Western Railway Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Costs
EMD
₹ 1,72,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Rajkot Division- Signalling Work In Connection With Engineering Work (1)rajkot - okha - Ctr(p) - 11.568 Tkm, Trr (p) - 22.212 Tkm And Tsr (p) - 26.80 Tkm. (2)kanalus-sikka-trr (s)-1.550tkm & Rjt-okha-trr(s)-9.131tkm (total- 10.681tkm).(3)sunr-rjt(dn)-ctr(p)-9.793tkm, Trr(p)-10.614tkm & Tsr(p)- 3.750 Tkm.(4)rjt Div-ttr(cs+cmsc)-19 Sets.(5) Rjt Div-tbr 58.379 Tkm(tl),tbr 4.278 Tkm(loop Line) & Tbr Of 24 Nos (p&c).
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DRM-RJT-24-25-SnT-E-13-RAJKOT DIVISION-S AND T/WESTERN RLYTender No
DRM-RJT-24-25-SnT-E-13Tender Authority
Western Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of Drill bits 7.2 mm as per instruction of Engineer-in-charge. 5
80
145
11656
... More
GI wire 8 SWG (4mm dia) suitable for track circuit rail bonding.
400
73
29268
... More
Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & antioxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. (The 6 manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified.
60
1948
116880
... More
ARA Terminal blocks with links made of PBT Spec No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.
-
-
7
... More
Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.
30
281
8455.8
... More
Track feed battery chargers, 110V AC input, 2 to 6 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.
10
3316
33162.4
... More
PVC jacketed wire rope for Track Lead connections. PVC jacketed wire ropeshould be 10 of Galvanized steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) heathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material hould not be used.
1
5672
5672.47
... More
Cartridge fuse block made of PBT as per RDSO Drg No SA- 23748 Alt 4 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage uses. This also includes supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.
60
135
8154
... More
Desk type Electronic Magneto Telephone as per spec No IRS/TC-79/2000 or with latest amendments
10
3380
33805.5
... More
Point insulation Complete set as per RDSO Specification IRS: S-40/84 for L-Bracket, Switch bracket, Split-Stretcher bar & Gauge tie plates etc. (52Kg/60Kg as per site requirement)
50
1599
79950
... More
Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second or Superior
1
27121
27121.06
... More
Supply of digital Earth tester 4 Terminal for measurement of Earth resistance as per technical specifications
1
6345
6345.14
... More
Megger 100V to 500V X 20 mega ohms as per specification make: Fluke model No 1507,Motawani and similar or superier. (decided by engineer)
1
47592
47592.86
... More
"Mini AC/DC Low Current Clamp Meter as per Specn. High Sensitivity, Miniature type Clamp, Resolution of 0.1 mA for AC,1 mA for DC Current, Measurement range 0- 20 A, Make KEW, Fluke OR SIMILAR."
1
48180
48180.99
... More
Relay, AC Immune, plug-in-type, Style 'QTA2', DC Neutral track, 9 ohm DC 2F. 1B contacts, front and back contacts metal to carbon, complete with plug board, retaining clip & connectors confirming to BRS:939A, BRS:966 (Appendix F2), IRS:S 34 & IRS:S 23 & 60 (as applicable).
15
2596
38940
... More
FUSE ELECTRIC NON DETERIORATING TYPE LOW VOLTAGE FOR RLY SIGNALLING RATED CURRENT 16 AMPS RATED VOLTAGE 240 V AC / DC WITH CYLINDRICAL CAPS WITHOUT INDICATION. AS PER SPECN. NO. IRS:S-78/92 TO SUIT DRG. NO.SA 23748 ALT- 4.
40
58
2322.8
... More
Track Lead Junction Boxes as per C.Rly Drg. No. RST 11509 made from fiber glass along with terminal blocks.
20
1027
20553.4
... More
Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. 4
400
6
2524
... More
Supply of Drill bits 7.2 mm as per instruction of Engineer-in-charge. 5
20
145
2914
... More
GI wire 8 SWG (4mm dia) suitable for track circuit rail bonding.
100
73
7317
... More
Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & antioxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. (The 6 manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified.
10
1948
19480
... More
Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.
10
281
2818.6
... More
Track feed battery chargers, 110V AC input, 2 to 6 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.
4
3316
13264.96
... More
PVC jacketed wire rope for Track Lead connections. PVC jacketed wire ropeshould be 9 of Galvanized steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) heathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material hould not be used
0.5
-
2836.24
... More
Cartridge fuse block made of PBT as per RDSO Drg No SA- 23748 Alt 4 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage uses. This also includes supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.
20
135
2718
... More
Desk type Electronic Magneto Telephone as per spec No IRS/TC-79/2000 or with latest amendments
4
3380
13522.2
... More
Point insulation Complete set as per RDSO Specification IRS: S-40/84 for L-Bracket, Switch bracket, Split-Stretcher bar & Gauge tie plates etc. (52Kg/60Kg as per site requirement)
10
1599
15990
... More
Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second or Superior
1
27121
27121.06
... More
Supply of digital Earth tester 4 Terminal for measurement of Earth resistance as per technical specifications
1
6345
6345.14
... More
Megger 100V to 500V X 20 mega ohms as per specification make: Fluke model No 1507,Motawani and similar or superier. (decided by engineer)
1
47592
47592.86
... More
"Mini AC/DC Low Current Clamp Meter as per Specn. High Sensitivity, Miniature type Clamp, Resolution of 0.1 mA for AC,1 mA for DC Current, Measurement range 0- 20 A, Make KEW, Fluke OR SIMILAR."
1
48180
48180.99
... More
"Supply of in-built GNSS based cable route tracer with 10W, 500 mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, 17 with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTK enabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP and RTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200SG or similar."
1
1387100
1387100
... More
Relay, AC Immune, plug-in-type, Style 'QTA2', DC Neutral track, 9 ohm DC 2F. 1B contacts, front and back contacts metal to carbon, complete with plug board, retaining clip & connectors confirming to BRS:939A, BRS:966 (Appendix F2), IRS:S 34 & IRS:S 23 & 60 (as applicable).
10
2596
25960
... More
FUSE ELECTRIC NON DETERIORATING TYPE LOW VOLTAGE FOR RLY SIGNALLING RATED CURRENT 16 AMPS RATED VOLTAGE 240 V AC / DC WITH CYLINDRICAL CAPS WITHOUT INDICATION. AS PER SPECN. NO. IRS:S-78/92 TO SUIT DRG. NO.SA 23748 ALT- 4.
-
-
1
... More
Track Lead Junction Boxes as per C.Rly Drg. No. RST 11509 made from fiber glass along with terminal blocks.
10
1027
10276.7
... More
Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. 4
100
6
631
... More
Supply of Drill bits 7.2 mm as per instruction of Engineer-in-charge. 5
10
145
1457
... More
GI wire 8 SWG (4mm dia) suitable for track circuit rail bonding.
100
73
7317
... More
Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & antioxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. (The 6 manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified.
30
1948
58440
... More
ARA Terminal blocks with links made of PBT Spec No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.
100
71
7105
... More
Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.
10
281
2818.6
... More
Track feed battery chargers, 110V AC input, 2 to 6 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.
5
3316
16581.2
... More
PVC jacketed wire rope for Track Lead connections. PVC jacketed wire ropeshould be 10 of Galvanized steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) heathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material hould not be used.
0.5
-
2836.24
... More
Cartridge fuse block made of PBT as per RDSO Drg No SA- 23748 Alt 4 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage uses. This also includes supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.
30
135
4077
... More
Desk type Electronic Magneto Telephone as per spec No IRS/TC-79/2000 or with latest amendments
5
3380
16902.75
... More
Point insulation Complete set as per RDSO Specification IRS: S-40/84 for L-Bracket, Switch bracket, Split-Stretcher bar & Gauge tie plates etc. (52Kg/60Kg as per site requirement)
10
1599
15990
... More
Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second or Superior
1
27121
27121.06
... More
Supply of digital Earth tester 4 Terminal for measurement of Earth resistance as per technical specifications
1
6345
6345.14
... More
Megger 100V to 500V X 20 mega ohms as per specification make: Fluke model No 1507,Motawani and similar or superier. (decided by engineer)
1
47592
47592.86
... More
"Mini AC/DC Low Current Clamp Meter as per Specn. High Sensitivity, Miniature type Clamp, Resolution of 0.1 mA for AC,1 mA for DC Current, Measurement range 0- 20 A, Make KEW, Fluke OR SIMILAR."
2
48180
96361.98
... More
Relay, AC Immune, plug-in-type, Style 'QTA2', DC Neutral track, 9 ohm DC 2F. 1B contacts, front and back contacts metal to carbon, complete with plug board, retaining clip & connectors confirming to BRS:939A, BRS:966 (Appendix F2), IRS:S 34 & IRS:S 23 & 60 (as applicable).
10
2596
25960
... More
FUSE ELECTRIC NON DETERIORATING TYPE LOW VOLTAGE FOR RLY SIGNALLING RATED CURRENT 16 AMPS RATED VOLTAGE 240 V AC / DC WITH CYLINDRICAL CAPS WITHOUT INDICATION. AS PER SPECN. NO. IRS:S-78/92 TO SUIT DRG. NO.SA 23748 ALT- 4.
30
58
1742.1
... More
Track Lead Junction Boxes as per C.Rly Drg. No. RST 11509 made from fiber glass along with terminal blocks.
20
1027
20553.4
... More
Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. 4
500
6
3155
... More
Supply of Drill bits 7.2 mm as per instruction of Engineer-in-charge. 5
20
145
2914
... More
GI wire 8 SWG (4mm dia) suitable for track circuit rail bonding.
150
73
10975.5
... More
Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & antioxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. (The 6 manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified.
10
1948
19480
... More
ARA Terminal blocks with links made of PBT Spec No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.
100
71
7105
... More
Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.
20
281
5637.2
... More
Track feed battery chargers, 110V AC input, 2 to 6 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.
5
3316
16581.2
... More
PVC jacketed wire rope for Track Lead connections. PVC jacketed wire ropeshould be 10 of Galvanized steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) heathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material hould not be used.
1
5672
5672.47
... More
Cartridge fuse block made of PBT as per RDSO Drg No SA- 23748 Alt 4 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage uses. This also includes supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.
60
135
8154
... More
Desk type Electronic Magneto Telephone as per spec No IRS/TC-79/2000 or with latest amendments
5
3380
16902.75
... More
Point insulation Complete set as per RDSO Specification IRS: S-40/84 for L-Bracket, Switch bracket, Split-Stretcher bar & Gauge tie plates etc. (52Kg/60Kg as per site requirement)
50
1599
79950
... More
Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second or Superior
1
27121
27121.06
... More
Supply of digital Earth tester 4 Terminal for measurement of Earth resistance as per technical specifications
1
6345
6345.14
... More
Megger 100V to 500V X 20 mega ohms as per specification make: Fluke model No 1507,Motawani and similar or superier. (decided by engineer)
1
47592
47592.86
... More
Mini AC/DC Low Current Clamp Meter as per Specn. High Sensitivity, Miniature type Clamp, Resolution of 0.1 mA for AC,1 mA for DC Current, Measurement range 0- 20 A, Make KEW, Fluke OR SIMILAR.
2
48180
96361.98
... More
Supply of in-built GNSS based cable route tracer with 10W, 500 mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, 18 with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTK enabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP and RTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200SG or similar.
1
1387100
1387100
... More
Relay, AC Immune, plug-in-type, Style 'QTA2', DC Neutral track, 9 ohm DC 2F. 1B contacts, front and back contacts metal to carbon, complete with plug board, retaining clip & connectors confirming to BRS:939A, BRS:966 (Appendix F2), IRS:S 34 & IRS:S 23 & 60 (as applicable).
20
2596
51920
... More
FUSE ELECTRIC NON DETERIORATING TYPE LOW VOLTAGE FOR RLY SIGNALLING RATED CURRENT 16 AMPS RATED VOLTAGE 240 V AC / DC WITH CYLINDRICAL CAPS WITHOUT INDICATION. AS PER SPECN. NO. IRS:S-78/92 TO SUIT DRG. NO.SA 23748 ALT- 4.
80
58
4645.6
... More
Track Lead Junction Boxes as per C.Rly Drg. No. RST 11509 made from fiber glass along with terminal blocks.
20
1027
20553.4
... More
Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. 4
1000
6
6310
... More
Supply of Drill bits 7.2 mm as per instruction of Engineer-in-charge. 5
50
145
7285
... More
GI wire 8 SWG (4mm dia) suitable for track circuit rail bonding.
300
73
21951
... More
"Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & antioxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. (The 6 manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified. "
50
1948
97400
... More
ARA Terminal blocks with links made of PBT Spec No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.
200
71
14210
... More
Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.
50
281
14093
... More
Track feed battery chargers, 110V AC input, 2 to 6 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.
10
3316
33162.4
... More
PVC jacketed wire rope for Track Lead connections. PVC jacketed wire ropeshould be 10 of Galvanized steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) heathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material hould not be used.
3
5672
17017.41
... More
Cartridge fuse block made of PBT as per RDSO Drg No SA- 23748 Alt 4 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage uses. This also includes supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.
50
135
6795
... More
Desk type Electronic Magneto Telephone as per spec No IRS/TC-79/2000 or with latest amendments
5
3380
16902.75
... More
Point insulation Complete set as per RDSO Specification IRS: S-40/84 for L-Bracket, Switch bracket, Split-Stretcher bar & Gauge tie plates etc. (52Kg/60Kg as per site requirement)
50
1599
79950
... More
Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second or Superior
2
27121
54242.12
... More
Supply of digital Earth tester 4 Terminal for measurement of Earth resistance as per technical specifications
2
6345
12690.28
... More
Megger 100V to 500V X 20 mega ohms as per specification make: Fluke model No 1507,Motawani and similar or superier. (decided by engineer)
2
47592
95185.72
... More
"Mini AC/DC Low Current Clamp Meter as per Specn. High Sensitivity, Miniature type Clamp, Resolution of 0.1 mA for AC,1 mA for DC Current, Measurement range 0- 20 A, Make KEW, Fluke OR SIMILAR."
2
48180
96361.98
... More
"Supply of in-built GNSS based cable route tracer with 10W, 500 mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, 18 with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTK enabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP and RTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200SG or similar."
1
1387100
1387100
... More
Relay, AC Immune, plug-in-type, Style 'QTA2', DC Neutral track, 9 ohm DC 2F. 1B contacts, front and back contacts metal to carbon, complete with plug board, retaining clip & connectors confirming to BRS:939A, BRS:966 (Appendix F2), IRS:S 34 & IRS:S 23 & 60 (as applicable).
20
2596
51920
... More
Drilling of holes of different sizes in rails 7.2mm/ 12 mm/16mm/22mm 1500Nos@46'46910@
1500
39
59355
... More
Maintenence of Signalling gears required for execution of BCM/TTM/FRM work includes 1. Proper dressing of track lead jumpers as required by railway reprsentative at site before and after connecting of BCM/TTM/FRM machines. This includes replacement of defective jumpers. Jumpers will be provided by railway and / or 2.- Fixing, installation and testing of rodding sets for point 2 machines/EPD and FPL of point including all associated geras of mech. points as per direction of railway representative at site, and / or 3. All damaged cables due to BCM/TTM/FRM work should be meggeres properly and if required should be replaced by contractor as directed by railway representative at site. Cable will be supplied by railways. The team to be provided for this work should comprise of Black Smith-1 no., Fitter-1 no and Hepler -2 nos. also it include any work of EOLB or sliding boom and earthing arrangement of Signalling gears, Any other work as per instruction of Railway Engineer. All T &P & jigs required to execute the work will be supplied by contractor.
60
4645
278708.4
... More
As and when required by the Engineer in charge arranging/providing of labours for various safety related works such as protection of track etc. with contractors T&P, equipment etc.Scope of work as furnished in the tender and directed by the Engineer in charge.
30
858
25759.8
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination rack etc at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
-
-
4
... More
Excavation of cable trench as per cable route plan,1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtrs wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from 5 bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
80
296
23727.2
... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtrs to 0.6 Mtrs wide 6 and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No.CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.
10
385
3858.8
... More
Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.
10
707
7077.3
... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300mm deep in hard rock ( Drg prepared by contactor & approved by Engineer In 8 charge)for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his reprenstative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a seperate item in the schedule of work.
10
547
5476.6
... More
Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. 9 The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe will be supplied by railway. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.
100
1301
130113
... More
Cement concrete work for miscellaneous items in the ratio 1 : 3 : 6 . Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
20
3900
78003.2
... More
Supplying and placing of one layer of standard size of 'B' grade quality bricks of the local make spreading on cables laid.Lengthwise (up to 2 cables).
100
17
1783
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item 12 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.
3000
9
29520
... More
Supply and placing of Half Round RCC pipes & collars of 150 mm internal dia, 2 meter long (or two pieces of 1 meter long) along with collars as per IS No. 458/2003 of NP type
50
402
20112.5
... More
Supply and installation of RCC cable route marker engraved and painted on both side along the route every 50mm and route diversion as per Drg. No 4014/00/CC4 or latest/ Stone marker.
10
495
4951.9
... More
Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 cement and sand mixture both sides, 20 mm thick each with contractor's owned class II bricks, including excavation, curing, grouting, bolting etc. wherever required. Bricks sand and cement to be supplied by the contractor.
10
2195
21959.9
... More
"Erection, Fitting and Rail connection of Track Lead Junction Box on two supports 16 (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be done as per Drg. No. S&T/Const./JHS/T 115 & instructions of Rly engineer at site. "
40
1458
58336
... More
Provision of bonding with GI wire 4mm dia ( 8 SWG) for track jumper & fish plate joints 17 bonds. This will include drilling of 7.0/7.1/7.2 mm dia holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Note : - item no. 1 (drilling of holes) of Execution (Sch-B) is differnet item, it is note a part of this item.
250
197
49475
... More
Refixing of electrical point machine, ground connection during phase working (Non 18 interlocked working) after removing the existing fitting if any, adjustment if necessary, cable termination, wiring , testing and commissioning of electrically operated point, fixing and connecting point indicator on derail switch if necessary. The work shall be done as per extant practice on WR & the instruction of Railway Engineer at site.
10
2896
28964.9
... More
Shifting of Exposed cables. The item includes Removal of exposed cable from existing trench & laying the same in new trenches. Digging, Placing of capping/Half round RCC pipe covered separately
0.5
-
3917.81
... More
Removal & reinstallation of Axle Counter/Tx-Rx coil/TLJB (each set consists of web mounting type TX & RX Coils). This will be executed as per instruction of site supervisor.
10
1841
18419.2
... More
Drilling of holes of different sizes in rails 7.2mm/ 12 mm/16mm/22mm
200
39
7914
... More
As and when required by the Engineer in charge arranging/providing of labours for various safety related works such as protection of track etc. with contractors T&P, equipment etc.Scope of work as furnished in the tender and directed by the Engineer in charge.
30
858
25759.8
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination 3 rack etc at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
100
251
251
... More
Excavation of cable trench as per cable route plan,1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtrs wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from 4 bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
30
296
8897.7
... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtrs to 0.6 Mtrs wide and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd 5 separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No.CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.
5
385
1929.4
... More
Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.
5
707
3538.65
... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300mm deep in hard rock ( Drg prepared by contactor & approved by Engineer In 7 charge)for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his reprenstative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a seperate item in the schedule of work.
5
547
2738.3
... More
"Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. 8 The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe will be supplied by railway. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. "
20
1301
26022.6
... More
Cement concrete work for miscellaneous items in the ratio 1 : 3 : 6 . Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
5
3900
19500.8
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item 10 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.
2000
9
19680
... More
Supply and placing of Half Round RCC pipes & collars of 150 mm internal dia, 2 meter long (or two pieces of 1 meter long) along with collars as per IS No. 458/2003 of NP type
45
402
18101.25
... More
Supply and installation of RCC cable route marker engraved and painted on both side along the route every 50mm and route diversion as per Drg. No 4014/00/CC4 or latest/ Stone marker.
10
495
4951.9
... More
Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 13 cement and sand mixture both sides, 20 mm thick each with contractor's owned class II bricks, including excavation, curing, grouting, bolting etc. wherever required. Bricks sand and cement to be supplied by the contractor.
10
2195
21959.9
... More
Erection, Fitting and Rail connection of Track Lead Junction Box on two supports 14 (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be done as per Drg. No. S&T/Const./JHS/T 115 & instructions of Rly engineer at site.
10
1458
14584
... More
Provision of bonding with GI wire 4mm dia ( 8 SWG) for track jumper & fish plate joints 15 bonds. This will include drilling of 7.0/7.1/7.2 mm dia holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Note : - item no. 1 (drilling of holes) of Execution (Sch-B) is differnet item, it is note a part of this item.
100
197
19790
... More
Shifting of Exposed cables. The item includes Removal of exposed cable from existing trench & laying the same in new trenches. Digging, Placing of capping/Half round RCC pipe covered separately
0.5
-
3917.81
... More
Drilling of holes of different sizes in rails 7.2mm/ 12 mm/16mm/22mm
100
39
3957
... More
As and when required by the Engineer in charge arranging/providing of labours for various safety related works such as protection of track etc. with contractors T&P, equipment etc.Scope of work as furnished in the tender and directed by the Engineer in charge.
30
858
25759.8
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination 3 rack etc at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
100
251
251
... More
Excavation of cable trench as per cable route plan,1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtrs wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from 4 bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
30
296
8897.7
... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtrs to 0.6 Mtrs wide 5 and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No.CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.
10
385
3858.8
... More
Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.
5
707
3538.65
... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300mm deep in hard rock ( Drg prepared by contactor & approved by Engineer In 7 charge)for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his reprenstative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a seperate item in the schedule of work.
5
547
2738.3
... More
"Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. 8 The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe will be supplied by railway. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. "
50
1301
65056.5
... More
Cement concrete work for miscellaneous items in the ratio 1 : 3 : 6 . Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
10
3900
39001.6
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item 10 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.
2000
9
19680
... More
Supply and placing of Half Round RCC pipes & collars of 150 mm internal dia, 2 meter long (or two pieces of 1 meter long) along with collars as per IS No. 458/2003 of NP type
20
402
8045
... More
Supply and installation of RCC cable route marker engraved and painted on both side along the route every 50mm and route diversion as per Drg. No 4014/00/CC4 or latest/ Stone marker.
10
495
4951.9
... More
Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 13 cement and sand mixture both sides, 20 mm thick each with contractor's owned class II bricks, including excavation, curing, grouting, bolting etc. wherever required. Bricks sand and cement to be supplied by the contractor.
10
2195
21959.9
... More
Erection, Fitting and Rail connection of Track Lead Junction Box on two supports 14 (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be done as per Drg. No. S&T/Const./JHS/T 115 & instructions of Rly engineer at site.
10
1458
14584
... More
Provision of bonding with GI wire 4mm dia ( 8 SWG) for track jumper & fish plate joints 15 bonds. This will include drilling of 7.0/7.1/7.2 mm dia holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Note : - item no. 1 (drilling of holes) of Execution (Sch-B) is differnet item, it is note a part of this item.
20
197
3958
... More
Refixing of electrical point machine, ground connection during phase working (Non 16 interlocked working) after removing the existing fitting if any, adjustment if necessary, cable termination, wiring , testing and commissioning of electrically operated point, fixing and connecting point indicator on derail switch if necessary. The work shall be done as per extant practice on WR & the instruction of Railway Engineer at site.
2
2896
5792.98
... More
Shifting of Exposed cables. The item includes Removal of exposed cable from existing trench & laying the same in new trenches. Digging, Placing of capping/Half round RCC pipe covered separately
0.2
-
1567.12
... More
Removal & reinstallation of Axle Counter/Tx-Rx coil/TLJB (each set consists of web mounting type TX & RX Coils). This will be executed as per instruction of site supervisor.
3
1841
5525.76
... More
Drilling of holes of different sizes in rails 7.2mm/ 12 mm/16mm/22mm
500
39
19785
... More
As and when required by the Engineer in charge arranging/providing of labours for various safety related works such as protection of track etc. with contractors T&P, equipment etc.Scope of work as furnished in the tender and directed by the Engineer in charge.
60
858
51519.6
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination 3 rack etc at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
100
251
251
... More
Excavation of cable trench as per cable route plan,1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtrs wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from 4 bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
20
296
5931.8
... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtrs to 0.6 Mtrs wide and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No.CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.
10
385
3858.8
... More
Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.
5
707
3538.65
... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300mm deep in hard rock ( Drg prepared by contactor & approved by Engineer In 7 charge)for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his reprenstative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a seperate item in the schedule of work.
5
547
2738.3
... More
"Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. 8 The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe will be supplied by railway. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. "
30
1301
39033.9
... More
Cement concrete work for miscellaneous items in the ratio 1 : 3 : 6 . Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
10
3900
39001.6
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item 10 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.
1000
9
9840
... More
"Erection, Fitting and Rail connection of Track Lead Junction Box on two supports 11 (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be done as per Drg. No. S&T/Const./JHS/T 115 & instructions of Rly engineer at site. "
10
1458
14584
... More
Provision of bonding with GI wire 4mm dia ( 8 SWG) for track jumper & fish plate joints 12 bonds. This will include drilling of 7.0/7.1/7.2 mm dia holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Note : - item no. 1 (drilling of holes) of Execution (Sch-B) is differnet item, it is note a part of this item.
100
197
19790
... More
Refixing of electrical point machine, ground connection during phase working (Non 13 interlocked working) after removing the existing fitting if any, adjustment if necessary, cable termination, wiring , testing and commissioning of electrically operated point, fixing and connecting point indicator on derail switch if necessary. The work shall be done as per extant practice on WR & the instruction of Railway Engineer at site.
4
2896
11585.96
... More
Shifting of Exposed cables. The item includes Removal of exposed cable from existing trench & laying the same in new trenches. Digging, Placing of capping/Half round RCC pipe covered separately
0.5
-
3917.81
... More
Drilling of holes of different sizes in rails 7.2mm/ 12 mm/16mm/22mm
-
-
1
... More
As and when required by the Engineer in charge arranging/providing of labours for various safety related works such as protection of track etc. with contractors T&P, equipment etc.Scope of work as furnished in the tender and directed by the Engineer in charge.
100
858
85866
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination 3 rack etc at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
200
502
502
... More
Excavation of cable trench as per cable route plan,1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtrs wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from 4 bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
30
296
8897.7
... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtrs to 0.6 Mtrs wide 5 and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No.CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.
20
385
7717.6
... More
Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.
10
707
7077.3
... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300mm deep in hard rock ( Drg prepared by contactor & approved by Engineer In 7 charge)for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his reprenstative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a seperate item in the schedule of work.
10
547
5476.6
... More
Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. 8 The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe will be supplied by railway. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.
50
1301
65056.5
... More
Cement concrete work for miscellaneous items in the ratio 1 : 3 : 6 . Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
10
3900
39001.6
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item 10 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.
2000
9
19680
... More
Supply and placing of Half Round RCC pipes & collars of 150 mm internal dia, 2 meter long (or two pieces of 1 meter long) along with collars as per IS No. 458/2003 of NP type
20
402
8045
... More
Supply and installation of RCC cable route marker engraved and painted on both side along the route every 50mm and route diversion as per Drg. No 4014/00/CC4 or latest/ Stone marker.
10
495
4951.9
... More
Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 13 cement and sand mixture both sides, 20 mm thick each with contractor's owned class II bricks, including excavation, curing, grouting, bolting etc. wherever required. Bricks sand and cement to be supplied by the contractor.
10
2195
21959.9
... More
"Erection, Fitting and Rail connection of Track Lead Junction Box on two supports 14 (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length. This will include drilling of holes for track lead/side connections on rail. The work shall be done as per Drg. No. S&T/Const./JHS/T 115 & instructions of Rly engineer at site. "
20
1458
29168
... More
Provision of bonding with GI wire 4mm dia ( 8 SWG) for track jumper & fish plate joints 15 bonds. This will include drilling of 7.0/7.1/7.2 mm dia holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Note : - item no. 1 (drilling of holes) of Execution (Sch-B) is differnet item, it is note a part of this item.
50
197
9895
... More
Refixing of electrical point machine, ground connection during phase working (Non 16 interlocked working) after removing the existing fitting if any, adjustment if necessary, cable termination, wiring , testing and commissioning of electrically operated point, fixing and connecting point indicator on derail switch if necessary. The work shall be done as per extant practice on WR & the instruction of Railway Engineer at site.
24
2896
69515.76
... More
Shifting of Exposed cables. The item includes Removal of exposed cable from existing trench & laying the same in new trenches. Digging, Placing of capping/Half round RCC pipe covered separately
1
7835
7835.62
... More
Removal & reinstallation of Axle Counter/Tx-Rx coil/TLJB (each set consists of web mounting type TX & RX Coils). This will be executed as per instruction of site supervisor.
25
1841
46048
... More
Maintenence of Signalling gears required for execution of BCM/TTM/FRM work includes 1. Proper dressing of track lead jumpers as required by railway reprsentative at site before and after connecting of BCM/TTM/FRM machines. This includes replacement of defective jumpers. Jumpers will be provided by railway and / or 2.- Fixing, installation and testing of rodding sets for point 19 machines/EPD and FPL of point including all associated geras of mech. points as per direction of railway representative at site, and / or 3. All damaged cables due to BCM/TTM/FRM work should be meggeres properly and if required should be replaced by contractor as directed by railway representative at site. Cable will be supplied by railways. The team to be provided for this work should comprise of Black Smith-1 no., Fitter-1 no and Hepler -2 nos. also it include any work of EOLB or sliding boom and earthing arrangement of Signalling gears, Any other work as per instruction of Railway Engineer. All T &P & jigs required to execute the work will be supplied by contractor.
50
4645
232257
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%