Military Engineer Services Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Electrical and Electronics
Electrical Works
Eprocure
Opening Date20 Dec 2024
Closing Soon15 Jan 2025
Tender Amount₹ 40,00,000
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689602_1Tender No
8224/24-25/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
(a) Size of Cable 3.5 x 400/300/240 Sq mm.
25
-
-
... More
(b) Size of Cable 3.5 x 185/150 Sq mm.
20
-
-
... More
(c) Size of Cable 3.5 x 120/95 Sq mm.
15
-
-
... More
(d) Size of Cable 3.5 x 35/50/70 Sq mm.
20
-
-
... More
(e) Size of Cable 3.5 x 16/25 Sq mm.
20
-
-
... More
S&F in repair for cross arms, bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts and washers, weldsing, bending cold or hot drilling holes for bolts any shapes of size as indicated or direct and inclusive of one coat of red oxide primer and one coat of synthetic enamel paint complete all as specified and directed.
0.6
-
-
... More
S&F in repair Bus bar chamber, wall mounted 200 amp, 4 way current rating, factory , dust and vermin proof including bus bar of rectangular cross section of copper strip supported on case epoxy insulator at suitable interval heat shrinkable sleeves with proper colour code 01 set of 04 strips complete with grouting in wall/floor including PCC work for holding enclosure complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
M & L in repair for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core 25/35 Sqmm including complete testing after joint complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
M & L in repair for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core 50/70 Sqmm including complete testing after joint complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
M & L in repair for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core 95/120 Sqmm including complete testing after joint complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
M & L in repair for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core 150/185 Sqmm including complete testing after joint complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
M & L in repair for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core 240/300 Sqmm including complete testing after joint complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
S&F in repair of cable jointing kit (Heat shrinkable) for 11 KV (earthed) grade cable for indoor termination complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor of size 95 Sqmm including complete testing after joint complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
All as per Item no. 10.00 above, but outdoor termination type joint kit complete all as specified and directed.
3
-
-
... More
S&F in repair of cable jointing kit for 11 KV(earthed) grade cable for straight through Hot shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminim conductor of size 95 Sqmm including complete testing after joint complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed.
111.2
-
-
... More
Returning , filling in trenches, including spreading , levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
100
-
-
... More
Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
11
-
-
... More
Supply and laying in repair of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene 'O' rong of following size:-
-
-
-
... More
(i) DWC HDPE pipe 75 mm innner dia ( for protection of 185 to 500 sqmm UG cable)
95
-
-
... More
(iii) DWC HDPE pipe 63 mm innner dia ( for protection of 150/120 sqmm UG cable)
125
-
-
... More
(iv) DWC HDPE pipe 50 mm innner dia ( for protection of 95/70/50 sqmm UG cable)
275
-
-
... More
(v) DWC HDPE pipe 38 mm innner dia ( for protection of 25/16 sqmm UG cable)
275
-
-
... More
M & L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as directed by Engineer-in- charge.
Note:- Pipe for protection of cable shall be measured and paid separately.
52
-
-
... More
S&F in repairs light grade GI tubing of 50mm bore for cable protection in wall/trench including necessary saddling and nut bolt complete all as specified and directed.
12
-
-
... More
All as per Item No 18.00 above, but 80 mm bore GI tubing complete all as specified and directed.
12
-
-
... More
Supplying and laying in repair XLPE insulated, PVC sheathed, armoured, heavy duty, aluminium conductor LT 1100/11 KV Volts grade including taking out old/unserviceable underground cable complete and fixed on walls and trenches etc including all electrical connection and testing complete all as specified and directed of following sizes: -
-
-
-
... More
XLPE LT cable of size 16 Sqmm 4 core
125
-
-
... More
XLPE LT cable of size 25 Sqmm 3.5 core
150
-
-
... More
XLPE LT cable of size 50 Sqmm 3.5 core
100
-
-
... More
XLPE LT cable of size 70 Sqmm 3.5 core
100
-
-
... More
XLPE LT cable of size 95 Sqmm 3.5 core
75
-
-
... More
XLPE HT cable of size 95 Sqmm 3 core, 11 KV
25
-
-
... More
XLPE LT cable of size 120 Sqmm 3.5 core
50
-
-
... More
XLPE LT cable of size 185 Sqmm 3.5 core
50
-
-
... More
XLPE LT cable of size 400 Sqmm 3.5 core
20
-
-
... More
Supply & fix cable path indicator made of RCC (size 0.2 mtr x 0.1 mtr x 0.75 mtr height) 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia TMT bars 100 mm c/c horizontally vertically,voltage & cable size mentioned in bold letters painted with one coat of brown paint & back ground with two coats of yellow paint and in foundation PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate of size 0.3 mtr x 0.2 mtr x 0.3 mtr including necessary excavation, earth work and removal complete all as specified and directed.
1
-
-
... More
S & F in replacement MCCBs including all electrical connection and testing complete all as specified and directed by EIC of following size :-
-
-
-
... More
MCCB TP 630 amp Adjustable type 50 KA
1
-
-
... More
MCCB TP 250 amp Adjustable type 25 KA
1
-
-
... More
MCCB TP 400 amp Adjustable type 36 KA .
1
-
-
... More
MCCB TP 200 amp Adjustable type 25 KA .
1
-
-
... More
MCCB TP 160 amp Adjustable type 25 KA
1
-
-
... More
MCCB FP 630 amp Adjustable type 50 KA
1
-
-
... More
MCCB FP 400 amp Adjustable type 36 KA .
1
-
-
... More
MCCB FP 250 amp Adjustable type 25 KA .
1
-
-
... More
MCCB FP 200 amp Adjustable type 25 KA .
3
-
-
... More
MCCB FP 160 amp Adjustable type 25 KA
3
-
-
... More
MCCB TP 125 amp fixed type 16 KA
2
-
-
... More
MCCB TP 100 amp fixed type 10 KA.
7
-
-
... More
MCCB FP 100 amp fixed type 10 KA.
5
-
-
... More
MCCB FP 125 amp fixed type 16 KA.
5
-
-
... More
MCCB FP 63 amp fixed type 10 KA.
10
-
-
... More
MCB TPN 63A, C Curve
19
-
-
... More
MCB TP 40 A, C curve
15
-
-
... More
S& F in replacement ACB 4 Pole, 415 V,50 Hz with Thermal Magnetic ,Release (Manual drawout type) of capacity 800 Amps, 50 KA, including all necessary electrical cable connections and testing complete all as specified and directed by EIC.
1
-
-
... More
S& F in replacement On load change over switch with sheet metal Enclosure 63 amp , 4 pole , Including all electrical connection and testing complete all as specified directed by EIC
2
-
-
... More
S& F in replacement On load change over switch with sheet metal Enclosure 100 amp , 4 pole Including all electrical connection and testing complete all as specified directed by EIC
2
-
-
... More
S& F in replacement On load change over switch with sheet metal Enclosure 125 amp , 4 pole , Including all electrical connection and testing complete all as specified directed by EIC
1
-
-
... More
S& F in replacement On load change over switch with sheet metal Enclosure 200 amp , 4 pole Including all electrical connection and testing complete all as specified and directed by EIC
1
-
-
... More
S& F in replacement On load change over switch open execution 400 amp , 4 pole Including all electrical connection and testing complete all as specified and directed by EIC
2
-
-
... More
S& F in replacement On load change over switch open execution 630 amp , 4 pole Including all electrical connection and testing complete all as specified and directed by EIC
2
-
-
... More
S& F in replacement Voltmeter digital type 96 x 96 mm square, 0-500Volt ncluding all electrical connection and testing complete all as specified and directed by EIC
2
-
-
... More
S& F in replacement Ammeter Digital type 96 x 96 mm square , 0-200Amp, including suitable CT's Including all electrical connection and testing complete all as specified directed by EIC
2
-
-
... More
S& F in replacement Aluminium lugs of sizes 300/150/95/50/35/25 Sqmm Including all electrical connection and testing complete all as specified and directed by EIC
90
-
-
... More
Supply and fix in replacement of APFC relay 8/6 stage, 144 x 144 size including all electrical connection and testing complete all as specified and directed by EIC
1
-
-
... More
Supply and fix in replacement of CT Coil, 150/5 amp including all electrical connection and testing complete all as specified and directed by EIC
4
-
-
... More
M & L for control wiring in APFC panel with copper flexible wire 2.5 Sqmm including all electrical connection and testing complete all as specified and directed by EIC
5
-
-
... More
M&L for servicing of APFC panel of any rating to maintain the power factor at optimum level ie above 0.95 & producing servicing certificate from authorised dealer complete all as specified and directed by EIC
Note:- Addtional parts ,if required will be measured and paid separately.
6
-
-
... More
Supply and fix in replacement of contactor for 25 KVAR including all electrical connection and testing complete all as specified and directed by EIC.
2
-
-
... More
Supply and fix in replacement of contactor for 15/20 KVAR including all electrical connection and testing complete all as specified and directed by EIC.
2
-
-
... More
Supply and fix in replacement of contactor for 5/10/12.5 KVAR including all electrical connection and testing complete all as specified and directed by EIC.
2
-
-
... More
Supply and fix in replacement of KVAR capacitor 5 to 10 KVAR including all electrical connection and testing complete all as specified and directed by EIC.
2
-
-
... More
Supply and fix in replacement of KVAR capacitor 12.5/15/20 KVAR including all electrical connection and testing complete all as specified and directed by EIC.
2
-
-
... More
Supply and fix in replacement of KVAR capacitor 25 KVAR including all electrical connection and testing complete all as specified and directed by EIC.
2
-
-
... More
M&L for painting to steel surfaces of feeder pillar box of size 600(W) X 900(H) X 400 (D) with one coat of approved colour synthetic enamel paint including preparation of surfaces with one coat primer complete all as specified and directed by EIC.
25
-
-
... More
All as per Item No.43 here in before but steel surfaces of feeder pillar box of size 750(W) X 1250(H) X 400 (D)
15
-
-
... More
All as per Item No.43 here in before but steel surfaces of feeder pillar box of size 2500(W) X 1850(H) X 400 (D)
6
-
-
... More
All as per Item No.43 here in before but steel surfaces of feeder pillar box of size 1750(W) X 1250(H) X 400 (D)
6
-
-
... More
M & L in replacement of Drop Out fuses (expulsion fuses) single pole, 11000 volt above 25 & upto 50 Amp complete all as specified and directed by EIC.
2
-
-
... More
S&F switch air break gang operated triple pole, mechanically operated, mounted on insulator and steel frame with operating mechanism working out from ground level for current rating 200 amps suitbale for 11 KV complete all as specified and directed by EIC.
1
-
-
... More
S&F in replacement lightning arrester (expulsion type) complete with all fittings, transmission class discharge capacity 65 KA suitable for 11 KV complete all as specified and directed by EIC.
1
-
-
... More
Supply and fix in replacement HRC Fuse of 100/125 A capacity complete all as specified and directed by EIC.
25
-
-
... More
M & L for maintenance & repairing/servicing of 1.1 KV, LT ACB panel,dusting, oiling , setting of over current and earth fault relay setting including complete testing complete all as specified and directed. Note:- Addtional parts ,if required will be measured and paid separately.
2
-
-
... More
Supply only No Volt Coil for 630/800 Amp
1
-
-
... More
M & L for servicing and maintenance of 11 KV HT VCB with relay testing and high voltage and relay setting corrections including complete testing all as specified and directed. Note:- Addtional parts, if required will be measured and paid separately.
2
-
-
... More
Supply only Spring charging motor
1
-
-
... More
Supply only BKR Auxiliary switch
1
-
-
... More
Supply only Closing coil
1
-
-
... More
Supply only Tripping coil
1
-
-
... More
Supply only Insulation shrouds
6
-
-
... More
M&L for Maintenance & servicing of 11 KV, HT RMU with following work:-
(a) Load Break Switch:-
(i) On-Off Operation Checking.
(ii) Interlocking of the LBS.
(iii) Hardware tightening of the mechanism
(iv) Latch Roller Condition
(v) LBS lever lubrication
(vi) Aux Switch setting if unit is motorized. (b) Circuit Breaker
(i) On-Off Operation of CB.
(ii) Tripper Setting.
(iii) Cable Box Interlock of the CB,
(iv) Pad Lock of CB.
(v) Cam Setting.
(vi) Reset spring setting.
(vii) Lubrication to required parts.
(viii) Neutral Catch Setting.
(ix) Off to reset Wire setting.
(x) Aux Switch Setting.
12
-
-
... More
M&L for Testing of 11 KV, HT RMU with following work:-
(i) Relay Primary Injection test.
(ii) Insulation Resistance.
(iii) Contact Resistance.
(iv) Tripper Coil resistance.
(v) Battery Bank replacement. Note for item Nos 53.00 & 54.00
(i) The contractor should carry out servicing through authorised OEM & not by any local mechanic (ii) Proper servicing certificate should be produced immediately after servicing as directed by Engineer-in-charge.
1
-
-
... More
M&L for earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6 mm burried directly in ground level with teop edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanised iron strip 25 x4mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No.3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforce with welded steel wire babric (APM) weight not less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and directed.
8
-
-
... More
All as per item No.55 above but using copper plate 60 cm X 60 cm X 3.15 mm thick electrode and 20 X 3 mm copper strip as eathing lead including earth test point complete all as specified and directed by Engr-In-Charge.
4
-
-
... More
Supply and fix in replacement Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required copper strip 32x 6 mm complete all as specified and directed
25
-
-
... More
All as per item No 57 above but 20x3mm copper strip
30
-
-
... More
All as per item No 57 above but 25x4mm GI strip
50
-
-
... More
M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.
30
-
-
... More
M & L for testing of earthing resistance value with digital type earth tester at different locations of area A&C the entire satisfaction of AF personnel & submitting the earth result complete all as specified and directed.
150
-
-
... More
M & L for Tightening and fixing in position loose hanging copper/aluminium strip of any size on wall or building roof using new insulators of porceline of approved size and fixing existing copper strip on the same as existing complete all as specified and directed by EIC.
160
-
-
... More
Supply and fix in replacement of Copper Strip of size 20 X 3 mm buried/laid in trenches/fixed on wall/tower etc complete all as specified and directed
40
-
-
... More
Supply and fix in replacement of Copper Strip of size 32 X 6 mm buried/laid in trenches/fixed on wall/tower etc complete all as specified and directed
25
-
-
... More
Supply & fixing in repair Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors screws etc. for roof conductors ground complete all as specified and directed.
25
-
-
... More
Supply & Fix in replacement of ceramic supporter with nut bolts / screws for fixing of copper / aluminium strips / GI strips etc of required size on walls etc complete all as specified and directed .
50
-
-
... More
S & F in replacement of first aid box containing medical kits as per existing size complete all as specified and directed by EIC.
4
-
-
... More
S&F in replacement synthetic Rubber insulated mats 2 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m x minimum 2.5 mm thick complete all as specified and directed.
4
-
-
... More
S & F in replacement of electric shock treatment board made up of flux sheet with printed standard matter in three versions(i.e Hindi,English & Gujrati) & standrad drawing over a layer of polythene film pasted on wooden ply board of 6 mm thick with all edges fixed with wooden beedings complete all as specified and directed.
Note:- The over all size of the board shall not less than 1.0 Mtr x 0.75 Mtr
3
-
-
... More
S & F for danger notice plate of 1.6 mm thick MS sheet, vitreous enamellers white, figures & conventional shulls, bones in singal red colour affixed with MS clamps,bolts of approved size for HT 25 x 20 cm size complete all as specified and directed.
4
-
-
... More
S & F Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT 20x15cm size complete all as specified and directed.
2
-
-
... More
S&F in repair anti climbing device, spikes type fabricated out of MS bar round, square, flat) including nuts,bolts,washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed
1
-
-
... More
M&L in replacement of test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25 mm drilled & screwed including 3 hole, 8mm dia 25mm long hexagonal head with nuts & washers complete as specified and directed.
10
-
-
... More
S&F in replacement air temination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed
22
-
-
... More
All as per item No 74.00 above, but copper rod 12mm dia and 300mm long complete.
20
-
-
... More
S&F in replacement of 40 mm bore GI tubing, light grade galvanized with all fitting and fixed to walls and ceilings or laid in floors for earthing strip protection complete all as specified and directed.
24
-
-
... More
M&L for colour coding of earthing pit cover with the following colour :- Red for chemical earth pit. Yellow for conventional earth pit. The numbering/marking of earth pit will be in capital black colour and is to be done as directed by Engineer -in- Charge.
60
-
-
... More
M&L for coarse aggregates, grading l, 90 to 40 mm size or grading 3, 50 to 20 mm size granite for spreading on ground for Four/Two pole structure complete all as specified and directed.
1
-
-
... More
M&L for industrial salt for earthing pit recharging complete all as specified and directed by Engineer in charge.
700
-
-
... More
M& L for technical grade Magnisium Sulphate for earthing pit recharging complete all as specified and directed by Engineer in charge.
950
-
-
... More
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
1
-
-
... More
M&L for PCC 1 : 3 : 6 type C1 (Using 20 mm graded crushed stone aggregate) for foundation / concrete blocks / earthing chamber / chamber cover complete all as directed by Engineer-in-charge.
1
-
-
... More
S&F in replacement of 15 mm bore GI tubing, medium grade galvanized with all fitting and laid in trenches complete all as specified and directed .
30
-
-
... More
S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends to iron pipe and fixed to 15 mm bore pipe complete all as specified and directed.
30
-
-
... More
M&L for mild steel chequered plate, 5 mm thick or over in thickness, grade Fe-290 (Gde E-165) in available sizes for duct cover complete all as specified directed by EIC te.
20
-
-
... More
S&F in repair Flat twin core cable weather proof Aluminium Conductor of size 6 sqmm complete all as specified and directed.
190
-
-
... More
Supply, install, testing and commissioning weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type canopy top factory lock front and back opening totally enclosed made out of 3.15mm thick sheetmetal enclosure of suitable size with angle iron frame of MS angle 40 X 40 X 5mm upto 1.5 mtrs length from ground level duly powder coated of size 600 (w) x 900 (H) x 400 (D) mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and side locking arrangement consisting of sufficient Nos of circular cables entrly holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc. inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15micron) grey hammer tone with one coat of including connecting with L.T armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium and LT panel should be CPRI approved and factory fabricated complete all as specified and directed and consisting of the following:-
(i) MCCB 125 Amp, 4 Pole(AC 415 Volt), 16 KA - 01 No (ii) 63 Amp MCB TPN, 415V, 10 KA - 04 Nos, (Out going)
(iii) AL bus bar 200 Amp - 01 set
(iv) Indicator LED lamp RYB - 01 Set
(v) Internal wiring with copper conductor incl necessary lugs and thimbles - 01 Job (vi) Space for 02 Nos of spare MCCB (vii) LED display 3 line Multimeter 01nos
3
-
-
... More
S & F in replacement of Glow sign board of size 5 feet x 4 feet x 8 inches thick (1640 mm x 1310 mm x 200 mm thick), made out of flex paper roll sheet on 25 mm x 25 mm x 2 mm thick anodised aluminium angle frame, including 4 Nos. of 20 W LED lights fitting (internally to the glow sign board) including providing all internal wiring and main connection with 1.5 sqmm single core stranded copper conductor (length not exceeding 10 mtr), matter of board will be as approved by Engineer In Charge.
2
-
-
... More
Supply, install, testing and commissioning weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type canopy top factory lock front and back opening totally enclosed made out of 3.15mm thick sheetmetal enclosure of suitable size with angle iron frame of MS angle 50 X 50 X 6mm upto 1.5 mtrs length from ground level duly powder coated of size 800 (w) x 1000 (H) x 400 (D) mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and side locking arrangement consisting of sufficient Nos of circular cables entrly holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc. inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15micron) grey hammer tone with one coat of including connecting with L.T armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium and LT panel should be CPRI approved and factory fabricated complete all as specified and directed and consisting of the following:-
(i) MCCB 200 Amp, 4 Pole(AC 415 Volt), 16 KA - 01 No (ii) 100 Amp MCCB, 4 Pole, 415V, 16 KA - 04 Nos, (Out going)
(iii) AL bus bar min 400 Amp - 01 set
(iv) LED lamp RYB - 01 Set
(v) Internal wiring with copper conductor incl necessary lugs and thimbles - 01 Job
(vi) Digital voltmeter 0-500V
(vii) Digital ampere meter 0-200 Amp (viii) Space for 02 Nos of spare MCCB .
1
-
-
... More
M&L for defect rectification in HT 11 KV cable laid in trenches by locating fault with the help of electronic fault locator machine comprising of surge generator pulse ECHP fault location with high frequency distance calculator etc. Excavation in any type of soil strata exposing the cable fault removal of deteriorated position of cable treating of cable and keeping the same ready for jointing work for cables of size upto 300 sqmm 3 core. The fault located equipment will be brought at site within 02 hours of Instruction received from Engineer-in-charge complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
M & L for disconnecting terminals of LT cable and by locating fault with the help of electronic fault locator machine comprising of surge generator pulse ECHP fault location with high frequency distance calculator etclocating pin point fault in LT cable 1100 Volts grade of any size including excavation in any type of soil strata exposing the cable fault removal of deteriorated position of cable treating of cable and keeping the same ready for jointing work for cables of size upto 400 sqmm 3 core. The fault located equipment will be brought at site within 02 hours of Instruction received from Engineer-in-charge complete all as specified and as directed by Engineer-in-charge.
10
-
-
... More
SECTION - II (Voltage Stabilizer)
-
-
-
... More
M & L for servicing of servo controlled voltage stabilizer 300/200 KVA, 415 volt including setting of input and output voltage complete all as specified and as directed.
Note:- Spare required for replacement if any will be measured and paid separately.
3
-
-
... More
All as per item 93 here in before but for 100 KVA capacity
3
-
-
... More
Supply Only following spares only for servo controlled voltage stabilizer of 300/150/100/75 KVA
-
-
-
... More
Shunt Trip coil of any size
2
-
-
... More
Cut out PCB,3-phase
2
-
-
... More
Micro-controller PCB with connector
1
-
-
... More
control cabling with glass fuse
12
-
-
... More
Indication lamp, 22.5 mm dia, R - Y- B
4
-
-
... More
Push button,12.5 dia,R -Y-B
5
-
-
... More
Single phase , Synchronise AC motor, 10 KG
2
-
-
... More
RC network for 10 KG motor
2
-
-
... More
Sensing Transformer for Digital/analog control
2
-
-
... More
Aluminium Busbar of any size and any capacity.
2
-
-
... More
Rewinding of Stabiliser buck boost transformer/Variable voltage transformer, single phase. I/P -0-144 VAC, O/P- 0 -85 VAC with super enameled copper wire / strips DPC / super enameled matching with existing gauge and insulating material of high class as per manufacture recommendation with packing / insulation material in each layer of winding complete all as specified and as directed
30
-
-
... More
Stabiliser carbon Brush for Dimmer
3
-
-
... More
SECTION - III (DG Set Maint)
-
-
-
... More
Repair/Servicing incl testing of DG Sets of all capacities incl inbuilt control panels & AMF panels all as per OEM recommendations/instructions & including the following works/Job to the entire satisfaction of the Engr-in-Charge complete :
(a) Check & replace Engine Oil (Lube Oil).
(b) Check & replace Lube Oil filter.
(c) Check & replace Fuel filter.
(d) Check & clean Battery terminals, applying petroleum jelly.
(e) Check Coolant level, Top up if required.
(f) Check & clean Centrifugal Filter.
(g) Check & clean V-Belt, replace if required.
(h) Check & clean Elements (Single Dry type, Air filter Primary/Secondary), replace if required.
(l) Check & clean Hoses (Coolant/Air Circuit), replace if required.
(m) Check Tappet Setting, repair/rectify if required.
(n) Check & clean Exhaust Silencer.(o) Check for loose connection, retighten Panel Contactor relay/wiring harness incl inspection of all metering instruments.
(p) Check & clean Exhaust fan, replace if required. (q) Check & clean Starter assy/Charging Alternator/Turbo Charger/Fuel Pump & Nozzles/Lube Oil Cooler/Thermostat/Water Pump assy/AVR etc.
(r) Check Hinges & Lock, replace if required.
(s) Check Stop Solenoid, replace if required.
(t) Check Main AC Alternator winding.
(u) Check Engine/Alternator performance etc.
10
-
-
... More
NOTE :
1) Relevant spares/items/materials required for the above mentioned repair/servicing job shall be measured & paid separately as Supply only. Minor spares/repairs, nuts, bolts, washers, gaskets, indicating lamps etc. required for proper functioning of DG Sets/AMF/Control Panels. Decision of GE/Engr-In-Chrarge w.r.t. incorporation of Major/Minor spares/repairs shall be final & binding.
2) DG maint/servicing/repair job to be executed only through auth Service Dealer of OEM/Channel Partner & Certificate regarding the same to be submitted after completion of the work/job. 3) Rep of auth Service Dealer of OEM/Channel Partner must visit the site/DG Sets & accordingly submit detailed Maint/Servicing program/schedule as per the convenience of the Dept. It may happen that on scheduled dates/time it is not possible to allow the service team to work depending upon electrical breakdowns/VIP visits etc.
-
-
-
... More
Attending emergency breakdowns/faults of DG Sets on call of all capacities incl inbuilt control panels & AMF panels etc. complete all & specified & as directed to the entire satisfaction of the Engr-in-Charge.
NOTE : i) Relevant spares/items/materials required for the above mentioned attending breakdown/rectification job shall be measured & paid separately as Supply only. Minor spares/repairs, nuts, bolts, washers, gaskets, indicating lamps etc. required for defect rectification & proper functioning of DG Sets/AMF/Control Panels. Decision of GE/Engr-In-Chrarge w.r.t. incorporation of Major/Minor spares/repairs shall be final & binding.
ii) Attending breakdown job to be executed only through auth Service Dealer of OEM/Channel Partner.
iii) Penalty shall be charged @ Rs. 1000/- per Day for not attending the same within 6 Hrs of telephonic/electronic intimation.
4
-
-
... More
Supply only spares/items/materials required for Maint/Servicing/Repair of the DG Sets against Sl Item No - 97 here in before but Engine OIL (For 10 to 125 KVA).
80
-
-
... More
All as per Item No 99 here in before but Coolant (For 10 to 125 KVA).
70
-
-
... More
All as per Item No 99 here in before but FUEL FILTER primary/secondary (For 10 to 30 KVA).
4
-
-
... More
All as per Item No 99 here in before but FUEL FILTER primary/secondary (For 62.5 to 82.5 KVA).
10
-
-
... More
All as per Item No 99 here in before but FUEL FILTER primary/secondary (For 125 KVA).
4
-
-
... More
All as per Item No 99 here in before but OIL FILTER (For 10 to 30 KVA).
2
-
-
... More
All as per Item No 99 here in before but OIL FILTER (For 62.5 to 82.5 KVA).
5
-
-
... More
All as per Item No 99 here in before but OIL FILTER (For 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but AIR CLEANER ELEMENT (For 10 to 30 KVA).
2
-
-
... More
All as per Item No 99 here in before but AIR CLEANER ELEMENT (For 62.5 to 82.5 KVA).
5
-
-
... More
All as per Item No 99 here in before but AIR CLEANER ELEMENT (For 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but LEFT HAND LOC WITH CATHER (For 62.5 to 125 KVA).
4
-
-
... More
All as per Item No 99 here in before but RIGHT HAND LOC WITH CATHER (For 62.5 to 125 KVA).
4
-
-
... More
All as per Item No 99 here in before but FUEL LEVEL SENSOR 110MM HEIGHT (For 10 to 62.5 KVA).
2
-
-
... More
All as per Item No 99 here in before but LUBE OIL PRESSURE SENSOR (For 82.5 to 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but BELT AVX 10 1500 (For 10 to 62.5 KVA).
2
-
-
... More
All as per Item No 99 here in before but POLY V BELT (FENNER, 6PK-1190) (For 82.5 to 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but FUEL PIPE PRE-FILTER TO TANK 10 to 125 kva
2
-
-
... More
All as per Item No 99 here in before but LEAK OFF PIPE SUB ASSY
1
-
-
... More
All as per Item No 99 here in before but HIGH PRESSURE PIPE ASSY 700MM STRAIGHT 10 to 125 kva.
2
-
-
... More
All as per Item No 99 here in before but LO SUPPLY HOSE FIP M10 BANJO X235 ( (For 62.5 KVA).
2
-
-
... More
All as per Item No 99 here in before but THERMOSTAT BY-PASS HOSE 10 to 125 kva.
1
-
-
... More
All as per Item No 99 here in before but RESTRICTION INDICATOR 10 to 125 kva.
1
-
-
... More
All as per Item No 99 here in before but ON/OFF SELECTOR SWITCH (For 10 to 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but DRAIN PLUG ASSY (For 10 to 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but STOP SOLENOID ASSY-12 V DC (SINGLE COIL) (For 10 to 62.5 KVA).
1
-
-
... More
All as per Item No 99 here in before but CAP ASSY for 10 to 125 kva
2
-
-
... More
All as per Item No 99 here in before but PULLEY ALTERNATOR 68 PCD (For 10 to 125 KVA).
1
-
-
... More
All as per Item No 99 here in before but BUSH FOR ALTERNATOR 32MM (For 10 to 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but RADIATOR CAP, 7PSI SEALED
2
-
-
... More
All as per Item No 99 here in before but OIL FILLER CAP
2
-
-
... More
All as per Item No 99 here in before but LEFT HAND HINGE (For 10 to 125 KVA).
4
-
-
... More
All as per Item No 99 here in before but RIGHT HAND HINGE (For 10 to 125 KVA).
4
-
-
... More
All as per Item No 99 here in before but WATER SEPARATOR
1
-
-
... More
All as per Item No 99 here in before but V-BELT (For 10 to 125 KVA).
2
-
-
... More
All as per Item No 99 here in before but BATTERY CABLE or techno-commercially equivalent (For 10 to 125 KVA).
2
-
-
... More
NOTE for Item No 99.01 to 99.35 : 1) Design/Drawing/BOM/Technical catalogue/specifications to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency is concerned. 2) In the event of non-availability of same type/model/cat-part ref of items/spares in case of old type DG Sets, equivalent ones to be incorporated. Decision of GE/Engr-In-Charge w.r.t. equivalency shall be final & binding.
-
-
-
... More
Supply, install & testing of the WATER PUMP ASSY (For 125 KVA) incl taking down of the old/unsv one for smooth functioning/operation of the DG Sets to the entire satisfaction of the Engr-In-Charge : .
1
-
-
... More
All as per Item No 101 here in before but CENTRIFUGE FILTER (For 10 to 125 KVA).
1
-
-
... More
All as per Item No 101 here in before but WATER PUMP ASSY (For 10 to 82.5 KVA).
1
-
-
... More
All as per Item No 101 here in before but GREEN AVR (For 62.5 to 125 KVA).
2
-
-
... More
All as per Item No 101 here in before but GENERATOR CONTROL UNIT KG645 LEVEL-1 (For 62.5 to 125 KVA).
1
-
-
... More
All as per Item No 101 here in before but BATTERY CHARGER 24 VDC (For 125 KVA).
1
-
-
... More
All as per Item No 101 here in before but BATTERY CHARGER 12 VDC (For 30 KVA to 82.5 KVA).
2
-
-
... More
All as per Item No 101 here in before but BATTERY 12 V, 90 AH.
1
-
-
... More
All as per Item No 101 here in before but BATTERY 12 V, 130 AH.
4
-
-
... More
All as per Item No 101 here in before but TURBOCHARGER (For 62.5 to 125 KVA).
1
-
-
... More
All as per Item No 101 here in before but STARTER 12 VDC, 2.7 KW (For 10 to 30 KVA).
1
-
-
... More
All as per Item No 101 here in before but STARTER 24V (For 62.5 to 125 KVA).
1
-
-
... More
NOTE for Item No 101 to 112:
1) Design/Drawing/BOM/Technical catalogue/specifications to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency is concerned. 2) In the event of non-availability of same type/model/cat-part ref of items/spares in case of old type DG Sets, equivalent ones to be incorporated. Decision of GE/Engr-In-Charge w.r.t. equivalency shall be final & binding.
-
-
-
... More
M&L for DIESEL TANK CLEANING of DG Sets of all capacities incl descaling, removal of dirt/deposited matter, diesel residues etc incl testing after cleaning to the entire satisfaction complete all as specified and as directed
5
-
-
... More
M&L for overhauling/calibration of fuel injection pump assy with injectors complete with & including replacement of unsv/non-functioning elements, delivery valves, overflow valves, screen filters, injector nozzles, service kit, bearing, spring washers, copper washers, benjo bolt, gaskets etc incl testing after overhauling/calibration to the entire satisfaction for 62.5 to 125 KVA.complete all as specified and as directed
2
-
-
... More
M&L for overhauling/calibration of fuel injection pump assy with injectors complete with & including replacement of unsv/non-functioning elements, delivery valves, overflow valves, screen filters, injector nozzles, service kit, bearing, spring washers, copper washers, benjo bolt, gaskets etc incl testing after overhauling/calibration to the entire satisfaction for 10 to 30 KVA.complete all as specified and as directed
1
-
-
... More
M&L for repairs/servicing to radiator assembly of diesel driven generating set engines by proper cleaning of the storage tanks, circulatory tubings and fins with caustic soda solution, soldering leaking points of circulatory tube and storage tanks including testing after repair/servicing for water tightness of capacity 62.5 KVA to 125 KVA complete all as specified and as directed
2
-
-
... More
M&L for repairs/servicing to radiator assembly of diesel driven generating set engines by proper cleaning of the storage tanks, circulatory tubings and fins with caustic soda solution, soldering leaking points of circulatory tube and storage tanks including testing after repair/servicing for water tightness of capacity 10 KVA to 30 KVA complete all as specified and as directed
1
-
-
... More
M&L for repairs to defective alternator of DG Set 10 KVA to 30 KVA engines of different capacities, including handling and conveyance of defective alternator assy to and fro nearest Auth Service Dealer/Workshop of OEM for the following repairs/works : (a) Rewinding of damaged/defective coils with appropriate gauge super enamelled copper wire with high quality paper insulation (b) Heat varnishing (c) Testing after rewinding etc. complete all as specified and as directed to the entire satisfaction of Engr-In-Charge.
1
-
-
... More
All as per Item No 119.00 above, but 62.5 KVA.
1
-
-
... More
All as per Item No.119.00 above, but 82.5 to125 KVA.
1
-
-
... More
M&L for repairs to defective self-starter of DG Set engines of different capacities/types, including handling and conveyance of defective self-starter assy to and fro nearest Auth Service Dealer/Workshop of OEM for the following repairs/works : (a) Rewinding of damaged/defective coils with appropriate gauge super enamelled copper wire with high quality paper insulation (b) Heat varnishing (c) Testing after rewinding etc. complete all as specified and as directed to the entire satisfaction of Engr-In-Charge.
12 Volt system.
1
-
-
... More
All as per Item No.122.00 here in before but 24 Volt system.
1
-
-
... More
M&L for repairs to defective charging alternator of DG Set of capacity 62.5 KVA to 125 KVA engines of different capacities, including handling and conveyance of defective alternator assy to and fro nearest Auth Service Dealer/Workshop of OEM for the following repairs/works : (a) Rewinding of damaged/defective coils with appropriate gauge super enamelled copper wire with high quality paper insulation (b) Heat varnishing (c) Testing after rewinding etc. complete all as specified and as directed.
2
-
-
... More
M & L for VAF meter with suitable capcity of CTs for 62.5/82.5/125 KVA DG set complete all as directed and specified by Engineer-in-charge.
2
-
-
... More
Rewinding of Alternator Main Stator/Rotor Winding with super enameled copper wire / strips DPC / super enameled matching with existing gauge and insulating material of high class as per manufacture recommendation with packing / insulation material in each layer of winding complete all as specified and as directed .
30
-
-
... More
Rewinding of Excitor Main Stator/Rotor Winding with super enameled copper wire / strips DPC / super enameled matching with existing gauge and insulating material of high class as per manufacture recommendation with packing / insulation material in each layer of winding complete all as specified and as directed .
20
-
-
... More
SECTION - IV (EOT Crane)
-
-
-
... More
M & L for comprehensive maintenance consisting of repair, maintenence and servicing including replacement of spares for electrically operated overhead travelling EOT cranes, single/double girded, gear type with electric motor for long travel,cross travel, hoisted creap, control panels, protective panels, gear box, gantry rail, main switches, resistance coil, wire ropes, rope drum, brake control, cable and switches , Servicing Break drum cleaning , all electrical connection checking & connecting. Lubricating of all moving parts, cleaning of DSL, proper alignment of cable trolley, festoon cable system etc. EOT crane of capacity 05 Ton 01 No at Power house of Area A and 01 No at Power house & 01 No at Radar head Hajipur of area C.
Note:- Spares considered under item No 129.01 to 129.27 supply in repair/replacement against item No 129.
7
-
-
... More
Limit switch for LT/CT Make Speed-O-control
1
-
-
... More
Limit switch for Hoist Make Speed-O-control
1
-
-
... More
Brake lining 6mm
1
-
-
... More
Brake Pad
1
-
-
... More
Brake Coil for 100mm &150mm dia
1
-
-
... More
Hydraulic brake for Hoist
1
-
-
... More
Variable Frequency drive (VFD) For LT/ CT Motor
1
-
-
... More
Current collector for DSL
1
-
-
... More
Cable trolley for DSL
1
-
-
... More
Over Load Relay for CT/LT
1
-
-
... More
Over Load Relay for Hoist
1
-
-
... More
Control Transformer 440/24 Volts 200 VA
1
-
-
... More
Brush holder assembly incl carbon brush
1
-
-
... More
3 Pole Power contactor 25A L&T/ Havells
1
-
-
... More
3 Pole Power contactor 16A L&T/ Havells
1
-
-
... More
Magnetic Coil 100mm
1
-
-
... More
Bearing for Motor up to 10HP
1
-
-
... More
Steel wire rope 12mm
5
-
-
... More
Gear Oil C-320 Grade for LT/CT /Hoist
5
-
-
... More
Tranformer oil for brake thruster
2
-
-
... More
Wire rope guardian compound
2
-
-
... More
Muti speed radio remote control
1
-
-
... More
Control Push button for NO/NC
2
-
-
... More
LT PVC insulated and PVC sheathed copper conductor cable 2.5 sqmm 10 core for pendent
10
-
-
... More
LT PVC insulated and PVC sheathed copper conductor control cable 2.5 sqmm 4 core
10
-
-
... More
MCB TPN 415 V, 16 Amps , C curve
1
-
-
... More
MCB TPN 415 V, 32 Amps , C curve
1
-
-
... More
Disconnecting and taking out the defective electric motor from the cranes,transporting to workshop for replacement of burnt out winding with existing gauge super enameled copper wire including insulating paper and varnishing and re-fixing motors to crane after testing, upto 3 HP motor complete all as directed
1
-
-
... More
M & L for Load testing of EOT Cranes of capacity 5 Ton installed at power house of area A, by hiring load (RCC cubes ) 05 Ton capacity in 3 Stages (50% , 75 % and 100% ) including suitable transport, cranes and safety measures required for loading and unloading weight and submitting the test report in specific forms duly signed by testing authority all as specified and directed by Engineer-in-charge.
1
-
-
... More
All as per Item No 131 here in before but EOT crane capacity 2.5 Ton at area C
2
-
-
... More
SECTION - V (Transformers)
-
-
-
... More
M&L for Disconnecting and removing outdoor transformer after disconnecting HT/LT cable terminals connections and lowering down from plinth/platform structure of following capacity
-
-
-
... More
(a) 100-200KVA
3
-
-
... More
(b) 250-500 KVA
3
-
-
... More
M&L for Opening the top cover/lid for periodical maintenance such as cleaning of transformer core, cleaning of oil tank to remove sludge deposit etc of following capacities
-
-
-
... More
(a) 100-200KVA
2
-
-
... More
(b) 250-500 KVA
2
-
-
... More
M&L for Transportation of transformer/Voltage Stabliser/DG Set- to nearest workshop for repair/replacement of transformer/Voltage Stabliser/DG Set- winding and return back for installation in its original position / location after repairing from workshop upto 500 KVA capacity (Rate is inclusive only transportation, T&P and manpower) complete all as specified and as directed by Engineer-in-charge.
3
-
-
... More
M&L for Shifting of serviceable transformer/Voltage Stabliser/DG Set- upto 500 KVA from MES store yard / sub-stn (indoor / outdoor) for installation in place of unserviceable transformer and back after replacing with repaired transformer upto 500 KVA complete all as specified and as directed by Engineer-in-charge
2
-
-
... More
M & L in for cleaning bus bar with CRC solution - 2.26, 200ml spray bottle with the help of cotton waste etc complete all as specified and as directed by Engineer-in-charge.
4
-
-
... More
M&L for Rewinding of HT coils with super enameled copper wire / strips DPC / super enameled matching with existing gauge and insulating material of high class as per manufacture recommendation with packing / insulation material in each layer of winding,Baking the core assembly with the help of oven duly varnshing the coils to improve IR valve and to eliminate moisture and Inserting the core assembly after repair the core and making connection with HT / LT bushing studs & lead extension(replacing studs if damaged) and closing the tank top cover by fixing nuts, bolts and washers (Top cover gasket will be measured and paid for seperately) complete all as specified and as directed by Engineer-in-charge.
120
-
-
... More
All as per item No 139 here in before but LT coil with copper strips.
85
-
-
... More
M & L Re-arranging the top core over coils in proper manner aftr proper cutting out & leaking including fixing of top channel soldering in between coils as necessary and brazing of star delta connection with tap changer for any size of transformer complete all as specified and as directed by Engineer-in-charge
4
-
-
... More
S&F in replacement transformer Bush rods brass as per existing dia/size of HT/LT side including set of brass, washer, nut & bolt etc for indoor / outdoor transformer of following sizes
-
-
-
... More
(a) 100-200KVA
3
-
-
... More
(b) 250-500 KVA
4
-
-
... More
S&F in replacement porcelain insulating bush of transformer HT 11 KV conical bush / gasket for indoor / outdoor size upto 500 KVA complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
S&F in replacement silica gel breather assembly having iron cap at top & bottom and tighten with suitable size of nuts & bolts filled with silica gel for size of transformer 100 KVA to 500 KVA all as specified and directed by Engineer-in-charge
10
-
-
... More
S& F in replacement refilling of silica gel in existing servicable breather assy complete all as directed by Engineerin charge
5
-
-
... More
M&L for Dehydration including filtration and cleaning of transformer/Voltage Stabliser at site by dehydration machine till to achieve Di-electric strength 60 KV at 2.5 mm gap including testing of sample before and after dehydration and filtration complete all as specified and as directed by Engineer-in-charge. NOTE : -(i)Contractor has to arrange the dehydration machine and testing kit without any extra cost.
(ii). Labour for draining out of oil & refilling the same is deemed to be included in quoted rates. (iii)Cost of minor spares ie nut bolt and washer if required to complete the job is deemed to be included in quoted rates.
7000
-
-
... More
Supply & Filling transformer oil low viscosity type conforming to IS-335 (Latest revision) for topping up of transformer (having dielectric strength 60 KV with 2.5mm gap) complete all as specified and as directed by Engineer-in-charge
418
-
-
... More
M&L for replacement of defective tap changer with tapping arrangement 5% and 7.5% on normal tapping complete all as specified and as directed by Engineer-in-charge
2
-
-
... More
M&L for replacement of gun metal gate valve with iron iron wheel head of 25/20 mm dia heavy duty ISI marked complete incl providing necessary rubber packing to stop leakage complete all as specified and as directed by Engineer-in-charge
4
-
-
... More
M&L for replacement to unserviceable synthetic rubberized corksheet/gasket of 6mm thick for fixing top cover and HT / LT side transformer bushes of following capacity
-
-
-
... More
(a) 100-200KVA
2
-
-
... More
(b) 250-500 KVA
2
-
-
... More
M&L for preparation of old painted surface of steel surface by brushing / cleaning strain grease / oily spots with thinner and two coats of spray painting with spray machine to transformer indoor / outdoor fixed on pole or in sub stn at different location capacity upto 500 KVA including writing SM No, MES No and capacity of transformer complete all as specified and as directed by Engineer-in-charge
8
-
-
... More
M & L in replacement of temperature gauge of range 0-100 degree celcius complete all as specified and as directed by Engineer-in-charge
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%