Government Of Haryana Tender

Providing & Marking center line / side line 2.5 mm thick (minimum) with hot applied thermo-plastic road marking paint 10 cms wide/15 cm wide complete in all respect such as furnishing all labour, material, tolls equipment including all incidental costs necessary for carrying out in work at site confirming to the technical specification as clause no. 803 of MORT&H specification for road and bridge work. (5th revision) of 2013/latest edition. Each container of the thermoplastic material shall have the name trademark or other means of identification of manufactureer, batch number, date of manufacture color maximum application temperature and maximum heating temperature. The thermoplastic paint material shall be of Asian Paint-Apromark/Berger-Sigmarc/Prismo. The glass beads shall be of Potters/Sovitec/Fleolite. The thermoplastic material shall be sampled and tested in accordance with appropriateASTM/BS method, The contractor shall furnish to the Engineer-in-Charge a copy of certified test report from manufacturer of the thermoplastic material meet all requirement of the specification. The reflectorizing glass beads shall meet the requirement of clause 803.4.2 and test methods mentioned in clause 803.4.2 shall be meticulously followed. The minimum thickness specified is exclusive o surface of glass beads the method of thickness measurement shall be in accordance with appendix B and C of BS:3262 (part-3) Note:- Before start of work the contractor shall give brand batch no., manufacruing date of teh material to be used and get approved the same from Engineer-in-charge before use.