Maharshi Dayanand University Tender

FUME HOOD `Make and Brand:- NIYA LABS` TABLE TOP FUME HOOD Specification: Outer Dimension : 1500(L)x 750(W)x 1400(H) mm Inner Dimension : 1200(L)x660(W)x1250(H) mm Sash Opening : 30 Inches Design Basis : Comply to ASHRAE -110 Standard Outer Body : CRCA sheet (20 gauge) epoxy polyester powder coated Inner Lining : Internal lining suitable for acidic fumes Scaffold : Imported (SS) scaffolding racks for fume hood Baffle : Baffle at the back with 3 point suction system (light, normal, heavy fumes) for smooth exhaust of fumes. Sash(Shutter) : Vertical rising Sash movement with counter weight balance mechanism Made of safety toughened glass (5mm) Work Top: 18mm thick dished black granite top with 12mm thick ply having provision to fix drip cup. Air flow: Air flow display with alarm Suction : 800-1000 CFM Electrical Arrangements : NO/NC switch for customer`s blower starter 6/16 Amp. Socket Single Phase -North West Make -04 Nos. 16 Amp. MCB Single Phase -North West Make -04 Nos. Respective internal wiring terminated at fume hood top at rear end for further connection. Fume Hood Utility: Fitted with Raw water -1 nos. With PP sink -01 nos. Illumination : Vapour proof LED light 2 no with switches. Installation of fume hood Fitting of service valves, color coded knobs and Services nozzles made from brass materials Nitrogen -01nos. Vacuum -01 nos.

Installation and Fixing of Blower with ducting of 8`(INCH)(PVC) approx. 5 meter in length Blower: 1 HP Crompton make motor. Housing FRP Suction : 800-1000 CFM Butterfly valve for initial exhaust manual setting.

Providing and installation of gas pipeline for fume hood :- GAS PIPING 1. Dual Stage Cylinder Regulator = 2 Nos. Body: SS Diaphragm : Stainless steel Diaphragm Seal: Teflon Inlet pressure : 0 to 280 kg/cm2 Outlet pressure : 0 to 16 kg/cm2 Gauges: Wika (Germany) Service : Air, N2 2. 1/4` SS316 Tubing with color coded sleeves = 20 Meter 3. Dual Cylinder Manifold with Mounting Bracket = 2 nos Material : Stainless steel 316 Needle Valve : As per IS3224 Service : Air, N2 4. SS Braided High Pressure Pigtail = 2 nos 5.Cylinder Holding Bracket with Chain = 2 nos. 6. 1/4` Ball Vall SS = 2 nos. 7. PVC Cashing = 25 Fts. 8. Hardware and required fittings = 1 Lot 9. Installation = 1 Lot