Chaudhary Devi Lal University Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 3,44,130Document Cost
₹ 15,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_HRY_199716_1Bid Award Id
ViewTender No
EE 2/2Tender Authority
Chaudhary Devi Lal University ViewPurchaser Address
-Website
http://https://haryana.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
HSR 4.40) Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion). 4.40.2) Along the external wall below concrete or masonry apron using chemical emulsion @ 4.32 litres per linear metre including drilling and plugging holes etc 4.40.2.1) With Chlorpyriphos/ Lindane E.C. metre 20% with 1 % concentration.
206.7
-
-
4.40.3) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 4.40.3.1) With Chlorpyriphos/Lindane E.C. 20% with 1 % concentration.
602.01
-
-
4.40.4) Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1 :2 (1 cement : 2 coarse sand) to the full depth of the hole. 4.40.4.1) With Chlorpyriphos/Lindane E.C. 20% metre with 1 % concentration.
356.72
-
-
4.40.1) Treatment at points of contact of wood work by metre chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. 4.40.5.1) With Chlorpyriphos/Lindane E.C. 20% metre with 1 % concentration.
154.75
-
-
HSR 5.7) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 5.7.4) In Cement mortar
23.85
-
-
HSR 5.26) Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.
20.68
-
-
HSR 5.27) Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge
20.68
-
-
HSR 5.29) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: 5.29.1) Of area 3 sq. metres and below
28
-
-
5.29.2) Of area beyond 3 sq. metres
41
-
-
HSR 5.43) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 5.43.1) For thickness of tiles 1O mm to 25 mm
1059.94
-
-
HSR-21 5.45) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (NOTE:- wall tiles alongwith plaster to be dismantal).
482.32
-
-
HSR 6.1) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6.1.6) 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size)
11.55
-
-
HSR 6.15.1) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 cum graded stone aggregate 20 mm nominal size).
5.18
-
-
HSR 6.16) Reinforced cement concrete work in beams, suspended floors, cum roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size).
15.82
-
-
HSR 6.21) Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1 ½ coarse sand(zone-111) : 3 graded stone aggregate 20mm nominal size).
6.48
-
-
HSR 6.14) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level. 6.14.2) 1 :2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size)
1.66
-
-
HSR 6.30) Centering and shuttering including strutting, propping etc. and removal of form for: 6.30.1) Foundations, footings, bases of columns, etc. for mass concrete.
37.8
-
-
6.30.3) Suspended floors, roofs, landings, balconies.
103.5
-
-
6.30.4) Shelves (Cast in situ).
9.18
-
-
6.30.6) Columns, Pillars, Piers, Abutments, Posts and Struts.
12.96
-
-
6.30.13) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.
86.4
-
-
6.30.16.1) Edges of slabs and breaks in floors and walls Under 20 cm wide.
72
-
-
HSR-21 6.33) Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6.33.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
2118.49
-
-
HSR 7.21.2) Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in:
33.13
-
-
HSR 7.22.2) Brick work with common burnt clay non-modular bricks of class Designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :
19.78
-
-
HSR 8.5) Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
145.98
-
-
HSR 8.26) Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.26.2 Granite of any colour and shade 8.26.2.1 Area of slab upto 0.50 sqm
6.53
-
-
8.26.2.2) Area of slab over 0.50 sqm
11.48
-
-
HSR 8.28) Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
25
-
-
HSR 9.52) Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class Kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): 9.52.1 Flat Surfaces
150.79
-
-
HSR 9.53) Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling.
37.7
-
-
HSR 10.1) Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8: 16 and 100 mm sand or stone filling.
455.53
-
-
HSR 10.4) Providing and laying of screed of 50 mm thick cement concrete 1 :8:16 to be laid below the topping.
95.94
-
-
HSR 10.37.1) Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) : 10.37.1 25 mm thick
95.94
-
-
HSR 10.38) Providing and fixing of Kota stone slabs 20 mm thick in risers of steps,skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
7.38
-
-
HSR 10.50) Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 10.50.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
369.44
-
-
HSR 10.51) Providing and fixing granite stone in all shades 15mm to 18 mm thick in sqm skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc.
19.6
-
-
HSR 10.63) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 10.63.2 Size of Tile 600 x 600 mm.
68.42
-
-
HSR 10.67) Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 10.67.2 Size of Tile 600 x 600 mm.
440.75
-
-
10.67.3) Size of Tile 800 x 800 mm.
17.22
-
-
10.67.4) Size of Tile 1000 x 1000 mm.
24.35
-
-
HSR10.70) Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 10.70.2 Size of Tile 600 x 600 mm.
509.17
-
-
10.70.3) Size of Tile 800 x 800 mm.
360.82
-
-
10.70.4) Size of Tile 1000 x 1000 mm.
214.34
-
-
HSR10.71) Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive(water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) 10.71.3 Size of Tile 800 x 800 mm.
189.99
-
-
10.71.4) Size of Tile 1000 x 1000 mm.
343.6
-
-
HSR 10.72) Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.
1084.33
-
-
HSR 10.108) Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement: 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of Engineer-in-Charge.
247.13
-
-
HSR 10.109) Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1 :4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
145.41
-
-
HSR 11.5.4) 12 mm cement plaster of mix 1:6.
174.31
-
-
HSR 11.6.2) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6.
93.17
-
-
HSR 11.4.2) 10mm thick cement plaster of mix 1:3.
94.75
-
-
HSR 11.78) Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
57.6
-
-
HSR 11.68.3) Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
57.6
-
-
HSR 11.67.1) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: 11.67.1:- Water thinnable cement primer
8802.24
-
-
HSR 11.71) Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 11.71.1 Two or more coats on new work
8319.82
-
-
HSR11.60) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1628.23
-
-
HSR 11.76) Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.
58.03
-
-
HSR 11.91) Melamine polishing on wood work (one or more coat).
58.03
-
-
HSR 12.1) Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately). 12.1.1 Second Class Teak Wood
1.74
-
-
HSR12.6) Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
180
-
-
HSR12.12) Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 12.12.2 ) 1.0 mm thick
120.75
-
-
HSR 12.18) Deduct for not providing hinges in doors, windows or clerestory window shutters with : 12.18.1 Stainless steel butt hinges with stainless steel screws : 12.18.1.1 For 2nd class teak wood and other class of wood shutters.
60.38
-
-
HSR 12.33) Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 12.33.2 With 12 mm mild steel U beading
78
-
-
HSR 12.37) Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 12.37.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
42.42
-
-
12.37.2) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
17.96
-
-
HSR 12.76) Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 12.76.1 125x85x5.5 mm (heavy type)
120
-
-
HSR 12.78) Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 12.78.1) 200x10 mm
30
-
-
12.78.2) 150x10 mm
32
-
-
HSR 12.80) Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
28
-
-
HSR12.85.1) Providing and fixing bright finished brass handles with screws etc. complete.
60
-
-
HSR 12.86) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
30
-
-
HSR12.88) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 356 4, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete.
9
-
-
HSR 12.89) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
19
-
-
HSR 12.131) Providing and fixing factory made UPVC white colour casement / casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 12.131.2) Casement window double panels with S.S. friction hinges (300 x19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0. 75 sqm up to 1.50 sqm).
10.4
-
-
HSR 12.136) Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded lnline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) crescent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all comers, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 12.136.4) Three track three panels sliding door with fly proof S.S wire mesh (Two Nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm up to 5.00 sqm).
45.5
-
-
HSR 12.171) Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
6.3
-
-
HSR 12.172) Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600. 12.172.2) Up to 10 mm depth and 10 mm width
216.9
-
-
HSR 12.177) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 12.177.1) With float glass panes of 6 mm thickness (weight not less than 15 kg/sqm)
87.16
-
-
HSR13.27) Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1851.42
-
-
HSR 13.30) Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 13.30.2) Hot finished seamless type tubes.
3544.64
-
-
HSR13.41) Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
155.33
-
-
HSR 29.7) Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-Ill). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
40.76
-
-
HSR 30.16) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in charge. 30.16.1) With cement mortar 1 :4 ( 1 cement : 4 fine sand)
454.55
-
-
HSR 30.20) Flush pointing with cement mortar 1 :3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for prefixed flat tile bricks on top of mud phaska: 30.20.1) With F.P.S. brick tiles
1485.62
-
-
HSR 30.21) Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
92.06
-
-
HSR 30.22) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
8347.95
-
-
30.28) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 30.28.1) One or more coats on old work
3083.43
-
-
HSR 30.37) Finishing walls with Acrylic Smooth exterior paint of required shade: 30.37.1 Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface
2870.11
-
-
HSR 31.14) Rebarring work with 10ml inject able mortar epoxy adhesive (Hybrid Urethane Methacrylate adhesive) or chemical compound of make as approved by Engineer- in-Charge complete in all respect including drilling and cost of all materials. 31.14.1) 8 mm dia (hole size 12 mm.& hole depth up to 80 mm)
64
-
-
31.14.2) 10 mm dia (hole size 14 mm.& hole depth up to 100 mm)
476
-
-
NON-SCHEDULE ITEMS (CIVIL WORKS) NS C-1) Providing and fixing of stainless steel handles 450 mm long 2 pair for toughened glass with screws etc. complete in all respects to the entire satisfaction of Engineer-in-charge.
4
-
-
NS C-2) Providing and fixing stainless steel ( corner patch lock) door latch with SS strike plate and necessary screws etc. complete in all respects to the entire satisfaction of Engineer-in-charge.
2
-
-
NS C-3) Wall painting with Asian ROYAL/berger silky paint of approved brand and manufacture to give an even shade (two or more coats).
996
-
-
NS C-4) Providing and laying of 25 mm thick Washed Pea gravel ( Jeera Bajri) flooring comprising ( 1 Part Cement: 2 Part Coarse sand : 3 Parts Jeera Bajri ) by volume, Jeera bajri layer is to be laid over under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) as per approved pattern and levelled firstly with wooden trowel and then stamping with steel trowel and allow it to set for 6 hours. After that scrubbing and washing the top layer with brushes and water to expose the Pea gravels (Jeera bajri)
34.11
-
-
VENEER CEILING: NS C-5) Providing and fixing 4mm thick (5 ply) decorative veneer Ceiling (confirming to IS : 1328) as per sample approved by Architect / Engineer-in-charge over 12mm thick commercial ply (confirming to IS 303) over GI craddling work to the grid comprising of cold rolled galvanized metal section to the required line and level. The grid consists of a perimeter channel (MF6a of dimensions 20 mm X 27 mm X 37 mm X 3.5 M) fixed round the perimeter to receive and of the ceiling section (MF5). The intermediate channel (MF7 of dimensions 15 mm X 45 mm X 0.9 mm X 3.6 M) at 1200 mm c/c in the one direction and the ceiling section (MF5 of dimensions 80 mm X 26 mm X 0.5 mm X 3.6 M) at 450 mm c/c in the other direction are connected by a connecting clip (MF9). The grid is suspended with an adjustable strap hanger (MF8) of dimensions 25 mm X 0.5 mm at 1200 mm c/c on both ways from the structural soffit using a soffit cleat and expandable bolts / fasteners Nut and bolts are used to connect strap hangers to soffit cleats and for joining ends of channel sections together. 12mm thick commercial ply shall be screwed to the M/F ceiling sections drywall screws.Perimeter Channels (MF7) to be used around the cut outs for light fittings. A/C ducting etc. The work should be complete as per instructions of Architect or Engineer in charge. Decorative veneer is finished with PU polish after proper surface preprartion as per manufacturer's specifications and to the entire satisfaction of Architect / Engineer-in-charge. Decorative veneered ceiling shall be paid on per Sqm basis - flat area of the ceiling without the surface area of beams.
66.93
-
-
WOODEN PANELLING NS C-6) Providing and fixing wooden panelling comprising of 4mm thick decorative veneer (Greenply/Sonear/Century) over 12mm thick commercial ply (Greenply/Sonear/Century) fixed with screws over 50mm x 25mm (16guage) Raw Aluminium frame @ 600mm c/c vertically and horizontally fixed on walls with rawl plugs. Veneer is finished with decorative mouldings as per pattern given in the drawing and finished with PU polish after proper surface preprartion as per manufacturer's specifications and to the entire satisfaction of Architect / Engineer-in-charge.
228.96
-
-
GRC JALLI: NS C-7) Providing and fixing GRC jalli fixed to M.S tubular frame for claddling work as per design and drawing approved by Engineer-in-Charge to be fixed on/between RCC/Block work Column or Structural Steel work with ‘Dry fixing’ method with all appropriate steel or Metal frame work, Stainless Steel (SS – 304) ‘L’ shaped Clamps, dash fasteners and pins including anchoring, lifting, scaffolding etc. complete as per architectural drawing and manufacture specification The Screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’, ‘Birla white’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘Saint Gobain’, ‘OC’, NEG or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Mould manufactured by ‘Reckli’ or equivalent. complete in all respects. (Fabrication of MS Steel frame will be paid separately as Scheduled Item.) Make:- UNISTONE/Dalal Tiles/NTC/Unicrete.
121.5
-
-
NS C-8) Rubbing and Polishing of existing Kotah stone laid in flooring and skirting/dado whereever required complete in all respects.
470.99
-
-
NS C-9) Recovery of Old Dismantled material. (a) MS door / Window chokhat and MS grill.
4305.89
-
-
PUBLIC HEALTH WORKS - AS PER HSR 2021 HSR 5.54) Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: 5.54.1 ) 75 to 80 mm dia pipe
158.1
-
-
5.54.2) 100 mm dia pipe
318.64
-
-
HSR 5.55) Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as oer direction of Engineer-in-Charge: 5.55.1) 15 mm to 40 mm nominal bore
187
-
-
5.55.2) Above 40 mm nominal bore
216.15
-
-
HSR 6.1) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6.1.2 ) 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)
14.16
-
-
HSR 9.57) Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 9.57.2) 110mm diameter
209
-
-
HSR 9.58) Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 9.58.5) Bend 87.5° 9.58.5.2) 110 mm bend
44
-
-
HSR 9.59) Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1 :4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 9.59.2) 110 mm
88
-
-
HSR 10.1) Cement Concrete 1 :8:16 Flooring 10.100.2) Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth.
6.16
-
-
HSR 20.26) Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, re-plastering and finishing according to existing finish where required. 20.26.1 11.43 cm thickness of walls
45
-
-
20.26.2) 22.86 cm thickness of walls
45
-
-
HSR 20.36 ) Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site.
1
-
-
HSR 20.49) Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. 20.49.1) Up to 200 mm internal diametre
1
-
-
HSR 22.14) Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 21.14.2 Flexible pipe 22.14.2.1) 32mm dia
22
-
-
HSR 22.15) Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
22
-
-
HSR 22.20) Providing and fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass hinged grating with frame complete. 22.20.2) With 75 mm internal diameter outlet
31
-
-
HSR 22.12.1) Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 22.12.1 - 15 mm nominal dia.
11
-
-
HSR 22.33) Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
15
-
-
HSR 22.38) Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
15
-
-
HSR 22.42.1Providing and fixing toilet paper holder: 22.42.1 C.P. brass
15
-
-
HSR 22.46) Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
2
-
-
HSR 22.50.1.2) Providing and fixing partitions for different type of urinals. 22.50.1) Vitreous Chinaware Partition plate. 22.50.1.2) Large size 835mm x 355 mm. 22.50.1.2.1) White
2
-
-
HSR 22.85) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 22.85.4) 32 mm nominal outer dia Pipes
391
-
-
HSR 22.86) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 22.86.2) 20 mm nominal outer dia pipes.
216.15
-
-
HSR 22.87) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 22.87.7) 62.50 mm nominal outer dia Pipes 22.101.2) 45 cm length
181
-
-
HSR 22.101) Providing and fixing Unplasticised PVC connection pipe with brass unions: 22.101.2) 45 cm length 22.101.2.1) 15 mm nominal bore
71
-
-
HSR 22.102.2) Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 22.102.2 - 150 mm diameter 22.107) Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
11
-
-
HSR 22.107) Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 22.107.1) 15 mm nominal bore
45
-
-
22.108) Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 22.108.1) 15mm nominal bore
71
-
-
HSR 22.109) Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
165
-
-
HSR 22.166) Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 22.166.1) 100x100 mm size P type 22.166.1.1) With common burnt clay non-modular bricks of class designation 7 .5
24
-
-
22.214) Providing and fixing in position best Indian make C.P. brass Tumbler cum Tooth Brash holder fixed in with rawl plugs with C.P. brass screws and complete including cutting and making good the walls etc.
11
-
-
HSR 22.216) Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/ non- pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-incharge. 22.216.3) 35 Litres capacity
13
-
-
22.221) Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. 22.221.11) Table Top (size 49 x 40 x 15 cm)
17
-
-
HSR 22.222.2) Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type-B 110mm old SWR UPVC pipe lines laid complete
109.64
-
-
22.222.2.3) 90mm old SWR UPVC pipe lines laid complete
158.1
-
-
HSR 30.88) Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1 :3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 30.88.1) For pipes 100 to 250 mm diameter
1
-
-
NON-SCHEDULE ITEMS (PUBLIC HEALTH WORKS) NS PH -1 Providing & fixing in position 6mm thick Looking Mirror( Make Saint Gobain/Modi-Guard/Asahi) 600mm high including 6mm thick commercial ply on back side and teak wood moulding (50 x 20 mm) on all sides as per approved design/drawing fixed in position by means of 4 Nos. S.S Studs with S.S screws (as required by the engineer-in-charge) including cutting and making good the walls etc. complete in all respects to the entire satisfaction of Engineer-in-Charge.
20.16
-
-
NS PH-2) Providing and fixing in position Health Faucet (ABS Body) with 8mm Dia, 1.2 Meter Long Spirochrome flex tube & Wall Hook (ALD 587) including all fixtures, complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
15
-
-
NS PH-3) Providing & fixing Pressmatic Type Pillar Cock Auto Closing System with 65 mm extension body (PRS-031L65) including all fixing accessories complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
2
-
-
NS PH--4) Providing and fixing in position Single Lever Mini Basin Mixer Without Popup Waste System With 450mm Long Braided Hoses (FLR-5025B) including all fixtures complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
15
-
-
NS PH-5) Providing & fixing Soap Dispenser with Glass Bottle (ACN-1135N) including all fixing accessories complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
17
-
-
NS PH-6) Providing & fixing Hand Dryer satin finish (HDR-SAP-M99ACS) AISI 304 Stainless Steel including all fixing accessories complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
4
-
-
NS PH-7) Providing and fixing in position Soap Dish Holder (ACN-1131N) complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
11
-
-
NS PH-8) Providing & fixing Single Towel Rail 600mm Long, Stainless Steel (ACN- 1111SM) including all fixing accessories complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
11
-
-
NS PH-9) Providing & fixing CP Shower 20mm square type, Stainless Steel including all fixing accessories complete in all respects of (JAQUAR or Equivalent make.)
11
-
-
NS PH-10 ) Providing & fixing Towel Ring Round with Round Flange (ACN-1121BN) including all fixing accessories complete in all respects of (JAQUAR or similar model of Equivalent make such as Hindware/Kohler/Grohe etc.)
17
-
-
ELECTRICAL WORKS - AS PER HSR 2021 HSR 20.71) Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 48" (1200mm)
29
-
-
HSR 20.72) Supplying, errection, testing of Exhaust fan (as per IS code 374) having a each capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. DG SET
20
-
-
HSR 20.89) Designing, Supply & erection of DG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 +(-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM. a) Diesel Engine, b) Alternator, c) Battery 24 v., d) Base Plate., e) suitable sq mm suitable core copper cable upto 40 metres., f) Tools, standard panel, g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT's), h) Metering set 60/5A/11 OV (Amp. Meter, Volt Meter), i) Overload protection for DC-1 No., j) Battery Charger 24V DC, k)Copper bus bar of suitable size, I) KWH meter 96 sqmm size, m) Starting fuse button and key switch9on/off), n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, De control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge. 20.89.7)125 KVA
1
-
-
HSR 22.86) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.( for drain pipe of AC) 22.86.3) 25 mm nominal outer dia Pipes
240
-
-
HSR 23.4) COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT 23.4.1) Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe.(Tube Light 32+ Down Lighter 10+Wall Light 88+Mirror Light 17+ Fan 29+ Ex Fan 18+ Call Bell 1=195 23.4.1.3) Group C
30
-
-
23.4.2) Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. 23.4.2.32) Group C
2
-
-
23.4.3) Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control 23.4.3.3) Group C
12
-
-
23.4.4) Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required 23.4.4.3) Group C
36
-
-
23.4.5) Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required 23.4.5.3) Group C
36
-
-
HSR 23.5.6) Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 23.5.6.1) 1 run of Size 1.50 Sqmm(1/1.40mm) ( For LCD/COMP Points 14x15=210
1300
-
-
23.5.6.2) 1 run of Size 2.50 Sqmm(1.1.80mm)( For Sub mains to SB,s 15x85=1275
1275
-
-
23.5.6.3) 1 run of Size 4 Sqmm(1/2.24mm) ( Misc Jobs)
490
-
-
23.5.6.4) 1 run of Size 6 Sqmm(1/2.80mm) ( Misc Jobs)
740
-
-
23.5.6.5) 1 run of Size 10 Sqmm(1/3.50 mm)( For Misc Jobs)
100
-
-
HSR 23.7.6) Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. 23.7.6.2) PVC pipe of 25 mm dia
2000
-
-
23.7.6.3) PVC pipe of 32 mm dia
200
-
-
23.7.6.4) PVC pipe of 40 mm dia.
100
-
-
HSR 23.8.1) Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. 23.8.1.6) Call bell 220/230 volts musical type/ding dong
12
-
-
23.8.1.7) Electric buzzer 220/230 volts A.C. Bakelite with double coil
12
-
-
23.8.10) Providing & fixing G.I. concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. 23.8.10.1) 1 & 2 Modules
32
-
-
23.8.10.2) 3 modules
66
-
-
23.8.10.3) 4 Modules
5
-
-
23.8.10.4) 6 Modules
51
-
-
23.8.10.5) 8 Modules
18
-
-
23.8.10.6) 12 Modules
20
-
-
23.8.11) Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 23.8.11.1) 5 amp. 1 way switch( For socket on SB 85 )
198
-
-
23.8.11.3) 15 amp. 1 way switch ( For Misc Jobs)
37
-
-
23.8.11.4) 5 amp. Socket ( For Socket on SB 85)
85
-
-
23.8.11.5) 15 amp. 6 pin Socket ( For Misc Jobs)
37
-
-
23.8.11.6) Bell Push
32
-
-
23.8.11.7) step type Fan Regulator 2 modules 300 wat
29
-
-
23.8.11.8) Telephone Socket outlet modular type
12
-
-
23.8.11.9) TV Socket outlet modular type
14
-
-
23.8.11.10) Blinking plate
60
-
-
23.8.11.11) RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type
31
-
-
23.8.11.12) USB Charger, 1000mA, 5V, 1 Module ( For Non residential use only)
12
-
-
23.8.11.13) 32A D.P. Main Switch With Key Ring Tag 2 Module ( For Guest room or similar use only )
12
-
-
23.8.13) Supplying,installation,testing and commissioning of Passive lnfrared(PIR) based occupancy sensor , non regulating programmable type, suitable for connected load up to 1 OAmp , for mounting height up to 2.8 metre and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.( only for bath room)
14
-
-
23.12) Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required
20
-
-
23.2) Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false each 75 ceiling including making connections etc as required
20
-
-
23.21) Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling including each 54 cutting/making hole in ceiling including making connections etc as required
62
-
-
HSR 23.22.1) Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 23.22.1.11) 4 pole MCCB 125 amp to 160 amp , 25 KA
8
-
-
23.22.1.11) 4 pole MCCB 200 to 250 amp, 25 KA
2
-
-
23.22.5) Supply and erection of miniature circuit breaker/isolator 240/415V in the existing distribution board including making necessary connections:- 23.22.5.1) 6 amp. to 32 amp Single Pole( For HDB,s 8x24=192)
192
-
-
23.22.5.3) 6 amp. to 32 amp double Pole( For Misc Jobs)
2
-
-
23.22.5.7) 6 amp. to 32 amp MCB's FOUR POLE( For Misc Jobs)
2
-
-
23.22.5.8) 40 amp to 63 amp. MCB's FOUR POLE( For HDB Incomings 8No)
40
-
-
23.22.6) Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. 23.22.6.6) FP RCCB 30ma sensitivity, 63 A (For HDB Incomings =8)
16
-
-
23.22.8) SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 23.22.8.4) 300 amp 415 volts
1
-
-
23.23) MISCELLANEOUS 23.23.1) Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- 23.23.1.3) Size 25 mm dia
20
-
-
23.23.2) Supply of GI pipe (B-Class) for suspension rod of ceiling fan including threading if required. 23.23.2.2) 20 mm dia
5
-
-
23.23.6) Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. 23.23.6.1) MS perforated cable tray painted with powder coating 100 X 50 X2mm
50
-
-
23.23.7.1) Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. 23.23.7.1) GI cable tray Cover, suitable for cable tray of 100 X 50 X 2 mm
50
-
-
23.23.9) Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVc conduit as required
1230
-
-
23.24) MS STAND, BUS BAR CHAMBER AND PANELS 23.24.1) Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide.
20
-
-
23.24.2) Erection of Cubical type Electrical Panels/ Feeder Pillars including necessary mounting Frame made of suitable size I section of required size on existing foundation/platform etc as required 23.24.2.1) Panels/Feeder Pillars having incomers up to Four pole 200 A , Base Mounting frame made of ISMC 100*50*5 mm
8
-
-
23.25) DISMANTLING 23.25.2) Dismantling old wiring points ( Recess wiring or partly recess partly surface system , recess Conduit and box not to be dismanUed ) including necessary repairs to wall etc. 23.25.2.1) Light, fan or call bell Point including circuit/sub main wiring
50
-
-
23.25.2.2) Wall socket point including circuit/submain wiring
50
-
-
24.1.) Earthing 24.1.3) Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.( 8No for ducts & 2No for DG and LT Panel Earthing)
10
-
-
24.1.4) Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.
2
-
-
24.1.5) Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode.
12
-
-
24.1.6) Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required
50
-
-
24.1.7) Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
100
-
-
24.1.8) Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for metre 108 connections etc. as required with all labour and material.
100
-
-
24.1.9) Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required
20
-
-
24.1.13) Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.
20
-
-
24.2) LT CABLE 24.2.4) Laying of underground cable in pipe /existing open/closed trench/cable tray etc as 24.2.4.2) 16 Sq mm to 35 sqmm 2 to 4 Core
755
-
-
24.2.4.3) 50 Sq mm to 150 sqmm 2 to 4 Core
1000
-
-
24.2.7) Supply and erection of suitable compression type brass cable glands for underground Cable : 24.2.7.2) 10 sqmm to 16s qmm Cable 2 to 4 Core
5
-
-
24.2.7.3) 25 sqmm to 50 sqmm Cable 2 to 4 Core
10
-
-
24.2.7.5) 120 sqmm to 185 sqmm Cable 3 to 32 Core
10
-
-
24.2.8) Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work 24.2.8.4) 16 Sq mm
5
-
-
24.2.8.5) 25 Sq mm
10
-
-
24.2.8.6) 35 Sq mm
30
-
-
24.2.8.7) 50sqmm
30
-
-
24.2.8.10 ) 120 sqmm
10
-
-
24.2.8.11) 150 Sq mm
10
-
-
24.2.10) Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/riveted at the top with 10 cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level
8
-
-
24.5.2) S/E mark double walled corrugated (DWC) HOPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work 24.5.2.3) HDPE pipe 63/50 mm outer dia/ inner dia
1575
-
-
24.7) RCC FOUNDATIONS FOR DG SET Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1 .Bx1 .Om) Unit: per cum per cum 8637 Note: As size and dynamic load of DG sets vary from manufacturer to manufacturer, item of DG set foundation have been included on the basis of cubic contents of RCC. 24.7.4) 125 KVA OG Set
1
-
-
31.16.) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per instructions 31.16.1) With cement mortar 1 :4 ( 1 cement : 4 fine sand)
200
-
-
NON SCHEDULE ITEMS NS 1) Supply installation ,tesing and commissioning of Wall mounted split air conditioner with inverter technology (variable speed ) 5 star rating having capacity 1.5 or 1.6 TR with copper condenser, R32 refrigerant , having AC stand & remote control , EER rating 4.99 or above with 1 year warrenty on machine, PCB warrenty 5 year and 10 year on compressor including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge make -O-general, Mitshubishi, Daiken
12
-
-
NS -2) Supply installation ,tesing and comissioning of automatic voltage corrector or step type auto transformer having capacity 4KVA with 60 up/down in aluminium winding with digital voltmerter and selector switch, wall mounting with 2 year warrenty including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge . Make :- Micotek, Powerguard, V-guard
12
-
-
NS-3) Supply of extra refrigerant pipe for air conditioner suitable for 5/8 & 1/4 size 1.5 TR/4500 Kcal/hr including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge Make :- Panasonic , Duo, totalline
120
-
-
NS-4) Dismentaling ,re-installation ,tesing and commissioning of Old Wall mounted split air conditioner including loading , unloading charges cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge
11
-
-
NS-5) Supply of underground aluminium conductor PVC insulated, Armoured, 3.5 core x 50 sq. mm Lt cable complete with all labour and material required to complete the work upto the entire satisfaction of Engineer In Charge Make :- Havells/RR kabel/ Ploycab
1170
-
-
NS-6) Supply of underground aluminium conductor PVC insulated, Armoured, 3.5 core x 35 sq. mm Lt cable complete with all labour and material required to complete the work upto the entire satisfaction of Engineer In Charge Make :- Havells/RR kabel/ Ploycab
585
-
-
NS-7) Supply of Surface/ recessed type 18/20 w Full window glarefree opal Diffuser LED Panel of size 295X295mm suitable for Surface with MS Powder coated White Housing. Total system Lumen of 18/20 W LED should be 1150 Lumen or above in Cool day Light(5600K to 6500K), Power factor0.90, CRI (Ra) 80, THD 10%, Led Life 50000hr, LED Lamp Efficacy140 Lm/W. Complete with all accessories as required with connections.Make-Crompton greaves, Havells, Phillips.
20
-
-
NS-8) Supply of Surface/recessed type 36W to 42 watt Full window glarefree opal Diffuser LED Panel of size 600X600mm suitable for Surface with MS Powder coated White Housing. Total system Lumen of 36W LED should be 4100 or above in Cool day Light(5600K to 6500K), Power factor0.90, CRI (Ra) 80, THD 20% LED Lamp. Efficacy140 Lm/W. Complete with all accessories as required with connections Make- Havells, Phillips ,Crompton greaves .
30
-
-
NS-9) Supply of Surface type 4', 1x 20W Smart Brite LED Batten. Total system Lumen of 20W LED should be 3100 or above in Cool day Light(5600K to 6500K), Power factor0.90, CRI (Ra) 80, THD 20% LED Lamp Efficacy140 Lm/W. Complete with all accessories as required with connections.Make- Make- Havells, Phillips ,Crompton greaves .
32
-
-
NS-10) Supply of underground aluminium conductor PVC insulated, Armoured, 3.5 core x 150 sq. mm Lt cable complete with all labour and material required to complete the work upto the entire satisfaction of Engineer In Charge Make :- Havells/RR kabel/ Ploycab
50
-
-
NS-11) Supply ,Erection ,Testing & Commissioning Of AMF Panel for 125KVA DG Set for AUTO starting
1
-
-
NS-12) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required (As per DSR-1.19) (50x12=600) Make - fenolux, polycab / havells
1000
-
-
NS-13) Supply and erection of Main Distribution LT Panel size 1200 mm X 1600X 300 MM for wall/ free standing floor mounting dust and vermin proof compartmentalized cubical panel made out of 1.6mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along with bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of zinc/ Red oxide primer followed by 2 coat of powder coating in gray or required shade after rising. The panel having PU/Neoprene rubber gasket of not less than 3 mm thickness separate detachable gland plate MS base channel hinged door with inter locking agreement for equipment / switch wear.The panel will be complete with wiring (copper) having Copper Bus Bar TPN Copper busbar made from Electrical Grade Copper flats rating 100 AMP lenght sufficient required 300 mm size Duly supported on DMC insulators & covered with heat shrinkable sleeves.complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. ( shifting of Nitches from room balcooni into sub elec. panel)
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements