Haryana Urban Development Authority Tender

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

Supply Erection of PVC insulated and sheathed underground cable, loose in existing pipe or trenches 1100 volts core having solid aluminium conductor wires confirming to IS: 694 including making necessary connection complete in all respect up to entire satisfaction of the Engineer-in-charge. 120 sqmm X 3 ½ core cable (Armoured)

Supply, Erection and Transportation upto site including all taxes as per latest Govt. Instruction amended time again of Prestressed cement concrete pole as per IS: 1678/1960. 9 Mtr. Long 105mm x 115mm at top and 105mm x 315m at bottom with working load of 200 kg. Buried 1.80 m in ground or as per UHBVNL specification complete in all respect up to the entire satisfaction of Engineer-in-Charge.

Supply, Erection and Transportation upto site including all taxes as per latest Govt. Instruction amended time again of Prestressed cement concrete pole as per IS: 1678/1960. 11 Mtr. Long 140mm x 200mm at top and 140mm x 400mm at bottom with working load of 400 kg. Buried 2.20 m in ground or as per UHBVNL specification complete in all respect up to the entire satisfaction of Engineer-in-Charge.

S/E of 300 Sqmm single core unarmored power cable with aluminum conductor 650/1100 V confirming to ISS 1554 (Part-1) of 1988 IS 7098/Part-1/1988 with latest amendments upto respect upto the entire satisfaction of Engineer-in-charge. Make(Plaza/Havells/ICL/KEI/UNIVERSAL/ CIRTINA/Panasonic Anchor)

Supply and erection of 11 KV Lightening Arrestor (conforming to ISS:3070/1985) with latest amendments complete in respect and erection of the same upto the entire satisfaction of the Engineer-in-charge.

Supply and Fabrication of M.S. Flat size 50 x 6 mm as per relevant IS specification along with painting and priming coat up to the entire satisfaction of Engineer-in-Charge.

S/E of 11 KV G.I. Pins (long) for H.T. line (Conforming to ISS 2486 (Part-I and II) with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-Charge.

S/E of 11 KV Pin Insulator Brown Glazed with creepage distance with 230mm Jaya Shree Make (Conforming to ISS 73/1971) with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-Charge.

Shifting of LT PCC Pole 9 Mtr. Long including dismantlement of ACSR Conductor GI wire and all accessories installed on the same location erection of the same suitable location complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

S/E of M.S. Stay set complete with elbow and Nuts complete in all respect made out of M.S. Rod 18mm dia and 1.8mtr. long to with stand 1000 Kg load under tension and upper and theaded upto 0.25 Mtr. Length and elbow made out of 16mm dia M.S. round shall be welded firmly on M.S. Angle of size 50 x 50 x 6mm of 180mm and (conforming o ISS 226, ISS 1732/1971) with latest amendments three of and hexagonal Nuts conforming to ISS 136/1971 with latest amendments on pole complete in all respect upto the entire satisfaction of Engineer-In-Charge. S/E of stay set 2 No. for 11 Mtr. Long PCC pole alongwith GSS wire and Disc insulator complete.

S/E of L.T. Shackle Insulator of size 90 x 75mm (conforming to ISS:1445/1977) with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-charge.

S/E of M.S. D-Strap type –I made out of M.S. Flat 40 x 6mm and suitable for L.T. insulator 90 x 75mm with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-Charge excluding cost of nuts an bolts .

Dismantlement of 200 KVA pole mounting substation without poles. The dismantlement of substation complete with following accessories:- 1. R.D. Fuse Unit 2. Transformers Plateform 3. Thimbles for HT/LT connections to the transformers and earthing of various metallic parts with appropriate size of aluminium thimbles shall be cramped. 4. Place of T/F on Plateform.

Supply and erection of G.O. Switches with 9 Nos. Post Insulators of Jay Shree Make Conforming to ISS:1818/1972 and ISS:2544/1963 with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-Charge.

S/E of M.S. Stay set complete with elbow and Nuts complete in all respect made out of M.S. Rod 18mm dia and 1.8mtr. long to with stand 1000 Kg load under tension and upper and theaded upto 0.25 Mtr. Length and elbow made out of 16mm dia M.S. round shall be welded firmly on M.S. Angle of size 50 x 50 x 6mm of 180mm and (conforming o ISS 226, ISS 1732/1971) with latest amendments three of and hexagonal Nuts conforming to ISS 136/1971 with latest amendments on pole complete in all respect upto the entire satisfaction of Engineer-In-Charge. S/E of stay set 1 No. for 11 Mtr. Long PCC pole (excluding cost of clamp and Nut and Bolts) alongwith GSS wire and Disc insulator complete.

Supply and Fabrication of M.S. Channel size 100x50x6mm M.S. Channel size 75x40x6mm as per relevant IS specification, painting and priming coat upto the entire satisfaction of Engineer-in-Charge.

Supply and Fabrication of M.S. Angle Iron size 50x50x6mm as per relevant IS specification alongwith painting, priming coat upto the entire satisfaction of Engineer-in-Charge.

S/E of ACSR Conductor Of size 30 mm2 (PVC Insulated) (confirming to IS 398 (PART-II) 1976/1996, IS 4826-1976, IS:1521-1972 and IS:1778-1980 with latest amendments as per UHBVN Specifications including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of the engineer –in - charge

S/E of ACSR Conductor Of size 30 mm2 (confirming to IS 398 (PART-II) 1976/1996, IS 4826-1976, IS:1521-1972 and IS:1778-1980 with latest amendments as per UHBVN Specifications including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of the engineer –in - charge. ACSR Conductor 30 Sqmm

S/E of ACSR Conductor Of size 50 mm2 (confirming to IS 398 (PART-II) 1976/1996, IS 4826-1976, IS:1521-1972 and IS:1778-1980 with latest amendments as per UHBVN Specifications including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of the engineer –in - charge. ACSR Conductor 50 Sqmm

Supply and Erection of fuse unit L.T. side of 100/200 KVA Transformer complete with wooden board cleats, aluminium strips M.S. clamp and M.S. Nuts and Bolts Including all petty material required up to the entire satisfaction of Engineer-In-Charge

Supply Erection of PVC insulated and sheathed underground cable, loose in existing pipe or trenches 1100 volts core having solid aluminium conductor wires confirming to IS: 694 including making necessary connection complete in all respect up to entire satisfaction of the Engineer-in-charge. 25 sqmm. 4 core cable (Armoured.) Make:-Havell’s/Polycab/Grandlay

Dismantlement of 9 Mtr. long PCC/Rail 4-Pole 1.5 Mtr. below ground level for HT Lines as per enclosed drawing. The dismantlement of 4-Pole structure or sectionalizing structure with 4 Nos. stay sets include the fixing of following item 1. Pin Insulator with Pins 3 Nos. 2. M.S. Angle Iron 50x50x6mm, 1.2 Mtr. long with suitable holes as per requirement and as per site conditions. 1 Nos. 3. Half clamp (suitable size and shape) with 2 Nos. holes fitted at pole 1275mm below top (Its fabrication from M.S. Flat and providing of holes). 2 Nos. 4. Nuts and Bolts (suitable size) as per requirement for above items. 5. Disc. Insulator with fittings. 6 Nos. 6. M.S. Channel 75x50x50x6mm 2.0 Mtr. long providing of holes as per requirement and site conditions. 7. M.S. Rod 2400mm x 16mm dia with threading bending as per drawing enclosed. 4 Nos. 8. RCC Anchor Plate 450x450x75mm as per drawing enclosed. 4 Nos. 9. GSS Wire 7/8 SWG 35-40 Kg. or as per site conditions. 10. M.S. Turn Buckle. 4 Nos. 11. M.S. Clamp 50x6mm with nuts and bolts of required size (as per weight) and its fabrication from M.S. flat with suitable holes as per site conditions. 4 Nos. 12. M.S. Angle Iron 50x50x6mm, 450mm long for Anchor Plate and providing of holes as per drawing. 4 Nos. Including removal of all dismantled material from site in lieu of rebate of the same.

Installation charges for 200 KVA Capacity Transformer