Western Railway Tender

Providing plug point 16 Amp in concealed manner on separate board with modular accessories - The price shall cover for providing power plug point with modular type universal socket and switch, 16 Amp, 230 Volt, AC on separate board with modular accessories. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havell's/Luminous make. The price shall also cover for concealed wiring of plug point with 2.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/Prestoplast/Gerard make.

Providing board with two switches and two sockets, 6 Amp in concealed manner with modular accessories - The price shall cover for providing multi-plug point board (switch, 6 Amp - 2 Nos and universal socket, 6 Amp - 2 Nos) with modular type universal five-pin socket and switch, 6 Amp, 230 Volt, AC with modular accessories. The accessories shall be of modular type of C&S/MK/North West/L&T/ 5 Crabtree/Siemens/Anchor/Legrand/ Havell's/Luminous make. The price shall also cover for concealed wiring of board with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.0 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/ Prestoplast/Gerard make.

Providing board with four switches and four sockets, 6 Amp in concealed manner with modular accessories - The price shall cover for providing multi-plug point board (switch, 6 Amp - 4 Nos and universal socket, 6 Amp - 4 Nos) with modular type universal five-pin socket and switch, 6 Amp, 230 Volt, AC with modular accessories. The accessories shall be of modular type of C&S/MK/North West/L&T/ 6 Crabtree/Siemens/Anchor/Legrand/ Havell's/Luminous make. The price shall also cover for concealed wiring of board with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.0 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/ Prestoplast/Gerard make.

Concealed wiring of sub-main with 2.5 sq. mm in PVC conduit - The price shall cover for concealed 7 wiring of sub main with two-wire single core 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit.

Concealed wiring of sub-main with 4.0 sq. mm in PVC conduit - The price shall cover for concealed 8 wiring of sub main with two-wire single core 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit.

Wiring of light/fan/exhaust fan points in PVC casing-capping/conduit - The price shall cover for wiring of light/fan/exhaust fan point with 1.5 sq. mm, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS and 1.0 sq. mm, single-core, multi- stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to 9 relevant and latest IS in medium grade PVC casing-capping double lock type, ISI marked of make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions with surface mounted molded polypropylene switch board with modular cover plate of suitable size including switches/angular holders/ceiling rose. Space shall be kept on board to accommodate modular electronic fan regulator. Molded polypropylene switch board shall be as per IS: 14772.

Providing plug point 6 Amp in existing board - The price shall cover for providing plug point with modular type universal socket and switch, 6 Amp, 230 Volt, AC on existing board. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havell's/Luminous make.

Providing plug point, 6 Amp on separate board - The price shall cover for providing modular plug 11 point with flush type universal socket and switch 5/6 Amp, 230 Volt AC, 50 Hz on separate surface mounted molded polypropylene switch board with modular cover plate of suitable module with 1.5 mm2 multi-stranded, PVC insulated, unsheathed FRLS copper conductor and 1.0 mm2 multi-stranded, PVC insulated, unsheathed FRLS copper conductor in green colour as earthing wire of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing capping double lock type, ISI marked, make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/ Gerard as per site conditions at an approximate distance up to 3 meter or as per site requirement. Molded polypropylene switch board shall be as per IS: 14772.

Providing board with four switches and four sockets, 6 Amp - The price shall cover for wiring of multi-plug point (switch, 6 Amp - 4 nos and socket, 6 Amp - 4 nos) on separate surface mounted polypropylene switch board with modular cover plate of suitable module with 2.5 sq. mm PVC insulated, unsheathed, multi- 12 stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire in medium grade PVC casing capping, double lock type, ISI marked of Modi/Precision/Gerard/Prestoplast make or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions at an approximate distance up to 3.0 meter or as per site requirement. PVC box shall be as per IS: 14772.

Providing plug point, 15/16 Amp on separate board in PVC casing-capping/ conduit - The price shall cover for providing modular power plug point with flush type universal 5 pin socket and switch 15/16 Amp, 230 Volt AC, 50 Hz on separate surface mounted molded polypropylene switch board with modular cover plate of 13 suitable module with 1.5 mm2 multi-stranded, PVC insulated, unsheathed FRLS copper conductor and 1.0 mm2 multi-stranded, PVC insulated, unsheathed FRLS copper conductor in green colour as earthing wire of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing capping double lock type, ISI marked, make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions at an approximate distance up to 3 meter or as per site requirement. Molded polypropylene switch board shall be as per IS: 14772.

Wiring of sub-main with copper wire, single-core 2.5 sq. mm in casing-capping/conduit - The price shall cover for wiring of two wire sub-main with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS 14 copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/Gerard or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions.

Wiring of sub-main with copper wire, single-core, 2.5 sq. mm in existing PVC casing-capping - The price shall cover for wiring of two wire sub-main with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, 15 FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in existing PVC casing-capping or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions.

Wiring of sub-main with copper wire, single-core, 4.0 sq. mm in PVC casing-capping - The price shall cover for wiring of two wire sub-main with 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS 16 copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in existing PVC casing-capping or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions.

Wiring of sub-main with copper wire, single-core, 4.0 sq. mm in existing PVC casing-capping - The price shall cover for wiring of two wire sub-main with 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, 17 FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in existing PVC casing-capping or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions.

Fixing, testing and commissioning of ceiling fan - The price shall cover for fixing, testing and commissioning of ceiling fan on existing hook and its connection by FRPVC insulated, flexible copper cord, 19 1100Volt grade, 24/0.20mm from existing ceiling rose with earth connection. A suitable suspension clamp made from G.I. flat of 40 x 6 mm with MS 'S' shaped hook of diameter not less than 10 mm shall be provided as per site requirement if fan hook is not available and this is included in the scope of work. The ceiling fans shall be supplied by railways at site engineer's office/store.

Providing electronic fan regulator, modular type - The price shall cover for supply, fixing, testing 20 and commissioning of hum-free modular type Electronic fan regulator suitable for 80/100 Watt ceiling fan of step type with 'OFF' position, surface/flush type on existing board and its connection from existing supply. Miniature switch type regulators shall not be accepted. The regulator shall be of Anchor-Roma/ Cona/Leader/Crabtree/Legrand/C&S/HPL/Indo Asian/Havell's/Standard/Bentec/Elleys/Precision make.

Providing Exhaust Fan, 300 mm sweep, heavy duty with louver/bird guard - The price shall cover for supply of heavy duty, industrial Exhaust Fan of metal body, 300 mm sweep with bird guard operating on 230 21 Volt, 50 Hz AC supply complete with all accessories of make Crompton Greaves/GEC/ Almonard/Usha/Bajaj. The price shall also cover for fixing, testing and commissioning of the Exhaust Fan on existing pocket with rake bolts/Anchor fasteners of suitable size as per site condition, and its connection from existing ceiling rose with three-core, 24/0.20 mm size, FRPVC insulated, flexible copper wire of 1100 Volt grade.

Providing decorative wall bracket fan, 400 mm sweep - The price shall cover for supply of decorative wall mounted bracket fan, 400 mm sweep, operating on 230 Volt, 50 Hz AC supply, oscillating type, 22 90° swing with three-speed regulator, three aerodynamically balanced blades made of aluminium and base made of MS pipe/plate. Make - Crompton Greaves/Usha/Orient/Bajaj/GEC/Almonard. The price shall also cover for fixing, testing and commissioning of bracket fan on wall by suitable size of MS clamps and its connection from existing socket/supply point as per site requirement. The wall bracket fan shall be got approved from site engineer before supply.

Providing Ray Roll plug and socket, 20 Amp with MCB DP, 16/20 Amp in weather proof box - The 23 price shall cover for supply, erection, testing and commissioning of power plug board with one MCB DP 16/20 Amp, ray-roll socket 16/20 Amp and LED indication lamp in weather proof MS enclosure. The MCB shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/CGL/Schneider make. The MS enclosure shall be properly earthed.

Providing fly catcher - The price shall cover for supply, fixing, testing and commissioning of fly catcher having stainless steel enclosure with high voltage transformer and twin two-feet, Ultraviolet fluorescent 24 tube, 20 Watt to work on 230 Volt, 50 Hz, single phase AC supply. Approximate size of complete assembly shall be - 25" (L) x9.5" (B) x16" (H) of make AVRO FLYKIL-LITE model Killer 1000 or equivalent of Shree Aerodynamic products/TECHNOCRAFT. The flycatcher shall be fitted by suitable size of clamps as per the instructions of site in-charge and shall be connected by three- core, PVC insulated, flexible copper wire of size 48/0.20 mm from existing catenaries/light point as per site requirement through flexible PVC conduit.

Supply five-star rated storage geyser of 25 liter capacity - The price shall cover for supply of energy efficient, five-star BEE rating, storage type geyser, 25 liter capacity, heating element of 2000 Watt, having 25 inner tank material of mild steel with glass lined coating and outer body of ABS + PP (rust proof), adjustable stem type thermostats, fusible safety plug operating on pressure of 8 Bar and 4 in 1 multifunctional safety valve. The geyser shall be ISI marked with inlet and outlet hoses of suitable diameter and length and gun metal inlet stop valve. The geyser shall be supplied complete with three-core, PVC insulated, copper wire, ISI marked and 15 Amp plug top. The geyser shall be of VENUS/RACOLD/ SPHEREHOT/BAJAJ/CROMPTON GREAVES make.

Fixing, testing and commissioning of storage type geyser of capacity 25 Liter complete with all 26 accessories - The price shall cover for fixing, testing and commissioning of storage type geyser, 25 liter capacity of Item No. 25 above. The scope of work includes supply and fixing of Anchor fasteners, nut bolts, supply of accessories, modification/rectification of civil works such as inlet-outlet water connection pipes of suitable capacity and size, plumbing, wiring etc. required to install the Geyser at desired location.

Supply, fixing, testing and commissioning of five-star rated, inverter type, Split Air Conditioner unit, 1.5 TR capacity - The price shall cover for supply of five-star rated, split AC unit, 1.5 TR capacity, inverter type confirming to IS: 1391 (latest) and as per the below mentioned specifications - Nominal cooling capacity - 1.5 Ton / 4500 kcal/hour Refrigerant - Eco friendly Technology - Inverter (Variable speed) Type of AC - High wall split AC 27 BEE Star rating - Five star Coil Material - Copper The price shall also cover for fixing, testing and commissioning of the split AC as per the site-engineer's instructions/requirements with all associated wiring, copper pipings, existing drain piping, existing MS outdoor stand. This shall also cover for making a hole of suitable diameter in the existing brick masonry/RCC wall for laying of cables, pipes etc from indoor to outdoor unit in a neat and aesthetic manner. The hole shall be sealed with plaster of Paris to prevent entry of insects, rain water, lizards etc. Manufacturer's recommendations/ instructions shall be strictly followed. The make split ACs shall be VOLTAS/BLUE STAR/CARRIER/HITACHI/PANASONIC/ONIDA or any other make approved by Sr. DEE (Power) Vadodara.

Supply of material and providing rigid PVC drain pipe - The price shall cover for supply and fixing of rigid uPVC pipe medium grade of required diameter from indoor unit to main drain hole for draining of condensed water from cooling coil (Indoor unit) to main drain discharge point.

Supply and fixing of MS stand for outdoor unit of Split Air Conditioner - The price shall cover for 29 fabrication, supply, fixing and commissioning of MS angle frame/stand made from MS angle for outdoor unit of split AC. The size of angle shall be 40 x 40 x 6 mm painted with two coats of red oxide primer and finished with one coat of black enamel paint. The angle stand shall be fixed at site with anchor bolts. Necessary civil works involved are included in the scope of work.

Providing Distribution Board with incomer MCB DP, 16/32 Amp - 1 No, RCBO, 25 Amp - 1 No and outgoing MCB SP, 6/10/16 Amp - 2 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. 30 The DB shall be equipped with incomer MCB DP 16/32 Amp - 1 No, RCBO, two-pole, 30 mA sensitivity, 25 Amp - 1 No and outgoing MCB SP, 6/10/16 Amp - 2 Nos. The MCBs/RCBOs shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing lighting control board with MCB DP 32 Amp - 1 No, Time Switch, 16 Amp - 1 No and Single Phase Contactor, 32 Amp - 1 No - The price shall cover for supply, fixing, testing and commissioning of lighting control board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The board shall be equipped with MCB DP, 10 KA breaking capacity, 32 Amp rating - 1 No, Time switch, 16 Amp - 1 No and Single phase 31 contactor of rating 32 Amp - 1 No. The MCB shall be of ABB/L&T (Hagar)/ HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL make, the contactor shall be of L&T/BCH/C&S/CGL/ Schneider/Siemens make and Digital Time Switch "CRONO" of L&T make or similar of Siemens/Minilec make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing Distribution Board with MCB DP 32 Amp and RCBO, two-pole, 25 Amp with enclosure - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant 32 with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB DP 32 Amp - 2 Nos and RCBO, two-pole, 30 mA sensitivity, 25 Amp - 2 Nos. The MCBs/RCBOs shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing Distribution Board with incomer MCB DP, 16/32 Amp - 1 No, RCBO, two-pole, 25 Amp - 1 No and outgoing MCB DP, 6/10/16 Amp - 4 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB DP 16/32 Amp - 1 No, RCBO, two-pole, 30 mA sensitivity, 25 Amp - 1 No and outgoing MCB DP, 6/10/16 Amp - 4 Nos. The MCBs/RCBOs shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing Distribution Board with incomer MCB DP, 16/32 Amp - 1 No, RCBO, two-pole, 25 Amp - 1 No and outgoing MCB SP, 6/10/16 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA 34 breaking capacity. The DB shall be equipped with incomer MCB DP 16/32 Amp - 1 No, RCBO, two-pole, 30 mA sensitivity, 25 Amp - 1 No and outgoing MCB SP, 6/10/16 Amp - 8 Nos. The MCBs/RCBOs shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing Distribution Board with incomer MCB TPN, 32 Amp - 1 No and outgoing MCB DP, 16/25/32 Amp - 6 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and 35 vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN 32 Amp - 1 No and outgoing MCB DP, 16 to 32 Amp - 6 Nos. The MCBs shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing Distribution Board, double-door with incomer MCB TPN, 32 Amp - 1 No, RCBO, four- pole, 40 Amp - 1 No and outgoing MCB DP, 10/16 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 36 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN 32 Amp - 1 No, RCBO, four-pole, 30 mA sensitivity, 40 Amp - 1 No and outgoing MCB DP, 10/16 Amp - 8 Nos. The MCBs/RCBOs shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing Distribution Board with incomer MCB TPN, 40 Amp - 1 No, RCBO, four-pole, 100 mA sensitivity, 40 Amp - 1 No and outgoing MCB DP, 10/16/20 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with 37 MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN 40 Amp - 1 No, RCBO, four- pole, 100 mA sensitivity, 40 Amp - 1 No and outgoing MCB DP, 10 to 20 - 8 Nos. The MCBs/ELCBs shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/ CGL make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing Distribution Board with incomer MCCB, four-pole, 100 Amp - 1 No and outgoing MCB DP, 20/25/32 Amp - 12 Nos - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor 38 type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, wall/floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system and shall consist of the following switchgears/ accessories - (a) Incomer - MCCB, four-pole, 100 Amp, with thermal-magnetic release range 80 - 100 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader terminals and rotary handle. The MCCB shall be of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/Schneider make --- 1 No (b) Outgoing - MCB DP, 10 KA breaking capacity, 20/32 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 12 Nos (c) Bus bar for main circuit and neutral shall have uniform cross section and made from electrolytic tinned copper as per relevant standards with colour coded, heat shrinkable, PVC insulated and having current density of 1.6 Amp/sq. mm cross sectional area --- 1 set (d) Multi LED type indication lamp for three-phases (Red, Yellow and Blue) with protection fuses of L&T/C&S/BCH make --- 1 Set (e) Cable glands of required sizes --- LOT (f) Two earth terminals of 12 mm diameter G.I. nut/bolt with washers shall be provided in the LT panel and all sheet steel section shall be electrically connected with a separate G.I. earth strip of 50 x 6 mm size across the panel at bottom. (g) Metallic Caution Board in three languages riveted to the panel board --- 2 Nos

Providing Distribution Board with incomer MCCB, four-pole, 100 Amp - 1 No and outgoing MCB DP, 20/25/32 Amp - 12 Nos complete with all accessories and multi-functional meter - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, wall/floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system and shall consist of the following switchgears/accessories - (a) Incomer - MCCB, four-pole, 100 Amp, with thermal-magnetic release range 80 - 100 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader 39 terminals and rotary handle. The MCCB shall be of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/Schneider make --- 1 No (b) Outgoing - MCB DP, 10 KA breaking capacity, 20 to 32 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/ HPL/Schneider make ---- 12 Nos (c) Digital multifunction meter having voltage, ampere, frequency, KW, PF, KVAR, KVA, KVAH, KWH, KVARH with CT --- 1 No (d) Bus bar for main circuit and neutral shall have uniform cross section and made from electrolytic tinned copper as per relevant standards with colour coded, heat shrinkable, PVC insulated and having current density of 1.6 Amp/sq. mm cross sectional area --- 1 set (e) Multi LED type indication lamp for three-phases (Red, Yellow and Blue) with protection fuses of L&T/C&S/BCH make --- 1 Set (f) Cable glands of required sizes --- LOT (g) Two earth terminals of 12 mm diameter G.I. nut/bolt with washers shall be provided in the LT panel and all sheet steel section shall be electrically connected with a separate G.I. earth strip of 50 x 6 mm size across the panel at bottom. (h) Metallic Caution Board in three languages riveted to the panel board --- 2 Nos

Providing Distribution Board with incomer MCCB, four-pole, 63 Amp - 1 No, RCBO, four-pole, 40 Amp - 1 No and outgoing MCB TPN, 32 Amp - 2 Nos and MCB DP, 16/32 Amp - 8 Nos - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, wall/floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system and shall consist of the following switchgears/accessories - (a) Incomer - MCCB, four-pole, 63 Amp, with thermal-magnetic release range 50 - 63 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader 40 terminals and rotary handle. The MCCB shall be of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/Schneider make --- 1 No RCBO, four-pole, 30 mA sensitivity, 40 Amp capacity of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/ C&S/HPL/Schneider make --- 1 No (b) Outgoing - MCB TPN, 10 KA breaking capacity, 32 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 2 Nos MCB DP, 10 KA breaking capacity, 16/32 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 8 Nos (c) Bus bar for main circuit and neutral shall have uniform cross section and made from electrolytic tinned copper as per relevant standards with colour coded, heat shrinkable, PVC insulated and having current density of 1.6 Amp/sq. mm cross sectional area --- 1 set (d) Multi LED type indication lamp for three-phases (Red, Yellow and Blue) with protection fuses of L&T/C&S/BCH make --- 1 Set (e) Cable glands of required sizes --- LOT (f) Two earth terminals of 12 mm diameter G.I. nut/bolt with washers shall be provided in the LT panel and all sheet steel section shall be electrically connected with a separate G.I. earth strip of 50 x 6 mm size across the panel at bottom. (g) Metallic Caution Board in three languages riveted to the panel board --- 2 Nos

Providing Distribution Board with incomer MCCB, four-pole, 100 Amp - 1 No and outgoing MCB TPN, 32 Amp - 2 Nos and MCB DP, 16/20 Amp - 12 Nos - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, wall/floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system and shall consist of the following switchgears/accessories - (a) Incomer - MCCB, four-pole, 100 Amp, with thermal-magnetic release range 80 - 100 Amp, Ics = 100% Icu having 41 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader terminals and rotary handle. The MCCB shall be of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/Schneider make --- 1 No (b) Outgoing - MCB TPN, 10 KA breaking capacity, 32 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 2 Nos MCB DP, 10 KA breaking capacity, 16/20 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 12 Nos (c) Bus bar for main circuit and neutral shall have uniform cross section and made from electrolytic tinned copper as per relevant standards with colour coded, heat shrinkable, PVC insulated and having current density of 1.6 Amp/sq. mm cross sectional area --- 1 set (d) Multi LED type indication lamp for three-phases (Red, Yellow and Blue) with protection fuses of L&T/C&S/BCH make --- 1 Set (e) Cable glands of required sizes --- LOT (f) Two earth terminals of 12 mm diameter G.I. nut/bolt with washers shall be provided in the LT panel and all sheet steel section shall be electrically connected with a separate G.I. earth strip of 50 x 6 mm size across the panel at bottom. (g) Metallic Caution Board in three languages riveted to the panel board --- 2 Nos

Providing Distribution Board, double-door, outdoor type with incomer MCCB, four-pole, 100 Amp - 2 Nos and outgoing MCB TPN, 63 Amp - 2 Nos, MCB TPN, 32 Amp - 1 No and MCB DP, 16/32 Amp - 8 Nos - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, wall/floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system and shall consist of the following switchgears/accessories - (a) Incomer - MCCB, four-pole, 100 Amp, with thermal-magnetic release range 80 - 100 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be 42 supplied with spreader terminals and rotary handle. The MCCB shall be of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/Schneider make --- 2 Nos (b) Outgoing - MCB TPN, 10 KA breaking capacity, 63 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 2 Nos MCB TPN, 10 KA breaking capacity, 32 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 1 No MCB DP, 10 KA breaking capacity, 16/32 Amp of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider make ---- 8 Nos (c) Bus bar for main circuit and neutral shall have uniform cross section and made from electrolytic tinned copper as per relevant standards with colour coded, heat shrinkable, PVC insulated and having current density of 1.6 Amp/sq. mm cross sectional area --- 1 set (d) Multi LED type indication lamp for three- phases (Red, Yellow and Blue) with protection fuses of L&T/C&S/BCH make --- 1 Set (e) Cable glands of required sizes --- LOT (f) Two earth terminals of 12 mm diameter G.I. nut/bolt with washers shall be provided in the LT panel and all sheet steel section shall be electrically connected with a separate G.I. earth strip of 50 x 6 mm size across the panel at bottom. (g) Metallic Caution Board in three languages riveted to the panel board --- 2 Nos

Providing Distribution Board with incomer MCCB, four-pole, 125 Amp - 1 No and outgoing RCBO TPN, 63 Amp - 4 Nos, RCBO DP, 25/40 Amp - 4 Nos - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, wall/floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four- wire, 440 Volt AC, 50 Hz supply system and shall consist of the following switchgears/accessories - (a) Incomer - MCCB, four-pole, 125 Amp, with thermal-magnetic release range 100 - 125 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader terminals and rotary handle. The MCCB 43 shall be of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/C&S/HPL/Schneider make --- 1 No (b) Outgoing - RCBO, four-pole, 30 mA sensitivity, 63 Amp capacity of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/ C&S/HPL/Schneider make --- 4 Nos RCBO, two-pole, 30 mA sensitivity, 25/40 Amp capacity of ABB/L&T (Hagar)/GE/MDS/Siemens/BCH/ C&S/HPL/Schneider make --- 4 Nos (c) Bus bar for main circuit and neutral shall have uniform cross section and made from electrolytic tinned copper as per relevant standards with colour coded, heat shrinkable, PVC insulated and having current density of 1.6 Amp/sq. mm cross sectional area --- 1 set (d) Multi LED type indication lamp for three-phases (Red, Yellow and Blue) with protection fuses of L&T/C&S/BCH make --- 1 Set (e) Cable glands of required sizes --- LOT (f) Two earth terminals of 12 mm diameter G.I. nut/bolt with washers shall be provided in the LT panel and all sheet steel section shall be electrically connected with a separate G.I. earth strip of 50 x 6 mm size across the panel at bottom. (g) Metallic Caution Board in three languages riveted to the panel board --- 2 Nos

Digging of cable trench 450/600 mm wide and 900 mm deep in all types of soil including hard, rocky etc - The price shall cover for digging of 450/600 mm wide and 900 mm deep trench in all types of soil including soft, rocky as per cable route plan and filling back the trench after laying of cables. This also includes clearing of roots of trees and bushes and other temporary obstructions on the selected route.

Supply and laying of RCC half round pipe, 100 mm diameter - The price shall cover for supply of half round RCC pipes of 100 mm inner diameter and 1.0 meter in length as per given description in Annexure-XX 45 of tender document. The internal surface shall have a smooth finish without any bulge or projections to avoid damage to the cable. The price shall also cover for laying of half round RCC pipes above the cables for mechanical protection on laid cables in the existing trench. After laying of RCC half round pipe, the trench shall be filled up with soil available thereby.

Supply and laying of RCC half round pipe, 150 mm diameter - The price shall cover for supply of half round RCC pipes of 150 mm inner diameter and 1.0 meter in length as per given description in Annexure-XX 46 of tender document. The internal surface shall have a smooth finish without any bulge or projections to avoid damage to the cable. The price shall also cover for laying of half round RCC pipes above the cables for mechanical protection on laid cables in the existing trench. After laying of RCC half round pipe, the trench shall be filled up with soil available thereby.

Providing uPVC pipe, 50 mm diameter - The price shall cover for supply of uPVC pipe of 50 mm nominal bore diameter and working pressure of 14 kg/sq. cm along with coupling, elbow, tee etc for protection of cable. The upright cable shall be encased in uPVC pipes for mechanical protection. The pipe shall be clamped 47 with flat MS clamp at each location on upright cable length. uPVC Pipe shall be as per ASTM-D: 1785, Sch-80 of PARIXIT/SWASTIK/ASHIRWAD/ASTRAL/DOLPHIN/POLYTECH/DUKE/FALCON make. The price shall also cover for laying the uPVC pipes in ground/road and under the track by digging open trench method. Each length of the pipes shall be joined together using proper size of uPVC coupler and properly aligned in a straight line, keeping an inclination to facilitate the draining of water.

Supply and laying of DWC pipe, 63 mm diameter - The price shall cover for supply of Double Wall Corrugated (DWC) HDPE pipe of 63 mm diameter. DWC HDPE pipe shall have corrugation on outer wall but inner wall shall be plain conforming to IS: 14930 Part I and II amended from time to time. The pipes shall be "ISI" marked. Accessories like HDPE snap fit coupler with neoprene 'O' ring shall be part of supply to make the joints 48 water/damp proof. The strength and stiffness class of the pipe shall be SN4 and SN8 respectively. The price shall also cover for laying the DWC pipes in the ground below the tracks/road by push through method at a depth below the formation level as indicated in the drawing supplied by railway. The term "formation" level means the earth surface just below the bedding of the ballast. In case of any hard/stony soil, contractor should adopt new technology method in push through method. Each length of the pipes shall be joined together properly using proper size of socket and aligned in a straight line, keeping an inclination to facilitate the draining of water.

Supply and laying of HDPE pipe, 50 mm diameter by pushing method under track/road - The price shall cover for supply of HDPE (High Density Polyethylene) pipe of 50 mm nominal diameter as per IS 4984-1995 of make Tijaria/Himalyan/Koncept/ Poddar/Unique with accessories required for laying such as coupler, bend etc 49 as per the description given in Annexure-XX of tender document. The price shall also cover for laying the HDPE pipes in the ground below the tracks/road by push through method at a depth below the formation level as indicated in the drawing supplied by railway. The term "formation" level means the earth surface just below the bedding of the ballast. In case of any hard/stony soil, contractor should adopt new technology method in push through method. Each length of the pipes shall be joined together properly using proper size of socket and aligned in a straight line, keeping an inclination to facilitate the draining of water.

Supply and laying of HDPE pipe, 110 mm diameter by pushing method under track/road - The price shall cover for supply of HDPE (High Density Polyethylene) pipe of 110 mm nominal diameter as per IS 4984-1995 of make Tijaria/Himalyan/Koncept/ Poddar/Unique with accessories required for laying such as 50 coupler, bend etc as per the description given in Annexure-XX of tender document. The price shall also cover for laying the HDPE pipes in the ground below the tracks/road by push through method at a depth below the formation level as indicated in the drawing supplied by railway. The term "formation" level means the earth surface just below the bedding of the ballast. In case of any hard/stony soil, contractor should adopt new technology method in push through method. Each length of the pipes shall be joined together properly using proper size of socket and aligned in a straight line, keeping an inclination to facilitate the draining of water.

Laying of cable in trench - The price shall cover for laying, testing and commissioning of LTUG armoured cable in existing trench/pipe and its connection at both ends. The cable shall be tested with 500 Volt Megger earth tester before laying it in the trench. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to this office as well as site in-charge after laying of cable. Cables shall be supplied by railways at site engineer's stores.

Laying of cable on wall/cover shed/existing tray with MS clamp - The price shall cover for laying, testing and commissioning of LTUG armoured cable on wall/cover shed/in existing tray and its connection at both 52 ends. The cable shall be tested with 500 Volt Megger before laying it in the tray. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to site engineer and Divisional Office after laying of cable.

Providing 'B' Class G.I. Pipe of 50 mm diameter - The price shall cover for supply and fixing of G.I. 53 pipe, 'B' class, medium grade, ISI marked, 50 mm diameter as per IS: 1239/1990 or latest for protection of cables at wall/cover shed/FOB and poles and its fixing by clamps made from 40 x 6 mm M.S. flat duly painted along with required GI nuts-bolts and washers fixed at a distance of 1.5 meter. The GI pipe shall be of Tata/Zenith/Jindal/Surya/Swastik make.

Supply, fixing, testing and commissioning of 5.0 meter height G.I. street light octagonal pole, single 54 arm complete with all accessories and foundation - The price shall cover for supply, erection and commissioning of 5.0 meter height single arm, G.I. street light octagonal pole as per the detailed specifications given in Annexure-XX of tender document.

Supply, fixing, testing and commissioning of 5.0 meter height G.I. street light octagonal pole, 55 double arm complete with all accessories and foundation - The price shall cover for supply, erection and commissioning of 5.0 meter height double arm, G.I. street light octagonal pole as per the detailed specifications given in Annexure-XX of tender document.

Supply, fixing, testing and commissioning of 6.0 meter height conical pole with decorative single arm bracket - The price shall cover for supply, erection and commissioning of 6.0 meter height G.I. street light conical pole as per the detailed specifications given in Annexure-XX of tender document.

Providing additional single arm bracket on existing pole of 6.0 meter height for street light - The 57 price shall cover for supply, erection and commissioning of additional single arm bracket on existing pole of 6.0 meter height. The brackets shall be decorative type made of specified size NB G.I heavy duty pipe with minimum 1000 mm long, bent at an angle of 120° with necessary holding brackets, hold fasts etc. Design of bracket arm shall be got approved from Sr. DEE (Power) Vadodara before supply of poles.

Supply and providing three-core flexible copper wire, 24/0.2 mm conforming to IS: 694, 1100 Volt 58 grade for connection to LED fittings - The price shall cover for supply and connection of three-core, flexible copper wire of size 24/0.20 mm, ISI marked, PVC insulated, conforming to IS: 694, 1100 Volt grade from the existing overhead line/catenary/junction box to LED street light fitting as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit.

Providing Junction box - The price shall cover for supply, fixing, testing and commissioning of pole 59 mounted junction of SMC model No. GS-JB 3020 (1) of SINTEX or similar make for connecting the incoming and outgoing cables and connecting wire of street lights. Junction box shall be complete with suitable connectors and fuse unit for streetlight. Complete unit shall be mounted on the pole/wall/pillar by means of suitable hardware, terminal strips, cable glands, clamps etc.

Fixing, testing and commissioning of LED fittings - The price shall cover for fixing, testing and 60 commissioning of LED light fitting. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing light point as per site conditions. The connection cord shall be protected by suitable size of flexible PVC conduit. LED fittings shall be supplied by railways at site engineer's stores.

Fixing, testing and commissioning of street light fitting on pole/truss/roof/wall by fabrication and supply of 'B' class G.I. pipe of required length, diameter and shape and fixed with M.S. clamps and connection to fitting through 24/0.20 mm copper wire - The price shall cover for fixing, testing and commissioning of LED street 61 light fitting on existing pole/wall by supply of 'B' class G.I. pipe of suitable size and length duly fixed with M.S. fabricated clamps made from 40 x 6 mm M.S. flat with G.I. nuts-bolts as per site condition. The supply connection shall be done through FRPVC insulated; three-core flexible copper wire of 24/0.2 mm, 1100 Volt grade, ISI marked conforming to IS: 694/1990 or latest from the existing overhead catenaries/pole mounted junction box or as per site condition in medium grade PVC conduit. Supply of PVC wire, PVC conduit, bakelite connector etc. is inclusive in the scope of work. The LED street light fittings shall be issued by railways from site engineer's office/stores.

Providing illuminated glow signage board made from panaflex and vinyl sheet material with backlit LED module lighting - The price shall cover for fabrication, supply, fixing, testing and commissioning of LED backlit signage board as per detail specification as under - The LED Glow Signage Board of required size with suitable depth shall be visible from both sides. The board shall be well supported and the structure should be prepared to bear wind pressure and also self weight. Before manufacturing, the structural design should be got approved from site engineer. The board shall be fabricated from 18 SWG G.I. sheet. The vinyl sheet of size 0.5 mm thickness fully stretched shall be fixed between M.S. square section and from the top it should be supported by S.S. angle of size 25 x 25 mm fixed by machine screw. The vinyl sheet material shall be LG/3M/Panaflex make as approved by site engineer. The vinyl sheet should be illuminated from inside by LED strip/module of clear cool white color, 6500° CCT, 5.00 mm diameter LEDs of uniform intensity and luminosity for excellent and uniform visibility. The intensity of the illumination shall be such that it shall be possible to read the information clearly from a distance of 62 25 meters approximately. LED modules shall be Philips/Wipro/Bajaj/Osram/Samsung/CREE make with electronic starter/driver. The board shall be provided with a heavy duty connector strip of bakelite material of 16 Amp capacity fitted on the board. All power supply units shall be of Switch Mode Power Supply type (SMPS) suitable for operation from AC sources ranging from 80 to 270 Volt, 50 Hz AC, single phase. All power units shall be tested at 50% load of maximum working capacity. The LED system wattage should be 6 Watt (max) per square feet and lux level shall be 1700 (±10%) Lux at 2 feet distance inside the surface. Provision shall also be made for 01 No. earth terminal and suitable numbers of louvers on both sides shall be provided for proper heat dissipation. A wire mesh shall also be provided to prevent entry of lizards and other insects. The matter, size of letter and language of signage board to be digitally printed on the vinyl sheet shall be given by the concerned site engineer. The board shall be fixed/hanged using a suitable size of clamp made from GI flat not less than 25 x 4 mm in the platform cover shed/offices/service buildings as per site requirement and connection shall be given through a three core PVC insulated copper flexible cable of size 24/0.20 mm protected by 19 mm diameter heavy duty PVC flexible conduit.

Providing PVC insulated and sheathed, single core, multi-stranded, Aluminium conductor cable, 63 10.0 sq. mm for earth continuity - The price shall cover for supply of single core, PVC insulated, stranded, Aluminium conductor of 10 sq. mm cross sectional area conforming to IS 1554 - Part-1. The cable shall be flame retardant, should not support combustion and shall be self extinguishing and shall be of Johnson/Neo- cab/Nicco/Finolex/R.R. Kabel/Asian/Ecotek/L&T/Havell's/Polycab/Avocab make.

Providing G. I. pipe earthing - The price shall cover for digging of suitable size earth pit and supply of material and erecting pipe earthing and its refilling as per Railways' drawing no. EL/111/1/116. The earthing shall generally be governed by IS-3043/1987 or latest. G.I. pipe for the earthing electrode shall be 50 mm nominal bore diameter of 'B' class (medium grade) as per IS 1239/1990 or latest of make Tata/Zenith/Jindal/Surya/Swastik with ISI marked and 3.0 m in length. Proper connecting arrangement with G.I. clamp, G.I. nuts and bolts of 12 mm size shall be provided at the top end of the earthing electrode. 6 SWG G.I. wire with PVC sleeve shall be connected between each point to be earthed and individual earthing station. The scope of work also covers 64 making a groove of suitable depth and width by cutting the existing concrete/tar road/platform surface and it's refilling/plastering as per site requirement after laying of G.I. earth wire. The G.I. earthing wire ends shall be clamped between two G.I washers of sufficient size and properly tightened with G.I. nuts and bolts of 10 mm dia. The earthing electrode pipe shall not project more than 250 mm above ground level. The end sealing G.I cap/funnel shall be provided at the top of the pipe earthing electrode. The circular earthing chamber and top cover should be pre-casted RCC as per drawing and shall be provided at the earthing electrode. Supply of earth electrode, GI wire/strip, clamps, nut-bolts, J-bolts, washers, wire mesh, sleeve, charcoal and salt as per drawing is within the scope of this item. The earth resistance shall be measured and recorded in the presence of railways' representative. This should not be more than 5 . The earth no., date of measurement and earth resistance value shall be painted on the earthing box or a permanent structure in the vicinity of the earth electrode.

Providing G.I. Earth wire 8 SWG in PVC sleeve along with cable - The price shall cover for supply and laying of soft G.I. wire of 8 SWG covered with black coloured PVC sleeve of superior quality and laid along with PVC LTUG cable properly fixed and connecting earthing terminals of each panel.

Providing LED lamp, 7 Watt - The price shall cover for supply of 7 Watt LED bulb as per Western 1 Railways' specification no. WR/CCG/Specification/P/001 (Rev. 01) - 2018. The bulb shall be equipped with B22 cap and shall be of A67 type. The bulb shall deliver 700 lumens output with CCT of 6500° K and CRI of 80. The bulb shall be of reputed quality and make.

Providing LED lamp, 9 Watt - The price shall cover for supply of 9 Watt LED bulb as per Western 2 Railways' specification no. WR/CCG/Specification/P/001 (Rev. 01) - 2018. The bulb shall be equipped with B22 cap and shall be of A67 type. The bulb shall deliver 900 lumens output with CCT of 6500° K and CRI of 80. The bulb shall be of reputed quality and make.

Providing four-feet long, 18/20 Watt LED fitting complete with all accessory and LED tube - The price shall cover for supply of four-feet long, 18/20 Watt LED batten fitting. The fixture shall be of CRCA channel finished with white polyester powder coating with high UV and corrosion resistance. The fixture shall be equipped with end caps, push fit type lamp holders and mains connector to directly fix 4 feet long LED tube. The LED lamp 3 shall be of 18/20 Watt as per Western Railways' specification no. WR/CCG/Specification/P/001 (Rev. 01) - 2018. The tube shall be of polycarbonate material. The entire fixture shall be of reputed quality and make. The price shall also cover for fixing testing and commissioning of the complete fitting at site by means of bracket made from GI flat of 25 x 3 mm with nuts, bolts and washers or on heavy duty, ISI marked PVC square box as per site requirement. Connection shall be given by means of 24/0.2 mm three-core flexible copper wire through connector and heavy duty flexible PVC conduit. Removal of existing fittings along with brackets and handing over the same to the site in-charge is included in the scope of work.

Supply and fixing of LED based reading light complete with lamp, 3/5 Watt - The price shall cover 4 for supply, fixing, testing and commissioning of LED reading light fitting operating on 230 Volt, 50 Hz AC supply. The fitting shall be of reputed quality complete with 1 x 3/5 Watt LED, driver and shall have a 360° swivel movement. The fitting shall be surface mounted and equipped with flexible metallic conduit.

Supply, fixing, testing and commissioning of LED Bulkhead fitting, 10 Watt complete with all accessories - The price shall cover for supply of LED Bulkhead fitting, 10 Watt. The fixture shall be suitable for outdoors (IP-65 rating) and shall be durable and sturdy, designed to withstand dust and water. The fixture shall be equipped with polycarbonate diffuser with silicon gasket, designed for more heat resistance. The fixture shall 5 confirm to Western Railways' specification no. WR/CCG/Specification/P/001 (Rev. 01) - 2018. The fixture shall be of reputed quality and make. The price shall also cover for fixing testing and commissioning of the complete fitting at site by means of bracket made from GI flat of 25 x 3 mm with nuts, bolts and washers or on heavy duty, ISI marked PVC square box as per site requirement. Connection shall be given by means of 24/0.2 mm three-core flexible copper wire through connector and heavy duty flexible PVC conduit. Removal of existing fittings along with brackets and handing over the same to the site in-charge is included in the scope of work.

Providing LED night light fitting for ceiling, 5/6 Watt - The price shall cover for supply, fixing, testing and commissioning of ceiling/wall mounted 5/6 Watt, LED night light fitting as per Western Railways' specification no. WR/CCG/Specification/P/ 001 (Rev-01)-2018. The fitting shall be of reputed quality and make.

Providing LED mirror light fitting, 12 Watt - The price shall cover for supply, fixing, testing and 7 commissioning of aesthetic type surface/ceiling mounted luminaire for 12 Watt LED mirror light. The fixture shall confirm to Western Railways' specification no. WR/CCG/Specification/P/001 (Rev. 01) - 2018. The fixture shall be of reputed quality and make. The fitting shall be got approved by the site engineer before supply and commissioning.

Providing LED street light luminary, 25 Watt ±10% complete with all accessories - The price shall cover for supply of 25 Watt LED Street Light fitting made from pressure die-cast LM6/ADC12/LM24 housing with optimal heat sink for better thermal dissipation and toughened glass or UV stabilized polycarbonate cover with high transmission index for superior light output. The fitting shall be as per Western Railways' specification no. WR/CCG/Specification/P/001 (Rev-01)-2018 of reputed quality and make. The fitting shall be designed for IP: 65 class protection for pole/bracket mounting. The fitting shall be provided with special moisture proof vent. The fitting shall be of reputed quality and make. The price shall also cover for fixing, testing and commissioning of the above street light fitting on pole/truss/roof/wall by fabrication and supply of 'B' class G.I. pipe of required length, diameter and shape and fixed with M.S. clamps made from M.S. flat of 40 x 5 mm size duly painted with nut, bolts and washers of 12 mm diameter. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing overhead line/catenary/junction box as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit. Removal of existing fittings along with pipe and clamps and handing over the same to the site in-charge is included in the scope of work.

Providing LED street light luminary, 45 Watt ±10% complete with all accessories - The price shall cover for supply of 45 Watt (±10%) LED Street Light fitting made from pressure die-cast LM6/ADC12/LM24 housing with optimal heat sink for better thermal dissipation and toughened glass or UV stabilized polycarbonate cover with high transmission index for superior light output. The fitting shall be as per Western Railways' specification no. WR/CCG/Specification/P/001 (Rev-01)-2018 and shall be of reputed quality and make. The fitting shall be designed for IP: 65 class protection for pole/bracket mounting. The fitting shall be provided with 9 special moisture proof vent. The fitting shall be of reputed quality and make. The price shall also cover for fixing, testing and commissioning of the above street light fitting on pole/truss/roof/wall by fabrication and supply of 'B' class G.I. pipe of required length, diameter and shape and fixed with M.S. clamps made from M.S. flat of 40 x 5 mm size duly painted with nut, bolts and washers of 12 mm diameter. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing overhead line/catenary/junction box as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit. Removal of existing fittings along with pipe and clamps and handing over the same to the site in-charge is included in the scope of work.

Supply of LED street light luminary, 70 Watt ± 10% complete with all accessories - The price shall cover for supply of energy efficient LED Area light/flood light luminary 60 to 70 Watt capacity with luminous 10 efficacy of 100. The luminary shall be made from pressure die cast aluminium housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP: 65 protection suitable for working on 240 Volt, 50 Hz AC supply as per Western Railways' Specification No. WR/CCG/Specification/ P/001 (Rev. 01) - 2018 or latest. The fitting shall be of reputed quality and make.

Supply, fixing, testing and commissioning of 70 Watt LED street light fitting complete with all accessories - The price shall cover for supply of energy efficient LED Area light/flood light luminary 60 to 70 Watt capacity with luminous efficacy of 100. The luminary shall be made from pressure die cast aluminium housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP: 65 protection suitable for working on 240 Volt, 50 Hz AC supply as per Western Railways' Specification 11 No. WR/CCG/Specification/ P/001 (Rev. 01) - 2018 or latest. The fitting shall be of reputed quality and make. The price shall also cover for fixing, testing and commissioning of LED street light fitting on existing pole/wall by supply of 'B' class G.I. pipe of suitable size and length duly fixed with M.S. fabricated clamps made from 40 x 6 mm M.S. flat with G.I. nuts-bolts as per site condition. The supply connection shall be done through FRPVC insulated; three-core flexible copper wire of 24/0.2 mm, 1100 Volt grade, ISI marked conforming to IS: 694/1990 or latest from the existing overhead catenaries/pole mounted junction box or as per site condition in medium grade PVC conduit. Supply of PVC wire, PVC conduit, bakelite connector etc. is inclusive in the scope of work. Removal of existing fittings and handing over the same to the site in-charge is included in the scope of work.

Supply of LED flood light luminary, 90 Watt - The price shall cover for supply of energy efficient LED flood light luminary 90 Watt capacity having pressure die cast aluminium housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP 65 protection class for provision on high masts. The fitting shall operate on 240 Volt, 50 Hz AC supply and shall be as per 12 Western Railways' specification no. WR/CCG/Specification /P/001 (Rev-01)-2018. The price shall also cover for fixing, testing and commissioning of the above flood light luminary on high mast by suitable and secure fixing arrangement. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing junction box. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit. Removal of existing fittings and handing over the same to the site in-charge is included in the scope of work.

Providing LED flood light fitting 150 Watt - The price shall cover for supply of energy efficient LED flood light luminary 150 Watt capacity having pressure die cast aluminium housing, toughened front glass cover, 13 fitted with secondary optics, heat sink and integrated electronic driver for long life with IP 65 protection class for provision on high masts. The fitting shall operate on 240 Volt, 50 Hz AC supply and shall be as per Western Railways' specification no. WR/CCG/Specification /P/001 (Rev-01)-2018. The price shall also cover for fixing, testing and commissioning of the above flood light luminary on high mast by suitable and secure fixing arrangement. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing junction box. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit. Removal of existing fittings and handing over the same to the site in-charge is included in the scope of work.