection -03Nos (ii) MCCB 4P - 63 Amps 16 KA breaking capacity Nos-4

S&F LT feeder pillar panel weather proof outdoor type double door fabricated out of 3.15mm thick CRCA sheet with epoxy powder coating of RAL-7035( Siemens grey) shade with matt finish with seven tank pre treatment process.The panel shall be fabricated by CPRI approved manufacturer only.The panel shall be compartmentized designed totally enclosed ,dust & vermin proof,confirming to degree of protection IP-55,gasket between all adjacent units and beneath all covers shall be provided to render the joint dust proof. All doors and covers shall be provided with cylindrical panel locked .The panel shall be provided with alluminium bus bars,electrolytic grade of adequate rating or as specified below.The bus bars and interconnecting links shall be insulated with heat shrinkable PVC sleeve with RYB and black colour coding.The bus bar shall be supported on unbreakable,non hygroscopic,SMC insulated supports at sufficiently close interval to prevent bus bars sag and shall be housed in a dedicated compartment.The panel shall be prewired with FRLS PVC insulated copper conductors cables of suitable size properly tagged and secured..The panel shall be provided with digital Voltmeter/Ammeter with cast resign CTs & RYB LED indicating lamps at incoming.Sthe panel shall be provided with heavy duty steel cable glands of adequate size for incoming & ali outgoing cables..the panel shall be provided with manufacturer name plate,skull & bone danger notice board etc. the panel shall be provided with 04 numbers 50mmx50 mmx6mm thick angle iron supports . duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth at per site requirement.All MCCBs shall be provided with spreader links with phase seperator on both sided and suitable extended rotary handle for incoming MCCB complete all as specified and as directed.. the panel shall be provided with and including the following accessories : (a) Aluminium bus bar -400 Amps rating suitable for 3 phase 4 wire system INCOMING:- (i) MCCB 4P 250 Amps 36 KA breaking capacity with adjustable thermal & adjustable magnetic over load protection-01 Nos (ii) Digital Ammeter 0-200 Amp-01 Nos (iii) Digital Voltmeter 0-500 Volt-01 Nos (iv) LED Indicating lamp R,Y, B-01 Nos OUTGOING:- (i) MCCB 4P -160 Amps 16 KA breaking capacity with fixed thermal & fixed magnetic over load protection -01Nos (ii) MCCB 4P -100Amps 16 KA breaking capacity with fixed thermal & fixed magnetic -01 Nos (iii) MCCB 4P - 63 Amps 16 KA breaking capacity Nos-04

S&F including taking down LT feeder pillar panel weather proof outdoor type double door fabricated out of 3.15mm thick CRCA sheet with epoxy powder coating of RAL-7035( Siemens grey) shade with matt finish with seven tank pre treatment process.The panel shall be fabricated by CPRI approved manufacturer only.The panel shall be compartmentized designed totally enclosed ,dust & vermin proof,confirming to degree of protection IP-55,gasket between all adjacent units and beneath all covers shall be provided to render the joint dust proof. All doors and covers shall be provided with cylindrical panel locked .The panel shall be provided with alluminium bus bars,electrolytic grade of adequate rating or as specified below.The bus bars and interconnecting links shall be insulated with heat shrinkable PVC sleeve with RYB and black colour coding.The bus bar shall be supported on unbreakable,non hygroscopic,SMC insulated supports at sufficiently close interval to prevent bus bars sag and shall be housed in a dedicated compartment.The panel shall be prewired with FRLS PVC insulated copper conductors cables of suitable size properly tagged and secured.The panel shall be provided with digital Voltmeter/Ammeter with cast resign CTs & RYB LED indicating lamps at incoming. The panel shall be provided with heavy duty steel cable glands of adequate size for incoming & ali outgoing cables..the panel shall be provided with manufacturer name plate,skull & bone danger notice board etc. the panel shall be provided with 04 numbers 50mmx50 mmx6mm thick angle iron supports . duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth at per site requirement.All MCCBs shall be provided with spreader links with phase seperator on both sided and suitable extended rotary handle for incoming MCCB complete all as specified and as directed.. the panel shall be provided with and including the following accessories : (a) Aluminium bus bar -600 Amps rating suitable for 3 phase 4 wire system INCOMING:- (i) Incoming Changeover Switch 4P 400 Amps- 01 Nos (i) Digital Ammeter 0-400 Amp-01 Nos (iii) Digital Voltmeter 0-500 Volt-01 Nos (iv) LED Indicating lamp R,Y, B-01 Nos OUTGOING:- (i) outgoing MCB 4P -200Amps 25 KA breaking capacity with fixed thermal & fixed magnetic over load protection-04 Nos

S&F including taking down LT feeder pillar panel weather proof outdoor type double door fabricated out of 3.15mm thick CRCA sheet with epoxy powder coating of RAL-7035( Siemens grey) shade with matt finish with seven tank pre treatment process.The panel shall be fabricated by CPRI approved manufacturer only.The panel shall be compartmentized designed totally enclosed ,dust & vermin proof,confirming to degree of protection IP-55,gasket between all adjacent units and beneath all covers shall be provided to render the joint dust proof. All doors and covers shall be provided with cylindrical panel locked .The panel shall be provided with alluminium bus bars,electrolytic grade of adequate rating or as specified below.The bus bars and interconnecting links shall be insulated with heat shrinkable PVC sleeve with RYB and black colour coding.The bus bar shall be supported on unbreakable,non hygroscopic,SMC insulated supports at sufficiently close interval to prevent bus bars sag and shall be housed in a dedicated compartment.The panel shall be prewired with FRLS PVC insulated copper conductors cables of suitable size properly tagged and secured..The panel shall be provided with digital Voltmeter/Ammeter with cast resign CTs & RYB LED indicating lamps at incoming. The panel shall be provided with heavy duty steel cable glands of adequate size for incoming & ali outgoing cables..the panel shall be provided with manufacturer name plate,skull & bone danger notice board etc. the panel shall be provided with 04 numbers 50mmx50 mmx6mm thick angle iron supports . duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth at per site requirement.All MCCBs shall be provided with spreader links with phase seperator on both sided and suitable extended rotary handle for incoming MCCB complete all as specified and as directed.. the panel shall be provided with and including the following accessories : (a) Aluminium bus bar -300 Amps rating suitable for 3 phase 4 wire system INCOMING:- (i) MCCB 4P -315 Amps 25 KA breaking capacity with adjustable thermal & adjustable magnetic over load protection -01 Nos (ii) Digital Ammeter 0-400 Amp-01 Nos (iii) Digital Voltmeter 0-500 Volt-01 Nos (iv) LED Indicating lamp R,Y, B-01 Nos OUTGOING:- (i) MCCB 4P -200 Amps 16 KA breaking capacity with fixed thermal & fixed magnetic over load protection -02 Nos (ii) MCCB 4P - 63 Amps 16 KA breaking capacity Nos-01

M&L in replacement earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected to and including galvanized earth lead strip 32X6 mm size upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and panel all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,40mm dia,light grade,upto7.5 mtr long for protection of earth lead upto test point etc complete all as specified and as directed. Note : On testing, if the desired earth resistance is not obtained, entire earthing shall be re-done by contractor till the desired earth resistance is obtained without accruing any extra cost to the government.

Taking down/out old unserviceable building Street light of any type / wattage and Supply and fixing LED light fittings 90 watts, input 120 volts to 280 volts volts, life 25000 Hrs, operating temp -20 degree to 50 degree,color temperature 5700K, initial efiicacy= 100 lm/watt ,IP 66 , high pressure Die cast aluminium housing with weather proof gasket for lamp . the driver must be constant current type having THD 10% and power factor 0.95 with short circuit protection , open circuit protection, reverse circuit protection, high voltage protection, protection against 5 KV high surges, the luminaire must have secondary optics with perfectly matched lenses for better light control and comply to IEC60598/IS10322 necessary connection with multistranded copper conductor cable 3 core 1.0 sqmm for connection complete all as specified and directed .

Restretching properly and tightening ACSR conductor including rebinding after straining the single conductor on LT pole of any size replacing of jumpers if necessary complete all as specified and directed

M&L for Cutting vegetation and surface dressing not exceeding 15 cm deep including removing the materials to a distance not-exceeding 60 mtr complete all as specified and directed Note :- Item shall be executed twice in each installation and quantity is given for two operation. However unit rate to be quoted by the tenderer for single operation only

M&L for trimming of tree branches (touching HT/LT OH line)upto 10cm girth at any height carefully taking shutdown including suitable disposal of cut of tree branches as in repair complete all as specified and directed Note:- Tools & plants including safety measures equipments like belt,ladder & rops etc shall be arranged by the contractor at own arrangement. Cost of the same is deemed to be included in quoted rate.

M&L for preparation of old steel surfaces and applying alternatively in AF Pattern one coat of synthetic enamel black paint to steel tabular, pole upto 1 mtr height from ground level and remaining with two coats aluminium paint to LT pole and Cross arms including numbering of pole with black paint complete all as specified and directed