Military Engineer Services Tender

Material and labour rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and fair without using extra cement complete all as specified and as directed by the Engineer–in–Charge.

M&L rendering 5 mm thick on concrete ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer–in–Charge.

M&L for preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over a coat of chalk whitening complete all as specified and directed.

M&L for preparartion of new wall surfaces & applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layer complet.

M&L for preparation of new plastered surface of ceilling applying three coats white wash complete all as specified and directed.

M&L for applying one coat of oil bound distemper on wall surface, including preparation of old treated/untreated surfaces of walls, cornices etc.by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss, efflorescence salts, trading oil and greasy spots etc, complete all as specified and as directed.

M&L for applying one coat of white washing on ceiling surface, including preparation of old treated/untreated surfaces of walls, cornices etc.by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss, efflorescence salts, trading oil and greasy spots etc, complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on wooden surface including preparation of old painted wooden surfaces of any description over 10cm width or girth complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on steel surface including preparation of old painted steel surfaces of any description over 10cm width or girth, complete all as specified and as directed.

M&L preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of new/old plastered surfaces of wall and applying 1mm thick wall care putty white cement based in two or more coats to achive smooth surface complete all as specified and as directed by the Engineer–in–Charge.

Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer–in–Charge.

M&L 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc complete all as specified and as directed by the Engineer–in–Charge.

M&L providing 50 mm thick cement concrete 1:3:6 type C–1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete all as specified and as directed by the Engineer–in–Charge.

M&L 25 mm thick PCC 1:2:4, type B–0 as in sub base floor (using 12.50mm graded crushed stone aggregate), complete all as specified and as directed by the Engr–in–charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer–in–Charge.

M&L for granite (of any type) tiles 16–18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.

Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 600 x 7 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer–in–Charge.

M&L non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.

Material and labour non skid coloured ceramic tiles premium/1st quality 8-10mm thick of same description as of floor tiles as in serial item No 23 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer–in–Charge.

Supply and fixing as in repair water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including dismantling of water tanks and removing to store all as specified in SSR Part–I complete all as specified and as directed by the Engineer–in–Charge.

Cutting chases in making good to facing where required and pointing in cement mortar 1:3 to end of edges or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tuning or consealed conduit wiring, etc and making good cutting exceeding 20cm girth in brick walls complete all as specified and directed by Engr–in–Charge

M&L galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and as directed by the Engineer–in–Charge.

M&L galvanised iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F vitreous china wash hand basin white, flat back of size 550mm x400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F as in repair brass chromium plated shower rose 100mm size swivel type with arm of standard size as per site suitable for 15mm bore pipe complete all as specified and as direced by the Engineer–in–charge.

S&F vitreous china squatting pan, Orissa pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe as in repair complete all as specified and as directed by the Engineer–in–Charge.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat cover white closed pattern with flat bottom and cover including making connections and fixed in position as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F mild steel chromium plated hand shower (health faucet ABS body) suitable for 15mm dia pipe with 8 mm dia 1.25 mtr long flexible tube and ABS wall hook including making connection as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F as in repair grating doom 100mm dia of stainless steel with or without waste hole complete all as specified and as directed by the Engineer–in–Charge.

S&F 20 mm bore Gun–metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair pvc water closet seat cover, white, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm with 32/40mm bore waste coupling and 32mm bore pvc corrugated pipe 900mm long complete all as specified and directed. Make :– Bluestar /Nirali /Prayag.

Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair 32 mm dia PVC waste pipe for wash hand basin /kitchen sink etc of standard length complete all as specified and as directed by the Engineer–in–Charge.

Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge.

Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge.

Taking down shutters of any description area exc 1.00 sqm and not exc 2 sqm each and removing to or from store complete all as specified and as directed by the Engineer–in–Charge.

Taking down shutters of any description area exc 1 sqm and not exc 2 sqm each and refixing in the same opening complete all as specified and as directed by the Engineer–in–Charge.

M&L rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe–410–W (Grade E–250) quality 'A' complete all as specified and as directed by the Engineer–in–Charge.

S&F factory made flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed by the Engr–in–charge.

Supply and fixing factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters,open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part–I, Section–8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and as directed by the Engineer–in–Charge.

S&F double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :– (a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces. (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf. (c) Vertical mullion shall be ERW hollow T –section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape– 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leaf vi) Pintal hinges 12 x 75 mm – 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame. (viii) Two coat of Synthetic enamel paint over one coat of red oxide primer. (ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws . (x) 4 mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window. (xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above. (iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type.

S&F powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hanging) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws complete all as specified and as directed by the Engineer–in–Charge. Note : (a). Glazing shall be measured and paid separately. (b). Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured. (c). The rates quoted shall be inclusive of neoprene beading, glazing clips, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight. (d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.

S&F factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick plain moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer–in–Charge.

M&L PCC 1:3:6 type C–1 (using 20mm graded crushed stone aggregate) as in holdfasts complete all as specified and as directed by the Engineer–in–Charge.

S&F stainless steel butt hinges 100mm long medium weight complete all as specified and as directed by the Engineer–in–Charge.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer–in–Charge.

S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer–in–Charge.

S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed by the Engineer–in–Charge

Supply and fixing 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer–in–Charge.

S&F mild steel 150 mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair 150mm long aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair 100mm MS butt hinge medium weight cold rolled complete including fixed to angle or steel chowkhats etc complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair 150mm long aluminium, anodised, barrel tower bolt of extruded section complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair 300 mm long aluminium sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and as directed by the Engineer–in–Charge.

M&L welding to grills, guard bars, steel windows, fixing of hinges to steel chowkhats and steel door etc., thickness of metal to be welded exc 6mm and not exceeding 9 mm and exceeding 2.5 cm and not exceeding 5.0 cm in length complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the Engr–in–charge.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.

M&L brick work with sub class 'B' old size bricks using old servicable bricks including cleaning of old bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads complete all as specified and as directed by the Engineer–in–Charge.

M&L sheet glass 4.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer–in–Charge.

S&F 4mm thick frosted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square n exc 0.5 sqm each pane complete all as specified and directed.

S&F galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple complete all as specified and as directed by the Engineer–in–Charge.

S&F galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed to steel/wooden /aluminium window/ frame with tinned tacks or galvanised mild steel wire staple as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F in repair stainless steel tubing of 25 mm dia chromium plated min 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc complete fixed as in repair complete all as specified and as directed by the Engineer–in–Charge. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Demolition and breaking up drain pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed by the Engr–in–Charge.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall complete all as specified and as directed by the Engineer–in–Charge.

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer–in–Charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall complete all as specified and as directed by the Engineer–in–Charge.

S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer–in–Charge.

M&L 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement including fixed in cement concrete as in repair complete all as specified and as directed by the Engineer–in–Charge

M&L for PCC 1:5:10 type E–2 using 40mm graded crushed stone aggrgate as in filling in sunken portion floor, rounded or chamfered on edges including demolition and removing from site complete all as specified and directed.

M&L for sunken floor water proofing treatment complete all as under :– (A) Scrapping the surface with wire brush and cleaning with water and allow to dry. (B) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound. (C) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape). (D) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound. (E) Apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.2 kg/sqm. (F) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm. (G) Applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.20 kg/sqm. (H) Curing the sunken portion with water min 48 hours by ponding. (J) Fixing 50mm bore GI pipe medium grade as in spout of 0.60 mtr length in each sunken.

S&F as in repair PVC tank lid/cover suitable for capacity 500 /1000 ltrs with and including locking arrangments such as nuts, bolts etc complete all as specified and as directed by the Engineer–in–Charge.

Supplying & Fixing for stainless steel plate rack standard size 786mmx914mm x 264mm complete and fixing with rawl plug and steel screws of wt not less than 8 kg each, complete, all as specified and as directed by the Engineer-in-Charge. Make :– Bluestar /Nirali /Prayag.

S&F as in repair mild steel door shutter two leaves with frame of 20 gauge MS sheet (all around) and leaves of 21 gauge MS Sheet (all as per godrej pattern) with three way locking arrangement with brass lock with duplicate key and CP handle including two coats of spray painting over a coat or red oxide primer complete fixed in existing cupboard fixed with necessary nuts, bolts including embedded in PCC 1:2:4 (area of opening shall be measured) complete all as specified and as directed by the Engineer–in–Charge.

Note:- Amount of credit of Rs.2855.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 17 & 18 of tender documents in pdf form which will be deducted offline while acceptance of tender.