Kurukshetra University Tender

d. 150 mm dia

Providing, fixing , testing and of commissioning of Butterfly valves PN 1.6 with Bronze / Gunmetal seat duly ISI marked with nuts bolts washers, gaskets conforming to IS 13095 of following sizes as required for the following sizes as required :- Make:-ADVANCE,CASTLE, KIRLOSKAR. (a) 100 MM DIA

(b) 80 MM DIA.

Providing, fixing , testing and of commissioning of dual plate , non-return valve confirming to IS :5312 complete with rubber gasket , GI Bolts , nuts , washers etc as required of following sizes :- Make:-ADVANCE,CASTLE, KIRLOSKAR. (a) 100 MM DIA

(b) 80 MM DIA.

(c) 63 MM DIA

Supply & installation of ISI marked single headed 63 mm dia gunmetal hydrant valve, 80mm dia flanged inlet with 63 mm female instantaneous outlet confirming to IS”5290 on the fire wet riser/down corner, including making 80NB pipe connection with riser along with 100 mm dia dial pressure gauge of calibration 0-15 Kg/sqmm fixing the landing valves in proper positions including supply of nuts, bolts gaskets, caps chains etc, testing the hydrant and completing the work in all respect as per directions of the engineer in charge Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.

Providing and Fixing ISI marked RPL (IS:636 type-A) fire hose pipe 15 meter long and 63 mm dia with ISI marked (IS: 903) gun metal/stainless steel male and female coupling bound and riveted to hose pipes with copper rivets and copper wire complee as required. Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.

Supply fixing testing and commissiniing of 20mm bore and 30meter long hose (high pressure rubber braided hose pipe as per IS:44) and hose reel suitable for 10 kg/sqmm operating pressure for first aid fire fighting conforming to IS:884 with 180 degree full swing Drum, fixing brackets shut off gunmetal, 40mm dia hand lever operated isolating Gun Metal Stop valve connecting directly from the riser through 40 mm dia GI pipe with sockets, elbows nipples etc including providing operating instructions on a metal plate and fixing it near hose reel complete in all respects as per drawings and directions of engineer in charge Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.

Providing gun metal/stainless steel ISI marked 63 mm dia male instantaneous pattern short branch pipes and 20mm dia. Nozzle as per IS:903 suitable for 10kg/sqmm operating pressure and suitable for interconnections to hose pipe coupling as required. Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.

Providing and fixing standard carbon steel fireman axe with rubber insulated handled tested to 20000 volts.Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.

Supply and installation of cast iron body 3 way 63mm dia male instantaneous inlet coupling complete with cap and chain for fire bridgade connection conforming to IS: 904 and making connectin with fire fighting pipe or nder ground water tank, completing the work in all respect as per the directions of the engineer-in-charge. Make:-NEWAGE,VICTOR, MINIMAX, SAFEX.

Providing & fixing indoor type hose lockable cabinet frames fabricated from 40 x 40 x 5 angle iron sections and 16 gauge MS sheet with full front glass door and locking arrangement, suitable to accommodate landing valves, 15 m long hoses, first-aid hose reel and branch pipe nozzle & fire mans’ axe. The cabinet frame shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade of as required (Approx 2.1 m (high) x 0.9 m (wide) may vary as per site shaft size. The item shall be complete of MS housing with front door.

Providing , laying ,testing and coimmissioning of 'C' Class heavy duty M.S pipe confirming to IS 1239/ 3589 i/c fittings like elbows ,tees, flanges, tapers, nuts bolts, gasket etc.in ground including excavation and providing cement concrete blocks, as supports , antocorrosive treatment with coaltar / asphalt tape as per IS 10221, refilling the trench etc. of the following sizes: 100 mm Dia Make:-JINDAL, PARKESH SURYA, TATA

(B)FIRE PUMPS & ACCESSORIES Supply, fixing testing and commissioning of electrical motor driven fire pump, suitable for automatic operation consisting of following :- Horizontally mounted, centrifugal fire pump as per IS: 1520 complete for delivery of under mentioned discharged against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and fartherst outlet at the specified flow complete with necessary strainers, 100mm dia dial pressure gauge of calibratin 0-15 kg/sq cm including by pass arrangement ofor periodic testing of the working of the pumpset as well as testing of automation with required length ad sixe of MS pipe and control valves for proper completion of work. The pump shal be capable of giving 150% of rated discharge at head not less than 65% of rated head. The pump shall be provided with mechanical seals. The impeller shall be enclosed type and accurately balances dynamically. The pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. Make: Kirloskar/Mather+Platt) (b)Squirel cage TEFC induction motor as per IS: 325, suitable for 415 V,3 phase IP 55 protection and class ‘F’ insulation vaccume impregnated windings with heat and moisture resisting varnish for the avove pump and flexible coupling with the pump. The motor shall be rate for continuous duty and shall have HP rating necessary to drive the pump at 150% of its rated discharge at 65% of rated head. (c)Common bed plate of fabricated mild steel channel or cast iron type, coupling, coupling guard ets as required. Discharge: 900 Liter per minute Head: 35 meter Suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts anti vibration pads washers etc. (a). Pressure switch for automatic operation of motor including necessary wiring upto control panel. (Switchgears Make : ABB / L&T / Siemens / Schneider)

Electrical Control Panel in the Pump Room at the Terrace Floor with the following :- Incoming 1 No. Incomer TPN MCCB 100 Amps 25 KA 1 No. Set of 3 Phase Indication lamps 1 No. Multifunction Meter with CTs 100/5 Amps Outgoing 2 Nos Outgoing TP MCCB 63 Amps 25 KA 2 Nos Motor Starter with protection against single phasing , protection against dry suction cutoff including cabling with in the pump House. 1 No. Outgoing TP MCCB 63 A Spare 25 KA MAKE:- ABB/L&T/HAVELLS.

Providing and fixing Air Vessel made of 250mm dia , 8 mm thick MS Sheet , 1200 MM in height , with 25mm dia air release valve with brass isolating ball valve, flanges/union, suitable for sprinkler/wet riser/down comer system with drain arrangement with 25 mm dia Gun Metal Valve with all necessary connections complete in all respects.

PORTABLE FIRE EXTIGUSHERS Fire extinguishers ABC dry powder 6Kg capacity Make:-CEASE FIRE,VICTOR, MINIMAX,SAFEX.

H2O / Co2 9 Ltr Capacity Make:-CEASE FIRE,VICTOR, MINIMAX,SAFEX.

Co2 4.5Kg Capacity Make:-CEASE FIRE,VICTOR, MINIMAX,SAFEX.

Supply of 10 Zone main fire alram panel microcontroller based with its own fire detection zone interface card for initiating and indicating devices and should also be networkable with other panel through RS 485 communication, power supply & battery charger & battery. The panel shall have its own operating system E-PROM for event logging system etc. as required a) Material construction -CRC sheet with powder coating b) Display Type- Display consisting of 80 CHR backlight alphaumeric with 40×2 LCD Display & yellow/green/red LED for fault/isolate/fire c) Kaypad for operation and monitoring display requirement to display all types alarm condition, short, open condition with address & should also indicate time & date with Public Address System including suitable size Ampifier, microphone complete as per specification as required. Make:- Agni Alram/Agni.

Supply of manual call point polymer housing in surface/recess including making connection with wires complete in all respect and as per specification. Make :-Agni Alram/Agni.

Supply, Installation, testing & commissioning of electronic hooter with high quality speaker made out MS sheet or polymer housing complete as per specification as required. Make:- Agni Alram/Agni.

Supply, Installation ,testing and commissioning of XLPE armoured copper cable for fire devices (MCP) of size 2×1.5 sqmm with PVC conduit pipe.Make:- RR Cables/ Plaza/Havells.

The contractor /Agency will submit a " System in working condition" certificate from local fire authority after completion of work at their own cost.