Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 2,23,950Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_691211_1Tender No
CWE/HSR/52 of 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Attending the complaint(s) entered into the docket pertaining to Carpentry Works, rectifying the defects and resolving the complaint(s) complete all as specified and as directed. Note: (a) All the complaint(s) entered into the same docket shall be treated as one unit of complaint(s) and shall be measured for payment. (b) The complaint(s) rectified shall be measured under the respective or relevant items of schedule “A” if the respective and relevant items are matching with the requirement of complaint(s) to the extent of 85% to 115%. The remaining complaint(s) with the docket shall be treated as one unit and shall be paid if it shall be more than zero. (c) The complaint(s) to be rectified shall include transportation, conveyance, labour, tools and plants including the cost of minor materials and the quoted rate shall be inclusive of all these factors. (d) The complaint(s) entered into the same docket i.e. one unit of complaint(s) shall be treated as resolved if all the complaint(s) pertaining to the dockets have been resolved.
2500
-
-
... More
Notes Applicable Item to Srl Nos 1 to 4: - (a) The manpower shall be deployed by the contractor as per the requirements. The requirement of manpower shall be updated and estimated by the contractors fortnightly as per the complaints to have been received and it shall be used as tentative guidelines for further period. The calculation details shall be submitted to the Engineer-in-Charge for approval. However, the following minimum manpower shall mandatorily be deployed by the contractor: - (i) Electrical with helper – Each Day Each One (ii) Plumber with helper – Each Day Each One (iii) Carpenter with Helper- Each Day Each One (iv) Sewage cleaner – Each Day Each One (v) Welder with helper – Each Alternative Day Each One (vi) Mason with helper – Each Alternative Day Each one (b) Attendance register shall be prepared and maintained by the contractor and shall be put up on each day to the Engineer-in-Charge or the Junior Engineer assigned by him for signature. (c) The contractor shall depute the minimum numbers of workmen as mentioned above. If he fails to depute the requisite minimum numbers, he shall inform the Engineer-in-Charge in writing about the reasons for not deputing his workmen. The compensation of ₹100 per day per workmen shall be levied from the contractor. The GE may waive off the compensation if the contractor fails to depute by force majeure. (d) The contractor shall receive and record complaint(s) from 0900 hours to 1700 hours on each day at MES service centre. The docket shall be prepared within one hour from the receipt of the complaint(s) and shall be assigned to their workmen within two hours from the receipt of the complaint(s). (e) The complaint(s) shall be attended and resolved within 24 hours from the receipt of the complaints and the docket duly signed by the occupants regarding resolution of complaint(s) shall be submitted.
-
-
-
... More
(f) If the complaint(s) have not been resolved within 24 hours from the receipt of the complaints, they shall be put up to the Engineer-in-Charge for extended period to resolve the complaint. The Engineer-in-Charge may extend the period upto 4th day with or without compensation. The compensation shall be ₹10/- per unit of complaint(s) per day from 2nd day upto 4th day. The GE may extend the period upto 15th day with or without compensation. The compensation shall be ₹20/- per unit of complaint(s) per day from 4th day upto 15th day. The Accepting Officer shall decide how to resolve the complaint(s) after 15th day considering all the facts and the circumstances. The Accepting Officer may get the complaint(s) resolved through other agency with or without compensation. The additional compensation to be levied by the Accepting Officer shall be ₹500/ per unit of complaint(s). The Accepting Officer may also waive off the compensation if he has satisfied that the nature and degree of skill required to resolve the complaint(s) are not within the scope of the contract pertaining to day to day maintenance. (g) The compensation due to the absence of workmen and the compensation for not resolving the complaint(s) shall be treated as separate/distinct/different and shall be levied separately or together if the obligation(s) have not been performed. (h) Format of docket slip and complaint register which shall be kept in complaint cell are attached as per Appendix 'E' and Appendix 'F' of the tender documents. Stationery i.e. log sheets, docket slips, job cards, complaint registers, handing taking registers, store issue register, etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items of schedule “A”. (i) The minor materials shall mean nails, screws, nuts, bolts, washers, flexible wires, tapes, thimbles, Teflon tape, clothes, rawl plugs, hinge, cement upto 1 Kg for each unit of complaints including required quantities of sand/ stone dust, white cement upto 0.25 Kg for each unit of complaints, putty, welding rods, painting works upto ₹10.00, and etc.
-
-
-
... More
(j) The contractor shall have minimum stocks of materials to meet the requirement of one month. The minimum stock of the materials of the first month shall be estimated and calculated as per the quantities of the contract and as per the completion period. The minimum stocks of the materials shall be recalculated, estimated, updated fortnightly on the basis of the consumption of the previous fortnight and the calculation details shall be submitted to the Engineer-in-Charge for approval. However, the completion period to resolve any complaint shall have no connection with the minimum stocks and the contractor shall arrange the materials to resolve the complaint(s) within the prescribed period. (k) The contractor shall provide uniform to their workmen and the supervisor as approved by the GE. All workmen and the supervisor shall wear the uniform daily. The quoted rate shall be inclusive of all these factors.
-
-
-
... More
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed.
100
-
-
... More
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed.
100
-
-
... More
Taking down wooden door shutter area exceeding 1.00 but not exceeding 2.00 sqm each complete all as specified and as directed.
150
-
-
... More
Resecuring or easing & adjusting without taking down wooden door, window, ventilator shutter any type, any size, any thickness by planning with plane jack, by tightening of hinge screw, by adjusting/tightening tower bolts, sliding bolts etc. and making it fully functional complete all as specified and as directed.
300
-
-
... More
S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 125 mm X 60 mm, Profile D, single or double rebate including hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed.
250
-
-
... More
S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 105 mm X 60 mm, Profile B, single rebate including hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed.
245
-
-
... More
M & L for cement concrete M10 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and as directed.
3.5
-
-
... More
Taking down cupboard shutter/ partition/ shelves of any description with frame if any exceeding 1 sqm but not exceeding 2 sqm Each complete all as specified and as directed.
180
-
-
... More
S & F for 1 mm thick cupboard shutter with frame made of mild steel as per TD/2004/06 sheet Nos 1/2 to 2/2 of HQ CE Jaipur Zone complete all as specified and as directed.
180
-
-
... More
Dismantling of wrought or mild steel work of any description not otherwise described into primary parts.
10
-
-
... More
S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
2000
-
-
... More
S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and as directed. (Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately.)
140
-
-
... More
S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 mm X 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with mild steel hold fast/ lugs/stainless steel dash fasteners of required dia and length complete all as specified and as directed. (mild steel hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
235
-
-
... More
S & F powder coated, minimum thickness 50 micron, aluminium sections for doors, windows, ventilators, door partition including fabrication of frame, shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified and as directed. Note : (i) Glass panes, wire mesh & handle will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.
2000
-
-
... More
S & F 35 mm thick, timber species of super group or group I or group II and durability class II as per IS 12896: 1990 and first grade as per IS 1003 (Part-1): 2003, factory made, panelled shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board, Grade -I, Type -I (solid core, general purpose), designation (SO GP-I) conforming to IS 3097 supplied and fixed to chowkhats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated.
90
-
-
... More
S & F flush door shutters, 30 mm thick, solid core of block boards construction, MR grade, commercial type with stiles, rails and lipping of timber as given in Group 2A and Group 2B of Annex B of IS 2202 (Part 1): 1999, both sides face panels of plywood as per IS 710: 2010, internally lipped complete all as specified and as directed.
280
-
-
... More
M & L for 35 mm thick, timber species of super group or group I or group II and durability class II as per IS 12896: 1990 and first grade as per IS 1003 (Part-1): 2003, factory made, glazed and skeleton shutters, subdivided into small panes using muntins (sash bars), open rebated and prepared to receive glass, wire gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I section 8 Clause 8.24 (a) and shall be kiln seasoned as per IS 1141 and chemically pressure treated as per IS 401 complete all as specified and as directed.
200
-
-
... More
M & L for preparation of new or previously untreated wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
992
-
-
... More
Repairing of old defective window/ ventilator by necessary welding works and making the window serviceable and complete all as specified and as directed.
150
-
-
... More
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
160
-
-
... More
S & F butt hinges, extruded aluminium alloy with brass wire pin, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996, hinge designation 100B21 as per IS 205: 1992 complete all as specified and as directed.
400
-
-
... More
S & F medium weight stainless steel butt hinges, 100 mm size, naturally finished bright with smooth surface without chemical coating complete all as specified and as directed.
150
-
-
... More
S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
100
-
-
... More
S & F cast aluminium alloy handle, cast type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
700
-
-
... More
S & F in repairs cast aluminium alloy handle, cast type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
300
-
-
... More
S & F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, dia of bolt 12 mm, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed.
700
-
-
... More
S & F in repairs aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, dia of bolt 12 mm, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed.
300
-
-
... More
S & F aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
150
-
-
... More
S & F in repairs aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
100
-
-
... More
S & F aluminium alloy hasps and staples, type -1, safety type, size 115 mm, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 including fixing with screws complete all as specified and as directed.
20
-
-
... More
S & F extruded aluminium alloy handle, fabricated type, 100 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
50
-
-
... More
S & F in repairs mild steel door spring of rat tail type of size 300 mm, bright finish including roller and roller plate complete all as specified and as directed.
100
-
-
... More
S & F in repairs stainless steel curtain rod including bracket and holder made out of stainless steel sheet of grade X 02Cr19Ni1O (304 S2), surface finish No. 4 as per IS 6911: 2017, 25 mm dia complete all as specified and as directed.
600
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
400
-
-
... More
Supply & fix sheet glass, ordinary quality, 3 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
360
-
-
... More
S & F 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.
160
-
-
... More
S & F in repairs floor door stoppers made out of aluminium alloy pressure die casting body and tongue with hard drawn steel wire spring, overall length of cover plate 150 mm, 4.5 mm thickness of cover plate, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996, suitable for 40 & 45 mm thickness of door shutter, fixed in floor complete all as specified and as directed.
150
-
-
... More
S & F in repairs exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, aluminium alloy non porous body and black plate, aluminium alloy piston or pack piston/ pillion, anodized finish not be less than Grade AC 15 of IS 1868 : 1996 with transparent anodic film as per IS 3564: 1995 complete all as specified and as directed.
20
-
-
... More
S & F double action concealed type floor springs (hydraulically regulated) made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel top cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
10
-
-
... More
S & F stainless steel, premium design, heavy weight, wall mounted cloth hanger of 6 pin, minimum length 250 mm fixed screws and wall plugs complete all as specified and as directed.
210
-
-
... More
S & F in repairs prelaminated particle board (decorative lamination on one side and other side balancing lamination), 20 mm thick, grade I or II & type IV (Designation PLB-14 or PLB-24), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive), fixed with screws to timber/ steel frame work for vertical applications as panelling, partitions, cupboard shutter, etc. complete all as specified and as directed.
250
-
-
... More
S & F one-piece EWC with soft close seat cover, ‘S’ Trap, twin flush fittings, Siphonic Jet Flushing and 3D flush as per catalogue No S1013176 of M/s Cera (CERA EWCs-CHILE) or equivalent of Make mentioned under Appendix "B" including ‘S’ trap, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed.
5
-
-
... More
S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed.
40
-
-
... More
S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.
60
-
-
... More
S & F in repairs wash basin, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.
40
-
-
... More
S & F in repairs 15 mm dia basin or sink mixture, brass, chromium plated, fancy type long body for mixing hot and cold water screwed down for iron pipe complete all as specified and as directed.
50
-
-
... More
S & F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) as per catalogue No FLR-CHR-5281N of Jaquar or equivalent of Make mentioned under Appendix "B" complete all as specified and as directed.
60
-
-
... More
S & F in repairs 15 mm nominal size, screw down bib taps, cast copper alloy body and body components with crutch handle, nickel-chromium plated finished complete all as specified and as directed.
60
-
-
... More
S & F in repairs 15 mm nominal size, nonrising spindle type fancy stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
200
-
-
... More
S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.
60
-
-
... More
S & F 32 in repairs mm nominal size, copper alloy, nickel chromium plated finish waste fittings with including silicone sealant complete all as specified and as directed.
50
-
-
... More
M & L in repairs for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
200
-
-
... More
S & F in repairs flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed.
300
-
-
... More
S & F in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastics cleats, minimum weight 190 gms complete all as specified and as directed.
100
-
-
... More
S & F in repairs brass, chromium plated toilet paper holder complete all as specified and as directed.
100
-
-
... More
S & F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
200
-
-
... More
S & F in repairs corner sheet glass shelf assembly consisting of 8 mm thick glass sheet shelf, 30 cm wide with chromium plated screwed down for fixing to wall with screws complete all as specified and as directed.
300
-
-
... More
S & F in repairs sheet glass shelf assembly consisting of 5.50 mm thick glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.
200
-
-
... More
S & F in repairs in repairs thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating complete all as specified and as directed.
150
-
-
... More
S & F in repairs PVC box type mirror cabinet selected quality of size 45 cm X 35 cm X 15 cm thick coloured fixed with min 04 Nos screws fixed on walls complete all as specified and as directed. (Make: Prayag Cat No 557 or equivalent of Make as mentioned under Appendix "B" )
100
-
-
... More
S & F in repairs chromium plated soap dish fancy type oval shaped complete all as specified and as directed.
80
-
-
... More
Taking down eaves gutters and rainwater pipes (any size or pattern), soil waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store or taken on schedule of credit (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
250
-
-
... More
S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, laid in trenches complete all as specified and as directed.
100
-
-
... More
S & F UPVC bends without inspection door (any angle), 110 mm dia conforming to IS 14735: 1999 complete all as specified and as directed.
50
-
-
... More
S & F PVC-U, type A as per IS 13592: 2013 single socketed rain water pipes in any length with rubber ring joints, 110 mm dia, fixed to walls complete all as specified and as directed.
50
-
-
... More
S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, fixed to walls complete all as specified and as directed.
50
-
-
... More
S & F PVC-U, type A as per IS 13592: 2013 single socketed rain water pipes in any length with rubber ring joints, 75 mm dia, fixed to walls complete all as specified and as directed.
25
-
-
... More
S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, fixed to walls complete all as specified and as directed.
25
-
-
... More
S & F UPVC bends with inspection door (any angle), 110 mm dia conforming to IS 14735: 1999 complete all as specified and as directed.
10
-
-
... More
S & F UPVC bends with inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and as directed.
20
-
-
... More
S & F UPVC Tee(87.5⁰) single, 110 mm dia with inspection door conforming to IS 14735: 1999 complete all as specified and as directed.
30
-
-
... More
S & F UPVC Tee(87.5⁰) single, 75 mm dia with inspection door conforming to IS 14735: 1999 complete all as specified and as directed.
30
-
-
... More
S & F UPVC vent cowl, 75 mm dia conforming to IS 14735: 1999 complete all as specified and as directed.
10
-
-
... More
Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and as directed.
300
-
-
... More
Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and as directed.
200
-
-
... More
Refixing 15 mm bore of steel tubing and connections in new or old positions (walls, ceilings, floors, etc.) complete all as specified and as directed.
30
-
-
... More
Refixing 20 mm bore of steel tubing and connections in new or old positions (walls, ceilings, floors, etc.) complete all as specified and as directed.
30
-
-
... More
Supplying & fixing to walls and ceilings or laid in floors 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
270
-
-
... More
Supplying & fixing to walls and ceilings or laid in floors 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
170
-
-
... More
Dismantling water tanks capacity exceeding 500 litres but not exceeding 1000 Litres and keeping aside for credit complete all as specified and as directed.
50
-
-
... More
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.
50
-
-
... More
Dismantling water tanks capacity exceeding 250 litres but not exceeding 500 Litres and keeping aside for credit complete all as specified and as directed.
25
-
-
... More
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.
25
-
-
... More
S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams complete all as specified and as directed.
50
-
-
... More
S & F in repairs 20 mm nominal size brass float valve, high pressure, with polythene float and flynut, screwed for iron pipe and fixed complete all as specified and as directed.
200
-
-
... More
Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water complete all as specified and as directed.
1000
-
-
... More
Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
350
-
-
... More
Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately.
350
-
-
... More
Supply only liquid water proofing compound.
30
-
-
... More
Material and labour for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
100
-
-
... More
M & L for rough cast plaster using crushed stone of size between 6 mm to 12 mm, coarse sand and cement mixed in the ratio of (1:1:1) over and including rendering coat of 10 mm thick on fair faces of brick work or concrete surfaces or stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:3 finished even and fair complete all as specified and as directed.
200
-
-
... More
M & L for applying white cement based polymeric putty conforming to IS 17545: 2021, average thickness 2 mm on new, old plastered surfaces, mixed with water in mechanical mixer, applying in one or more coats not exceeding the recommended thickness and keeping the gap/ the interval in subsequent coats, applying on the moistened wall surface uniformly in an upward direction with the help of a putty blade complete as per the manufacturer’s instructions and complete all as specified and as directed.
900
-
-
... More
M & L for applying two coats of oil bound distemper over one coat of alkali resistant primer on plastered surfaces of wall treated with any type of putty complete all as specified and as directed.
4350
-
-
... More
M & L for complete removal of existing finish on walls including chajjas, facias etc and preparing and applying white cement based polymeric putty conforming to IS 17545: 2021, average thickness 2 mm on old plastered surfaces completely removed from the existing treatment, mixed with water in mechanical mixer, applying in one or more coats not exceeding the recommended thickness and keeping the gap/ the interval in subsequent coats, applying on the moistened wall surface uniformly in an upward direction with the help of a putty blade complete as per the manufacturer’s instructions and complete all as specified and as directed.
9000
-
-
... More
Preparation of newly plastered surfaces/boards on ceilings and applying three coats of white wash complete all as specified and as directed.
100
-
-
... More
Preparation of old decorated surfaces on ceilings and applying two coats of white wash complete all as specified and as directed.
250
-
-
... More
M & L for preparing plastered surfaces of wall treated with any type of putty including chajjas, facias etc. and applying premium acrylic smooth exterior paint (100% acrylic) with silicone additives in two or more coats, that offers an anti-algal, excellent resistance to ultraviolet radiation, dirt pick up resistance (DPUR) property, rich sheen, low VOC, of approved shade over a coat of primer as per the manufacturer’s instructions, applying using brush, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note: - The paint shall be as per Apex Ultima of Asian Paints or equivalent of Make mentioned under Appendix "B".
5550
-
-
... More
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed.
10
-
-
... More
M & L for brick work with fly ash bricks of class designation 7.5 and non-modular size as per IS 12894: 2002, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
10
-
-
... More
M & L for brickwork with fly ash bricks of class designation 7.5 and non-modular size as per IS 12894: 2002, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.
20
-
-
... More
Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
2
-
-
... More
Demolition of the existing treatment with lean concrete and providing and laying water proofing treatment in sunken portion of WCs, bathroom etc. complete all as specified and as directed comprising as under: - (a) Demolition of lean concrete and other types of filling in sunken portion and clean the sunken portion including vertical wall surface. (b) Laying cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course to achieve slope of 1:40. (c) Providing angle fillet of size 75 mm X 75 mm with cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound along the junction of slab and wall. (d) Applying first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm on horizontal and vertical surface. This layer will be allowed to air cure for 4 hours. Applying second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm on horizontal and vertical surface. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (e) Ponding Test for water leakage will be carried out for 72 hours. (f) Applying four course water proofing treatment on horizontal and vertical surface with APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 consisting of first course of bitumen primer conforming to IS 3384: 1986 @0.40 litre per sqm, second and fourth courses of bonding material of industrial bitumen of grade 85/25 conforming to IS 702: 2022 @ 1.20 kg per sqm and third course of APP membrane and including sealing all joints, overlapping etc. using Butane Torch as per Annex D of IS 16540: 2017. (g) Cutting grooves or chase in brick wall/ stone wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing compound as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017. (h) The remaining portion shall be filled with lean concrete in M2.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate (i) Provide spout of 32 mm GI pipe of length 450 mm. Note: APP membrane and cement slurry shall be applied on the wall upto the depth of the sunken. The horizonal and vertical area shall be measured for payment purposes.
20
-
-
... More
M & L for 75 mm thick plain cement concrete M10(Nominal Mix) using 40 mm nominal size graded stone aggregates, laid in alternate panel, finished surface even and fair including filling in position with 85/25 industrial grade bitumen mix filler of proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 cubic metre of coarse sand as in plinth protection complete all as specified and as directed.
80
-
-
... More
Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry or laid dry and pointed complete all as specified and as directed.
33
-
-
... More
Demolition of existing treatment of any description including cement plaster, roof padding any thickness from the roof surfaces of buildings including cleaning of top surfaces in all respect and preparing for further treatment and taking out and removing the rubbish, debris outside MD land complete all as specified and as directed.
39.6
-
-
... More
M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding in slope finished even and fair including provision of contraction joint 6 mm wide X 10 mm deep at 1.2 metre interval or part thereof, both ways on top of PCC padding and including filling with mastic bitumen with 85/25 industrial grade bitumen and coarse sand mixture. 1:3 by weight complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately.
19.8
-
-
... More
Material & labour for rendering 10 mm thick in cement mortar 1:3 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and as directed. (Note;- water proofing compound shall be measured and paid separately as supply only)
330
-
-
... More
M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying four course water proofing treatment with APP membrane HMHDPE 3 kg plain (thickness 2.1 mm) (total weight of the finished membrane not less than 3.0 kg/ sqm ± 5 % per sqm) confirming to IS 16540: 2017 consisting of first course of bitumen primer conforming to IS 3384: 1986 @0.40 litre per sqm, second and fourth courses of bonding material of industrial bitumen of grade 85/25 conforming to IS 702: 2022 @ 1.20 kg per sqm and third course of APP membrane and including sealing all joints, overlapping etc. using Butane Torch as per Annex D of IS 16540: 2017 complete all as specified and as directed.
330
-
-
... More
M & L for applying bituminous aluminium paint @ 0.15 kg per sqm over bituminous layer complete all as specified and as directed.
330
-
-
... More
Dismantling of Asbestos cement(corrugated, semi corrugated etc.) sheet in roof coverings.
200
-
-
... More
M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and as directed.
0.5
-
-
... More
M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated (profile) steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category C3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering, end rib designed as capillary barrier (capillary grove) fixed with self drilling screws of corrosion resistance class 3 as per AS 3566 Part-II and of suitable size and type as per AS 3566 Part-I as per manufacturer's instructions and EPDM washers including end and side lap, necessary scaffolding and safety measures at any floor complete all as specified and as directed.
200
-
-
... More
Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
500
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
740
-
-
... More
M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and including 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
50
-
-
... More
Dismantling of wall panelling of any type including cover fillet and frame work complete all as specified and as directed.
700
-
-
... More
M & L for PVC sheet wall panelling of thickness 5 mm (±0.25 mm) consisting of panels of desired size stuck on inner framework of 50 mm wide strips of 5 mm (±0.25 mm) thick Prelam PVC sheet. The panel & strips shall be sheet of Density 600 kg per cum. The strips should have in their center a grove of 6 mm width and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 255 mm between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long mild steel screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200 mm. A groove of 2 mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a Strips of 5 mm (±0.25 mm) thick PVC sheet of width 75 mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. The work shall be executed as specified and as directed by the Engineer-in-Charge.
700
-
-
... More
S & F in repairs PVC moulded 600 mm X 450 mm looking mirror of selected quality glass mounted on 6 mm thick commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and as directed.
160
-
-
... More
Providing and fixing galvanised steel holder bat clamps of approved design to 110 mm dia PVC-U rain water pipe/ soil waste pipe embedded in and including cement concrete blocks 100 mm X 100 mm X 100 mm of Nominal Mix (M15) using 20 mm nominal size graded crushed stone aggregate and cost of cutting holes and making good at any floor complete all as specified and as directed.
100
-
-
... More
S & F in repairs only 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
200
-
-
... More
Cleaning of PVC water tanks and from mouths of circulating pipes, etc. of capacity not exceeding 250 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge.
10
-
-
... More
Cleaning of PVC water tanks and from mouths of circulating pipes, etc. of capacity exceeding 250 litres but not exceeding 500 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge.
20
-
-
... More
Cleaning of PVC water tanks and from mouths of circulating pipes, etc. of capacity exceeding 500 litres but not exceeding 1000 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge.
20
-
-
... More
S & F in repairs man-hole hand-hole lids for 500 litres capacity water tank as per IS 12701: 1996 complete all as specified and as directed.
100
-
-
... More
S & F in repairs man-hole hand-hole lids for 1000 litres capacity water tank as per IS 12701: 1996 complete all as specified and as directed.
100
-
-
... More
S & F in repairs sinks with drainage board made of stainless steel 1 mm thick sheet kitchen or laboratory with plugs, washers and 40 mm nominal size, copper alloy, nickel chromium plated finish waste fittings with including silicone sealant; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipes overall size 915 mm X 460 mm bowel size 410 mm X 330 mm X 160 mm complete all as specified and as directed.
35
-
-
... More
S & F in repair door seal with brown aluminium frame 20 mm width and 0.50 mm thick with nylon brush all over width 30 mm and length of door seal 0.90 to 1.20 m fixing for aluminium/wooden door complete all as specified and as directed.
300
-
-
... More
Supply only galvanised iron pipe fitting, nominal bore 15 mm, any type conforming to IS 1239 (Part 2): 2011 complete all as specified and as directed.
400
-
-
... More
Supply only galvanised iron pipe fitting, nominal bore 20 mm, any type conforming to IS 1239 (Part 2): 2011 complete all as specified and as directed.
280
-
-
... More
Taking down ceiling fan, any sweep including disconnection of electric connection and dismantling the blades and transporting and depositing to AGE E/M store yard for repair, maintenance, servicing, paintings etc. complete all as specified and as directed.
350
-
-
... More
Collecting repaired, reconditioned, rectified etc. ceiling fan at AGE E/M store yard and transporting to the site an hanging ceiling fan and connecting up including provision of cable from ceiling rose, connectors to fan complete all as specified and as directed.
350
-
-
... More
Disassembling carefully ceiling fans (any make) of 1200 mm sweep, cutting & removing old copper winding wire and rewinding the same with new super enamelled copper wire of suitable size / gauge having class "A" insulation and weight not less than 275 gms including providing insulation by varnishing, oiling and greasing, replacing bearing and gunmetal shaft if required and reassembling including testing complete all as specified and as directed. Note: -(a) The cost of bearings shall be included in the quoted rate. (b) rewinding and repair shall be carried out at AGE E/M store yard. (c) The cost of machining work in body of ceiling fan by taking out worn out bearing, boring hole to accommodate ball bearings is included in quoted rate.
280
-
-
... More
Disassembling carefully ceiling fans (any make) of 1400 mm sweep, cutting & removing old copper winding wire and rewinding the same with new super enamelled copper wire of suitable size / gauge having class "A" insulation and weight not less than 325 gms including providing insulation by varnishing, oiling and greasing, replacing bearing and gunmetal shaft if required and reassembling including testing complete all as specified and as directed. Note: -(a) The cost of bearings shall be included in the quoted rate. (b) rewinding and repair shall be carried out at AGE E/M store yard. (c) The cost of machining work in body of ceiling fan by taking out worn out bearing, boring hole to accommodate ball bearings is included in quoted rate.
70
-
-
... More
M & L for preparation, cleaning ceiling fan of any sweep and any size and down rod with moist cloth with detergent powder, scrubbing the old paint with sandpaper, filling cavities with filler and painting with super quality synthetic enamel paint of glossy white colour in two coats using spray machine and writing MES /Fan no with black synthetic enamel paint complete all as specified and as directed.
350
-
-
... More
S & F in repairs capacitor 2.5 mfd to 3.15 mfd dry type with PVC clamp for ceiling fan complete all as specified and as directed.
450
-
-
... More
S & F in repairs ceiling fan stator of 1200 mm sweep including thick steel bolt with double nuts and locking pins and high quality rubber bushing to reduce vibration complete all as specified and as directed.
120
-
-
... More
S & F in repairs ceiling fan stator of 1400 mm sweep including thick steel bolt with double nuts and locking pins and high quality rubber bushing to reduce vibration complete all as specified and as directed.
30
-
-
... More
S & F in repairs ceiling fan rotor of 1200 mm sweep complete with copper winding wire complete all as specified and as directed.
120
-
-
... More
S & F in repairs ceiling fan rotor of 1400 mm sweep complete with copper winding wire complete all as specified and as directed.
30
-
-
... More
S & F in repairs ceiling fan mild steel body set (upper & lower) for ceiling fans of any sweep and make and fixing in position including nuts and bolts for fixing blades complete all as specified and as directed.
150
-
-
... More
S & F in repairs PVC canopy set (upper & lower) for ceiling fans of any sweep and make and fixing in position complete all as specified and as directed.
150
-
-
... More
S & F in repairs mild steel blades of ceiling fan for sweep 1200 mm including nuts and bolts for fixing blades complete all as specified and as directed.
120
-
-
... More
S & F in repairs mild steel blades of ceiling fan for sweep 1400 mm including nuts and bolts for fixing blades complete all as specified and as directed.
30
-
-
... More
S & F in repairs medium protection stove enamelling rigid steel conduit as per IS 9537 (Part-II): 1981, 16 mm nominal size, 600 mm length including painting with super quality synthetic enamel paint of glossy white colour in two coats using spray machine for down rod of ceiling fan complete all as specified and as directed.
150
-
-
... More
S & F in repairs gun metal shaft for ceiling fan of any sweep and fixing in position for smooth functioning of ceiling fan complete all as specified and as directed.
150
-
-
... More
S & F in repairs three core flexible conductor FR-LSH cables for indoor use, PVC insulation of type C and having PVC sheath of type ST2, 1.00 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor for ceiling fan complete all as specified and as directed.
90
-
-
... More
Taking down exhaust fan, any sweep including disconnection of electric connection and dismantling the blades and transporting and depositing to AGE E/M store yard for repair, maintenance, servicing, paintings etc. complete all as specified and as directed.
90
-
-
... More
Collecting repaired, reconditioned, rectified etc. exhaust fan at AGE E/M store yard and transporting to the site an hanging ceiling fan and connecting up including provision of cable from ceiling rose, connectors to fan complete all as specified and as directed.
90
-
-
... More
Disassembling of exhaust fan of size 250 mm/ 300 mm AC 230 Volts, 50 Hz, 900/1400 RPM for repair, removing existing burnt winding wire, bearing/bushes, flexible wire, shaft, check nuts, frame and rewinding with super enamelled copper windings wire of suitable size/ gauge having class "A" insulation and weight not less than 450 gms and replacement of bushes, bearings, shafts, check nuts, bolts and washers, greasing, varnishing and reassembling back complete all as specified and as directed. Note: -(a) The cost of bearings/ bearing shall be included in the quoted rate. (b) rewinding and repair shall be carried out at AGE E/M store yard. (c) The cost of machining work in body of exhaust fan by taking out worn out bearing, boring hole to accommodate ball bearings is included in quoted rate.
90
-
-
... More
M & L for preparation, cleaning exhaust fan of any sweep and any size with moist cloth with detergent powder, scrubbing the old paint with sandpaper, filling cavities with filler and painting with super quality synthetic enamel paint of glossy brown/ black colour in two coats using spray machine and writing MES /Exhaust Fan no with black synthetic enamel paint complete all as specified and as directed.
90
-
-
... More
S & F in repairs louvers iron with shutters suitable for existing exhaust fan of any size and shape at site complete all as specified and as directed.
100
-
-
... More
Cutting hole of area exceeding 150 sqcm but not exceeding 400 sqcm into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete M15 (Nominal mix) using 12.5 mm nominal size coarse aggregate complete all as specified and as directed.
637
-
-
... More
Supply and fix exhaust fan made of sturdy engineering plastic (having excellent impact and abrasion resistance, light weight and resistance to colour change), complete with louvers shutter, voltage 230V, 50 Hz, speed 1200 rpm, 250 mm sweep size, 5 number of blades, air delivery 860 cubic metre per hour, copper winding complete all as specified and as directed.
50
-
-
... More
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, wall light fittings , tube light fittings, surface light fitting , ceiling light fittings , any types of fittings etc. removing materials to store for keeping in safe custody or for taking on credit and making good disturbed surfaces of walls, floors, etc. to match the existing surfaces complete all as specified and as directed.
245
-
-
... More
Taking down concealed copper/aluminium point wiring (light, fan, socket or power) complete without conduit, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, wall light fittings , tube light fittings, surface light fitting , ceiling light fittings , any types of fittings etc. removing materials to store for keeping in safe custody or for taking on credit and making good disturbed surfaces of walls, floors, etc. to match the existing surfaces complete all as specified and as directed.
375
-
-
... More
M & L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
145
-
-
... More
M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
22
-
-
... More
M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
14
-
-
... More
M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board but below the switch board of light points in the same vertical plane complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
10
-
-
... More
M & L for concealed point wiring for one bell/ buzzer point controlled by one push button on the same board with other switches or on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
20
-
-
... More
M & L for concealed point wiring for one light controlled by two 2-way switches complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
8
-
-
... More
M & L for point wiring for one 3 pin/ 5 pin/ 6 pin 5/15 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 2.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the quoted rate.)
26
-
-
... More
M & L for point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing surface or concealed conduit with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.
262
-
-
... More
M & L for point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing surface or concealed conduit with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.
26
-
-
... More
M & L for point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium protection stove enamelling rigid steel conduit as per IS 9537 (Part-II): 1981 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.
18
-
-
... More
M & L for point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board but below the switch board of light points in the same vertical plane complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing surface or concealed conduit with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.
12
-
-
... More
M & L for point wiring for one bell/ buzzer point controlled by one push button on the same board with other switches or on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing surface or concealed conduit with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.
12
-
-
... More
M & L for point wiring for one light controlled by two 2-way switches complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing surface or concealed conduit with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.
9
-
-
... More
M & L for point wiring for one 3 pin/ 5 pin/ 6 pin 5/15 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing surface or concealed conduit with 2.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.
36
-
-
... More
S & F in repairs modular switch, 6A, single pole, one way, one module, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
759
-
-
... More
S & F in repairs modular switch, 16A, single pole, one way, one module, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
129.2
-
-
... More
S & F in repairs modular switch, 6 A, single pole, two way, one module, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
56
-
-
... More
S & F in repairs modular bell push, 6A, 1 module, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
39
-
-
... More
S & F in repairs modular switch socket combination, 3 modules with 3 pin socket outlets, 6A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B and switch, 6 A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
102
-
-
... More
S & F in repairs modular switch socket combination, 3 modules with (3 pin and 3 pin) having two earthing pins, combined socket outlets, 6A & 16A, 3 modules, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B and switch, 16 A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
62
-
-
... More
S & F in repairs Modular fan regulator, 120 W, 2 modules complete all as specified and as directed.
142
-
-
... More
S & F in repairs ceiling roses, 6A, 240 V, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed.
280
-
-
... More
S & F in repairs Bayonet plastic lamp holder, 2 A, 250 V, ordinary, backplate, non-switched, unenclosed, without T marking, B22d with M13 X 1 threaded entry : for the following varieties/ratings: 1) metallic batten type, with backplate fixing, 2A, 240 V AC 2)plastic type, with backplate fixing, 2A, 240 V AC 3)plastic type, made of bakelite, with cordrip fixing
260
-
-
... More
S & F in repairs switch, 6A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
650
-
-
... More
S & F in repairs switch, 16 A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
350
-
-
... More
S & F (3 pin and 2 pin) combined socket Outlets, 6A, 240 V, with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed.
450
-
-
... More
S & F in repairs (3 pin and 3 pin) with common earthing pins, combined socket outlets, 6A & 16A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed.
350
-
-
... More
S & F in repairs step type electronic fan regulator, capacitor type, 100 watt, 240 volts, 50 Hz, single phase, flush type on the existing phenolic laminated sheet complete all as specified and as directed.
20
-
-
... More
S & F in repairs bell push, 6A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed.
150
-
-
... More
S & F in repairs call bell suitable for single phase, AC, 240 volts complete all as specified and as directed.
150
-
-
... More
S & F in repairs double door MCB Distribution board of sheet metal enclosure, single pole and neutral, 8 way with 200 Amps rated bus bar, 240 volt, IP42 protection grade and fixed with PVC plug and screws and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
30
-
-
... More
S & F in repairs double door MCB Distribution board of sheet metal enclosure, single pole and neutral, 12 way with 200 Amps rated bus bar, 240 volt, IP42 protection grade and fixed with PVC plug and screws and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
10
-
-
... More
S & F miniature circuit breakers (MCB), single pole (SP), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed.
150
-
-
... More
S & F miniature circuit breakers (MCB), two pole with one protected pole (SPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6 A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed.
70
-
-
... More
S & F miniature circuit breakers (MCB), four pole with three protected pole (TPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage 415 V three phase, rated frequency 50 Hz, Rated current 63 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed.
20
-
-
... More
Taking down old unserviceable submain wiring 1.5 sqmm or 2.5 sqmm or 4 sqmm or 6 sqmm or 10 sqmm aluminium/copper conductors any number including batten/conduit/ casing capping including removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface to match the existing surface complete all as specified and as directed.
400
-
-
... More
Taking down old unserviceable submain wiring (concealed or surface) 1.5 sqmm or 2.5 sqmm or 4 sqmm or 6 sqmm or 10 sqmm aluminium/copper conductors any number excluding batten/conduit/ casing capping including removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface to match the existing surface complete all as specified and as directed.
730
-
-
... More
Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 4 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 4 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note 1- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2- Cost of cutting chase and making good shall be included in the quoted rate.)
200
-
-
... More
Supply and fix sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 4 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing conduit/ casing/capping and fixed on walls and 4 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and as directed. Note - Two runs of 4 sqmm cable, one run of 4 sqmm cable shall be measured and paid as one unit length.
180
-
-
... More
Supply and fix round blank PVC ceiling outlet wall plate covers for 4 inch dia electrical box with necessary plastic clamp and screws complete all as specified and as directed.
220
-
-
... More
Cutting hole of area not exceeding 150 sqcm into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete M15 (Nominal mix) using 12.5 mm nominal size coarse aggregate complete all as specified and as directed.
45
-
-
... More
S & F modular white cover plate with frame, 2 modules complete all as specified and as directed.
15
-
-
... More
Supply and fix metal flush box 1 or 2 module complete all as specified and as directed.
15
-
-
... More
S & F in repairs modular white cover plate with frame, 2 modules complete all as specified and as directed.
30
-
-
... More
Supply and fix in repairs metal flush box 1 or 2 module complete all as specified and as directed.
30
-
-
... More
S & F modular white cover plate with frame, 3 modules complete all as specified and as directed.
20
-
-
... More
Supply and fix metal flush box 3 module complete all as specified and as directed.
20
-
-
... More
S & F in repairs modular white cover plate with frame, 3 modules complete all as specified and as directed.
50
-
-
... More
Supply and fix in repairs metal flush box 3 module complete all as specified and as directed.
50
-
-
... More
S & F modular white cover plate with frame, 4 modules complete all as specified and as directed.
10
-
-
... More
Supply and fix metal flush box 4 module complete all as specified and as directed.
10
-
-
... More
S & F in repairs modular white cover plate with frame, 4 modules complete all as specified and as directed.
20
-
-
... More
Supply and fix in repairs metal flush box 4 module complete all as specified and as directed.
20
-
-
... More
S & F modular white cover plate with frame, 6 modules complete all as specified and as directed.
6
-
-
... More
Supply and fix metal flush box 6 module complete all as specified and as directed.
6
-
-
... More
S & F in repairs modular white cover plate with frame, 6 modules complete all as specified and as directed.
12
-
-
... More
Supply and fix in repairs metal flush box 6 module complete all as specified and as directed.
12
-
-
... More
S & F modular white cover plate with frame, 8 modules complete all as specified and as directed.
6
-
-
... More
Supply and fix metal flush box 8 module complete all as specified and as directed.
6
-
-
... More
S & F in repairs modular white cover plate with frame, 8 modules complete all as specified and as directed.
12
-
-
... More
Supply and fix in repairs metal flush box 8 module complete all as specified and as directed.
12
-
-
... More
S & F in repairs (3 pin and 2 pin) combined modular socket outlets, 6A, 2 modules, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed.
25
-
-
... More
S & F in repairs (3 pin and 3 pin) with common earthing pins, combined modular socket outlets, 6A & 16A, 2 modules, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed.
67
-
-
... More
S & F modular lamp holder, insulated body with modular straight back plate suitable for batten fittings all as specified and as directed.
200
-
-
... More
M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.
15
-
-
... More
S & F in repairs including testing LED batten light fitting 1 X 20 watt with aluminium housing and polycarbonate diffuser complete with integrated LED driver suitable for fixation on wall/roof with robust body, corrosion resistant, flicker control, superior finish. The power factor should be more than 0.95, total harmonic distortion (THD) should be less than 20%, lumen efficacy should not be less than 100 lumens per watt, total input voltage range 140-280V AC, colour rendering Index should not be less than 80, corelated colour temperature should 5000⁰-6500⁰ Kelvin, including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
450
-
-
... More
S & F LED tube light fittings nominal power 10 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen output of minimum 1000, lumen efficacy of minimum 100 lumens per watt, integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2 KV, protection grade IP 20, CRI greater than 80%, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95, extruded polycarbonate housing, life span of minimum 25000 working hours as per catalogue No. LHEXBTP7IN1W009 of Havells or equivalent of Make mentioned under Appendix "B" complete all as specified and as directed.
100
-
-
... More
S & F LED bulkhead, surface mounting, nominal power 10 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen output of minimum 950, lumen efficacy of minimum 95 lumens per watt, integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 4 kV, protection grade IP66, CRI greater than 80%, CW available CCT of 5700⁰K, power factor of minimum 0.90, polycarbonate housing, life span of minimum 50000 working hours as per catalogue No. HEXAFT10WLED857SSYMBOPC of Havells or equivalent of Make mentioned under Appendix "B" complete all as specified and as directed.
90
-
-
... More
S & F in repairs sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with two pin & earth plug and socket complete with MCB SP 20 Amps 240 volts complete all as specified and as directed.
80
-
-
... More
S & F in repairs decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 9 W LED filament lamp as per catalogue No. LHFOAID1TZ1I040 of Havells or equivalent of Make mentioned under Appendix "B" including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
250
-
-
... More
S & F in repairs round surface mounting 12 watt minimum capacity LED downlighter as per catalogue No. LNRO02R012SC of Jaquar or equivalent of Make mentioned under Appendix "B" including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
100
-
-
... More
S & F in repair metal clad plug top (AC's) suitable for (2 Pole & Earth) 20 Amps, 250V including removing the unserviceable items complete all as specified and as directed.
45
-
-
... More
S & F in repair metal clad socket (AC's) suitable for (2 Pole & Earth) 20 Amps, 250V including removing the unserviceable items complete all as specified and as directed.
45
-
-
... More
S & F in repairs double door MCB Distribution board of sheet metal enclosure, triple pole and neutral, 4 way with 200 Amps rated bus bar, 415 volt, IP42 protection grade and fixed with MS hold fast and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
8
-
-
... More
S & F MCCB rated current(In): 63A, ultimate short circuit breaking capacity (Icu): 10 kA, service short-circuit breaking capacity (Ics): 100% of Icu, impulse withstand voltage (Uimp): 8 kV, insulation voltage (Ui): 690 V, utilization category: A, pollution degree 3, degree of protection: IP40, fixed thermal and fixed magnetic setting, four pole, suitable for 415 V, 50 Hz AC supply complete all as specified and as directed.
8
-
-
... More
Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 6 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 6 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly including cost of cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete all as specified and as directed. (Note 1- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2- Cost of cutting chase and making good shall be included in the quoted rate.)
200
-
-
... More
Supply and fix sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 6 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through existing conduit/ casing/capping and fixed on walls and 6 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and as directed. Note - Two runs of 6 sqmm cable, one run of 6 sqmm cable shall be measured and paid as one unit length.
550
-
-
... More
S & F dummy modular type blank plate for modular switches complete all as specified and as directed.
65
-
-
... More
S & F in repairs pressure release valve 15 mm dia for geyser complete all as specified and as directed.
50
-
-
... More
S & F in repairs geyser heating element 2000 watt suitable for water heater of any type, size complete all as specified and as directed.
150
-
-
... More
S & F in repairs thermostat/cut off of geyser suitable for any type, size, capacity, Make etc. complete all as specified and as directed.
100
-
-
... More
S & F in repairs three core flexible conductor FR-LSH cables, PVC insulation of type C and having PVC sheath of type ST2, 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor complete all as specified and as directed.
75
-
-
... More
S & F in repairs indicating lamp round type suitable for Geyser complete all as specified and as directed.
50
-
-
... More
S & F in repairs stainless steel inner assembly complete with water inlet & outlet, rubber gasket, nuts and bolts and washers of required size suitable for 25 litre capacity geyser of any type and Make complete all as specified and as directed.
40
-
-
... More
S & F in repairs glass wool for geyser vessel of any size and capacity complete all as specified and as directed.
5
-
-
... More
S & F in repairs mild steel holding/anchor bolts and nuts machine made of size 10 cm to 15 cm long and dia of bolt 10 mm to 15 mm complete all as specified and as directed.
150
-
-
... More
S & F in repairs inner tank of geyser capacity 25 litre made out of 16 SWG sheet Steel suitable for geyser of any type and make to match the existing size and shape of inner tank of geyser installed at site complete all as specified and as directed.
40
-
-
... More
S & F in repairs outer tank of geyser made out of galvanised sheet of existing gauge, shape including top and bottom cover plate complete suitable for inner tank 25 litre capacity geyser of any Make complete all as specified and as directed.
40
-
-
... More
S & F stainless steel braided flexible connection pipe for hot and cold water supply for geyser, 15 mm bore, 450 mm length, 12 bar working pressure complete all as specified and as directed.
200
-
-
... More
S & F in repair plug top 3 pin 15 to 20 Amp 230 volt AC, 50Hz complete all as specified and as directed.
40
-
-
... More
S & F in repairs bottom split inspection cover of 25 litre geyser of any Make complete all as specified and as directed.
40
-
-
... More
S & F in repairs single core flexible conductor FR-LSH cables, PVC insulation of type C and having PVC sheath of type ST2, 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor laid in existing conduit complete all as specified and as directed.
500
-
-
... More
S & F in repairs single core flexible conductor FR-LSH cables, PVC insulation of type C and having PVC sheath of type ST2, 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor laid in existing conduit complete all as specified and as directed.
400
-
-
... More
S & F in repairs medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983, nominal size 20 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.
55
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%