Western Railway Tender
... More
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Costs
EMD
₹ 5,13,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DYCSTECRJT2024-2510-DY.CSTE-C-RJT-S AND T/WESTERN RLYTender No
DYCSTECRJT2024-2510Tender Authority
Western Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Failure Analysis System or Central Monitoring Unit with Printer. As per technical 5 specification IRS: S-992006 (Amdt-3) or latest. The specification of Failure Analysis System should be got approved from the Engineer in charge before supply. The Specification of Failure Analysis System shall be as per technical specification given in contract Agreement or higher version as approved by Engineer In-Charge. (Technical specification provided in tender documents in chapter 5.)
1
260015
260015
... More
Failure Analysis & Fault Diagnostic software for data logger of 1024 digital inputs /4096 digital inputs
1
48244
48244
... More
750 VA Off line UPS with battery backup 3 Hours for Failure Analysis System of reputed make as per Engineer in-charge. As per technical specification chapter 5.
1
25117
25117
... More
Provision of T-Networking/Dual card E1 to Serial Port (RS-232) convertor suitable to insert in the data logger / FEP euro rack for Networking to the Data Logger equipments. This includes supply of all equipment/ accessories required for the purpose.
1
31203
31203
... More
Pyrotech Workspace make New Modular Control Desk size 4102x2576 mm for provision of 02 Nos. Monitors made in "XLAT" system. 1. Table Top: The material of the working surface shall be made of thermally treated Aluminum -Trihydrate and acrylic resin material supported on minimum 25 9 mm thick MDF base. 2. Structure: Powder Coated Aluminum Sturdy Structure and extreme side Aesthetic Legs. The structure shall be rigid enough to withstand BIFMA X5.5: 2014 (Latest Edition). 3. Monitor Arm:- UL certified monitor arm assembly shall have auto lock, push & remove feature for quick release of VESA mounts and modular arm extensions for ease in maintenance and fixing of monitor by one technician within 30 seconds without using any tools. 4. Shutters & Side Legs: - Front and back shutters shall be of18 mm Laminated MDF Board with premium finish Side leg.
1
966052
966052.64
... More
Relay racks assembly complete with scaffolding bus bars, fuse strips, fuses, resistors, 1 capacitors, insulators, grouting bolts, tripods etc. as per Drg. No. CSTE /6028 .[Scaffolding should include 20% extra (with minimum of 2 relay rack positions) as spare for future expansion]. Relay rack shall be Powder Coated. (Quantity of Resistance, capacitor & Other items as Annexure.)
7
27067
189469
... More
Cable termination racks as per Drg. no. CSTE 5004, 5005, 5006 complete along with 2 fitting arrangements and also with arrangement for fixing four 8-way terminal strips/ Screw less terminals on each row having 16 such rows. Supply of 8 way terminal strips/ Screw less terminals not covered under this item. Cable termination rack shall be Powder Coated.
6
25044
150264
... More
PVC insulated Railway Signalling multi-core Indoor Cable 60core x 0.6mm Dia conforming to IRS:76/89 (Amd3) or latest
1.5
152409
228613.5
... More
PVC insulated Railway Signaling multi-core Indoor Cable 1 mm x 40 mm x 0.6mm Dia conforming toIRS:76/89(Amd3) or latest.
1.5
100669
151003.5
... More
PVC insulated Railway Signaling multi-core Indoor Cable 1mm x 24 mm x 1 mm Dia conforming to IRS:76/89(Amd3) or latest.
3
167295
501885
... More
Single core multi-strand wire 0.5 sq.mm. (16 conductor each dia. 0.2mm), as per IRS 76/89 (Amd3) or latest.
3
5569
16707
... More
Flexible cable (Power wire), multi-strand copper conductors cross section 1x6 Sq.mm.( 85 conductor each diameter 0.30 +/- 0.01) as per IS 694/1990 with insulation thickness of 0.80 mm nominal conductor resistance 3.30 ohms/km and test parameters are as per IRS(S)76/89 or latest.
1
40222
40222
... More
Flexible cable (Power wire), multi-strand copper conductors cross section 8 (1x16Sq.mm).101 Conductors each diameter 0.45 +/- 0.01 as per IS 694/2010 with insulation thickness of 1.2mm nominal conductor resistance 1.127 Ohms/Km and test parameters as per IRS(S) 76/89 or latest.
1
118721
118721
... More
Disconnect Terminal Block, Screw less type, as per RDSO Spec. No. RDSO/SPN/189/2004. With the latest amendments.+
-
-
417930
... More
Earth Leakage Detector as per RDSO/SPN/256/2002 or latest with latest amendments. 10 The basic detector unit shall comprise of 12 channels, for use on signaling circuits of 110V AC/DC and/or 60V/24V/12V DC as ordered by purchaser. If the detector is required for less number of channels, dummy plates shall be provided. For additional requirement add on /expendable cabinet may be used. The voltage specified shall be provided with + 25% and - 10% tolerance.
2
155843
311686
... More
Fuse auto changeover system for use in Railway Signaling System as per 11 RDSO/SPN/209/2012 rev.1 with latest amendments. One Automatic changeover Unit comprises 32 nos. of external Non-Deteriorating Type or 'G' type fuses from 0.6 Amp to 4 Amp capacities which are in signaling circuits. The system shall have 8 cards with a monitoring arrangement of 4 fuses in one card.
15
447675
447675
... More
Fuse auto changeover system for use in Railway Signaling System as per 12 RDSO/SPN/209/2012 rev.1 with latest amendments. One Automatic changeover Unit comprises 24 nos. of external Non-Deteriorating Type or 'G' type fuses from 4 Amp to 10 Amp capacities which are in signaling circuits. The system shall have 6 cards with a monitoring arrangement of 4 fuses in one card
2
101792
101792
... More
Cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4 & Spec No IRS S 13 75/2006 with the latest amendment. The fuse block shall be suitable for round-head type voltage fuses. This also includes the supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.
450
143
64350
... More
ARA Terminal blocks with links made of PBT Spec No.s/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.
9000
89
801000
... More
Colour Light Signal Complete. This includes: - (1). Post Tubular 140 mm Dia, as per IRS: S-6/81 or Latest & RDSO Drg. No. SA-24625 (Advance). (2). CI Base (As per IRS S-10 & RDSO Drg. No. 15 2011/M with latest assembly). (3). Pinnacle. (4). Ladder Assembly, as per RDSO Drg. No. SA-23156, with Base, Ladder Guards, Platform, Front Maintenance Platform, MS Supporting bracket to Support Ladder. (5). Signal Front Staging Complete Assembly for CLS Unit. (6). Signal back staging as per extent WR Practice Note: Height of the Post shall be 4.6 m Long.
20
10863
217260
... More
Non Metallic (FRP) color light signal housing multi-unit type for railway signaling 16 suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Vol. 1.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest.
12
26540
318480
... More
Non Metallic (FRP) color light signal housing multi-unit type for railway signaling 17 suitable for RE area THREE Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Vol.1.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest.
12
30287
363444
... More
Junction route indicator unit 1way as per Drg. No. RDSO SA 23401 suitable for LED Signal Lighting Unit & as IRS: S-66/84 amndt-1or latest. (Supply of LED Unit is not covered in this item).
4
19449
77796
... More
Junction route indicator unit 2 way as per Drg. No. RDSO SA 23402 is suitable for LED Signal Lighting Units & as IRS: S-66/84 amndt-1 or latest.
2
19535
39070
... More
Junction route indicator unit 3 ways as per Drg. No. RDSO SA 23403 is suitable for LED Signal Lighting Units & as IRS: S-66/84 amndt-1 or latest. (Supply of LED Units is not covered in this item).
2
23181
46362
... More
Position Light Shunt Signal Unit Complete with Post (made of GI Pipe of 80 mm 21 Diameter Medium Class IS Spec. No. IS: 1239 Pt. 1/1990) Base, Hood, and Cover, etc. as per Drg. No. SA-23840, Signal Number Plate, suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item).
5
4541
22705
... More
Position Light Shunt Signal Unit Complete, with offset bracket, hood, Cover etc. as per Drg. No. SA-23840 suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item).
7
3273
22911
... More
Calling ON Signal Unit with Brackets & Fixing accessories. Calling On Signal Unit shall conform to RDSO Drg no 24351(Adv.) Alt1 suitable to LED Signal Lighting Unit.
3
2670
8010
... More
Offset brackets for Main Signal, made of tubular steel, outer diameter 140 mm, thickness of pipe 4.5 mm. horizontal length of pipe 545 mm & vertical length of pipe 324 mm with fixing arrangement on Main Signal post as per Drawing No SW/554/G/R
7
4422
30954
... More
Miniature, Plug in Type, M to C,DC Neutral ,Track relay, ACI, Style QTA2, 9 Ohm, 2F-1B contact, Code - FGHKX Spec : BRS :939-A & 966 (Appx-F2) & IRS : S-23, S-23,S-34 & 60.
28
4770
133560
... More
Miniature, Plug in type, M to C, AC immunized, DC biased Track Relay, 2F-2B contacts, style QBAT-9 ohms. Code ABEJX Spec:- RDSO/SPN/84 Ver. 2 : IRS -S@ 45"44@IRS-S-23, IRS-S@ 45<45@ 78.
2
6318
12636
... More
Track feed battery chargers, 110V AC input, 2 to 6/10 V DC Output; as per Specn. No. IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.
28
3985
111580
... More
Adjustable Track Feed Resistance disc type 30 ohms as per RDSO Drg. No. SA 20166/M (Adv.) with latest amendments (with Phenolic molded base).
28
1392
38976
... More
Track Lead Junction Boxes as per C.Rly Drg. No.RST 11509 made from fiber glass/SMC/FRP along with terminal blocks.
132
1699
224268
... More
Low maintenance Lead acid secondary cell 2V/80 AH (Track feed Battery), shelf mounting type conforming to IRS:S- 88/2004 or latest (uncharged). 31
84
2255
189420
... More
GI wire 8 SWG (4mm Dia) suitable for track circuit rail bonding.
10
67
670
... More
Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm Dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M.
500
6
3000
... More
Choke Coil for Single Rail Track Circuit on 25 KV 50 Hz AC Electrified Section as per Spec No IRS S 65/1983 with latest amendments.
56
3813
213528
... More
Hydrometer, Exide make or similar for measuring the specific gravity of Battery Graded acid with mounting stand in location Boxes.
-
-
34
... More
Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non-flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. . One of the 35 following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified. Color -Bright Orange; Min Weight = 4kg. Test Check by Consignee & Sample check by JAG officer.
300
1889
566700
... More
Medium Class G.I. Pipes to IS: 1239 (Pt.)-2004 or latest; 100mm dia. (int. Dia) 3.65 mm thick or above with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes.
600
759
455400
... More
Desk type Electronic Magneto Telephone as per spec No IRS/TC-79/2000 or with latest amendments.
2
6191
12382
... More
Maintenance Free Earth Electrode of length 3m, including supply of 3 bags of Earth enhancement material for earthling (10KGs /bag) for each electrode & other accessories as per Drg. No. SDO / RDSO/ E&B/001 and RDSO Spec No. RDSO / SPN/197/2008. 39
40
15225
609000
... More
Earth Electrode as per Drg. No. CSTE / 6091.
100
3452
345200
... More
SS Location box made of Spl Grade SS 304 of size as per Drg. No. DRM/SG/948 dt. 26.04.2011 (Single app. Case) or latest. Manufacturer's certificate in regard to grade of stainless steel and its protection level shall be submitted at the time of supply
35
74764
2616740
... More
SS Location box made of Spl Grade SS 304 of size as per Drg. No. DRM/SG/945 dtd 03.03.2011 (Half app. Case) or latest. Manufacturer's certificate in regard to grade of stainless steel and its protection level shall be submitted at the time of supply
25
60921
1523025
... More
Pad locks Godrej make, Hardened NavTal 7 lever, 65mm Dia with common key or similar product having same feature & technical data. 43
50
145
7250
... More
Supply of Standard Tools set as per Annexure.
1
37074
37074
... More
Office Revolving Chair Godrej Make Model No.9u02r Bravo Or Similar of reputed brand will be specified by Engineer in-charge
2
8361
16722
... More
Office Chair makes Godrej CH-7B or similar of reputed brand will be specified by Engineer in-charge.
8
2784
22272
... More
Office table with laminated top with three drawers on left hand side and one locker on the right hand side. Olive brown with duplicate keys. Make: Godrej Model T-9 or Similar of reputed brand will be specified by Engineer in-charge.
2
15550
31100
... More
Steel Plain Almirah with 4 adjustable slaves Size: 1980mm height, 915 mm width and 485 mm depth. Make: Godrej Storewel Plain Large or Similar of reputed brand will be specified by Engineer in-charge.
2
17010
34020
... More
Point insulation Complete set as per RDSO Specification IRS: S-40/84 for Switch bracket, Split-Stretcher bar & Gauge tie plates (52 Kg/60Kg as per site requirement). 49
2
1376
2752
... More
PPTC fuse 12V GP 16-400 (2A) for TF/TR circuit, make Raychem, Epcos, Siemens. 50
30
11
330
... More
PPTC fuse 24V GP 30-110 (1.4A) for Q series Relay (TPR). 51
30
11
330
... More
PPTC fuse 110V AC for Track Charger GP 250-185 (1.4A)
30
11
330
... More
Supply Polyolefin cab le channel o f s i z e w idth 240/340 mm, he ight 155/230 52 internal/external, length 1meter produced o f polyolefin with fire protection class K-1 in accordance with DIN 53438 Part-II for laying signaling/telecom cables, channel attachable to each other with male female swallow tail connectors and having a suitable detachable cover, as per RDSO STS/E/cable laying Precise Vol-IV and as per technical specifications.
2000
1936
3872000
... More
Miniature, Plug-in type, Tractive Armature, Universal AC lamp proving relay, Style QECX, 4F-4B Contact, for 110 V AC LED 54
12
5674
68088
... More
Time Element Relay (Clock work type) AG timer Siemens Make (No RSSK 30/0052).
2
6395
12790
... More
Miniature, Plug-in type, DC Neutral Line Relay, 24V DC 1000 Ohm , ACI Style- QNA1K, 6F-6B/4F-4B Contact
60
6444
386640
... More
Miniature, Plug-in Type, DC Neutral Line, Non AC Immunized Relay, Style QN1, 24 V DC, 8F-8B/12F- 4BContact, Code ABCDF/ABCDE Spec: BRS: 930; IRS S@10"59@ IRS S 23.
20
4159
83180
... More
Key Lock Relay working on 24V DC, AC immunize with different ward combinations (Three ward plates to be supplied with each relay). Key ward shall be specified by engineer incharge as per requirement.
12
9732
116784
... More
Electrically Operated Lifting Barrier complete set suitable for 110VDC/24V DC supply 58 with hand generator back up & motorized b o o m locking arrangements a s p e r RDSO Spec. SPN/208/2012 with the latest amendment. One set consisting of 02 No.s of Barriers of length 09.76 Mtr. along with Spares & tool kit mentioned in RDSO Spec. SPN/208/2012 clause 10.1 & 10.2. 59
2
488187
976374
... More
Road warning Flasher kit for LC gate as per circuit design
2
1759
3518
... More
Dual tone bell/buzzer with flasher arrangement 25W horn, (Make of any ISI approved firm) working voltage as per circuit design.
5
7206
36030
... More
Supply and Installation of Domino based Gate Panel size 12x 8 dominos as per drawing supplied by Engg .In charge
1
12222
12222
... More
Supply of Battery Charger self-regulating floor mounting type with 230V AC single phase input and output 24 V DC, 20A to specn. IRS-S- 86/2000 with latest amendment for Axle counter application. (Amdt. 4).
2
33312
66624
... More
Supply of Remote Terminal Unit (RTU) with 128 digital input &16 analog input as per 63 technical specification IRS: S-99 2006(Amdt-3) or latest. In addition RTU should have dual leased line modem. It should possible to connect RTU up to 12 Kms from main data logger. This includes rack for installation &Battery backup for 06 hrs.(Inspection by RDSO)No.
1
129348
129348
... More
Program switches, snap action, base mounting type along with acrylic cover and mounting bracket, 25A, 9 poles, and 3 positions make Siemens / Thakur or Similar.
4
12996
51984
... More
MS Sliding type mechanical Boom barrier assembly 11 to 12 Meter Long, movement drive mechanism, resetting & supporting stand suitable for Mechanical/ Electrical level crossing gate as an emergency arrangement as per Drg.
2
164636
329272
... More
Miniature 'E' type lock complete with keys as per RDSO Drg. No. SA 3473, 3373 & spec. IRS(S) 30/64. Ward to be specified by Engineer - in - charge.
6
2082
12492
... More
Standard Tool kits, Test and Measuring instruments required for Installation, testing, commissioning & maintenance of HASSDAC. Kit will includes all tools & measuring instruments as per ANNEXURE (Annexure shall be attached with CA).
1
115640
115640
... More
Supply o f Tools K it fo r Digital Axle Counter (Multi section/Single section). (MSDAC 68 comply to the RDSO spec. No. RDSO/SPN/176/2013/Ver.3 or latest and manufacturer's specification and SSDAC comply to the RDSO/SPN/177/2012,Ver.3 or latest respectively). The tool kit shall be minimum equipped with the following equipments: (i) All mechanical tools shall be of reputed make like Taparia/Bosch etc. (ii) Digital multimeter true RMS type of make Fluke 189 or similar reputed make with probe set - 1 No. (iii) Adjustable torque wrenches 25-135 N/mtr with 13 mm and 19 mm inserts- 1 set (iv) Set of spanners screw drivers and soldering iron - 1 set (v) Dummy wheel - 1 No. (vi) Marking Jig - 1 No. (vii) Adapter card - 1 No. (viii) Extended wired socket to interface with diag No. stic plug - 1 No. (viii) Selector switch on panel base - 1 No. (ix) DAC EC card puller etc.
1
144043
144043.4
... More
Supply o f self supported aluminum flat step ladder (conforming t o ISI) 5 ft . height. Ladder should be self- supported and it should be made up of rust proof Aluminum of Min 16 SWG. No plastic hinges/Step support should be used.
1
3089
3089.9
... More
Supply of Smart Cabinet/Rack for Housing of Various S&T equipments like KLCR, Reset 70 Box, IPS Indication Panel, CA VA Unit for FACS, SP AU for Point Reversal, Crank Handle, Quad Cable Earth Sensing Unit along with Fixing of KLCR (KLCR will be provided by Railway) as per instruction of Site Engineer, Make RITTAL, SANTEL, VERO , PRESIDENT, APC Schneider or similar reputed make. 71
1
58030
58030.77
... More
Supply of Fiber/ SMC/FRP/RCC Earth Chamber.
4
649
2596
... More
IS 13410: Glass Reinforced Polyester Sheet Moulding Compounds (SMC) Size of Sheet : 1000x1000x8 73
1
5388
5388.67
... More
Rubber Mat for Power Equipment room. (5mm thick).
20
121
2432.6
... More
Supply of CAT-6 cable. 1 Box= 305 mtr DAX, Nortal,Amp,Molexor Lucent make with identification mark /ferrules ect..
610
19
11590
... More
Maintance stool for relay room & battery room as per drg no. DY/CSTE/C/ADI/SUNR/ PIPAVAV GC /1. 3
1
2386
2386
... More
Panel Cum /VDU Block Instrument Table as per site Engineer-in charge.
2
36143
72286
... More
25 mm PVC conduit pipe with minimum 2 mm Thickness AS PER IS:9537(PART-3) OR LATESTWITH ISI making, each of length 3 meters. The material should be supplied from OEM/ Authorized dealer only
150
25
3750
... More
Automatic Media changeover of Modems working on redundant channels for data transmission on OFC / Quad / Microwave Radio. 6
3
32202
96606
... More
Modem for UFSBI (for use with secondary media OFC/Quad) 7
3
57610
172830
... More
Supply of Axle counter cable conductor's Earth resistance Sensing unit.
6
34856
209136
... More
Supply of Modem (E1-RS232) compatible with existing UFSBI system to work on backup 8 media OFC (via unframed E1-2 mbps from STM interface).working voltage: 24 VDC(+/-20%),& operating temperature:-10 deg. C to +70 deg. C. the modem shall be compatible withUFSBI/existing block system as per RDSO Spec IRS S:105/2012 or latest.
6
23538
141228
... More
Silane siloxine Alithatic Urethane resin Blend solvent Based high technology Membrane 9 Radiant Heat reflecting insulating thermal barrier coating with a Genuine product sticker when removed display "VOID" on each container as per attached technical Specifications. Firms Offer : Same as above. make / Brand : CYPRUSS
10
5144
51440
... More
Supply of one Quad VF 2T Transformer joint assembly of VF transformers 1120:470. IRS:TC 22/2021 ver1.1
-
-
10
... More
Half Round RCC pipes & collars of 150 mm internal dia (1+1 meter long) along with collars as per IS No. 458/2003 of NP type
2200
319
701800
... More
Phenolic laminated Sheet, grade P3 in standard size of 1220 X 1220 x 10 mm as per spec. No IS 2036 of 1995 or latest. Test report of manufacture to be supplied
35
5056
176960
... More
Phenolic laminated Sheet, grade P3 in standard size of 1220 X 1220 x 20 mm as per spec. No IS 2036 of 1995 or latest. Test report of manufacture to be supplied
25
9320
233000
... More
Supply of BIS listed semi automatic stainless steel fire extinguisher with UL approved 14 clean gas with auto manual reverse stainless steel valve 'NASA 200 MAR' having capacity of 02 Kgs and made of stainless steel 304 grade with Indian railways logo on each unit for camping coaches. Detailed specification attached in the annexure.ACCEPTED MAKE BRAND :NASA 200 MAR 15
12
27815
333780
... More
Thermo shrink Universal Jointing kit for Quad Cable (for straight joints) 16
10
2054
20540
... More
Supply of Remote Sensor unit for Audio Alram and Acknolwdegmnet
2
8295
16590
... More
Supply, Installation, testing and commissioning of Track Battery charger Monitoring System for 2V/4V/6V/8V batteris with accessories at nominated stations. General Scheme to be approved by Engineer unchage.
2
3951
7902
... More
Self contained, Air cooled, and Diesel Generator set along with canopy, 15 KVA single Phase
2
389973
779946
... More
Electronic LC gate Telephone system with voice logger facility as per RDSO Spec No RDSO/SPN/TC/51/2021
1
76136
76136
... More
Low Maintenance Lead acid Stationary Secondary Cells for S&T installations 2 Volt 200 AH
2
36649
73298
... More
SMPS based Integrated Power Supply System for Electronic Interlocking a s per RDSO/SPN/165/2012 version -3 or latest and Drg No. CSTE/6155/ 8 of 8. This includes transportation, installation and Commissioning of Integrated Power Supply System.
1
1109950
1109950
... More
SMPS based Integrated Power Supply System for IBS & LC Gate in RE-Section as per RDSO Spec. No RDSO/SPN/165/2012 version -3 or latest and Drg. No. CSTE/6155/ 2 of 7.This includes transportation, installation and Commissioning of Integrated Power Supply System.
1
902951
902951
... More
Electric Point Machine ,Non Trailable, Internal Locking, 220 mm Throw With IP 67 Motor, 1 Minimum AC Immunity 400Vac With Tools And Complete Accessories Including Complete Ground Connection And Al l Insulation, Crank Handle And Along With Clamp Point Lock 60Kg, TWS As Per Drg.No. RDSO/S/11000 As Per Rdso Spn. Irs:S- 24/2002 With Amd.01 Or Latest. IRS Type.
15
132689
1990335
... More
Main LED Signal lighting unit working on 110v ac as per RDSO specn. No. RDSO/SPN /199/2010rev.1.1 retrofit table in existing CLS housing (sa23002, s23024/m) Red Aspect.
-
-
1
... More
Main LED Signal lighting unit working on 110v ac as per RDSO Specn. No. RDSO/SPN/199/2010 rev.1.1 retrofit table in existing CLS housing (sa23002, s23024/m) GREEN Aspect.
6
7454
44724
... More
Main LED signal lighting unit working on 110v ac as per RDSO Specn. No. RDSO/SPN/199/2010rev.1.1 retrofit table in existing CLS housing (sa23002, s23024/m) Yellow Aspect.
17
8040
136680
... More
Main LED Signal lighting unit110v ac for calling on signal in Railway signaling as per RDSO/SPN/153/2011 (rev. 4.1)or latest
4
5663
22652
... More
ROUTE aspect LED signal lighting Unit, 110V Ac, retrofitable in existing CLS housing and compatible with AC LED ECR as per Specification No. RDSO/SPN/153/2011, Revision 4.1. Make /Brand: PTC
45
4719
212355
... More
Main LED Signal lighting unit110v ac for Shunt Signal in railway signaling as per RDSO/SPN/153/2011 (Rev. 4.1) or latest.
32
5418
173376
... More
Installation, wiring, programming, testing and commissioning of EI equipment supplied as per supply item in schedule 'A' including transportation from Consignee's depot to site. The works and materials for installation, wiring, testing and commissioning, grouting, cutting of floors, walls, refilling of the same, re-plastering, required CC/ masonry works, fixing/ placing/ laying of insulated ladders/ casing-capping/ cable trays/ RCC/GI pipes / Cables, termination of cables with lugs/ connectors, painting, / lettering are to be provided/ done by the contractor for the equipments supplied vide Item of Schedule "A" of this contract. This also covers the networking of built in EI Data loggers of all the stations to monitor the system to any other places where desired by Engineer-in- charge. Note: Installation shall be comply with RDSO Technical Advisory Note No STE/E/TAN/3012 dtd. 28.08.2014 or latest. Installation, wiring, programming, testing and commissioning of Operator VDU in Hot stand-by with Redundancy. Any Equipments/cards/Modules required for Hot stand-by with Redundancy shall be supplied & Installed by the Contractor. This also include supply of one no Godrej make operator chair model PCH7001 or better , one no. of composite computer & printer table (Godrej work station table or better) for keeping MT , one no Godrej make operator chair model PCH7001 or better. Termination of indoor/ PIJF cables in relay room on relays, tag blocks, CT racks as per approved wiring diagram including alterations/ modifications as required at site. Soldering to be done at all required termination. Dressing/ lacing of wiring shall be done neatly with help of dressing thread / plastic self-lock strip of suitable size. The tools/ equipments/ materials/ simulation boards required for testing shall be supplied / fabricated by contactor. This included replacement of modules/ cards/ LEDs/ equipments going defective during testing. Necessary power supply boards with required capacity plugs, sockets, surge & lightning protection boxes shall be supplied and installed by the contractor. 230V supply shall be arranged by Railways. In case supplies are required to be extended, from Power room / relay room then same shall be extended by the contractor with his own materials such as 1X16 sq. mm wires, cables, lugs, RCC/GI pipes, insulated ladders etc. After ST/LT testing, Factory Acceptance Tests (FAT) & Square Sheet testing system should be fault free while submitting to Railways, otherwise suitable necessary action can be taken by Engineer-in-charge. (i) Centralised EI at Amreli
-
-
1
... More
Earthing of EI equipment, relay racks and Power equipment etc. to be done along with the supply of all requisite materials. Earthing shall be in the form of Ring Earth conforming to RDSO specification No. RDSO/SPN/197/2008 (with a min. of 6 maintenance free earth electrodes) & RDSO Drawing issued under Railway Board letter No. 2010/Sig./SGF/EI (Ansaldo) Dated 22.06.11, made using copper rings with earth resistance less than 1 ohm. The earthing shall be maintenance free & earth enhancement compound should be used. The ring earth shall be connected to copper flat of size 25x3 2 mm in the relay room and IPS room. This copper flat shall be fixed on the wall to the entire breadth of the Relay room and IPS room as an earth bus bar and all earth connections shall be taken from it. A, B, C, & D class protection shall be provided for all EI equipment. Note: - This will also cover the earthing& necessary protection of EI equipment as per details given in the scope of work of Special Condition of Contract and other requirement given in Chapter of tender document & Pre- commissioning check list of EI system. The earthing and bonding and surge and protection device shall comply to RDSO-SIG0SPD(PROJ)/1/2020 Ver 00 (Guidelines on Earthing, Bonding, Surge and Lightning Protection System) and STS/E/TAN/3006 Ver 3.0 (TAN on Earthing, Bonding, Surge and Lightning Protection System)
1
130891
130891
... More
Training of Technician/ Jr. Engineer for installation, Commissioning, Testing, Repairs & Troubleshooting alteration, design of EI system, as per details given in Special Condition of Contract. (Hard copies of training manuals/ course module to be given to each participant).
1
33360
33360
... More
Training of Officers for installation, Commissioning, Testing, and Repairs &Trouble shooting of the EI system. (Hard copies of training material/ course modules to be given to each participant).
1
29070
29070
... More
Installation, wiring, testing, and commissioning of Data logger complete along with accessories using Contractors' own wiring & fixing materials as per the following configuration. (It includes loading of NETWORKING software, networking of data logger, installation of FEP & Fault 5 diagnosis system). The requisite communication cable/channel for networking will be arranged by Railway. 1024 digital & 32 analog inputs/ 4096 digital & 32 analog inputs. (All the Indoor & outdoor gears wiring in cataloged included in this along with laying 230V supply cable from IPS room,12 core cable from auto change over for monitoring supplied.) Note :- It included logging of all gears as per site incharge.
1
18811
18811
... More
Supply, Installation and Commissioning of EI VDU (Visual Display Unit, 4K with all suitable accessories Compatible to El Interlocking in Safe Mode 24x7 at controlling station). The item must comply minimum following specification:- a) Screen Size (Diagonal):- As below b) Resolution :- 4K 6 c) Viewing angle degree: - 178x178 degree d) Brightness :- 500 Nits e) contrast ratio 4000:1 f) Backlit :- Direct LED g) Jack Interface: - HDMI -3 no. 1.2 DP, DVI USB 2.0 -2 no. CI Slot RF In AV In Component In (RCA5 Type) Digital Audio Out RGB In (D-sub 15pin)-PC PC Audio Input RS232C (D-Sub 9pin) RJ45 Stereo mini jack. h) Optical Out :- Available Note: - Screen size will be decided as per instruction of engineer incharge. (i) Approximate Screen size 55 inch
2
86637
173274
... More
Supply and Installation of Modular power supply arrangement for VDU and industrial PC (Embedded PC) with input and output redundancy arrangement and Hot pluggable Modules as per RDSO specification. Make Gallant or similar. One set consists of 1. Input O- ring diode module with 7 potential free -1 No contacts (PFC) for two 110 V DC sources from IPS and single 110 VDC bus Qty 1 No. 2. Isolated Inverters (Master / slave) - Input-110 V DC Output: 120 V AC/220V A500VA - 02 Nos. 3. Isolated DC-DC convertors- Input : 110 v DC Output : 24 V DC/ 10A,Qty -10No.s 4. 3 U SS rack with back panel mother board /front panel power connectors inverter auto change over switch and all required over switch and all required protection circuits (3U height for main rack 132.5mm +/-10% & 1U height for mounting 44.5mm +/- 10%) Qty - 1 No. Make Gallant or similar.
3
272862
818586
... More
Supply & installation of Industrial Grade Embedded PC as per RDSO TAN no. STS/E/TAN/3007 dated 2.11.12 or latest.
2
179360
358720
... More
Design of ST/LT/TOC/Square sheet/RCC (Three copy) for approval. (i) Upto four line station
1
19743
19743
... More
Design o f Circuit Diagrams consisting Wiring/ Logic diagram, contact analysis, fuse detail, Input/output bit chart, VDU diagram, Interface etc. submission o f Three paper copies for approval. (i) Upto 50 Routes
1
148076
148076
... More
Design of Miscellaneous diagram consist of Floor Plan of Relay Room , Battery Room, 11 Power Equipment Room, Data logger room, Power Supply Diagrams along with power supply calculation, Earthing Diagram, Power panel diagram, IPS wiring diagram , Auto change over diagram, Block circuit wiring diagram, Digital Axle counter wiring diagram and all other relevant drawings (Three copy) for approval. (i)Upto four-line station
1
5429
5429
... More
Supply of completions ST/LT/TOC in original tracing along with AutoCAD copies in Pen Drive and six set copies after approval. (i) Upto four-line station
1
790
790
... More
Supply o f Circuit Diagrams consisting wiring/Logic diagram, contact analysis, fuse detail, Input/output bit chart, VDU diagram, Interface in AutoCAD in Pen Drive and Six set of Copies after approval. (i) Upto four-line station
1
29615
29615
... More
Supply of diagrams consist of Floor Plan of Relay Room, Battery Room, Power 14 Equipment Room, Data logger room, Power Supply Diagrams along with power supply calculation, Earthing Diagram, Power panel diagram, IPS wiring diagram, Auto change over diagram, Block circuit wiring diagram, Digital Axle counter wiring diagram and all other relevant drawing in original tracing along with AutoCAD in Pen Drive and six set copies after approval. (i) Upto four-line station
1
2961
2961
... More
Commissioning of T-Networking suitable for Networking to the existing Data Logger equipments. This includes supply of all equipment / accessories required for the purpose.
1
7521
7521
... More
Design and supply SWR Diagram on standard tracing paper of 95 grams for each station. Corrected version of SWR plans after checked & approved by Rly's 25 Ferro copies will be supply for each of the plans (i) For stations having up to 4 lines
2
24321
48642
... More
Preparation of SWR including supply of SWR booklets (25 Nos. per station). (i) For stations having up to 4 lines
2
34049
68098
... More
Design and supply of cable courage plan, location particulars, Cable termination rack particulars, cable meggering report, earth resistance particulars, Traction bonding diagram, 1/2 wire count sheet and any other drawing in AutoCAD in A3/A4 size. The contractor shall initially supply 3 sets of circuits complete for approval of Railways. Railways will return one set to the contractor duly 1 approved with alterations/corrections, if any. The contractor shall incorporate Railway's alterations/corrections in the tracings without any deviation and submit all tracings complete in all respects to the Railways along with PENDRIVE & 4 sets of final approved drawings. This includes designing of cable coreage plan based upon I.P in consultation with engineer-in-charge For small/medium yards.
2
69363
138726
... More
Installation of Relay Rack Assembly including IDF pillars if any complete with wall 2 supports, scaffolding, ladders, runway for cables, fixing of Relay / Relay group base plates, fixing of Tag blocks etc. The work shall be done as per approved plan, extant practice on WR & the instructions of Rly engineer at site.
7
10011
70077
... More
Installation of Cable Termination Racks Assembly complete including wall supports, 3 scaffolding, 8 way/ARA terminals /Screw less connectors, Tag blocks & other necessary accessories etc. The work shall be done as per approved plan, extant practice on WR & the instruction of Rly engineer at site.
6
9184
55104
... More
Installation wiring testing and commissioning of Fuse changeover system (FACS). This includes the provision of a common Buzzer & indication at the ASM Room & ESM Duty Room and the painting of fuse details. This also includes the fabrication of a frame for the installation of FACS at the Station/ LC gate where the installation of relay racks is not feasible.
17
15317
15317
... More
Excavation of cable trench as per cable route plan, 1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes 5 etc., covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m
3000
276
828000
... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtr to 0.6 Mtr wide 6 and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe covered separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No. CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.
250
292
73000
... More
Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm Dia & shall be done at the depth of minimum 1200 mm from the 7 ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtr long. The HDD with or without HDPE pipe as per direction of Engineer In charge. Note: HDPE pipe supply is taken as separate item. This item also includes cable laying (HDD boring).
170
1217
206890
... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300 mm deep in hard rock (Drg prepared by contactor & approved by Engineer In charge) 8 for laying of S&T cables where minimum required depth not possible & which is verified and agreed by Engineer In charge of the work or his representative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. Refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a separate item in the schedule of work
200
463
92600
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trucking. This also includes laying of cables in track crossings & road crossings. Item 9 includes provision of labels of colored plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be daggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes 10 270.00 Running 10
204
9407
1919028
... More
Placing of DWC/RCC pipes along with collars in trenches at places of track and road crossings, platform cuttings etc. also for straight cable laying. (Cable laying is covered separately.)
8100
8100
8100
... More
Laying and fixing of Medium class GI pipes 100 mm Dia (4.5 mm thickness) as per IS 1239 ( Part 1) 2004 or latest with coupling on culverts/bridges, perforated at a distance of 20 cm or less with 10 mm Dia hole, or at any other locations as decided by Site Engineer. The GI pipe is to be filled with chattered compound. It includes supply of all material required for fi Xing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. The e laying and fi Xing to be done as per RDSO drawings No. SDO/cable laying/011 and SDO/cable laying/012, issued vide RDSO document No. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014, or latest.
-
-
11
... More
Digging of cable pit (min2x2x1m) as per instruction of Site Engineer, supplying and filling of sand before and after coiling the cables, covering top of the cable pit with stones and providing brick masonry on all four sides of the cable pit and plastering thereafter.
3
11495
34485
... More
Supply and installation of RCC cable route marker engraved and painted on both side along the route every 50mm and route diversion as per Drg. No 4014/00/CC4 or latest/ Stone marker
400
426
170400
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination 14 rack etc at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
12600
6
75600
... More
Excavation and Casting of foundation for main signal post as per CSTE/3122 (WR) with 15 contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost.
20
8229
164580
... More
Excavation and Casting of foundation for Shunt Signal as per Drg. No. CSTE/6090 with 16 Contractor's own materials including Cement and Anchor Bolts of Standard Size. The required scaffolding, Ferma etc. for Casting of foundation will have to be brought by the Contractor at his own cost
5
6412
32060
... More
Excavation and Casting of Apparatus Case foundation with contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost.
-
-
381490
... More
Installation of Apparatus Cases with miniature 'E' type lock on CC foundation. This includes filling of location foundations with river bed sand and plastering on top of the sand. 'E' Type lock will be provided by Railway.
-
-
53290
... More
Fabrication and fixing of SMC sheet in location box by providing all fixtures as per 19 Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per Drg and arrangement similar to SK 783-1/2. With latest alterations & as per instructions of Rly engineer at site. Note: SMC sheet will be taken in place of phenolic laminated sheet.
-
-
99870
... More
Cement concrete work for miscellaneous items in the ratio 1: 3: 6. Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).
10
4251
42510
... More
Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 21 cement and sand mixture both sides, 20 mm thick each with contractor's owned class II bricks, including excavation, curing, grouting, bolting etc. wherever required. Bricks sand and cement to be supplied by the contractor.
5
2139
10695
... More
Erection of CLS Post with base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards with contractor's own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt signal if any... The work shall be done 22 as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. It also includes supply of padlock for signal units and cable termination box. X' arms to be provided by the contractor till the signals are introduced. The Item includes cutting of Signal post if required by Site In charge. 2/3/4 aspect signal unit mounted directly on signal post.
5
3108
15540
... More
Erection of CLS Post with base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards, signal name plates / boards if any with contractor's own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt 23 signal if any. The work shall be done as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. It also includes supply of padlock for signal units and cable termination box. X' arms to be provided by the contractor till the signals are introduced. The Item includes cutting of Signal post if required by Site In charge. 2/3/4 aspect signal unit mounted on offset bracket with junction type route indicator 1/2/3 or multilamp lamp route indicators mounted on signal post.
15
2140
32100
... More
Fixing of Calling-on Signal/A-Sign/AG-Sign unit on signal post. The item includes fixing 24 of Co- On signal /'A' sign/ 'AG' sign unit on signal post with bracket, hood etc. Item includes supply bracket & fixing materials etc. by the contactor. The item also includes termination of cables & wiring inside Co- On signal /'A' sign/'AG' sign unit as per standard practice. Note: This Item must be operated individually, Not to be operated in Installation/Erection of CLS.
3
2145
6435
... More
Erection of Position Light Shunt signal with Base, Post, and Signal unit. Wiring & Fixing of Number Plate .The work shall be done as per instructions of Rly engineer at site. 26
5
1877
9385
... More
Erection of Position Light shunt signal on Offset bracket on main signal.
7
1882
13174
... More
Installation of DC track circuits covering points zones also. The item includes provision of continuity bonds of seven strand PVC jacketed wire/ GI wire 8 SWG on rail joints after drilling bond- hole of 7.0/7.1/7.2mm Dia (double bond with sleeves and rail clips are to be provided at each rail joint), insertion of insulated block joint, fixing of Track lead Junction box on MS angle two numbers of size 40X40X5 mm 1200 mm length for track feed/ jumper / track relay ends of track CCTs (as per 27 double TLJB arrangements) and also for fixing jumper cables as per insulation diagram WR Drg No. CSTE/6055 and standard practice, making rail connections through suitable insulated sleeves from Track lead Junction box at TF, jumper & TR end with seven strand PVC jacketed wire /GI wire 8 SWG, rail clips for fixing bond wire on the TLJB as per standard practice, termination of tail cables on bootleg terminals etc. TF/TR wiring shall be fixed on the suitable arrangement on PRC sleepers with the help of hooks. Hooks shall be provided on PRC sleepers with the help of suitable steel bracket. This item also includes fixing & supply of channel pins etc. The item also includes supply of MS angles/ trestles, GI wire 8 SWG / seven strand PVC jacketed wire, hooks, rail clips etc.
28
7684
215152
... More
Erection, Fitting and Rail connection of Track Lead Junction Box on two supports 29 (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40 x 40 x 5 mm 1200 mm length This will include drilling of holes for track lead/side connections on rail. The work shall be done as per Drg. No. S&T/Const./JHS/T 115 &instructions of Rly engineer at site.
20
1351
27020
... More
Fixing of ARA Terminals /Screw less connectors and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry.
9000
13
117000
... More
Installation of Maintenance Free Earth Electrode for Maintenance Free Earth spec of RDSO/SPN/197/2008.
100
5868
586800
... More
Installation of Earth Electrode including MS flat for clamp etc. and connection to signalling equipments, lever frames, apparatus cases, signal, relay rack, block instrument, etc. as per technical specification given. This item includes digging of pit in earth 3 M deep & fixing earth 32 electrode p i p e , c a s t i n g o f c e m e n t concrete enclosure & cover a s p e r RDSO/SPN/ 197/2016.Soiltreatment to be done as per std. practice. This item includes provision of MS Flat, Earth lead wires and Soldering of lead wires. The other end o f the wire i s t o b e connected t o block equipment, power equipment, cable sheath, and signals etc. as per site requirements. 7strand GI wire shall be used as earth lead wire. Supply of earth electrode is covered in other Item').
40
1475
59000
... More
Fabrication CSTE/6181), 'P' Marker (Drg No. CSTE/6182), Arrow Marker (Drg No. CSTE/6183), 'G' Marker (Drg No.and fixing of 'A' Marker (Drg No. CSTE/6180), 'AG' Marker (Drg No. CSTE/6184), 'C' Marker (Drg No. CSTE/6185). Marker disk on signals as per standard practice All material required for this work shall be supplied by Contractor.
35
1214
42490
... More
Supply & Fixing of Stop Board, Block section limit Board, goods warning board and all other boards with contractors own material. The work shall be done as per instruction of Rly. Engineer incharge as per IRSEM.
6
5245
31470
... More
Fixing & wiring of QNA1 / QNA1K relays for GPR Circuit in apparatus case as per Standard practice. Fixing and wiring material shall be supplied by the contactor.
60
358
21480
... More
Wiring, installing of Magneto / DTMF telephone in ASM office, at locations, Relay Room, Point locations on both directions and siding Point Control locations as per instructions of Engineer ln- Charge for traffic purpose.
2
176
176
... More
Charging of Lead Acid Batteries with contractors' own battery grade sulphuric acid and 37 distilled water with a minimum of two charge-discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per the extant practice of W.Rly & instruction of the Engineer-in-charge. Detailed measurements of initial charging shall be recorded jointly by the contractor & Rly's site-in-charge. (a) 2V 80AH
84
378
31752
... More
Earthwork in filling in embankment, guide bunds, around buried type abutments, bridge gaps, trolley refuges, rain bunds if provided, platforms etc. with earth excavated from outside railway boundary entirely arranged by the contractor at his own cost as per RDSO's latest guidelines 38 and specifications and special condition of contract including all leads, royalty, lifts, ascents, descents, crossing of nallahs or any other obstructions. The rates shall include all dressing of bank to final profile, demarcation and setting out of profile, site clearance, removing of shrubs, roots of vegetation growth, heavy grass, benching of existing slope of old bank, all handling/re-handling. Taxes, Octroi and royalty etc. as a complete job. Cut trees shall be property of railways and to be deposited in the railway godown unless specified otherwise in the Special conditions of contract.
10
146
1460
... More
Hiring of JCB Machine (in good working condition) for leveling and dressing 39 ground/dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the states of operation, as per instructions of engineer incharge and vehicle shall not be more than three years old.
80
1109
88720
... More
Providing assistance to ESMs/TCM during monitoring Inspection & supervision of signal gears throughout the period as per of instructions of SSE (Sig) In-charge during day/night upto eight hours per day.
240
489
117360
... More
Dismantling of Concrete foundation/ Demolishing RCC/CC/Stone work /Cutting Tar/ 42 carpentering/ CC Flooring / Precast concrete slab/ Brick work including leading the debris inside Railway limit or outside Railway limit as directed by site in charge. This work to be done by contactors with his own vehicle and labour.
30
594
17820
... More
Shifting of existing full location boxes coming in the alignment of new line. The workincludes losing & removal of soil around location boxes by excavating soil around foundation, making of pit for shifting of location box horizontally opposite to railway track up to 0.5 to 1.0 mtr. This includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Location Boxes. Location box shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in-charge at site. The work may affect train working hence the work shall be done as per margin only or during traffic block only.
12
3218
38616
... More
Shifting of existing half location boxes coming in the alignment of new line. The work includes losing & removal of soil around location boxes by excavating soil around foundation, making 45 of pit for shifting of location box horizontally opposite to railway This includes loosing of existing cable coils without any damage. The excavated soil shall be back filled after shifting of Location Boxes. Location box shall be shifted by push method with the help of jacks or by crane by contractors own expenditure under instructions of engineer in-charge at site. The work may affect train working hence the work shall be done as per margin only or during traffic block only.
10
2357
23570
... More
Preparation and fixing of location box board on 03 mm ACP sheet with size 12 x 18 size A3 for location box including pasting of printed/ painted vinyl sheet and lamination (printing/painting of location detail on vinyl sheet covered in schedule item separately).
150
227
34050
... More
Lettering & Numbering of detail and description writing of on relay rack, relays, cable 47 termination rack, battery &power equipments, IPS, operating panel, axle counter etc. constituting entire system with contractor's own paint and writing material. The work shall be done as per extant practice on W.R Rly & instruction of Rly engineer at site.
2
3554
7108
... More
As and when required by the Engineer in charge arranging /providing of labors for 48 various safety related works such as protection of track etc. with contractor's T&P, equipment, hand signal flags, spanners, hammers, etc. as per specification special conditions and detailed scope of work as furnished in the tender and directed by the engineer incharge.
240
613
147120
... More
Fixing of Electrical Point Machine on the extended sleepers at points as per std. practice and as per RDSO Drg No. SA 91 51-52 or 9710 or 9161 as per section of rails used. Item includes fixing switch extension bracket, providing insulation f o r switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting the point machine with crank handle. The item also includes : (i) Complete material for installation like ground-connections, switch extension brackets, point insulation material, I pipes, wiring materials, various fixing nuts & bolts including 49 castle nuts, spring washers (ii) All smithy & fitting works required at site for complete installation. (iii) Installation of gauge tie plate & providing insulation for gauge tie plate (Insulation in William Stretcher Bar will be Provide by Railways). (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes / location box /cable hut as per extent practice on WR and the instruction of Railway Engineer at site. (v) Supply and fixing of suitable size GI pipes with flange for taking cable into point machine. Note ; The ground connections shall be suitable to the Point Machines as specified by Engineer-in-charge and shall be suitable to the point lay out i.e. 60 Kg. / 52 Kg / 90R as per yard layout. Electrical Point Machine and M- 6 / Screw less terminals will be supplied by Railways / covered in Schedule separately.
15
24970
374550
... More
Supply & Fixing of Protective screen of expanded metal 12 SWG of Size 1200 X 1500 mm on Signaling as per standard practice for protecting against voltage in AC Traction area as per instruction of Engineer In Charge.
2
4556
9112
... More
UL/EN/FM/VDS/LPCB approved Microprocessor based Networkable Analog addressable and modular type of Fire Alarm Control panel with display, in built changing facility and provision of GSM module suitable to send SMS to configured mobile numbers.
2
67358
134716
... More
Supply, Installation, Testing & Commissioning of Analogue Addressable Multisensor 53 Detector with multiple sensitivity (adjustable at site) levels e.g. smoke, heat, rate of rise heat etc, programmable for timed automatic sensitivity selection with base, and other accessories as required.as per RDSO specification no. RDSO/SPN/217/2021 ver 3.0 or latest.
12
3073
36876
... More
Analogue Addressable, resettable Manual Call point with inbuilt integral short circuit isolator having status LED for alarming & standby mode, Electronically addressed.
-
-
54
... More
Supply, Installation, Testing and Commissioning of Analogue Type Linear Heat Sensing cable (LHS) / Linear Heat Detection (LHD) tube compying to RDSO/SPN/217/2021 (Ver. 3.0 or latest) As it is the latest UL or FM or VDS or LPCB approved / listed. 56
300
680
204000
... More
Liner heat sensing (LHS) interface module.
2
54194
108388
... More
Supply, Installation, Testing and Commissioning of aspirating (Air Sampling) Type smoke detector with four zone interface module and isolator with power supply unit, back box and all other accessories as per the RDSO Specification RDSO/SPN/217/2021 ver 3.0 or latest) 58
2
149203
298406
... More
UV/IR Flame detector with required modules. 59
2
72222
144444
... More
Hooter cum Strobe.
2
5845
11690
... More
Fire survival circuit integrity cable i.e. armored cable & power cable with all accessories for connection of all fire alarm devices 2 core 1.5 Sq.mm.
400
77
30800
... More
Supply, Installation, Testing & Commissioning of relay module with back box and all other accessories as per the RDSO specification No. RDSO/SPN/217/2021 ver 3.0 or latest.
2
3912
7824
... More
Supply and fixing of PVC pipe of 25 mm size of IS standards on wall/floor etc All necessary items like screws/nails required to be supplied by contractor. Inspection by representative.
400
35
14000
... More
Laying / drawing of various type of cables on PVC pipe /capping casing, or cable trays, ladder,shelter etc as instructed by Railway engineer at site. (Indoor cables to be drawn through pipe,outddor cables if required o be clamped onwall/Fl 64
400
5
2000
... More
Addressable loop powdered sounder cum Strobe with inbuilt fault isolator.
2
7641
15282
... More
Auto telephone dialer (GSM) to send the pre-recorded message to multiple mobile Nos. programmed 66
2
6376
12752
... More
Power supply Unit 24VDC, 5 Amps, with two batteries.
2
27946
55893.6
... More
Installation of Central Evaluator of axle Counter, wiring from CT rack to Central Evaluator, installation and wiring of the reset box, LV box (if required) and associated power supply wiring. This includes supply of shielded cable of required conductor size for wiring between CT rack to 68 evaluator rack, all other wires, power supply cable and wiring materials. The power supply cable from power room to Central Evaluator should not be less than 10 sq.mm PVC wire. Earthing as per OEM's guidelines & specification with their own material. This also includes painting and writing work on evaluator as per site requirement. NOTE: Installation /programming / configuration / commissioning of Axle counter equipment to be carried out in accordance with latest guidelines issued by Railways/ RDSO preferably by Authorised representative of OEM.
1
13116
13116
... More
Transportation of S&T material leading up to 1 Km including Loading from Starting point, unloading & Stacking at destination. 70
10
505
5050
... More
Extra for each additional 1 Km or part thereof.
10
5
50
... More
Installation, Wiring and testing of Integrated Power Supply System. This includes power distribution connection to bus bars and relay racks in the room with contractor's own wiring materials and fabrication and fixing of AC/DC power distribution board made on 8mm thick SMC sheets or any 71 standard make with connections suitable for 32 A. Wiring to be done considering site requirement, depending upon the load with suitable wires, lugs & glands as per instructions of Engineer-in-charge. The work includes installation of ELD's, fixing & wiring of change over switch(program switch) for selection of DG set supply (DG1 & DG2) and wiring of change over switch (program switch) for selection of mains or DG supply. This item also includes supply & fixing of ladder along the wall for carrying power supply wires/cables from IPS room to Relay room/power room etc. Any masonry work required will be carried out by contactors own material.
-
-
134634
... More
Design and supply of cable courage plan, location particulars, Cable termination rack particulars, cable meggering report, earth resistance particulars, Traction bonding diagram, 1/2 wire count sheet and any other drawing in AutoCAD in A3/A4 size. The contractor shall initially supply 3 72 sets of circuits complete for approval of Railways. Railways will return one set to the contractor duly approved with alterations/corrections, if any. The contractor shall incorporate Railway's alterations/corrections in the tracings without any deviation and submit all tracings complete in all respects to the Railways along with PENDRIVE & 4 sets of final approved drawings. This includes designing of cable coreage plan based upon I.P in consultation with engineer-in-charge For small/medium yards.
1
9873
9873
... More
Supply of final Cable Route Plan as per laid cable duly measured at every 30m clearly indicating distance of laid cable from fixed point of reference & indicating all track crossings and tail cables in original tracing along with Auto CAD in Pen Drive and Six set copies after approval.
2
1580
3160
... More
Preparation of Cable Route Plan of buried S & T Cables using Radio Detector 8200 GS or 74 Similar model GPS Model,DGSP and Drone for Per Trench per Km. For existing cables a s per the instruction of Engineer in- charge. Submission of Drone Report in Hard Copy 1 set and DGPS output in KMZ File format.
5
53987
269935
... More
Fixing of Junction type Route Indication 1-Way/2-Way/3-Wayon the top of the signal post.
7
738
5169.5
... More
Tripod Earthing of HADAC to be done along with the supply of all requisite materials. 76 Earthing shall be in the form of Tripod Earth conforming to RDSO specification No. RDSO/SPN/197/2008 (with 3 no.s maintenance free earth electrodes), with earth resistance less than 1 ohm. The earthing shall b e maintenance free & earth enhancement compound should b e used. The earths shall be interconnected by copper strip of size 25x3 mm.
16
37526
600425.76
... More
Supplying & fixing of key box made of MS sheet/ wood with a glass front and padlocking 77 and sealing arrangements per std practice. Pad lock to be supplied by the contractor. All material i.e. wood, handle, hinges, glass sheet of 3 mm thick to be supplied by the contractor. Box to be powder coated/polished and description/size to be as per instructions of Engineer in - charge.
2
1392
2785.66
... More
Supply, installation, fixing, wiring, testing and commissioning of Common Audio-Visual Alarm Unit (CAVA)-for Fuse Auto Changeover system as per RDSO specification RDSO/SPN/209/2012 Rev. 2.0 or latest.
2
2565
5131.22
... More
Auto CAD engineer to be provided by contractor (the CV to be got approved by railway) Work of his/her given in technical specifications. He/ She will do duly in Dy. CSTE/C/office as well as in Field for making signaling drawing, Survey etc.
12
31233
374804.64
... More
Fixing of KLCR and its with this includes supply of MS sheet box for fixing of KLCR relay along with push button etc. (KLCR in other shedule)
7
5388
37716
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Full Case.
30
128
3840
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Half Case.
-
-
83
... More
Design & Supply of circuits and plans to suit layout given in the signalling plan of IBS/ABS/LCGATE. All plans and wiring diagram shall be prepared on Auto cad Drawing and supplied 84 with CD/ USB Pen Drive.This will include supply of: 1. Control cum Indication panel diagram, 2.Route section plan, 3.squaresheet, 4.wiring diagrams 5. Relay rack/ Relay arrangements 6.Bus bar details, 7.Fuse analysis 8.contact analysis 9.Relay room tag block analysis 10. Panel tag block analysis, 11.Power panel diagram 12. IPS wiring diagram 13.Auto change over diagram 14.Power equipment arrangement with program switch.
2
12900
25800
... More
Installations, wiring, testing and commissioning of Remote Terminal Unit complete 87 along with accessories using Contractor's o w n wiring &fixing materials. (It includes loading of NETWORKING software and networking with data logger. The requisite communication cable/channel for networking will be arranged by Railway.
1
6720
6720
... More
Installation & commissioning of Sliding booms with E type lock and KLCR. This includes wiring of KLCR, running of cables, necessary, painting & transportation of materials from store to site. All material required to commissioning of slide booms on gate will be supplied by the contactor.
2
15612
31224
... More
Supply and fixing of CH/KLCR boxes appropriate size in field / in location boxes / in SM 91 office / at LC gate as per site condition. It should be made of Hylam /wooden (teak wood) of highquality as per requirement. Item includes supply of any minor bracket nuts, bolts and hole drilling MS angle, MS plate etc. It also includes fixing of KLCR relays in the boxes. Prior approval to be taken from Engg. In charge before supply of box.
4
1536
6144
... More
Design,supply, testing and commissioning of Remote Diagnostic and Predictive 1 Maintenance System (RDPMs) as per Draft RDSO document No. RDSO/RDPM/FRS/2021; as per Signalling Plan Enclosed. (The Detailed break up of various modules/components are enclosed separtly for annexure.The detailed of Design/schematic drawing, make and model of various product being proposed to be provided for RDPMS system.)
2
3319284
6638568
... More
Manual Horizontal Auger boring for crossing of Road at depth of 1.0m/1.02m from ground level including insertion of 100mm dia (with thickness 3.65mmm) GI pipes/couping etc. all complete as per direction of engineer in charge. supply of GI pipes is covered separately in schedule 'A'
500
1007
503500
... More
Laying of half round RCC pipe after laying the cables in the trenches. (Cable laying is covered separately)
-
-
3
... More
Complete painting and varnishing work of all S&T Gears at a station not covered else where in the schedule. This includes painting of signal posts and fittings, apparatus cases, point machines, junction boxes, signal machine, rail post etc. complete. This also includes varnishing, 4 description writing on terminals, apparatus cases, point machine, Signal Nos. and other details as per S.E.M. and instructions of Engineer at site. Item includes painting of distance of main signal run from GP on each GP nearest to cable run and painting of distance of signal base from nearest line on the signal base. At least two coats of paint is to be applied besides primary coating of red oxide. This includes supply of paints, varnishes and all material required for complete painting work at a station. This includes painting of all existing S&T gears also.
-
-
95486
... More
Fabrication and supply of equipment rack of 18' gauge of M.S. sheet for housing of signaling and telecommunication equipments installed in station master office.
-
-
81560
... More
Supply, Installation, testing and commissioning of LED indication system with 6 indication, buzzer & acknowledgement button up to 6- line station with interface facility to existing data logger and modification of data logger embedded software when a station master fails to set the point against the occupied line, within stipulated time after arrival of the train.
2
47729
95458
... More
Laying of UTP CAT-6 cable through steel pipes/casing caping etc. as per technical specification
610
8
4880
... More
Shifting of existing Signal along with foundation as per site requirement. This inclusive of required labour, machinery like hydra, JCB etc.
8
7730
61840
... More
Preparing of SIP of each station prepared of yard diagrams in CAD and submit check 9 print. After making correction/modification or alteration return us corrected copy of each diagram in turn and correct all this correction in soft copy & PDF copy of diagram and make diagram completely. All diagram take out color print venyle print with lamination and frame with hanging arrangement. 10
-
-
34694
... More
Supply and fixing of cable truff of 4 inch x 4 inch
100
328
32800
... More
Installation of Axle counter cable conductor's Earth resistance Sensing unit. Microcontraoller based for 12 nos counductors without cable
6
3815
22890
... More
Supply of ferrules of different colour, printing termination details/ functions in different colours as per Railway specification and installation in location box CTR and power board etc. All the materials required for the work shall be supplied by the contractor.
12000
11
132000
... More
Supply, Instllation, Testing and Commissining of CPVC Pipe for Aspiration Detecton 13 system as per RDSO/SPN/217/2019 Ver.3 or later shall be as listed / approved by UL or VDs or LPCB with appropriate equivalent standard.
50
825
41250
... More
Translation of Station Working Rulesfrom english to hindi and framing outin DIGLOT form (or similar software)as per extant Rly practice. Therequired SWR in english will beprovided by the contractor and hasbeen covered separately in item. 15
2
5239
10478
... More
Fixing of Jn. Route Indication 1-Way/2-Way/3-Way on the top of the signal post.
2
713
1426
... More
Charging of Lead Acid Batteries with contractors' own battery grade sulphuric acid and 16 distilled water with a minimum of two charge-discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per the extant practice of W.Rly & instruction of the Engineer-in-charge. Detailed measurements of initial charging shall be recorded jointly by the contractor & Rly's site-in-charge. 200 AH
28
1030
28840
... More
Supply, Installation Testing and Commissioning of block proving by digital axle counter (BPAC) using UFSBI for Single line operation as per RDSO specn. No IRS/S/105/2012 (ver.0) it comprises of auto change over facility for quad and OFC working. Necessary modem for quad and ofc should be supplied along with auto changeover arrangement details are as follows. (i) Universal fail safe block 1 interface (UFSBI) with complete accessories as per Rdso specn no. IRS/S/104/2012 (ii) block panel as per Rdso s-32019 (iii) relay rack with locking and sealing arrangement duly wired as per Rdso: s: 32020 along with complete relays. (iv) Block telephone with accessories as per Rdso/spn/191/2005. (v) Automatic media changeover along with additional modem as per manufactures specification for BPAC using ufsbi (item no i) for supply of above items. Unit will be in set consisting of 02 no.s of each items.
1
973701
973701
... More
Supply, Installation, Testing and Commissioning of High Availability Single section digital axle counters with Dual sensor system as per RDSO/SPN/177/2012 version 3or latest. This includes The supply of High frequency web mounting type Tx coil/Rx coil, VR/PR Box duly wired, Vital 1 relays, PR Relays, Clamp with deflector plates & hardware, Dual display reset box with auto resetting facility, Surge voltage protection devices and filter card to be mounted on din rail etc. as per OEM for complete installation & testing& commissioning of(HASSDAC) system NOTE: One set of HASSDAC system will include equipment required to monitor One Up line or One Den line of a full Block Section between two stations. Note: - "Supply of HASSDAC as per RDSO specification along with outdoor industrial grade enclosure (Approved by Railways) similar to Rattle/Pyrotech make.
2
758153
1516306
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%