Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 88,720Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_693783_1Tender No
GE(N)/ AMB-72/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply only water proofing compound complete all as specified and as directed by the Engineer–in–Charge.
47.14
-
-
... More
Material and labour for rough cast plaster 15 mm thick in cement motar 1:4 complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied up to height of double storey bldg, including necessary scaffolding etc., complete all as specified and as directed by the Engineer–in–Charge.
230
-
-
... More
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the Engr–in–charge.
23
-
-
... More
Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.
20
-
-
... More
All as per serial item No. 07 here in befor but except bricks (old serviceable bricks obtained from serial item No 06 above including removing motar, cleaning the bricks with water, shall be used), complete all as specified and as directed by the Engineer–in–Charge.
3
-
-
... More
Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan to any radius built in cement mortar 1:4 in half brick thick wall, complete all as specified and as directed by the Engineer–in–Charge.
12
-
-
... More
Demolition of cement concrete (un–reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer–in–Charge.
19.17
-
-
... More
Material and labour for 25 mm thick PCC 1:2:4, type B0, as in hardstanding /floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement complete all as specified and as directed by the Engr–in–charge.
198
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer–in–Charge.
327
-
-
... More
Material and labour glazed ceramic coloured tiles joint free 1st quality in vertical surfaces/ skirtings/dados of size 300 x 600 x 7 mm thick or nearest size as required , set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer–in–Charge.
277
-
-
... More
Material and labour for non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.
18
-
-
... More
Material and labour for non–skid ceramic coloured tiles joint free 1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.
210
-
-
... More
Material and labour for non skid coloured ceramic tiles joint free premium/1st quality of same description as of floor tiles in serial item No 15 above but 100mm to 200mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer–in–Charge.
20
-
-
... More
Material and labour for 10mm thick coloured paver tiles (Endura Tiles) of size 300 x 300mm in floors etc set and jointed in neat cment slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1 :4 ,complete all as specified and as directed by the Engineer–in–Charge.
100
-
-
... More
Material and labour for for granite black (of any type) tiles 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in cement mortar (1:6), as in steps, cooking platform, and including cutting 25mm dia hole for gas pipe and incl rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations of outer edge complete all as specified and directed.
8
-
-
... More
Material and labour for providing 50 mm thick cement concrete 1:3:6 type C–1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete all as specified and as directed by the Engineer–in–Charge.
103
-
-
... More
Material and labour for plain cement concrete 1:3:6, type C–1 (using 20mm graded mechanically crushed stone aggregate), as in surface channels and drains complete, all as specified and as directed by the Engineer–in–Charge.
2
-
-
... More
Material and labour for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, mould, mitred/ stopped end etc complete, all as specified and as directed by the Engineer–in–Charge.
30
-
-
... More
Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge.
48
-
-
... More
Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge.
39
-
-
... More
Material and labour for for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe–410–W (Grade E–250) quality 'A' complete all as specified and as directed by the Engineer–in–Charge.
900
-
-
... More
Supply and fixing flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed by the Engr–in–charge.
42.16
-
-
... More
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58–60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.
53.3
-
-
... More
Supply and fixing factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer–in–Charge.
17.43
-
-
... More
Supply and fixing box type using ERW hollow 'P' section ventilators fixed type with glazing bar including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and as directed by the Engineer–in–Charge.
1.91
-
-
... More
Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :–
(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf .
(c) Vertical mullion shall be ERW hollow T –section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape– 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.
iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leaf vi) Pintal hinges 12 x 75 mm – 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame .
(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.
(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws .
(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.
(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.
Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.
(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.
(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type.
30.64
-
-
... More
Supply and fixing factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part–I, Section–8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and as directed by the Engineer–in–Charge.
26.4
-
-
... More
Supply and fixing in replacement mild steel almirah shutters with frame (two leaves), exceeding 1.5 sqm, made of 1.20mm thick mild steel sheet in two leaves as built in furniture in cupboards including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of spray painting over a coat of red oxide primer complete fixed on brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut embedded in PCC 1:2:4, type B–0, complete, all as specified and directed by Engineer–in–Charge.
10
-
-
... More
Supply and fixing stainless steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with stainless steel wire staple complete all as specified and as directed by the Engineer–in–Charge.
27.34
-
-
... More
Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer–in–Charge.
100
-
-
... More
Supply and fixing 150 mm long aluminium handle cast type anodised complete all as specified and as directed by the Engineer–in–Charge.
112
-
-
... More
Material and labour for sheet glass 3.00mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and as directed by the Engineer–in–Charge.
8.05
-
-
... More
Supply and fixing 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer–in–Charge.
20
-
-
... More
Supply and fixing mild steel 150 mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed by the Engineer–in–Charge.
12
-
-
... More
Supply and fixing mild steel cold rolled butt hinges 100mm long medium weight complete all as specified and as directed by the Engineer–in–Charge.
114
-
-
... More
Supply and fixing stainless steel butt hinges 100mm long medium weight complete all as specified and as directed by the Engineer–in–Charge.
24
-
-
... More
Material and labour for 2nd class hard wood small fitting such a brackets of any type, latch and hinge block, shaped door and window stops and the like including all necessary labours articles not exceeding 200 Cu cm each including 50mm long mild steel cold rolled medium weight but hinge complete all as specified and as directed by the Engineer–in–Charge.
28
-
-
... More
Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer–in–Charge.
6
-
-
... More
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer–in–Charge.
135
-
-
... More
Material and labour for galvanised iron tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer–in–Charge.
135
-
-
... More
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer–in–Charge.
110
-
-
... More
Material and labour for galvanised iron tubing 20 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer–in–Charge.
110
-
-
... More
Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in cement mortar 1:3 to edges of landing, steps, cills, sunshades, shelves, lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exceeding 10 cm girth complete all as specified and as directed by the Engineer–in–Charge.
85
-
-
... More
Supply and fixing 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure scrwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer–in–Charge.
24
-
-
... More
Supply and fixing 15mm bore cast copper alloy chromium plated stop valves, screwed down, high pressure with butterfly handle, scrwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer–in–Charge.
5
-
-
... More
Supply and fixing 20mm bore cast copper alloy chromium plated stop valves, screwed down, high pressure with butterfly handle, scrwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer–in–Charge.
5
-
-
... More
Supply and fixing 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, scrwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer–in–Charge.
4
-
-
... More
Supply and fixing bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engineer–in–Charge.
33
-
-
... More
Supply and fixing fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer–in–Charge.
5
-
-
... More
Supply and fixing brass chromium plated shower rose 125mm size swivel type with arm of standard size as per site complete all as specified and as direced by the Engineer–in–charge.
5
-
-
... More
Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm as in repair complete all as specified and as directed by the Engineer–in–Charge.
20
-
-
... More
Supply and fixing , in repair ,first quality , water closet (squatt pattern) including foot rest , vitreous china (white) ,first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet , complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable complete all as specified and directed by Engineer -in-Charge.
5
-
-
... More
Supply and fixing 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC, complete all as specified and as directed by the Engineer–in–Charge.
5
-
-
... More
Supply and fixing vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and as directed by the Engineer–in–Charge.
5
-
-
... More
Supply and fixing 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, as in repair complete all as specified and as directed by the Engineer–in–Charge.
6
-
-
... More
Supply and fixing water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm bore, high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore as in repair complete all as specified and as directed by the Engineer–in–Charge.
5
-
-
... More
Supply and fixing 110 mm bore PVC (SWR), branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) including jointing with solvent cement, complete all as specified and as directed by the Engineer–in–Charge.
4
-
-
... More
Supply and fixing 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer–in–Charge.
10
-
-
... More
Material and Labour for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete, all as specified and as directed by the Engineer–in–Charge.
4
-
-
... More
Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper with painting roller over a coat of alkali resistant primer over and inlcuding 1mm to 2mm thick wall care putty white cement based in two or more coats to achive smooth surface complete all as specified and as directed by the Engineer–in–Charge.
240
-
-
... More
Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer, complete all as specified and as directed by the Engineer–in–Charge.
526.25
-
-
... More
Material and labour for complete removal of existing treatment on ceiling (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and preparation of surfaces and applying three coats of white lime wash complete all as specified and as directed by the Engineer–in–Charge.
240
-
-
... More
Material and labour for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of cement base paint complete all as specified and as directed by the Engineer–in–Charge.
360
-
-
... More
Material and labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer–in–Charge.
210
-
-
... More
Material and labour for preparation of new/previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer–in–Charge.
100
-
-
... More
Supply and fixing stainless steel curtain rod 25mm dia having wall thickness 1.00mm with and including stainless steel decorative brackets, two lotto for each rod length at both end etc fixed with stainless steel screws as in repair complete all as specified and as directed by the Engineer–in–Charge.
85
-
-
... More
Supplying & Fixing for stainless steel plate rack standard size 786mmx914mm x 264mm complete and fixing with rawl plug and steel screws of weight not less than 8 kg each, complete, all as specified and as directed by the Engineer–in–Charge. Make :– Bluestar /Nirali /Prayag
4
-
-
... More
Supply and fixing of sinks with drainage board made out of stainless steel 1mm thick sheet for kitchen with plugs, waste pipe, brass chromium plated coupling and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 230mm as in repair complete all as specified and as directed by the Engineer–in–Charge.
4
-
-
... More
Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by the Engineer–in–Charge.
635
-
-
... More
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by the Engineer–in–Charge.
47.63
-
-
... More
Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof kerbs, mud stops, padding on roof and finished even and smooth without using extra cement including form work where ever required complete all as specified and as directed by the Engineer–in–Charge.
26.04
-
-
... More
Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bitumious primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temprature and viscosity 70–160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shall be under :–
(i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms.
(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147).
(iii) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only complete all as specified and as directed by the Engineer–in–Charge.
695
-
-
... More
Material and labour for cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in cement mortar (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar 1:6 , complete, all as specified and as directed.
635
-
-
... More
Demolition of reinforced cement concrete in (other than ground floor) roofs, beams staircase, landing, chajja and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by the Engr–in–charge.
5
-
-
... More
Material and labour for TMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed by the Engineer–in–Charge.
220
-
-
... More
Material and labour for TMT steel bars 6 to 8mm dia cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed by the Engineer–in–Charge.
45
-
-
... More
Material and labour for RCC M–25 (design mix) using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer–in–Charge.
2
-
-
... More
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer–in–Charge.
20
-
-
... More
Dismantling boarding of any type or description, any description, fixed in position with nails, screws complete all as specified and as directed by Engineer–in–Charge
30
-
-
... More
Material and labour for 18 mm thick prelaminated HDHMR board exterier grade (grade–1) confirming IS–14587, fixed with screws for kitchen cupboard and cabinet, shelves for cupboard, including 6mm thick 1st class teak hardwood leeping patti on cut edge of boards complete all as specified and as directed by the Engineer–in–Charge.
30
-
-
... More
Supply and fixing continuous (piano) hinges, width of flaps 30mm (when open) mild steel bright finish or electro galvanished complete all as specified and as directed by the Engr–in–charge.
24
-
-
... More
Supply and fixing 100 mm long fancy type stainless steel handle complete all as specified and as directed by the Engineer–in–Charge.
40
-
-
... More
Supply and fixing brass body ball catches with 8mm dia steel ball fixed in cabinet shutter (one portion) and striking plate (other portion) with screw complete all as specified and as directed by the Engineer–in–Charge.
40
-
-
... More
Demolition and breaking up drain pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including excavation, returning filing, removal and cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete, all as specified and as directed.
90
-
-
... More
Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall, complete, all as specified and as directed.
44
-
-
... More
Supply and fixing 75mm bore PVC (SWR) bends of any radius, complete, all as specified and as directed.
10
-
-
... More
Supply and fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall, complete, all as specified and as directed.
55
-
-
... More
Supply and fixing 110mm bore PVC (SWR) bends of any radius, complete, all as specified and as directed.
10
-
-
... More
Supply and fixing 75mm bore PVC (SWR) vent cowl, complete, all as specified and as directed.
5
-
-
... More
Supply and fixing soap dish, 100 mm x 100 mm brass chromium plated, fixed to plugs with chromium plated brass screws as in repair complete all as specified and as directed by the Engineer–in–Charge
9
-
-
... More
Cutting into existing manholes for connecting new drains, and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B–1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 100 mm dia, complete all as specified and as directed by the Engineer–in–Charge.
3
-
-
... More
Material and labour for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and preparation of surfaces and applying two coats of oil bound distemper with painting roller and including 02 mm thick wall care putty white cement based in two or more coats to achive smooth surface complete all as specified and as directed by the Engineer–in–Charge.
139.5
-
-
... More
Material and labour for for RCC M-25 (design mix), (using 20mm graded crushed stone aggregates) as in chajjas and the like complete all as specified and as directed by the Engineer–in–Charge.
2
-
-
... More
Material and labour for for flat formwork to chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges, work in rough finished flat surfaces of concrete, complete, all as specified and as directed by the Engineer-in-charge.
20
-
-
... More
Material and labour for providing cement concrete (1:2:4), Type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer–in–Charge.
3
-
-
... More
Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer–in–Charge.
30
-
-
... More
Supply and fixing 4mm thick tinted glass ordinary quality in square not exceeding 0.50 sqm each pane with glazing clips, rubber gasket or oil putty etc, complete, all as specified and as directed by the Engineer–in–Charge.
0.2
-
-
... More
Supply and fixing double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed, complete, all as specified and as directed.
3
-
-
... More
Material and labour for 12mm thick prelaminated particle board interier grade (grade–1) confirming IS 14587 prelaminated both side with decorative choice lamination and fixed to aluminium door shutter with glazing clips, rubber, complete, all as specified and as directed.
3.9
-
-
... More
Supply and fixing for 100 mm size long mortice lock vertical type, 2 levers with key in duplicate, mild steel body fixed in shutters with screw, complete, all as specified and as directed.
3
-
-
... More
Supply and fixing powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hangung) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws , complete, all as specified and as directed.
Note : (a). Glazing shall be measured and paid separately.
(b). Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured.
(c). The rates quoted shall be inclusive of neoprene beading, glazing clips, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight.
(d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed.
230
-
-
... More
Material and labour for frosted sheet glass 4.8mm thick and glazing with aluminium snap beading, rubber gasket in square not exceeding 0.5 sqm in each pane, complete all as specified and as directed by the Engineer–in–Charge.
15
-
-
... More
Material and labour for PCC 1:3:6 type C–1 using 20mm graded crushed stone aggregate as in holdfasts etc complete all as specified and as directed by the Engineer–in–Charge.
0.45
-
-
... More
Supply and fixing 250 mm long aluminium sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed.
4
-
-
... More
Material and labour double charged vitrified ceramic light shade tiles premium/1st quality 9–10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete, all as specified and as directed.
180
-
-
... More
Material and labour double charged vitrified ceramic light shade tiles premium/1st quality 9–10mm thick of same description as of floor tiles as in serial item No 108 herein before but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete, all as specified and as directed.
30
-
-
... More
Material and labour for 100 mm thick PCC (1:4:8) Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement complete all as specified and as directed by the Engineer–in–Charge.
60
-
-
... More
Supply and fixing vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but including brass chromium plated spreader, PVC waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by the Engineer–in–Charge.
1
-
-
... More
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M–35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
60
-
-
... More
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets and false ceiling frame work of any size/ description complete all as specified and as directed by the Engineer–in–Charge.
210
-
-
... More
Supply and fixing false ceiling with semi perforated 12 mm thick micro tegular edged at all heights with GRG (glass fibre reinforced gypsum) false ceiling tiles of size 595mmx595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%, NRC 0.5 to 0.75 as per IS 8225–1987, non–combustile as per BS475 (part–4) –1970 and light code description unit rate No.429 SUB HEAD :26.0 new technologies and material reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T–Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 gms per sqm including both sides) comprising of main –T runners of size 15x32mm of length 3000mm, cross T of size 15x32mm of length 1200mm and secondry intermediate cross–T of size 15x32mm of length 600 mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @80 gms per sqm) i.e, 50mm long, 8 mm outer diameter M–6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L– Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws complete all as specified and as directed by the Engineer–in–Charge.
210
-
-
... More
Supply and fixing rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, hollow or flat etc other sections) including distance pieces, cleats etc. of Fe–410–W (Grade E–250) quality B complete all as specified and as directed by the Engineer–in–Charge
1960
-
-
... More
Dismantling of plain or corrugated AC sheet of any thickness incl Nainital or similar pattern coverings, complete all as specified and as directed by the Engineer–in–Charge.
330
-
-
... More
Supply and fixing Pre–painted galvalume aluminum zinc coating GI based corrugated manglore tile steel sheet 0.50mm thick,having Zinc coating 150 gm per sqm (Az–150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer–in–Charge. Make :– Colouron+ of JSW or Durashine of TATA or neucolor of Jindal (Note: Manufacturer Test Certificate have to be submitted before start /execution of work).
300
-
-
... More
Supply and fixing Pre–painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having zinc coating 150 gm per sqm (Az–150) as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer–in–Charge.
30
-
-
... More
Dismantling structural steel work including doors, gates, grills and stiffener for securing chain link fencing including nuts, bolts etc but excluding framed trusses etc complete all as specified and as directed by the Engineer–in–Charge.
0.98
-
-
... More
Disconnecting existing tanks of capacity not exceeding 500 ltrs, draining out water, setting aside(or lowering if required) for repairs / cleaning etc., cleaning and removing accumulated sludge/ dirt scales from tank bottom, side and from mouths of circulating pipes of service tank of capacity not exceeding 500 litre, located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground “Cleaned on (date)”, height of words 100 mm, and hoisting if required , re-fixing and reconnecting in position after cleaning, complete all as specified and directed . Note– The whole process of reconnecting and refixing in same position after cleaning/after carrying out water proofing treatment shall be done on the same day to ensure uninterrupted water supply to the occupant, if failing so, Rs. 200/– shall be deducted for each tank per day from the contractor due.
8
-
-
... More
Schedule 'A' Part–II (E/M items)
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc. complete all as specified and as directed by the Engineer–in–Charge.
244
-
-
... More
Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS–H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS–H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches, modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer–in–Charge.
Note :– a) All chases will be cut by chase cutter only.
b) Switch, socket outlet and fan regulators to be measured and paid for separately.
144
-
-
... More
Description all as per serial item No. 122 here–in–before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer–in–Charge.
42
-
-
... More
Description all as per serial item No. 122 here–in–before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed by Engineer–in–Charge.
28
-
-
... More
Description all as per serial item No. 122 here–in–before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS–H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated, unsheathed cable green colour FRLS–H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer–in–Charge.
24
-
-
... More
Description all as per serial item No. 122 here–in–before but for one socket outlet 16 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS–H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated, unsheathed cable green colour FRLS–H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer–in–Charge.
6
-
-
... More
Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed by Engineer–in–Charge.
210
-
-
... More
Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed by Engineer–in–Charge.
24
-
-
... More
Supply and fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed by the Engineer–in–Charge.
4
-
-
... More
Supply and fixing of modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer–in–Charge.
70
-
-
... More
Supply and fixing of modular socket outlet pin combined, (6pin), 6/16 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer–in–Charge.
24
-
-
... More
Supply and fixing as in repair electronic Fan regulator modular 100 watt, 2 modules, 230 volts, 50 Hz, AC supply suitable for ceiling fan any type /make /sweep complete all as specified and as directed by the Engineer–in–Charge.
20
-
-
... More
Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed by the Engineer–in–Charge.
132
-
-
... More
Supply and fixing in repair electric bell, ding dong 230 volt, complete all as specified and as directed by the Engineer–in–Charge.
4
-
-
... More
Supply and fixing in repair, indoor decorative LED tube light fitting box type 18/20 watt with electronic driver, opal diffuser, high efficient aluminium housing body suitable for LED tube, high efficient, AC 220–240 volts, 50 Hz including 18/20 Watt LED tube rod luminaries environment friendly, high efficient, T8 with aluminium extrusion heat sink and connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by Engineer–in–Charge.
28
-
-
... More
Supply and fixing in repair, LED surface mounted bulk head luminaries 8–10 watt with min 800 lumen, industrial model, IP 65, aluminium housing, surge protection including driver and LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer–in–Charge. Cat part No. HEXAFT10WLED857SSYMBOPC of make Havells or equivalent in makes given in Appx 'B'.
11
-
-
... More
Supply and fixing surface mounted wall Mirror LED light Compact & sturdy 10 watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution& applications all accessories & fixtures, internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete all as specified and directed. Cat part No. LUMILINE+ BS10WLED865PCSS of make Havells or equivalent in make given in Appx 'B'.
12
-
-
... More
Supply and fixing in repair, 9/12 watt LED light fitting wall mounting fixture (sketch type) including B–22 LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable from ceiling rose to connector of the light complete including removing unserviceable light fittings complete all as specified and as directed by the Engineer–in–Charge. Cat part No. HLWB–01–B22 of make Halonix or equivalent in make given in Appx 'B'.
12
-
-
... More
Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB 20 Amp, 10 KA 'B' curve including removing old unserviceable enclosure complete all as specified and as directed by the Engr–in–charge. Cat part No. 811955 of make Indo Asian or equivalent in make given in Appx 'B'.
6
-
-
... More
Supply and fix sheet metal MCB DB, SPN 8 way with 200 Amps rated bus bar single pole and neutral with double door IP–54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr–in–charge. Cat part No.811826 of make Indo Asian or equivalent in make given in Appx 'B'.
7
-
-
... More
Supply and fix MCB SP, 6–32 Amps, 240 volt, 10 KA, 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer–in–Charge.
50
-
-
... More
Supply and fix MCB SPN, 32 Amps, 240 volt, 10 KA, 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer–in–Charge.
7
-
-
... More
Taking down ceiling fan, cleaning the same and refixing after cleaning in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed.
20
-
-
... More
Taking down and refixing water heater any type and any size/ capacity with all accessories such as nut bolt washers, PVC pipe etc with making all connection using three core copper conductor flexible cable drawn through in PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed.
4
-
-
... More
Taking down and refixing of serviceable electronic energy meter 5 to 30 Amps capactiy, complete all as specified and directed.
4
-
-
... More
Supply and laying as in repair sub main wiring with two run of 6 sqmm PVC insulated, unsheathed cable FRLS–H, 1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated, unsheathed cable FRLS–H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer–in–Charge.
Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.
315
-
-
... More
Supply and fixing sheet metal enclosure triple pole & neutral (TPN) IP–54 with MCB 63 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr–in–charge. Cat part No. 811856 of make Indo Asian or equivalent in make given in Appx 'B'.
2
-
-
... More
Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth strip 25 x 3mm thick by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 32mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre–cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer–in–Charge and earth testing on completion.
4
-
-
... More
Supply and fixing in repair LED batten fitting 18–20 watt, 4 feet, aluminium housing with electronic driver cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer–in–Charge. Cat part No. LUMILINEPLUSNEOBS20WLED830SPCSSIND of make Havells or equivalent in make given in Appx 'B'.
42
-
-
... More
Supply and fixing LED flat panel 2' x 2' size fully difused surface/ recess mounted fitting (grid/ gypsum type) 36–40 watt, 5700K, warm/cool white with powder coating and CRCA front cover including frame with provision of PVC flexible copper conductor cable from ceiling rose to light fitting as in repair complete all as specified and as directed by the Engr–in–charge. Cat part No. VENUSNEO2X2PLR36WLED857G2 of make Havells or equivalent in make given in Appx 'B'.
12
-
-
... More
Supply and fixing in repair, LED Bldg Security Light Fittings of capacity 20–25 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP–65 protection and other connected accessories including electronic driver and making electrical connection, complete all as specified and as directed by the Engineer–in–Charge. Cat part No. ENDURASUNDOWNSL25WLED765PASYBOTGIHD of make Havells or equivalent in make given in Appx 'B'.
3
-
-
... More
Taking down and reixing only exhaust fan after cleaning in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed.
2
-
-
... More
Supply and fixing sheet metal enclosure Vertical triple pole & neutral (VTPN) IP–54 with MCCB 100 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engineer–in–charge. Cat Part No 811882, of make Indo Asian or equivalent to makes given in Appx 'B'.
1
-
-
... More
Supply, laying, jointing and testing XLPE insulated, armoured heavy duty electric cable 16 sqmm cross sectional area, 4 core with stranded aluminium conductor, 1100 volts grade as in repair complete all as specified and as directed by Engineer–in–Charge.
40
-
-
... More
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and as directed by the Engineer–in–Charge.
6.75
-
-
... More
Supply and fixing light grade GI Tubing of size 32mm dia for cable protection and fixed with clamp to pole and wall with nut, bolts, washers or in trenches as in repair complete all as specified and as directed by Engineer–in–Charge
5
-
-
... More
Supply and fixing light grade GI Tubing of size 25mm dia for cable protection and fixed with clamp to pole and wall with nut, bolts, washers or in trenches as in repair complete all as specified and as directed by Engineer–in–Charge
45
-
-
... More
Material and labour for dry sand cushoning to cable i.e 8 cm before laying cable in trenches and 15 cm after laying the cable and compacting complete all as specified and as directed by Engineer–in–Charge. Note: punned thickness shall be measured for payment.
2
-
-
... More
Supply and laying well burnt brick class–B laid flat to cover the cable with width equal to the length of cable and abutting each other for protection of cable complete all as specified and as directed by Engineer–in–Charge.
0.22
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed by the Engineer–in–Charge.
3.9
-
-
... More
Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed by the Engineer–in–Charge.
2.85
-
-
... More
Note:- Amount of credit of Rs.1,42,944.00 for retrieved materials is mentioned in Schedule of Credit Page No…………………. of tender documents in pdf form which will be deducted offline while acceptance of tender.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%