Western Railway Tender

Providing plug point, 15/16 Amp on separate board - The price shall cover for providing modular power plug point with flush type universal 5 pin socket and switch 15/16 Amp, 230 Volt AC, 50 Hz on separate surface mounted molded polypropylene switch board with modular cover plate of 4 suitable module with 1.5 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor and 1.0 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor in green colour as earthing wire of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing capping double lock type, ISI marked, make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions at an approximate distance up to 3 meter or as per site requirement. Molded polypropylene switch board shall be as per IS: 14772.

Wiring of sub-main with copper wire single-core 2.5 sq. mm in casing-capping/conduit - The price shall cover for wiring of two wire sub- 5 main with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/Gerard or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions.

Wiring of sub-main with copper wire, single core 2.5 sq. mm in existing casing-capping/ conduit - The price shall cover for wiring of two 6 wire sub-main with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in existing PVC casing-capping or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions.

Wiring of sub-main with copper wire single-core 4.0 sq. mm in casing-capping/conduit - The price shall cover for wiring of two wire sub- 7 main with 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/Gerard or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions.

Providing maintenance free earthing - The price shall cover for providing maintenance free earthing as per the following specifications - 1. High tensile-low carbon steel rod having diameter not less than 17 mm complying with requirements of BS 4360 Grade 43A or EN10025:2-004 S275JR, molecularly bonded by 99.99% pure high conductivity copper on outer surface with copper coating thickness of 250 micron or more, Length 3000 mm (minimum). Certificates from NABL approved labs shall be submitted with test results. 2. Copper earth bus-bar of size 250 mm x 50 mm x 6 mm having electrical conductivity of 101% IACS, minimum 99.9% copper content shall be exothermically welded to rod with 4 holes of 12 mm diameter (two on each side) for connecting earthing conductor. 3. Earth Enhancement compound should have characteristics as mentioned in the RDSO specifications. It should have low resistivity preferably below 0.2 Ohm-meter, supplied in sealed bags (minimum 75 kg per pit for 5' x 5' x 10' size pit and minimum 50 kg per pit for 300 mm bore type pit). The bags shall be marked with manufacturer's name or trade name, quality, Batch No. and date of manufacture. Certificates from NABL approved labs shall be submitted with test results, for at least following parameters - a. Composition of Earth Enhancement compound b. Resistivity - < 2 Ohm-meter c. pH value - > 7 but < 9 d. Moisture retaining capacity - > 10% at 105 degrees Celsius e. Water solubility - < 5% 4. Backfill 8 material - Good quality soil or excavated soil free from sand, gravel and stones shall be used for backfilling. 5. Earth pit of size 5 feet x 5 feet x 10 feet or min 300 mm bore up to 10 feet using earth auger shall be made. 6. Inspection chamber - A concrete box of 300 x 300 x 300 mm (inside dimensions) and 50 mm thickness of wall, with smooth cement plaster finish shall be provided on the top of the pit. A concrete lid, painted black, approximately 50 mm thick with pulling hooks shall be provided to cover the earth pit. PVC sleeve shall be provided in concrete wall to take out earthing connections. 7. On backside of the cover, date of the testing and average resistance value shall be written with yellow paint on black background. 8. Instead of copper bus- bar and strips mentioned in the drawing, a GI main bus-bar of minimum size 300 mm x 75 mm x 8 mm to be installed on nearby wall etc. It shall be connected to earthing with two GI strips of 50 mm x 6 mm size each, up to a distance of 10 meters from earth bus-bar (minimum 3 meters x 2 Nos GI strips to be supplied). 9. Earthing shall generally be carried out in accordance with the requirement of I.E. Rules, 1956, as amended from time to time and shall confirm to IS: 3043 of 1987 with latest amendment. 10. The earth value shall be measured and recorded at the site by painting on earth pit or nearest wall along with date of testing. It shall be less than 2 Ohms and neutral to earth voltage shall be less than 3 Volt. 11. Earthing performance after a year of installation shall be jointly checked and measured. It should be less than 2 Ohm. 12. General arrangement of the earth system shall be as per the drawing given in Annexure-XX of tender document.

Supply of energy efficient, star rated, mono block submersible pump set of capacity 1.0 HP and discharge of approximately 50 LPM at a head of approximately 40 meters at duty point - The price shall cover for supply of energy efficient, star-rated, mono-block, submersible pump set of 9 capacity 1.0 HP with delivery of approximately 50 LPM at a speed of 2880 RPM and at a total head (inclusive of all losses) of 40 meters (at duty point) for clean drinking water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three- phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform to relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti/Noria/ Pilot make.

Supply of energy efficient, star rated, submersible pump set of capacity 1.0 HP and discharge of approximately 50 LPM at a head of approximately 50 meters at duty point - The price shall cover for supply of energy efficient, star-rated, vertical submersible pump set of capacity 1.0 HP with discharge of approximately 50 LPM at a speed of 2880 RPM and at a total head of 50 meters (inclusive of all losses at duty point) for clean drinking 10 water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform to relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti/Noria/ Pilot make.

Supply of energy efficient, star rated, submersible pump set of capacity 2.0 HP, 10-stage and discharge of approximately 100 LPM at a head of approximately 50 meters at duty point - The price shall cover for supply of energy efficient, star-rated, vertical submersible pump set of capacity 2.0 HP with discharge of approximately 100 LPM at a speed of 2880 RPM and at a total head of 50 meters (inclusive of all losses at duty point) for clean 11 drinking water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three- phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform to relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti/Noria/ Pilot make.

Supply of three phase, energy efficient, star rated horizontal, mono-block submersible pump set of 7.5 HP capacity with discharge of approximately 1000 LPM at a head of approximately 40 meter at duty point - The price shall cover for supply of energy efficient, star-rated, mono-block, horizontal, submersible pump set of capacity 7.5 HP with delivery of approximately 1000 LPM at a speed of 2880 RPM and at a total head (inclusive of all 12 losses) of 40 meters (at duty point) for clean drinking water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to the relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, star rated, vertical submersible pump set of capacity 7.5 HP with discharge of approximately 430 LPM at a head of approximately 62 meters at duty point - The price shall cover for supply of energy efficient, star-rated, vertical submersible pump set of capacity 7.5 HP with delivery of approximately 430 LPM at a speed of 2880 RPM and at a total head (inclusive of all losses) of 62 meters (at duty point) 13 for clean drinking water. The pump shall conform to IS: 14220- 1994 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to the relevant clause of IS: 14220 - 1994 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, star rated, horizontal, mono-block submersible pump set of capacity 10.0 HP with discharge of approximately 1000 to 1250 LPM at a head of approximately 36 meter at duty point - The price shall cover for supply of energy efficient, star-rated, mono-block, horizontal, submersible pump set of capacity 10.0 HP with delivery of approximately 1000 to 1250 LPM at a speed of 2880 RPM and at a 14 total head (inclusive of all losses) of 36 meters (at duty point) for clean drinking water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to the relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, star rated, vertical submersible pump set of capacity 10.0 HP with discharge of approximately 430 LPM at a head of approximately 78 meters at duty point - The price shall cover for supply of energy efficient, star-rated, vertical, submersible pump set of capacity 10.0 HP with delivery of approximately 430 LPM at a speed of 2880 RPM and at a total head (inclusive of all losses) of 78 meters (at duty 15 point) for clean drinking water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to the relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, star rated, mono block submersible pump set of capacity 15.0 HP with discharge of approximately 1200 LPM at a head of approximately 40 meters at duty point - The price shall cover for supply of energy efficient, star-rated, mono-block, horizontal, submersible pump set of capacity 15.0 HP with delivery of approximately 1200 LPM at a speed of 2880 RPM and at a total head (inclusive of all losses) of 16 40 meters (at duty point) for clean drinking water. The pump shall conform to IS: 14220- 1994 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to the relevant clause of IS: 14220- 1994 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, star rated, vertical submersible pump set of capacity 15.0 HP with discharge of approximately 550 LPM at a head of approximately 94 meters at duty point - The price shall cover for supply of energy efficient, star-rated, vertical, submersible pump set of capacity 15.0 HP with a discharge of approximately 550 LPM at a speed of 2880 RPM approximately and at a total head (inclusive of all losses) of 17 94 meters (at duty point) for clean drinking water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to the relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/Waterman/Uneel/CRI/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, star rated, mono block, horizontal submersible pump set of capacity 20.0 HP with discharge of approximately 1500 LPM at a head of approximately 40 meters at duty point - The price shall cover for supply of energy efficient, star-rated, mono-block, horizontal submersible pump set of capacity 20.0 HP with delivery of approximately 1500 LPM at a speed of 2880 RPM and at a total head (inclusive of 18 all losses) of 40 meters (at duty point) for clean drinking water. The pump shall conform to IS: 14220- 1994 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to relevant clause of IS: 14220- 1994 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, star rated, vertical submersible pump set of capacity 20.0 HP with discharge of approximately 900 LPM at a head of approximately 75 meters at duty point - The price shall cover for supply of energy efficient, star-rated, vertical submersible pump set of capacity 20.0 HP with delivery of approximately 900 LPM at a speed of 2880 RPM and at a total head (inclusive of all losses) of 75 meters (at duty 19 point) for clean drinking water. The pump shall conform to IS: 8034 - 2002 with latest amendments and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to relevant clause of IS: 8034 - 2002 with latest amendments. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Supply of three phase, energy efficient, submersible sewage pump set of capacity 10.0 HP with discharge of approximately 67,200 LPH at a head of approximately 12.0 meter at duty point - The price shall cover for supply of energy efficient, submersible sewage pump set of capacity 10.0 HP 20 with delivery of approximately 67,200 LPH at a speed of 2900 RPM and at a total head (inclusive of all losses) of 12.0 meters (at duty point) for pumping of stagnant/accumulated/waste/surplus water. The pump shall have corrosion free body and shall be ready to use. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make.

Providing pump control panel with automation and suitable rating of power factor improvement capacitor and energy meter for up to 10.0 HP pump and removal of old control panel - The price shall cover for supply, fixing, testing and commissioning of pump motor control panel for 10.0 HP 21 pump as per the details given below - Pump Motor Control Panel, wall mounted type, fabricated from 16 SWG CRCA sheet steel totally enclosed, dust and vermin proof, water resistant and provided with double coating of red oxide and final coating of Siemens grey powder coating. The approximate size of panel shall be 800 x 700 x 300 mm (H x W x D). The pump control panel shall be suitable for operation on 415 Volt, three-phase, 50 Hz, AC supply and shall consist of the switchgears/accessories as detailed in Annexure-XX of tender document.

Providing pump control panel with automation and suitable rating of power factor improvement capacitor and energy meter for up to 12.5 HP pump and removal of old control panel - The price shall cover for supply, fixing, testing and commissioning of pump motor control panel for 10.0 HP 22 pump as per the details given below - Pump Motor Control Panel, wall mounted type, fabricated from 16 SWG CRCA sheet steel totally enclosed, dust and vermin proof, water resistant and provided with double coating of red oxide and final coating of Siemens grey powder coating. The approximate size of panel shall be 800 x 700 x 300 mm (H x W x D). The pump control panel shall be suitable for operation on 415 Volt, three-phase, 50 Hz, AC supply and shall consist of the switchgears/accessories as detailed in Annexure-XX of tender document.

Providing pump control panel with automation and suitable rating of power factor improvement capacitor and energy meter for up to 15.0 HP pump and removal of old control panel - The price shall cover for supply, fixing, testing and commissioning of pump motor control panel for 15.0 HP 23 pump as per the details given below - Pump Motor Control Panel, wall mounted type, fabricated from 16 SWG CRCA sheet steel totally enclosed, dust and vermin proof, water resistant and provided with double coating of red oxide and final coating of Siemens grey powder coating. The approximate size of panel shall be 800 x 700 x 300 mm (H x W x D). The pump control panel shall be suitable for operation on 415 Volt, three-phase, 50 Hz, AC supply and shall consist of the switchgears/accessories as detailed in Annexure-XX of tender document.

Providing pump control panel with automation and suitable rating of power factor improvement capacitor and energy meter for up to 20.0 HP pump and removal of old control panel - The price shall cover for supply, fixing, testing and commissioning of pump motor control panel for 20.0 HP 24 pump as per the details given below - Pump Motor Control Panel, wall mounted type, fabricated from 16 SWG CRCA sheet steel totally enclosed, dust and vermin proof, water resistant and provided with double coating of red oxide and final coating of Siemens grey powder coating. The approximate size of panel shall be 800 x 700 x 300 mm (H x W x D). The pump control panel shall be suitable for operation on 415 Volt, three-phase, 50 Hz, AC supply and shall consist of the switchgears/accessories as detailed in Annexure-XX of tender document.

Providing pump control panel with automation and suitable rating of power factor improvement capacitor and energy meter for up to 25.0 HP pump and removal of old control panel - The price shall cover for supply, fixing, testing and commissioning of pump motor control panel for 25.0 HP 25 pump as per the details given below - Pump Motor Control Panel, wall mounted type, fabricated from 16 SWG CRCA sheet steel totally enclosed, dust and vermin proof, water resistant and provided with double coating of red oxide and final coating of Siemens grey powder coating. The approximate size of panel shall be 800 x 700 x 300 mm (H x W x D). The pump control panel shall be suitable for operation on 415 Volt, three-phase, 50 Hz, AC supply and shall consist of the switchgears/accessories as detailed in Annexure-XX of tender document.

Providing uPVC, non-corrosive, hi-tech, high tensile column pipe 50 mm diameter - The price shall cover for supply, erection, testing and commissioning of uPVC Column pipe having nominal bore of 50 mm diameter, socket type, heavy grade, non-corrosive, Hi-tech, Hi-tensile of 26 approximate length 3 meters (10 feet) with coupling at one end with square thread, 'O' ring with SS key locking facility. The uPVC pipe shall be of Godavari/Captain/Duke/Jeet/Vivon/Finolex/Ashirvaad/Supreme/Falcon make. Note - One set of the following accessories shall be supplied by the contractor for maintenance of the pumps, suitable for 50 mm diameter uPVC column pipes - 1. Bottom adapter/connector - 1 No 2. Top adapter/connector- 1 No 3. Pump guard- 2 Nos 4. Inner jig- 1 No 5. Outer jig- 1 No 6. Lowering Fixture- 1 No

Providing uPVC, non-corrosive, hi-tech, high tensile column pipe 75 mm diameter - The price shall cover for supply, erection, testing and commissioning of uPVC Column pipe having nominal bore of 75 mm diameter, socket type, heavy grade, non-corrosive, Hi-tech, Hi-tensile of 27 approximate length 3 meters (10 feet) with coupling at one end with square thread, 'O' ring with SS key locking facility. The uPVC pipe shall be of Godavari/Captain/Duke/Jeet/Vivon/Finolex/Ashirvaad/Supreme/Falcon make. Note - One set of the following accessories shall be supplied by the contractor for maintenance of the pumps, suitable for 75 mm diameter uPVC column pipes - 1. Bottom adapter/connector - 1 No 2. Top adapter/connector- 1 No 3. Pump guard- 2 Nos 4. Inner jig- 1 No 5. Outer jig- 1 No 6. Lowering Fixture- 1 No

Providing accessories like non return valve, sluice valve, pressure gauge with siphon cock, bend, coupler, pipe fittings, top bottom set, rubber packing, clamps set, nuts, bolts etc. for 50 mm diameter column pipe - The price shall cover for supply and fixing of following accessories for the above pumps - 1. 50 mm diameter non-return valve, heavy duty, ISI marked with MS flange heavy duty and gasket conforming to IS: 5312 (latest), for collar thickness along with test certificate of make Karan/Kartar/BVI with nuts, bolts and washers ----- 1 No 2. 50 mm diameter C.I. Sluice valve heavy duty 28 ISI marked with MS heavy duty flange and gasket conforming to IS: 780 (latest), along with test certificate with nuts bolts and washers ---- 1 No 3. Heavy duty 90° bend 50 mm diameter with coupling at one end and M.S. heavy duty flange at other end ---- 2 Nos 4. ISI marked, pressure gauge of suitable capacity with siphon, stop cock, bend and coupler as per relevant IS ---- 1 No. 5. Supply and fixing of 50 mm diameter, M.S. supporting clamps set not less than 450 mm long with 4 holes fabricated from M.S. flat of size 100 x 10 mm for column pipe complete with 4 Nos of M.S. full threaded nut bolts washers of 16 mm diameter ---- 2 Set 6. Provision of information board of size 900 x 600 mm made from black anodized 18 SWG metal sheet with pump details printed on it as per site engineer's instructions ---- 1 No

Providing accessories like non return valve, sluice valve, pressure gauge with siphon cock, bend, coupler, pipe fittings, top bottom set, rubber packing, clamps set, nuts, bolts etc. for 75 mm diameter column pipe - The price shall cover for supply and fixing of following accessories for the above pumps - 1. 75 mm diameter non-return valve, heavy duty, ISI marked with MS flange heavy duty and gasket conforming to IS: 5312 (latest), for collar thickness along with test certificate of make Karan/Kartar/BVI with nuts, bolts and washers ----- 1 No 2. 75 mm diameter C.I. Sluice valve heavy duty 29 ISI marked with MS heavy duty flange and gasket conforming to IS: 780 (latest), along with test certificate with nuts bolts and washers ---- 1 No 3. Heavy duty 90° bend 70 mm diameter with coupling at one end and M.S. heavy duty flange at other end ---- 2 Nos 4. ISI marked, pressure gauge of suitable capacity with siphon, stop cock, bend and coupler as per relevant IS ---- 1 No. 5. Supply and fixing of 75 mm diameter, M.S. supporting clamps set not less than 450 mm long with 4 holes fabricated from M.S. flat of size 100 x 10 mm for column pipe complete with 4 Nos of M.S. full threaded nut bolts washers of 16 mm diameter ---- 2 Set 6. Provision of information board of size 900 x 600 mm made from black anodized 18 SWG metal sheet with pump details printed on it as per site engineer's instructions ---- 1 No

Supply of three-core, copper conductor, flat cable, 4.0 sq. mm - The price shall cover for supply, laying, testing and commissioning of flat 30 submersible, PVC insulated and sheathed cable with multi-stranded copper conductor having three cores of size 4.0 sq. mm conforming to IS: 694 (Part- I) or latest for submersible motor of Finolex/R.R. Kabel/Neocab/Jeet/Falcon make. A copy of Test Certificate along with the invoice of authorized dealer should be submitted along with the delivery challan.

Supply of three-core, copper conductor, flat cable, 6.0 sq. mm - The price shall cover for supply, laying, testing and commissioning of flat 31 submersible, PVC insulated and sheathed cable with multi-stranded copper conductor having three cores of size 6.0 sq. mm conforming to IS: 694 (Part- I) or latest for submersible motor of Finolex/R.R. Kabel/Neocab/Jeet/Falcon make. A copy of Test Certificate along with the invoice of authorized dealer should be submitted along with the delivery challan.

Supply of three-core, copper conductor, flat cable, 10.0 sq. mm - The price shall cover for supply, laying, testing and commissioning of flat 32 submersible, PVC insulated and sheathed cable with multi-stranded copper conductor having three cores of size 10.0 sq. mm conforming to IS: 694 (Part- I) or latest for submersible motor of Finolex/R.R. Kabel/Neocab/Jeet/Falcon make. A copy of Test Certificate along with the invoice of authorized dealer should be submitted along with the delivery challan.

Erection, testing and commissioning of new submersible pump after removing old pumps with all accessories - The price shall cover for 33 erection, testing and commissioning of submersible pumps complete with all standard accessories. The price shall also cover for removal of the existing pump and associated accessories from the bore/sump in a safe and secure manner and handing over the same to site in-charge at his office/stores on challan.