Military Engineer Services Tender

Description all as per item No. 3.0 here-in-before but for One Light point controlled by two, two way switches with cables 1.5sqm size complete all as specified and directed.

Supply and fixing modular type switch 1 way 6Amp, 230Volts 1 modle complete all as specified and directed.

Supply and fixing modular type switch 2 way 6amp, 230Volts 1 modle complete all as specified and directed.

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 6 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed including taking down old unserviceable submain wiring. Note:- Two lengths of 6 Sqmm cable, one length of 6 Sqmm cable and one length of PVC conduit will be measured as one length.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F sheet metal enclosure distribution board SP&N, 08 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar,nd making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified & directed.

S & F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked for fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB

S & F MCB SPN, 32 Amps 240 Volts , 'C' curve, 10 KA, complete all as specified and directed. Note :-Make of MCB shall be same of that DB.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified and directed including taking down existing u/s earthing all as specified & as directed. Note :- PCC chamber shall be constructed at least 1.5m away from the earth electrode and pipe for watering shall be provided in slanting manners.

Supply and fixing in repairs decorative wall light, stainless steel rust free fixture with white glass diffuser including 10 watt capacity minimum LED filament lamp complete all as specified and directed. Make : Havells Voila wall Light or equivalent of makes

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

Supply, fixing and testing in replacement of factory made sheet metal enclosure, powder coated, indoor type suitable for wall / floor mounting (incl all arrangement for fixing) made out of 2mm thick CRCA sheet having independent compartments suitable for incomer MCB, refixing of 04 Nos x Single Phase energy meter and S&F outgoing 04 Nos x MCB SPN and one set of indicator lamp, provided with front hinged shutter with lockable arrangement and clear glass to visualize the meter reading without opening the compartment with sufficient working space min size of box for per each electric meter 300 mm x250mm x150mm, prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of size 6 sqmm from bus bar to each meter compartment (for Phase, neutral and earth wire) and outgoing connections from meter to respective outgoing MCB duly crimped with copper thimbles complete all as specified and directed and consisting of following :- (i) Bus bar for 3 Phase system of 4 x 200 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front openable shutter - 01 Set. (ii) MCB 4 Pole 415 Volts, 63 Amps 10kA - 01 No (iii) MCB SPN 40 Amps 10 KA 'C' curve - 05 Nos(04 for Qtrs and 01 for staircase and Security Light) (iv) Indicators lamps LED in Red/Yellow/Blue colour- 01 Set of three Note :- The quoted rates deemed to be inclusive of removing the serviceable energy meter from old panel and refixing in new pannel complete.

Dismantling of interlocking paver block and keep aside paver block for reuse complete all as specified and directed by Engr-In-Charge.

Providing and laying cement concrete paver block using paver blockusing paver block obtained in dismantling laid in and including 30 mm thick compacted bed of coarse sand having gradation as per IRC SP 63: 2018 and 2 to 4 mm wide joints filled with fine sand having gradation compacting and proper laying of interlocking paver blocks into the sand bedding layer through vibrator compaction by using plate vibretor, filling the joints with sand and cutting of paver blocks as per required size and pattern finishing and sweeping extra sand complete all as specified and directed.

Supplying laying, jointing, testing and commissioning of LT XLPE 35 x 3.5 core insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of the following sizes all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc. Execavation, earhtwork, sand cushioing, cable cover, pipe for cable protection to be measured and paid for separtely) including Dismantling of old LT cables complete all as specified and directed.

Material & Labour for replacement of GI strip 32 mm x 4 mm from test point upto equipment to be earthed with connecting material like nut bolts etc complete all as specified and directed.

Material & labour for replacement of 50 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

Material and labour for making the hole under road and hard standing suitable for laying and inserting pipe upto 100 mm dia any length by trenchless technology, mechanical drill system or Auger system and making the surface good as existing surface.complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out complete all specified.

Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material & labour for Sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified and directed.

Material & labour for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.