Rashtriya Raksha University Tender
... More
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Rashtriya Raksha University Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 May 2025
Closing Date2 Jun 2025
Tender Amount₹ 7,37,02,368
Technical
Technical
Financial
Additional Eligibility
Technical Capacity
... View More
The required prior work experience for the bidder includes the completion of similar works during the last seven years. The bidder must have completed similar works of a certain magnitude, specifically: - THREE SIMILAR WORKS EACH COSTING NOT LESS THAN RS. 2.95 CRORES - OR COMPLETED TWO SIMILAR WORKS EACH COSTING NOT LESS THAN RS. 4.43 CRORES - OR COMPLETED ONE SIMILAR WORK COSTING NOT LESS THAN RS. 5.90 CRORES. The bidder must also have an Average annual financial turnover of RS. 3.70 Crores of Similar works during the immediate last five consecutive financial years. The experience will be evaluated based on the performance report of the similar works, considering factors such as time overrun and quality, with a maximum of 20 marks for experience in eligible similar nature of work during the last seven years. To become eligible for short-listing, the bidder shall secure at least 50% marks in each section, including experience, and 60% marks in aggregate. The value of similar works is required to be mentioned in crores of rupees. The bidder is required to furnish the List of eligible similar works successfully completed during the preceding seven years in ‘Form C’, which includes details such as the name of the work/project, location, cost of work, date of commencement, stipulated date of completion, and actual date of completion. The percentage of similar works completed is not explicitly mentioned, but the bidder must have sufficient experience in eligible similar nature of work during the last seven years to secure at least 50% marks in the experience section. The bidder must have completed at least one project of specialized Multipurpose Training Tower, or attach a copy of the letter of agreement/MOU entered into with the manufacturer/special agency for Multipurpose Training Tower. The bidder shall submit a list of technical and administrative employees stating clearly how these would be involved in this work within 15 days of award of work, and must have sufficient number of technical and administrative employees for proper execution of the Contract. The bidder shall furnish a solvency certificate of value not less than Rs. 2.95 Crores certified by his bankers. The bidder must have one Operational Office in Gujarat. To become eligible for short-listing, the bidder shall secure at least 50 % marks in each section A, B, C, and D and sixty percent marks in aggregate.
Costs
EMD
₹ 18,43,000Document Cost
₹ 21,240Tender Fee
Refer Documents
Summary
Construction Of Cricket Pavilion And Multipurpose Training Tower
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RRU_860633_1Tender No
RRU/CDFM/Cricket_Pvl/25-26/04Tender Authority
Rashtriya Raksha University ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
CPWD_Technical_Specification - Civil and Electrical
Cricket_PVL_TechnicalSpecification
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer- incharge. All kinds of soil
710
1
710
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
168
1
168
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
240
1
240
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
248
1
248
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
116
1
116
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
59
1
59
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
140
1
140
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
a) Concrete of M25 grade with minimum cement content of 330 kg /cum : All works upto plinth level
75
1
75
... More
b) Concrete of M25 grade with minimum cement content of 330 kg /cum: All works above plinth level upto floor V level
342
1
342
... More
c) Concrete of M30 grade with minimum cement content of 350 kg /cum: All works upto plinth level
134
1
134
... More
d) Concrete of M30 grade with minimum cement content of 350 kg /cum: All works above plinth level upto floor V level
80
1
80
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
22872
1
22872
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
46314
1
46314
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
432
1
432
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
1346
1
1346
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
841
1
841
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases
11
1
11
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Extra for shuttering in circular work (20% of respective centering and shuttering items)
85
1
85
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
21
1
21
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
101
1
101
... More
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT: 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
1146
1
1146
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
271
1
271
... More
Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers.
170
1
170
... More
Interior Paint : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
2027
1
2027
... More
Wall Primer: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
2027
1
2027
... More
Putty: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2027
1
2027
... More
Exterior Paint: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
298
1
298
... More
Exterior Texture Paint (Apex Ultima Allura Torino of Asian Paint code - PRODUCT CODE 5417): Providing and applying Stone finish Exterior Texture Paint in 2 coats paint + 1 coat primer with approved brand & manufacture to give an even and smooth shade of color of approved shade after thoroughly cleaning the walls by water and brushing to remove all dirt and remains of loose materials, up to all level above plinth complete, scaffolding to any height, curing etc complete. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, performance waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.
10
1
10
... More
Supplying, diluting & Injecting chemical emulsion for Pre constructional Anti Termite Treatment With Chlorpyriphos/Lindane E.C. 20% with 1% concentration in 3 stages creating a continuous chemical barrier all-round the building including diluting in water as per manufacturer's specification conforming to IS 6313: 1981 in under & all around raft slab, beam, footings, column pits, trenches, wall trenches, backfill, plinth filling, junction of wall and floor, external perimeter of building, surrounding of pipes, over the top surface of the consolidated earth etc. for all lead and lift.. The treatment shall be carried out by specialized agency specified by the Client/ Consultant. Plinth area at ground level excluding open courts shall be measured. Treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration
824
1
824
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
92
1
92
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish, Size of Tile 600 x 600 mm (Toilet area flooring)
97
1
97
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dedo, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (Toilet area dedo and skirting)
160
1
160
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
252
1
252
... More
Kota Stone flooring: Providing and laying Mirror polish Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
730
1
730
... More
Kota stone Skirting: Providing and laying Mirror polish Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing, nosing complete.
41
1
41
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills, door frame and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red (Door Frame)
30
1
30
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills, door frame and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red (Window sill)
15
1
15
... More
Fibre cement Board/Plank flooring: Providing and fixing for Flooring application to be use Shera pro fibre cement Board 18mm thick exterior grade with a minimum density of 1300 kg/m3. With a PH value between 7 to 8.it is with composition of cellulose fibre,cement and sand. 100% Non Asbestos,weather and water resistant. Termite proof.
Board fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Work complete including all type of material, fittings , fixtures,Finish, safety measures , loading , unloading , transporation, all leads, accessories, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications & instruction of Client/EIC.
108
1
108
... More
Granite/ Artificial stone Basin Counter/ Handwash / Drinking counter: Providing & fixing two layers of wash basin counter, first layer using 25mm thick Kotastone of approved shade and second layer using approved shade and sample of 18 mm thick Mirror finish Granite, joined together with 1:4 Cement mortar bedding / approved tile adhesive , to true plane & level or to slopes, or close jointed with cement slurry with pigment of matching shade and colour and finishing with the same, including dedo 1'6", cutting kotah & tile as per required shape & size to fit Wash basin & 4" facia with moulding, nosing, chamfered front edges, fixing, disposal of debris etc. finished as per design in detail drawing and instruction of Architect/EIC.sample mock shall be approved from Architect/EIC. Basic rate of stone is 130/- Sq.ft
12
1
12
... More
Granite / Artificial Kitchen/pantry Platform: Providing & fixing two layers of Pantry Platform, first layer using 25mm thick Kotastone of approved shade and second layer using approved shade and sample of 18 mm thick Mirror finish Granite, joined together with 1:4 Cement mortar bedding / approved tile adhesive , to true plane & level or to slopes, or close jointed with cement slurry with pigment of matching shade and colour and finishing with the same, including dedo 1'6", cutting kotah & tile as per required shape & size to fit sink & 4" facia with moulding, nosing, chamfered front edges, fixing, disposal of debris etc. finished as per design in detail drawing and instruction of Architect/EIC.sample mock shall be approved from Architect/EIC. Basic rate of stone is 130/- Sq.ft
4
1
4
... More
Single Leaf Flush Door finish with laminate: Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished with both side 1 mm thick VNR laminate as approved sample, Hardware system as per approved make & Sample (Hinges, Mortise lock, Door stopper ) . work complete including all type of hardware, fittings , fixtures as per instruction of Client/ Architect etc complete as per detailed drawings and specifications. sample mock shall be approved from Architect/Client. Equivalent to VNR Series Laminate. Basic rate of VNR Laminate is 45 Sq.ft
26
1
26
... More
Single Leaf Flush Door finish with laminate (Toilet door): Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished with both side 1 mm thick VNR laminate as approved sample, Hardware system as per approved make & Sample (Hinges, cylindrical lock, Door stopper ). work complete including Glass slit , all type of hardware, fittings , fixtures as per instruction of Client/ Architect etc complete as per detailed drawings and specifications. sample mock shall be approved from Architect/Client. Equivalent to VNR Series Laminate. Basic rate of VNR Laminate is 45 Sq.ft
11
1
11
... More
Single Leaf Flush Door with glass view panel and finish with laminate : Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished with both side 1 mm thick VNR laminate as approved sample ,with glass view panel, 8mm thick toughened Milky glass view panel, Hardware system as per approved make & sample (door closer, cylidrical lock, Door handle ,lock , Door stopper). work complete including all type of hardware, fittings , fixtures ,as per instruction of Client/ Architect etc complete as per detailed drawings and specifications. sample mock shall be approved from Architect/Client. Equivalent to VNR Series Laminate. Basic rate of VNR Laminate is 45 Sq.ft
4
1
4
... More
Thin Profile Double leaf glass door : Supply & Installation of Modular Aluminium Glass door frame of Kubik or equivalent make 45mm System, Using KOPS 001 & KOPS DF 103 ( 45mm x 25mm) for Glass door frame
Doorframe Dimension – 45mm x 25mm. Finish – SILVER finish / Powder coating as per approved sample by Architect 10mm thk. clear thoughened Glass KUBIK Glass Hinge, HAFELE Open Door closer with saddel plate, KUBIK Mortise lock with handle, KUBIK Door stoper
Item includes all necessary fitting / fixing, fixtures of approved make complete as per specification, drawing, approval and instructions of the Architect/Client. Rate shall be inclusive of all material loading unloading at all height and all floor. Sample mock shall be approved from Architect/Client.
8
1
8
... More
Thin Profile Single leaf Glass Door: Supply & Installation of Modular Aluminium Glass door frame of Kubik or equivalent make 45mm System, Using KOPS 001 & KOPS DF 103 ( 45mm x 25mm) for Glass door frame
Doorframe Dimension – 45mm x 25mm. Finish – SILVER finish / Powder coating as per approved sample by Architect 10mm thk. clear thoughened Glass KUBIK Glass Hinge , HAFELE Open Door closer with saddel plate , KUBIK Mortise lock with handle , KUBIK Door stoper
Item includes all necessary fitting / fixing, fixtures of approved make complete as per specification, drawing, approval and instructions of the Architect/Client. Rate shall be inclusive of all material loading unloading at all height and all floor. Sample mock shall be approved from Architect/Client.
11
1
11
... More
Thin Profile Glass Partition : Providing & Fixing of STL45 ie.Single glazed modular system consist of Aluminium section of 25*45*2.5 mm thick. All sections duly anodise/powder coated with 6063-T6 grade and required accessories ie glass to glass aluminium I sections, T section & 90 degree sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 45 mm wide with 10mm toughen glass as per approved make & insertion of Thermoplastic gasket to adhere the glass firm & airtight.The sound reduction Value is from 32 to 35 Db.With 6 mm Groove inbuilt in system to accomodate the carpet & the uneven surfaces.
Accessories/Hardware: neutral cure glazed & metal silicon sealant of approved make on the periphery of the glass & wood etc.
Partition ht will be measured from finish floor to false ceiling level only. The rate shall be in sq.mt for all floors and at all heights including all costs. Glass width size shall be as per sugestion by EIC. Work complete including all type of material, fittings , fixtures,Finish, safety measures , loading , unloading , transporation, all leads ,accessories, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings ,specifications & instruction of Client/EIC.
83
1
83
... More
Frosted sparkling glass film (Colour film) : Providing and fixing frosted glass film of approved make Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by manufacturer. Rate shall be inclusive plotter cutting design as per Architect/Client suggestion. Contractor shall provide shop drawing for approval of Architect/Client.work complete incuding all type of tools, tackles, scaffolding etc complete as per suggestion of Architect/Client. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractor shall do a sample mock of 5 Sqm minimum of glass film), shall be approved from Architect/Client.
53
1
53
... More
Sliding window with mosquito shutter: (Domal 27 mm series) Supply & Fixing of Aluminium sliding window with powder coated as per by approved make & sample by architect/EIC.
Shutter section : 65 x 27 x 1.4 mm Glass : 5 mm thick tinted grey toughened glass of saint gobain or approved make list including concealed lock, albose , other necessary fixtures and fastening , PVDF rollers , EPDN gasket, silicon sealent etc. complete as per detailed drawings, mock sample and specifications.
21
1
21
... More
Ventilation with provision of Exhaust fan : Supply & Fixing of Ventilation with exhaust fan with powder coated as per by approved make & sample by architect/EIC.
section: Domal 27 mm series Glass : 5 mm thick Forsted fix toughened glass of saint gobain or approved make list including necessary fixtures and fastening , EPDN gasket, silicon sealent etc. complete as per detailed drawings, mock sample and specifications.
4
1
4
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
7
1
7
... More
Providing and fixing ball bearing for rolling shutters.
2
1
2
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
311
1
311
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
636
1
636
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
39
1
39
... More
EWC : Providing and fixing wash down water closet (European type W.C. pan) as per approved make of selection & shade with seat cover, P OR S Trap M.S. or G.I bracket , CP brass hinges and rubber buffers and Jointing the trap with soil pipe in cement mortar : 1:1 (1 cement : 1 fine sand) including cutting and making good the walls and floors where required with all labour and materials. All works to be carried out as per instructions and direction of Engineer-in-charge. Model Equivalent to Jaquar code CNS-WHT-963UFSM
17
1
17
... More
Flushing Tank: Providing and fixing Preumatic Flushing tank of as per approved make list . Work complete including all type of finishing. Model Equivalent to Jaquar code JCS-WHT-2400
17
1
17
... More
Flush Plate: Providing and fixing BEVEL FACE PLATE POLISHED CHROME of as per approved make list . Work complete including all type of finishing. Model Equivalent to Jaquar code JCP-CHR-152415 (CONTROL PLATE OPAL)
17
1
17
... More
Health faucet: Providing and fixing 12mm dia. Health faucet with 8 mm dia of as per approved make list with flexible pipe of 1.mt. length and holding stands complete. Work complete including all type of finishing. Model Equivalent to Jaquar code ALD-CHR-573
17
1
17
... More
Toilet Papers Holder: Providing and fixing Toilet papers holder of as per approved make list. Work complete including all type of finishing. Model Equivalent to Jaquar code ACN-CHR-1153S
17
1
17
... More
Two Way Bib Tap: Providing and fixing 15mm dia Two way Bib Cock of as per approved make list. Work complete including all type of finishing. Model Equivalent to Model Equivalent to Jaquar code ALD-CHR-5051N
17
1
17
... More
Wash Basin : Providing and fixing Wash Basin including fittings and waste pipe and fixing on wash basin counter by tile adhesive of approved make. Work complete including all type of finishing. Model Equivalent to Jaquar code CNS-WHT-705 (UNDER COUNTER BASIN WITH FIXING ACCESSORIES, SIZE: 605X430X200 MM, SHAPE: OVAL)
12
1
12
... More
Basin spout : Providing and fixing 15mm dia Basin spout of as per approved make list and work complete including all type of accessories. Model Equivalent to Jaquar code ARI-CHR- 39441K (EXPOSED PART KIT OF SINGLE CONCEALED STOP COCK CONSISTING OF OPERATING LEVER CARTRIDGE SLEEVE WALL FLANGE (WITH SEALS) & BASIN SPOUT (COMPATIBLE WITH ALD-441)) and + ALD-CHR-441 (CONCEALED BODY ONLY FOR SINGEL CONCEALED STOP COCK WTH BASIN SPOUT (WITHOUT EXPOSED PARTS))
12
1
12
... More
Angular Cock: Providing and fixing 15mm dia. Angular Cock as per approved make list and work complete including all type of accessories . Model equivalent to Jaquar code ARI-CHR-39053
12
1
12
... More
Soap Dispensor: Providing and fixing in position Soap Dispensor as per approved make list and work complete including all type of accessories. Model equivalent to JAQUAR - CAT- CAN-1135N
8
1
8
... More
Towel ring: Providing and fixing Towel ring of as per approved make of selection or as directed by EIC. Jaquar : ACN-1121N
8
1
8
... More
Handrayer : Providing and fixing in position of Handdrayer of as per approved make list. Work completed as per the instruction of EIC. Model Equivalent to Jaquar code HDF-SSF-AK2803D
6
1
6
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.: 15 mm nominal bore
18
1
18
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board : 510x1040 mm bowl depth 250 mm
1
1
1
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. with necessary coupling for wash basin & sink.
30
1
30
... More
Urinal : Providing and fixing in position of Urinal of as per approved make list. Work completed as per the instruction of EIC. Model Equivalent to Jaquar code URS-WHT-13253N (URINAL, BACK INLET, WITH FIXING ACCESSORIES, SIZE: 385X325X635 MM)
18
1
18
... More
URINAL FLUSH VALVE: Providing and fixing URINAL FLUSH VALVE of as per approved make of selection by architect. Model Equivalent to PRS-CHR-073 (AUTO CLOSING CONCEALED URINAL FLUSH VALVE WITH WALL FLANGE)
18
1
18
... More
Urinal Partition: Providing and fixing Artificial or natural stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
7
1
7
... More
Toilet Cubical : Model Type: Equivalent to Greenlam Sturdo Essentia Seren : Thickness of Compact Laminate : 12mm Nos 1 32075 32075 . Door : 600mm*1785mm , Divider Height : 1820mm , Overall height : 1995mm (Including 150mm Ground clearance) Supply & Installation of Toilet Cubicles as per approved make & sample by DTA . 12 mm Compact Grade 1.5 mm thick laminateBoard of the approved shade by DTA . Accessories for cubicles.1. Aluminum “U” Section with a) Aluminum U Channel b) Nylon Gravity hinges c) Nylon Coat Hook d) Nylon Adjustable Leg e) Nylon Door Knob f) Nylon Thumb Turm Indicator g) Aluminium Door Stopper Channel h) Aluminium Top Rail e) Screws, Wall Plugs & Noise Tape Etc. Work complete including all type of fittings, fixtures, tools, etc complete as per manufacturer specification and drawing.
15
1
15
... More
JC shutter: Supply & Installation of Cubicles with shutter as per as per Architect selection & approved make. 12 mm Compact Grade 1.5 mm thick laminateBoard of the approved shade by Architect. Accessories for cubicles.1. Aluminum “U” Section with SS Exterior grade Finish.2. Aluminum “H” Section with SS Exterior grade Finish.3. Aluminum Top Rail with SS Exterior grade Finish.4. SS Coat Hook ( SS 316 )5. SS Privacy Thumb Turn ( SS 316)6. SS Door Knob ( SS 316)7. SS Hinges ( SS 316)8. SS Adjustable Leg ( SS 316)With Rubber lining and Screw Etc. Work complete including all type of fittings, fixtures, tools, etc complete as per manufacturer specification and drawing.
6
1
6
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
1
10
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
8
1
8
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
14
1
14
... More
Pavilion Roofing: Design, supply, erection and Installation of PUF Insulated Pre- Fabricated Flush Paneling for wall and Roof (Inner Skin & Outer Skin GI Pre- Coated sheet) along with the bottom channel runners to hold these panels of Thickness of 80 mm modular panel as pre site requirement with Polyurethane Foam of density not less than 40 kg/m3 as insulating material, made up of pre - painted PPGI sheet both side (0.50 mm hickness) with polyster coat of 30 micron over a primre coat of 30 micron over a primer coat of 5 micron Silicone Sealed junctions.
Roof panel: 80mm thickness roof panel, 0.5mm PPGI sheet both side, Density: 40kg/m3, Supply width: 1060mm, Installation Accessory: 1). C-Channel (Size: 40*82*40) 0.5/0.8mm, 2). L-Inner (Size: 50*50) 0.5/0.8mm, 3). L-Outer (Size: 50*100) 0.5/0.8mm, 4). L-Outer (Size: 100*100) 0.5/0.8mm, 5). C-Side Cap (Size: 50*110*50) 0.5/0.8mm, 6). Self Tapping Screws With Metal Washer (Coroshield)
Size: 12 x 150mm (Screw), Size: 19mm (Aluminum Bonded Washer), 7). Silicon Sealet (Make :Maccoy Soudal) 1box = 24nos, 8). Anchor Fastner (Make: HILTI) Size: M8*75mm, 9). Puf Revet, 10). Butyal Tape, 11). Plain TOP Ridge (Size: 300*300mm), 12). Plain Bottom Ridge (Size: 250*250mm), 13). Gutter (Size: 50*200*250*310*300mm).,
including Installation all Material Supply, Installation, Including Freight, Loading-Unloading Charges. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc. complete as per drawings, specifications & instruction of Client/EIC.
Documents to be submitted: Installation & fabrication drawings, roof design analysis report, 3D Model, Stability certificate, Material Test Certificates.
909
1
909
... More
Fabricated work: Providing Fabrication & erection of steel structure as per drawings including materials, consisting of plates, rolled steel joists, channels, angles, chequered plates etc and also rectangular / square hollow steel sections, insert plates in RCC/Brickwork, anchor bolts for steel structure, sleeve pipes, anchor nuts, washers etc, straightening of raw steel if required, fabrication of steel structures with primer and minimum two coats of anti corrosive matt finish paint including preparation of supplementary sketches and detailed bill of materials supply of bolts, nuts, washers, shims, packs, putty. gas, welding electrodes and all other consumables, as required and carrying out surface preparation all complete. The scope includes loading, transportation ,unloading and delivery and erection site of all fabricated structures,, alignment and welding of all structures true to line, level, plumb and dimension, including rectification if any, splicing, site assembly all as per technical specifications and drawings,all complete. Contactor shall provide stability certificate for the fabrication structure. Rate inclusive of shop drawing.
30982
1
30982
... More
Alluminium Perforation sheet facade : Providing Fabrication & erection of 2 mm thick Exterior grade pure Alluminium sheet with perforation & as per reference image given by Architect. The work includig necessary Alluminium fittings/ framing, fixtures, accessories, cutting , engraving etc complete. The scope includes Scaffolding , loading, transportation ,unloading and delivery and erection site of all fabricated structures,, alignment and welding of all structures true to line, level, plumb and dimension . sample mock shall be approved from Architect/EIC. Shop drawing shall be provided by Contractor.
76
1
76
... More
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m : All kinds of soil
1282
1
1282
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
1200
1
1200
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
64
1
64
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
128
1
128
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
1273
1
1273
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
9
1
9
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling with all lead and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
5000
1
5000
... More
Supplying and stacking of good earth at site. work complete including royalty, all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, all heights, all levels, all lead & all lift etc complete as per instruction of Architect/EIC. (earth measured in stacks will be reduced by 20% for payment).
2500
1
2500
... More
Supplying and stacking at site dump manure from approved source, work complete including royalty, all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, all heights, all levels, all lead & all lift etc complete as per instruction of Architect/EIC. (manure measured in stacks will be reduced by 8% for payment) :
1000
1
1000
... More
Rough dressing the trenched ground including breaking clods. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, all heights, all levels, all lead & all lift etc complete as per instruction of Architect/EIC.
5000
1
5000
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation
5000
1
5000
... More
Fine dressing of the ground.
7000
1
7000
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
5000
1
5000
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
5000
1
5000
... More
Grassing with selection No. 1 truf grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed . With grass Turf
10000
1
10000
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
100
1
100
... More
Shrubs:-Providing and planting the saplings of shrubs as per approved varieties sample by Architect. complete as per detail specification.Work complete including all labour, tools, tackles, maintenance with 30 days or more till the shrubs forms a thick etc
50
1
50
... More
Trees :-Providing and planting the saplings of trees of approved varieties by Architect. complete as per detailed specification. .Work complete including all labour , tools , tackles , maintenance with 30 days or more till the tree forms a thick etc
10
1
10
... More
Bottle Palm :-Providing and planting the saplings of Palm tree of approved varieties by Architect. complete as per detailed specification. .Work complete including all labour , tools , tackles , maintenance with 30 days or more till the Palm tree forms a thick etc
25
1
25
... More
Abstract for Interior Works
-
-
-
... More
Gypsum Ceiling: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
415
1
415
... More
Overall Toilets - Calcium silicate grid ceiling : Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.
39
1
39
... More
Mettalium Wooden Plank Ceiling: Supplying and Installing of METALIUMTM make U- Shaped Screen 50*50*50mm (50mm gap) open false ceiling system.
Panel (Galvanized Steel): Metalium make square edge P-50 series panels, 50 mm wide x 50 mm deep & 0.50 mm TCT Galvanized Steel as per IS-513. Panel length is up to approx. 3 mtr. Panel shall be coil / powder coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for U Shaped Screen Panel.
Paint Detail: Coil coated panel shall be chromatized for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (Inner side) with a primer coating and skin coat on continuous paint line or Powder coated panel shall be 50 microns thick on exposed surface.
P-50 Carrier: Carrier shall be 20mm wide at bottom and 39 mm deep with cutouts to hold the panel in a module of 100 mm, carrier shall be roll formed out of 0.60 mm Galvanized steel and cut to a standard length of 2.4 mtr. When two or more carriers are to be joined, they shall be joined together by means of carrier coupler which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 100mm centre to centre.
Installation detail: The carrier shall be suspended from slab/truss by 4mm dia galvanized rod & height adjustment powder coated spring steel clips at maximum 1.2 to 1.5 meter Centre to centre. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts.
Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, all accessorie , Scaffolding etc as described in item description. Work complete as per the detailed drawing , mockup sample and instruction of Architect/Client.
458
1
458
... More
Profile Mirror with LED Light: Providing and fixing Profile mirror with LED Light as required shape, as per approved make & sample. Size : 800mmx1500mm
Glass: 5 mm thick mirror
Frame : Aluminum frame of size 40mm x 9mm, Brush gold finish
Rate shall inclusive all type of material, fittings, fixtures, LED light, if required ply frame/paking, Finish, loading, unloading, transportation, all leads, accessories, groove, adhesive, tape, headless nails, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications & instruction of Client/EIC. sample mock shall be approved from Architect/Client.
6
1
6
... More
Reception Table: @ 1800 x 675 x 1050 mm
Providing and fixing Reception table unit consist main table with pedestal unit with all necessary accessories keyboard, CPU stand , cable manager, etc with all required necessary accessories.
Inside: 19mm thick plywood finish with 0.8mm thick Linear laminate. Basic rate of Laminate is 500 per sheet. Working Desk Top: 19mm thick plywood finish with 1 mm thick laminate. Basic rate of Laminate is 1300 per sheet. Table front: 19mm thick plywood finish with 1 mm thick laminate, backlit and logo engarving work complete as per detail drawing.
Verticle support: As per detail drawing and reference image 19mm thick plywood finish with 1 mm thick laminate
providing and fixing as per requirement of socket and quantity Pop up tabletop electrical WIRE MANAGEMENT BOX SS finish and 3nos. of drawers as per drawing. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, adhesives consumable hardware & required SS 304 grade hardware/accessories, grooves pvc edge banding, etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this.
4
1
4
... More
Sofa : Three seater
Comprising from Solid teak wood with PU semi gloss finished polish. The seat shall 150mm th 40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU semi gloss finish polish.The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this.Rate shall inclusive of providing mockup sample for approval of architect. Basic rate of fabric 1000/ Rmt
6
1
6
... More
Sofa : Two seater
Comprising from Solid teak wood with PU semi gloss finished polish. The seat shall 150mm th 40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU semi gloss finish polish.The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this.Rate shall inclusive of providing mockup sample for approval of architect. Basic rate of fabric 1000/ Rmt
4
1
4
... More
Sofa : One seater
Comprising from Solid teak wood with PU semi gloss finished polish. The seat shall 150mm th 40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU semi gloss finish polish.The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this.Rate shall inclusive of providing mockup sample for approval of architect. Basic rate of fabric 1000/ Rmt
6
1
6
... More
Center Table: size of bigger table-2'6" Dia and smaller table-2' Dia, Location: Waiting area, VIP lounge, Refree room Providing & Fixing of CENTER TABLE SET as per detail drawings.
Top : 15mm thick solidwood and colour HDF with PU polish
Base : Vertical support of Metal legs with powder coating
Finish : Powdercoating on Metal frame
Size of bigger table-2'6" Dia.
Size of smaller table-2' Dia
Work complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
2
1
2
... More
Corner Table: Size-1'6" Dia, Location: Waiting area, VIP lounge, Refree room " ------------------Do------------------" as per above specification for complete work.
18
1
18
... More
TV unit: 2800 x 400 x 300 mm, Location: VIP lounge, Refree room Providing and fixing TV ledge unit comprising from MR grade ply with 1 mm thick VNR laminate finish as per approved sample. TV unit consisting 2nos. of Drawer & 1nos. niche.
Work complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
10
1
10
... More
Changing room Lockers : Supplying and Installing in position of 1 Locker Unit size: 750 W x 600D x 2100H as per approved make. 2 shutters storage, 2 open shelve, 1 drawer & 1 open box seating in each unit made out of plywood finish with 1mm thick VNR laminte for Carcass & Shelves Each compartment has an individual locking mechanism pre-fitted to it. 1 Drawer unit below seating of size 750X600X300mm, Shutter storage above seating of size 375x387x300mm & 750x387x300mm, Open shelves over seating of size 750x350x300mm made out of plywood finish with 1mm thick VNR laminte with open hangers storage for cloths at Back of seating.
Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.
1
1
1
... More
Wooden bench: 1500X450X450MM.
Providing and fixing Wooden bench finish with PU polish as approved sample.
Base: Metal frame leg.
Finish: Powder coating on metal frame leg as approved. Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.
1
1
1
... More
Examination bed: 1830mm X 560mm X 810mm
Providing and fixing Examination bed as approved sample.
Finish : 22 guage CRCA sheet with epoxy powder coated to approved finish.
Bed top in upholstered and covered with washable plastic material.
4nos.of drawers and 2nos. of cabinet with separate door in 20guege CRCA sheet at bottom and step stool.
Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.
1
1
1
... More
Petient bed: 2000mm X 925mm X 600mm
Providing and fixing Petient bed as approved sample.
Finish : CRCA sheet with epoxy powder coated to approved finish.
Bed top with 18 guege CRC pipe & frame with 18guege 60x30mm with foam finish mattress with rexin cover. Legs : 31mm dia. & 18 guege CRC pipe.
Bows : 31mm dia & 18 GUege SS pipe. also includes IV stand.
Backrest includes a system of manual lift through a handle.
Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.
2
1
2
... More
Doctor room table unit: Table top : 1500 x 750 x 750 mm, Side Unit : 1050 x 450x 650 mm, Pedestal Unit-400x420X650.
Providing and fixing table unit consist main table, side table, with pedestal unit with all necessary accessories keyboard, CPU stand ,cable manager, modesty panel etc with all required necessary accessories. All finishes laminate, powder coating shall be approved by architect. Rate shall inclusive of mock up sample providing and fixing at site of unit for approval of architect.
Table top : 25mm thick Pre-laminated with reverse waterfall profile at users side with edge band as per approved shade. 25mm thick pre-laminated gable end with edge banding. Modesty panel of MS with powder coated as per approved make and sample by Architect/ Client. Side unit: 25mm thick Pre-laminated as per approved shade. Verticle support (Leg): MS strip (Accent) support with powder coated. Horizontal Support: MS support with powder coated. Wire management: Raceway : 0.8 mm thick CRCA horizontal and vertical raceways with metal separator .one way or two way openable flip top box mounted on table top squezze :A special flexible rubber component that allows easy and safe passage of wires. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The pedestal unit consists of 1 box drawer and 2 file drawer. The drawer box is fitted with telescopic channel Hettich or Haffle make for free movement. The drawer unit is provided with central locking system, where in the drawer are locked with one key.SS 304 recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing, mockup sample and instruction of Architect/Client. Equivalent to VNR Series Laminate.
2
1
2
... More
Revolving chair : Location: Doctor room, Admin area
Model equivalent to Mid Back Evo 02 : High Back Revolving Chair as per approved make list.
Chair With frame in MS, PU foam in back & Moulded PU Seat, Chrome Arms with PU cladding & Synchro Mechanism, Chrome base & Gas Lift.
Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
3
1
3
... More
Revolving chair : Location: Doctor room, Workstation, Visitors, Cubical head Model equivalent to Low Back Evo 02 : High Back Revolving Chair as per approved make list.
Chair With frame in MS, PU foam in back & Moulded PU Seat, Chrome Arms with PU cladding & Synchro Mechanism, Chrome base & Gas Lift.
Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
1
1
1
... More
Teacher table: Size 1500mm X 600mm X 750mm
Model no.: Silence 03 Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
2
1
2
... More
Teacher chair:
Model no.: Evo 03 : Medium Back Chair
Back Frame in Moulded Nylon & PP, PU moulded Cushion on Seat,
Back Lumber Support, Nylon Mesh in Back with Fix Arms & frame in 22mm dia Pipe in Stainless Steel.
Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
7
1
7
... More
Study table with seating, Location: Classroom
Size: 1100mmX400mmX750mm
Table top: 25mm thick BSL with all side edge banding with PP pencil tray inserted.
Seat with back supports & Attached Bottle Hook
Support: MS 40x20mm oval pipe with book rack below duly powder coated. Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
11
1
11
... More
Admin Cabin Furniture: size of desk: 1800x900x750mm, Side unit size: 1050x450x650mm, Back side storage unit size: 2575x450x650mm
Providing and fixing table unit consist main table with pedestal unit with all necessary accessories, keyboard, CPU stand, cable manager, modesty panel etc.
Main Table Top: 35 mm thick top comprising from IS 303 BWR ply with Laminate finish , MS framing work as per approved sample and make by Architect. Modesty panel : Comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Vertical support: 50 mm thick vertical support with MS powder coated, necessary Framing as per detailed drawing.
Pedestal unit(size 400x420X650): Pedestal comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Work including require nos of drawer, all type of fittings, fixtures, SS 304 grade conceal profile handle, hardware as per approved make. Wire management: one way or two way open able flip top box mounted on table top squeeze: A special flexible rubber component that allows easy and safe passage of wires. Back side storage unit: Comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate with openble shutter The work shall be done as per the detailed drawing, specifications, sample approved and as directed by the Architect/Client. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing, mockup sample and instruction of Architect/Client. Equivalent to VNR Series Laminate.
156
1
156
... More
Cubical Furniture: size of desk: 1500x750x750mm, Side unit size: 1050x450x650mm
Providing and fixing table unit consist main table with pedestal unit with all necessary accessories, keyboard, CPU stand, cable manager, modesty panel etc.
Main Table Top: 35 mm thick top comprising from IS 303 BWR ply with Laminate finish, MS framing work as per approved sample and make by Architect. Modesty panel : Comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Vertical support: 50 mm thick vertical support with MS powder coated, necessary Framing as per detailed drawing.
Pedestal unit(size 400x420X650): Pedestal comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Work including require nos of drawer, all type of fittings, fixtures, SS 304 grade conceal profile handle, hardware as per approved make. Wire management: one way or two way open able flip top box mounted on table top squeeze: A special flexible rubber component that allows easy and safe passage of wires. The work shall be done as per the detailed drawing, specifications, sample approved and as directed by the Architect/Client. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing, mockup sample and instruction of Architect/Client. Equivalent to VNR Series Laminate.
12
1
12
... More
Low height storage: Size : 1500mm X 400mm X 1275mm
Storage unit top made up of 25mm thick exterior grade Prelaminated partical board (PLPB) table top with 1mm thick approved laminate. The top has a post formation round edge finish with both side laminate. Storage body is made of 18mm thick MDF top with exterior grade finish with both side 1 mm thk. laminate . Shutter finish with both side 1 mm th laminate. The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. Having premium lock with wave key technology and side and hinged shutters are sealed with 2mm thick PVC edge banding.SS 304 recessed handles are provided for easy opening and closing of shutter. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Enox/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. As approval of EIC. All the work complete as per the detailed drawing, mockup sample and instruction of Architect/EIC. Work complete as per the instruction of EIC.
2
1
2
... More
Workstation - Size: 1200 x 600 x 750mm : Providing and fixing Workstation as per concept layout provided by Architect. Client. Table Top : 25mm thick exterior grade Prelaminated partical board (PLPB) table top with PVC edge bedding. Race way: Below table horizontal & vertical metal raceway with powder coated.
Modesty: Made in Prelaminated partical board (PLPB) with PVC edge bedding, metal leg support with powder coated.
Glass Divider : Lacquered glass with 300 mm height above table top Cost to include that for fixing to the partition with necessary brackets, cleats etc. Cost also to include that for 1 no. MS ivory / matching to top powder coated wire manager per work station complete as per drawings & direction with necessary gable end.Leg Panel/ Gable end:Powder coated Metal leg as per selection of Architect/Client. Work complete as per drawing & direction complete with all standard fittings & fixtures, keyboard, cpu stand, levelling screws etc. Proper fixing arrangement to floor/tiles for partition. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, and all accessories as described in item description. Rate inclusive of all necessary adjustment as per site requirement by filled top and vertical support partition or any necessary required accessories.
10
1
10
... More
Pedestal Unit: @400x420X650
Comprising from of 25mm thick exterior grade Prelaminated partical board ( PLPB) table top with PVC edge bedding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 2 file drawer. The sides of Inside drawer box are of PLPB. The drawer box is fitted with telescopic chanel hettich or haffle make for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.SS 304 recessed handles are provided for easy opening and closing of drawer.The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client.
3
1
3
... More
PLUMBING WORK
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction
of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes
180
1
180
... More
20 mm nominal dia Pipes
20
1
20
... More
25 mm nominal dia Pipes
120
1
120
... More
32 mm nominal dia Pipes
50
1
50
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge. Internal work - Exposed on wall.32 mm nominal dia Pipes
5
1
5
... More
40 mm nominal dia Pipes
40
1
40
... More
50 mm nominal dia Pipes
40
1
40
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore
1
1
1
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
5
1
5
... More
100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet
21
1
21
... More
100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet
4
1
4
... More
S.C.I. gully or nahani grating 100 mm dia
25
1
25
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 40mm dia
100
1
100
... More
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm
200
1
200
... More
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm
100
1
100
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 75 mm dia
20
1
20
... More
100 mm dia
50
1
50
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 50 mm nominal dia Pipes
30
1
30
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 65 mm nominal dia Pipes
100
1
100
... More
80 mm nominal dia Pipes
5
1
5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
1
1
1
... More
65 mm nominal bore
1
1
1
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10
graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
5
1
5
... More
HYDRO PNEUMATIC SYSTEM FOR DOMESTIC WATER DISTRIBUTION
Variable Speed Hydro-booster System : Compact self contained Hydro-booster system comprising of following : In-line, vertical multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head TEFC motor (with mechanical seal) Vendor to submit performance curves and technical catalogue of the proposed model for review and information. The job shall include required size of Foot valve, Inlet Pipe, Outlet Pipe, Y Strainer, NRV, Inlet & Outlet Valves, Main Header Header, Pressure Valve, and all required accessories to complete the job.
Panel mounted PLC based multi pump controller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a single body or as separate components with pressure sensor transmitter, IP 55 enclosure, diodes to indicate pump ready, pump running and fault condition. Each incomer and Outgoing feeder should be capable for protection against Overload, Short Circuit and Phase reversal condition. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. Indication of all type of faults / on-off status. Electronic type low water level controller with LED panel to operate pump (necessary contacts along with minimum one PLC operated spare contacts required), with probe & all control wiring from Panel to tank to operate the system automatic/manual & shall prevent the pump from dry running.
Scope shall also include power and control cable of required size, termination, cable tray from Pump to Control panel etc. complete the job.
Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be as per manufacturer recommendation).
Set of accessories such as GI headers of suction and discharge for (working and stand by pump assembly), control valves, non return valves, pressure switches, pressure transducers, pressure gauge etc. complete the job.
A. Domestic Water Supply Distribution PUMP:
Capacity per pump - 150 LPM
1 Set = 1 Nos. Pump (1 Working + 1 Standby - cascade operation)
Total Capacity of System: 300 LPM
Head - 40 mt
Location - Pump Room
Suction head - Negative Suction
1
1
1
... More
B. RAIN WATER SUMP PUMP
Capacity per pump - 200 LPM
1 Set = 1 Nos. Pump (1 Working + 1 Standby - cascade operation)
Total Capacity of System: 400 LPM
Head - 20 mt
Location - Pump Room
Suction head - Submerssible type
1
1
1
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 100 mm dia
10
1
10
... More
75 mm dia
10
1
10
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 100mm
10
1
10
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 150mm
50
1
50
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 200mm
100
1
100
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 250mm
50
1
50
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up tohaunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe
10
1
10
... More
150 mm diameter S.W. pipe
50
1
50
... More
200 mm diameter S.W. pipe
100
1
100
... More
250 mm diameter S.W. pipe
50
1
50
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
1
5
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
1
4
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
1
2
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
1
1
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
1
1
... More
Construction of septic Tank in all types of soil with 5 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Required size of 2mtr x 2.0 mtr x 2 mtr deep for 5 visitors or As per Architectural Drawings.
1
1
1
... More
(B) Providing sock pit of 10.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton)
1
1
1
... More
ELECTRICAL WORK
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
150
1
150
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
100
1
100
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
10
1
10
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
300
1
300
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2000
1
2000
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
600
1
600
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
300
1
300
... More
32 mm
20
1
20
... More
5/6 amps switch
300
1
300
... More
15/16 A switch
15
1
15
... More
3 pin 5/6 A socket outlet
30
1
30
... More
6 pin 15/16 A socket outlet
15
1
15
... More
Telephone socket outlet
10
1
10
... More
Bell push
1
1
1
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
10
1
10
... More
3 Module (100mmX75mm)
40
1
40
... More
4 Module (125mmX75mm)
20
1
20
... More
6 Module (200mmX75mm)
20
1
20
... More
8 Module (125mmX125mm)
10
1
10
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module
10
1
10
... More
3 Module
40
1
40
... More
4 Module
20
1
20
... More
6 Module
20
1
20
... More
8 Module
10
1
10
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
1
10
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
10
1
10
... More
Installing of Exhaust Fan in existing opening, including and making good the connection, damage connection, testing commissioning etc as required. upto 450mm sweep
4
1
4
... More
Extra for fitting of Lowers/shutters complete with frame for exhaust fan of all size.
4
1
4
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
3000
1
3000
... More
Providing and fixing following rating and breaking capaity and pole MCCB with thermomagnetic release and terminal spreaders in exiting cubicle panel board including drilling holes in cubical panel, making connections, etc. as required. 100 A, 30KA, FPMCCB
2
1
2
... More
200 A, 36KA, FPMCCB
1
1
1
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way (4 + 24), Double door
1
1
1
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
24
1
24
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
4
1
4
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
4
1
4
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
6
1
6
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
3
1
3
... More
Supplying and erecting approved make panel mounting type Multifunction Meter 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc
1
1
1
... More
Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with insulating materials connected to the meter
3
1
3
... More
Supplying and erecting approved make suitable panel indicator lamps of LED type lamp, lens cover, Bakelite holder complete erected with necessary connections.
10
1
10
... More
Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size. (A) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory as per IEC 61439 for beneficial use. (i) with 350mm depth
5
1
5
... More
Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.
200
1
200
... More
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections. (B) Suitable for 200 Amp. Capacity
5
1
5
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
20
1
20
... More
300 mm width X 50 mm depth X 1.6 mm thickness
20
1
20
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
2
1
2
... More
300 mm width X 50 mm depth X 1.6 mm thickness
2
1
2
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
2
1
2
... More
300 mm width X 50 mm depth X 1.6 mm thickness
2
1
2
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
1
4
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
50
1
50
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)
2
1
2
... More
Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm
8
1
8
... More
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)
400
1
400
... More
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (d) 4 core 16 Sq. mm
40
1
40
... More
(e) 4 core 25 Sq. mm
500
1
500
... More
(C) 4 core 35 Sq. mm
100
1
100
... More
"Supply Installation Testing Commisioning of Indoor deep Recessed Round downlight 18-21W Recess Mounted Round backlit downlighter with below features 1. Pressure die cast Aluminum alloy housing for better thermal conductivity. 2. PS diffuser for optimum light transmission. Round Version.
3. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 5700K, 4000K & 3000K CCT.
4. CRI>80, High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD 5. LED life of more then 35000 Hrs @ L70. Approved makes : Philips,Havells,Lighting technolgies, Wipro,Tisva
81
1
81
... More
Supply Installation Testing Commisioning of Indoor Office Lighting 7-9w Recess Mounted Tiltable Spotlight downlighter with below features
1.Pressure die cast Aluminum alloy housing for better thermal conductivity. 2. With COb with Lens of 36-40 degree
3. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 5700K, 4000K & 3000K CCT.
4. CRI>80, High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD 5. LED life of more then 35000 Hrs @ L70. Approved makes : Philips,Havells,Lighting technolgies, Wipro,Tis
30
1
30
... More
Supplying and erecting LED indoor fittings with Integral, SMD LED, 40 W, IP65, 40W BATTEN LIGHT Surface t mounted totally enclosed LED luminaire with System efficacy of more than 100 lm/W (4000 lumens). LED luminaire shall be made up of Sturdy vandal resistant polycarbonate body with polyurethane gasket. The luminaire shall have LED grade UV stabilized polycarbonate diffuser. The luminaire shall have Sturdy polycarbonate clips for fixing diffuser to housing. The luminaire shall have Waterproof cable gland ensuring good ingress protection. LM 80-08 compliant LEDs from reputed makes such as Nichia, Japan / Cree, USA / Bridgelux, USA / Lumiled USA / Citizen Japan / Everlite Taiwan / Osram Germany should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be CRCA constructed, Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012
Ref : Philips make : Essential Smartbright IP65 Batten 40w
Approved makes : Philips,Havells,Lighting technolgies, Wipro,Tisva
35
1
35
... More
Supply Installation Testing Commisioning of of IP66 14-15 watt per metre Flexible LEd strip with Aluminium housing and required accessaries with Following specifications . ( quantity in metre)
1. Led strip should be IP66 rating and above .
2. Provided with proper Aluminium profile for mounting led strip.
3. Should work on DC current 24V only.
4. Provided with Led driver which should be minimum IP54 rated.
5. Fixture should be warrantied for 3yrs for 50,000 hrs @ L70
6. The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004 Company
7. Have their own driver Manufacturing Facility.
8. Have their own NABL accredited lab
Approved Make.: WIPRO/TISVA/HAVELLS/LIGHTING TECHNOLOGIES/PHILIPS
70
1
70
... More
Supply Installation Testing Commisioning of Indoor RECESS mounted COB type cylinder Light 25W-30w Surface Mounted COB Spotlight downlighter with below features
Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. PS diffuser for optimum light transmission. Efficacy of Fixture above 95 Lumens /watt
Available with 5700K, 4000K & 3000K CCT. CRI>80
High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD. Tiltable. LED life of 50000 Hrs @ L70. IP20 Protection
Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . (Approved Led source Nichia , Cree, Lumileds , Osram Only)
PF >=0.95 and THD <=5 % (Certificate need to be submitted from NABL Accredited lab)
The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004 Company
The manufacturer should have their own driver Manufacturing Facility.
The manufacturer should have their own NABL accredited lab
Equivalent to LIghting Technologies Intenso Min 15w.
Approved Make.: WIPRO/TISVA/HAVELLS/LIGHTING TECHNOLOGIES/PHILIPS
70
1
70
... More
"Supplying, Installation, testing & erecting of High endIP67 Outdoor recess ground ROUND 30W LED Medium distribution round uplight with internal louvers & recessing box, 3000K,220V AC,CRI >80,30 degree,Integral LED Control Gear,Internal louvers + Recessing box"
1. Housing made of ss & pressure die cast aluminium alloy with corrosion resistance powder coating, + PC housing for fixing in stone .
2. Min IP I67 to ensure fixture is water and dust tight .
3. External separate Silicon encapsulated mettalic isolated driver for ensuring better reliability and safety. 10KV/5KVA external surge arrestor.
4. Fixture should be warrantied for 5 yrs for 50,000 hrs @ L70 5. The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . (Approved Led source Nichia , Cree, Lumileds , Osram Only)
6. PF >=0.95 and THD <=15 % (Certificate need to be submitted from NABL Accredited lab) Selection of colour / colour temp. / throw of light will be decided by architect. Approved Make.: WIPRO/TISVA/HAVELLS/LIGHTING TECHNOLOGIES/PHILIPS"
8
1
8
... More
Supply, installation, testing and commissioning of Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge. Jack for Computer Open RJ-45 CAT III.
2
1
2
... More
Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design shanks , canopy erected with earthing. [ Make shall be approved by Engineer in Charge]
12
1
12
... More
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.
12
1
12
... More
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation without leakage and earthing.
12
1
12
... More
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.
12
1
12
... More
Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with necessary core cutting. (2)For 4/5 Star Rating of current year. (C) for 1.7 to 2 ton capacity-Premium Cat.
2
1
2
... More
Supplying & installing MS standard type stand mounting for outdoor unit of Split A.C. upto 4 TR capacity erected with necessary hardware materials as directed.
2
1
2
... More
Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity
20
1
20
... More
High Mast 20 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. - 2, Bottom Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate -dia.580 mm x 20 mm thick, Foundation Bolt Size M27 x 850mm , Qty - 10 Nos., Suitable for mounting Fitting of Light - 12 Nos.
4
1
4
... More
SITC OF Sports Flood light luminaire with system power 640w [640W ± 5%], Available in Cool White color temperature (5700K ± 355K), made of a single piece Pressure die cast aluminium (PDC) housing with separate driver and optical compartment for Thermal isolation & Powder coated by Corrosion resistant Nano coating technology. The fixture is provided with a injection moulded UV stabilized Polycarbonate cover & Lens optics with beam angle options of 10°, 30°,60° & 100° beam angle for optimum light spread.
Integral encapsulated high efficiency electronic driver having a Aluminium extrusion construction with rated voltage of 140-270V, power factor > 0.95, THD < 5%, IP66 protection, Inbuilt surge protection of 5 KV, has mis wiring, Over voltage, Short circuit, Reverse Polarity protection, Input over Voltage cut-off at 320V with Auto Recovery feature. Also upgraded with integrated IP67 protected SPD of 10KV/5KA surge protection & Line-Line 440VAC Withstand capacity up to 4Hrs.
Luminaire has a Ingress protection of IP66 and Impact Resistance of IK08.
The luminaire lumen output > 135 LPW & system efficacy of >27800 Lm , CRI of 70 . The LEDs used have a life of 50000 burning hrs Lumen maintenance as per L70.
Suitable for Cradle mount application.
Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015
IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab.
Certification: CE Certified, ROHS compliant, BIS Certification for Luminaires & Drivers
Lighting Technologies : Firmus 640w ( no of Modules and beam angle can be adjusted as per site situation)
Or Equivalent in Osram-Traxon or Philips-Color Kinectics
44
1
44
... More
Supplying, Design, erecting, testing, commissioning approved make Hot dip galvanised studium High Mast
Pole of 20 mtr with head frame,motorised trolley pole with 10-15 Each of light fitting facility including
light fixtures installation as per following general specification. having following general Specification. (a)
Section fabricated from G.I Plate confirms BSEN 10025 & Hot deep galvanised minimum 65/86 micron (as
per IS 01461).(b) Maximum telescopic section not more than four (10.5,7.4, 1.0 mtr with overlaping in
sequence is 1, 0.9 or 0.5 mtr) (c) Double drum gear pipe motorised winch with 6mm dia S.S. Rod (For 16
mtr and above size)(d) Approved make L.E.D. aviation light = 1 No. Lighting arrestor = 1 No. with
necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured. (e) Bottom most section suitable for
mounting reversible motor and switchgears having door not more than 1400mm x 300mm with
waterproof gasket & hinges & locking arrangement.
(f) Pole structure comprises suitable size of reversible motor, cable and necessary switchgears. (g)
bottom section shall have suitable size of thickness supports ribs foundation bolts nuts etc.(h) Item not
comprises the cost of lanterns.(i) Necessary Cement Concrete foundation as per IS including testing &
commissioning of the entire structure for following size of High Mast poles [CAT.II] [A] High Mast 30
Mtr. With Head Frame, TOP A/F 490 MM, BOTTOM A/F 1090 MM, Sec. No. , Bottom Thickness -8 mm,
Middle Base Sec mm - 6, Top Sec. - 5 mm, Round Size Base Plate - 1310 Dia x 35 MM, Foundation Bolt
Size M32 x 1500, Qty - 20 Nos- 36mm Dia., Dia. may vary ± 5 % , Suitable for mounting Fitting of Light - 10-15 Nos.
4
1
4
... More
"Supplying, Installation, testing & erecting of High end 20W Spike Light with Following specifications .
1. Housing made of pressure die cast aluminium alloy with corrosion resistance powder coating. Should have both the option of spike as well as fixed base stand for surface mounted option.
2. Specially formulated UV Stabilised Injection molded PC diffuser for high Caliber light transmission, Minimal Glare and Maximum Output.
3. Min IP I66 to ensure fixture is water and dust tight .
4. External separate Silicon encapsulated mettalic isolated driver for ensuring better reliability and safety. 10KV/5KVA external surge arrestor.
6. Fixture should be warrantied for 5 yrs for 50,000 hrs @ L70 7. The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported. (Approved Led source Nichia, Cree, Lumileds, Osram Only)
8. PF >=0.95 and THD <=15 % (Certificate need to be submitted from NABL Accredited lab)
9. The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004 Company
10. Have their own driver Manufacturing Facility.
11. Have their own NABL accredited lab
12. Fixture should be offered in ebony black color. Light Colors 5700 deg K, 4000 deg K, 3000 deg K, light beam angles, 10 deg, 30 deg and 40 deg.
Lighting Technologies : Projector Mid 20W Mono Color, Or Equivalent in Osram-Traxon or Philips-Color Kinectics
5
1
5
... More
Supplying, Installation, testing & erecting of High end Linear Wall Washer 40w 1.2m with Following specifications .(3000/4000/5700k deg )
1. Housing made of pressure extruded aluminium housing with corrosion resistance powder coating .
2. Specially formulated toughned glass cover.
3. Min IP I66 to ensure fixture is water and dust tight .
4. External separate Silicon encapsulated mettalic isolated driver for ensuring better reliability and safety. 10KV/5KVA external surge arrestor.
6. Fixture should be warrantied for 3yrs for 50,000 hrs @ L70 7. The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . (Approved Led source Nichia , Cree, Lumileds , Osram Only)
8. PF >=0.95 and THD <=15 % (Certificate need to be submitted from NABL Accredited lab)
9. The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004 Company
10. Have their own driver Manufacturing Facility.
11. Have their own NABL accredited lab
12. Fixture should be offered in ebony black color . Light Colors 5700 deg K, 4000 deg K, 3000 deg K , light beam angles , 10 deg , 30 deg and 40 deg.
Lighting Technologies : Linear Wall Washer 40w 1200mm Warm White .The Fixture Shall wall / Surface mounted. ( L04030F030 ) Or Equivalent in Osram-Traxon or Philips-Color Kinectics
5
1
5
... More
ELV SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
17
1
17
... More
Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
1
1
1
... More
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
12
1
12
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
1
1
1
... More
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.
1
1
1
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.: 4 Zone
1
1
1
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
175
1
175
... More
Supply and installation of DLP projector - 4000 ANSI lumens, 1024X768 pixels, contrast ratio - 2500:1, XGA Either table top or ceiling mounted
1
1
1
... More
supply and installation of projector Screen (150" Diagonal) with black border and tubular motor driving device with less noise, smooth function and remote control
1
1
1
... More
Supply and installation of VGA Cable (Factory Crimp)
25
1
25
... More
Supply and installation of HDMI Cable (Factory crimp)
25
1
25
... More
DOME CAMERA-Full HD 1080p 25/30 fps image with a 1/2.7" or 1/2.8" 2 MP sensor, 2.7–12 mm, F1.4,zoom lens,True WDR up to 140 dB ensures glare-free images,H.264 and MJPEG codec, triple stream support, IR LEDs provide up to 50 m (150’) of illumination in dimly lit or nighttime scenes, Waterproof (IP67) and IK10 vandal resistant camera housing ,ONVIF Profile S and G compliant
10
1
10
... More
Network Video Recorder: Supply, Installation, Testing and Commissioning of IP survellance solution central management 1080P with minimum 16 Channel NVR 8 SATA HDD with 5 Client License, with required slots numbers of Hard Disk (4 TB SURVILANCE GRADE HDD) and slots to carry out 30Days backup. Recording speed at 25/30FPS.
1
1
1
... More
Supply, Installation, Testing and commissioning of 1 TB Surveillance
series Hard disk
5
1
5
... More
Supply, installation, testing and commissioning of CAT6A UTP patch cord-1m
24
1
24
... More
Supply, installation, testing and commissioning of 24 Port CAT6A UTP Jack panel with Cable Manager
2
1
2
... More
Supply, installation, testing and commissioning of L3 Network Switch with 24 port 10/100/1000 Mbps switch with 2 Gigabit combo slots(RJ45/SFP)
1
1
1
... More
Supplying and erecting approved make online Un-interruptible Power Supply system with IGBT Based rectifer and Inverter & sealed maintenance free batteries. Single phase Input and Single Phase output with Inbuilt Isolation transformer with 0.8 load power factor with battery, over under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries for 30 Min Backup (Minimum 1008 VAh) 1 KVA UPS with 28 AH, 3 Nos. Battery Certification : BIS
2
1
2
... More
SITC Of 40 Inch Full HD LED TV as per tender specification.
1
1
1
... More
Supply, installation, testing and commissioning of CAT6A UTP patch cord-2m
24
1
24
... More
Supply, installation, testing and commissioning of 9 U Rack
including necessary power mounting and fan arrangements for mounting
CCTV equipments
1
1
1
... More
Wi-Fi System : Supply, Installation, testing & commisioning of Wire less WiFi Router with below specification Networking Interface : (1) 10/100 Ethernet Port Buttons : Reset Antennas ,Power Method : Passive Power over Ethernet (12-24V) Power Supply : Included 24V, 0.5A PoE Adapter Maximum Power Consumption : 6 W Maximum TX Power : 27 dBm BSSID : Up to Four Per Radio Power Save : Supported Wireless Security : WEP, WPA-PSK, WPA-TKIP,WPA2 AES.
2
1
2
... More
Supplying & erecting Amplifier having following specification:
Power Output :500W (RMS) (550W Max.)
inputs : 6 Misc. & 2 Aux.
frequency Response :50-1500HZ I3db
Tone Controls :Cut & Boost type
LED Meter :5 LED Arrays
The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly protected by wrong Battery Polarity connections. [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
1
1
1
... More
Supplying & erecting four channel Echo Mixer Pre-amplifier with following specification.
(i) Suitable to operate on 24OV.A.C. & 12 V D.C. Battery supply
(ii) B.B.D. Delay system ECHO facility on all inputs through ECHO volume, Repeat & Delay system.
(iii) Peak LED for setting optimum distortion free input levels
(iv) Two outputs, variable for line & fixed for recording
(v)Compatible with Audio Mixing consoles. [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
1
1
1
... More
Supplying & erecting 50W Pole Mounted Horn Loudspeaker, Coverage Angle HxV (-g dB, 1kHz) 60 x 60 degree, Frequency range (-10 dB) (Hz) 350-4000 Hz, Operating Temp : -25 to 55 deg C, Rated Input Voltage - 100V, Sensitivity : 110 dB, Water & Dust protected IP 65, BS 5839-8 and EN 60849 compliance compete with 6 Mtr Height Octagonal Pole complete with Foundation base, accessories to complete the job.
4
1
4
... More
Supplying, erecting & testing Approved make Microphone for announcement, speech & general P.A. application with frequency response of 150 - 10000 Hz having sensitivity 2mv/Pa, & impedance 600 Ohms supplied with quick detachable holder, 6 mtr twin core cable & PCIM / MCIF connector. [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
1
1
1
... More
PA SYSTEM: Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. (B)Speaker cable Two pair, 2-core, 2.5 sqmm
1
1
1
... More
Multipurpose Training Tower
-
-
-
... More
Multipurpose Training Tower : Design , supply , installation , testing & commissioning of Tower as per approved shop drawing by consultant /client. Tower Dimensions: 15 H X 12 W X 1.5 L Mtrs, Area Required: 20 X 8 mtrs, Height of the Wall: 15 Mtrs, Width of the Wall: 12Mtrs, Climbing Panel Faces: 1 X Speed Wall + 1 X Overhang Wall + 1 X Rappelling Wall + 1 X Staircase, Speed Wall Dimensions: 15X6 Mtrs, Overhang Wall Dimensions: 15X6 Mtrs, Rappelling Wall Dimensions: 15X1.5 Mtrs, Total Climbing Surface: 120 Sq Mtrs, Color Scheme: Custom Color – Paint as per client’s choice, Usage: Easy to Moderate Climbing, Wall Design Standard: EN 12572, Safety Type: Auto Belay System – Head Rush Technology, Manual Belay System: Edelrid, Germany, Numbers of Climbers: 4 Climbers simultaneously, Footing Details: RCC Foundations as per STAAD Model, Foundation Standards: IS 456, Support structure: Mild Steel Structure attached to RCC Foundations, Structure Standard: IS 800, Surface for Speed Climbing: Flat polyester resin panels with 18 MM thickness for outdoor use, Surface for Lead Climbing: Flat polyester resin panels with 10 MM thickness for outdoor use, Rappelling Panels: Birch Wood Panels with FRP Coast – 18 MM, Climbing Holds: Assorted Climbing Holds and Volumes – Oxo Brand, Crash Mattress: Crash Mattress tested in accordance with EN 1177: 2008, Steel Type: Confirming to IS:2062 of 2011 (Grade E-250 Quality ‘BR’).
Design & Engineering – 3D Design with custom colors and Structural Drawings: 180 Sq Mtrs, RCC Foundation – Foundation work as per drawings be certified structural engineer as per IS 456: 21 CUM, Steel Sub-frame – Mild Steel Sub-frame to be attached to the RCC foundation with MS Foundation and bolts.: 24000 Kgs, Roof Sheet – GI roof sheet to cover the roof: 45 Sq mtrs, Speed Climbing Wall Panels: 90 Sq Mtrs, Lead Climbing Wall Panels: 90 Sq Mtrs, Rappelling Side Covering Panels: 22.5 Sq Mtrs, Climbing Holds for Lead Wall: 500 Nos, Climbing Volumes: 30 Nos, Speed Climbing Holds: 2 Set, HMS Carabiner UIAA: 50 Nos, Quick Draws – UIAA: 50 Nos, Dynamic Rope UIAA: 360 Mtrs, Static Rope UIAA: 300 Mtrs, Belay Device – UIAA: 20 Nos, Auto Belay Device: 2 Nos, Semi Auto Belay Device: 5 Nos, Sewn Nylon /Dyneema Sling – 1200 mm: 30 Nos, Hangers UIAA: 50 Nos, Mittens: 10 Nos, Crash Pad 300 mm Thick: 48 SQM, EVA foam 25 mm thick: 144 SQM
The scope includes Installation all Material Supply, Installation, loading, transportation ,unloading and delivery and erection site of all fabricated structures,, alignment and welding of all structures true to line, level, plumb and dimension, including rectification if any, splicing, site assembly all as per technical specifications and drawings,all complete. Contactor shall provide stability certificate for the fabrication structure. Rate inclusive of shop drawing. Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc. complete as per drawings, specifications & instruction of Client/EIC.
1
1
1
... More
Rate only Item
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
1
1
1
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
1
1
1
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. : Cement mortar 1:4 (1 cement :4 coarse sand)
1
1
1
... More
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
1
1
1
... More
Anti-Termite System:Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip every 30 cm interval in the tube, having working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the entire periphery of the building and at internal network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as per building layout ) & Ends of loop pass through a PVC elbow of minimum 32 mm ID at junction box of wall and floor level, entering into a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into junction box and the loops shall terminate in junction boxes & test every junction during injecting chemicals for termite control treatment. The anti termite chemical Imidacloprid 30.5% SC mix as per IS- 6313 (part III) shall be injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved
line plan for piping system and junction boxes dully approved by Engineer-in-Charge with bond of 5 year warranty.(i)Anti Termite chemical injected area (Chemical injecting incl. labour cost)
1
1
1
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
1
1
1
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work (MS Jali work)
1
1
1
... More
Roofing Canopy : Providing and Fixing of COXWELL DOMES ROOF SYSTEM consisting of MultiCell Polycarbonate Panel System of approved color in 10 mm Thick (minimum) 6 WALL -5 CELL having uniform in color, Vertical Standing Seam manufactured at both sides of the panel. Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism Panel shall in fixed with M.S. Structure with Aluminum Extruded Single Piece Cleats in which 3 Self Drilling SDST Screw will be applied to handle best Up Lifting Pressure. Panel shall be co-extruded UV protected. The full system shall be fitted on MS purlins perpendicular to direction of sheeting with purlin spacing as specified by Manufacturer.7000N Tested as per ISO 6892:1998 and IS 1608:2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheet which have been exposed to UV for a min of 500 Hours as per ASTM G155. Panel shall not have Yellowness Index as per ASTM D1925 of 15 units when tested on samples exposed to UV for 500 Hours as per ASTM G 155. U Value shall not be more than 1.9 W/m2K as per EN ISO 10077-2 :2018. Polycarbonate Panel Ends shall be closed with Aluminum U profile /F Profile as and when required. The rate includes cost of all the operations, labour and all materials involved such as bolts nuts and screws etc. and labour for cutting bending to required profile. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the Detailed specification, shop drawing , approved sample, instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. Roof plan area shall be measured for payment. (Note: MS Fabrication and steel work paid separately in KG)
1
1
1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in Charge. External work.65 mm nominal dia Pipes
1
1
1
... More
80 mm nominal dia Pipes
1
1
1
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
1
1
1
... More
50 mm nominal bore
1
1
1
... More
65 mm nominal bore
1
1
1
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants,
with C.I. surface box 350x350 mm top and 165 mm deep ( inside)
with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10
graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick,
finished with a floating coat of neat cement complete as per standard
design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
1
1
... More
HYDRO PNEUMATIC SYSTEM FOR DOMESTIC WATER DISTRIBUTION
Variable Speed Hydro-booster System : Compact self contained Hydro-booster system comprising of following : In-line, vertical multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304 shaft, C.I. Base CED coating & head TEFC motor (with mechanical seal) Vendor to submit performance curves and technical catalogue of the proposed model for review and information. The job shall include required size of Foot valve, Inlet Pipe, Outlet Pipe, Y Strainer, NRV, Inlet & Outlet Valves, Main Header Header, Pressure Valve, and all required accessories to complete the job.
Panel mounted PLC based multi pump controller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a single body or as separate components with pressure sensor transmitter, IP 55 enclosure, diodes to indicate pump ready, pump running and fault condition. Each incomer and Outgoing feeder should be capable for protection against Overload, Short Circuit and Phase reversal condition. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. Indication of all type of faults / on-off status. Electronic type low water level controller with LED panel to operate pump (necessary contacts along with minimum one PLC operated spare contacts required), with probe & all control wiring from Panel to tank to operate the system automatic/manual & shall prevent the pump from dry running.
Scope shall also include power and control cable of required size, termination, cable tray from Pump to Control panel etc. complete the job.
Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be as per manufacturer recommendation).
Set of accessories such as GI headers of suction and discharge for (working and stand by pump assembly), control valves, non return valves, pressure switches, pressure transducers, pressure gauge etc. complete the job.
Domestic Water Supply Distribution PUMP:
Capacity per pump - 150 LPM
1 Set = 1 Nos. Pump (1 Working + 1 Standby - cascade operation)
Total Capacity of System: 300 LPM
Head - 40 mt
Location - Pump Room
Suction head - Negative Suction
1
1
1
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 32mm dia
1
1
1
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 100mm
1
1
1
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 150mm
1
1
1
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 200mm
1
1
1
... More
Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 250mm
1
1
1
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up tohaunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe
1
1
1
... More
150 mm diameter S.W. pipe
1
1
1
... More
200 mm diameter S.W. pipe
1
1
1
... More
250 mm diameter S.W. pipe
1
1
1
... More
Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight
C.I. cover with frame of 300 x300 mm size (inside) the weight of
cover to be not less than 4.50 kg and frame to be not less than 2.70
kg as per standard design:With common burnt clay F.P.S. (non modular)bricks of class designation 7.5.180x150 mm size P type
1
1
1
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular)bricks of class designation 7.5
1
1
1
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover
with frame (medium duty) 500 mm internal diameter, total
weight of cover and frame to be not less than 116 kg (weight
of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
1
1
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular)bricks of class designation 7.5
1
1
1
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
1
1
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
1
1
1
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way , Double door
1
1
1
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
1
1
1
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A
1
1
1
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
1
1
1
... More
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
1
1
1
... More
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
Supplying and fixing 20 A, 240 V, SPN Industrial type socket
1
1
1
... More
Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc .with manufacturers calibration certificate.
1
1
1
... More
Supplying and erecting Ammeter/ Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board with necessary connections.
1
1
1
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
1
1
1
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 16 sq. mm (25mm)
1
1
1
... More
Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 16 sq. mm
1
1
1
... More
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)
1
1
1
... More
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (c) 4 core 10 Sq. mm
1
1
1
... More
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A-1) 4 core 4 Sq. mm
1
1
1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%