Military Engineer Services Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Costs
EMD
₹ 1,88,670Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Special Repair To Concertina Coil, Shaft Space And Hermitage At Naval Base
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_678565_1Tender No
9267/PBR/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://https://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SPECIAL REPAIR TO CONCERTINA COIL, SHAFT SPACE AND HERMITAGE AT NAVAL BASE PORBANDAR UNDER GE NAVY PORBANDAR
Tender General Pages, Special Conditions and Particular Specifications of Contract
BOQ Items
Excavation in trenches,n.exc. 1.5m wide and n.exc. 1.5m in depth for foundations etc. n.exc. 10 Sqm on plan and getting out in Hard / Dense soil.
18
-
-
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25cm in Hard/Dense soil.
5.4
-
-
Removing excavated material exc 250 m but n exc 500m and depositing where directed at a leval n exc 1.5m above the starting point.
12.6
-
-
M&L for use & waste of form work for rough finished surface to edges of concrete flat, break in floor, cills, railings etc.& similar works, exc 5cm but n exc 10cm wide complete all as specified and directed.
4000
-
-
M&L for use & waste of formwork to sides of squar, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete flat complete all as specified and directed.
85
-
-
M & L for RCC type M-30 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves etc, complete all as specified and as directed.
6.5
-
-
M & L for RCC type M-30 (using 20 mm graded stone aggregate) as in Chajjas complete all as specified and as directed.
4.2
-
-
M & L for precast RCC cover slab for drain in 1:2:4,Type B1 (20mm graded aggregate) set in cement mortar 1:6 complete all as directed by the Engr-in-Charge
1
-
-
M&L for precast reinforced cement concrete M-15, factory made including reinforcement of required size using 20mm graded stone aggregate set in CM(1:4) as in cover slab ( for manhole etc)including use & waste of form work for fair finished surfaces complete all as specified and directed.
3.5
-
-
M & L for 50mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection,Floor topping etc, surfaces finished of concrete flooring with brooming complete all as spd u including provision of necessary construction joints complete all as directed by Engr-in-Charge.
256
-
-
M&L cement concrete 1:4 :8 type D-2 (40mm graded agg) in foundation filling and mass concrete complete all as specified and as directed by Engineer in Charge.
6
-
-
M& L for PCC 1:2:4, type B1 (using 20mm graded stone agg) as in coping, bed blocks, concrete for embedding the angle fencing posts and similar work complete all as specified and directed.
30
-
-
M&L for PCC 1:3:6 type C-2 for 150 mm dia pipe bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested, including filling complete all as specified and directed.
25
-
-
Dismantling of post and struts (wood,steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.
344
-
-
S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed.
1130
-
-
All as per above item No 18.00, but 6 to 8 mm dia in stirrups complete all as specified and directed.
630
-
-
M&L for hand rails, half round or other stock section or core for wooden hand-rail straight portion,Gates , Grating drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer in Charge.
1548
-
-
S & F in repair to Framed work ( Fe 410 -W(Gde-E- 250) quality-A) as in doors, gates, truss of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as spd and directed by Engineer in Charge.
9440
-
-
S&F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer_x0002_in-charge
135
-
-
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling all as specfied and directed
400
-
-
M&L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified and as directed by Engineer-in-Charge.
460
-
-
M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified.
469
-
-
M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified.
183
-
-
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white primer complete all as specified and directed.
272
-
-
M&L for preparation of old decorated surfaces of walls incl scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of cement base paint complete all as specified and directed by Engr-in-charge.
6982
-
-
Material and labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
30
-
-
Material and labour for preparation of old surfaces of ceiling including cornicess plaster etc for lime wash (white washing) and applying one coat of white wash on ceiling complete all as specified and as directed.
50
-
-
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
110
-
-
Material and labour for preparation of old wooden surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint complete all as specified and as directed.
60
-
-
M&L two coats of white wash on newly plastered surfaces of walls including of preparation of surfaces, complete all as directed.
30
-
-
M& L for preparation of old plastered surfaces of wall by complete removal of existing treatment and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour as per manufacturer's specification complete all as specified and directed
180
-
-
M& L for preparation of old plastered surfaces of wall by complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm to prepare the surface even and smooth of required shade and colour as per manufacturer's specification complete all as specified and directed.
150
-
-
M& L for applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour as per manufacturer's specification complete all as specified and directed
120
-
-
M& L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces to prepare the surface even and smooth of required shade and colour as per manufacturer's specification complete all as specified and directed.
120
-
-
M & L for Complete removal of existing treatment on wall surfaces incl necessary taking down and wirebrush the surfaces to remove existing paint & putty, snowcem etc on external wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. complete all as per manufacturer's instructions and as directed by Engineer-in-Charge. (Note : Work is to be carried out in building upto G+6 and G+8 stories)
3110.4
-
-
S&F Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat/curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including any sunk or raised mouldings (fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed
80
-
-
M & L for wall care putty 3mm thk on Ceiling and applying two coats of oil bound distemper all as specified directed by Engr in charge
80
-
-
S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing ortying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) as in repair Complete all as spd and directed by Engineer in Charge
120
-
-
S&F in repairs concertina coil , punched tape 2.60 mm dia high tensile spring steel wire, dia of coil 600mm, when stretched the length shall be 6.00m in one coil, (weight of coil shall not less than 1.30kg/m) and tied to barbed wire with and including provision of steel clips @ 5 clips spiral in one row complete without coating and taking down old concertina coil .all as directed by Engr-in-Charge.
15094.33
-
-
Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete artilcles and precast concrete block walling etc. Complete all as specified and directed.
28
-
-
M&L Squared rubble walling with Porbandar stone masonary in CM 1:6 brought to courses, complete all as specified & directed by Engr-in-charge.
23.5
-
-
Ditto as above item No. 44.00 but except stone, complete all as specified and directed.
5.5
-
-
Taking down cement plaster of any description on brick or stone walls etc. incl raking out joints, hacking for key, scrubbing down with water all as specified or as directed.
330
-
-
Material and Labour for 15mm thick rendering on fair faces of brick/ stone work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and as directed.
547
-
-
Material and Labour for 5mm thick rendering on concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement on ceiling complete all as specified and as directed.
150
-
-
S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
216
-
-
S&F in repair PVC (SWR) pipes single socketed in any length with necessary joints laid in trenches of nominal bore 150mm including excavation and dismantling of old pipe complete all as specified and directed.
20
-
-
S&F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to wall including fitting complete fixtures complete all as specified and directed.
920
-
-
S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including fitting complete fixtures complete all as specified and directed.
111
-
-
S&F in repairs PVC (SWR) floor trap, plainwith grating including jointing with solvent cement complete all as specified and directed.
96
-
-
S&F in repair PVC (SWR) bends any radius laid in trenches of nominal bore 150mm complete all as specified and directed.
10
-
-
S&F in repair PVC (SWR) bends with cap any radius of nominal bore 110mm complete all as specified and directed.
5
-
-
S&F in repair PVC (SWR) bends with cap any radius of nominal bore 75mm complete all as specified and directed.
3
-
-
S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal of nominal bore 110mm complete all as specified and directed.
5
-
-
S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal of nominal bore 75mm complete all as specified and directed.
3
-
-
S&F in repair PVC (SWR) junction single, (Single T) equal or unequal of nominal bore 110mm complete all as specified and directed.
5
-
-
S&F in repair PVC (SWR) junction single, (Single T) equal or unequal of nominal bore 75mm complete all as specified and directed.
3
-
-
S&F in repairs 20mm mesh wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples fixtures complete all as specified and directed.
2880
-
-
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store complete all as specified and directed.
20
-
-
Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified and directed.
2
-
-
S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
0.3
-
-
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
6.3
-
-
S&F factory made 30mm 2 class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
9.45
-
-
S&F fiber glass reinforced plastic (FRP) door frames of three legged of cross section 90 x 45 mm having single rebate of 32 x 15 mm to receive shutter of 30 mm thick. The laminate door frame moulded with fire retardent grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block of 2nd Class Hardwood in all the three legs. The frame shall be covered with fibre glass from all side M.S stay shall be provided at the bottom to sedy the frame complete as per direction of Engineer - in - Charge.
9.6
-
-
S&F 30 mm thick glass fiber reinforced plastics paneled door shutter of required colour & approved colour and manufactrures made with fire retardent grade unsaturated polister resin,moulded to 3mm thick FRP laminate for forming hollow rails & styles with wooden frame & suitable blocks of seasoned wood inside at required places for fixing of fittings along with MS tube frame of 19 gauge all around the styles & rails duly coated with steer primer cast monolithically with 5mm thick FRP laminate for panels & conforming to IS:14856:2000 including fixing to frames. The shade & colour shall be approved by Engineer-in-Charge
3.2
-
-
S&F in repair 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
4
-
-
S&F in repair 250mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
4
-
-
S&F in repair 200mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed.
2
-
-
S&F in repair 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified.
2
-
-
Providing and applying of silicon sealent in construction joint, window glass,polycarbonate sheets and required places to make joints water tights, after racking out of joints/cracks wherever necessary & throughout cleaning at different level complete all as specified and as directed by Engineer-In-Charge.
60
-
-
S&F in repair powdercoated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified
42
-
-
S & F Plain colour PVC sheet 2mm thick fixed or laid on to aluminium doors by using rubber based adhesive, supplying & fixing at site as per specification
10
-
-
S&F in repairs powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
102
-
-
S&F in repairs Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified.
54
-
-
S&F 12 mm thick toughened glass for door, partition etc. of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top, bottom and sides, lock and handles, spider joint etc. and floor door spring as per requirement all as specified, required at site by manufacturer instructions and complete all as specified and directed.
14.7
-
-
S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane all as specified and as directed
36
-
-
M&L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers exc 1.5 sqm
36
-
-
Refixing aluminium decogrills in the same opening including cutting of decogrills if required etc all as directed
36
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premisess complete all as specified and as directed
80
-
-
M&L for non-skid ceramic tiles, white/coloured (of approved shade and design), 7 to 8mm thick, of superior quality, square / rectangular (area exceeding 0.06 Sqm but not exceeding 0.11 Sqm) joint free, as in floors, etc.set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:6) complete all as specified and as directed
40
-
-
M&L for coloured Glazed ceramic tiles,of size 300x200x 7 to 8mm thick of superior quality fixed on vertical surfaces such as skirting / dado / risers of step etc.,set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles fixed over & including backing coat of 10mm thick plaster in CM (1:4) complete all as specified and as directed.
15
-
-
M&L for Light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design), 10mm thick, of superior quality, (square / rectangular) polished, area of each tiles not exceeding 0.36sqm,joint free, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles ,laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
40
-
-
Ditto as above item No 85.00, but Dark shade vitrified tiles
20
-
-
Ditto as item 85.00 but vitrified tiles in vertical surfaces such as skirting, dados etc including backing coat 10mm thick in cement mortar 1:3 finished even and rough for receiving tiles complete all as specified.
20
-
-
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, compound wall etc. laid dry beded in any mortor complete all as specified.
3.9
-
-
M&L 20mm thick Granite work in steps, jambs, pillars, window-cills, cooking platforms laid over CM 1:4 , 15mm tk cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified
120
-
-
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
15
-
-
Repair to door, window , ventilator by spot welding in repairs exceeding 2.50 cm but not exceeding 5.0 cm in length thickness of metal to be welded not exceeding 6.0mm thick, complete all as specified and as directed by Engr in charge. Note : Welding work will be carried at site by arrangement of welding machine without any extra cost to the Govt
100
-
-
S & F in repair to 18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter , shelves etc including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edging complete all as specified.
20
-
-
S&F of continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps complete all as specified and directed.
25
-
-
Repair and refixing of aluminium window shutter to make it openable/slide smoothly, including cutting, repair/change of all necessary fittings/fixtures for window like cleates , locking arrangements glazing cleats and cadmium plated stainless steel screws including rubber gaskets beadings etc complete all as specified and as directed by Engr in charge
20
-
-
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed
30
-
-
S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
66.8
-
-
Disconnecting existing tanks upto 1000 ltr Cap , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position with Cleaning , repairing,incl complete connection with inlet and outlet with GI / CPVC pipe fitting , Float valve etc Complete all as spd and as directed by Engineer in Charge
3
-
-
S&F in repair Rotational moulded polyethylene water storage tanks of cap 1000 Ltr Cap (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I Complete all as spd and as directed by Engineer in Charge
3
-
-
Dismantling boarding, any description, fixed in any position with screws complete all as specified & directed by Engr-in-charge.
80
-
-
S&F anodised aluminium snap grid frame work for false ceiling all as specified complete all as specified & directed by Engr-in-charge.
80
-
-
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling snap grid of size 605 x 605 mm complete all as specified and directed by Engr in Charge.
80
-
-
S&F 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified.
3
-
-
S&F in repair Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified.
2
-
-
S&F in repair Vitreous China soap tray embedded in the wall complete all as specified.
6
-
-
S&F in repair Glass shelf assembly complete all as specified.
6
-
-
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.
2
-
-
M&L for 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.
4
-
-
S&F in repairs Waste fittings,32 mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
1
-
-
S&F in repairs Waste fittings,40 mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed
1
-
-
S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for European / Anglo indian type WC all as specified and directed. Make:- Cera or equivalent
2
-
-
Taking down carefully serviceable bib taps/ bib cock of any pattern or any type, fixed for 15mm bore pipe and replacement of washers, faces, jumpers, spindles and chromium plated caps including re-fixing the same after necessary repairs, complete all as specified and as directed by Engineer-In-Charge.
Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed to be included in quoted rate.
8
-
-
Taking down carefully serviceable stop cock/ angle cock/gate valve of any pattern or any type, fixed for 15mm bore pipe and replacement of washers, faces, jumpers, spindles and chromium plated caps including re-fixing the same after necessary repairs, complete all as specified and as directed by Engineer-In-Charge.
Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed to be included in quoted rate.
8
-
-
Taking down carefully serviceable health faucet/ Jet spray/PVC connection pipe of any pattern or any type, fixed for 15mm bore pipe and cleaning and prevent leakage including replacement of washers and re-fixing the same after necessary repairs, complete all as specified and as directed by Engineer-In-Charge.
Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed to be included in quoted rate.
4
-
-
Taking down carefully serviceable 2 way wall mixer/ WHB mixer of any pattern or any type, fixed for 15mm bore pipe and cleaning and repair to prevent leakage including replacement of washers and re-fixing the same after necessary repairs, complete all as specified and as directed by Engineer-In-Charge.
Note: Cost of tools, plants, spare parts, thread and sealing materials shall be deemed to be included in quoted rate.
4
-
-
Taking down old roof treatment of any description including plaster, cement concrete etc. and removing old material outside MD land exc 1Km and not exceeding 5 Km completely all as specified and directed by Engineer - in - Charge.
150
-
-
M&L for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and as directed. (Note:- Polymeric membrane will be measured and paid separately)
150
-
-
Supply only integral waterproofing compound
58
-
-
M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/ specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 4 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non wovwn polyster fabric or weight not less 160 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm minimum) and then inserted insde the groove of parapet wall and shall be finished by a membrane flashing. (Note:- (i) Laying of APP based membrane shall be done by torch on method or as per manufacturers instruction. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instruction. (c ) Applying two coats of reflective Bituminous aluminium paint on top of APP membrane.
150
-
-
M&L for Special treatment of sunken portion of WCs, Bath room etc as per following stages upto depth 50cm depth :
Stage 1: Demolition/Dismantling of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc .
Stage 2:- Providing 10mm thick plaster in CM 1:4 with chemical of plaster seal.
Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd(and allow to dry for 8 hours) under touch dry condition
Stage 4:- Applying two coats of water proofing of Dr Fixit Pidicrete for the sunken portion of toilets/bathrooms (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufactutrer instruction
Stage 5:-Again rendering 10mm thick in CM 1:4 mixed with Dr Fixit Pidicrete URP or plaster seal of STP Ltd.
Stage 6. All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP
Stage 7. Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof and layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.0 Kgs per Sqm, reinforced with non woven polyster fabric or weight not less 160 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm minimum) and then inserted insde the groove of parapet wall and shall be finished by a membrane flashing. Stage 8:- Making holes in wall and fixing 600mm long 25mm dia GI spout for draining the surplus water if any. Make : Dr Fixit ,Krishna, Sika ,Chemistik or Equallent make approved by GE
30
-
-
S&F ball valves, high pressure of PTMT with epoxy coated aluminium long rod & highdensity plastic big ball screwed for iron pipe including necessary extension nipple and tank nipple suitable for HDPE water tank with check nut complete and fixed of the following size as in repair :-
-
-
-
15 mm bore
4
-
-
20 mm bore
4
-
-
25 mm bore
4
-
-
M&L for Sand filling under paver blocks for cushion Complete all as specified and directed.
3
-
-
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment to match, Complete all as specified and directed.
40
-
-
All as per above item No 122.00 Except Interlocking tiles including filling with sand cushioning ( where ever required ) including leveled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge. ( Note :- Sand and PCC shall be paid and measured Separately )
20
-
-
M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, for 150mm dia complete all as specified and directed
6
-
-
M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of nominal dia 150mm complete all as specified and directed
35
-
-
Taking down old point wiring complete for (light, fan, socket 5/15 amps, bell point etc) complete with all light fittings accessories , such as switches,sockets 5/15 Amps, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc all as specified and directed by Engineer -In-Charge.
193
-
-
M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable FRLSH of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width/in concealed conduit non metallic , rigid PVC conduit of adequated size with all fittings and conduit accessories including suitable size modular metal flush box and modular white cover plate with frame for housing the switches,socket outlets ,including all necessary wall cutting and making good disturbed surface all as directed and specified .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
-
-
-
One light point controlled by one, one way switch
94
-
-
One ceiling /exhaust fan point controlled by one switch and regulator
14
-
-
One bell/buzzer point controlled by one bell push.
8
-
-
One light point controlled by two 2-way switches
2
-
-
Ditto all as per item No 127.00 but wire 2.5 sqmm One 3 pin 5 amp socket out point on the independent board
18
-
-
Ditto all as per item No 127.00 but wire 2.5 sqmm One3 pin 5 amps socket out let point on same board with other switches.
37
-
-
All as per same in item No 127.00 above but for one socket outlet 15 amp on independent board with 4.0 Sq. mm cable and 4.0 Sq.mm. earth wire.
20
-
-
S & F in replacement of Modular switch 1 way 6A, 1 module all as specified and directed by EIC.
163
-
-
S & F in replacement of Modular switch 2 way 6A, 1 module all as specified and directed by EIC.
4
-
-
S & F in replacement of modular socket, 6A - 2/3 pin combined 2 module all as specified and directed by EIC.
55
-
-
S & F in replacement of Modular switch 1 way 16A, 1 module all as specified and directed by EIC.
12
-
-
S & F in replacement of Modular socket 16A - 2/3 pin combined 2 module, all as specified and directed by EIC.
12
-
-
S & F in replacement of Modular fan regulator 120 Watt, 2- module , AC 240 Volts complete.
7
-
-
S & F in replacement of Modular Bell push 6A 1 module all as specified and directed by EIC.
8
-
-
S & F in replacement Call bell AC-230 Volt single pole ding dong
8
-
-
S & F in replacement Ceiling rose, surface bakelite 65x50 mm three terminal
38
-
-
S & F in replacement of earth enclosure with 2 pin earth plug socket complete with MCB SP 25 amp,flush mounting type
8
-
-
Taking down fan of any make/type/sweep,sealing cable end ,dismantling of blades and for repair /overhauling complete all as directed
8
-
-
M &L for Overhauling of ceiling fan /wall fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, resembling the same and testing on completion all as specified and as directed
8
-
-
S & F in replacement Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours. connecting up with 3 core flexible copper conductor cable with suitable size from ceiling rose complete all as directed by Engr-In-Charge.
24
-
-
S & F in replacement LED tube light fittings mirror type with high output diffuser 2 feet ,1x10 Watt ,220V, AC decorative box type with driver,holder including LED Tube light connecting up with flexible copper conductor cable with suitable size from ceiling rose complete all as directed by Engr-In-Charge.
6
-
-
S & F in replacement of LED street light fittings 1x25 Watt , 230V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, surge protector with intact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection including suitable size GI bracket of suitable length and clamps, nut ,bolts etc complete all as directed by Engr-In-Charge. Make:- Crompton Cat Part No:- LSTS-25 -CDL-M/equivalent in wipro/bajaj
8
-
-
S & F in replacement of LED down light 1x15 Watt 220V, Slim, compact, aluminum die cast edge panel square /round fixture with opal diffuser and separate electronic driver connecting up with 3 core flexible copper conductor cable with suitable size from ceiling rose /junction complete all as directed by Engr-In-Charge.
30
-
-
S & F in replacement of decorative wall light , gold finish fixture with white glass diffuser suitable for 2X 7.5 W led filament lamp E27 base including its lamp & connecting up with flexible copper conductor cable with suitable size complete all as directed by Engr-In-Charge. Make:-Havells Cat Part No LHFOAKD2TZ1D060 /equivalent in wipro/bajaj
10
-
-
S & F in replacement of LED post top 25 Watt made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic di user and IP65 protection including its lamp & connecting up with flexible copper conductor cable with suitable size complete all as directed by Engr-In-Charge. Make:-Bajaj Cat Part No (BGCTN 25W LED WW)/equivalent in wipro/Havells
4
-
-
S & F in replacement LED post top 25 Watt in spherical shape polycarbonate opal and clear di user with IP65/66 protection including its lamp & connecting up with flexible copper conductor cable with suitable size complete all as directed by Engr-In-Charge. Make:-Bajaj Cat Part No (BLPTSP 25W WW LED )/equivalent in wipro/Havells
12
-
-
S& F in replacement of LED Bollard light 10W inverted Pyramid Tripod Type LED Bollard with soft 360 degree distribution with necessary mounting foundation and connecting with flexible copper cable of suitable size complete all as directed by Engr-In Charge
7
-
-
S& F in replacement of PVC insulated 3 core 1.5 sqmm multi stranded Copper conductor as specified & directed. Make:- Polycab/Havells/Gloster
180
-
-
S& F in replacement of PVC pipe 25 mm dia heavy duty inclusive of all tees,bends, elbows etc & fixing accessories
180
-
-
M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing strip of 4mm x 25 mm dia galvanised iron or steel strip all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion
8
-
-
S & F in replacement MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door
4
-
-
S & F in replacement MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps
4
-
-
S & F in replacement MCB SP 240 Volts 'C' series, breaking capacity 10 KA of rating 6-32 Amps
48
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%