Military Engineer Services Tender

Material and labour for preparing unsurfacedwater bound mecadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags and mechanical compressor to remove all loose dirts etc and applying evenly a tack coat with bituminous primer at 10Kg per 10 Sqm with paving bitumen complete all as specified and directed by Engr-in-Charge. Paving bitumen VG - 30 grade

Material and labour for dense bituminous macadam not exceeding 50mm consolidated thickness using hot mix plant and mechanical paver with min 4% binder (paving bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power rolled 8 to 10 tonnes to required cambar and gradient complete all as specified and directed by Engr-in-Charge. Note :- 1. Works to be carried in places and also patch repairs to depressions over 50 mm shall be carried out under this item. Rate under this item includes for cleaning the surface of pot holes and depressions and removing of the rubbish meterials as per site requirement. 2. Prepatation of mix in hot mix plant spreading by self propelling mechanical paver and rolling and compaction by set of rollers/vibrator as specified in particular specifications shall be carried out in hot mix plant which may be installed at distance as per norms but contractor shall be responsible to maintain the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no deley in completion of work shall be acceptable. 3. During transit of material from hot mix plant to site shall be covered by tarpolin/ necessary covering.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags and mechanical compressor to remove all loose dirts etc and applying evenly a tack coat with bituminous primer at 5Kg per 10 Sqm with paving bitumen complete all as specified and directed by Engr-in-Charge. Paving bitumen VG - 30 grade

Preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags and mechanical compressor to remove all loose dirts etc and laying bituminious premix asphaltic semi dense corcrete 40 mm consolidated thickness with 5.5 % binder (As per design mix) content by weight of total mix laid by mechanical paver, rolled and compacted to required camber and gradient complete and rolling to uniform smooth surface with 8 to 10 tonne power road roller complete all as specified and directed by Engr-in-Charge.

Repair to pot holes any depth , not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous emulsion SS-1 @ 5kg/10 sqm, putting in premixed bituminous macadam (minimum binder content of 4% by weight of total mix as per design mix) well rammed and sealed with binder 9.80 kg/10 sqm, blinded with 0.09 cum of stone chippings, 6.30mm size and again well rammed (including supply & laying premixed macadam binder and chippings), depth of pot holes n exc 30 mm complete all as per IRC specifications complete all as specified and directed by Engr-in-Charge.

Providing and laying Asphalt painting on B.T. surface with bitumen grade VG-30 at the rate of 5.00 kg / 10 sqm by Mechanical sprayer & spreading the stone dust on prepared surface at the rate of 0.03 cum / 10 sqm & rolling with smooth wheel & pneumatic tyred roller with smooth wheel & pneumatic tyred roller & brushing etc complete all as specified and directed by Engr-in-Charge.

Providing and applying minimum 2.0mm thick road marking strips (retro reflective) n exc 10cm wide of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as per direction of Engineer-in-Charge and accordance with applicable specifications.

S & F in repair PVC Road stud (cat eye) of size 125mm X 125 mm X 25mm, including adhesive solution on the pavement complete all as specified and directed.

S&F in repair Solar Studs 135x105x26 mm made of Aluminum frame with mix epoxy filler of approved colour having beaing strenght of minimum 20 tons including removing damaged/old studs.complete all as specified and directed. Make: SOLAR/SIMPSON/EL 805A/ALEXIS 1901/DIGTMAX/3M or equivalent make as approved by GE.

S & F in repairs solar Delinators 1000x47 mm made of Polycarbonate and toughened aluminium body of height 145 mm, diameter 80 mm comprising of 04 super bright LEDs which gives 260 degree viewing with solar panel 2.5 V, 120 mm (approx) 1.25 V rechargeable battery complete all as specified and directed by Engr-In-Charge.