Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 99,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_677853_1Tender No
GE (AF) Gurgaon No 1/GUR-56/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
M&L Non–Skid Ceramic Coloured Tiles, size 400X400X7 to 8mm, Laid on floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed.
115
-
-
M&L for Glazed Ceramic Coloured digital Tiles of size 300X450X7mm to 8mm, set on vertical surfaces such as Skirting, Dado, etc, over and including 10mm thick screed bed in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed.
444
-
-
Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including skefolding and all safety measures)
370
-
-
M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling, finished even and smooth w/o using extra Cement complete all as specified and as directed by Engr-in-charge
80
-
-
M&L for 15mm thick rendering in CM 1:6 on brick or concrete wall surfaces, including finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
140
-
-
M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete all as specified and as directed.
155
-
-
Demolition of brick masonry, built in cement mortar of any description all as specified and as directed by Engineer-in-Charge.
6
-
-
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-charge
3.5
-
-
M&L for brick work in Half Brick thick wall with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and as directed by Engr-in-charge
15
-
-
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, hold fast, window cills etc complete all as specified and directed by Engr-in-charge
1.7
-
-
M & L for excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation , laying cables foudation etc. and getting out in soft / loose soil complete all as specified and directed.
64.8
-
-
Returning filling with excavated soil obtained from excavation in layers n exc 25cm including spreading levelling watering and well ramming complete all as specified and as directed.
15
-
-
Demolition/ breaking up Drain Pipes (SGSW), AC/RCC 150 mm to 200 mm dia, Jointed in Cement Mortar of any description including demolition of PCC of the Pipes with Bed, complete all as specified and directed by Engineer-in-Charge.
80
-
-
M&L for reinforced cement concrete pipe 150 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.
40
-
-
M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.
40
-
-
M&L for PCC (1:3:6) Type C2 (40mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 150mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.
35
-
-
M&L for PCC (1:3:6) Type C2 (40mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.
35
-
-
M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.
193
-
-
S&F in repairs, SFRC MH Frame with cover of size 650mm dia x 70mm thick surrounded with steel strip 70x1mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing Man Hole complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole Or make approved in MES. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.
5
-
-
S&F in repairs, SFRC MH Frame with cover of size 600mm x 600mm x 70mm thick surrounded with steel strip 70x1mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing Man Hole complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole Or make approved in MES. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.
10
-
-
All as per item No 23 above but for Gulley Trap frame & cover of Size 300x300x50mm -ditto-.
10
-
-
Demolition of Cement Concrete (un-reinforced/reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.
18
-
-
M&L for 15 mm thick rendering in CM 1:4 on brick/concrete internal and external surfaces of wall and roof. and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.
20
-
-
Supply only liquid water proofing compound complete all as specified and as directed.
3
-
-
M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate)as in plinth protection and court yard, finished cement surfaces even and smooth without using extra cement in panels and providing grooves complete all as specified.
30
-
-
S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors including Taking down unserviceable Steel Water Tubing with Fittings and Connections, and removing to store etc., complete all as specified and as directed.
110
-
-
S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors including Taking down unserviceable Steel Water Tubing with Fittings and Connections, and removing to store etc. complete all as specified and as directed.
50
-
-
S&F Galvanised Steel Water Tubing 25mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors including Taking down unserviceable Steel Water Tubing with Fittings and Connections, and removing to store etc. complete all as specified and as directed.
50
-
-
S&F of CPVC SDR 11 pipe 20mm dia fixed to concealed/wall, ceilling,laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Chase cutting, Taking down unserviceable 15mm dia Steel Water Tubing with Fittings and Connections, repairing concealed portion etc., complete all as specified and as directed.
50
-
-
S&F of CPVC SDR 11 pipe 25mm dia fixed to concealed/wall, ceilling,laid in floor etc incl all fittings fixed with solvant and brass threaded fittings for fixing Taps/GI Pipe including Chase cutting, Taking down unserviceable 20mm dia Steel Water Tubing with Fittings and Connections, repairing concealed portion etc., complete all as specified and as directed.
60
-
-
S&F brass CP fency Pillar Taps 15mm Bore, Cast Copper Alloy with Capstan Heads, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe aincluding all fittings, complete all as specified and as directed.
14
-
-
S&F Luxury Bathroom Vanity Washbasin Cabinet with Mirror floor mounted, moveable or fixed with drayers as per site requirement with 32mm dia Brass Chromium Plated Waste Fitting including granite stone of thickness 18-20mm of desired colour and fancy type CP pillar tap and all fittings as required at site for smooth funtioning, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed by Engr-in-Charge.
6
-
-
S&F Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.
6
-
-
S&F Fancy type two way brass bib tap 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.
21
-
-
S&F Vitreous China Wash down Water Closet Pan Colour or White composit type including Attached Flush tank up to 6 to 10 ltr water capacity, push button flushing system and fixing Bolts with Plastic Water Closet Seat cover, recessed bottom including Mild Steel Chromium Plated Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.
10
-
-
Vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with and including ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including Taking out unservice able WC Pan and connected Items, complete all as specified and as directed.
2
-
-
S&F in repairs PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, Removing to store complete all as specified and as directed.
2
-
-
S & F in repair vitrous china half stall urinals white or colour with Brass CP Spreader and water connection as directed complete including fixing all accesary and screw etc. pointing around urinal and PVC waste pipe suittable for urinal pot complete all as specified and directed.
10
-
-
S&F Angle Stop Cock 15mm Bore (dia), Brass Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. Make :- Cat No PSP-504 of Prima/ARG-404 of Coronet or Equivalent of Cera/Johnsen/Jaguar/Marc.
35
-
-
S&F Liquid Soap Dispensor with holder, fix in wall with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish/Dispensor of any description, complete as all specified and directed.
15
-
-
S&F Brass CP Health Faucet with 1.00m long tube and holder as Approved, including Taking down un serviceable Health Faucet of any description, complete as all specified and directed. Make :- Cat No PHF-4307 of Prima/ALD-CHR-563 of Jaguar or equivalent of Cera/Johnsen/Marc.
10
-
-
S&F SS Chromium Plated 20mm dia Towel rack 600mm Long, as Approved, fixed including Taking down un serviceable Towel Rail of any description, complete as all specified and directed.
10
-
-
S&F SS Chromium Plated 20mm dia Towel ring 300mm dia, as Approved, fixed including Taking down un serviceable towel Rail of any description, complete as all specified and directed.
10
-
-
S&F stop valve CP 15mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed
10
-
-
S&F stop valve CP 20mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed
11
-
-
M&L for Refixing Old Wash Hand Basin any size, including replacement of old 32mm dia Brass Chromium Plated Waste Fitting, UPVC Bottle trap, 32mm bore UPVC Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and as directed.
2
-
-
S&F High pressure PVC connections pipe 600mm long suitable for 15mm size with Brass CP Check nut complete all as specified and directed by Engr-in-Charge.
26
-
-
Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortar up to 100 mm dia and removing from site complete all as specified and directed
70
-
-
S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls and floor complete all as specified and directed .
40
-
-
S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls and floor with cement joint complete all as specified and directed
30
-
-
S&F 75mm dia CI bends with oval access door, diminishing pieces or tapers complete all as specified and directed .
10
-
-
S&F 100mm dia CI bends, diminishing pieces or tapers complete all as specified and directed .
10
-
-
S&F 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and directed
10
-
-
S&F 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and directed .
10
-
-
M&L for replacement of 75mm outlet CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and as directed by Engr-in-Charge
22
-
-
S&F 75mm dia CI slotted Vent Cowl complete all as specified and directed .
10
-
-
S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 75 mm dia pipe and fixed to wall complete all as specified and as directed.
10
-
-
S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 110/100 mm dia pipe and fixed to wall complete all as specified and as directed.
10
-
-
S&F in repair 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and 20mm brass float valve complete all as specified and directed by Engr-in-charge .
5
-
-
Taking down existing water tank of capacity 250 to 500 ltrs and refixing after necessary water proofing treatment and other maint work on roof complete all as specified and as directed
2
-
-
S&F in repair 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and 20mm brass float valve complete all as specified and directed by Engr-in-charge .
5
-
-
S&F in repair 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and 20mm brass float valve complete all as specified and directed by Engr-in-charge .
5
-
-
S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed by Engineer in charge.
10
-
-
S&F 20 mm Bore gun metalGlobe/Gate valves with iron wheel/Lever half turn fixed in GI pipe line complete all as specified and as directed by Engineer in charge.
11
-
-
S&F looking mirror 600x450x6mm of selected quality glass mounted on PVC cabinet and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engr-in-Charge. MAKE: ATUL/MODI GUARD/SWASTIK.
7
-
-
S&F of 6 to 8 mm thick electrictal looking mirror of rectangular /square/oval /circular shape of size exc. 0.27 sqm but n. exc 0.45 sqm with three light mode as required including all fittings and make good of all surface complete all as specified and directed by Engr-in-Charge.
6
-
-
S&F in repair, 6mm thick Glass shelf (22x6") with Brass CP Bracket with brass nut, complete all as specified and directed by Engr in charge. Cat part No- ES01A of make-Nixo/hilife or equivalent out of makes specified in list of makes.
12
-
-
S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge.
10
-
-
S&F in repairs 4mm thick pin headed type glass, ordinary quality and glazing clip, rupper biding in square n exc 0.5 sq. m in each pane complete all as specified and as directed.
5
-
-
M&L for 25mm thick Black granite Polished (Both Side) with rounded edge, fixed to wall by cutting and pinning and making good in CM 1:3 as in Urinal Partition complete as specified and directed by Engr-in-charge
5
-
-
S&F in repairs for Brass Hat Peg Set of Six, Solid body, 75 mm to 100 mm complete all as specified and as direceted.
15
-
-
Demolition of wall and ceiling boards (Fibre, pulp, insulation etc.) or insulation board / slabs any thickness including cover fillets complete all as specified and directed.
75
-
-
M&L for suspended false ceiling consisting of suitable GI sections of ‘T’ Angle & FI as per Std engineering practices with ‘E’ board classic ceiling boards 4mm thick in grid of 0.60x0.60mtr including cutting holes and making good holes for main joints, suspending with 4mm dia GI wire to roof slab, roof trusses, purlins & rafters etc and all as per approved and as directed
75
-
-
Taking down door/window frame with shutter of area n exc 1.50 sqm each and removing from site complete all as specified and directed.
19
-
-
Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and as directed.
10
-
-
M&L for 30mm thick block board flush shutter with 0.90mm thick Sun Mica/lamination on both sides and 2nd class hard wood lipping alround including mortice Lock with Round Knob fixed in position and fixed to chowkats complete all as specified and directed by Engineer-in-Charge.
20
-
-
S&F PVC Solid moulded Architrave Door Frame of Size 50X47mm & more made out of min 5.0mm Coloured with Plastic Trim decorated PVC Sheet Reinforced with Mild Steel Square Tube as specified as per Manufacture’s Instructions complete all as specified and as directed.
70
-
-
S&F Factory Made PVC Solid moulded Architrave Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed.
20
-
-
S/F 150mm long Aluminium anodised handles, cast type complete all as specified and as directed.
50
-
-
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.
50
-
-
S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed.
75
-
-
S&F in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
10
-
-
Taking down steel ventilators up to 4 story building complete all as specified and directed by Engr-in-Charge (Note: Distrubered area must be plastered and match with existed colour including putty .)
15
-
-
S&F Aluminium colour powder coated (shade or tint as directed by GE) window frame of using Jindal or equivalent section No 20032 (61.85x31.75x1.50mm) fixed with thrust bolt in walls by drilling for half bottom and top half with top hung shutter using suitable section with 4mm thick tinted glass complete all as specified and as directed.
5
-
-
Demolition of stone slab and tiles fixed with bedded and jointed of any description complete all as specified and directed.
48.2
-
-
M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
382
-
-
M&L for sand filling under floors or in foundations including watering and consolidation for 50mm thick & in trenches below and around under ground cable cushioning complete all as specified and directed.
7.7
-
-
M&L 60mm thick Machine pressed precast concrete inter locking paver block M-35 Grade any shape and size with Grey cement and no pigment conforming to IS 15658-2006 over sand cushioning complete as specified and as directed.
182
-
-
Fixing only old interlocking paver block obtained from dismantled, over 50mm thick sand cushioning complete as specified and as directed.
50
-
-
M&L in repair for Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed colour, Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:4) as in Path, complete all as specified and as directed.
50
-
-
M&L for Complete removal of existing treatment from wall/ceiling etc by scrapping, wire brushed and preparing old plastered/New plastered wall surface and applying two coats of distemper oil emulsion by Auto Roller over a coat of primer including applying 2 to 3mm thick wall care birla putty punning complete all as specified.
295
-
-
Removing of old debris obtained from excavation/demolition building material to a distance exc 10 Km but n exc 15 Km and deposited out side the MD land as per NGT norms complete all as specified and as directed. Note :- Searching of Place of Disposal out side the MD Land will be the responsibility of Contractor and rate of any distance shall be included in quoted unit rate.
33
-
-
Dismantling of wall and ceiling boards or panelling of any description (Fibre, pulp, insulation, wooden etc.) or insulation board / slabs any thickness including cover fillets complete all as specified and directed.
50
-
-
M&L for providing and fixing false ceiling at all heights with fully perforated 12mm thick microtegular edged or 10mm thick square edged glass fibre reinforced Gypsum false ceiling tiles ofsize 595x595mm of approved texture,designand pattern having moisture content less than 2% humidity resistance of 99% ,NRCO 0.50 to0.75 as per IS 8225:1987,Noncombustible as per BS 476(part-4)-1970 and light reflectance of 85%(minimum) to laid in true horizontal level suspended on locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick(galvanised @120mm grams per sqm including both sides ) comprising of main T runners of size 15x32mm of length 3000mm,cross-T of size 15x32 of length 1200mm and secondary intermediate cross T of size 15x32mm of lenght 600mmto from grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm)ie 50mm long,8mm outerdiameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm lenght and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws.The work shall be carried out as per specifications, TD/ STD drawing and as per directionsof the Engineer-in-charge.
50
-
-
M & L for brick work with sub class 'B' Bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 as in man holes/drain complete all as specified and directed.
13
-
-
M&L for 15 mm thick rendering in cement mortar 1:6 by using manufacture/washed plaster sand on other than fair faces of brick or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
87
-
-
M&L for preparation of plastered surfaces of wall and any other surfaces and two coats of OBD over 1 to 2mm thick wall care putty and primer as required after complete removal of existing treatment/newely plastered surface all as specified and directed by Engr-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)
70
-
-
M&L for Parking outdoor coloured tiles dark shade, 12 to 16 mm thick (square/rectangular) polished, area 400mmx400 mm of each tile , inparking etc.,set and jointed in neat cement slurry over 20 mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor fineshes including patch work etc all as specified and directed by Engr in charge .
150
-
-
M&L for machine pressed precast concrete interlocking paver block glossy finish, any shape & size with grey cement & pigment conforming to IS 15658-2006 of 60 mm thickness M-35 grade over 25mm thick sand cushioning, complete all as specified and as directed by Engineer-in- Charge.( note : sand cushioning measured and paid separately)
50
-
-
Taking down chowkhat or frames with shutters of any description (without taking off shutters from the frame) n.exc. 1.5 Sqm each all as specified and as directed.
3
-
-
S&F aluminium coloured power coated (shade or tint as directed by GE) Side Hung or sliding window02 or 03 track/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per specified. (b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per specified. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per specified. (e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per specified. (f) Tinted /coloured glass 5 mm thick with solar control film fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with "H" Section. Note : In case of ground requirement for sliding window/AC window contractor should provide the same as per direction of Engineer-in-Charge nothing extra shall be paid to contractor on this account.
13.6
-
-
S&F 16 to 18 mm thick coloured PVC panel for kitchen cabinet pasted with adhesive as in cupboard, cup board partition, shutter and shelves etc. fixed with screws, complete including necessary pocket hinges, magnet Catcher and handle screw and fixing items for wall/ floor and cup boards etc complete all as specified and directed.including frame work and all necessury aluminium fittings (like hinges, handles, hold fast, making good surface, locking arrangement, easy funtioning for sliding/ drayer system) etc complete all as specified and directed.
25
-
-
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
1
-
-
S&F kitchen plate rack made of stainless steel 1mm to 1.5mm thick for kitchen with all fittings and waste pipe; including making good surface in cement mortar to disterbed portion complete all as specified and directed by Engr in Charge
1
-
-
S & F vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor finishes including patch work etc all as specified .
15
-
-
M&L for 20mm thick Granite (of any type) work (table rubbed and polished, rounded and chamfered ) as in steps, jambs, pillars, window- cills, cooking platforms in full length upto 3.00 mtr and laid over and including 10 to 15 mm thick cement mortar (1:4) including pointing in white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite & making hole for gas pipe where required including patch work etc complete all as specified and as directed.
3
-
-
S&F of fixed safe on walls with MS Frame and shutter single or double leaf or sliding with 1.25 mm MS Sheet board of superior quality with panels,rollers fabricated including superior quality painting of 3 coat including all hinges, handles, locking arrangement with biomatric system if required as approved by GE/Engr in charge, all as complete and directed by engr in charge. This item includes rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size and make good of surface. Note:- Measurement should be done of front face only.
8
-
-
M&L for preparing new plastered walls surface and applying two coat of exterior emulsion paint 100% acrylic of approved colour over a coat of primer including 1 to 2 mm thick birla putty punning complete all as specified and directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding upto 4th floor.
100
-
-
Surface excavation n .exc 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.
12
-
-
Material and Labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation , filling and mass concrete complete all as specified and as directed.
1.8
-
-
M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new and old plastered surface complete all as specified and as directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding upto 4th floor.
17
-
-
S&F PVC SWR pipe 110mm dia single socketed in length laid in trainches or in floors complete all as specified and as directed.
40
-
-
Excavation in post holes not exc 0.5 Cum, getting out, returning filling in layers n exc 25cm in thickness and removing surplus soil to a distance n exc 50 surface in Soft/Loose soil, complete all as specified and as directed by Engr-in-Charge.
6
-
-
M&L for PCC 1:3:6 type C-2, (40mm graded Stone aggregate) as in Foundation ,filling and Mass Concrete complete all as specified and as directed.
2.5
-
-
M&L for Mild Steel Structural Work as in steel gate, Stanchion and Column, post including covering plate from Steel Sections conforming to Fe-410-0 or Fe-310-0 including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed.
410
-
-
M&L for pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge and Valley/Gutter fixed with self tapping screw including rubber washer complete all as specified and directed by Engr-in-Charge.
70
-
-
M&L for 150mm thick PCC 1:2:4 type B2 Ready mix concrete using 40 mm graded stone aggregate as in floor/hard standing in line and level and laid in alternate panel including tamping and top surface make rough, while the concrete is green complete all as specified and directed.
12
-
-
M&L for Stainless steel framed work railing, grill, grating, drain cover etc complete all as specified and as directed.
200
-
-
M&L PCC 1:4:8 type D-2 as in drain etc all as specified and directed by Engr-in-Charge
5.6
-
-
M&L brick work with Fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified and directed by Engr-in-Charge
37
-
-
M&L PCC 1:3:6 type C-2 as in surface channel for drain complete all as specified and directed by Engr-in-Charge
1.4
-
-
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitered/stopped ends etc. complete all as specified and directed by Engr-in-Charge.
50
-
-
Removing excavated material n exc 50 m & deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.
44.8
-
-
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed.
1864
-
-
M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth and applying 2 coats of synthetic enamel paint over one coat of red oxide oxide primer as specified and directed by Engr-in-Charge.
43
-
-
S&F Aluminium powder coated fixed partition using medium weight aluminium section powder coated of horizontal members size 63.50x38.10mm at 0.90kg/m . C/C spacing shall not exceed 0.90m. Vertical member size 63.50x38.10mm at 0.90kg/m. C/C spacing shall not be more than 0.90m. Space between aluminium members should be filled with 18 to 19 mm thick prelaminated particle board, interior grade with decorative choice laminations both sides incl necessary clips ,rubber beading ,aluminium beading and fixing to adjoining walls etc. with all necessary fittings all as specified and directed
35
-
-
M&L Cement Concrete type B1,1:2:4 (20mm Graded Stone Aggregate) 25 mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces Even and fair with using Extra Cement, complete all as specified and as directed.
30
-
-
S&F Centre hole Brass CP mixer for mixing hot & cold WHB Mixer 15mm Bore (dia) screwed down for iron pipe and fixed including taking down unserviceable WHB Mixer of any description, complete as all specified and directed.
5
-
-
S&F Wall Mixer 15mm Bore (dia) brass chromium plated for mixing hot & cold, as Approved, fixing including Taking down unserviceable Wall Mixer of any description, complete as all specified and directed
2
-
-
S&F Brass CP fancy type Bib Cock 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
5
-
-
S&F Angle Stop Cock 15mm Bore (dia), fancy type,Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. Make :- Cera/Johnsen/Jaguar/Marc.
25
-
-
S&F Brass CP Health Faucet with 1.25m long tube and holder as Approved, including Taking down un serviceable Health Faucet of any description, complete as all specified and directed.
5
-
-
S&F stop valve CP 15mm bore(Concealed type), cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed.
9
-
-
S&F in repairs Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) including Bolts, (excluding Flushing Cistern and Flushing Pipe) including seat and seat cover, Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed. (Make :- CERA/PARRY WARE/HINDWARE or equivalent)
5
-
-
S&F in repairs Vitreous China 550*400mm Size Wash Hand Basin White with 32mm dia Brass Chromium Plated Waste Fitting, including Cutting Chase cutting in wall and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.
5
-
-
S&F in repair 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap complete all as specified and as directed by Engineer-in-Charge.
5
-
-
S&F in repair, 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge. Cat No-ES03A of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.
10
-
-
S&F in repair (HDPE) water storage 1000 Ltrs capacity and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unservicable Water Storage Tank including dismantling of old water tank complete all as specified and as directed by Engineer-in-Charge
3
-
-
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore complete all as specified and directed by Engineer in charge.
3
-
-
Supply and Fixing in repairs, Looking Mirror selected quality of size 900 mm x 600 mm x 6 mm thick, having four holes on corners fixed to walls with CP Brass screws with fancy type head top complete all as specified and directed by Engr-in-Charge.
5
-
-
S&F in repair, Brass CP soap dish, complete all as specified and directed by Engr in charge.
10
-
-
S&F in repair stainless steel grating round /circular with waste hole or without waste hole of dia 75mm/ 100mm size of stainless steel complete all as specified and as directed by the Engineer in Charge.
10
-
-
S&F as in repair over head shower 150mm square size cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge .
2
-
-
S&F in repair waste cupling fitting brass chromium plated of 32 mm dia for wash hand basin with long screwed sanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.
5
-
-
M&L for 10 mm thick rendering in CM 1:3 on concrete/gunniting surfaces as in ceiling mixed with integral water proofing compound , the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately..
30
-
-
M&L for preparation of newly plastered surfaces of ceiling by Vacuum based sanding machine complete all as specified, applying wall care putty 3mm thick (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.
30
-
-
S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.
7
-
-
S&F butt hinge extruded aiuminium alloy with galvanised mild steel hinge pin 100mm size, fixed with screw complete all as specified and as directed.
15
-
-
S&F extruded anodised aluminum alloy handle 150mm long fabricated type
10
-
-
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed by Engineer in Charge.
60
-
-
Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces all as specified and as directed by Engineer in Charge
.
60
-
-
M&L for 40 mm thick cement concrete type B0, 1:2:4 (12.5 mm gradded aggregate) including finishing cement concrete even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.
60
-
-
M&L for complete removal of existing roof treatment including PCC pedding etc all as specified and as directed by Engineer in Charge.
60
-
-
E/M SCHEDULE
-
-
-
Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.
80
-
-
Taking down carefully by unscrewing from the boards/outlets boxes fittings and fixtures such as switches, sockets ceiling, rose, lamp holders, tube light fittings, regulators etc and making good of disturbed surfaces
80
-
-
Taking down of existing old unserviceable submain wiring complete all as specified and as directed.
220
-
-
Taking down of existing old unserviceable MCB of any rating complete all as specified and as directed
38
-
-
Taking down of existing old unserviceable distribution board of any type complete all as specified and as directed
11
-
-
Taking down of LED T/L/Ceilling light/Round light/Bulkhed light of any type and capacity complete all as specified and as directed.
26
-
-
Material & Labour for concealed point wiring with single core PVC insulated and unsheathed 1100 volts grade cable with multistranded copper conductor of size 1 .5 Sqmm nominal area drawn through & including non metallic rigid PVC conduit (circular/fiat pvc conduit), medium duty not less than 20 mm dia concealed in wall/fixed on wall/ceiling with GI saddles , G I screws , rawl plugs with all fittings including tees , junction boxes & provision for modular box and modular cover of suitable size for mounting modu lar switches , sockets & regulators & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with copper conductor solid conductor of size 1.5 scimm complete all as specified & directed by Engineer -In-Charge.
Note: Cost for cutting chases and making good to match the existing surface shall be deemed to be included in the quoted rate.
-
-
-
One light point controlled by one single pole switch & socket.
30
-
-
One exhaust point controlled by one single pole switch.
10
-
-
One 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 sqmm
11
-
-
3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size
11
-
-
One 3 pin sockets outlet 15 Amps idependent with cables 2.5sqmm size
18
-
-
One 3 pin sockets outlet 15 Amps idependent with cables 2.5sqmm size
72
-
-
Supply and Fixing modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified & directed by Engineer - In-Charge.
22
-
-
Supply and Fixing of modular switches 1 way, 16 Amp 1 module complete all as all as specified & directed by Engineer - In-Charge.
18
-
-
Supply and Fixing modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified & directed by Engineer - In-Charge.
18
-
-
S&F GI Modular gang sunk-in pressed terminal boxes of required size not less than 1.2 mm thick factory made for following module complete all specified and directed.
Note: Flushing of module box in wall with cement and repairing the wall as before is deemed to be included in quoted rate
-
-
-
Metal flush box 3 module
30
-
-
Metal flush box 6 module
11
-
-
S&F white cover plate with frame of following module complete all specified and directed.
-
-
-
white cover plate with frame 3 module
30
-
-
white cover plate with frame 6 module
10
-
-
white cover plate with frame 8 module
1
-
-
Supply & Fixing of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified and directed.
25
-
-
Supply and fixing LED lights fitting 'Ix 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
12
-
-
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of su itable size complete all as specified and directed at site.
10
-
-
S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one run of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB plug points complete all as specified and as directed.
Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.
Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.
220
-
-
Supply and fix in replacement of factory made epoxy polyster powder coated distribution board double door SP&N 4 way 240V fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings complete all as specified and confirming to 1S: 8623 (Make: Legrand /Siemens).
Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate. Make: Legrand /Siemens/Schneider.
10
-
-
S&F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .Make : Make: Legrand /Siemens/Schneider
26
-
-
Supply and fixing SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of two pole complete with connection testing and commissioning.
11
-
-
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including make hole in complete all as specified and as directed.
10
-
-
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
4
-
-
Supply and fix air circulator wall mounted fan 230 Volts single phase oscillating 400mm sweep suaitable for wall mounting complete all as specfied and directed. Note:- Appropriate nut, bolts for fixing of wall mounted fan will be deemed to be included by rate quoted by contractor.
2
-
-
Supplying and fixing LED Building light 60 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistance complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
3
-
-
S&F in repair bracket made of GI pipe light grade 40mm bore bent to shape as required at site for street light fitting 1.2 m in length and fixed on wall/pole including necessary MS clamps, nuts, bolts etc complete all as specified and as directed.
3
-
-
Supply , Laying , testing and commissioning in replacement of XLPE insulated and PVC Sheathed , galvanized steel strip or wire armoured , heavy duty electric cable with multi stranded aluminium conductor , 1100 volts grade of size 16 sqmm 3 core complete all as specified & directed by Engineer - In - Charge.
50
-
-
M&L for brick protection with sub class 'B' Designation 75 old bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified and as directed.
0.35
-
-
S&F in repair GI pipe light grade 50mm bore in trenches/wall/poles for protection of cable complete all as specified and as directed.
12
-
-
M&L for carrying out horizontal boring below roads/PCC hard standing/Drain suitable Up to 50mm dia GI pipe all as specified as directed for inserting GI pipe of suitable size with a depth upto 1.5m & length of road upto 12m of the follwing size of bore complete all as specified and as directed.
12
-
-
Supply and fix in replacement of factory made epoxy polyster powder coated distribution board double door SP&N 8 way 240V fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings complete all as specified and confirming to IS: 8623 (Make: Legrand /Siemens). Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate. Make: Legrand /Siemens/Schneider.
1
-
-
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.
1
-
-
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
1
-
-
M&L Industrial grade combined plug socket with provision of 32 Amp 240V two pole MCB As per IEC 61439-3 and IK 08 Suitable for Flush Mounting and Surface Mounting complete all as specified and as directed. Make- Legrand cat pail 5078 63 or its equivalent make.
4
-
-
S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one run of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ AC plug points complete all as specified and as directed.
Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.
Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.
80
-
-
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.
2
-
-
S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 1.5 Sqmm single core HR Grade and one run of 1.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ AC plug points complete all as specified and as directed.
Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.
Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.
188
-
-
S&F GI Modular gang sunk-in pressed terminal boxes (metal flush box) 3 module of required size not less than 1.2 mm thick factory made for following module complete all specified and directed.
Note: Flushing of module box in wall with cement and repairing the wall as before is deemed to be included in quoted rate.
11
-
-
S&F White cover plate with frame, 3 module complete all as specified and as directed
11
-
-
S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.
11
-
-
S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.
11
-
-
Supply & fix Air Circulator wallmounted fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting
complete all as specified and as directed. Note -appropriate nut bolts for fixing of wallmounted Fan will be deemed to be included by rate quoted by contractor.
9
-
-
Note :- The amount of Rs 15255/- against Schedule of Credit on Srl Page 143 shall be deducted from the total amount quoted against Sch 'A'
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%