Western Railway Tender
... More
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is calculated as the average of "total contractual payments" in the previous three financial years. It should be at least 'V/N' or 'V', whichever is less, where V = Advertised value of the tender in crores of Rupees and N = Number of years prescribed for completion of work for which bids have been invited.
Technical Capacity
... View More
The required prior work experience for the bidder is related to work of similar nature, which includes Supply, Installation, Testing, Commissioning of "OFC" and/or "Quad cable"/Telecom cable work, including trenching, laying/blowing, jointing of such cables with SDH network and NMS, Railway Control Communication System, or OEM. The bidder should have completed any kind of work executed in Railway, including AMC given as work contract. The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during the last 07 years: (i) Three similar works each costing not less than the amount equal to 30% of the advertised value of the tender, (ii) Two similar works each costing not less than the amount equal to 40% of the advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of the advertised value of the tender. No specific percentage of similar works completed is mentioned in terms of completion percentage, but the bidder needs to provide information about similar work experience as part of the bidding process. However, the percentages mentioned above (30%, 40%, 60%) are related to the advertised value of the tender.
Costs
EMD
₹ 3,29,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
7-2025R-BHAVNAGAR DIVISION-S AND T/WESTERN RLYTender No
7-2025RTender Authority
Western Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of MS Plate for preparation of J type clamp, 25mm dia MS nut and bolts(02 4 nos.) with water sealed arrangement for fixing prepared J type clamp with ballast retainer wall and hot dip galvanizing of same of same for carrying out of 24 fibers OFC/HDPE/GI Pipe (dia 100 mm) on Minor Bridges. 5
400
947
378832
... More
Supply of 20 pair Cable Termination Box
40
3793
151720
... More
Supply of Maintenance tools kit as per TEC specificationno. GR/OFT-01/03 APR 2005 or latest, one set consistingof following:- 1)Digital multi meter 4 1/2 digits with Liquidcrystal Display 1 No. of Phillips/Motwane Make. 2) Utility Knife-1No. 3)Cable Slitter -1No. 4)Tubing cutter for cable armour -1No. 5) Bare Fiber adaptor -1No. 6) Miller Height precision stripper for fiber buffer -1No. 7)Cleaver Fujkura make or similar-1No. 8)Mechanical splice joint set - (1 setconsisting of 6 Nos). 9) Ceramic Scissor- 1No. 10) FC/PC Adapter with DB loss- 10No. 11)Optical Fiber terminal block V groove-2 No. 12)Earth resistance measuring instrument with all accessories suitable for measuring earth resistance in range of 0.1 Ohms to 10 Ohms. 13)Megger Philips or Motwane: 500 V -1 No. and 100 V -1 No. 14)Loose tube stripper -1 No. 15)Cord stripping pliers -1 No. 16) Supply of Krone tool -1 No. Note: All the tools have to be standard/imported makes, to be approved by Railwaysbefore supply. The above tools shall be supplied in Briefcase Make Safari or Aristocrat with centre lock.
-
-
6
... More
Supply of HQ Control Room Equipment as per RDSO Specification no. RDSO/SPN/TC / 66/2007. 8
1
104585
104585.31
... More
Supply of Test Room Equipment as per RDSO Specification no. RDSO/SPN/TC/ 66/2007
1
104585
104585.31
... More
Supply of Multi Telephone Way station Equipment as per RDSO specification no. RDSO/SPN/TC/66/2007 Rev.0 compatible with the existing equipment installed in division of Marvel make.
8
56111
448889.28
... More
Supply of Thermo Shrink Cable Jointing Kit for Quad Cable of 0.9 mm dia as per the RDSO specification.
20
2921
58435.8
... More
Supply of Thermo Shrink Cable Jointing Kit for Quad Cable of 1.4 mm dia as per the RDSO specification.
55
4000
220011
... More
Supply of EC socket box with 6 pin flat as RDSO specification No. IRSTC42/87 Amd. 3 or latest.
70
942
65944.2
... More
Preparation of cable route plan of buried S&T cables using Radio Detector 8200 GS or 1 Similar model GPS Model, DGPS and Drone for Per Trench per Km. For existing cables as per the instruction of Engineer-in-charge. Submission of Drone Report in Hard copy 1 set and DGPS output in KMZ File Format
-
-
3574008
... More
Supply and installation of RFID based electronic cable/pipe marker 22.5cms dia 1.5 m Depth range, 10 Digit Hexadecimal ID code 101.4khz frequency (Inspection: RITES)
1400
2853
3995446
... More
Supply and installation of RFID Marker locator ,8000 marker records,built in GPS module,1.5m depth range 4x20 Digits LCD display.(Inspection: Consignee/Site Incharge)
1
345470
345470.73
... More
Excavation of cable trench as per cable route plan, 1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes 4 etc., covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
18000
839
15102000
... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300 mm deep in hard rock (Drg prepared by contactor & approved by Engineer In charge) 5 for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his representative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. Refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a separate item in the schedule of work.
488
438
214100.24
... More
Cement concrete work for miscellaneous items in the ratio 1: 3: 6. Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
-
-
6
... More
Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm Dia & shall be done at the depth of minimum 1200 mm from the 7 ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtr long. The HDD with or without HDPE pipe as per direction of Engineer In charge. Note: DWC pipe supply is taken as separate item. This item also includes cable laying (HDD boring).
1000
1187
1187850
... More
Cutting of platform with tile/rock cutting machine or manually to 30 cm depth and 12 cm wide approx. by removing slabs/tiles neatly and re-filling the trench with the excavated soil and restoring the top surface to its original condition with smooth finish.
2000
97
195220
... More
Fixing of 100 mm dia GI pipes to carry all the cable at the cabins, Stations, cable huts & other buildings etc.,
700
21
14945
... More
Fixing of GI pipe (100 mm dia.) on Major/Minor/Culverts bridges using above supply item. (Sr. No. 2) 11
2300
565
1301570
... More
Laying of 6 Quad cable in excavated trench
70000
7
558600
... More
Laying and jointing of PIJF cable in the excavated trench, inside GI pipe, DWC pipe etc. and inserting the cable in building taking due care while transporting and laying.
5000
3
19650
... More
Supply and installation of Maintenance Free Safe Earthing for Telecom Installations as per specification No. RDSO /SPN/TC/197/2008 with latest amendments consisting of single earth pit (Ring Earth).
32
15240
487697.28
... More
Supply and installation of Class -B type lightening arrester for 100 KA 10/350 micro 14 second for single phase supply along with Class -C type surge arrester for 40 KA 8/20 micro second for single phase supply as per RDSO Specification no. RDSO/SPN/TC/98/2011 Rev.0 or latest with housing arrangement.
10
10520
105205.6
... More
Fixing and termination of metal DP box 20 pair with locking arrangement fitted with krone module. 16
30
409
12283.5
... More
Making of straight through joint for Quad cable. 17
20
1386
27721.2
... More
Making of Derivation through joint for Quad cable.
55
1175
64669
... More
Supply and placing of one layer of standard size of 'B' grade quality bricks of the local make spreading on cables laid.
70000
15
1117900
... More
Fabrication of EC socket box, assembly and erection of fabricated assembly at the location indicated as per direction of Engineer in charge. This includes cutting of rails to required size, supply and welding of GI Pipe and base plate, fixing of EC Socket box, transportation of material to 19 site, digging bf pit and erection of whole assembly at site. The work also includes the termination of 6 Quad/PIJF derivation cable on the strips of 6 pin EC socket inside emergency socket box. The fabrication of EC Socket box shall be done as per Drg No. Rail post will be supplied free of cost at the SSE (Tele) depot in full lengths. Note - In addition to above, the centre pins of EC sockets shall be terminated with a dedicated pair of 6 Quad cable (Derivate through the tail PIJF cable) in the entire block section so as to provide magneto/auto telephone communication from each EC socket.
70
4216
295136.1
... More
Fixing of EC sockets complete with termination of 6 Quad /PIJF derivation cable on the 20 strip of 6 pin EC socket inside the EC socket box on a good quality laminated boards at SM building, cabins, Sub stations, tunnels and wherever necessary as per instructions of the engineer in charge at site. The work includes painting of the metallic portion of the socket assembly using enamel paint.
70
488
34209.7
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements